koeng scope of business - tradekeyimgusr.tradekey.com/images/uploadedimages/brochures/2/7/...intel...
TRANSCRIPT
KOENGSCOPE OF BUSINESS
Automotive
service
equipment
Education &
Training
equipment
Lubrication
equipment
Industrial
balancing
machine
Car washing
machine
Made in Korea
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Education & Training Equipment
Lubrication Equipment
Car Washing Machine
Industrial Balancing Machine
Made in Korea
1. Car Lifts
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Made in Korea
KET-4000G
CAR LIFT 2 POST 4TON / 4 POST 4TON+2TON
KET-4000
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Specification
Model KET-4000G KEF-4000Capacity 4,000 kg 4,000 kg Jack: 2,000 kgMax. Lifting Height (mm) 1,880 ~ 2,032 Body: 1,750 / Jack: 455 mm Lifting speed 40 ~ 60 sec Body: 40 ~ 60 sec, Jack: 5~15 secLowering Speed 30 ~ 45 sec 30 ~ 45 secWeight 760 kg 1,450 kgDimension (mm) 3,028 (L) X 3,450 (W) X 3,771 (H) 5,318 (L) X 3,414 (W) X 2,215 (H)
Power Supply & Motor 1 ph : 2.5 HP, 4P, 220V, 50/60Hz3 ph : 2.0 HP, 4P, 380V, 50/60Hz
1 ph : 2.5 HP, 4P, 220V, 50/60Hz3 ph : 2.0 HP, 4P, 380V, 50/60Hz
Made in Korea
KEX-3500
SCISSORS KEX-3500
Specification
Model KEX-3500 Capacity 3500 kg
This is professional lifting equipment for saloon car’s maintenance and examining. It is very simple to handle and working credibly. Especially for the full hydraulic pressure working system, it is suitable for various situation.
• Scissor concealing platform structure which occupied small space.• Easy for tire of mount and dismount and chassis maintenance.
Features
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Model KEX-3500 Capacity 3500 kgMotor power 2.2 kwPower supply 380/220VLifting Height (mm) 2050 mmPlatform Height 380 mmPlatform length 1450-1750 mmPlatform Width 550 mmLifting speed ≤55Dropping speed ≤55Width 1900 mmLength 1550 mm
Made in Korea
KEX-5500A
CAR LIFT SCISSORS KEX-5500A
Specification
Model KEX-5500A Main unit 5500 kg
• Level can be well adjusted to meet the need for wheel alignment• Luxurious scissor wide-platform structure with super synchronization.• With hydraulic lock and mechanical dual-gear safety-claw lock double safety device, automatically
open when lowering. By lock operation can has the safety-claw located adversely, safe & reliable.
Features
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Model KEX-5500A
Capacity Main unit 5500 kg 2nd lifting trolley 3000 kg
Motor power 2.2 kwPower supply 380/220V
Lifting Height (mm) Main unit 1850 mm2nd lifting trolley 490 mm
Platform Height 380 mm
Platform length Main unit 5000 mm2nd lifting trolley 880-1280 mm
Platform Width Main unit 620 mm2nd lifting trolley 175 mm
Lifting speed Main unit ≤552nd lifting trolley ≤12
Dropping speed Main unit ≤552nd lifting trolley ≤12
Width 2040 mmLength 5500 mm
Made in Korea
KEF-6000
CAR LIFT 4 POST 6~8TON KEF-6000/ KEF-8000
KEF-8000
• Auto level locking position for wheel alignment • Individual control switch on each bridging jack • Perfectly free auto electrical safety locking • Cable remote control included (6button) • Adopted twin wire ropes
Model KEF-6000 KEF-8000Capacity Main 6,000 kg Main 8,000 kg /Jack 3,000 kgMax. height Main 1,796mm Main 1,820mm /Jack 455 mm
Min. height Main 230 mm Main 245mm /Jack 225 mm
Overall width 3,617mm 3,796mm
Specification
Features
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Overall width 3,617mm 3,796mmDrive-through clearance 2,980 mm 3,160mm
Length 7,140 mm 7,630mmOverall height 2,160 mm 2,160 mmLifting speed Main 50sec. Main 50sec. Jack 8 sec.Lowering speed Main 35sec. Main 35sec. Jack 5-15 sec.
Motor1PH : 2.5HP X 4P X 220V X 50HZ or 60HZ 3PH : 2HP X 4P X 220V/380V X 50HZ or 60HZ
1PH : 2.5HP X 4P X 220V X 50HZ or 60HZ 3PH : 2HP X 4P X 220V/380V X 50HZ or 60HZ
Operation Control panel (push button) & cable remote control type
Control panel (push button) & cable remote control type
Made in Korea
KEX-3200
SCISSORS IN GROUND TYPE LIFT KEX-3200/ KEX-3300(3.3 TON)
KEX-3300
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Model KEX-3200 KEX-3300Capacity 3,000 kg 3,300 kgOverall Height 1,800 mm 1,870 mm
Lifting Time 40 - 60 sec 38 - 45 sec
Overall width 1,970 mm 2,116 mmNet Weight 920 kg 750 kg
Power Supply & Motor 1 ph: 2.5HP x 4P x 220V x 60Hz3 ph: 2.0HP x 4P x 220V/380V x60Hz
1 ph: 2.5HP x 4P x 220V x 50/60Hz3 ph: 2.0HP x 4P x 380V x 50/60Hz
Specification
Made in Korea
• Because of jack bridge with oil pressure method, it can be easily used almost all kinds of car repairs.
• Ease control id the benefit. Possible to use various type of alignment turntables.
• Adjustable plate for turntable height. Triple equilibrium system (torsion bar/distribution valve/balance wire) ensure strict synchronization of plate moving.
• Safety is guaranteed due to multi gear type brake system and also multi-point alignment horizontal balance is kept.
• Accommodate wide range of vehicle. (Width & height adjustable turn table)
• Individual control switch on each bridging jack.
• Lockable rear side slip plate.• Heat treated grease pin & maintenance
free bearing.• Anti-drop valve.• Pneumatic two-level jack lift.• Multi-level electronic safety device.
KEX-4000A (H)
WHEEL ALIGNMENT SCISSORS TYPE LIFT / KEX-4000A (H)
Features
• Because of jack bridge with oil pressure method, it can be easily used almost all kinds of car repairs.
• Ease control id the benefit. Possible to use various type of alignment turntables.
• Adjustable plate for turntable height. Triple equilibrium system (torsion bar/distribution valve/balance wire) ensure strict synchronization of plate moving.
• Safety is guaranteed due to multi gear type brake system and also multi-point alignment horizontal balance is kept.
• Accommodate wide range of vehicle. (Width & height adjustable turn table)
• Individual control switch on each bridging jack.
• Lockable rear side slip plate.• Heat treated grease pin & maintenance
free bearing.• Anti-drop valve.• Pneumatic two-level jack lift.• Multi-level electronic safety device.
Model KEX-4000A (H)Lifting Capacity (kg) Body : 4,000 / Jack : 2,000 kg Max. Lifting Height (mm) 1,900 mm Jack : 455 mmLifting speed Body : 40 ~ 60 sec, Jack : 5~15 sec
Specification
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Lifting speed Body : 40 ~ 60 sec, Jack : 5~15 secLowering Speed Body : 35 ~ 45 sec, Jack : 10~30 sec Weight 4,200 mmDimension (mm) 5,606(L) X 2,150(W) X 260(H)
Power Supply & Motor 1 ph : 2.5 HP, 4P, 220V, 50/60Hz3 ph : 2.0 HP, 4P, 380V, 50/60Hz
Made in Korea
2.Wheel Alignment
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Made in Korea
• Measurement technology of 3D image capture• Wireless communication with fast response
and high precision• Accurate and fast measurement and correction• Regular zero calibration unnecessary• No effects on horizontal status of lift• Auxiliary LCD monitor (22˝ LCD) can be
mounted (separate option)
Model KE 750Display 22˝ LCD wide monitor
Control type 32 bit microprocessor
Clamp Can measure 12 ~ 22˝
KE 750
Specification
3D WHEEL ALIGNMENT KE 750
Features
Clamp Can measure 12 ~ 22˝
Measurement accuracy 0.01° / 1˝
Measurement type 3 D image capture measurement
Calibration angle ±5°
Dimension Colum : 2700 x 350 x 2700 mmCase : 570 x 570 x 1530 mm
Power Supply 220V, 50 / 60 Hz
CCD525 Specification
WHEEL ALIGNMENT CCD 525
Model CCD 525Computer system Intel Pentium4
Sensor 4Heads, 8 CCD image sensorOperating system Windows XP
Monitor 17" LCD monitorPrinting device
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
• 8 CCD image sensors• Special filter prevents sunbeam obstacles
during measurement• Functions to save customer's data to USB or
Floppy disk• Show the simulation of adjustment by 3D
dynamic image• Self-diagnosis program
Monitor 17" LCD monitorPrinting device Desk jet printer
Wheel clamps
4-point clamps 11" - 22" range (Optional 24" adapter)
Measuring precision
Setback 0.01 degreeToe 0.01 degree
Caster 0.02 degreeCamber 0.02 degree
Measuring range
Setback ±2.0 degreeTotal Toe ±50mm
Caster ±18.0 degreeCamber ±8 degree
Transmission way Both wires or wireless communication
Rated voltage 100 - 240v, 50/60Hz
Rated Power 250WSize 660(L)Ⅹ660(W)Ⅹ1,200(H)mm
Features
Made in Korea
KWA 300
WHEEL ALIGNER KWA 300 / KWA 200
KWA 200
• Prompt & precise alignment with 8 CCD image sensors of high accuracy• Wireless communication with “Bluetooth”(can be used with Wire too)• Program is designed for user suitably• Accurate filter minimizes disturbance from the light• Customer data can be stored in USB or Floppy disk• Minimize measuring error with electric level sensors• Function for measurement and adjustment when the front and rear setbacks are hidden.• Vehicle diagnostic program (Axle-offset, Side-offset, and so on)• Measurement and adjustment for selected item is available• Self-diagnosis to inform the operation or malfunction of unit.
