RTP/RTPDR-series Two Stage Radial Split Pump

ISO13709API610

CS 1330E D

www.hsgoodsprings.com

HEAD OFFICE 254-8, Gongdeok-Dong, Mapo-Gu, Seoul, Korea 121-710 TEL : 82-2-3279-8310CHANGWON PLANT 43-1, Ungnam-Dong, Changwon-Si, Kyungsangnam-Do, Korea 641-290 TEL : 82-55-268-8976

This brochure does not contain all informations and any warranty or guarantee of any kind.Also, all informations herein is subject to change without notice.

High EfficiencyEquipment

ISO 9001 ISO14001 OHSAS 18001

KOSHA18001

Springs of Living Water

General(RTP)General

2 I 3 RTP/RTPD

Applications- Power Generation Boiler Feed- Oil and Gas Refinery- Petrochemical Industries- Other Chemical- General Industries

HYOSUNG GOODSPRINGS MODEL RTP and RTPD API610 BB2 Type Pump,Two stage radial split pump Model RTP denotes single suction impeller type.Model RTPD denotes double suction impeller type.

RTP/ RTPD

RatingCapacity To 5500 m3/hr (6600 USGPM)Heads To 520 m (1700ft)

Maximum working pressure Consistent with the pressure ratings of ANSI 300 flangesHigh pressure ratings are available

Rotation Clockwise (viewed from inboard side)Impeller type EnclosedTemperatures -100 °C to 450 °C (-150 °F to 850 °F)Nozzles Top-TopFlanges ANSI 300 as standardShaft sealing Suitable for mechanical seal and conventional packing

Materials

Construction

Features- Pump is heavy duty design with centerline support- Designed in accordance with API 610, ISO 13709 specifications- Compact design applicable for wide range of liquids- Interchangibility is maintained for all components of the pump- Low NPSH performance

Part NameMaterials JIS/ASTM-AISI

C.Steel C.Steel 12% Cr.Steel 304 S.Steel 316 S.SteelCasing SCPH2/A216WCB SCPL1/A352LCB SCS1/A743CA6NM SCS13A/A743CF8 SCS14A/A743CF8M

Impeller 1st STG SCS1/A743CA6NM SCS13A/A743CF8 SCS1/A743CA6NM SCS13A/A743CF8 SCS14A/A743CF8M

Impeller 2nd STG SCS1/A743CA6NM SCS13A/A743CF8 SCS1/A743CA6NM SCS13A/A743CF8 SCS14A/A743CF8M

Impeller Wear Ring SUS420/AISI420 SUS304/AISI304 SUS420/AISI420 SUS304/AISI304 SUS16/AISI316

Shaft SCM440/AISI4140 SUS304/AISI304 SUS420/AISI420 SUS304/AISI304 SUS16/AISI316

Case Wear Ring SUS420/AISI420 SUS304/AISI304 SUS420/AISI420 SUS304/AISI304 SUS16/AISI316

Sleeve for Packing SUS420/AISI420 SUS304/AISI304 SUS420/AISI420 SUS304/AISI304 SUS16/AISI316

Sleev for M.Seal SUS420/AISI420 SUS304/AISI304 SUS420/AISI420 SUS304/AISI304 SUS16/AISI316

Bearings protected bylabyrinth type

deflectors

Casing-Extra heavy mounting feet forminimum distortion under 2 times API nozzle loads and centerline

support construction reduces thethermal effects

Low NPSH 1st stageimpeller.

Thrust bearing-anti-friction and sleeve or thrust tilting pad.

Radial bearing-sleeve or anti-friction.

