Introducing  Knit  Blockers™  by  Knitter's Pride!Knit  Blockers™  are  an  innovative  solution  that  allow  users  to  more

easily  and  more  quickly  block  their  projects.

It  subtantially  reduces  the  number  of  pins  that  a  user  needs  to  use  to

block  a  project.  Plus  it  allows  the  user  to  apply  a  more  consistent

tension  while  blocking  a  wide  area.  It  saves  time  and  provides  a

better,  more  consistent  solution  than  using  pins  alone.  

Knit  Blockers™  also  have  the  ability  to  serve  as  an  anchor  for

attaching  string  to  run  within  the  stitch  ends  along  the  perimeter  of

the  project.  You  may  also  use  Knit  Blockers  with  blocking  wires.

These  neat  Knit  Blockers  do  so  many  different  tasks  and  we  are  sure

that  knitters  will  discover  many  more  methods  for  using  them.

We  have  added  holes  on  both  ends  of  each  Knit  Blocker  which  can

serve  as  an  anchor  point  when  the  user  attaches  string  to  these

holes.  Strings  of  various  lengths  can  be  used

A  Knit  Blockers™ set  consists  of  20  units  in  a  nice  plastic  storagecase:twelve  8  pin  Blockers  and  eight  4  pin  blockers.  Some  projects  may

require  more  Blockers  but  the  user  can  use  string  to  extend  the

length  or  use  individual  pins  in  conjunction  with  the  Knit  Blockers™.Of course,  a  knitter  can  buy  a  second  set  of  blockers  as  well.

Knitter's Pride and  Nancy's  Knit  Knacks  have carefully  engineered  thisproduct  to  provide  a  neat  NEW  solution  for  all  knitters  when  blocking.

_______________________________________

Knit  Blockers

Product Configuration:Large  Blockers  -­  12  per  set,  8  pins  (stainless steel)  Approx.  3"  longSmall  Blockers  -­  8  per  set,  4  pins  (stainless  steel)  Approx.  1.5"  long

Height:  total  height  is  1.75"  of  which  the  exposed  pin  length  is  3/4"

Knit  Blockers™ - This will  change  the  way  that  Knitters will blockthere projects  now  and  forever!

Knit  Blockers™  were developed by Nancy's Knit Knacks (NKK) of USA,a business outfit renowned for it's creative products, based on a design and recommendation of a very creative knitter. NKK thensought a partner who could produce these products at a low cost anddistribute them Worldwide. Knitter's Pride was the partner thatNKK felt provided the best solution. So  the  evolution  of  this  great  new  product  started  by  a  knitter  who

had  taken  the  time  to  make  prototypes  and  who  knew  deep  in  her

heart  that  this  product  was  one  which  knitters  Worldwide  would  enjoy

using.  When  we  first  heard  of  it  and  had  a  chance  to  test  the

prototypes,  we  agreed.  This  product  was  a  winner!

Knit  Blockers  ™  come  packaged  in  a  neat  plastic  box

The  box  contains  12  large  8  pin  units  and  8  small  4  pin  units.

The  box  has  separator  ridges  to  keep  the  Knit  Blockers™  in  place. The  bottom  of  the  box  is  lined  with  foam  rubber  to  protect  the  pins.

Knitters may  like  the  Knit Blockers™ so  much that they  could want  2  sets,especially  for  larger  projects.