Model KWA300 KWA200Computer Intel Pentium 4 Intel Pentium4
Specification
Features
Plus Monitor(Optional)LCD monitor for operator’s convenience
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Model KWA300 KWA200Computer Intel Pentium 4 Intel Pentium4Sensor 4 Heads Infrared, 8 sensors 4 Heads Infrared, 8 sensorOperating system Windows XP Windows OSPrinting device Desk jet printer Desk jet printer
Wheel size 19 ~ 26 inch 4-point clamps 28" - 30“ Adapter 11" - 22" range (Optional 24" adapter)
Measuring precision
Setback 0.01 degree Setback ±0.02ºToe 0.01 degree Toe ±0.02ºCaster 0.02 degree Caster ±0.05 ºCamber 0.02 degree Camber ±0.02 º
Measuring range
Setback: ±2 degree Setback: ±2 ºTotal Toe: ±50 mm Total Toe: ±50 mmCaster: ±18 degree Caster: ±18 º S.A.I.: ±18 º Camber: ±8 degree Camber: ±8 º Thrust angle: ±2 º
Power supply 100~240V, 50~60Hz 220V ±10%, 50/60HzRated Power 250W 250WType of data body 4HEAD cable mode 4HEAD cable modeSize 660(L)Ⅹ660(W)Ⅹ1,070(H)mm 660(L)Ⅹ660(W)Ⅹ1,200(H)mm
Made in Korea
3. Wheel balancer
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Made in Korea
• Led split function • Body unbalance calibration function• Axis in / out position auto split calibration
function• Auto distance measurement function • 5 module display function• Precise measurement less than 3 g if
measured wheel is reinstalled• Can use 100 V ~ 300V free volt (world first) • Electronic brake function
Maximum Power 500WSpindle Diameter 36 mmMax. outer wheel Diameter 915 mm (36˝)
Specification
COMPUTER WHEEL BALANCER KE 505
KE 505Features
Max. outer wheel Diameter 915 mm (36˝)
Balancing Speed 200 ~ 300 RPMBalancing Accuracy ± 1 / 0.025 ozCycle Time 8 ~ 12 secRim Diameter 10 ~ 20˝Rim Width 1.9 ~ 30˝Max. Wheel Weight 75 kgTotal Weight 80 kgDimension 1520 x 1050 x 1830 mmPower Supply 220V Single-Phase 50/60Hz
KE-505 Adapter
KE 505M
• Led split function • LCD monitor type• Ounce / gram unit conversion• Auto distance, width, diameter input type • Foot brake function• Convenient lead applied if lead attached• Attachable lead out function• Lighting inside wheel • Basic application of wheel cover
Features
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Maximum Power 0.25 KWMax. external wheel Diameter 915 mm (36˝)
Balancing Speed ~ 180 RPMBalancing Accuracy ± 1 gCycle Time 7 secRim Diameter 3 ~ 11˝Rim Width 10 ~ 24˝Max. Wheel Weight 65 kgTotal Weight 160 kgDimension 1350 x 1100 x 1710 mmPower Supply 220V Single-Phase 50/60Hz
• Led split function • LCD monitor type• Ounce / gram unit conversion• Auto distance, width, diameter input type • Foot brake function• Convenient lead applied if lead attached• Attachable lead out function• Lighting inside wheel • Basic application of wheel cover
Specification
Made in Korea
KE 503• Intelligent auto brake system• Measurement of both large-and mid sized
tires available• Long-lasting stable measurement with a strong
spindle shaft using lift big size tire• Automatic balance sensor (active or inactive)• High balancing accuracy of ±1 g / shaft
balancing time of 8 sec/time • Self revision & automatic error diagnosis
Power consumption 0.75 KWLift height (Max.) 350 mmMax. Load (lifting trolley) 150 kg
COMPUTER WHEEL BALANCER KE 503 LARGE SIZE
Features
Specification
Max. Load (lifting trolley) 150 kgBalancing Speed 223 RPMBalancing Accuracy ± 1 gCycle Time 7 ~ 8 secRim Diameter 381 ~ 660 mmRim Width 150 ~ 500 mmAir Pressure 0.6 ~ 0.8 kgMax. Wheel Weight 200 kgTotal Weight (G/N) 200 kg / 240 kgDimension 1520 x 720 x 1350 mmPower Supply 380V 3Phase 50/60Hz
• Professional wheel balancer for 2 wheels • Compact design • Display checking –input • LED display • Piezo sensor signal detecting method • Self-calibration function-Precision measuring
WHEEL BALANCER FOR MOTORBIKE KE-B1024
Features
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Model KE-B1024Measuring time 5~15 sec.Measuring range (W):1.5”~20”/ (D) : 10”~24”Measuring unit 1gSpeed 220~280RPMElectric power supply 1PH/220V(50/60HZ)Dimension 110X775X1300Weight 100KG
Specification
Made in Korea
• 17” color LCD• Microcomputer central processor : Self
calibration and diagnosis functions• 6 optional modes of balancing weight• The ruler head can bear the adhesive weights
and attach the concealed adhesive weights easily
COMPUTER WHEEL BALANCER
KE 8900B
Features
KE 8280B KE 8000B KE 5000B
• 17” color LCD• Microcomputer central processor : Self
calibration and diagnosis functions• 6 optional modes of balancing weight• The ruler head can bear the adhesive weights
and attach the concealed adhesive weights easily
Model KE 8900B KE 8280B KE 8000B KE 5000BMax. Wheel Weight 65kg 65kg 65kg 65kgMotor power 0.2kw/0.37kw 0.2kw/0.37kw 0.2kw/0.37kw 0.2kw/0.37kwBalancing Accuracy ±1g ±1g ±1g ±1gBalancing Speed 200 rpm 200 rpm 200 rpm 200 rpmRim Diameter 10 “– 24” 10 “– 24” 10 “– 24” 10 “– 24”Rim Width 1.5” – 20” 1.5” – 20” 1.5” – 20” 1.5” – 20”Measuring Time 8 sec 8 sec 8 sec 8 secNoise level <70db <70db <70db <70dbPower Supply 220V/110/V 220V/110V 220V/110V 220V/110VPacking size 960 x 760 x 1160mm 960 x 760 x 1160mm 960 x 760 x 1160mm 9615x 760 x 1230mmWeight 131/103kg 130/103kg 122/98kg 112/88kg
Specification
Features
KE 8500B• Suitable for tires of truck and bus• Pneumatic tire lifting device• Self calibration and diagnosis• LED numeric display screen• Equipped with the brake pedal
Features
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
• 17” color LCD• Microcomputer central processor : Self
calibration and diagnosis functions• 6 optional modes of balancing weight• The ruler head can bear the adhesive weights
and attach the concealed adhesive weights easily
Features
Max. Wheel Weight 130kgMotor power 0.4kw/0.6kwBalancing Accuracy ±1gBalancing Speed 200 rpmRim Diameter 10 “– 24”Rim Width 1.5” – 20”Measuring Time 8 secNoise level <70dbPower Supply 220V/110VPacking size 1220x960x1190mmWeight 310/267kg
Specification
• Suitable for tires of truck and bus• Pneumatic tire lifting device• Self calibration and diagnosis• LED numeric display screen• Equipped with the brake pedal
Made in Korea
4. Tire Changer
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Made in Korea
KE -2092T
TIRE CHANGER
KE-2370T
Model KE 2092T KE-2370T KE-2030T KE-2090TMotor power 0.75kw/0.55kw/1.1kw 0.75kw/0.55kw/1.1kw 0.75kw/0.55kw/1.1kw 0.75kw/0.55kw/1.1kwPower supply 220V/400V/110V 220V/400V/110V 220V/400V/110V 220V/400V/110VMax. wheel diameter 45”(1143mm) 45”(1143mm) 45”(1143mm) 45”(1143mm)Max. wheel width 16”(406mm) 16”(406mm) 16”(406mm) 16”(406mm)Outside clamping 12”-23” 12”-23” 12”-23” 12”-23”Inside clamping 14”-26” 14”-26” 14”-26” 14”-26”Air supply 8bar 8bar 8bar 8barBead breaker force 2500kg 2500kg 2500kg 2500kgNoise level <75dB <75dB <75dB <75dBWeight 303/266kg 445/395kg 238/210kg 300/268kgPackage size 1130x900x1030mm 1550x310x550mm 1130x900x1030mm 1130x900x1030mm
Specification
KE -2030T KE-2090T
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Made in Korea
Model KE -2060TMotor power 0.75kw/0.55kw/1.1kwPower supply 220V/400V/110V
Max. wheel diameter 41”(1040mm)
Max. wheel width 14”(355mm)Clamping 6”-24”Air supply 8barBead breaker force 2500kgNoise level <75dBWeight 195/171kgPackage size 960x760x930mm
Specification
TIRE CHANGER / Motorbike, Truck, Bus
KE-2060T
Motorcycle
• Bus, truck• Clockwise and anticlockwise rotation of the clamp range from 14”-26”• Automatic electro hydraulic operation• Movable controlling unit• Hydraulic motor with pressure adjustment device• Automatic fast turning
KE-2614T KE-5614T
Specification
BUS, TRUCK
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
• Bus, truck• Clockwise and anticlockwise rotation of the clamp range from 14”-26”• Automatic electro hydraulic operation• Movable controlling unit• Hydraulic motor with pressure adjustment device• Automatic fast turning
Model KE -2614T KE-5614TPump motor 1.5kw 2.4/3.0kwRotating motor 2.2kw 2.4/3.0kwClamping capacity 14”-26” 14”-56”Max. tire diameter 1200mm 2500mmMax. tire width 700mm 1200mmMax. tire weight 500kg 2200kgWeight 670/520kg 980/860kgPackage size 2000x1580x950mm 2330x2110x1100mm
Specification
Made in Korea
• Clamping way is Vane type for faster and stronger clamping power
• The self-centering clamping jaws clamp• It is adapted the jet blast system(=Tire
inflation system) for better and easier bead sealing work for the high performance tire
• Internal bead sealing air tank make it possible to save the cost and working space
• Mounting head is optimized the design for the mist efficient mounting and dismountionwork
• To eliminate risk of damage to wheel, attached the plastic material on the lower part of the mounting bead
• Joint the transparent panel on the upper part of the pedal for easier confirm the each function of pedals
• Quiet operation
KE 505
SEMI-AUTOMATIC SWING-ARM KE 3005
KE-T500
Techno roller type
• Clamping way is Vane type for faster and stronger clamping power
• The self-centering clamping jaws clamp• It is adapted the jet blast system(=Tire
inflation system) for better and easier bead sealing work for the high performance tire
• Internal bead sealing air tank make it possible to save the cost and working space
• Mounting head is optimized the design for the mist efficient mounting and dismountionwork
• To eliminate risk of damage to wheel, attached the plastic material on the lower part of the mounting bead
• Joint the transparent panel on the upper part of the pedal for easier confirm the each function of pedals
• Quiet operation
