know about mbot gridii printing mbot gridii+ introduces a print cooling system based on...
TRANSCRIPT
Know About MBot GridII Printing
MBot GridII+ introduces a print cooling system based on aeromechanics, so that PLA is cooled immediately when extruding from the nozzle. Dual-head GridII+ is the only 3D printer available on market that is equipped with two dual-fan extruders, to provide the best print performance.
MBot Grid + can automatically measure the distances between the nozzle Ⅱand all the three ends of build platform, then adjust the height or tilt angle during building, so that rafts won’t be hard to remove and the extruder won’t clog.
Build plate is fastened with magnets, which makes your prints easier to remove, and helps protect the mechanical structure of the printer. In addition, the build plate of GridII + is made of borosilicate glass, to enhance flatness, security and heat resistance.
Competent to build high-resolution models. An additional cooling fan is installed to improve extrusion stability. With a more efficient cooling system, motor keeps cool even after long-time working.
• Quality Desktop 3d Printer
• 3d Printer
• 3d Printer Filament
• Cube 3d Printer
• Simple open design. Pick the body color that suits you.• Clean and waste-free building process.
• Compact and portable – you can move it to the power supply without difficulty. You can print from SD card, instead of PC.
Contact Us Now
Magicfirm Office & Factory in China
Address： 14th Floor,Block A,Huaye Building,511 Jianye Road,Binjiang
District | Hangzhou, ZJ | 310052 | CHINA
Email： [email protected]
Tel： +86-571-88021266-(ext805) UTC+8 9:30-18:00 work time
Fax： +86-571-88283927
Skype：mbot3dsupport mbot3dstore
Web : http://www.Mbot3d.com