KNX IP: Breakthrough to more performance

2 3

2 3

List of contents:

Cross-discipline automation with KNX IP 4Overview of modern building automation

Flexible and open for every application 6The WAGO-I/O-SYSTEMLighting, shading, heating/ventilation and much more

One software tool for all disciplines 8Universal base modules for many options

The WAGO KNX/EIB concept: 10Simple, versatile and fastAn overview

Universal modules for intelligent functions 12in a single deviceKNX/EIB components in detail

Solutions for every application 14Examples of applications and uses

Connect, switch on and simply get starting 16For beginners

Seminars and training 17Training courses focusing on building automation

WAGO online 17Training courses focusing on building automation

Benefits that speack for themselves 18Advantages for designers, electrical installers, system integrators and users

Heating, air-conditioning and ventilation control centers Automatic control of heating and ventila-tion equipment increases comfort and improves the climate within a building with maximum economy and minimum energy costs. Central monitoring and remote access included.

For comforting warmth: A precision individual room controller creates the right room temperature, adapts itself automatically to the user‘s wishes and recognizes the heat require-ment during the day.

Cross-discipline automation with KNX IP

Added value by optimizing the operating costs The requirements of building for comfort, safety, fl exibility and an effi cient use of energy are continuously increasing. In the future, it will be possible to easily and quickly adapt a building to suit the requirements and off er fl exible conversions. With KNX IP, modern building automation extends a communications network throughout the whole building, and create individual sections. This will increase the value of the property and optimize the operating costs. It will also provide a fault management and security functions.

4 5

For glare-free working: An automatic blind controller creates glare-free lighting and well-regulated shade — depending on the room usage. It provides a pleasant room climate by optimizing the heat introduced and the amount of shade.

For a comfortable working atmosphere: Whether offi ce, reception, laboratory or conference room: the individual use determines the required brightness and lighting atmosphere. The lighting control-ler automatically adjusts the lighting conditions and can be incorporated into comprehensive energy-saving concepts.

For a good room climate: Optimum control provides a good room climate and increases the effi ciency of the people using the room.

Cross-discipline automation with KNX IP

4 5

LonWorks®

BACnet

KNX IP

LonWorks

BACnet

6 7

Flexible and open for every application The WAGO-I/O-SYSTEM

The WAGO-I/O-SYSTEM 750 makes it possible: complete in-the-fi eld wiring of the I/O modules, without defi nition of the fi nal fi eldbus. The modularity of the system enables almost any combination of digital/analog inputs and outputs and complex sub-bus modules to be assembled on a fi eldbus node. As well as communications tasks on the network, the controllers also take care of stand-alone open and closed loop control

tasks with regard to lighting, shading, heating, ventilation, air conditioning and other applications. Both as part of a higher-level control system, e.g. multiple axes, and directly at room level. This guarantees high availability of the sub-applications, simple structures and fast response times while maintaining the fullest fl exibility.

6 7

Flexible and open for every application The WAGO-I/O-SYSTEM

DALI Master The DALI Master module is used for controlling up to 64 electronic ballasts in accordance with the DALI standard. This enables complex lighting applica-tions to be easily parameterized and controlled with status of every individu-al lamp reported.

EnOcean Radio Receiver The wireless EnOcean switches and sensors can be conveniently installed on glass walls, for example, and moved to a diff erent position without cabling. Thanks to this innovative no-battery technology, the components are abso-lutely maintenance-free over the life of their service.

Digital inputs 2-/4-/8-channel 5/24/48VDC 24/120/230VAC 0.2/3/50ms

Analog outputs 2-/4-channel 0-10/±10VDC 0-20/4-20mA

Specialty mo-dules Supply modules AC/DC 0-230V Counters and other functions

Analog inputs 2-/4-channel 0-10/±10VDC 0-20/4-20 mA PT100, PT1000 Ni1000

Digital outputs 2-/4-/8-channel 5/24VDC 125/230/250VAC 0.02/0.3/0.5/1/2 /.../16A/Relay module

One software tool for all disciplines

8 9

HVAC

Individual room control

Communication

8 9

The WAGO I/O-PRO CAA software serves as a basic programming tool for the user/installer. Custom programs may be written in IEC 61131-3 programming languages (FBD, LD, IL, ST, CFC and FC). Regardless of whether HVAC (e.g., ventilation system controllers) or lighting and blind control applications, almost any kind of application is possible. Ready-made libraries make program-ming easier.

Solutions are available for the following complex applications: control of DALI

lights or control valves with BELIMO MP-Bus, remote meter reading via M-Bus or communication with KNX/EIB bus participants.

Through modular WAGO hardware and fl exible programming, the KNX/EIB user may off er solutions to his customers that were previously only possible with a lot of resources in terms of hardware and costs. Grafi cally designed programs, e.g. using the FBD (Function Block Diagram) programming language are very easy

to create and are easily comprehensible even to service technicians.

The WAGO I/O-PRO CAA software, in combination with the WEB server in the KNX IP controller, also off ers very easy to create/handle user interfaces in WEB browser on any type of PC. This often makes an expensive visualization software unnecessary.