Model KE 3005 KE-T500Wheels handled Alloy & Steel & Aluminum Alloy 7 Steel & AluminumSelf-centering clamping way Vane type Vane type
Rim clamping diameter Outer: 24"~12“Inner: 22"~10"
22"~12"
Max rim width 400mm 22"~10"Max tire diameter 1100mm 400 mmBead-breaker Force 2140Kg 1,100 mmBead breaking distance 340mm 2,140 KgMax height x width 1900mm x 1200mm 340 mm
Specification
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
• Clamping way is Vane type for faster and stronger clamping power
• The self-centering clamping jaws clamp• It is adapted the jet blast system(=Tire
inflation system) for better and easier bead sealing work for the high performance tire
• Internal bead sealing air tank make it possible to save the cost and working space
• Mounting head is optimized the design for the mist efficient mounting and dismountionwork
• To eliminate risk of damage to wheel, attached the plastic material on the lower part of the mounting bead
• Joint the transparent panel on the upper part of the pedal for easier confirm the each function of pedals
• Quiet operation
Max height x width 1900mm x 1200mm 340 mmOperation pressure 8~12Bar 1,900 mm / 1,200 mmMotor 2Hp 8~12 Bar / 2 HpChuck rotation speed 18rpm 18 rpmElectrical requirements 1ph, 115V/24V, 220V/12A 1ph, 115V/24V, 220V/12AShipping dimension 900(W)×1120(L)×900(H)mm 900 (W) × 1,120 (L) × 900 (H) mmShipping weight(NET/GROSS) 290Kg/320Kg 290 Kg / 320 Kg
Standard accessory Air pressure gauge, Air regulator, Rim lever, Brush, Oil barrel
Air pressure gauge, Air regulator, Rim lever, Brush, Oil barrel
<Techno Roller Specification>Moving range(Up and down) 400mm 400 mmApplicable size 13"~14" 10"~24"Working air pressure 8~10 8~10Cylinder diameter 80mm 80mmSize and Weight 1300 X 1888 X 1045mm / 70kg 1,300 x 1,888 x 1,045 mm / 70 kg
Made in Korea
Model KE- 2614Max. Rim Diameter 26" (660.4 mm)Min. Rim Diameter 14" (355.6 mm)Max. tire size (Outer) 1600 mm
Width Max. 2,045 mmMax.1,905 mm
Length Max. 1,950 mmMin. 1,550 mm
Height Max. 1,250 mmMin. 710 mm
Power supply & motor capacity
1.5KW. 220V/380V, 3Ph, 50/60Hz
Control method Limit controlNet weight 518 kgPressure 0-130 barOption Adaptor for 26.5”
KE 2614
HEAVY DUTY CAR TIRE CHANGER KE 2614
Specification
Model KE-T1024(Motor-bike)
KE-T0614(Golf car)
Wheel size Inside 10"~18" Outside 14"~24"
Inside 6”~14”Outside 8”~14”
Bead breaker Professional bead breaker -4EA
KE-T1024 KE-T0614
SpecificationSEMI-AUTO MOTOR BIKE(KE-T1024) / GOLF CAR(KE-T0614)
Specification
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Distance of bead breaker 280mm
Max. tire width 320mm
Diameter 920mm
Torque 80~90KGS
Electric power supply 220V(60HZ ,1.5 HP)
Size 800X1000X1500
Weight 190KG
Made in Korea
Model KE-T 2406Motor power 0.75kwPower supply 220V/400V/110VMax. wheel diameter 41’’ (1040mm)Max. wheel width 14’’(355mm)Clamping 6’’~24’’Air supply 8barBead breaker force 2500kgNoise level <75dBWeight 194/170 kg
KE-T2406
MOTOR BIKE TIRE CHANGER KE-T2406
Specification
Features
• Semi-automatic• Suitable for car, motorcycle• 20” turntable and powerful motor
Weight 194/170 kgPackage size 960*760*930mm
• Humanization designed mounting & demounting head special for motorcycle
• Clamping: 6’’~24’’ • Adjustable clamp suitable for motorcycle
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Made in Korea
5. Automotive Fluid Exchanger
① ATF(Automatic transmission Fluid)② Power steering fluid③ Brake oil④ Oil Drainer
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
27
Made in Korea
• It is possible to full exchange of A.T.F in the inside auto-mission such as cooler, converter and hose line, and this prevent from auto-mission's damage and power drops by residual A.T.F.
• In spite of reverse connection of INPUP and OUTPUP between transmission and oil exchange, the direction is changed to right flow automatically.
• Words on vehicle transmission deshned with or without ARF dipsticks.
• Before full automatic operation, you need just set the amount of oil for exchange and push the button, "START"
• The consumption of new oil is less because it is designed to start new oil's injection after discharge 1ℓ of used oil.
• It is possible to choose any kinds of new oil what users need. • It is possible to change oil of transmission for the large-sized
bus and trucks.
Features
• You do not need to drop the transmission pan, this means no spillage, so there is no mess.• Hooks up directly to the automatic-transmission cooler lines.• Lighted flow indicator, so you can see old fluid color change during process.• Easy to use pre-assembled adapters for quick hook up to virtually all makes and models.• Requires no pit, lift or ramp, so it can be used almost anywhere.• Operates on vehicles on 12-volt power---another factor in its usability anywhere.• Pumps new fluid in at the same time it pumps the used fluid out.• Uses vehicles own transmission at normal operating pressure to pump used fluid from vehicle.• Replaces virtually 100% of fluid from the system the torque converter, pump, cooler lines and r
adiator.• Is an excellent diagnostic tool: its pressure gauge quickly tells you if the vehicles transmission
pump is malfunctioning.• Completes a fluid exchange typically in less than 10 minutes.
Features
AUTO-2010Ⅱ
Automatic Transmission Fluid CHANGER
HAT 8000 ATF 2005
• It is possible to full exchange of A.T.F in the inside auto-mission such as cooler, converter and hose line, and this prevent from auto-mission's damage and power drops by residual A.T.F.
• In spite of reverse connection of INPUP and OUTPUP between transmission and oil exchange, the direction is changed to right flow automatically.
• Words on vehicle transmission deshned with or without ARF dipsticks.
• Before full automatic operation, you need just set the amount of oil for exchange and push the button, "START"
• The consumption of new oil is less because it is designed to start new oil's injection after discharge 1ℓ of used oil.
• It is possible to choose any kinds of new oil what users need. • It is possible to change oil of transmission for the large-sized
bus and trucks.
Features
AUTO2010 Adaptor No. APPLICABLE CARS
• You do not need to drop the transmission pan, this means no spillage, so there is no mess.• Hooks up directly to the automatic-transmission cooler lines.• Lighted flow indicator, so you can see old fluid color change during process.• Easy to use pre-assembled adapters for quick hook up to virtually all makes and models.• Requires no pit, lift or ramp, so it can be used almost anywhere.• Operates on vehicles on 12-volt power---another factor in its usability anywhere.• Pumps new fluid in at the same time it pumps the used fluid out.• Uses vehicles own transmission at normal operating pressure to pump used fluid from vehicle.• Replaces virtually 100% of fluid from the system the torque converter, pump, cooler lines and r
adiator.• Is an excellent diagnostic tool: its pressure gauge quickly tells you if the vehicles transmission
pump is malfunctioning.• Completes a fluid exchange typically in less than 10 minutes.
FeaturesModel AUTO-2010 Ⅱ HAT-8000 ATF-2005
Main power AC220V/50~60Hz 1 PH AC220V/60Hz or DC12V AC220V/60Hz or DC12V
Kind of pump Trochoid Pump Trochoid Pump GEAR PUMP
Pump capacity 4.5 ℓ /MIN. / 1,700rpm 4.5ℓ/ MIN. / 1,800rpm 4.5ℓ±5% /MIN.
New fluid tank capacity 22ℓ 80ℓ (40ℓ x 2ea) 20ℓ
Used fluid tank capacity 22ℓ 20ℓ 20ℓ
Size(mm) 600(W)×560(D)×1,040(H) 560(W)×570(D)×1,055(H) 500(W)×550(D)×900(H)
Weight 80kg 70Kg 35Kg
Specification
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
• It is possible to full exchange of A.T.F in the inside auto-mission such as cooler, converter and hose line, and this prevent from auto-mission's damage and power drops by residual A.T.F.
• In spite of reverse connection of INPUP and OUTPUP between transmission and oil exchange, the direction is changed to right flow automatically.
• Words on vehicle transmission deshned with or without ARF dipsticks.
• Before full automatic operation, you need just set the amount of oil for exchange and push the button, "START"
• The consumption of new oil is less because it is designed to start new oil's injection after discharge 1ℓ of used oil.
• It is possible to choose any kinds of new oil what users need. • It is possible to change oil of transmission for the large-sized
bus and trucks.
Features
AUTO2010 Adaptor No. APPLICABLE CARS 1 Mercedes Benz2 BMW3 GM4 Alfa Romeo5 Volvo6 Volkswagen, Renault7 Audi
8 Japanese/Korean cars, Opel
9 SAAB, Citroen, Lancia10 Japanese/Korean cars, Opel11 Japanese/Korean cars, Opel12 Volkswagen, Austin13 Peugeot 405, Austin 2000cc
14 Hose
• You do not need to drop the transmission pan, this means no spillage, so there is no mess.• Hooks up directly to the automatic-transmission cooler lines.• Lighted flow indicator, so you can see old fluid color change during process.• Easy to use pre-assembled adapters for quick hook up to virtually all makes and models.• Requires no pit, lift or ramp, so it can be used almost anywhere.• Operates on vehicles on 12-volt power---another factor in its usability anywhere.• Pumps new fluid in at the same time it pumps the used fluid out.• Uses vehicles own transmission at normal operating pressure to pump used fluid from vehicle.• Replaces virtually 100% of fluid from the system the torque converter, pump, cooler lines and r
adiator.• Is an excellent diagnostic tool: its pressure gauge quickly tells you if the vehicles transmission
pump is malfunctioning.• Completes a fluid exchange typically in less than 10 minutes.
