ksu smartgrant - kennesaw state university · page 10 of 31 searching for a principal investigator...

KSU SmartGrant Guide for Principal Investigators:

Creating a Proposal

Training, Outreach, Learning Technologies & Video Production

University Information Technology Services

Copyright © 2015 KSU Division of University Information Technology Services

This document may be downloaded, printed, or copied for educational use without further permission

of the University Information Technology Services Division (UITS), provided the content is not modified

and this statement is not removed. Any use not stated above requires the written consent of the UITS

Division. The distribution of a copy of this document via the Internet or other electronic medium

without the written permission of the KSU - UITS Division is expressly prohibited.

Published by Kennesaw State University – UITS 2015

The publisher makes no warranties as to the accuracy of the material contained in this document and

therefore is not responsible for any damages or liabilities incurred from UITS use.

Smart Grant is a registered trademark of ERA Software Systems, Inc.

University Information Technology Services

KSU SmartGrant

Guide for Principal Investigators: Creating a Proposal

Table of Contents Introduction ................................................................................................................................................ 4

Learning Objectives ..................................................................................................................................... 4

Logging into KSU SmartGrant ..................................................................................................................... 5

Creating a New Proposal ............................................................................................................................. 7

Navigating to a New Proposal ................................................................................................................. 7

Step 1: Proposal Preliminary Info ........................................................................................................... 8

Selecting the Sponsor ......................................................................................................................... 9

Searching for a Principal Investigator ............................................................................................... 10

Departments and Percent Credit ...................................................................................................... 10

Updating (Saving) your Proposal ...................................................................................................... 11

Completing the Intro Proposal Data ..................................................................................................... 12

Additional Information Tab ............................................................................................................... 12

Classification Tab .............................................................................................................................. 12

Site Specific Data Tab ........................................................................................................................ 13

Grants.gov Submission ...................................................................................................................... 14

Update the Proposal ............................................................................................................................. 14

Step 2: Budget Preliminary Information ............................................................................................... 15

Step 3: Budget Detail ............................................................................................................................ 17

Personnel Cost .................................................................................................................................. 17

Non-Personnel Cost .......................................................................................................................... 20

Updating your Budget for Period 1 ................................................................................................... 22

Replicating your Budget for Other Budget Periods .............................................................................. 23

Editing the Copied Budget Period ......................................................................................................... 24

Step 4: Generating Forms ..................................................................................................................... 25

Step 5: Routing your Proposal for Approval ......................................................................................... 28

Exiting your Proposal ............................................................................................................................ 30

Accessing an In-Progress Proposal ............................................................................................................ 30

Last Accessed Proposal ......................................................................................................................... 30

Get Proposal by GPID ............................................................................................................................ 30

Browse to a Proposal ............................................................................................................................ 31

Revised 11/2/2015 of 31

Introduction The SmartGrant system is KSU’s Grants Management System. It is a web-based system used to create,

track, and submit your grant proposals to sponsors.

The SmartGrant system can be accessed from a PC or a Mac, in any of the major web browsers

(Internet Explorer, Firefox, Safari, or Chrome).

Learning Objectives This booklet covers the following topics:

1. Logging into the SmartGrant System

2. Creating a new proposal, including:

a. Introductory Proposal Data

b. Budget

c. Generating forms

3. Initiating routing for approval from your department chair, dean, and the Office of Research

4. Accessing an in-progress proposal

of 31

Logging into KSU SmartGrant

1. Navigate your web browser to https://smartgrant.kennesaw.edu/

2. Click Continue on the SmarGrant page (see Figure 1).

Figure 1 - SmartGrant page

3. On the User Login screen, type your KSU NetID and your Password (see Figure 2).

Figure 2 - User Login

4. Click the Submit button.

https://smartgrant.kennesaw.edu/

of 31

5. If prompted to select an institution, choose Kennesaw State University Research and Service

Foundation (see Figure 3).

Figure 3 - Selecting an institution

You are now logged into KSU SmartGrants. From the main page on the left side of the page, you can

navigate to the functions related to proposals (see Figure 4).

