knx the worldwide standard for home and building control caba home council meeting august 2013

15
KNX The worldwide STANDARD for home and building control CABA Home Council Meeting August 2013

Upload: ayden-duncan

Post on 14-Dec-2015

213 views

Category:

Documents


0 download

TRANSCRIPT

KNX

The worldwide STANDARD for home and building control

CABA Home Council MeetingAugust 2013

KNX Association International Page No. 2September 2012

KNX: The worldwide STANDARD for home & building control

Content

Introduction• KNX’ 10 strong points• KNX technology overview• KNX: how does it work hard- and software?

KNX latest evolutions• Recent KNX standard extensions• Recent extensions to the ETS Software

Efforts of KNX to lower entry barriers• KNX eCampus• KNX Online Catalogue

KNX and Smart Metering/Smart Grid• KNX and energy efficiency• KNX City

KNX Association International Page No. 3September 2012

KNX: The worldwide STANDARD for home & building control

KNX: 10 strong points (1)

Manufacturers• More than 300 from 34 countries worldwide

Strong Association• International Association in Brussels and 36 national groups worldwide

Intellectual Property Rights• Free for KNX members – No single source technology

Fit for use on different media and in different application domains• Twisted Pair, wireless, IP and PL• Lighting, Façade control, security, any type of zoned HVAC control, Monitoring,

Metering, Load shedding, Scheduling, Audio control, …. Seamless interoperability

Between products of different manufacturers/application domains

KNX Association International Page No. 4September 2012

KNX: The worldwide STANDARD for home & building control

KNX: 10 strong points (2)

One common design and commissioning tool• ETS™ Engineering Tool Software• Easy Mode mechanisms however allow linking without ETS for simple functions

and smaller scale installations Common Training

• Network of more than 250 independent KNX training centers in 49 countries worldwide

Product Certification• Products with KNX Trademark have been positively tested by third parties

Internationally standardized• CENELEC EN 50090 – CEN 13321 - ISO/IEC 14543-3 – GB/T 20965

Large service network of qualified contractors/designers/integrators• More than 37500 KNX partners in 121 countries worldwide

KNX Association International Page No. 5September 2012

KNX: The worldwide STANDARD for home & building control

KNX – the overall picture!

KNXnet/IP Routing multicast address

KNX PL

123

64

1.14.0

TP PLMC

KNX RF

1.15.0

1

23

64

TP RFMC

2.0.0

15.0.0

3.0.0

1.1.0

KNX TP

123

64

123

64

1.2.0

123

64

1.13.0

TP LC

1.0.0

IP router KNX IP

Project datain XML

KNX Association International Page No. 6September 2012

KNX: The worldwide STANDARD for home & building control

How does it work – Hardware ?

• Application: Individual room control (used medium TP)• Needed devices

TP Power Supply (with integr.

Choke)

USBRoom

thermostatValve

KNX Association International Page No. 7September 2012

KNX: The worldwide STANDARD for home & building control

How does it work – Software ?

Or change temperature via bus

Set desired T°C manually

Group Msg change T°C

Is T°C > set point

Group Msg close Valve 0%

KNX Association International Page No. 8September 2012

KNX: The worldwide STANDARD for home & building control

The KNX Standard – recent evolutions

Extending KNX’ USPs also to KNX RF• KNX RF Multi Channel Extension

I. Making it less susceptible to interference in the used frequency band• KNX RF+ Extension

I. Integrating KNX RF devices more easily with ETS into existing installations

• KNX Flexible Easy Mode channels

I. Make this configuration mode also the preferred choice for smaller scale (starter) installations and mobile devices

Securing KNX Frames• Necessary system extension for smart metering/smart

grid realizations• Encryption and Authentication possible for all KNX

media• Including specification for configuration of secure devices

(with ETS)

KNX Association International Page No. 9September 2012

KNX: The worldwide STANDARD for home & building control

ETS – recent evolutions

The ETS App Concept• Presented at light+building 2012• Launched in May 2012 with ETS 4.1 version• Reasons:

I. Do not confuse newcomers with unnecessary (complicated) functionality

II. Not all functionality desired by ETS users can be realized on the association budget

III. Allow specific design tools for KNX installations for different markets, but keep ETS as only download engine

Internationalize use of ETS: 17 supported languages! Future ETS

• ETS 5 – scheduled launch light+building 2014I. support all KNX media, including KNX RF

II. Do away with MS SQL database for storing project data

KNX Association International Page No. 10September 2012

KNX: The worldwide STANDARD for home & building control

Lowering barriers for KNX newbies (1)

KNX eCampus• Getting Started with KNX and ETS before going to 5 day course• Free of charge Web based Training Scheme to acquaint oneself with

- KNX Technology (Topology, Communication Media, …)- Setup of ETS- Working with ETS (creating new project, establishing links, downloading, …)

• For each chapter: exercise and test• At end: eCampus

certificate and ETS Lite Version

Available in 10 languages > 1000/monthly registered

eCampus users

KNX Association International Page No. 11September 2012

KNX: The worldwide STANDARD for home & building control

ETS App ‘Online Catalogue’• This was then:

- ETS End User version is not shipped with databases of available KNX products

- ETS user can not start work immediately must find the ETS databases via the web sites of the different KNX solutionproviders

• Now also- KNX Manufacturers can upload product databases for their available

products on KNX server- Differentiation of product databases for different markets/languages

possible- Installed App can retrieve product databases directly from the KNX server

• Price- Totally free of charge for KNX manufacturers and registered ETS users

Lowering barriers for KNX newbies (2)

KNX Association International Page No. 12September 2012

KNX: The worldwide STANDARD for home & building control

Improve energy efficiency with KNX

Scientific studies (HS Bremen, TU Trento)• Up to 50% energy reduction compared to conventional installation techniques in a

well insulated building Calculate effect of KNX on energy efficiency by tools of KNX members KNX controlled HVAC applications

• KNX Room Controllers• KNX Schedulers• Presence Detectors• Window Contacts• C02 sensors

KNX Controlled Lighting• Daylight intensity sensors• Presence Sensors

KNX controlled Sun Shading• Weather stations• Blind actuators

KNX Smart Metering/Smart Grid

KNX Association International Page No. 13September 2012

KNX: The worldwide STANDARD for home & building control

KNX City: vision = reality

Buildings

Energy efficient buildings with KNX are the

basis for sustainable cities

Mobility

The eCar is an integral part of the intelligent

building based on KNX

Infrastructure

Individual homes and buildings are

interconnected through KNX

Energy production

Renewables are an integral part of the

intelligent building based on KNX

KNX Association International Page No. 14September 2012

KNX: The worldwide STANDARD for home & building control

Why wait? check it out!

KNX Handbook for Home and Building Control• Available from KNX Association

Participate in (free of charge) KNX eCampus• https://onlineshop.knx.org • Online course to acquaint with principles of KNX/ETS

Visit KNX basic course at KNX certified training center• http://www.knx.org/knx-partners/training-centres/list/

Thank you for your attention!

Contact: [email protected] – www.knx.org