kubix specification guide
DESCRIPTION
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Sed tincidunt arcu vel lacus porttitor pulvinar elementum augue aliquet. Aliquam erat volutpat.TRANSCRIPT
1
Kubix Product Specifi cation GuideKitchens for Living
Kubix
The Symphony Group Plc
Pen Hill Estate,
Park Spring Road, Barnsley
South Yorkshire, S72 7EZ
Tel: 01226 446000
Fax: 01226 711185
www.symphony-group.co.uk
In keeping with our policy of continuous product development, we reserve the right
to change colours, designs, materials, descriptions or methods of manufacture. Such
changes may be made without notice and without incurring any liability. Nothing
in this publication should be considered to be part of any contract. The illustrations
included in this publication are to indicate general format and are not necessarily
correctly scaled, proportioned or detailed.
Natural wood is used in some of our kitchens. As a natural material, wood refl ects
the endless variety of grains and textures found in nature and such variances can be
expected in any selection of timber fronted units. Timbers mellow when exposed to
sunlight, so a colour change can be expected.
PVC laminates and melamine fi nishes are also subject to slight colour change over
a period of years. Unless specifi ed otherwise, the expression ‘solid timber’ refers to
door and drawer fronts only. A copy of our conditions of sale is available on request.
Errors and omissions excepted.
Copyright and all other rights in this brochure and the photographs and other works
upon which it is based, are owned by The Symphony Group PLC. No part of the
brochure and said photographs and other works may be reproduced or transmitted
in any form or by any means (including but not limited to photocopying or storing
in any electronic medium) without the prior express written permission of The
Symphony Group PLC.
© The Symphony Group Plc 2012
Ref. KUSPECMAY12
When you have fi nished with this brochure please recycle it
Creating the perfect living space
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 40-1 10/05/2012 11:08
2 3
CONTENTS
General Information 4-5
15mm High Performance Vista Cabinets and
15mm Moisture Resistant Vista Cabinets 6-7
18mm Excel Cabinets 8-9
18mm Esprit Cabinets 10-11
Esprit Planning and Installation 12-13
Adjustment and Fixing - Manual 14
Adjustment and Fixing - Electronic 15
Product Availability Matrix 16-17
Usage Guidance and Ordering Checklist 17
Vista and Excel Base Units 18
Vista and Excel Sink and Hob Units 18-19
Vista and Excel Corner Base Units 19
Vista and Excel Wall Units 20
Vista and Excel Corner Wall Units 21
Vista and Excel Appliance Housing 22
Vista and Excel Integrated Housing 22
Vista and Excel Broom Units 22
Vista and Excel Larder Units 22
Vista and Excel Over Cooker Hood Units 23
Vista and Excel Boiler Housings 23
Vista and Excel Ready For Assembly 24-25
Esprit Range Content 26-27
Back, End, Filler and Blender Panels 28
Cornice and Pelmet 28
Corner Posts 28
Accessories 29
Esprit Accessories 30
Lighting 31
Worktops 32-33
Performance Testing/Green Credentials 34
Care and Attention 35
One in four community and private
homes throughout the UK is fi tted
with a Symphony product, which is
testament to our extensive knowledge
of the market and the 40 years
experience we have in providing
premium products and solutions.
All dimensions in the specifi cation document are in millimetres.
INTRODUCTION
Kubix Product Specifi cation Guide
Kitchens for Living
We are the largest privately owned fi tted furniture supplier in the UK today. Our place as market leader, our
large product portfolio, our extensive menu of services, our award winning Extranet facility, as well as our
long standing commitment to service and quality make Symphony the number one choice for community
housing projects.
Our outstanding single source service covers all aspects of project management from fi rst contact through to
fi nal delivery. Symphony supplies nationally and we pride ourselves in supporting our quality products with
renowned design, technical expertise and management guidance locally. “Supply Nationally. Support Locally”
is therefore our commitment and promise to all our clients/customers and partnerships.
Symphony maintains a rigorously high standard at all levels. From design to production methods, we provide
quality kitchens which are built to last, each one conforming to the high standards of our quality assurance
programme. This has earned Symphony a range of industry recognised standards, including the FIRA Gold Award.
Choice and fl exibility are key and we are continually expanding our range to provide even greater scope for
meeting our clients’ and customers’ design and capacity requirements. We are dedicated to providing you with
premium products in compliance with market requirements.
Symphony has a culture of being green, it is embedded in all our business practices. We maintain a responsible
attitude to the environment and sustainability issues and our overriding approach is driven by an understanding
of the impact of our activities on future generations.
DESIGN
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 2-3 10/05/2012 11:08
2 3
CONTENTS
General Information 4-5
15mm High Performance Vista Cabinets and
15mm Moisture Resistant Vista Cabinets 6-7
18mm Excel Cabinets 8-9
18mm Esprit Cabinets 10-11
Esprit Planning and Installation 12-13
Adjustment and Fixing - Manual 14
Adjustment and Fixing - Electronic 15
Product Availability Matrix 16-17
Usage Guidance and Ordering Checklist 17
Vista and Excel Base Units 18
Vista and Excel Sink and Hob Units 18-19
Vista and Excel Corner Base Units 19
Vista and Excel Wall Units 20
Vista and Excel Corner Wall Units 21
Vista and Excel Appliance Housing 22
Vista and Excel Integrated Housing 22
Vista and Excel Broom Units 22
Vista and Excel Larder Units 22
Vista and Excel Over Cooker Hood Units 23
Vista and Excel Boiler Housings 23
Vista and Excel Ready For Assembly 24-25
Esprit Range Content 26-27
Back, End, Filler and Blender Panels 28
Cornice and Pelmet 28
Corner Posts 28
Accessories 29
Esprit Accessories 30
Lighting 31
Worktops 32-33
Performance Testing/Green Credentials 34
Care and Attention 35
One in four community and private
homes throughout the UK is fi tted
with a Symphony product, which is
testament to our extensive knowledge
of the market and the 40 years
experience we have in providing
premium products and solutions.
All dimensions in the specifi cation document are in millimetres.
INTRODUCTION
Kubix Product Specifi cation Guide
Kitchens for Living
We are the largest privately owned fi tted furniture supplier in the UK today. Our place as market leader, our
large product portfolio, our extensive menu of services, our award winning Extranet facility, as well as our
long standing commitment to service and quality make Symphony the number one choice for community
housing projects.
Our outstanding single source service covers all aspects of project management from fi rst contact through to
fi nal delivery. Symphony supplies nationally and we pride ourselves in supporting our quality products with
renowned design, technical expertise and management guidance locally. “Supply Nationally. Support Locally”
is therefore our commitment and promise to all our clients/customers and partnerships.
Symphony maintains a rigorously high standard at all levels. From design to production methods, we provide
quality kitchens which are built to last, each one conforming to the high standards of our quality assurance
programme. This has earned Symphony a range of industry recognised standards, including the FIRA Gold Award.
Choice and fl exibility are key and we are continually expanding our range to provide even greater scope for
meeting our clients’ and customers’ design and capacity requirements. We are dedicated to providing you with
premium products in compliance with market requirements.
Symphony has a culture of being green, it is embedded in all our business practices. We maintain a responsible
attitude to the environment and sustainability issues and our overriding approach is driven by an understanding
of the impact of our activities on future generations.
DESIGN
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 2-3 10/05/2012 11:08
4 5
GENERAL INFORMATION
CABINETS
Kubix’s rigid cabinet range has been tested
to and complies with the requirements of
BS 6222 Part 2 Level H.
18MM EXCEL & 18MM ESPRIT
Side panels, bases, shelves and rails are
manufactured from 18mm high density
melamine faced chipboard. Plinths are
manufactured from 15mm chipboard.
All vulnerable cabinet edges are lipped
with melamine paper bonded with
machine applied hot melt adhesive to
deter moisture seepage. All chipboard
used in manufacture complies with
BS EN-312-P2. Most 18mm cabinets are
supplied on adjustable legs.
15MM HIGH PERFORMANCE VISTA
Side panels, bases, shelves and plinths are
manufactured from 15mm high density
melamine faced chipboard. (All rails are
manufactured from White MDF). Plinths
are manufactured from 15mm chipboard.
All vulnerable cabinet edges are lipped
with melamine paper bonded with
machine applied hot melt adhesive to deter
moisture seepage. All chipboard used in
manufacture complies with
BS EN-312-P2. All 15mm cabinets are
supplied on adjustable legs.
15MM MOISTURE RESISTANT VISTA
Cabinet ends, shelf, base and plinth
components are manufactured from
high density, fi ne surface 15mm coreboard
to BS EN 312-P3, giving improved
moisture resistance.
BACKS
All units have inset hardboard fi tted backs
as standard. All corner units have fi tted
blanking panels. Backs are inset by 66mm
on 600mm deep modules to allow
services to run behind (15mm on 500mm
deep modules).
