kit 1507 20 decal placement - revell · 2020. 8. 31. · decal 23 decal 23 42 mud flaps semi gloss...

12
Semi Gloss Black Flat Tan Gloss Blue Yellow Gloss Orange Aluminum Silver Steel Turn Signal Amber Transparent Red * REPEAT SEVERAL TIMES * A REPETER PLUSIEURS FOIS * CEMENT TOGETHER * A COLLER * ALTERNATIVE ASSEMBLY * ENSEMBLAGE ALTERNATIVE * REMOVE AND THROW AWAY * A RETIRER ET JETER * DO NOT CEMENT * NE PAS COLLER * OPTIONAL PARTS * PIECES EN OPTION * DECAL * DECAL COMANIE This paint guide is provided to complete this kit as shown on the box. Ce guide de peintures est fourni pour reproduire le modèle réduit qui apparaît sur la boîte. Noir satiné Havane mat Bleu brilliant Jaune Orange brilliant Aluminum Argent Acier Ambre Rouge Transparent * Study the assembly drawings. * Each plastic part is identified by a number. * In the assembly drawings, some parts will be marked by a star () to indicate chrome plated plastic. * For better paint and decal adhesion, wash the plastic parts in a mild detergent solution. Rinse and let air dry. * Check the fit of each piece before cementing in place. * Use only cement for polystyrene plastic. * Scrape plating and paint from areas to be cemented. * Allow paint to dry thoroughly before handling parts. * Any unused parts may be discarded. DECAL APPLICATION INSTRUCTIONS 1. Cut desired decal from sheet. 2. Dip decal in water for a few seconds. 3. Place wet decal on paper towel. 4. Wait until decal is movable on paper backing. 5. Place decal in position on model, face up and slide backing away. 6. Press out air bubbles with a soft damp cloth. 7. Milkiness that may appear is for better decal adhesion and will dry clear. Wipe away any excess adhesive. 8. Do not touch decal until fully dry. 9. Allow the decals 48 hours to dry before applying clear coat. NOTE: Decals are compatible with setting solutions or solvents. READ THIS BEFORE YOU BEGIN LIRE CE QUI SUIT AVANT DE COMMENCER * Etudier les schémas de montage. * Chaque pièce en plastique est identifiée par un numéro. * Sur les schémas de montage, certaines pièces sont marquées d'une étoile () pour indiquer qu'elles sont en plastique chromé. * Pour une meilleure prise de la peinture et des autocollants, laver les pièces en plastique avec une solution détergente peu concentrée. Les rincer et les laisser sécher à l'air. * Vérifier que chaque pièce s'ajuste bien avant de la coller en place. * N'utiliser que de la colle pour polystyrène. * Gratter les parties à coller pour enlever le chrome et la peinture. * Laisser la peinture bien sécher avant de manipuler les pièces. * Toute pièce inutilisée peut être jetée. DIRECTIVES D'APPLICATION DES AUTOCOLLANTS 1. Découper l'autocollant désiré de la feuille. 2. Tremper l'autocollant dans de l'eau pendant quelques secondes. 3. Placer l'autocollant mouillé sur une serviette en papier. 4. Attendez que l'autocollant puisse être déplacé sur son support en papier. 5. Mettre l'autocollant en position sur le modèle face sur le dessus et faire glisser le support pour l'enlever. 6. Appuyer avec un chiffon doux humide pour éliminer les bulles d'air. 7. La substance laiteuse qui peut apparaître est destinée à améliorer l'adhésion de l'autocollant et devient incolore au séchage. Essuyer pour enlever tout excédent d'adhésif. 8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec. 9. Laisser l'autocollant sécher pendant 48 heures avant d'appliquer une couche transparente. REMARQUE: Les autocollants sont compatibles avec les solutions de fixage ou les solvants. KENWORTH ® W900 KIT 1507 85150700200 If you have any questions or comments, call our hotline at: (800) 833-3570 or, please write to: Revell Inc Consumer Service Department, 1850 Howard Street Unit A, Elk Grove Village, Illinois 60007 Be sure to include the plan number (85150700200), part number, description, your return address and phone number. Visit our website: www.revell.com Revell Inc Elk Grove Village, IL. Copyright © 2009. All rights reserved. The Kenworth W900 has every- thing that long-haul truckers need to get the job done. This impres- sive Kenworth design sports a duel sleeper capped with an aerodynamic roofline which tells everyone who sees it that it is truly a road machine without equal. Your Revell model features a hood that tilts forward to show a detailed tubocharged six cylinder diesel engine, chrome plated sim- ulated alloy wheels, duel exhaust stacks, roof mounted horns and mirrors with antennas. Decals with optional stripes or cus- tom graphics are also included.