This also makes remote access with appropriate rights via INTRANET and

INTERNET possible.

A large number of switching channels for a wide variety of applications may be defi ned using the controller‘s built-in clock as well as ready-made program modules.

ETS 3

The WAGO KNX/EIB concept: Simple, versatile and fast

In recent years, global communications options „without“ speed limits have af-forded great success to ETHERNET as a medium for automation, as ETHER-NET off ers several advantages: high speed between devices, incorporation into an already existing infrastructure, seamless access from any location, web technology. Further advantages of KNX IP as a transmission protocol on ETHERNET as a medium include the fact that KNX/EIB knowledge already acquired can be applied, and the fa-miliar and proven ETS 3 software can be used for commissioning..

With the KNX IP controller and the KNX/EIB/TP1 module, WAGO pro-vides an innovative concept for build-ing automation. Complex applications, which were unthinkable up to now, can be created with these components. The KNX/EIB/TP1 module provides the connection to existing TP1 networks; conventional sensors and actuators as well as complex connections to DALI, EnOcean, etc. can be brought together cost-eff ectively on the KNX IP control-ler.

10 11

KNX/EIB/TP1 network

ETHERNET (KNX IP)

Router

The WAGO KNX/EIB concept: Simple, versatile and fast

NETWORK

10 11

Sub-bus systems

Standard devices

Push button

Lighting fi xtures

KNX TP1 module

Interface modules

In-puts

Out-puts

The 753-646 KNX/EIB/TP1 Module provides two separate functions, which set themselves up automatically depend-ing on the application. It can be used as a KNX/EIB interface to freely program-mable controllers of the WAGO-I/O-SYSTEM 750 or as TP1 interface for KNXnet/IP routing.

Universal modules for intelligent functions in a single device

The intelligent application con-troller for rooms and zones The free programmability makes the WAGO 750-849 KNX IP Controller into a powerful room and zone control-ler. This makes it possible to solve any open and closed loop control task - whether logical operations for window monitoring, computations for forming average and limiting values or exten-sive heating and ventilation controllers. KNXnet/IP routing is made possible by combining the KNX IP controller with a KNX/EIB/TP1 module.

12 13

Controller with logic

Module as TP1 interface

ETS 3 WAGO plug-in

Controller and router: Two devices in ONE A routing is made possible by combin-ing the KNX IP controller and the KNX/EIB/TP1 module, which allows classi-cal TP1 networks to be connected to ETHERNET.

With only two components, the WAGO-I/O-SYSTEM 750 becomes a multifunctional KNX/EIB device. It provides functionalities for which sev-eral diff erent EIB devices are currently required.

Easy commissioning Confi guration of the WAGO KNX IP controller is done using the standard programming tool, ETS 3. A plug-in specially developed by WAGO supports the user with assignment of group addresses and downloading of applications.

Universal modules for intelligent functions in a single device

12 13

WAGO-I/O-PRO CAA

Controller/Router

ETS 3

ETS 3

Examples for every application

In this application example, the WAGO KNX IP controller with the KNX/EIB/TP1 module is used as a router on an IP backbone (ETHER-NET). No IEC application is required for the router functionality. The ETS 3 is connected on the ETHERNET side and has access to all devices, which are connected via the KNX/EIB/TP1 modules in the TP1 networks shown. A device in the TP1 network on the left can communicate with a device in a TP1 network on the right via the IP backbone.

The KNX IP controller can also be used as a pure application controller with standard digital/analog input and output modules and with spe-cialty modules. The communication between the controllers is performed via an ETHERNET network.

KNX IP controller with I/O modules

KNXnet/IP routing

14 15

IP backbone ETS

Device

Device

Device

Device

TP TP

Router

IP controller

750-600KNX-TP1 module

750-849

1.1.0

1.1.1

1.1.2

1.2.0

1.2.1

1.2.2

Router

IP controller

750-600KNX-TP1 module

750-849

IP backbone

Push button Lighting

Router

IP controller

Router

750-849 2.0.1 2.0.2 750-xxx 750-xxx 750-600 750-xxx 750-xxx 750-600

DI DO Logic Logic

ETS 3

ETS 3

This application shows the processing of data from two devices in the same TP1 network and the integration of fur-ther modules of the WAGO 750/753 Series. Switches, for example, can be connected to these modules. Data from the switches and data from the devices on the TP1 network can be processed together in the IEC application.

KNX IP controller with I/O modules and router

In this application example, the KNX/EIB/TP1 module is used not on a KNX IP controller, but on a diff erent control-ler from the WAGO 750 Series. In this case, the KNX/EIB/TP1 module acts as a gateway. The ETS 3 is inserted in the TP1 line.

Fieldbus controller with KNX/EIB/TP1 module as gateway

14 15

NOTE: This is only a selection of possible application examples. Please fi nd further examples and information at www.wago.com.

Connection to fi eldbus LON, BACnet, Profi net, Devicenet, etc.