Figure 4 - Main Page

of 31

Creating a New Proposal To create a new proposal in KSU’s SmartGrant system, you will need to complete the following top-level steps:

1. Complete the Introductory Proposal Data.

2. Generate budget periods.

3. Create a preliminary budget, including at least the faculty effort.

4. Generate the default forms for the proposal by accessing Print Forms.

5. Initiate routing for approval.

Navigating to a New Proposal

1. From the main page of the KSU Smart Grant system, click Proposal Functions (see Figure 5).

2. Click Create or Update Proposal.

3. Click New Proposal.

Figure 5 - Navigating to a new proposal

You are now at the new proposal page and can enter information for your proposal (See Figure 6).

Figure 6 - New proposal page

of 31

Step 1: Proposal Preliminary Info

After navigating to the new proposal page, you are ready to start your proposal. Begin with the first tab,

Proposal Preliminary Info (see Figure 7). Required fields are marked with a red asterisk.

Figure 7 - Proposal Preliminary Info tab

Note: You cannot save your proposal until you complete the required fields on the first tab.

1. In the Long Title field, type the full, formal title of your proposal (see Figure 8).

Figure 8 - Creating your proposal

2. The Short Title field will automatically fill in (up to 81 characters).

3. Select from the Proposal Type drop-down menu:

a. If this is a new proposal, select NEW - New.

b. If this a renewal of a previous grant, select REN - Renewal.

4. Select the appropriate category from the Category drop-down menu, such as R – Research.

5. Enter the Due Date for the proposal.

6. Select the appropriate Due Date Type from the Due Date Type drop-down menu.

7. Optional: type in the Targeted Amount for your overall budget, if known.

8. Choose one: Contract, Grant, or Cooperative Agreement.

9. Select No for Grants.gov Submission. (The Office of Research will change this later, if needed.)

of 31

Selecting the Sponsor

1. Click the Search button next to Sponsor (see Figure 9).

Figure 9 - Search for Sponsor

2. The Sponsor Lookup window will appear (see Figure 10).

Figure 10 - Sponsor Lookup Window

3. Type part of the Sponsor Name or ID in the search field, and press the Search button.

4. Select a Sponsor from the results in the drop-down menu. Choose a Sub-Program will appear after

making your selection.

5. Select a Sub-Program from the drop-down menu.

Note: If the correct Sponsor is not available, contact the KSU Office of Research to have it added. For the

majority of Sponsors, you will need to select "General Program Description" as the Sub-Program.

6. Click the Select button.

7. Additional options may appear, depending on the specific sponsor. In the example for NIH, check boxes

for Modular Grant and Prepare Internal Detail Budget will appear. Check the boxes that apply to your

proposal (see Figure 11).

Figure 11 - Additional Grant Information

8. Select if the program will be On-Campus or Off-Campus (see Figure 12).

Figure 12 - Select On or Off Campus.

of 31

Searching for a Principal Investigator

1. Click the search button next to Pls/Depts (see Figure 13).

Figure 13 - Search button for PIs

2. The PI Lookup window will appear (See Figure 14).

Figure 14 - PI Look-Up

3. Your name will already be listed as the Principal Investigator. If you should be the only PI listed, click

the Complete button.

4. If additional PIs should be added:

a. Type the Last Name of the PI in the search field.

b. Press the Enter key on the keyboard.

c. Select the PI from the drop-down menu.

d. Click the Select button.

e. Continue searching for additional names as needed.

f. Click Complete when finished selecting PI names.

Departments and Percent Credit

1. Click the Search button next to Depts/% Credit (see Figure 15).

Figure 15 - Search for Depts.

2. The Departments and % Credit window appears.

The PI’s default department account code or codes are already populated, with the first account listed at

100% credit.

3. If the account is correct, click the Complete button.

of 31

4. To edit, click the green edit button to the left of the Department in the list (see Figure 16).

Figure 16 - Dept/% Credit Look-Up

5. Enter the correct % Credit.

6. Click the Update button.

7. Continue modifying other departments as needed.

8. Click the Complete button.

After clicking the Complete button, you will be brought back to the new proposal page.