Upload: others

Post on 07-Mar-2021

59 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: KIT 1507 20 DECAL PLACEMENT - Revell · 2020. 8. 31. · decal 23 decal 23 42 mud flaps semi gloss black ★43 taillights chrome (paint lens tranparent red) 30 quarter fender semi

DECAL PLACEMENT20

Semi Gloss Black

Flat Tan

Gloss Blue

Yellow

Gloss Orange

Aluminum

Silver

Steel

Turn Signal Amber

Transparent Red

* REPEAT SEVERAL TIMES* A REPETER PLUSIEURS FOIS

* CEMENT TOGETHER* A COLLER

* ALTERNATIVE ASSEMBLY* ENSEMBLAGE ALTERNATIVE

* REMOVE AND THROW AWAY* A RETIRER ET JETER

* DO NOT CEMENT* NE PAS COLLER

* OPTIONAL PARTS* PIECES EN OPTION

* DECAL * DECAL COMANIE

This paint guide is provided to complete this kit as shown on the box.

Ce guide de peintures est fourni pour reproduire le modèle réduit qui apparaît sur la boîte.

Noir satiné

Havane mat

Bleu brilliant

Jaune

Orange brilliant

Aluminum

Argent

Acier

Ambre

Rouge Transparent

* Study the assembly drawings.* Each plastic part is identified by a number.* In the assembly drawings, some parts will be

marked by a star (★) to indicate chrome plated plastic.

* For better paint and decal adhesion, wash the plastic parts in a mild detergent solution. Rinse and let air dry.

* Check the fit of each piece before cementing in place.

* Use only cement for polystyrene plastic.* Scrape plating and paint from areas

to be cemented.* Allow paint to dry thoroughly before

handling parts.* Any unused parts may be discarded.

DECAL APPLICATION INSTRUCTIONS

1. Cut desired decal from sheet.2. Dip decal in water for a few seconds.3. Place wet decal on paper towel.4. Wait until decal is movable on paper backing.5. Place decal in position on model, face up and

slide backing away.6. Press out air bubbles with a soft damp cloth.7. Milkiness that may appear is for better decal

adhesion and will dry clear. Wipe away any excess adhesive.

8. Do not touch decal until fully dry.9. Allow the decals 48 hours to dry before

applying clear coat.

NOTE: Decals are compatible with setting solutions or solvents.

READ THIS BEFORE YOU BEGIN LIRE CE QUI SUIT AVANT DE COMMENCER

* Etudier les schémas de montage.* Chaque pièce en plastique est identifiée par un numéro.* Sur les schémas de montage, certaines pièces sont

marquées d'une étoile (★) pour indiquer qu'elles sont en plastique chromé.

* Pour une meilleure prise de la peinture et des autocollants, laver les pièces en plastique avec une solution détergente peu concentrée. Les rincer et les laisser sécher à l'air.

* Vérifier que chaque pièce s'ajuste bien avant de la coller en place.

* N'utiliser que de la colle pour polystyrène.* Gratter les parties à coller pour enlever le chrome et la peinture.* Laisser la peinture bien sécher avant de manipuler les pièces.* Toute pièce inutilisée peut être jetée.

DIRECTIVES D'APPLICATION DES AUTOCOLLANTS

1. Découper l'autocollant désiré de la feuille.2. Tremper l'autocollant dans de l'eau pendant quelques secondes.3. Placer l'autocollant mouillé sur une serviette en papier.4. Attendez que l'autocollant puisse être déplacé sur son

support en papier.5. Mettre l'autocollant en position sur le modèle face sur

le dessus et faire glisser le support pour l'enlever.6. Appuyer avec un chiffon doux humide pour éliminer les bulles d'air.7. La substance laiteuse qui peut apparaître est destinée à

améliorer l'adhésion de l'autocollant et devient incolore au séchage. Essuyer pour enlever tout excédent d'adhésif.

