kirtley sheet metal - berridge manufacturing co. and berridge manufacturing company, founded in...

BERRIDGE MANUFACTURING COMPANYVolume 17 no. 2 - Fall 2004

Featured Licensee: Kirtley Sheet MetalArchitect’s View: Ken Anderson & Associates

Featured Licensee:Kirtley Sheet Metal

Architect’s View:Ken Anderson & Associates

BERRIDGE MANUFACTURING COMPANYVolume 18 No. 2 - Spring 2005

EDITORIAL POLICYNews Releases, photographs and manuscripts regarding the application of Ber-ridge products are requested and should be submitted to the Editor, Berridge BY-LINE, and will be returned only if so requested in advance.

Editor: David J. Doyle, Vice President, Marketing

Jack. A. BerridgeChairman of the Board

THETHETHETHETHEINSIDEINSIDEINSIDEINSIDEINSIDESTORSTORSTORSTORSTORYYYYY

Jack BerridgeChairmanof the Board

Kirtley Sheet Metal:A Family Tradition ofHonesty, Integrity, Quality

Seated: Philip Kirtley, President; Standing, Left to Right: Connie Kirtley, Vice-President; DarrellKirtley, Head of Estimating; and Philip Kirtley Jr (P.J.), Project Manager.

the Berridgethe Berridgethe Berridgethe Berridgethe Berridge BBBBBYLINEYLINEYLINEYLINEYLINEBERRIDGE MANUFACTURING COMPANY1720 Maury Street, Houston, TX 77026 /1-800-231-8127 Fax 713-236-9422

Kirtley Sheet Metal was founded in 1981 by PhilipKirtley. The company installed built-up roofing, mainlyfor commercial buildings in the Houston area. Upon

forming his own company, Philip began a transition into therelatively new field on standing seam metal roofing. The trendof metal roofing was rapidly growing stronger in the Houstonarea and Berridge Manufacturing Company, founded in 1970,was establishing a reputation as a leader in the relativelynew field of architectural metal roofing. Kirtley Sheet Metalbegan to install various types of metal roofing, including somealuminum shake shingle jobs using Berridge products. Com-mercial projects which utilized standing seam roofing wouldcomprise the majority of Kirtley Sheet Metal’s metal roofingwork over the next three decades, while the firm also offeredseveral flat roofing products.. In the mid 90’s Kirtley Sheet Metal began using Berridgeportable roll forming equipment to fabricate continuous lengthstanding seam metal roofing panels, and thus began a newprocess which would virtually revolutionize the company’smode of operation. Phillip Kirtley describes the transition tosite-forming: “We found there was no comparison with buy-ing factory-made standing seam panels from other compa-nies -- with site forming our own panels, there is no waitingfor delivery and we are in control of the job schedule from

The backbone of our economy is the family-owned business and Kirtley Sheet Metal of Tomball,Texas is an outstanding example of a highly suc-cessful family owned and operated roofing andsheet metal company. Kirtley’s tradition of honesty,integrity and utmost quality is evident in everyproject they complete as shown in this issue.Berridge provides Kirtley Sheet Metal with full sup-port, including light gauge steel framing design as-sistance on large retrofit projects like those picturedin this issue. Kirtley Sheet Metal’s two Berridgeportable roll formers give them full production con-trol of exact-length standing seam roof panels tomeet their client’s requirements. The architectural firm spotlighted in the“Architect’s View” section of this BYLINE is KenAnderson and Associates of The Woodlands,Texas. This family owned design firm is the mostprestigious architectural firm in the unique self-con-tained city and surrounding wooded residential com-munity situated thirty miles north of Houston, Texas.Ken Anderson Associates have won a number ofdesign awards for their environmentally-friendlydesign solutions and when it comes to standingseam metal roofing, their first choice is Berridge.

Photo Captions:1. Philip Kirtley (L) receives a Berridge“Customer of Distinction” award for2004 from Mark Tice, Berridge RegionalSales Manager.

2. Estimating & Project Managementand Field Operations:L-R: Philip Jr (P.J.), Project Managerand Darrel Kirtley, Head of Estimating.

3. Estimating & Project ManagementTeam: (L-R): Brad Maurain; DarrelKirtley and Buddy Lawrence.

4. Sheet Metal Shop & Portable RollForming Deparment (L-R): AnthonyBridgewater; Jay Eckert; Kade Garner

5. Receptionist:Beth Kirtley, Receptionist (left) shownwith Connie Kirtley, Vice President.

6. Warranty Administration:As Kirtley’s Warranty Administrator,Elaina Hartley processes all productwarranties for projects sold by KirtleySheet Metal which require them.