Updating (Saving) your Proposal

1. Click the Update bottom at the bottom of the page (see Figure 17).

Figure 17 - Update the proposal.

2. Click OK at the prompt asking if you wish to update your proposal.

Your information is saved and you will be brought to the proposal main page. A GPID# will appear in the

upper-left corner of the screen (see Figure 18). Make note of your GPID# for easy reference later.

Figure 18 - Proposal Main Page with GPID#

of 31

Completing the Intro Proposal Data

Click the Intro Proposal Data button in the left-side menu to continue updating your proposal (see Figure 19).

Figure 19 - Intro Proposal Data

The Proposal Preliminary Info screen appears.

Additional Information Tab

The Additional Information Tab is only needed if your proposal uses pass-through funding. Otherwise, you may

skip this tab.

1. Click the Additional Information tab at the top of the screen (see Figure 20).

Figure 20 - Additional Information Tab

2. If this grant uses pass-through funding, select the Search button next to Originator of Funds

(see Figure 21).

Figure 21 - Search for the Originator of Funds

3. The Originator of Funds lookup window appears.

4. In the Search field, enter the name of the originator of the pass-through funds.

5. Press the Search button.

6. Select the sponsor from the drop-down list.

Classification Tab

1. Click the Classification tab at the top of the screen (see Figure 22).

Figure 22 - Classification Tab

of 31

2. Complete the Category field by selecting from the drop-down menu (see Figure 23).

Figure 23 - Select a category

The other fields on this tab are not required.

Site Specific Data Tab

1. Click the Site Specific Data tab at the top of the screen (see Figure 24).

Figure 24 - Site Specific Data Tab

2. The Kennesaw State University Sponsored Research Approval Form screen appears.

This tab contains KSU-specific information for internal use. All sections are required.

3. Complete all sections on this tab, scrolling down to complete the fields (see Figure 25).

Figure 25 - KSU Specific Data

of 31

4. Note that additional fields will appear based on your answers to the prompts, such as the items in the

Regulatory Compliance section (see Figure 26).

Figure 26 - Additional fields may appear

Grants.gov Submission

The last tab of Intro Proposal Data, the Grants.gov Data tab (see Figure 27), will be completed by the Office of Research if needed.

Figure 27 - Grants.gov Tab

Update the Proposal

1. Click the Update button at the bottom of any of the Intro Proposal Data tabs to save your progress (see Figure 28).

Figure 28 - Update the proposal

2. Click OK at the prompt (see Figure 29).

Figure 29 - Update prompt

3. To return to the main screen of your proposal, click the Back to Create / Update Proposal button in

the left-side bar (see Figure 30).

Figure 30 - Returning to the main screen

of 31

Step 2: Budget Preliminary Information

The Budget Preliminary Information area is where you will create budget periods for your proposal. For

example, a 2-year proposal will most likely have 2 budget periods: 1 period for each year.

1. From the main screen of your proposal, click the Budget Prelim Info button in the left-side menu

(see Figure 31).

Figure 31 - Accessing Budget Preliminary Information

2. The Budget Preliminary Information pop-up window appears (see Figure 32).

Figure 32 - Budget Preliminary Information pop-up window

3. Enter your Project Start Date, e.g. 7/1/2014.

4. Enter your Project End Date, e.g. 6/30/2016.

5. Click the Calculate button. Drop down menus default to correct selection.

of 31

6. The budget periods for your proposal are generated, with Cost of Living Percent and F & A Rates

automatically completed (see Figure 33).

Figure 33 - Budget periods are generated

7. If your proposal’s F & A Rate will be different than the default percentage, you may change it at this

time.

a. If changing the F & A rate, make sure to choose an F & A Rate Justification from the drop-down

menu and enter a comment in the Comments field.