8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.9. Laisser l'autocollant sécher pendant 48 heures avant

d'appliquer une couche transparente.

REMARQUE: Les autocollants sont compatibles avec les solutions de fixage ou les solvants.

KENWORTH ® W900 KIT 1507 85150700200

If you have any questions or comments, call our hotline at: (800) 833-3570or, please write to:

Revell Inc Consumer Service Department, 1850 Howard Street Unit A, Elk Grove Village, Illinois 60007Be sure to include the plan number (85150700200), part number, description, your return address and phone number.

Visit our website: www.revell.com

Revell Inc Elk Grove Village, IL. Copyright © 2009. All rights reserved.

Kit 1507 - Page 12

The Kenworth W900 has every-thing that long-haul truckers need to get the job done. This impres-sive Kenworth design sports a duel sleeper capped with an aerodynamic roofline which tells everyone who sees it that it is truly a road machine without equal. Your Revell model features a hood that tilts forward to show a detailed tubocharged six cylinder diesel engine, chrome plated sim-ulated alloy wheels, duel exhaust stacks, roof mounted horns and mirrors with antennas. Decals with optional stripes or cus-tom graphics are also included.

Page 2: KIT 1507 20 DECAL PLACEMENT - Revell · 2020. 8. 31. · decal 23 decal 23 42 mud flaps semi gloss black ★43 taillights chrome (paint lens tranparent red) 30 quarter fender semi

REAR SUSPENSION ASSEMBLY1

FUEL TANK ASSEMBLY2

FRONT BUMPER ASSEMBLY18

FINAL ASSEMBLY19

Kit 1507 - Page 2 Kit 1507 - Page 11

72FRONT

AXLE BOTTOMSEMI GLOSS

BLACK

39FRAME

SEMI GLOSS BLACK

21BUMPER LIGHTS

CLEAR

44SUSPENSION

SEMI GLOSS BLACK

46REAR

AXLE BOTTOMSEMI GLOSS

BLACK

★31FUEL TANK HALF

CHROME

★25BUMPERCHROME

OR DECAL 30

★18AIR HORN

CHROME

★18AIR HORN

CHROME ★19CAB LIGHT

CHROME(PAINT SHADED AREA AMBER)

★60RIGHT

SIDE MIRRORCHROME

★20LEFT

SIDE MIRRORCHROME

★19CAB LIGHT

CHROME(PAINT SHADED AREA AMBER)

★19CAB LIGHTS

CHROME(PAINT SHADED AREAS AMBER)

TURN SIGNAL-AMBER FRONT

RED BACK

TURN SIGNAL-AMBER FRONT

RED BACK

★32FUEL TANK HALF

CHROME

41AIR TANKALUMINUM

41AIR TANKALUMINUM

★33FUEL TANK HALF

CHROME

★34FUEL TANK HALF

CHROME

58SUSPENSION

SUPPORTSEMI GLOSS BLACK

58SUSPENSION

SUPPORTSEMI GLOSS BLACK

PAINTRED

Page 3: KIT 1507 20 DECAL PLACEMENT - Revell · 2020. 8. 31. · decal 23 decal 23 42 mud flaps semi gloss black ★43 taillights chrome (paint lens tranparent red) 30 quarter fender semi

REAR ASSEMBLY16

GRILLE ASSEMBLY17

REAR WHEEL ASSEMBLY3

FRONT SUSPENSION ASSEMBLY4

Kit 1507 - Page 10 Kit 1507 - Page 3

★500UTER WHEEL

CHROME

52INNER WHEEL

SEMI GLOSS BLACK

45TIE ROD

SEMI GLOSS BLACK

38AXLE

SEMI GLOSS BLACK55

SHOCKSEMI GLOSS BLACK

55SHOCK

SEMI GLOSS BLACK

51SPACER

SEMI GLOSS BLACK

★24GRILLECHROME

★22HEADLIGHT

HOUSINGCHROME

★22HEADLIGHT

HOUSINGCHROME23

HEADLIGHT LENS CLEAR

23HEADLIGHT

LENS CLEAR

6HOOD

BODY COLOR

★35GRAB HANDLE

CHROME

★35GRAB HANDLE

CHROME

★40SKID PLATE

CHROME

DECAL23

DECAL23

42MUD FLAPS

SEMI GLOSS BLACK

★43TAILLIGHTS

CHROME(PAINT LENS

TRANPARENT RED)