Left:The cover of this issue featurespersonnel, equipment andoutstanding projects by KirtleySheet Metal

1

start to finish!” Kirtley Sheet Metal purchased a Berridge Model SS-14 Tee-Panel Standing Seam portable roll former in 2001 and a ModelCL-21 Cee-Lock Standing Seam portable roll former in 2002.They utilize their portable roll formers both in the shop and atthe job site for panels longer than forty feet. Kirtley’s modernsheet metal shop is also equipped with a computerized sheetmetal brake for fabrication of custom flashing, coping, trim,gutters and downspout accessories to complete the job.

“We found there was no comparison withbuying factory-made standing seam pan-els from other companies -- with siteforming our own panels, there is no wait-ing for delivery and we are in control ofthe job schedule from start to finish!”

Today, Kirtley Sheet Metal is a family-owned and operatedbusiness whose keys to success are honesty, integrity andunwavering dedication to quality. Philip Kirtley is President,his wife Connie is Vice President. Both of Phillip’s sons arealso active in the business: Darrel Kirtley is Head of Estimat-ing while Philip Jr. (P.J.) is Project Manager. Daughter BethKirtley is the company’s receptionist.

1 2 3

4

5

6

KIRTLEY SHEET METAL INC.

Photos by Allan Ray Photography.Com where noted

General Contractor:Architect :

Berridge Licensee:Berridge Products:

Texas Dept of Transportation, Yoakum, TXBob Van Ermel Scherer, TxDOT, Austin, TXKirtley Sheet MetalBerridge Vantage Point Retrofit Light GaugeFraming System; Zee-lock Standing SeamRoof; Flush Seam fascia & soffit panelsColor Finishes: Colonial Red Roof Panels;Parchment fascia & soffit (Kynar 500)

Top & Top Right:TEXAS DEPARTMENT OF TRANSPORTATION - RETROFITLa Grange, TX

General Contractor:Architect - Engineer:


Top Left: 69th STREET WASTE WATER TREATMENT CENTERHouston, TX

Construction, LTD, Houston, TXS&B Infrastructure, Houston, TXKirtley Sheet MetalBerridge Vantage Point Retrofit Light GaugeFraming System; Zee-lock Standing Seam Roof;Thin-Line Soffit PanelsColor Finish: Medium Bronze Kynar 500



Middle Left: PASADENA FIRE STATION #10Pasadena, TX

DT Construction, Houston, TXDansby & Miller Architects, Houston, TXKirtley Sheet MetalBerridge Zee-Lock Standing SeamColor Finish: Forest Green Kynar 500



Bottom Left: ORAL & MAXILLO FASCIAL SURGEONS, SW, PCSugar Land, TX

Farmsworth & Lott, Pearland, TXBrowne Penland McGregor Stevens, Houston, TKirtley Sheet MetalBerridge Batten Seam RoofColor Finish: Charcoal Grey Kynar 500

Allan Ray Photography.com



General Contractor:Architect :


Tarken Builders, LTD, Houston, TXNelsen Architects, Scottsdale, AZKirtley Sheet MetalBerridge Classic ShinglesKynar 500 Aged Bronze

Top & Top Right: TOMMY BAHAMAThe Woodlands, TX

TX



Above Left: BANK ONETomball, TX

Spectrum Const. Svcs, Inc., Houston, TXGraeber Simmons Cowan Archts, Austin, TXKirtley Sheet MetalBerridge Tee-Panel Standing Seam RoofFinish: Royal Blue Kynar 500



Above Right: FIRST AMERICAN BANK - CYPRESSWOODHouston, TX

Terramark Const., Sugar Land, TXMcCleary German & Assoc., Houston, TXKirtley Sheet MetalBerridge Cee-Lock Standing Seam RoofFinish: Aged Bronze Kynar 500



Middle Right: SOUTHTRUST BANKBaytown, TX

Regas Contracting, Stafford, TXZiegler Cooper, Houston, TXKirtley Sheet MetalBerridge Cee-Lock Standing Seam RoofFinish: Zinc Grey Kynar 500



Top Left: WELLS FARGO BANKHouston, TX

Regas Contracting, Stafford, TXSG Design, Inc., Dallas, TXKirtley Sheet MetalBerridge Cee-Lock Standing Seam RoofFinish: Buckskin Kynar 500

Allan Ray Photography.com Allan Ray Photography.com





A R

C H

I T

E C

T’ S V

I E

W

Ken Anderson & Associates Architects Staff:Seated, Left to Right: Rudi Anderson, Office Administrator; Ken Anderson, Architect;Kristin Schutze, Design Associate; Matt Swanson, Architect. Standing, Left to Right: KayeAnderson, Commercial Property Administrator; Milly Baillie, Permit Administrator; RichardTurner, Production Manager; Rose Matranga, Plat Administrator; and Lisa Anderson,Senior Permit Administrator.