IN-SITU REPAIRABILITY
Easily removable end and back panels
facilitate fast, effi cient repairability in-situ.
Hinge repair plates are also available. Please
ask your Symphony representative for
samples and information.
DRAWER SYSTEM - 15MM VISTA AND
18MM EXCEL
The 3 metal sided drawer box system
incorporates a 15mm chipboard bottom.
Drawer sides are enamel coated for high
abrasion resistance. The smooth action,
metal roller system, featuring parallel
guides and built-in drawer stop, has
been independently tested by FIRA and
successfully meets the requirements of
BS 6222 Part 2 Level H. Drawer fronts are
adjustable horizontally and vertically.
DRAWER SYSTEM - 18MM ESPRIT
18mm Esprit has a 16mm chipboard
base and quadro runners. The system has
been independently tested by FIRA and
successfully meets the requirements of
BS 6222 Part 2 Level H. The drawer box
is fully extendable and has soft close
pneumatic action.
LOCKABLE UNITS
Fully lockable single units - base and
wall - are available. Please see pages
18 and 21 for order codes or ask your
Symphony representative for information.
READY FOR ASSEMBLY
A wide range of base and wall units
and colour options are available in ready
for assembly format for ease of storage
and quick, easy assembly on site. Please
ask your Symphony representative for
information.
HINGES
On both 15mm Vista, 18mm Excel and
18mm Esprit, hinges are 170° opening
as standard. 110° opening hinges are
an option. The all metal, 110° and 170°
hinges comply fully with BS 6222 Part 2
Level H, allowing full alignment.
METAL FITTINGS
All metal fi ttings and screws used in
manufacture are plated.
WIREWORK
All wirework used in the ranges is chrome,
for a tough hygienic fi nish.
PLINTHS
Plinths are front fi xed to allow easy access
to services and for cleaning under units.
SINKTOPS
Sinktops are offered in a comprehensive
selection of materials, sizes, styles and
colours. The full sink and tap offer is
specifi ed in our separate sink and tap
brochure.
WORKTOPS
Worktops are FIRA Gold Award certifi ed,
constructed from laminate bonded to
chipboard and are available in 28mm and
38mm bullnose styles. Front edges have
an application of wax for extra protection
against water ingress. Back edges are
sealed by wax injection. Refer to page 34
for details. Moisture resistant worktops, to
BS EN 312-P3 specifi cation, are available in
a range of colours.
SHELF SUPPORTS
On 15mm Vista shelves are supported
on plastic injection moulded shelf clips.
In addition, all units over 600mm in
length have central supports. 18mm Excel
and 18mm Esprit units have metal shelf
supports.
HANDINGS
Many units are described as left or right
handed. Handings should be expressed as
if looking at the unit from the front. Ready
for assembly units can be used as both left
and right handed.
Handings required are:
The side of the hinge on single units
(e.g. left hand hinged)
The side of the blanked end of corner units
(e.g. left hand blanked)
The position of the drainer on sink units
(e.g. left hand drainer)
The side of a dummy drawer on a double
base unit (e.g. left hand side)
LEGS
To provide easy installation, adjustable legs
are included (allowing adjustment from
140mm to 175mm) on both 15mm Vista
and 18mm Excel.
SOFTPLUS
SoftPlus is a soft close system available
as an optional extra on both 15mm Vista
and 18mm Excel. SoftPlus is available with
a soft close drawer system and soft close
hinges.
UNIT CODES
Kubix’s unit codes consist of two or three
letters, followed by a series of numbers. In
some cases one or two letters may follow
the numbers.
PREFIX LETTERS
These indicate the type of unit, such
as BU for base unit; WU for wall unit;
BR for broom unit; and so on.
NUMBERS
The numbers indicate the width of the
unit followed either by the depth, or in
case of wall units, the height. For example
a WU1056 is a wall unit 1000mm wide
and 561mm high. A BU56 is a base unit
500mm wide and 600mm deep.
SUFFIX LETTERS
Any letters following the number code
indicate a variant of the type as follows:
A
B
C
D
E
F - Full height door base unit.
D - Drawer line base unit (units
will be supplied drawer line
unless specified otherwise).
LK - Lockable units.
UNIT DIMENSIONS
All dimensions are expressed in millimetres
as shown.
CORNER BASE UNITS
All corner base units have centre hung
doors with 110° hinges on 15mm Vista,
18mm Excel and 18mm Esprit. Corner
posts and blanking panels are fi tted as
standard. On corner base units with a
corner post, a white blanking panel covers
the void of the unit. A 600mm colour
co-ordinated blanking panel is fi tted where
corner posts are NOT required – e.g. when
the blank abuts a void for a freestanding
appliance or tray space.
IMPORTANT: Please specify the handing
of the side of the blanking panel when
ordering.
CORNER POST
The corner post allows product ranges with
protruding handles to be offset by 30mm
in order to avoid possible clashing of
drawer handles in a corner. The corner post
automatically spaces out the units to the
correct size across Dimension A. However
the fi tter must remember to position the
corner unit (as appropriate) from the wall.
(See page 28).
ROLL EDGE SINKTOPS IN CORNERS
Should it be necessary to position a roll
edge sinktop in a corner with a corner
post, then the worktops should be
increased in size to allow for the 30mm
extension. If using postformed worktops,
then two worktops are required as
illustrated on the right.
Please note that worktop B cannot run into
the corner as this would result in a 30mm
gap between it and the sinktop.
NB: Sit-on sinktops are only available
for use with 30mm worktops.
L-SHAPE CORNER BASE UNITS
A corner unit with either a shelf or a
revolving carousel. The two doors are
hinged on the end panels and open to
170°. In order to facilitate transportation,
the unit is supplied in two halves and the
carousel or shelf must be fi tted on site. Full
height door or door and dummy drawer
front styles are available.
The dummy drawer fronts are fi xed
to the doors.
CORNER SINK BASE UNITS
1000mm and 1200mm corner base units
can also be supplied as corner sink units.
To specify a corner sink unit, change the
prefi x letters on the standard corner base
unit code from ‘CB’ to ‘CS’ as shown in
the example.
CORNER BASE UNITS VARIATIONS
To specify a corner base or corner sink
unit with a manufacturing variation,
suffi x the standard unit code as shown in
the examples.
GENERAL INFORMATION
NB: When designing or
Corner Base Unit
(1000mm)
specifying for a kitchen,
allowance must be made for
the 30mm extension, both i
Depth ofWorktop(500mm/600mm)
Depth ofWorktop(500mm/600mm)
CornerPost
ReturnUnit
Dim
en
sio
n A
(530
mm
/6
30m
m)
n
the unit positioning and the
sizes of the worktops.
Space out from return wall
Unit Code Description
CS106DCCorner sink unit
1000 x 600 x 870, 600 door
Variation Suffi x Unit Code Description
No corner post
BO CB106DCBO
Corner base unit 1000 x 600 x 870.
600 door,no corner post
Dummy drawer
DD CB106DADD
Corner base unit 1000 x 600 x 870.
500 door,dummy drawer
No corner post and dummy drawer
BS CB106DABS
Corner sink unit 1000 x 600 x 870.
500 door, no cornerpost, dummy drawer
Worktop A
Worktop B
Plu
s 30
mm
530mm or630mm
MR
HP
Variations of corner base
unit or appliance housing
formats
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 4-5 10/05/2012 11:09
4 5
GENERAL INFORMATION
CABINETS
Kubix’s rigid cabinet range has been tested
to and complies with the requirements of
BS 6222 Part 2 Level H.
18MM EXCEL & 18MM ESPRIT
Side panels, bases, shelves and rails are
manufactured from 18mm high density
melamine faced chipboard. Plinths are
manufactured from 15mm chipboard.
All vulnerable cabinet edges are lipped
with melamine paper bonded with
machine applied hot melt adhesive to
deter moisture seepage. All chipboard
used in manufacture complies with
BS EN-312-P2. Most 18mm cabinets are
supplied on adjustable legs.
15MM HIGH PERFORMANCE VISTA
Side panels, bases, shelves and plinths are
manufactured from 15mm high density
melamine faced chipboard. (All rails are
manufactured from White MDF). Plinths
are manufactured from 15mm chipboard.
All vulnerable cabinet edges are lipped
with melamine paper bonded with
machine applied hot melt adhesive to deter
moisture seepage. All chipboard used in
manufacture complies with
BS EN-312-P2. All 15mm cabinets are
supplied on adjustable legs.
15MM MOISTURE RESISTANT VISTA
Cabinet ends, shelf, base and plinth
components are manufactured from
high density, fi ne surface 15mm coreboard
to BS EN 312-P3, giving improved
moisture resistance.
BACKS
All units have inset hardboard fi tted backs
as standard. All corner units have fi tted
blanking panels. Backs are inset by 66mm
on 600mm deep modules to allow
services to run behind (15mm on 500mm
deep modules).