8. Click the Complete button.

9. At the Budget Preliminary Information Updated! prompt, click the OK button.

10. You are returned to the proposal main page.

of 31

Step 3: Budget Detail

The Budget Detail area is where you will create a budget for your proposal. This includes a budget for time

spent by the Principal Investigators and any other personnel; non-personnel costs such as travel and

equipment; and indirect costs (F&A). The minimum data to be entered is the Personnel Cost for the Principal

Investigators; other costs are optional at this time.

1. From the main screen of your proposal, click the Budget Detail On Campus or Off Campus button in

the left-side menu (see Figure 34).

Figure 34 - Accessing Budget Detail

2. The initial budget summary appears, showing your Target Amount (if entered in the Proposal

Preliminary Info) and zeroes for all other fields (see Figure 35).

Figure 35 - Initial budget detail screen

Personnel Cost

1. In the left-side menu, select the Personnel Cost menu item.

2. The Personnel Cost pop-up window appears. Note the 3 tabs at the top of this window (see Figure 36).

Figure 36 - Personnel Cost window

Note: You are currently working in Budget Period: 1, and the dates are listed at the top of this screen. Each

budget period will be considered separately.

of 31

3. The first tab is Investigators. On this tab, you will be budgeting for the time of the Principal

Investigator(s). Complete the following items on this tab (see Figure 37).

Figure 37 - Personnel costs for PIs

a. Choose an Entry Type from the drop-down menu: Dollars, Tot Doll (Total Dollars), Months, or

Pct. Effort.

b. Click the blue bubble icon to the left of the PI’s name.

c. The Principal Investigator Budget Line Entry appears at the bottom of this window.

d. Enter the amount of Effort for this PI for this budget period, based on the Entry Type you chose,

e.g. Months.

e. Click the Complete button.

Note: The Investigators tab is the only tab required to be entered by the PI. Continue entering other

personnel and non-personnel budget items if desired. Otherwise, continue to Updating your Budget.

of 31

4. The second tab is SR. Personnel. On this tab, you will be budgeting for the time of KSU faculty who are

not Principal Investigators.

a. Click the SR. Personnel tab.

b. Choose an Entry Type from the drop-down menu: Dollars, Tot Doll (Total Dollars), Months, or

Pct. Effort.

c. To add a person to Senior Personnel, click the Add button (see Figure 38).

Figure 38 - Click Add to add Senior Personnel

d. In the Name field, type all or part of the individual’s last name.

e. Press the Enter key on your keyboard.

f. Choose the appropriate person from the search results dropdown list.

g. Click the Add button.

h. Enter the amount of Effort for this individual, based on the Entry Type defined at the top of this

window, e.g. Months.

i. Click the Complete button.

5. The third tab is Other Personnel. On this tab, you will be budgeting for the time of other employees,

such as Graduate Students.

a. Click the Other Personnel tab.

b. Click the Add button (see Figure 39).

Figure 39 - Click Add to add Other Personnel

of 31

c. The Other Personnel Budget Line Entry area appears at the bottom of the window

(see Figure 40).

Figure 40 - Adding Other Personnel

d. Choose the personnel Type from the dropdown list, e.g. Graduate Student.

e. Enter a Description.

f. Enter the Quantity of this type of personnel.

g. Enter the number of Months of effort.

h. Enter the total Wages for this type of personnel.

i. Click the Complete button.

6. When you are finished entering all types of needed personnel, click the Complete button.

7. You are returned to the Budget Detail screen.

Non-Personnel Cost

1. In the left-side menu, select the Non-Personnel Cost menu item.

2. The Non-Personnel Cost pop-up window appears. Note the 5 tabs at the top (see Figure 41).

Figure 41 - Non-Personnel Cost window

a. Tabs are available for Other Cost (Materials & Supplies, Participant Costs, etc.), Travel Cost,

Equipment Cost, Subcontractor Cost, Cost Share Only (click More tabs), and Sponsor Furnished

(click More tabs).

of 31

b. Use any tabs that apply to your proposal.

3. For example, click the Travel tab to enter estimated travel costs (see Figure 42).

Figure 42 - Adding a new item on the Travel Cost tab

a. Click the Add button.

b. A Travel Budget Line Entry appears at the bottom of the window (see Figure 43).

