Water and Hydrocarbon proof: Like the 21247, the 21243 has a breathable water proof bladder to provide comfort while protecting against water.

KNUCKLEHEAD X10KNUCKLEHEAD X10THE SUPERIOR GLOVE OF THE OIL AND GAS INDUSTRY

PVC anti slip patches on the finger tips and thumb

PVC anti slip double wishbone palm patch with double breakpoints preventing bunching up. Lined with neoprene padding for impact absorption. Triple sewn.

PVC anti slip tool grip holder at index finger side with neoprene padding for impact absorption

Find ge ev rr DuC e- se igr nP

High absorbency terry cloth brow wipe

Elastic wrist

The X10 features a pre-curved finger designed to follow the natural contours of the hand, lessening hand fatigue, increasinghand control and overall, preventingcommon hand strain injuries.

Fully sewn with high tenacity thread to help prevent blowouts

Contrasting high visibility materials

Full finger & backhand shockabsorbing thermoplastic rubberprotection to prevent pinchingand back hand injuries

2-Ply Pre-Curved

ARMORSKINtougher

thanleather

You Asked For ItGrip: Double Wishbone PVC Palm All styles feature a double wishbone PVC palm that is triple sewn, increasing the grip strength. The Majestic Knucklehead X10 has been tested and has a 21% increase in static coefficient of friction and 35% increase of kinetic COF over the Kong. Compared to the Roughneck the X10 is 53% and 50% respectively better in grip power

NO Velcro: Elastic Wrist To decrease the chances of a snag or pulling of the wirst closure the velcro closure has been replaced with a elastic wrist. Cut Resistance: Kevlar provides some of the best cut protection and is inherently fire resistant, a Kevlar lining gives the 21245 a CE Cut Rating of 4. Winterlined: The 21247 is lined with Thinsulate to provide a barrier from water, wind, and cold weather

WATER PROOF

WATER PROOF

Item Liner Sizes21242 Unlined S - XXL21243 Waterproof Lining S - XXL21245 Kevlar Lining S - XXL21247 Thinsulate Lining S - XXL

Item: Grip: Waterproof Cut Resistant Winter Lined21242212432124521247

THE SUPERIOR GLOVE OF THE OIL AND GAS INDUSTRY

*All styles come in yellow (HY)or orange (HO)

Get a Grip at ½ the CostRequested and Developed for the “North Slope”

4 Different linings; 2 Colors for 8 Variations for any Need

COF

0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1

Static Kinetic

Rati

o X10

Kong

Ringer

Coefficient of FrictionThese gloves represent some of the finest technology available today. Majestic is on the cutting edge of glovetechnology and is embracing “COF”, coefficiency of friction. Technically friction is the force resisting the relativemotion of solid surfaces, fluid layers and/or material elements sliding against each other. In simple terms, it is theopposite of “slippery”. If you think about a hammer with a slippery surface, normally you would apply a death gripon it. If you wore a glove that has high anti slip properties or high COF, you would then use less strength to performthe task, and by using less strength, you are now limiting stress and fatigue on your body.Key Terms:Static Friction - The force needed to move an objectKinetic Friction - The force needed to keep the object in motion

The US Dept. of Labor and OSHA estimates that there are over 1 million hand injuries in the work place eachyear, number two to back injuries and $20 billion a year in workers compensation. Hand, wrist and finger injuriesaccounted for nearly 27% of the total injuries in 2006 according to Bureau of Labor.The Department of Labor carpal tunnel syndrome is increasing at an “epidemic” rate, and injuries involving repetitive motion injuries has increased 100% over the last few years and can be directly attributed to hand strain. Majestic’s Knucklehead X10 is ergonomically designed with a pre-curved design to reduce hand strain, and the double wishbone design greatly increases grip strength to reduce the chances of hand fatigue and hand strainin the work place, saving time and money on injuries.

Safer and Superior to the Kong and Roughneck

Majestic Knucklehead X10 Ironclad Kong

Ringer Roughneck

EN 388 StandardsMajestic X10 Unlined Majestic X10 w/ Kevlar Ironclad Kong Ringer Roughneck

Abbrasion 3 3 4 4Cut Resistance 2 4 1 2Tear Resistnance 3 3 3 3Puncture Resistance 2 3 2 2

Knucklehead X10 features:ARMOR SKIN synthetic leather palm

PVC anti-slip patches & double

wish bone palm with neoprene

padding for impact adsorption.

Full finger & backhand shock absorbing

thermoplastic rubber protection

Contrasting high visibility materials

Pre-curved finger design

Fully sewn with high tenacity thread

Elastic wrist

High absorbency terry cloth brow wipe

Available in sizes S-XXL, 6DZ / Case

KNUCKLEHEAD X10KNUCKLEHEAD X10THE SUPERIOR GLOVE OF THE OIL AND GAS INDUSTRY THE SUPERIOR GLOVE OF THE OIL AND GAS INDUSTRY

COFStatic % Difference Kinetic % Difference

X10 0.95 - 0.822 -Kong 0.788 21 0.537 35Ringer 0.62 53 0.554 50