30QUARTER FENDER

SEMI GLOSS BLACK

26PIVOT

SEMI GLOSS BLACK

27FIFTH

WHEELSEMI GLOSS

BLACK

CUT-A-WAY VIEW

Page 4: KIT 1507 20 DECAL PLACEMENT - Revell · 2020. 8. 31. · decal 23 decal 23 42 mud flaps semi gloss black ★43 taillights chrome (paint lens tranparent red) 30 quarter fender semi

DRAG LINK ASSEMBLY5

FRONT WHEEL ASSEMBLY6

CROSSOVER / EXHAUST ASSEMBLY7

STACK ASSEMBLY14

RADIATOR ASSEMBLY15

Kit 1507 - Page 4 Kit 1507 - Page 9

71CROSSOVER

PIPEALUMINUM

73EXHAUST

COLLECTORSTEEL

★480UTER WHEEL

CHROME

★530UTER STACK

CHROME

★54INNER STACK

CHROME

★69GRAB

HANDLECHROME

28RADIATOR

FRONTSEMI GLOSS BLACK

29RADIATOR REARSEMI GLOSS BLACK

★69GRAB

HANDLECHROME

49INNER WHEEL

SEMI GLOSS BLACK

57STEERING LINKSEMI GLOSS BLACK

Page 5: KIT 1507 20 DECAL PLACEMENT - Revell · 2020. 8. 31. · decal 23 decal 23 42 mud flaps semi gloss black ★43 taillights chrome (paint lens tranparent red) 30 quarter fender semi

AIR CLEANER ASSEMBLY12

BOX STEP ASSEMBLY13

ENGINE ASSEMBLY 8

Kit 1507 - Page 5Kit 1507 - Page 8

65PULLY

ASSEMBLYYELLOW PULLIES WITH SEMI GLOSS

BLACK BELTS

64TIMING COVER

YELLOW

12AIR CLEANER

HALFBODY COLOR

11AIR CLEANER

HALFBODY COLOR

13AIR CLEANER

HALFBODY COLOR

10AIR CLEANER

HALFBODY COLOR

15AIR CLEANER

BRACKETSBODY COLOR

67COMPRESSOR

ALUMINUM

66AFTER COOLER

YELLOW

63HEAD ASSEMBLY

YELLOW

70INJECTION

PUMPYELLOW

SEMI GLOSS BLACK

61LEFT

ENGINE HALFYELLOW

SILVER

SEMI GLOSSBLACK

74OIL FILTER

YELLOW

62RIGHT

ENGINE HALFYELLOW

ENGINE TO FRAME

RIGHT SIDE OF ENGINE

RIGHT

RIGHT

FIRST

LEFT

LEFT

★36BATTERY BOX

STEPCHROME

★14AIR CLEANER

CAPSCHROME

SECOND

Page 6: KIT 1507 20 DECAL PLACEMENT - Revell · 2020. 8. 31. · decal 23 decal 23 42 mud flaps semi gloss black ★43 taillights chrome (paint lens tranparent red) 30 quarter fender semi

DRIVESHAFT ASSEMBLY9

INTERIOR ASSEMBLY10

CAB / INTERIOR ASSEMBLY11

Kit 1507 - Page 6 Kit 1507 - Page 7

47DRIVESHAFT

SEMI GLOSS BLACK

3SEATS

TAN

7GEAR SHIFT

SEMI GLOSS BLACK

5STEERING COLUMN

SEMI GLOSS BLACK

6STEERING

WHEELSEMI GLOSS

BLACK

4DASHBOARD

TAN DIALS, BLACK WITH

SILVER RIMS AND DETAILS

2INTERIOR

TAN

8WINDSHIELD

CLEAR

1CAB

BODY COLOR

59SLEEPER WINDOW

CLEAR

68AIR DUCTALUMINUM

SEMI GLOSS-BLACK

SEMI GLOSS BLACK

INTERIOR INTO CAB

BOTH SIDES

CAB TO FRAME

CUT-A WAYSHOWING

REAR SLOT

Page 7: KIT 1507 20 DECAL PLACEMENT - Revell · 2020. 8. 31. · decal 23 decal 23 42 mud flaps semi gloss black ★43 taillights chrome (paint lens tranparent red) 30 quarter fender semi