Impellers areenclosed and

dynamically balancedfor improved efficiency

and reliability

API 682 Sealchambers-outside

driven, API 682Catridge type

mechanical seal

Designation

RTP 100 420

Model Norminal Discharge Dia (mm)

ImpellerDiameter (mm)

Selection ChartGeneral(RTPD)

4 I 5 RTP/RTPD

Materials

Construction

Features- Pump is heavy duty design with centerline support- Designed in accordance with API 610, ISO 13709 specifications- Compact design applicable for wide range of liquids- Interchangibility is maintained for all components of the pump- Low NPSH performance

Part NameMaterials ASTM-AISI/ JIS

C.Steel C.Steel 12% Cr.Steel 304 S.Steel 316 S.SteelCasing SCPH2/A216WCB SCPL1/A352LCB SCS1/A743CA6NM SCS13A/A743CF8 SCS14A/A743CF8M

Impeller 1st STG SCS1/A743CA6NM SCS13A/A743CF8 SCS1/A743CA6NM SCS13A/A743CF8 SCS14A/A743CF8M

Impeller 2nd STG SCS1/A743CA6NM SCS13A/A743CF8 SCS1/A743CA6NM SCS13A/A743CF8 SCS14A/A743CF8M

Impeller Wear Ring SUS420/AISI420 SUS304/AISI304 SUS420/AISI420 SUS304/AISI304 SUS16/AISI316

Shaft SCM440/AISI4140 SUS304/AISI304 SUS420/AISI420 SUS304/AISI304 SUS16/AISI316

Case Wear Ring SUS420/AISI420 SUS304/AISI304 SUS420/AISI420 SUS304/AISI304 SUS16/AISI316

Sleeve for Packing SUS420/AISI420 SUS304/AISI304 SUS420/AISI420 SUS304/AISI304 SUS16/AISI316

Sleev for M.Seal SUS420/AISI420 SUS304/AISI304 SUS420/AISI420 SUS304/AISI304 SUS16/AISI316

Bearings protected bylabyrinth type

deflectors

Casing-Extra heavy mounting feet forminimum distortion under 2 times APInozzle loads and centerline support

construction reduces the thermal effects

Low NPSH 1st stageimpeller.

Double Suction design

Thrust bearing-anti-friction and sleeve orthrust tilting pad.

Radial bearing-sleeve or anti-friction.

Impellers are enclosedand dynamically

balanced for improvedefficiency and reliability

API 682 Sealchambers-outside

driven, API 682Catridge type

mechanical seal

RTP80-400RTP80-400

RTP50-330RTP50-330RTP50-330RTP80-360

RTP80-400

ModelRTP

ModelRTPD

Performance ranges shown on these charts are for preliminary selection only.

50Hz

Outline DimensionsSelection Chart

6 I 7 RTP/RTPD

ModelRTP

ModelRTPD

Performance ranges shown on these charts are for preliminary selection only.

60Hz

Note : Dimensions are in mm and for guidance only.Certified drawings will be provided in all cases of actual construction. Motor dimensions are approximate.The listed dimensions apply to roller/ball (ball/ball) bearing designs with the exception that the dimensions of 150 ×100 RTPD 45, 250 ×150 RTPD 45, 250 ×200 RTPD 70 and 300 ×250 RTPD 70 are for sleeve/ball bearing designs.

PUMP SIZEPUMP AND MOTOR (mm) BASE(mm) APPROX WEIGHT(kg)

P1 P2 P3 P4 P5 H1 H2 H4 X ML LA R A BL BW PUMP BASE

RTP50-330 538 130 585 140 165 300 630 300 250 996 2499 950 290 2020 870 700 550

RTP80-360 567 160 634 140 190 320 590 320 250 1619 3230 1050 310 2525 1000 980 620

RTP80-400 535 145 613 200 220 340 680 340 250 1618 3161 1050 330 2550 1000 1100 640

RTP100-420 583 185 670 220 225 360 720 360 280 1509 3227 1100 330 2640 1040 1200 750

RTPD100-450 649 205 672 185 260 427 760 427 280 1509 3315 1200 350 2680 1200 1700 850

RTPD150-440 665 230 797 230 250 370 780 370 300 1509 3501 1420 380 2880 1140 1300 880

RTPD150-450 778 275 779 240 280 480 840 480 300 1774 3906 1500 410 3200 1400 1800 1280

RTPD200-700 916 305 925 245 400 640 1040 640 320 1764 4230 1500 450 3480 1580 2250 1300

PUMP SIZE P1 P2 P3 P6 P5 H1 H2 H5 X ML LA R A BL BW PUMP BASE

RTPD250-700 963 330 1000 30 425 600 1190 1000 350 2385 5028 2000 470 4200 1800 2500 2200

VIEW FROM A

Unit (mm)