IN-SITU REPAIRABILITY
Easily removable end and back panels
facilitate fast, effi cient repairability in-situ.
Hinge repair plates are also available. Please
ask your Symphony representative for
samples and information.
DRAWER SYSTEM - 15MM VISTA AND
18MM EXCEL
The 3 metal sided drawer box system
incorporates a 15mm chipboard bottom.
Drawer sides are enamel coated for high
abrasion resistance. The smooth action,
metal roller system, featuring parallel
guides and built-in drawer stop, has
been independently tested by FIRA and
successfully meets the requirements of
BS 6222 Part 2 Level H. Drawer fronts are
adjustable horizontally and vertically.
DRAWER SYSTEM - 18MM ESPRIT
18mm Esprit has a 16mm chipboard
base and quadro runners. The system has
been independently tested by FIRA and
successfully meets the requirements of
BS 6222 Part 2 Level H. The drawer box
is fully extendable and has soft close
pneumatic action.
LOCKABLE UNITS
Fully lockable single units - base and
wall - are available. Please see pages
18 and 21 for order codes or ask your
Symphony representative for information.
READY FOR ASSEMBLY
A wide range of base and wall units
and colour options are available in ready
for assembly format for ease of storage
and quick, easy assembly on site. Please
ask your Symphony representative for
information.
HINGES
On both 15mm Vista, 18mm Excel and
18mm Esprit, hinges are 170° opening
as standard. 110° opening hinges are
an option. The all metal, 110° and 170°
hinges comply fully with BS 6222 Part 2
Level H, allowing full alignment.
METAL FITTINGS
All metal fi ttings and screws used in
manufacture are plated.
WIREWORK
All wirework used in the ranges is chrome,
for a tough hygienic fi nish.
PLINTHS
Plinths are front fi xed to allow easy access
to services and for cleaning under units.
SINKTOPS
Sinktops are offered in a comprehensive
selection of materials, sizes, styles and
colours. The full sink and tap offer is
specifi ed in our separate sink and tap
brochure.
WORKTOPS
Worktops are FIRA Gold Award certifi ed,
constructed from laminate bonded to
chipboard and are available in 28mm and
38mm bullnose styles. Front edges have
an application of wax for extra protection
against water ingress. Back edges are
sealed by wax injection. Refer to page 34
for details. Moisture resistant worktops, to
BS EN 312-P3 specifi cation, are available in
a range of colours.
SHELF SUPPORTS
On 15mm Vista shelves are supported
on plastic injection moulded shelf clips.
In addition, all units over 600mm in
length have central supports. 18mm Excel
and 18mm Esprit units have metal shelf
supports.
HANDINGS
Many units are described as left or right
handed. Handings should be expressed as
if looking at the unit from the front. Ready
for assembly units can be used as both left
and right handed.
Handings required are:
The side of the hinge on single units
(e.g. left hand hinged)
The side of the blanked end of corner units
(e.g. left hand blanked)
The position of the drainer on sink units
(e.g. left hand drainer)
The side of a dummy drawer on a double
base unit (e.g. left hand side)
LEGS
To provide easy installation, adjustable legs
are included (allowing adjustment from
140mm to 175mm) on both 15mm Vista
and 18mm Excel.
SOFTPLUS
SoftPlus is a soft close system available
as an optional extra on both 15mm Vista
and 18mm Excel. SoftPlus is available with
a soft close drawer system and soft close
hinges.
UNIT CODES
Kubix’s unit codes consist of two or three
letters, followed by a series of numbers. In
some cases one or two letters may follow
the numbers.
PREFIX LETTERS
These indicate the type of unit, such
as BU for base unit; WU for wall unit;
BR for broom unit; and so on.
NUMBERS
The numbers indicate the width of the
unit followed either by the depth, or in
case of wall units, the height. For example
a WU1056 is a wall unit 1000mm wide
and 561mm high. A BU56 is a base unit
500mm wide and 600mm deep.
SUFFIX LETTERS
Any letters following the number code
indicate a variant of the type as follows:
A
B
C
D
E
F - Full height door base unit.
D - Drawer line base unit (units
will be supplied drawer line
unless specified otherwise).
LK - Lockable units.
UNIT DIMENSIONS
All dimensions are expressed in millimetres
as shown.
CORNER BASE UNITS
All corner base units have centre hung
doors with 110° hinges on 15mm Vista,
18mm Excel and 18mm Esprit. Corner
posts and blanking panels are fi tted as
standard. On corner base units with a
corner post, a white blanking panel covers
the void of the unit. A 600mm colour
co-ordinated blanking panel is fi tted where
corner posts are NOT required – e.g. when
the blank abuts a void for a freestanding
appliance or tray space.
IMPORTANT: Please specify the handing
of the side of the blanking panel when
ordering.
CORNER POST
The corner post allows product ranges with
protruding handles to be offset by 30mm
in order to avoid possible clashing of
drawer handles in a corner. The corner post
automatically spaces out the units to the
correct size across Dimension A. However
the fi tter must remember to position the
corner unit (as appropriate) from the wall.
(See page 28).
ROLL EDGE SINKTOPS IN CORNERS
Should it be necessary to position a roll
edge sinktop in a corner with a corner
post, then the worktops should be
increased in size to allow for the 30mm
extension. If using postformed worktops,
then two worktops are required as
illustrated on the right.
Please note that worktop B cannot run into
the corner as this would result in a 30mm
gap between it and the sinktop.
NB: Sit-on sinktops are only available
for use with 30mm worktops.
L-SHAPE CORNER BASE UNITS
A corner unit with either a shelf or a
revolving carousel. The two doors are
hinged on the end panels and open to
170°. In order to facilitate transportation,
the unit is supplied in two halves and the
carousel or shelf must be fi tted on site. Full
height door or door and dummy drawer
front styles are available.
The dummy drawer fronts are fi xed
to the doors.
CORNER SINK BASE UNITS
1000mm and 1200mm corner base units
can also be supplied as corner sink units.
To specify a corner sink unit, change the
prefi x letters on the standard corner base
unit code from ‘CB’ to ‘CS’ as shown in
the example.
CORNER BASE UNITS VARIATIONS
To specify a corner base or corner sink
unit with a manufacturing variation,
suffi x the standard unit code as shown in
the examples.
GENERAL INFORMATION
NB: When designing or
Corner Base Unit
(1000mm)
specifying for a kitchen,
allowance must be made for
the 30mm extension, both i
Depth ofWorktop(500mm/600mm)
Depth ofWorktop(500mm/600mm)
CornerPost
ReturnUnit
Dim
en
sio
n A
(530
mm
/6
30m
m)
n
the unit positioning and the
sizes of the worktops.
Space out from return wall
Unit Code Description
CS106DCCorner sink unit
1000 x 600 x 870, 600 door
Variation Suffi x Unit Code Description
No corner post
BO CB106DCBO
Corner base unit 1000 x 600 x 870.
600 door,no corner post
Dummy drawer
DD CB106DADD
Corner base unit 1000 x 600 x 870.
500 door,dummy drawer
No corner post and dummy drawer
BS CB106DABS
Corner sink unit 1000 x 600 x 870.
500 door, no cornerpost, dummy drawer
Worktop A
Worktop B
Plu
s 30
mm
530mm or630mm
MR
HP
Variations of corner base
unit or appliance housing
formats
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 4-5 10/05/2012 11:09
76
UNIT DIMENSIONS 300 400 450 500 600 800 900 1000 1200
BASE UNITS 500 deep 0.08 0.11 - 0.14 0.17 0.25 0.28 0.31 0.37
600 deep 0.10 0.13 0.14 0.16 0.20 0.27 0.30 0.34 0.41
WALL UNITS 561 high 0.04 0.05 0.06 0.06 0.08 0.11 0.12 0.13 -
724 high 0.05 0.07 0.08 0.09 0.11 0.15 0.17 0.18 -
900 high 0.06 0.08 0.09 0.10 0.13 0.17 0.19 0.22 -
BROOM LARDER
(2100MM)
500 deep 0.23 - - 0.41 0.45 - - - -
600 deep 0.25 - - 0.44 0.52 - - - -
BROOM LARDER
(2276MM)
500 deep - - - 0.43 0.52 - - - -
600 deep 0.30 - - 0.48 0.63 - - - -
ANGLE CORNER
WALL UNITS
561 high - - - - 0.11 - - - -
724 high - - - - 0.14 - - -
900 high - - - - 0.18 - - - -
OVER COOKER
HOOD UNITS
300 high - - - - 0.04 - - - -
TALL APPLIANCE
HOUSING
2100 high - - - - 0.55 - - - -
2276 high - - - - 0.59 - - - -
CUBIC CAPACITIES (M³) 15MM CABINETS
15MM HIGH PERFORMANCE VISTA CABINETS AND 15MM MOISTURE RESISTANT VISTA CABINETS
15MM HIGH PERFORMANCEVISTA CABINETS
Cabinets are produced from 15mm
melamine faced, high density, fi ne
surface particle board to comply with
BS EN 312-P2. To deter moisture seepage in
to the panels, all exposed edges are lipped
with melamine tape, bonded with machine
applied, hot melt adhesive. Symphony’s
rigid cabinets have been tested to comply
with the requirements of BS 6222 Part 2
Level H. 15mm high performance cabinets
come in a range of colours to the exterior
and lipping and have a white interior.