DRIVESHAFT ASSEMBLY9

INTERIOR ASSEMBLY10

CAB / INTERIOR ASSEMBLY11

Kit 1507 - Page 6 Kit 1507 - Page 7

47DRIVESHAFT

SEMI GLOSS BLACK

3SEATS

TAN

7GEAR SHIFT

SEMI GLOSS BLACK

5STEERING COLUMN

SEMI GLOSS BLACK

6STEERING

WHEELSEMI GLOSS

BLACK

4DASHBOARD

TAN DIALS, BLACK WITH

SILVER RIMS AND DETAILS

2INTERIOR

TAN

8WINDSHIELD

CLEAR

1CAB

BODY COLOR

59SLEEPER WINDOW

CLEAR

68AIR DUCTALUMINUM

SEMI GLOSS-BLACK

SEMI GLOSS BLACK

INTERIOR INTO CAB

BOTH SIDES

CAB TO FRAME

CUT-A WAYSHOWING

REAR SLOT

Page 8: KIT 1507 20 DECAL PLACEMENT - Revell · 2020. 8. 31. · decal 23 decal 23 42 mud flaps semi gloss black ★43 taillights chrome (paint lens tranparent red) 30 quarter fender semi

AIR CLEANER ASSEMBLY12

BOX STEP ASSEMBLY13

ENGINE ASSEMBLY 8

Kit 1507 - Page 5Kit 1507 - Page 8

65PULLY

ASSEMBLYYELLOW PULLIES WITH SEMI GLOSS

BLACK BELTS

64TIMING COVER

YELLOW

12AIR CLEANER

HALFBODY COLOR

11AIR CLEANER

HALFBODY COLOR

13AIR CLEANER

HALFBODY COLOR

10AIR CLEANER

HALFBODY COLOR

15AIR CLEANER

BRACKETSBODY COLOR

67COMPRESSOR

ALUMINUM

66AFTER COOLER

YELLOW

63HEAD ASSEMBLY

YELLOW

70INJECTION

PUMPYELLOW

SEMI GLOSS BLACK

61LEFT

ENGINE HALFYELLOW

SILVER

SEMI GLOSSBLACK

74OIL FILTER

YELLOW

62RIGHT

ENGINE HALFYELLOW

ENGINE TO FRAME

RIGHT SIDE OF ENGINE

RIGHT

RIGHT

FIRST

LEFT

LEFT

★36BATTERY BOX

STEPCHROME

★14AIR CLEANER

CAPSCHROME

SECOND

Page 9: KIT 1507 20 DECAL PLACEMENT - Revell · 2020. 8. 31. · decal 23 decal 23 42 mud flaps semi gloss black ★43 taillights chrome (paint lens tranparent red) 30 quarter fender semi

DRAG LINK ASSEMBLY5

FRONT WHEEL ASSEMBLY6

CROSSOVER / EXHAUST ASSEMBLY7

STACK ASSEMBLY14

RADIATOR ASSEMBLY15

Kit 1507 - Page 4 Kit 1507 - Page 9

71CROSSOVER

PIPEALUMINUM

73EXHAUST

COLLECTORSTEEL

★480UTER WHEEL

CHROME

★530UTER STACK

CHROME

★54INNER STACK

CHROME

★69GRAB

HANDLECHROME

28RADIATOR

FRONTSEMI GLOSS BLACK

29RADIATOR REARSEMI GLOSS BLACK

★69GRAB

HANDLECHROME

49INNER WHEEL

SEMI GLOSS BLACK

57STEERING LINKSEMI GLOSS BLACK

Page 10: KIT 1507 20 DECAL PLACEMENT - Revell · 2020. 8. 31. · decal 23 decal 23 42 mud flaps semi gloss black ★43 taillights chrome (paint lens tranparent red) 30 quarter fender semi