Features
Made in Korea
Model HPM 6000Power (vehicle battery). 12V DC Pump Dual pump
Tank Capacity New: 4ℓ (2ℓ x 2ea)Oil: 12ℓ
Size 410x410x945(mm) Weight 30kg
For Power Steering oil
ODC 100
Model ODC 100Operating method By AirAir pressure 5 ~ 12Kg/Suction pressure -50 ~ -76cmHGTank Capacity 7ℓStorage tank capacity 100ℓThe maximum height of drain 1600mm
For Engine oil
HPM 6000
POWER STEERING FLUID EXCHANGER/ BRAKE FLUID EXCHANGER
Specification
KE 986A
The maximum height of drain 1600mmDimension 590 x 420 x 1,300Weight 41.25KG
Accessory Suction tube large, medium,small of long each 1pcs
BC 111
BRAKE FLUID EXCHANGER
KE 201D KE 201S
SUCTION OIL DRAINER
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Model KE 986A BC111
Pump Air Compressing Piston Type 6∼10kg/
Air pressure 2Kgf/ -50cmHG ∼-70cmHG
Max. Pressure 4Kgf/Tank Capacity 3ℓ 1.5ℓWeight 28kg 1.25kgDimension(mm) 450 x 460 x 910 190 x 180 x 260
Specification
MODEL KE 201D KE 201DExcretion Compressed Air Compressed AirMax. Pressure 4 kgf/ 4 kgf/Suction Pressure 640 mmHg/6 kgf/
Capacity 10ℓ (sub)/ 70ℓ(Main) 70 ℓWorking Height (Min / Max) 1170/1670 mm 1170/1670 mm
Weight 55 kg 40 kgAir Nipple 1/4˝Dimension 830 x 530 x 1170 750 x 750 x 1170
• Built-in air filter eliminates moisture
Specification
Made in Korea
6. Equipment of Engine performance improvement
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
30
Made in Korea
• Remove carbon deposit in fuel line & common rail & injectors
• Decrease toxic exhaust gas amount / max. 50 % • Increase horsepower and acceleration / max. 15-3
0 % • Improve fuel economy / max. 3-8 % • Available to clean all gasoline & CRDI engine
Model 700Power DC 12 volt / Battery Adapter International standard connectors
Tank capacity 3 liter per each gasoline & diesel separately(2 tank )
Dimension 49 x 49 x 97 cm Weight 36 kg Cleaning pressure ControllableTimer Digital
700
GASOLINE & DIESEL LINE CLEANING SYSTEM
Specification
Features
ANTI-FREEZE RECYCLER & COOLING SYSTEM CLEANER
• Radiator engine cleaning system • Supersonic pipe cleaning with an air pumping
system• Powered air generation without using electric
system• Separate waste oil with simple operation of valve • Four direction valve (self developed)
ENGINE COOLANT CLEANER & RECYCLING KE 507A
KE 507A Features
• Easy to exchange anti-freeze cleaning the entire cooling system can select to anti-freeze in two type available to use cleaning chemical simple method of connecting to vehicles & start-up suction function for reserve tank and others
• Patent registered
Model 450
POWER AIR PRESSURE (MAX 2.5Kg/Cm3)
SIZE 540 × 640 × 1100 mm
WEIGHT 48 Kg
CAPACITY 20 ℓ × 3 JAR
450HPM 2005
ANTI-FREEZE RECYCLER & COOLING SYSTEM CLEANER Features
Specification
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
• Radiator engine cleaning system • Supersonic pipe cleaning with an air pumping
system• Powered air generation without using electric
system• Separate waste oil with simple operation of valve • Four direction valve (self developed)
MODEL KE 507APower 1 Air Diaphragm PumpMax. Displacement 20ℓ /minuteOperation Pressure 4 bar (4kg/)Corresponding LLC Green Operation displacement pressure 0 ~ 1.5 bar (0.15 MPa, 1.5 kg)
Tank Two 20ℓ tanks with complete separation of two liquids
Filter A set of two (5 µ and 25 µ)Dimension 480 x 630 x 1120Dimension 50 kg (Empty), 85 kg (Full)
Surprise (Ion Activator) / Punch (antifreezingsolution regenerant) / KE13(radiator detergent)
KE 507 Adapter
Specification
Made in Korea
• Engine flushing + Oil drain + Suction function• Flushing: Compulsion circulation way-superb
flushing capacity • Re-input( 7.0 Liters / Min.) after filtration• Checking oil & circulation condition through
transparency screen
MODEL KE 617
Motor
Max. Power 0.21 KW, ¼ HPVoltage AC 220 V, 50 / 60 HzElectric current 2.8 ARPM 1710 RPM
PumpType TrochoidCapacity 7.0ℓ /minMax. Pressure 7.0 kgf/
Dimension 600 x 680 x 1250
ENGINE FLUSH MACHINE KE617
KE 617Features
Specification
Engine performance Improvement
• Recovery/ Recycle/ Vacuum/ Charge• Electron balance protection system for impact absorption• Large size dual condenser installation• Operating method is easy progressive form display screen and
membrane keyboard• Fine digital Electron Balance(10g/50kg)• Core type large size dry filter• High temperature/ High pressure compressor for only refrigerant• Station vacuum pump/ Full automatic injection function• Automatic discharge function for waste oil• Automatic refrigerant transfer and tank receipt• Overpressure power prevention and inside protection system• Refrigerant injection amount memory function for all models of car• Multi Languages support• 3”1/2 inch large size gauge only for refrigerant(Made in USA)• 16kg recovery tank • 3000mm high pressure hose only for refrigerant• Parker quick Adapter• Charge function(option)
Features
Dimension 600 x 680 x 1250Cone Height (stroke) 480 (max. ~ min.)Weight 76 kgHose Length (machine standard) IN : 4,000 OUT : 4,500
Power code 3,000Waste output hose 1900Bending pipe 400Output valve 15 AHigh and low regulation pipe valve 40 A
1. Engine noise decrease(About 7~10 db)2. Compression ratio improvement(10~20%)3. Continued ration improvement and fuel
curtailment(10~20%)4. Travelling performance and power
improvement
• Recovery/ Recycle/ Vacuum/ Charge• Electron balance protection system for impact absorption• Large size dual condenser installation• Operating method is easy progressive form display screen and
membrane keyboard• Fine digital Electron Balance(10g/50kg)• Core type large size dry filter• High temperature/ High pressure compressor for only refrigerant• Station vacuum pump/ Full automatic injection function• Automatic discharge function for waste oil• Automatic refrigerant transfer and tank receipt• Overpressure power prevention and inside protection system• Refrigerant injection amount memory function for all models of car• Multi Languages support• 3”1/2 inch large size gauge only for refrigerant(Made in USA)• 16kg recovery tank • 3000mm high pressure hose only for refrigerant• Parker quick Adapter• Charge function(option)
MODEL MS 682 REMARKSRefrigerant HFC - R134a CFC - R12 Order made
Control Micro controllerAdaptation of electronic scale,Sensor, solenoid.
Display Graphics LCD 240*128Keyboard Membrane Type 22 KeyPress. Gauge 3’ 1/2 inch ( 93∮ )
SolenoidExclusive use for high pressure Made in Korea
CAR AIRCONDITIONING REFRIGERANT RECYCLING MS 682
MS 682Specification Features
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
• Recovery/ Recycle/ Vacuum/ Charge• Electron balance protection system for impact absorption• Large size dual condenser installation• Operating method is easy progressive form display screen and
membrane keyboard• Fine digital Electron Balance(10g/50kg)• Core type large size dry filter• High temperature/ High pressure compressor for only refrigerant• Station vacuum pump/ Full automatic injection function• Automatic discharge function for waste oil• Automatic refrigerant transfer and tank receipt• Overpressure power prevention and inside protection system• Refrigerant injection amount memory function for all models of car• Multi Languages support• 3”1/2 inch large size gauge only for refrigerant(Made in USA)• 16kg recovery tank • 3000mm high pressure hose only for refrigerant• Parker quick Adapter• Charge function(option)
SolenoidExclusive use for high pressure Made in Korearefrigerant
Block High precision process Made in KoreaCondenser DUAL Type Made in KoreaQuick adapter Manual Type Made in USAFilter dryer 33sq.IN Core TypeLoadcell 10g / 50kgCompressor 220V 4.0A 1/3 HP 50HZ Vacuum pump 220V 3.0A 3CFM Tank capacity 12kg Liquid Full - 18kg
CaseHigh quality resin molding and Light Green/Dark GraySteel structure
Use temp10 ~ 45 Possible with low temperature(Passed high temperature test) injection
Power AC 220V / 60HZ 50Hz (Option)Weight 87kg -Base size 750*500*1080 -
Features
Made in Korea
7. GARAGE JACKS & MULTI PRESS
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
33
Made in Korea
KP 5000
Model KP 5000 KP 3000Capacity 5 ton 3 tonMin height 110 mm 150 mmMax height 490 mm 510 mmFrame length 1,150 mm 1,030 mmHeight 1,330 mm 1,330 mm
AUTO AIR GARAGE JACK
Model KK-8863 KK-8870 KK-8871Capacity 65 / 35 / 18t 60 / 30t 40 / 20tLength 780 mm 520 mm 550 mmWidth 210 mm 220 mm 200 mmMin height 155 mm 185 mm 175 mmMax height 335 mm 355 mm 345 mm
Specification
KP3000 KK-8871
AIR HYDRAULIC JACK
KK-8870
2 stage
KK-8863
3 stage 2 stage
Height 1,330 mm 1,330 mmWidth 300 mm 280 mmAir pressure 8~10 kgf/cm2 8~10 kgf/cm2
Length of handle 1,250 mm 900 mmWeight 89 kg 77 kg
Model Unit KF 10000 KF 5000 KF 3000Capacity(ton) ton 10 5 3Height mm 1,380 410 1,350Max height mm 560 560 800Min height mm 160 150 140
Max height 335 mm 355 mm 345 mmTravel distance 180 mm 170 mm 170 mm Air pressure 8 ~ 10 kgf/cm2 8 ~ 10 kgf/cm2 8 ~ 10 kgf/cm2
Weight 66 kg 61 kg 51 kg
MANUAL GARAGE JACK
Model Unit KE 8800(A) KE 8800
Capacity(ton) ton 2 2Length mm 1,330 1,190Min height mm 850 850Max height mm 2,700 2,700
KF 10000 KF 5000 KF 3000 KE 8800(A) KE 8800
Rotation Fixed
ENGINE CRANE
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Min height mm 160 150 140Weight kg 133 95 65 Max height mm 2,700 2,700
Operating 2 level handle pump
Model Unit KB 8000 KB 8700 KB 8900 KB 9100Capacity Ton 0.8 0.5 1.5 2Min height mm 850 850 195 200Max height mm 1,800 1,700 840 840Weight kg 76 68 104 145
TRANSMISSION JACK
KB 8000 KB 8900KB 8700
Air/Hydraulic Hydraulic Hydraulic
KB 9100
Made in Korea
MULTI PRESS KE2500
Model KC 301 KC 5500(A)
Length(mm) 600 600Width(mm) 960 880
Height(mm) 1,600 1,840
Air pinpress
KC 301 KC 5500(A)
Specification
Height(mm) 1,600 1,840
Max Capacity(ton)
30 80
Air Capacity(K) 8-10
Weight(kg) 233 292
Air pinpress
FRAME JACK
KR 30000 KR 15000 KR 7000
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Air pinpress
Model Unit KF 30000 KF 15000 KF 7000
Capacity ton 30 15 7Width mm 830 830 700Length mm 1850 1,850 1,750Height mm 1400 1,340 1,200Min Height mm 320 320 260Max Height mm 1000 + 180 1000 + 180 900 + 180Air pressure kg 8~10 8~10 8~10Weight 463 336 241
Made in Korea
8. Welding Machine & Battery Tester
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
36
Made in Korea
SW 12000
• Washer (Ring) welding: Welding the washers to pull out the receded part of iron plate.
• Flat work welding: Smoothing out and extruded parts of iron plate.
• Automatic hammer
SPOT WELDING MACHINE
Features
ASW 3300
• Single sided weld on overlapped metals each other(The welding power of ASW 3300 is 0.8mm X 2 of metals).
• Double sided spot welding• Both-sided spot weld on overlapped metals ea
ch other.Metal Plate equipment such as production structure of
vehicles production industry changeApplication of vehicles• HYUNDAI MOTOR Company : SANTA FE, VERNA,
AVANTE, and other Vehicle• KIA MOTOR Company : PRIDE, LOTZE, CARENS,
GRAND CARNIVAL and other Vehicle• BENZ, BMW, AUDI, VOLKSWAGEN
Features
Specification
• Washer (Ring) welding: Welding the washers to pull out the receded part of iron plate.