15MM MOISTURE RESISTANT VISTA CABINETS
High density, fi ne surface 15mm coreboard
to BS EN 312-P3, is used to produce all
cabinet sides, shelves, bases and plinths,
providing improved moisture resistance.
All exposed edges are lipped to prevent
water penetration. Service life is maximised
and maintenance costs reduced by the
enhanced material specifi cation. 15mm
moisture resistant cabinets are available
with a white exterior and interior.
BACKS
To allow services to run behind the units
inset hardboard fi tted backs come as standard.
Backs for 600mm deep modules are inset
by 66mm and 500mm units by 15mm.
FRONTALS
Designed to endure the most demanding
conditions, frontals can be removed and
replaced easily.
DRAWER SYSTEM
The drawer box consists of two metal
sides,a metal back and a 15mm chipboard
base. For high abrasion resistance the metal
sides are coated in enamel. The smooth
action, metal roller system, featuring
parallel guides and built-in drawer stop,
has been independently tested by FIRA and
successfully meets the requirements of BS
6222 Part 2 Level H. Drawer fronts can be
adjusted horizontally and vertically.
SOFTPLUS
SoftPlus is a soft close system available
as an optional extra on 15mm Vista High
Performance and Moisture Resistant
cabinets. SoftPlus is available with a soft
close drawer system and soft close hinges.
HINGES
All metal hinges with three way adjustment
that open to 170° come as standard.
Hinges that open to 110° are an optional
extra. Full alignment can be achieved with
Symphony’s 110° and 170° all metal hinges
which comply fully with BS 6222 Part 2
Level H.
METAL FITTINGS AND WIREWORK
All metal fi ttings and screws are plated.
The wirework provides a tough,
hygienic fi nish.
PLINTHS
To allow easy access to services and for
cleaning, plinths are front fi xed.
SHELF SUPPORTS
Plastic, injection moulded clips are used
to support shelves. A central support is
supplied for all units over 600mm long.
LEGS
Adjustable legs are included (allowing
adjustment from 140mm to 175mm)
enabling easy installation.
LOCKABLE UNITS
For added security lockable base and wall
units are available for a limited door offer.
Locks can be ordered separately. See page 29.
CONSTRUCTION
Cam and dowel construction is used to produce the cabinets which provides optimum rigidity.
HP
MR
- High Performance
- Moisture Resistant
3
2
7
4
15
6
8
9
12
13
11
10
MR
HP
15MM VISTA CABINETS
Fully adjustable drawer front for full alignment
66mm void to rear providing easy installation
around pipework and plumbing
Removable hardboard back allows easy access
should a problem arise after installation
15mm RAL 9001 faced chipboard
drawer base
Durable 3 metal sided Supra drawer box
with self-closing action (available with
SoftPlus drawer box upgrade)
3-way fully adjustable all metal hinge 170° (or
110° option) for full alignment (available with
SoftPlus hinge upgrade).
15mm cabinet - BS EN 312-P2,
to BS EN 312 - P3
Internal cabinet fi nished in white with choice
of external cabinet colours
Cabinet lipped all round to prevent
water ingress
Continuous plinth
Optional plinth dust seal
Adjustable legs provide easy installation
(min. 140mm - max. 175mm)
Cam and dowel construction for extra rigidity
1
75
6
4
3
2
8
* All dimensions in millimetres.
15MM VISTA WALL UNIT SPECIFICATION
3-way fully adjustable all-metal
hinge - 170° (or 110° option) for full
alignment (available with SoftPlus
hinge upgrade)
3 wall unit heights
561mm/724mm/900mm
15mm cabinet - to BS EN 312-P2,
to BS EN 312-P3
Hardboard back with horizontal
fi xing rail
Under shelf support for strength
Internal cabinet fi nished in white with
choice of external cabinet colours
15mm shelving with plastic shelf
support (one shelf 561mm and 724mm
high, two shelves 900mm high)
Co-ordinated front edge lipping to
match external cabinet fi nish
1
2
3
4
5
6
7
8
15MM VISTA BASE UNIT SPECIFICATION
1
2
3
4
5
6
7
8
9
10
11
12
13
Vista Back RailShelf Bracket
Worktop Fixing Bracket
Drawer RunnersRail Fixing
Cam & DowelWall Fixing Bracket
Leg
Drawer Box
SoftPlus 110° Hinge
SoftPlus 170° Hinge
MR
MR
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 6-7 10/05/2012 11:09
76
UNIT DIMENSIONS 300 400 450 500 600 800 900 1000 1200
BASE UNITS 500 deep 0.08 0.11 - 0.14 0.17 0.25 0.28 0.31 0.37
600 deep 0.10 0.13 0.14 0.16 0.20 0.27 0.30 0.34 0.41
WALL UNITS 561 high 0.04 0.05 0.06 0.06 0.08 0.11 0.12 0.13 -
724 high 0.05 0.07 0.08 0.09 0.11 0.15 0.17 0.18 -
900 high 0.06 0.08 0.09 0.10 0.13 0.17 0.19 0.22 -
BROOM LARDER
(2100MM)
500 deep 0.23 - - 0.41 0.45 - - - -
600 deep 0.25 - - 0.44 0.52 - - - -
BROOM LARDER
(2276MM)
500 deep - - - 0.43 0.52 - - - -
600 deep 0.30 - - 0.48 0.63 - - - -
ANGLE CORNER
WALL UNITS
561 high - - - - 0.11 - - - -
724 high - - - - 0.14 - - -
900 high - - - - 0.18 - - - -
OVER COOKER
HOOD UNITS
300 high - - - - 0.04 - - - -
TALL APPLIANCE
HOUSING
2100 high - - - - 0.55 - - - -
2276 high - - - - 0.59 - - - -
CUBIC CAPACITIES (M³) 15MM CABINETS
15MM HIGH PERFORMANCE VISTA CABINETS AND 15MM MOISTURE RESISTANT VISTA CABINETS
15MM HIGH PERFORMANCEVISTA CABINETS
Cabinets are produced from 15mm
melamine faced, high density, fi ne
surface particle board to comply with
BS EN 312-P2. To deter moisture seepage in
to the panels, all exposed edges are lipped
with melamine tape, bonded with machine
applied, hot melt adhesive. Symphony’s
rigid cabinets have been tested to comply
with the requirements of BS 6222 Part 2
Level H. 15mm high performance cabinets
come in a range of colours to the exterior
and lipping and have a white interior.
15MM MOISTURE RESISTANT VISTA CABINETS
High density, fi ne surface 15mm coreboard
to BS EN 312-P3, is used to produce all
cabinet sides, shelves, bases and plinths,
providing improved moisture resistance.
All exposed edges are lipped to prevent
water penetration. Service life is maximised
and maintenance costs reduced by the
enhanced material specifi cation. 15mm
moisture resistant cabinets are available
with a white exterior and interior.
BACKS
To allow services to run behind the units
inset hardboard fi tted backs come as standard.
Backs for 600mm deep modules are inset
by 66mm and 500mm units by 15mm.
FRONTALS
Designed to endure the most demanding
conditions, frontals can be removed and
replaced easily.
DRAWER SYSTEM
The drawer box consists of two metal
sides,a metal back and a 15mm chipboard
base. For high abrasion resistance the metal
sides are coated in enamel. The smooth
action, metal roller system, featuring
parallel guides and built-in drawer stop,
has been independently tested by FIRA and
successfully meets the requirements of BS
6222 Part 2 Level H. Drawer fronts can be
adjusted horizontally and vertically.
SOFTPLUS
SoftPlus is a soft close system available
as an optional extra on 15mm Vista High
Performance and Moisture Resistant
cabinets. SoftPlus is available with a soft
close drawer system and soft close hinges.
HINGES
All metal hinges with three way adjustment
that open to 170° come as standard.
Hinges that open to 110° are an optional
extra. Full alignment can be achieved with
Symphony’s 110° and 170° all metal hinges
which comply fully with BS 6222 Part 2
Level H.
METAL FITTINGS AND WIREWORK
All metal fi ttings and screws are plated.
The wirework provides a tough,
hygienic fi nish.
PLINTHS
To allow easy access to services and for
cleaning, plinths are front fi xed.