REAR ASSEMBLY16

GRILLE ASSEMBLY17

REAR WHEEL ASSEMBLY3

FRONT SUSPENSION ASSEMBLY4

Kit 1507 - Page 10 Kit 1507 - Page 3

★500UTER WHEEL

CHROME

52INNER WHEEL

SEMI GLOSS BLACK

45TIE ROD

SEMI GLOSS BLACK

38AXLE

SEMI GLOSS BLACK55

SHOCKSEMI GLOSS BLACK

55SHOCK

SEMI GLOSS BLACK

51SPACER

SEMI GLOSS BLACK

★24GRILLECHROME

★22HEADLIGHT

HOUSINGCHROME

★22HEADLIGHT

HOUSINGCHROME23

HEADLIGHT LENS CLEAR

23HEADLIGHT

LENS CLEAR

6HOOD

BODY COLOR

★35GRAB HANDLE

CHROME

★35GRAB HANDLE

CHROME

★40SKID PLATE

CHROME

DECAL23

DECAL23

42MUD FLAPS

SEMI GLOSS BLACK

★43TAILLIGHTS

CHROME(PAINT LENS

TRANPARENT RED)

30QUARTER FENDER

SEMI GLOSS BLACK

26PIVOT

SEMI GLOSS BLACK

27FIFTH

WHEELSEMI GLOSS

BLACK

CUT-A-WAY VIEW

Page 11: KIT 1507 20 DECAL PLACEMENT - Revell · 2020. 8. 31. · decal 23 decal 23 42 mud flaps semi gloss black ★43 taillights chrome (paint lens tranparent red) 30 quarter fender semi

REAR SUSPENSION ASSEMBLY1

FUEL TANK ASSEMBLY2

FRONT BUMPER ASSEMBLY18

FINAL ASSEMBLY19

Kit 1507 - Page 2 Kit 1507 - Page 11

72FRONT

AXLE BOTTOMSEMI GLOSS

BLACK

39FRAME

SEMI GLOSS BLACK

21BUMPER LIGHTS

CLEAR

44SUSPENSION

SEMI GLOSS BLACK

46REAR

AXLE BOTTOMSEMI GLOSS

BLACK

★31FUEL TANK HALF

CHROME

★25BUMPERCHROME

OR DECAL 30

★18AIR HORN

CHROME

★18AIR HORN

CHROME ★19CAB LIGHT

CHROME(PAINT SHADED AREA AMBER)

★60RIGHT

SIDE MIRRORCHROME

★20LEFT

SIDE MIRRORCHROME

★19CAB LIGHT

CHROME(PAINT SHADED AREA AMBER)

★19CAB LIGHTS

CHROME(PAINT SHADED AREAS AMBER)

TURN SIGNAL-AMBER FRONT

RED BACK

TURN SIGNAL-AMBER FRONT

RED BACK

★32FUEL TANK HALF

CHROME

41AIR TANKALUMINUM

41AIR TANKALUMINUM

★33FUEL TANK HALF

CHROME

★34FUEL TANK HALF

CHROME

58SUSPENSION

SUPPORTSEMI GLOSS BLACK

58SUSPENSION

SUPPORTSEMI GLOSS BLACK

PAINTRED

Page 12: KIT 1507 20 DECAL PLACEMENT - Revell · 2020. 8. 31. · decal 23 decal 23 42 mud flaps semi gloss black ★43 taillights chrome (paint lens tranparent red) 30 quarter fender semi

DECAL PLACEMENT20

Semi Gloss Black

Flat Tan

Gloss Blue

Yellow

Gloss Orange

Aluminum

Silver

Steel

Turn Signal Amber

Transparent Red

* REPEAT SEVERAL TIMES* A REPETER PLUSIEURS FOIS

* CEMENT TOGETHER* A COLLER

* ALTERNATIVE ASSEMBLY* ENSEMBLAGE ALTERNATIVE

* REMOVE AND THROW AWAY* A RETIRER ET JETER

* DO NOT CEMENT* NE PAS COLLER

* OPTIONAL PARTS* PIECES EN OPTION

* DECAL * DECAL COMANIE

This paint guide is provided to complete this kit as shown on the box.