• Flat work welding: Smoothing out and extruded parts of iron plate.
• Automatic hammer
SpecificationModel ASW 3300 SW12000
Input Voltage Single phase 200-230V, 50-60Hz, 3.3KVA 30A Single phase 200∼220V, 50∼60Hz, 12KVA
Output Voltage 3∼8V 2,800A 5∼8VValidity DC low voltage driving gear DC low voltage driving gear
Dimension 250ⅹ 320ⅹ220 mm 680 x 400 x 500mm
Weight 22.0kg 95.5kg
Input cable 8m 8m
Output cable 2.5m × 2 2.5m × 2
AccessoryWelding tip, Washer tip, Shrinking tip, Patching tip, Rapid puller and Slide hammer 1 pc each
Welding tip 2pcs and Earth tip, Washer tip, Flat work tip each Slide hammer 1pcs
SS 101
• Single sided weld on overlapped metals each other(The welding power of ASW 3300 is 0.8mm X 2 of metals).
• Double sided spot welding• Both-sided spot weld on overlapped metals ea
ch other.
AUTOMATIC SLIDE HAMMER
Metal Plate equipment such as production structure of vehicles production industry change
Application of vehicles• HYUNDAI MOTOR Company : SANTA FE, VERNA,
AVANTE, and other Vehicle• KIA MOTOR Company : PRIDE, LOTZE, CARENS,
GRAND CARNIVAL and other Vehicle• BENZ, BMW, AUDI, VOLKSWAGEN
Shape after Hemming works
HEMMING MACHINE
Features
Specification
KE 300
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Model SS-101The thickness of welding rod 5mm
The length of slide hammer 230mm
The length of cable 3m
Dimension 665 x 160 x 80
Weight about 5.8kg
Reference For using connect with spot welder
Metal Plate equipment such as production structure of vehicles production industry change
Application of vehicles• HYUNDAI MOTOR Company : SANTA FE, VERNA,
AVANTE, and other Vehicle• KIA MOTOR Company : PRIDE, LOTZE, CARENS,
GRAND CARNIVAL and other Vehicle• BENZ, BMW, AUDI, VOLKSWAGEN
Model KE 300Power AC 220 V, 50 / 60 HzPump 1 HP, 0.75 Kw 1PH, 3.6 cc / recMax. Pressure 100 kgf/Operating Pressure 15 ~ 40 kgf/Dimension 560 x 630 x 960 mm
Procedure of works
Features
Specification
Made in Korea
DBT 1000C
DIGITAL BATTERY TESTER
Specification
DBT 600
Model DBT1000C DBT600 BT 200Testing voltage DC 10~40V 12V DC 0~16V
BT 200
Features
Model DBT1000C DBT600 BT 200Testing voltage DC 10~40V 12V DC 0~16VApplicable capacity of battery 12V, 24V 30A ~ 600A 30~200A
Applicable contentsBattery Capacity, Life of span, Internal Resistance, CCA, AH, DIN, IEC, EN
Battery status, Condition of alternator & generator,Accidental short circuitry in wiring
Dimension 115 × 230 × 95mm 320 × 200 × 250mm 330 × 220 × 225mm
Weight 3.5kg 4.6kg 7Kg
• It can test formed voltage of generator. • It is used to check accidental short-circuit. • It is designed to simultaneously check the spe
cific gravity of battery liquid and starting capacity of automobile battery.
MAX 60D
Specification
DIGITAL BATTERY LOAD TEST AND QUICK CHARGER
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Model MAX 60D
Input Voltage Single phase 110/220V, 50/60Hz, 4.5KVA
Output Voltage DC 12/ 24V Rectification SCR typeDimension 260(W)ⅹ 450(L)ⅹ670(H)Weight about 58kgInsulation type A Type double insulation
Safety Devicev Overheating sensor, Automatic stop function
Main Power Code 2.5M / 2.5M
Remarks Change up to 8pcs auto battery of a passenger car
Made in Korea
9. Diesel Fuel Injection Pump Tester/ CRDI Rebuild System
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
39
Made in Korea
• Three ranges of pressure regulator, 0~2kg/and 0~6kg/, 0~50kg/ will provide more accurate pressure regulation.
• The solenoid coil of rotary type pump can be driven through the power supply of DC 12/24V inside of the test bench.
• The driving shaft and the driven shaft are connected with a clutch. while the driving motor keeps a certain speed, subsidiary action for test or maintenance can be done through clutch's ON-OFF function.
• The electrical breaker protects electric overload automatically.
• The fluorescent lamp behind the injector mount will give clear and accurate measurements of measuring cylinders.
• Injection pump mounting brackets consist of a plain bracket and a ring bracket.
• But any kind of injection pump can be attached through the combination of packing pieces and mounting ring.
DIESEL FUEL INJECTION PUMP TESTER
DND 103WFeatures• Three ranges of pressure regulator, 0~2kg/
and 0~6kg/, 0~50kg/ will provide more accurate pressure regulation.
• The solenoid coil of rotary type pump can be driven through the power supply of DC 12/24V inside of the test bench.
• The driving shaft and the driven shaft are connected with a clutch. while the driving motor keeps a certain speed, subsidiary action for test or maintenance can be done through clutch's ON-OFF function.
• The electrical breaker protects electric overload automatically.
• The fluorescent lamp behind the injector mount will give clear and accurate measurements of measuring cylinders.
• Injection pump mounting brackets consist of a plain bracket and a ring bracket.
• But any kind of injection pump can be attached through the combination of packing pieces and mounting ring.
Item Specification
Drive Motor AC 3ph 11KW (15 HP) 4 pole induction motor, 12 cylinders(Injectors) (Control by inverter)
Speed range 0 ~3600rpm, in both directionsPump Motor AC 3ph 0.75 KW (1 HP) 4 pole induction motor
PumpMax output pressure 50kg/(Working pressure: 25kg/)Max output flow 7.7ℓ/min Vane pump
Fuel Tank 45 liters working capacityTemperature control Variable from 0 ~ 60˚CHeater AC 1Ø 220V 1 KW PT 1” tank heaterSpeed control Manual / Auto (It can be operate 9 steps in auto mode)Glass 200cc and 45cc both sidesStroke Counter 0, 100, 200 ~ 1,000 / 0, 150, 250... 1,050 turnsRPM Counter 4 digit(0~9909) LED displayVM.VE(Rotary)Fuel control valve 0.5 ~1.5kg/ supply pressure controlLOW(PE. In-line)Fuel control valve 0.5 ~ 4kg/ supply pressure controlPE-A (In-line) pressure Gauge Ø 100 x 6 kg /VM. VE(Rotary) pressure gauge Ø 60 x 2 kg /
Specification
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
VM. VE(Rotary) pressure gauge Ø 60 x 2 kg /Transfer pressure gauge Ø 100 x 15 kg/High pressure gauge Ø60 x 50 kg/Governor pressure gauge -760 mmHG ~ +1100 mmHG Digital typeVacuum Regulator & Air Regulator (1 set) For Vacuum Regulator -760mm Hg Control(DN-103-W)
For Air Regulator 0 ~ 1100 mmHG Control(DN-103-W)
Air compressor Motor capacity AC3ph 220/380V 0.37kw(1/2HP)Compressor 1HP
Air tank Capacity 40 ℓPressure switch 10 kg/
Rack Scale 0 ~ 50mm with 0.05 mm(DN-103-W)Packing Dimension 1690 x 950 x1660Net weight 1,000kg Standard Main motor 11KW (15 HP) 12 cylinders : DND 103W7.5Kw ( 10HP) 10 cylinders : DNC 103W5.5Kw ( 7.5 HP) 8 cylinders : DNB 103W(By customer’s request, the capacity of main motor can be selected from 7.5 HP to 20HP)
Made in Korea
• Testing for injector injection quantity • Testing for injection figures • Testing for injector injection returns• Testing for various high pressure outputs
(Bosch, Delphi, Denso) • Testing for various common rail high pressure
input
Optional• All kinds of common rail simulation testing • Injector automatic cleaning during testing • Injector cleaning during vehicle engine starting
DNCRT 206SG
COMMON RAIL SYSTEM TEST BENCH DNCRT 206SGFeatures
ACCESSORIES
DNCRT 206WG
MODEL DNCRT 206SG DNCRT 206WGHigh Pressure pump drive motor
AC 220V/380V/3PH/50 (control by inverter) AC 220V/380V/3PH/50 (control by inverter)4 cylinders / 7.5KW (10 HP) 4 cylinders / 5.5KW (7.5 HP)
Low pressure pumpdrive motor
AC 220V/380V/3PH/50HZ 200W (1/3HP) AC 220V/380V/3PH/60HZ 200W (1/3HP)
Low pressure pump Output pressure 0~6 kg/cm² Max. output flow 7 ℓ / min
Output pressure 0~7 kg/cm² Max. output flow 7 ℓ / min
Fuel tank 20 ℓ (working capacity 15 liters) 20 ℓ (working capacity 15 liters)Temperature control
0 ~ 100 0 ~ 100
Measuring glass 150 cc (6 ea), 32cc (12 ea) - both sides 150 cc (6 ea), 32cc (12 ea) - both sidesStroke counter 0 ~ 1050 turns 0 ~ 1050 turnsEngine RPM 600 ~ 4,100 (600,650m,700 …4,100) Digit 600 ~ 4,100 (600,650m,700 …4,100) DigitHigh pressure pump RPM
0 ~ 3,000 (4 digit 0 ~9999 rpm indication) 0 ~ 4,000 (4 digit 0 ~9999 rpm indication)
Low pressure analog gauge
100 Ø 6 kg/cm² (Industrial precision stainless steel) 100 Ø 6 kg/cm²
Specification
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Low pressure analog gauge
100 Ø 6 kg/cm² (Industrial precision stainless steel) 100 Ø 6 kg/cm²
Low pressure regulator
0 ~ 6kg/cm² supply pressure control 0 ~ 6kg/cm² supply pressure control
High pressure digital type
0 ~ 2000 bar 100 Ø 2000 kg/cm²
High pressure regulator