Figure 43 - Completing details for a Travel Cost item

c. Choose the appropriate Cost Type from the dropdown list, such as Travel – Domestic.

d. Enter a Description.

e. Enter a Justification.

f. Enter the estimated Project Cost for this item.

g. Click the Complete button.

4. When you are finished entering budget items on all tabs, click the Complete button.

5. You are returned to the Budget Detail screen.

of 31

Updating your Budget for Period 1

1. On the Budget Detail page, click the View Budget Summary button in the left-side menu

(see Figure 44).

Figure 44 - View Budget Summary button

2. Your Budget Summary is now updated to include the costs you have entered for Period 1

(see Figure 45). Verify that the figures are as expected.

Figure 45 - Budget Summary for Period 1

3. Click the Update button to save your changes and return to the main screen of your proposal.

of 31

Replicating your Budget for Other Budget Periods

By replicating budget periods, you save the time of re-entering your budget for each period.

1. From the main screen of your proposal, click the Replicate Budget Period button in the left-side menu

(see Figure 46).

Figure 46 - Replicate Budget Period button

2. Click the blue bubble icon to the left of Period-1 (see Figure 47).

Figure 47 - Click to replicate

3. At the prompt, click OK (see Figure 48).

Figure 48 - Confirmation of replicating budget periods

4. You will receive a confirmation message. Click OK.

5. Continue replicating Budget Periods until all the periods for your proposal are filled.

6. To return to the main screen of your proposal, click the Back to Create / Update Proposal button in

the left-side menu.

of 31

Editing the Copied Budget Period

After you have replicated a budget period, you may need to make changes. For example, some costs will only

be incurred in one period, not all periods.

1. From the main screen of your proposal, click the Budget Detail On Campus or Off Campus button

(see Figure 49).

Figure 49 - Budget Detail button

2. Your updated Budget Summary appears.

3. To make changes, select Personnel Cost or Non-Personnel Cost, as needed. For example, select Non-

Personnel Cost to make changes to the Period 2 Travel budget.

4. Select the Travel Cost tab (or the tab you need to modify).

5. Select the Period>> button at the bottom of the screen to advance to the period you wish to modify,

e.g. Period 2 (see Figure 50).

Figure 50 - Advancing to the next budget period

Note: Advancing to the next budget period is a manual process, done by clicking the Period>> button. If you

skip this step, you will be modifying the Period 1 budget.

6. Verify that the correct period is now listed above your line items.

7. Click the blue bubble icon to the left of the line item you wish to modify, e.g. Travel – Domestic.

8. The line entry appears.

a. To edit the item, make the desired changes and click the Complete button.

b. To remove the item, click the Delete button.

9. Click the Complete button to save your changes and return to the Budget Summary screen.

10. After you are finished making modifications to the Period 2 budget, click the View Budget Summary

button.

11. Your Budget Summary is now updated to include the costs you have entered for Period 1 and Period 2,

etc. Verify that the figures are as expected.

12. Click the Update button to return to the main screen of your proposal.

of 31

Step 4: Generating Forms

Before you can submit your proposal for routing, you must generate the default proposal forms.

You may also wish to attach documents that your department chair or college dean will need to see in order

to approve your proposal, such as an abstract or an initial budget document.

Note: File names should only include the following characters: lowercase and uppercase letters, numbers,

underscore, period (no spaces allowed).

1. From the proposal main screen, click the Non-Budget Information button in the left-side menu

(see Figure 51).

Figure 51 - Accessing Non-Budget Information

2. Click the Print Forms button in the left-side menu (see Figure 52).

Figure 52 - Accessing forms

3. Click OK to accept the current formset (see Figure 53).

Figure 53 - Accept the default formset

4. The default forms for the selected sponsor are generated.

of 31

5. To edit any of the forms, follow the steps below.

a. Next to the form you wish to edit, e.g. the Abstract, click the Edit link (see Figure 54).

Figure 54 - Edit an existing form

b. An editable PDF form appears (see Figure 55).