Ce guide de peintures est fourni pour reproduire le modèle réduit qui apparaît sur la boîte.

Noir satiné

Havane mat

Bleu brilliant

Jaune

Orange brilliant

Aluminum

Argent

Acier

Ambre

Rouge Transparent

* Study the assembly drawings.* Each plastic part is identified by a number.* In the assembly drawings, some parts will be

marked by a star (★) to indicate chrome plated plastic.

* For better paint and decal adhesion, wash the plastic parts in a mild detergent solution. Rinse and let air dry.

* Check the fit of each piece before cementing in place.

* Use only cement for polystyrene plastic.* Scrape plating and paint from areas

to be cemented.* Allow paint to dry thoroughly before

handling parts.* Any unused parts may be discarded.

DECAL APPLICATION INSTRUCTIONS

1. Cut desired decal from sheet.2. Dip decal in water for a few seconds.3. Place wet decal on paper towel.4. Wait until decal is movable on paper backing.5. Place decal in position on model, face up and

slide backing away.6. Press out air bubbles with a soft damp cloth.7. Milkiness that may appear is for better decal

adhesion and will dry clear. Wipe away any excess adhesive.

8. Do not touch decal until fully dry.9. Allow the decals 48 hours to dry before

applying clear coat.

NOTE: Decals are compatible with setting solutions or solvents.

READ THIS BEFORE YOU BEGIN LIRE CE QUI SUIT AVANT DE COMMENCER

* Etudier les schémas de montage.* Chaque pièce en plastique est identifiée par un numéro.* Sur les schémas de montage, certaines pièces sont

marquées d'une étoile (★) pour indiquer qu'elles sont en plastique chromé.

* Pour une meilleure prise de la peinture et des autocollants, laver les pièces en plastique avec une solution détergente peu concentrée. Les rincer et les laisser sécher à l'air.

* Vérifier que chaque pièce s'ajuste bien avant de la coller en place.

* N'utiliser que de la colle pour polystyrène.* Gratter les parties à coller pour enlever le chrome et la peinture.* Laisser la peinture bien sécher avant de manipuler les pièces.* Toute pièce inutilisée peut être jetée.

DIRECTIVES D'APPLICATION DES AUTOCOLLANTS

1. Découper l'autocollant désiré de la feuille.2. Tremper l'autocollant dans de l'eau pendant quelques secondes.3. Placer l'autocollant mouillé sur une serviette en papier.4. Attendez que l'autocollant puisse être déplacé sur son

support en papier.5. Mettre l'autocollant en position sur le modèle face sur

le dessus et faire glisser le support pour l'enlever.6. Appuyer avec un chiffon doux humide pour éliminer les bulles d'air.7. La substance laiteuse qui peut apparaître est destinée à

améliorer l'adhésion de l'autocollant et devient incolore au séchage. Essuyer pour enlever tout excédent d'adhésif.

8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.9. Laisser l'autocollant sécher pendant 48 heures avant

d'appliquer une couche transparente.

REMARQUE: Les autocollants sont compatibles avec les solutions de fixage ou les solvants.

KENWORTH ® W900 KIT 1507 85150700200

If you have any questions or comments, call our hotline at: (800) 833-3570or, please write to:

Revell Inc Consumer Service Department, 1850 Howard Street Unit A, Elk Grove Village, Illinois 60007Be sure to include the plan number (85150700200), part number, description, your return address and phone number.

Visit our website: www.revell.com

Revell Inc Elk Grove Village, IL. Copyright © 2009. All rights reserved.

Kit 1507 - Page 12

The Kenworth W900 has every-thing that long-haul truckers need to get the job done. This impres-sive Kenworth design sports a duel sleeper capped with an aerodynamic roofline which tells everyone who sees it that it is truly a road machine without equal. Your Revell model features a hood that tilts forward to show a detailed tubocharged six cylinder diesel engine, chrome plated sim-ulated alloy wheels, duel exhaust stacks, roof mounted horns and mirrors with antennas. Decals with optional stripes or cus-tom graphics are also included.