ETS

Device

Device

TP

Logic

Gateway

750-xxx 750-xxx 750-600KNX-TP1 module

IP backbone ETS

Device

Device

Push button TP

Logic

Router

IP Controller

750-849 750-xxx 750-xxx 750-xxx 750-600

DI

1.1.0

2.0.1

1.1.1

1.1.2

From the simple lighting controller to the complex and extensive heating and ventilation control system, WAGO provides the user with a selection of comprehensive libraries with pre-pro-grammed function blocks, which have been specially matched to the require-ments of building automation.

Beginners can call upon completed applications with a recommendation for the appropriate hardware confi guration for the controller. The web pages for the control and for displaying status mes-sages are already included here. All applilcations can be used either directly for existing projects or as a template for carrying out project-specifi c modifi ca-tions retrospectively. This makes it easier for KNX/EIB experts who do not have PLC experience to use the components.

Examples of completed applica-tions:

Single room automation (lighting, •shade, heating/cooling)

Multiaxial room automation •

DALI lighting control with conventional •switches (or EnOcean radio buttons)

Multiple blind actuator •

Multiple switch actuator •

and others •

Connect, switch on and simply get starting

16 17

Switch actuator confi guration

Switching channel

Switch

Stairwell light

OFF-delay

ON-delay

ON-/OFF-delay

Central ON/OFF disabled

None retrigger

Time Off -delay

Time On-delay

Reset-mode RETAIN Reset-mode ON Reset-mode OFF

Prewarning disabled

T#0ms

T#0ms

Default values Write Home

OFF

www.wago.com16 17

Seminars and training

WAGO online

Yesterday‘s information will not get anyone anywhere. You can therefore access our latest data at any time with the WAGO building technology portal at www.wago.com. Here you will fi nd everything you want to know about building automation – with the most up-to-date product information, links to take you further, particulars of the next seminar dates, and much more. It

The maximum benefi ts of our products are yours by gaining maximum user knowledge. For this reason, WAGO conveys this knowledge to you in ef-fective and user-oriented seminars and training. This will save you time and will help use our products to their fullest capacity.

For example, in seminars focusing on building automation you learn how to work

The very latest at the click of a mouse

is worth a virtual visit. Regularly. Come and see for yourself.

And ask us if you can‘t fi nd an answer on our web site. We look forward to hearing from you.

in the WAGO programming environment and the use of KNX IP components for creating custom building automation solutions.

You can fi nd information on dates and topics for upcoming seminars and training at www.wago.com under: Service/Semi-nars and Training.

It is no coincidence that components and composition have the same roots. Components are more than individual parts but are perfectly matched ele-ments of a complete composition.

Even the innovative WAGO KNX/EIB components are seamlessly integrated in the WAGO-I/O-SYSTEM. This provides a large choice of input and output modules, specialty modules to sub-bus systems such as DALI, and

Benefits that speack for themselves

18 19

controllers for higher level networks such as ETHERNET.

Once selected, configurations are not fixed. Changes and expansions are possible at any time, at the planning stage, during the building phase and even several years later.

The WAGO-I/O-SYSTEM can be used for pre-programmed functions, and also as an open programmable control system according to IEC 61131-3. Pre-

designed or easy-to-create Web pages can be used as an operator interface on the controllers. The control units replace several individual KNX/IEB components cost-effectively as room and zone controllers.

The WAGO-I/O-SYSTEM has been used in building technology for many years and is thus accepted by many designers, electrical installers, system integrators and users — an important sales argument in the competition for your valuable orders.

Benefits that speack for themselves DesignerExisting systems can be expanded using new, previously •unavailable functionsAll subsections can be planned using one manufacturer•All applications can be implemented with one device•The whole system provides flexibility for customer wishes•Positive energy balance by bringing together several func-•tions; long system lifeSame components used for industrial and building ap-•plicationsCompliance with the norms/certificates well beyond the •building technology standard

InstallerWAGO-ETS 3 plug-in offers the familiar user •interface

New applications (from simple logic functions to •complex control tasks)

Standard applications can be created easily by •using pre-programmed applications or by the free programming; project-specific adaptations are also possible

The wire connection technology supplies the •utmost safety during installation

System integratorNew applications possible; e.g., HVAC applications•WAGO-ETS 3 plug-in provides the familiar user •interfaceOne hardware system for different technologies•Economic due to universal use across many subsec-•tionsA great number of data points in one controller•Function blocks for BA, HVAC and others (E-Mail, •SMS, etc.) are availableUser interfaces can be implemented via web server•

UserExisting installations can be expanded by new •functions in the futureLong system lifecycle, subsequent deliveries are •guaranteed Web-based, cost-effective service and mainte-•nance interfaces are automatically integratedUnrivaled spares inventory•The service provider for the complete system can •be chosen freelyEasy-to-use and to handle due to simple replace-•ment of individual modules

18 19

WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 · 32385 Minden Hansastraße 27 · 32423 Minden Phone +49 571/887-0 Fax +49 571/887-169 info@wago.com www.wago.com

0888

-057

9/00

04-0

101-

I/O

KN

X/EI

B - 3

.0 -

E - 0

1/08

- Pr

inte

d in

Ger

man

y, JA

- Su

bjec

t to

desig

n ch

ange

s