0 ~ 2000 kg/cm²(2000 bar) pressure control 0 ~ 2000 kg/cm²(2000 bar) pressure control
High pressure pump output
measuring valve measuring valve
Fuel cooling device 400 x 400 (mm) 400 x 400 (mm)Fan for cooling (motor with 40W)
300 x 300 (mm) 30 Mierons
Fuel filter for line 30 Microns 0 ~ 60 min.Test zig attach bed 220 x 35 x 600 (WxDxH) -T groove type 220 x 35 x 600 (WxDxH) -T groove typePacking Dimension 1100x1100x1960 1100x1100x1960Net weight 500kg 500kg
Made in Korea
Diesel fuel injection pump tester + Common rail test bench function• Test for spray volume of injector• Test for spray form of injector• Test for return volume of sprayed volume by
injector• Test for flow volume of various high pressure
supply pump (Bosch, Delphi, Denso)• Test for various common rail high pressures• Simulation test for various common rails• Injector auto cleaning function while test
(optional)• Injector auto cleaning function while car engine
works
COMBINATION TESTER DNCRT 206VG FeaturesDNCRT 206VG
Specification
Item Specification
Drive Motor AC 3ph 11KW (15 HP) 4 pole induction motor, 12 cylinders(Injectors) (Control by inverter)
Speed range 0 ~3600rpm, in both directionsPump Motor AC 3ph 0.75 KW (1 HP) 4 pole induction motor
PumpMax output pressure 50kg/(Working pressure: 25kg/)Max output flow 7.7ℓ/min Vane pump
Fuel Tank 45 liters working capacityTemperature control Variable from 0 ~ 60˚CHeater AC 1Ø 220V 1 KW PT 1” tank heaterSpeed control Manual / Auto (It can be operate 9 steps in auto mode)Glass 200cc and 45cc both sidesStroke Counter 0, 100, 200 ~ 1,000 / 0, 150, 250... 1,050 turnsRPM Counter 4 digit(0~9909) LED displayVM.VE(Rotary)Fuel control valve 0.5 ~1.5kg/ supply pressure controlLOW(PE. In-line)Fuel control valve 0.5 ~ 4kg/ supply pressure controlPE-A (In-line) pressure Gauge Ø 100 x 6 kg /VM. VE(Rotary) pressure gauge Ø 60 x 2 kg /Transfer pressure gauge Ø 100 x 15 kg/High pressure gauge Ø60 x 50 kg/Governor pressure gauge -760 mmHG ~ +1100 mmHG Digital typeVacuum Regulator & Air Regulator (1 set) For Vacuum Regulator -760mm Hg Control(DN-103-W)
For Air Regulator 0 ~ 1100 mmHG Control(DN-103-W)
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Common rail pump mounting system
common rail controller
Diesel fuel injection pump tester
For Air Regulator 0 ~ 1100 mmHG Control(DN-103-W)
Air compressor Motor capacity AC3ph 220/380V 0.37kw(1/2HP)Compressor 1HP
Air tank Capacity 40 ℓPressure switch 10 kg/
Rack Scale 0 ~ 50mm with 0.05 mm(DN-103-W)Packing Dimension 1690 x 950 x1660Net weight 1,000kg
Made in Korea
• Testing injection form• Measuring injection amount• Measuring return amount
• Checking low pressure pump operation• Checking filter and fuel system• Checking injection pump operation• Checking the amount of injection back leak with static
and dynamic• Checking pressure control valve delivery pipe• Checking rail pressure sensor operation
COMMON RAIL INJECTOR UNIT TESTER
CRT 3000
Features
DNCRT 206SG
Features
• Testing injection form• Measuring injection amount• Measuring return amount
• Checking low pressure pump operation• Checking filter and fuel system• Checking injection pump operation• Checking the amount of injection back leak with static
and dynamic• Checking pressure control valve delivery pipe• Checking rail pressure sensor operation
• Tool case• Rail plus(For Delphi)• Rail plug(For Bosch)• Flask & Holder• Visible tube• Injection return adapter• Injection return hose plug• Clean case• Dust cap• High pressure gauge• Low pressure gauge
• Vacuum gauge• Gauge connection tube• Connection adapter with hose• Connection adapter• Fuel filter plug(For Delphi system)• Adapter connector(For Bosch)• Adapter connector for Delphi new• Adapter connector for Delphi old• Dummy resister• One year warranty• Repair Manual(English): 1S
Air pressure 4~7 barFuel pressure 0~700 barSize 600 x 600 x 800(H) mmPower 220V/ 1PH/ 50 or 60 Hz
SpecificationAccessory List
DNTP 203
P. T. PUMP TESTER DNTP 203
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Type P.T pump tester
Driving motor The regular electricpower 7.5 kw
The regular voltage 220 V, 3Ø,60Hz
The regular rotation 1750 rpm
Control inverterThe regular electricpower 7.5 kw
For R.P.Mcontrol
The regular voltage 220 V, 3ØThe regular frequency 0-200Hz
D.C 12V/24Vtranse Capacity 150 V
A For open &shut pump fuel
Voltage 220 VOutput of power DC 12V/24V
Made in Korea
Drive motor AC 3Ø 220V 5HP, 0-3000 RPMF/O pump motor AC 3Ø 220V 1.5KW 4P PUMP
CUMMINS INJECTOR TESTER DNGT 205
Specification
DNGT 205
F/O pump motor AC 3Ø 220V 1.5KW 4P PUMP F/O pump Max. out put pressure 70 kg/ cm², 7.5 ℓ/Min F/O tank capacity 38 ℓ F/O heater AC 1Ø 220V PT 1” 2.5KW L/O pump motor AC 3Ø 220V 0.4KW 4P, 7.5ℓ/Min. 16 kg/ cm² L/O tank capacity 32 ℓ L/O heater AC 1Ø 220V PT 1”? 1KW CAM BOX operating device Drive motor (CAM exchange type) Measuring cylinder 500 cc F/O cooling device Solenoid automatic F/O tank temperature controller PT 100Ω couple, 0-999 , 2 output controller L/O tank temperature controller PT 100Ω couple, 0-999 , 1 output controller F/O tank level alarm Alarm system L/O tank level alarm Alarm system Rotating meter Rotary encoder, 0 ~ 9999,Digital display, Standard 1050 RP
M Stroke meter 0 ~ 9999 button & indicator , Standard 50 stroke F/O supplying pressure gauge Ø110 x 15 kg/ cm² L/O supplying pressure gauge Ø110 x 15 kg/ cm² Dimensions (mm) 1300 x 805 x 1450 (h)
• For all kinds of diesel vehicle and agriculture machine’s nozzle testing.
• No shaking needle at measuring.• Providing various using adaptor.• Measure exact pressure • Due to perfect process, possible to use s
emi-permanently.• Easy to handle and use.
FeaturesNOZZLE TESTER
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
KE-1995
• For all kinds of diesel vehicle and agriculture machine’s nozzle testing.
• No shaking needle at measuring.• Providing various using adaptor.• Measure exact pressure • Due to perfect process, possible to use s
emi-permanently.• Easy to handle and use.
Model KE-1995Dimensions 200 X 140 X 420 mmWeight 5.5 kgFuel capacity Approx. 0.6 LitersInput measuring instrument
Max. 500 Kg / cm² , Min. 10Kg / cm²
Accessory As standard
Specification
Made in Korea
CRD1000• Free data input(9 channels of the memory
function) Injection pressure(1 bar unit), pulse(1 unit) the number of injection, rpm adjustment
• Max pressure 2000 BAR, set pressure 1500 BAR
• Perfect control of pull-in, hold in- current• Testing of Bosch, Delphi, Piezo, Denso Injector• Testing of pilot, main, and post injection• Visual inspection of the injection• Precise, graduated and led illuminated tubes
are used for efficient diagnosis of uneven flow rates for both discharged and returned volumes
• Testing of injector solenoid reluctance• Self-diagnosis function• Touch-screen of control box
CRD INJECTOR REBUILD SYSTEM CRD 1000FeaturesCRD 1000 CRD 2000CRD1000• Free data input(9 channels of the memory
function) Injection pressure(1 bar unit), pulse(1 unit) the number of injection, rpm adjustment
• Max pressure 2000 BAR, set pressure 1500 BAR
• Perfect control of pull-in, hold in- current• Testing of Bosch, Delphi, Piezo, Denso Injector• Testing of pilot, main, and post injection• Visual inspection of the injection• Precise, graduated and led illuminated tubes
are used for efficient diagnosis of uneven flow rates for both discharged and returned volumes
• Testing of injector solenoid reluctance• Self-diagnosis function• Touch-screen of control box
Model CRD 1000 CRD 2000Pulse signal Range 50 ~ 250 50 ~ 2500 mspressure range 1 ~ 1500 bar 1 ~ 1500 bar(Max 2000 bar)R.P.M range 500 ~ 6000 rpm 500 ~ 6000 rpmthe number of injection 0~50000 times LCD Touch Screeninput power (V) 200~240 V (using a power
transformer:100~120V)AC 220V
packing dimensions 55 X 60 X 80cm 755 X 840 X 870cmWeight(kg) 125kg 150kg
Specification
CRD2000• Support BOSCH, DELPHI CRDI injectors and
DENSO, SIEMENS PIEZO Injectors• Adjustable injection conditions: pilot injection,
main injection• Max Pressure 2000bar, • Setting control pressure 1500bar• Data input (10 channels of the memory function)• Adjustable rpm, injection time and pressure• Touch screen at the control box
Activating processChoose the relevant injector and touch the area you want to test. Operated by touch-screen display and by one touch input, It is convenient to use.
GASOLINE INJECTOR SPRAY TESTER & CLEANER 500
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
• It is to check the Gasoline ( Petrol ) Injector spray pattern and volume.