Figure 55 - Fillable PDF form

c. Type or paste your desired text in the available text boxes.

d. Click the Save & Exit button above the form.

6. To replace any of the forms with your own PDF document, follow the steps below.

a. Next to the form you wish to replace, e.g. Abstract, click the Replace link (see Figure 56).

Figure 56 - Replace an existing form

of 31

b. The Replace Form screen appears (see Figure 57).

Figure 57 - Browse to replace a form with another file

c. Click the Browse button.

d. Locate the file on your computer and select it.

e. Click the Open button.

f. Click the OK button.

7. To upload any additional documents to the Form Set, follow the steps below.

a. Click the Insert Document link (see Figure 58).

Figure 58 - Insert a new document

b. The Insert Form screen appears (see Figure 59).

Figure 59 - Insert Form screen

of 31

c. Click the Browse button.

d. Locate the file on your computer and select it.

e. Click the Open button.

f. Enter a Description for the item.

g. Optionally, choose the Document Type from the dropdown list.

h. In the Insert Position dropdown list, choose the desired location for your new document.

i. Click the OK button.

8. Click the Back to Non-Budget Information button in the left-side menu (see Figure 60).

Figure 60 - Back to Non-Budget Information

9. Click the Back to Create/Update Proposal button in the left-side menu (see Figure 61).

Figure 61 - Back to Create/Update Proposal button

The Office of Research will modify these forms later. For now, you simply need to generate them so you can

move forward to Routing, plus add any documents required by your approvers.

Step 5: Routing your Proposal for Approval

Initiating Routing in SmartGrant will send your proposal for approval through your department chair, your

college dean, and the Office of Research. You must receive approval before your proposal can be submitted

to the sponsor. Make sure to allow adequate time for approval.

1. From the main screen of your proposal, click the Submittal Process button in the left-side menu

(see Figure 62).

Figure 62 - Submittal Process button to access Routing

2. Click the Online Routing button in the left-side menu (see Figure 63).

Figure 63 - Online Routing button

3. Click OK at the prompt.

of 31

4. Click the Start Routing button (see Figure 64).

Figure 64 - Routing Levels and Start Routing

5. Since the Principal Investigator is the first approver in Routing, you will be automatically prompted to

approve your own proposal (see Figure 65).

Figure 65 - Accept Proposal and Update to approve your proposal

a. Select the Accept Proposal item.

b. Click the Update button.

6. Your proposal will be forwarded to the next level of Routing.

of 31

7. Click the Back to Create/Update Proposal button (see Figure 66).

Figure 66 - Back to Create/Update Proposal button

As routing occurs, each level is automatically notified of the need for approval via email. The email contains a

direct link to approve the proposal. Additionally, as each level approves your proposal, you will receive an

automatic email notification.

Exiting your Proposal 1. Click the Back to Proposal Functions Menu button. 2. You will receive a message that the Record Lock is released.

3. Click the Exit button at the bottom of the screen to log out.

Figure 67 - Exit

Accessing an In-Progress Proposal There are several ways to access an in-progress proposal. The instructions below explain 3 methods.

Last Accessed Proposal

1. From the main menu of SmartGrant, select Proposal Functions.

2. Click the Last Accessed button to re-open your last accessed proposal (see Figure 68).

Figure 68 - Last Accessed Proposal

Get Proposal by GPID


2. Click the Get Proposal by GPID button.

3. At the prompt, enter your proposal number. This is a 5-digit number starting with the fiscal year,

e.g. 14101.

of 31

Browse to a Proposal

If you do not know the GPID of your proposal, follow the steps below.


2. Click the Create or Update Proposal button.

3. Click the Update Proposal button.

4. Click the List button to list all proposals you have access to edit (see Figure 69).

Figure 69 - List all proposals

5. In the list that appears, click the GPID # of the proposal you wish to edit, e.g. 14101. Make note of this

GPID # for future reference.

ksu smartgrant - kennesaw state university · page 10 of 31 searching for a principal investigator...

Documents