SHELF SUPPORTS
Plastic, injection moulded clips are used
to support shelves. A central support is
supplied for all units over 600mm long.
LEGS
Adjustable legs are included (allowing
adjustment from 140mm to 175mm)
enabling easy installation.
LOCKABLE UNITS
For added security lockable base and wall
units are available for a limited door offer.
Locks can be ordered separately. See page 29.
CONSTRUCTION
Cam and dowel construction is used to produce the cabinets which provides optimum rigidity.
HP
MR
- High Performance
- Moisture Resistant
3
2
7
4
15
6
8
9
12
13
11
10
MR
HP
15MM VISTA CABINETS
Fully adjustable drawer front for full alignment
66mm void to rear providing easy installation
around pipework and plumbing
Removable hardboard back allows easy access
should a problem arise after installation
15mm RAL 9001 faced chipboard
drawer base
Durable 3 metal sided Supra drawer box
with self-closing action (available with
SoftPlus drawer box upgrade)
3-way fully adjustable all metal hinge 170° (or
110° option) for full alignment (available with
SoftPlus hinge upgrade).
15mm cabinet - BS EN 312-P2,
to BS EN 312 - P3
Internal cabinet fi nished in white with choice
of external cabinet colours
Cabinet lipped all round to prevent
water ingress
Continuous plinth
Optional plinth dust seal
Adjustable legs provide easy installation
(min. 140mm - max. 175mm)
Cam and dowel construction for extra rigidity
1
75
6
4
3
2
8
* All dimensions in millimetres.
15MM VISTA WALL UNIT SPECIFICATION
3-way fully adjustable all-metal
hinge - 170° (or 110° option) for full
alignment (available with SoftPlus
hinge upgrade)
3 wall unit heights
561mm/724mm/900mm
15mm cabinet - to BS EN 312-P2,
to BS EN 312-P3
Hardboard back with horizontal
fi xing rail
Under shelf support for strength
Internal cabinet fi nished in white with
choice of external cabinet colours
15mm shelving with plastic shelf
support (one shelf 561mm and 724mm
high, two shelves 900mm high)
Co-ordinated front edge lipping to
match external cabinet fi nish
1
2
3
4
5
6
7
8
15MM VISTA BASE UNIT SPECIFICATION
1
2
3
4
5
6
7
8
9
10
11
12
13
Vista Back RailShelf Bracket
Worktop Fixing Bracket
Drawer RunnersRail Fixing
Cam & DowelWall Fixing Bracket
Leg
Drawer Box
SoftPlus 110° Hinge
SoftPlus 170° Hinge
MR
MR
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 6-7 10/05/2012 11:09
98
UNIT DIMENSIONS 300 400 450 500 600 800 900 1000 1200
BASE UNITS 500 deep 0.08 0.11 0.12 0.14 0.17 0.23 - 0.29 0.35
600 deep 0.09 0.12 0.14 0.16 0.20 0.26 0.29 0.34 0.41
WALL UNITS 561 high 0.04 0.05 0.06 0.06 0.08 0.10 0.12 0.13 -
724 high 0.05 0.07 0.08 0.08 0.10 0.14 0.16 0.18 -
900 high 0.06 0.08 0.09 0.10 0.13 0.17 0.19 0.22 -
BROOM LARDER
(2100MM)
500 deep - - - 0.39 0.43 - - - -
600 deep 0.25 - - 0.44 0.52 - - - -
BROOM LARDER
(2276MM)
500 deep - - - 0.42 0.50 - - - -
600 deep 0.30 - - 0.48 0.63 - - - -
ANGLE CORNER
WALL UNITS
561 high - - - - 0.10 - - - -
724 high - - - - 0.13 - - - -
900 high - - - - 0.17 - - -
OVER COOKER
HOOD UNITS
300 high - - - - 0.04 - - - -
TALL APPLIANCE
HOUSING
2100 high - - - - 0.54 - - - -
2276 high - - - - 0.59 - - - -
CUBIC CAPACITIES (M³) 18MM CABINETS
18MM EXCEL CABINETS18MM EXCEL CABINETS
* All dimensions in millimetres.
18MM EXCEL CABINETS
18mm high density, fi ne surface particle
board, which complies with
BS EN 312-P2, is used to produce Excel
cabinet side panels, bases, shelves and
rails. Cabinets are supplied on adjustable
legs and feature concealed adjustable wall
hanging brackets. Vulnerable edges are
lipped to resist moisture seeping into
the panels.
BACKS
To allow services to run behind the units,
inset hardboard fi tted backs come as
standard. Backs for 600mm deep modules
are inset by 66mm and 500mm units
by 15mm.
FRONTALS
Designed to endure the most demanding
conditions, frontals can be removed and
replaced easily.
DRAWER SYSTEM
The drawer box consists of two metal sides,
a metal back and a 15mm chipboard base.
For high abrasion resistance the metal
sides are coated in enamel. The smooth
action metal roller system, featuring
parallel guides and built-in drawer stop,
has been independently tested by FIRA and
successfully meets the requirements of
BS 6222 Part 2 Level H. Drawer fronts can
be adjusted horizontally and vertically.
SOFTPLUS
SoftPlus is a soft close system available as
an optional extra on 18mm Excel. SoftPlus
is available with a soft close drawer system
and soft close hinges.
HINGES
Fully adjustable all metal hinges that
open to 170° come as standard. Hinges
that open to 110° are an optional extra.
Full alignment can be achieved with
Symphony’s 110° and 170° all metal hinges
which comply fully with BS 6222 Part 2
Level H.
METAL FITTINGS AND WIREWORK
All metal fi ttings and screws are plated.
The wirework provides a tough,
hygienic fi nish.
PLINTHS
To allow easy access to services and for
cleaning, plinths are front fi xed.
SHELF SUPPORTS
Metal shelf supports are used for all 18mm
Excel units.
LEGS
Adjustable legs are included (allowing
adjustment from 140mm to 175mm)
enabling easy installation.
LOCKABLE UNITS
For added security lockable base and wall
units are available for a limited door offer.
Locks can be ordered separately. See
page 29.
CONSTRUCTION
Cam and dowel construction is used to
produce the cabinets, which provides
optimum rigidity. Inset fi tted back with void of 66mm for
easy access to pipes and services
15mm chipboard drawer base
Fully adjustable drawer front for
full alignment
Durable 3 metal sided Supra drawer box
with self-closing action (available with
SoftPlus drawer box upgrade)
Cam and dowel construction for
extra rigidity
3-way fully adjustable all-metal hinge for
full alignment - 170° (or 110° option) (Available
with SoftPlus hinge upgrade)
18mm cabinet with interior and exterior
fully co-ordinated
Adjustable legs provide easy installation
(min. 140mm - max. 175mm)
Colour co-ordinated clip on continuous
plinth for fl ush fl oor level fi t
Optional plinth dust seal
Fully co-ordinated front edge lipping
matches cabinet exterior
Wall Fixing BracketWorktop Fixing Bracket
Rail Fixings
Cam & Dowel
Drawer Runners
1
7
23
4
11
65
8
910
Leg
Shelf Bracket
Drawer Box
Concealed fully adjustable wall hanging brackets
One piece unit back
3 wall unit heights 561mm/724mm/900mm
3-way fully adjustable all-metal hinge for
full alignment - 170° (or 110° option)
(Available with SoftPlus hinge upgrade)
18mm cabinet with interior and exterior
fully co-ordinated
18mm shelving (One shelf 561mm high, two shelves
724mm and 900mm high)
Metal shelf supports
Cam & dowel construction for extra rigidity
18MM EXCEL WALL UNITSPECIFICATION
1
2
3
4
5
7
8
6
18MM EXCEL BASE UNITSPECIFICATION
1
2
3
4
5
6
7
8
9
10
11
Wall Hanging Bracket
SoftPlus 110° Hinge
SoftPlus 170° Hinge
1
2
5
3
6
4
7
8
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 8-9 10/05/2012 11:09
98
UNIT DIMENSIONS 300 400 450 500 600 800 900 1000 1200
BASE UNITS 500 deep 0.08 0.11 0.12 0.14 0.17 0.23 - 0.29 0.35
600 deep 0.09 0.12 0.14 0.16 0.20 0.26 0.29 0.34 0.41
WALL UNITS 561 high 0.04 0.05 0.06 0.06 0.08 0.10 0.12 0.13 -
724 high 0.05 0.07 0.08 0.08 0.10 0.14 0.16 0.18 -
900 high 0.06 0.08 0.09 0.10 0.13 0.17 0.19 0.22 -
BROOM LARDER
(2100MM)
500 deep - - - 0.39 0.43 - - - -
600 deep 0.25 - - 0.44 0.52 - - - -
BROOM LARDER
(2276MM)
500 deep - - - 0.42 0.50 - - - -
600 deep 0.30 - - 0.48 0.63 - - - -
ANGLE CORNER
WALL UNITS
561 high - - - - 0.10 - - - -
724 high - - - - 0.13 - - - -
900 high - - - - 0.17 - - -
OVER COOKER
HOOD UNITS
300 high - - - - 0.04 - - - -
TALL APPLIANCE
HOUSING
2100 high - - - - 0.54 - - - -
2276 high - - - - 0.59 - - - -
CUBIC CAPACITIES (M³) 18MM CABINETS
18MM EXCEL CABINETS18MM EXCEL CABINETS
* All dimensions in millimetres.