• Cleaning function to hollow section of injector by Cleaning solution
• Easy and simple operation • RMP ( Duty control ) adjustment function , control
from 800 rpm up to 2,000 rpm • Spray pressure control by air pressure, from 1 bar
up to 3 bar
Model 500
Electricity 220 volt / 50-60 Hz
Tank capacity 500 ml
Dimension 30 x 28 x 26 cm
Adapter available for most of car
500 Features
Specification
GASOLINE INJECTOR SPRAY TESTER & CLEANER 500
Made in Korea
10. Brake Lathe
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
46
Made in Korea
MOVABLE BRAKE LATHE
SpecificationKBL 3000
Model KBL 3000 KBL-3500
Motor 1/2HP, 110V/220V, 50/60Hz
1/2HP, 110V/220V, 50/60Hz
Motor RPM 120 120
Disk(rotor) size
Max diameter/ 390mmMax thickness/ 39mm
Max Diameter/ 390mmMax thickness/ 39mm
Dimension 700 x 700 x 1150 700 x 700 x 1,150Weight 75 kg 130 kg
KBL 3500
Lathe for disk
KBL 4300 STAR KBL 5000
KBL 3500
KBL 9000
KBL 3500
KBL 4300 STAR KBL 5000
Specification
Model KBL 4300 STAR KBL 5000 KBL 9000
KBL 9000
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
KBL 3500
Model KBL 4300 STAR KBL 5000 KBL 9000
Motor 1HP, 220/380V, 50/60Hz 1HP, 220/380V, 50/60Hz 3HP, 380V, 3PH
Motor RPM 110 RPM 0~120(inverter system) 140 RPM
Disk(rotor) sizeMax dia. 420 Max dia./600mm Max dia. 670
Max thickness 50 Max thickness/50mm Max thickness 70
Drum sizeMax dia. 590 Max dia./1,000mm Max dia. 210~1,050
Max thickness 140 Max depth/360mm Max thickness 500
Dimension 800 x 580 x 1,050 850 x 950 x 1,350 3000 (L)x2,365(H)Machine net weight 280kg 550kg 1,700kg
Made in Korea
11. Vehicle Diagnosis equipment
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
48
Made in Korea
Model KEB 3000 KEB 10000 KEB 15000Max. weight (kgf) 3,000 10,000 15,000Max. Breaking force (kgf) 1,500 5,000 10,000
RollerDia (Ø) X Length(mm) 104 x 850 470 x 2,880 470 x 2,880
Revolution RPM 9 8 8
Cylinder
Dia (Ø) x Stroke 150 x110 255 x 118 300 x 110Q'ty 2 EA 2 2Air pressure(kgf/) 6 8 8
Detecting method LOAD CELL LOAD CELL LOAD CELL
Motor capacity 220~380V/3PH/50HZ, 0.75KW x 2
220~380V/3PH/50HZ, 2.2KW x 2
220~380V/3PH/50HZ, 2.2KW x 2
Dimensions (L x W x H) (mm)
3,260 x750 x 470
4,000 x 810 x610
4,000 x 810 x670
ROLLER BRAKE TESTER
SpecificationKEB 3000
ALIGNMENT SIDE-SLIP TESTER
KEA 3000
Model KEA - 3000 KEA 10000 KEA 15000
Maximum axle
weight(kg)3,000 10,000 15,000
Plate (Length X Width)
mm750 X 500 mm 750 x 500 750 x 1,000
Measurable range IN/OUT 0.0-10.0 m/Km
Measuring type Potentiometer
Indication F.N.D alarm & Lamp
Dimension (LxW) mm 2,380 x 610 x 150 3,180 x 610 x 160 3,210 x 850 x 850
Power supply AC 220V/1ph/50Hz
KES 3000
ALIGNMENT SIDE-SLIP TESTER
SPEED METER
Specification
Specification
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
KES 3000MODEL KES3000 KES10000 KES15000MAX. WEIGHT(kg) 3,000 10,000 15,000MEASURINGRANGE 0 ~ 120 km /h 0 ~ 120 km /h 0 ~ 120 km /h
RollerDia (Ø) X Length(mm)
Ø 185 x 850 Ø 185 x 1,200 Ø 185 x 1,200
MEASURINGSPEED 40 km/h 40 km/h 40 km/h
Cylinder
D x stroke Ø150x110 mm Ø255x110 mm Ø 300 x 110 mmQ'ty 2 EA 2 EA 2 EAAirpressure 6 Bar 6 Bar 6 Bar
DETECTINGMETHOD Encoder
DIEMENSION (mm) 2,575x800x470POWER SUPPLY AC 220 V / 1ph / 50 Hz
Specification
Made in Korea
Manual type display for side slip tester, speed meter, brake tester : Manual type can read the value but it can’t save the data and can’t be printed out.
Automatic display : It can connected pc and displayed values as follows.
ABS MEASURING UNIT
CON 10 Manual
CON 10A Auto
Features
Automatic display : It can connected pc and displayed values as follows.
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Made in Korea
• This tester detects the intensity and beam of headlight(UP/DOWN & L/R)
• Ease to use and operate.
Model KEH-3000SMeasured Distance 3,000mmMeasured Intensity of Light 0~80,000cd
Measured Angle Up 10~0 Down 20Left 20~0 Right 20
KEH-3000S
HEAD LIGHT TESTER KEH-3000S
Specification
Features
Measured Angle Left 20~0 Right 20Measured Type Screen Reflection TypeDetected Method PhotocellMeasured Height 500~1,300mmSize of Body 1530×700×640
SPCT 100
Model SPCT-100Input voltage Single phase 220V
Specification
• It can completely remove carbon from spark plug owing to blows the minute abrasive particle by high pressure air.
• It can check the ignition of spark plug have their best conditions.
• It can also automatically clean the spark plug.
Features
SPARK PLUG TESTER SPCT 100
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Frequency 50∼60HzThe working pressure of air 7 ∼ 10KG/
The quantity of sand for working 350g
The particle of sand 60#The voltage of tester when spark testing 15,000V
Dimension 490(W)× 280(L)× 265(H)
Weight 9.3KG
Accessory
Adapter for plug 12mm, 14mm each 2pcsAdapter case 1pcs, Spare sand 350g
Made in Korea
ENGINE OIL ARMATURE TESTER
SpecificationFeatures
CCK 201
Specification
Features
SPARK PLUG TESTER
AT 11
• It can check whether armature's core, armature's coil, and commucator is regularly insulated through testing armature earth.
• It can check the short circuit of armature core's intervals.
• It can check whether the segments of circuit broke by using the test leader.
• It can test the armature with ampere meter.
Model AT11Input voltage Single phase 220VFrequency 50∼60HzAC Ampere 2A
• It can measure camber angle. • It can measure kingpin caster angle.• It can measure kingpin inclination.
Model CCK 201Checking range for king-pin 0° ~ 14°Checking range for camber -5°~+5°Checking range for caster -3° ~ 0 ° ~ 10°
Features
Features
• It can check whether armature's core, armature's coil, and commucator is regularly insulated through testing armature earth.
• It can check the short circuit of armature core's intervals.
• It can check whether the segments of circuit broke by using the test leader.
• It can test the armature with ampere meter.
AC Ampere 2AChecking voltage 24VApplicable checking range 40∼120ψWeight 8KgDimension 360 × 230 × 280
• It can measure camber angle. • It can measure kingpin caster angle.• It can measure kingpin inclination.
Checking range for caster -3° ~ 0 ° ~ 10°Weight 1.4Kg
Dimension 275(W)× 165(L)× 150(H)
The inside diameter of strong round magnet 47 mm
• It can measure kingpin caster angle.
CCT 601
WHEEL GAUGE
Features Features
TRG 45
• This turn table will indicate an exact angle when the steering gear has been turned around.
• It is enough to measure from passenger car to small truck.
• The measurement angle is from 0°to 45°.
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Features
Features
• It can check whether armature's core, armature's coil, and commucator is regularly insulated through testing armature earth.
• It can check the short circuit of armature core's intervals.
• It can check whether the segments of circuit broke by using the test leader.
• It can test the armature with ampere meter.
• It can measure camber angle. • It can measure kingpin caster angle.• It can measure kingpin inclination.
• It can measure kingpin caster angle.
Model CCT 601The Wheel application 13" ~ 16"Weight 2.85KgDimension 365 × 210× 105
Specification
• This turn table will indicate an exact angle when the steering gear has been turned around.
• It is enough to measure from passenger car to small truck.
• The measurement angle is from 0°to 45°.
Model TRG 45
Purpose From a passenger car to small sized truck
Measuring angle 0°∼ 45°Dimension 360 × 430× 65 mmWeight 32Kg2pcs are 1set Made a special steel plate
Specification
Made in Korea
Easy and accurate Automatic Tire inflator
Automatic Tire Inflator mounted with an advanced sensor and micro processor, provides a simple, safe and accurate way to inflate and maintain your tire at its recommended pressure. As the tire pressure reached the preset level the inflator shuts off airflow into the tire automatically and it sounds the alarm.• Convenient 6 frequently used tire air pressure
preset button • Accurate tire air pressure control. • Easy for every one. It controlled by digital
way. • Good for the Self car wash booth not only for
a maintenance shop • Good shape and various colors
(Orange/Blue/Black)
300A
500A
TIRE INFLATOR
Features
Automatic Tire Inflator mounted with an advanced sensor and micro processor, provides a simple, safe and accurate way to inflate and maintain your tire at its recommended pressure. As the tire pressure reached the preset level the inflator shuts off airflow into the tire automatically and it sounds the alarm.• Convenient 6 frequently used tire air pressure
preset button • Accurate tire air pressure control. • Easy for every one. It controlled by digital
way. • Good for the Self car wash booth not only for
a maintenance shop • Good shape and various colors
(Orange/Blue/Black)
Model 300A 500APower supply AC 220V 50/60HzSupply air pressure 7~10kgf/
Capacity 150 PsiInitial setting pressure 1 Psi
Machine dimension 0.1kgf/
Dimension 365 X 300 X 108 300 X 300 x 1607
Weight 2.8 kg 30 kg
Specification
MA 99/ MA160
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Model Small(MA 99) Large(MA 160)Operating principle Auto control method by AIR MASTER PROCESSORDisplay and setting pressure 10 ~ 100 PSI 10 ~ 160 PSISupply air pressure 5.6 ~ 7.0kg/ 10~13kg/Initial setting pressure 30 PSI 32 PSIAccuracy ±1 PSIPressure display equipment 3-Digit display method FNDAlarm system Buzzer ( 80db at 1m,)
Operation environment -10 ~ 50 (14~122)(W/O Heater) 0~95% RH (Condition without freezing)
Power consumption 10WDimensions W270xH370xD100mm W320xH420xD140mmMain body's weight 3.0kg 6kgPower supply 220v / 60Hz
Standard component Main bodyAir injection hosex10M(house)+nozzle(Air Chuck)
Specification
Made in Korea
12. Gas analyzer & Diesel Smoke tester
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
54
Made in Korea
• Outstanding accuracy, stability and durability • NOx measurement upgradable(option) • Temporary pause to measurement(Hold
function)• Portable(compact size, light weight) • Extra filters and printer paper • Compatible with chassis dynamo and engine
tune-up • Durable Performance that has passed a severe
cold test at -10 • Automatic Temperature Adjustment (2~8 min) • 6 LED Display Windows • (CO, HC, CO2, O2, λ, NOX), • Built-In Printer • Name and Phone Number Memory Option• Time and Date Display Option when using
printer • RS232 PC Program (optional) • Suitable for professional engine tune-ups• Suitable for professional auto smoke testing
shops
KEG 500
5 GAS ANALYZER KEG500 (4 Gas, 5 Gas) KEG200(2Gas)
Features KEG500KEG 200
• Portable (compact size, light weight) • Outstanding accuracy, stability and durability • Response time of less than 10 seconds • Stand-by for low power consumption when unit
is not in use • Automatic adjustment of warming-up time (2-
8minutes.) • Tow LED indicators • Extra filters and printer paper • Elegant and simple appearance
Features KEG200
• Outstanding accuracy, stability and durability • NOx measurement upgradable(option) • Temporary pause to measurement(Hold
function)• Portable(compact size, light weight) • Extra filters and printer paper • Compatible with chassis dynamo and engine
tune-up • Durable Performance that has passed a severe
cold test at -10 • Automatic Temperature Adjustment (2~8 min) • 6 LED Display Windows • (CO, HC, CO2, O2, λ, NOX), • Built-In Printer • Name and Phone Number Memory Option• Time and Date Display Option when using
printer • RS232 PC Program (optional) • Suitable for professional engine tune-ups• Suitable for professional auto smoke testing
shops
Model KEG500
Measuring gas CO, HC, CO2, O2, (air surplus rate), AFR, NOX (optional)
Sensor TheoryCO, HC, CO2, Non-Dispersive Infrared Analysis(NDIR) O2, NOx: Electrochemical Cell CO HC CO2
Measuring range 0.00 ~ 9.99%
0 ~ 9999 ppm
0.0 ~ 20.0%
Resolution 0.01% 1 ppm 0.1%
O2 λ AFR NOX
Measuring range 0.00 ~ 25.00 %
0 ~ 2.000 rpm 0.0~99.0 0 ~ 5,000
rpmResolution 0.01 % 0.001 0.1 1ppmDisplay 4 digit 7segment LED
Specification
• Portable (compact size, light weight) • Outstanding accuracy, stability and durability • Response time of less than 10 seconds • Stand-by for low power consumption when unit
is not in use • Automatic adjustment of warming-up time (2-
8minutes.) • Tow LED indicators • Extra filters and printer paper • Elegant and simple appearance
Model KEG200Measuring item CO, HCMeasuring method CO, HC : NDIR
CO HCMeasuring range 0.00 ~ 9.99% 0 ~ 9999 ppmResolution 0.01% 1 ppm
Display 4 digit 7segment LED
4 digit 7segment LED
Display 4 digit 7segment LED
4 digit 7segment LED
Repeatability Less than 2% FS
Response time Within 10 seconds (more than 90%)
Warming up time
About 2 ~ 8 minutes
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Display 4 digit 7segment LED Repetition Rate Less than 2% FS Response time Within 10 seconds (90% of the time) Preheat Time Approx. 2~8 minutes Flow rate 4 ~ 6 L/min Power AC110V or AC220V 10%, 50/60Hz Power consumption Approx. 50W
Operation Temp 0 ~ 40ºC
Dimensions 285 (W) x 410 (D) x 155 (H) mm Net Weight Approx. 4.5 kg
Included Accessories
Probe, Probe hose, Spare fuse, Leak test cap, Spare filter, Operation manual, Power cord, Ground cable, Calibration controller nipple, Calibration connecting hose
Options Printer, Printer paper, PC program, Communication cable
Warming up time
About 2 ~ 8 minutes
Flow rate 4 ~ 6 L/min
Power AC110V or AC220V 10%, 50/60Hz
Power consumption
About 50 W
Operation Temp 0 ~ 40
Dimensions 410 X 285 X 155 mm Packing size 530 X 400 X 350 mmWeight About 4.5 kg
Basic accessories
Probe, Probe hose, Spare fuse, Leak test cap, Spare filter, Operation manual, Power cord, Ground cable, Calibration controller nipple, Calibration connecting hose
Made in Korea
• Real-time smoke measurement(%, k [m-1]) • Portable and LED display• Outstanding accuracy, stability and durability• Response time of 0.5 second• Smoke, SOF measurement• Easy to use with handheld terminal(option) • Built-in printer(option)• RS232C PC program • RPM/ Oil temp. meter(option)• Auto-Zero/ Span calibration function
OP 201
DIESEL OPACITY SMOKE METER OP 201
Features
Installation and measurement OP 201• Single unit of the analyzer covers the display
and the printing of measured value that are recorded in its main body, and can be easily hand-carried.