When Ken Anderson went to work for the new architec-tural firm Terradevco in 1973, the main thoroughfare

leading into The Woodlands, Texas was a dirt road. Ken’s firstjob as an Intern Architect/Draftsman was to prepare construc-tion documents for the first buildings to be built in the newwooded community which is located thirty miles North of Hous-ton, Texas. In the thirty-two years that have followed KenAnderson has formed his own “Woodlands Friendly” firm, fol-lowing the local motto: “Live, Work and Play in The Wood-lands”. Now celebrating their twenty-fifth Silver Anniversary, KenAnderson & Associates, Inc. is a full service architectural firmwith project experience encompassing Parks, Medical Facili-ties, Churches, Commercial, Multi-Family, Offices, Retail,Restaurants, and more. Eighty percent of Anderson’s work isin The Woodlands and the firm is recognized as the premierarchitectural firm in the area. Ken Anderson describes his firmas a very “hands-on” company and as principal he still works

Top Right:Administrative Staff:

Seated: Rudi Anderson, Office Administrator.Standing, Left to Right: Rose Matranga; Lisa

Anderson; Milly Baillie and Kaye Anderson

Bottom Right:Architectural Staff:

Left to Right: Richard Turner, Production Manager;Matt Swanson, Architect; Ken Anderson, Architect;

and Kristin Schutze, Design Associate

continued on next page

directly with the client, including preparation of draw-ings. In describing his work with metal roofing in gen-eral and Berridge metal roofing products in particu-lar, Ken notes: “Berridge metal roofing is everywhereyou look in The Woodlands -- We’ve built dozens ofpark shelters and other structures and ninety per-cent of them have Berridge roofs.” The Windsor LakeCommunity Center featured in this article utilizedBerridge’s Cee-Lock Standing Seam roof system.Several other Ken Anderson & Associates projectsare also shown.

Ken Anderson & Associates Projectsin The Woodlands, Texas

Top : WINDSOR LAKE COMMUNITY CENTERArchitect:

General Contractor:Berridge Licensee:Berridge Products:

Ken Anderson & Associates, Inc.Camden Construction, Houston, TXKirtley Sheet Metal, Tomball, TXBerridge Cee-Lock Standing Seam RoofColonial Red Kynar 500

Other Projects in The Woodlands Designed byKen Anderson & Associates

Top Right:MEADOWLAKE PARK SHELTER

Middle Right :EVERGREEN PARK SHELTER

Bottom Right :NORTHLAKE PARK PAVILION


PRESORTEDSTANDARD

U.S. POSTAGEPAID

HOUSTON,TEXAS

PERMIT NO. 3399

BERRIDGE BERRIDGE BERRIDGE BERRIDGE BERRIDGEMANUF MANUF MANUF MANUF MANUFACTURING ACTURING ACTURING ACTURING ACTURINGCOMP COMP COMP COMP COMPANY ANY ANY ANY ANY1720 Maury St.Houston, Texas 77026800-231-8127 / www.berridge.com

www.berridge.com

PROJECT ARCHTS

DESIGN DEPARTMENT

SPEC WRITER

PLEASE R PLEASE R PLEASE R PLEASE R PLEASE ROUTE: OUTE: OUTE: OUTE: OUTE:



Top : HERITAGE GRAND AT CINCO RANCHKaty, TX

Camden Construction, Houston, TXSDT Architects, Houston, TXKirtley Sheet MetalBerridge Cee-Lock Standing Seam RoofFinish: Charcoal Grey Kynar 500



Right: DR. JAFAR OFFICE BUILDINGSugar Land, TX

TDK Construction, Houston, TXSterling Engineers & Design Group, Houston, TXKirtley Sheet MetalBerridge Cee-Lock Standing Seam RoofFinish: Hemlock Green Kynar 500



kirtley sheet metal - berridge manufacturing co. and berridge manufacturing company, founded in...

Documents