18MM EXCEL CABINETS
18mm high density, fi ne surface particle
board, which complies with
BS EN 312-P2, is used to produce Excel
cabinet side panels, bases, shelves and
rails. Cabinets are supplied on adjustable
legs and feature concealed adjustable wall
hanging brackets. Vulnerable edges are
lipped to resist moisture seeping into
the panels.
BACKS
To allow services to run behind the units,
inset hardboard fi tted backs come as
standard. Backs for 600mm deep modules
are inset by 66mm and 500mm units
by 15mm.
FRONTALS
Designed to endure the most demanding
conditions, frontals can be removed and
replaced easily.
DRAWER SYSTEM
The drawer box consists of two metal sides,
a metal back and a 15mm chipboard base.
For high abrasion resistance the metal
sides are coated in enamel. The smooth
action metal roller system, featuring
parallel guides and built-in drawer stop,
has been independently tested by FIRA and
successfully meets the requirements of
BS 6222 Part 2 Level H. Drawer fronts can
be adjusted horizontally and vertically.
SOFTPLUS
SoftPlus is a soft close system available as
an optional extra on 18mm Excel. SoftPlus
is available with a soft close drawer system
and soft close hinges.
HINGES
Fully adjustable all metal hinges that
open to 170° come as standard. Hinges
that open to 110° are an optional extra.
Full alignment can be achieved with
Symphony’s 110° and 170° all metal hinges
which comply fully with BS 6222 Part 2
Level H.
METAL FITTINGS AND WIREWORK
All metal fi ttings and screws are plated.
The wirework provides a tough,
hygienic fi nish.
PLINTHS
To allow easy access to services and for
cleaning, plinths are front fi xed.
SHELF SUPPORTS
Metal shelf supports are used for all 18mm
Excel units.
LEGS
Adjustable legs are included (allowing
adjustment from 140mm to 175mm)
enabling easy installation.
LOCKABLE UNITS
For added security lockable base and wall
units are available for a limited door offer.
Locks can be ordered separately. See
page 29.
CONSTRUCTION
Cam and dowel construction is used to
produce the cabinets, which provides
optimum rigidity. Inset fi tted back with void of 66mm for
easy access to pipes and services
15mm chipboard drawer base
Fully adjustable drawer front for
full alignment
Durable 3 metal sided Supra drawer box
with self-closing action (available with
SoftPlus drawer box upgrade)
Cam and dowel construction for
extra rigidity
3-way fully adjustable all-metal hinge for
full alignment - 170° (or 110° option) (Available
with SoftPlus hinge upgrade)
18mm cabinet with interior and exterior
fully co-ordinated
Adjustable legs provide easy installation
(min. 140mm - max. 175mm)
Colour co-ordinated clip on continuous
plinth for fl ush fl oor level fi t
Optional plinth dust seal
Fully co-ordinated front edge lipping
matches cabinet exterior
Wall Fixing BracketWorktop Fixing Bracket
Rail Fixings
Cam & Dowel
Drawer Runners
1
7
23
4
11
65
8
910
Leg
Shelf Bracket
Drawer Box
Concealed fully adjustable wall hanging brackets
One piece unit back
3 wall unit heights 561mm/724mm/900mm
3-way fully adjustable all-metal hinge for
full alignment - 170° (or 110° option)
(Available with SoftPlus hinge upgrade)
18mm cabinet with interior and exterior
fully co-ordinated
18mm shelving (One shelf 561mm high, two shelves
724mm and 900mm high)
Metal shelf supports
Cam & dowel construction for extra rigidity
18MM EXCEL WALL UNITSPECIFICATION
1
2
3
4
5
7
8
6
18MM EXCEL BASE UNITSPECIFICATION
1
2
3
4
5
6
7
8
9
10
11
Wall Hanging Bracket
SoftPlus 110° Hinge
SoftPlus 170° Hinge
1
2
5
3
6
4
7
8
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 8-9 10/05/2012 11:09
1110
UNIT DIMENSIONS 300 400 450 500 600 800 900 1000 1200
BASE UNITS 600 deep 0.07 0.10 0.11 0.12 0.15 - - - -
WALL UNITS 724 high 0.05 0.07 0.08 0.08 0.10 - - - -
BROOM LARDER
(2100MM)
600 deep 0.25 - - 0.44 0.52 - - - -
CUBIC CAPACITIES (M³) 18MM CABINETS
18MM ESPRIT CABINETS18MM ESPRIT CABINETS
* All dimensions in millimetres.
GENERAL INFORMATION
Esprit 18mm rigid cabinets have been
tested to and comply with the requirements
of BS 6222 Part 2 Level H.
18MM CABINET
Side panels, bases, shelves and rails are
manufactured from 18mm high density
chipboard. Vulnerable cabinet edges are
lipped to resist moisture seepage in to the
panels. All chipboard is manufactured to
comply with BS/EN 312-3 (P2).
BACKS
All units have inset hardboard fi tted backs
as standard. Backs are inset by 53mm to
allow services to run behind.
HINGES
As standard, fully adjustable all-metal clip-
on hinges are 170° opening. The hinges
comply fully with BS 6222 Part 2 Level H,
allowing full alignment.
DRAWER SYSTEM
Esprit 18mm metal drawer box system
has a 16mm chipboard base and
quadro runners. The system has been
independently tested by FIRA and
successfully meets the requirements of
BS 6222 Part 2 Level H. The drawer box
is fully extendable and has soft close
pneumatic action.
WALL HANGING BRACKETS
Wall unit support plates and brackets
are made from 3mm steel. The patented
hanging brackets allow 5 levels of
adjustment, up or down the wall, by up to
160mm (Patent no. 88216056 registered
design no. 1053559).
WORKTOP BRACKETS
Worktop brackets are fabricated from 25 x
25mm tubular steel and allow worktops to
be supported from the wall allowing
the same levels of adjustment as wall and
base units.
PLINTH
Tall units are supplied with colour
co-ordinated 15mm clip-on plinth.
ADJUSTABLE LEGS
Tall units are supplied on adjustable legs
providing easy installation.
METAL FITTINGS
All metal fi ttings and screws used in
manufacture are plated.
WIREWORK
All wirework used in the range is chrome,
for a tough, hygienic fi nish.
WORKTOPS
Worktops are FIRA Gold Award certifi ed,
constructed from laminate bonded to
chipboard. Front edges have an application
of wax for extra protection against water
ingress. Back edges are sealed by
wax injection.
SHELF SUPPORTS
18mm Esprit Units have metal shelf supports.
HANDINGS
Many units are described as left or right
handed. Handings should be expressed as
if looking at the unit from the front.
UNIT DIMENSIONS
All dimensions are expressed in millimetres
as shown. Patented hanging brackets allowing 5 levels of adjustment up or down the wall by up to 160mm (Patent no. 88216056, registered design no. 1053559).
Inset fi tted back with void of 53mm for easy access to pipes and services
3-way fully adjustable all-metal clip-on hinge for full alignment - 170°
18mm cabinet with interior and exterior fully co-ordinated
Fully co-ordinated front edge lipping matches cabinet exterior
Cam & dowel construction for extra rigidity
1
2
3
6
7
5
4
1
2
3
4
5
Patented hanging brackets allowing 5 levels of adjustment up or down the wall by up to 160mm (Patent no. 88216056, registered design no. 1053559).
One piece unit back
3-way fully adjustable all-metal clip-on hinge for perfect alignment - 170°
18mm cabinet with interior and exterior fully co-ordinated
18mm shelving (Two shelves on 724mm high)
Metal shelf supports
Cam & dowel construction for extra rigidity
18MM ESPRIT WALL UNITSPECIFICATION
18MM ESPRIT BASE UNIT SPECIFICATION
1
2
3
4
5
6
7
6
1
2
3
4
5
6
Esprit Hanging Bracket
Esprit Unit with Bracket
Esprit Units Mounted on
Brackets
Esprit Drawer Box
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 10-11 10/05/2012 11:10
1110
UNIT DIMENSIONS 300 400 450 500 600 800 900 1000 1200
BASE UNITS 600 deep 0.07 0.10 0.11 0.12 0.15 - - - -
WALL UNITS 724 high 0.05 0.07 0.08 0.08 0.10 - - - -
BROOM LARDER
(2100MM)
600 deep 0.25 - - 0.44 0.52 - - - -
CUBIC CAPACITIES (M³) 18MM CABINETS
18MM ESPRIT CABINETS18MM ESPRIT CABINETS
* All dimensions in millimetres.