• No more than one tester operator behind the wheel would be enough to conduct the free acceleration test to obtain the measured value stepping on the accelerator and using wired or wireless handheld terminal.
• In supply of diversified basic PC software:PC program are provided in the way to cover regulations from various countries and also ramified for users’ purposes such as governmental agency’s use, inspection or repair of vehicle.
Measuring items Smoke opacity ( %, k [m-1] ) RPM (option), °C (option)
Principle Light extinction method (Partial-flow sampling type)Light source Green LED(565nm)Detector Photo diodeRange 0.0~100.0% (0.00~21.42m-1 )Accuracy Less than 1% Warm-up time 3~6 minutes
Specification
Installation and measurement OP 201• Single unit of the analyzer covers the display
and the printing of measured value that are recorded in its main body, and can be easily hand-carried.
• No more than one tester operator behind the wheel would be enough to conduct the free acceleration test to obtain the measured value stepping on the accelerator and using wired or wireless handheld terminal.
• In supply of diversified basic PC software:PC program are provided in the way to cover regulations from various countries and also ramified for users’ purposes such as governmental agency’s use, inspection or repair of vehicle.
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Accuracy Less than 1% Warm-up time 3~6 minutesDisplay time 4 times /secPower 220V / 110V AC 50/60HzTemperature -10~40Dimension 450(W) x 200(D) x 245(425)(H) mm Weight Approx. 7kg
Option RPM/ Oil temp. meter ,Handheld terminal,Built-in printer , Standard filter, PC program
Made in Korea
Model DS2000
Smoke sampling Air cylinderSampling Volume 330 ±15ccDisplay digital display Testing method standard contamination paper Measurement range 0.0~100 %
• Semi-permanent life time • Indication of the value in decimal point
to enhance the accuracy• Rapid and accurate service system
provided to realize the best service, regardless of service period
DS2000
DISEL SMOKE TESTER
Features
Specification
Measurement range 0.0~100 %Degree of indication Max, indication 2% Min, Scale Value 0.1% (1/1000)Power supply AC 220V / 50~60 Hz Dimension 330 x 360 x 370(mm)Packing dimension 360 x 380 x 380(mm)Net weight (Gross weight) 15 kg (18 kg )
DS2001
Model DS2001Principle Reflection photometryApplication gas Black smoke from diesel engine exhaust
Construction Sampling, measuring, display purging and print out
Purging Automatic by pass system an external compressed air
Compressed air pressure 2~3kg/cm2
Indication method LED-displayPrinter External printer
Filter paper Width 40mmLength 50m/roll
AUTO SMOKE TESTERSpecification
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Width 40mmLength 50m/roll
Sampling probe & HoseChrome plated steel probe with universal clampingDevice and sampling hose
Blackness value 0~100%, Resolution 0.1%Accuracy ±2% on max. scaleSuction volume 330cc ± 15cc
Soot spot area Ø32 ± 0.3mm(It depends on each country’s regulation)
Calibration Manual by adjustable dialStability Within 2% in the measuring Sampling Time 1.4 ± 0.2 secondsPower supply AC 220V/ 50~60Hz / 1PHPower consumption 50WOperating temp -10ºC ~50ºCSerial I/O RS 232.9 pinDimensions 420 x 250 x 400 mmWeight Approx. 20kgOptional External printer, Mobile stand, Heater
Made in Korea
13. Car Mat Washer
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
58
Made in Korea
KM 200
• General sponge roller type
CAR MAT WASHER
KM 300A
• Air Blower Type
Features
• Full automatic operation. • Structure- All stainless steel built body and frames trust fee and durable• Multi -cleaning functions - Perfect washing and consistent dry by air blower (After washing,
able to use it immediately.) After watering, washed by brush and dry by strong air blower.• It can be operated without water, so there is not any odor.• Anti-freezing - Due to air blower dry system, do not need any device. Do not need water in
winter during washing.• Washing and drying in one cycle.• Time saving - cleans 5 rugs in 3 minutes• Prevent mat rolling and frequent mechanical trouble.• Simple structure - Strong durability. • No frequent mechanical problem.(Easy maintenance)
Optional• Perfume, disinfection and deodorization function • Coin system available
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Model KM200 KM300AElectric requirement 220V, Single phase, 50 Hz/ 60Hz ±220 V, Single phase, 50 HzElectric motor (1/2 HP motor) 115V, Single phase, 60Hz (Blast motor) 220 V, Single phase, 50 HzMax mat width 800 mm 700mmSteel material 1.2 T ~ 2/5 T SUS 1.2 T ~ 2/5 T SUSWashing Time 5 sec/unit(Mat size 600 x 800 mm) 5 sec/unit(Mat size 600 x 800 mm)Dimension 530 x 1,000 x 1200 mm 1,000 x 600 x 1,060 mmPacking size 760 x 1,110 x 1,360 mmWeight(Net) 150 kg 190 kg
Specification
• Full automatic operation. • Structure- All stainless steel built body and frames trust fee and durable• Multi -cleaning functions - Perfect washing and consistent dry by air blower (After washing,
able to use it immediately.) After watering, washed by brush and dry by strong air blower.• It can be operated without water, so there is not any odor.• Anti-freezing - Due to air blower dry system, do not need any device. Do not need water in
winter during washing.• Washing and drying in one cycle.• Time saving - cleans 5 rugs in 3 minutes• Prevent mat rolling and frequent mechanical trouble.• Simple structure - Strong durability. • No frequent mechanical problem.(Easy maintenance)
Optional• Perfume, disinfection and deodorization function • Coin system available
Made in Korea
14. Steam Cleaner
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
60
Made in Korea
Model KBJ-202M KBJ-207P2(with 2 spray guns) KBJ-104E
KBJ-202EB(Type: Economy, Deluxe)
KBJ-202M
STEAM CAR WASHER
Specification
KBJ-202EBKBJ-104EKBJ-207P2
2. Electric type1. Fuel type: Diesel, Kerosene
Model KBJ-202M KBJ-207P2(with 2 spray guns) KBJ-104E
KBJ-202EB(Type: Economy, Deluxe)
Power 220V , 50/ 60HZ, 220V , 50/ 60HZ, 220V , 50/ 60HZ, 220V , 50/ 60HZ,Power consumption 0.25 Kw 0.19KW 1phase 3KW 5 KWFuel Kerosene/Diesel Kerosene/Diesel 150~300 cc/min
Tank capacity Water: 14 ℓOil : 9 ℓ
Water : 20 litOil: 17lit Water : 8 lit Water : 24 lit
Steam pressure 8~15 kg/cm2 8~12 kg/cm2 7 ~12 kg/cm2 8~15 kg/cm2Steam temperature 85~95 70~130 70~125 85~95Steam hose length 10 m 10 m 10 m 10 mDimension 425 x 725x 700 498x 858x 800mm 300x 460x 470 425 x 725x 700Material Stainless steel Stainless steel Stainless steel Stainless steelWeight 85 kg 122 kg 20kg 85 kg
GUM REMOVER 207
GUM REMOVER 207
Applications fields
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Model GUM REMOVER 207Power 220V / 60HZ,Power Consumption 1.5kwFuel Kerosene / DieselTank Capacity 8~15 kg/cm2Water 85~95Steam hose length 10 mSteam Pressure 8~10k/Steam Hose 3.5mDimensions 710 X 1150 X 1000
Specification
Made in Korea
15. Lubricant Equipment
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
62
Made in Korea
OIL HOSE REEL EOR-610/ 910/ 1310
Features
Specification
CRD 1000
Features
Specification
CRD 1000
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Features
Specification
CRD 1000
Made in Korea
OIL HOSE REEL RHA
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Made in Korea
Various kinds of industrial reels such as Hose reel, cable reel, air hose reel, water hose reel, cord reel and crane reel with advanced technology, high quality, and convenient customer service .
AIR HOSE REEL
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.
Made in Korea
It is consist with Oil pump (347100) with 5 m hose + oil meter gun (365 603) + regulator + trolley .
OIL DISPENSER WITH 200 LITERS
Features
The manufacture reserves the right to change the product specifications without notice and liability in order to upgrade the quality.