GENERAL INFORMATION
Esprit 18mm rigid cabinets have been
tested to and comply with the requirements
of BS 6222 Part 2 Level H.
18MM CABINET
Side panels, bases, shelves and rails are
manufactured from 18mm high density
chipboard. Vulnerable cabinet edges are
lipped to resist moisture seepage in to the
panels. All chipboard is manufactured to
comply with BS/EN 312-3 (P2).
BACKS
All units have inset hardboard fi tted backs
as standard. Backs are inset by 53mm to
allow services to run behind.
HINGES
As standard, fully adjustable all-metal clip-
on hinges are 170° opening. The hinges
comply fully with BS 6222 Part 2 Level H,
allowing full alignment.
DRAWER SYSTEM
Esprit 18mm metal drawer box system
has a 16mm chipboard base and
quadro runners. The system has been
independently tested by FIRA and
successfully meets the requirements of
BS 6222 Part 2 Level H. The drawer box
is fully extendable and has soft close
pneumatic action.
WALL HANGING BRACKETS
Wall unit support plates and brackets
are made from 3mm steel. The patented
hanging brackets allow 5 levels of
adjustment, up or down the wall, by up to
160mm (Patent no. 88216056 registered
design no. 1053559).
WORKTOP BRACKETS
Worktop brackets are fabricated from 25 x
25mm tubular steel and allow worktops to
be supported from the wall allowing
the same levels of adjustment as wall and
base units.
PLINTH
Tall units are supplied with colour
co-ordinated 15mm clip-on plinth.
ADJUSTABLE LEGS
Tall units are supplied on adjustable legs
providing easy installation.
METAL FITTINGS
All metal fi ttings and screws used in
manufacture are plated.
WIREWORK
All wirework used in the range is chrome,
for a tough, hygienic fi nish.
WORKTOPS
Worktops are FIRA Gold Award certifi ed,
constructed from laminate bonded to
chipboard. Front edges have an application
of wax for extra protection against water
ingress. Back edges are sealed by
wax injection.
SHELF SUPPORTS
18mm Esprit Units have metal shelf supports.
HANDINGS
Many units are described as left or right
handed. Handings should be expressed as
if looking at the unit from the front.
UNIT DIMENSIONS
All dimensions are expressed in millimetres
as shown. Patented hanging brackets allowing 5 levels of adjustment up or down the wall by up to 160mm (Patent no. 88216056, registered design no. 1053559).
Inset fi tted back with void of 53mm for easy access to pipes and services
3-way fully adjustable all-metal clip-on hinge for full alignment - 170°
18mm cabinet with interior and exterior fully co-ordinated
Fully co-ordinated front edge lipping matches cabinet exterior
Cam & dowel construction for extra rigidity
1
2
3
6
7
5
4
1
2
3
4
5
Patented hanging brackets allowing 5 levels of adjustment up or down the wall by up to 160mm (Patent no. 88216056, registered design no. 1053559).
One piece unit back
3-way fully adjustable all-metal clip-on hinge for perfect alignment - 170°
18mm cabinet with interior and exterior fully co-ordinated
18mm shelving (Two shelves on 724mm high)
Metal shelf supports
Cam & dowel construction for extra rigidity
18MM ESPRIT WALL UNITSPECIFICATION
18MM ESPRIT BASE UNIT SPECIFICATION
1
2
3
4
5
6
7
6
1
2
3
4
5
6
Esprit Hanging Bracket
Esprit Unit with Bracket
Esprit Units Mounted on
Brackets
Esprit Drawer Box
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 10-11 10/05/2012 11:10
13
1000mm
12
ESPRIT PLANNING AND INSTALLATIONESPRIT PLANNING AND INSTALLATION
Measure 1000mm from the fl oor and mark this point on the wall.
Using a spirit level, draw a horizontal line around the walls from
this point. This is the datum line.
Before fi xing the hanging plates to the wall, measure and mark
the end position for the base units, wall units and worktop ends.
This is where the hanging plates will end - some hanging plates
may need to be cut down.
Where the smallest measurement is taken measure up from the
fl oor, 705mm. Create a new level datum line from this point.
Wall units, base units and worktop support brackets can now be
lifted onto the wall hanging plates. Please refer to ‘Step 3’ for
height settings.
From this datum line, measure down at various points, calculating
the highest point of the fl oor from the smallest measurement.
Fix the wall hanging plates with the pre-drilled screw holes in line
with the datum lines drawn in fi g 1.3 & 1.4.
Cut down any overlapping hanging plates inline with end
markings made in fi g. 2.1.
For the positioning of wall units, measure up 1192mm from the
new datum line and create a second level datum line.
With all the wall units, base units and worktop support brackets in
position check the levels before commencing. Adjust levels using
the methods shown in ‘Step 3’.
STEP 1: DATUMS AND DIMENSIONS STEP 2: PLANNING AND FITTING
Having checked the plot for level and square, commence by marking a level datum line on the wall around the
base unit area. The datum line will provide a level mark for positioning the hanging brackets for wall units, base
units and worktops.
Note: For safety reasons, please ensure that wall hanging plates are screwed securely into a solid wall or battening in the wall. Never
bend wall hanging plates to fi t an uneven wall, if necessary use metal washers between the wall and hanging bracket. Fix hanging plates
using 2” No. 10 screws and plugs.
1000mm
1.1 2.11.2 2.2
705mm
1192mm
705mm
1.3 2.31.4 2.4
PLUMBING AND ELECTRICAL CONNECTIONS:
Height adjustment of units will be impaired if plumbing and
electrical installations are not made correctly. Taps are supplied
with fl exible hose connections. We strongly recommend that
fl exible hosing is used for all wastes and plumbing work to allow
for maximum adjustment.
TILING AND DECORATION:
Tiling and decoration should be completed and dry prior to fi xing
of wall hanging plates. It is recommended that wall hanging plates
are fi xed on top of tiles. Tiles should therefore start at 650mm
from the fl oor and extend to 1800mm.
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 12-13 10/05/2012 11:10
13
1000mm
12
ESPRIT PLANNING AND INSTALLATIONESPRIT PLANNING AND INSTALLATION
Measure 1000mm from the fl oor and mark this point on the wall.
Using a spirit level, draw a horizontal line around the walls from
this point. This is the datum line.
Before fi xing the hanging plates to the wall, measure and mark
the end position for the base units, wall units and worktop ends.
This is where the hanging plates will end - some hanging plates
may need to be cut down.
Where the smallest measurement is taken measure up from the
fl oor, 705mm. Create a new level datum line from this point.
Wall units, base units and worktop support brackets can now be
lifted onto the wall hanging plates. Please refer to ‘Step 3’ for
height settings.
From this datum line, measure down at various points, calculating
the highest point of the fl oor from the smallest measurement.
Fix the wall hanging plates with the pre-drilled screw holes in line
with the datum lines drawn in fi g 1.3 & 1.4.
Cut down any overlapping hanging plates inline with end
markings made in fi g. 2.1.
For the positioning of wall units, measure up 1192mm from the
new datum line and create a second level datum line.
With all the wall units, base units and worktop support brackets in
position check the levels before commencing. Adjust levels using
the methods shown in ‘Step 3’.
STEP 1: DATUMS AND DIMENSIONS STEP 2: PLANNING AND FITTING
Having checked the plot for level and square, commence by marking a level datum line on the wall around the
base unit area. The datum line will provide a level mark for positioning the hanging brackets for wall units, base
units and worktops.
Note: For safety reasons, please ensure that wall hanging plates are screwed securely into a solid wall or battening in the wall. Never
bend wall hanging plates to fi t an uneven wall, if necessary use metal washers between the wall and hanging bracket. Fix hanging plates
using 2” No. 10 screws and plugs.
1000mm
1.1 2.11.2 2.2
705mm
1192mm
705mm
1.3 2.31.4 2.4
PLUMBING AND ELECTRICAL CONNECTIONS:
Height adjustment of units will be impaired if plumbing and
electrical installations are not made correctly. Taps are supplied
with fl exible hose connections. We strongly recommend that
fl exible hosing is used for all wastes and plumbing work to allow
for maximum adjustment.
TILING AND DECORATION:
Tiling and decoration should be completed and dry prior to fi xing
of wall hanging plates. It is recommended that wall hanging plates
are fi xed on top of tiles. Tiles should therefore start at 650mm
from the fl oor and extend to 1800mm.
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 12-13 10/05/2012 11:10
1514
ADJUSTMENT AND FIXING - ELECTRONICADJUSTMENT AND FIXING - MANUAL
NB: Fixing positions A & B require a fi rm seating position on a solid wall or battening in the wall.
NB: Tall units should be levelled on the fl oor and fi xed to the wall in accordance with fi tting instructions for standard 18mm units
available. All dimensions in millimetres.
All dimensions in millimetres.
All dimensions in millimetres.
Please use the illustrations here as a guide to fi xing positions and adjustment. Instructions for fi tting and construction are supplied with
the products. Note: For safety reasons, please ensure all fi xings are screwed securely into a solid wall or battening in the wall.
STEP 3: FINAL ADJUSTMENT AND FIXING ADJUSTABLE WORKTOP
ADJUSTABLE WALL UNITS
Set support brackets at the desired position before fi tting worktops. Hanging brackets allow fi ve levels of
adjustment between minimum and maximum in 40mm increments. Further adjustment is made by turning the
adjuster screw at the bottom of the units with a 19mm spanner.
Tall Unit Height
2100
Wall Hanging Plate
Fixing Position
1897
Adjustment
160mm
Adjustment
160mm
Wall Hanging Plate
Fixing Position
705
Max
939Min
779
AdjustmentA
A
C C
D
B
Adjustment
160mm
Max
2100
Max
939
Min
1940
Min
779
Wall Hanging
Plate Fixing
Position
705
1192
B
A
FixingC D
x2
Wall Unit
Extension*
520
338
*Actual Carcase Depth
Wall Units = 325
Adjustable Base Units = 557
Fixed Tall Units = 570
210
0 1954
146
561
724
304
50
Ad
just
able
Ad
just
ableM
in 7
60
Ho
b -
Ho
od
Plinth Position
Carcase Extension*
Worktop Extension
570
600
3.1
3.2
11
8
46
3 Min
66
0
Max
96
0
63
0
47
5
34
5
93
0
Ad
just
me
nt
30
0m
m
Worktop Depth
Min 590mm
Max 620mm
Worktop Length
Min 950mm
Max 1950mm
Distance Plates(Spaces to avoid
skirting boards)
5mm Gap
Behind Worktops
Leg
WorktopAlu
Support Bar
Foot60
70
579
Ad
just
me
nt
42
8M
ax 2
10
0
Min
16
72
Mounting
Frame
Mounting
Frame
560
1320
70
0
75
100
108
352
33
2
13
76
Wall Unit
Outline
Wal
l U
nit
He
igh
t 7
24
mm
90
8
13
93
33
23
32
17
252
05
7
400
179115
Wall Units Width 1500mm
325
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 14-15 10/05/2012 11:10
1514
ADJUSTMENT AND FIXING - ELECTRONICADJUSTMENT AND FIXING - MANUAL
NB: Fixing positions A & B require a fi rm seating position on a solid wall or battening in the wall.
NB: Tall units should be levelled on the fl oor and fi xed to the wall in accordance with fi tting instructions for standard 18mm units
available. All dimensions in millimetres.
All dimensions in millimetres.
All dimensions in millimetres.
Please use the illustrations here as a guide to fi xing positions and adjustment. Instructions for fi tting and construction are supplied with
the products. Note: For safety reasons, please ensure all fi xings are screwed securely into a solid wall or battening in the wall.
STEP 3: FINAL ADJUSTMENT AND FIXING ADJUSTABLE WORKTOP
ADJUSTABLE WALL UNITS
Set support brackets at the desired position before fi tting worktops. Hanging brackets allow fi ve levels of
adjustment between minimum and maximum in 40mm increments. Further adjustment is made by turning the
adjuster screw at the bottom of the units with a 19mm spanner.
Tall Unit Height
2100
Wall Hanging Plate
Fixing Position
1897
Adjustment
160mm
Adjustment
160mm
Wall Hanging Plate
Fixing Position
705
Max
939Min
779
AdjustmentA
A
C C
D
B
Adjustment
160mm
Max
2100
Max
939
Min
1940
Min
779
Wall Hanging
Plate Fixing
Position
705
1192
B
A
FixingC D
x2
Wall Unit
Extension*
520
338
*Actual Carcase Depth
Wall Units = 325
Adjustable Base Units = 557
Fixed Tall Units = 570
210
0 1954
146
561
724
304
50
Ad
just
able
Ad
just
ableM
in 7
60
Ho
b -
Ho
od
Plinth Position
Carcase Extension*
Worktop Extension
570
600
3.1
3.2
11
8
46
3 Min
66
0
Max
96
0
63
0
47
5
34
5
93
0
Ad
just
me
nt
30
0m
m
Worktop Depth
Min 590mm
Max 620mm
Worktop Length
Min 950mm
Max 1950mm
Distance Plates(Spaces to avoid
skirting boards)
5mm Gap
Behind Worktops
Leg
WorktopAlu
Support Bar
Foot60
70
579
Ad
just
me
nt
42
8M
ax 2
10
0
Min
16
72
Mounting
Frame
Mounting
Frame
560
1320
70
0
75
100
108
352
33
2
13
76
Wall Unit
Outline
Wal
l U
nit
He
igh
t 7
24
mm
90
8
13
93
33
23
32
17
252
05
7
400
179115
Wall Units Width 1500mm
325
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 14-15 10/05/2012 11:10
1716
PRODUCT AVAILABILITY MATRIXPRODUCT AVAILABILITY MATRIX
RANGE HINGES CABINET THICKNESS
CABINET COLOUR DRAWERBOX SOFT CLOSE DOORS
VISTA STANDARD 170 15mm colour exterior/white interior Supra No
VISTA STANDARD 110 15mm colour exterior/white interior Supra No
VISTA SOFT PLUS 170 15mm colour exterior/white interior Supra SoftPlus Yes
VISTA SOFT PLUS 110 15mm colour exterior/white interior Supra SoftPlus Yes
EXCEL STANDARD 170 18mm colour co-ordinated interior & exterior Supra No
EXCEL STANDARD 110 18mm colour co-ordinated interior & exterior Supra No
EXCEL SOFT PLUS* 170 18mm colour co-ordinated interior & exterior Supra SoftPlus Yes
EXCEL SOFT PLUS* 110 18mm colour co-ordinated interior & exterior Supra SoftPlus Yes
ESPRIT 170 18mm colour co-ordinated interior & exterior Revo Yes
RANGE COLOUR 18MM EXCEL CABINET(INTERIOR & EXTERIOR)
18MM EXCEL CORNER POST
15MM VISTA CABINET (EXTERIOR & EDGING)
15MM VISTA CORNER POST
15MM VISTA P3 MOISTURE RESISTANT CABINET
18MM ESPRIT CABINET
READY FOR ASSEMBLY
AINSDALE White White White White White White n/a n/a
ARLINGTON Dijon Walnut Mezzo Dijon Walnut Mezzo Mezzo n/a n/a n/a
BOSTON White* White White White White n/a White, Pear, Walnut n/a
BRAEMAR Oak Oak Oak White or Oak White or Oak White n/a Yes
BROMLEY Pear* Pear Pear Pear or White Pear or White White Pear Yes
BROMLEY Oak* Oak Oak Oak or White Oak or White White Oak Yes
CALGARY Pear or Apple* Pear Pear White or Pear White or Pear White Pear n/a
CALGARY White White White White White White n/a n/a
GALWAY Pear*, Apple* or Green Alder* White, Pear or Ivory Pear White, Pear or Ivory White, Pear or Ivory White Pear Yes
GEORGIA Mezzo Mezzo Mezzo Mezzo Mezzo n/a n/a n/a
GEORGIA Maple Pear Maple Pear Pear n/a n/a n/a
GEORGIA Oak Oak Oak Oak Oak n/a n/a n/a
GEORGIA Walnut Walnut Walnut Walnut Walnut n/a n/a n/a
HACIENDA White Ash* White White Ash White White White White n/a
HACIENDA Champagne Ivory or Walnut Champagne Ivory or Walnut Ivory or Walnut White n/a n/a
HACIENDA Ivory Ivory or Walnut Ivory Ivory or Walnut Ivory or Walnut White n/a n/a
HUDSON Oak* n/a n/a n/a n/a n/a Oak n/a
MEDFORD White White White White White White White n/a
MIAMI Walnut Walnut Walnut Walnut Walnut n/a n/a n/a
MIAMI Pear Pear Pear Pear Pear n/a n/a n/a
MIAMI Mezzo Mezzo Mezzo Mezzo Mezzo n/a n/a n/a
OAKLAND Slate* White or Ivory Slate White or Ivory White or Ivory White White n/a
OAKLAND Stone White or Ivory Stone White or Ivory White or Ivory White n/a n/a
OAKLAND Taupe White or Ivory Taupe White or Ivory White or Ivory White n/a n/a
OREGON White* White or Walnut White or Walnut White White White White, Pear or Walnut Yes
OREGON Dove Grey White or Walnut White or Walnut White White White n/a Yes
OREGON Cream* Pear, Walnut or Ivory Pear, Walnut or Ivory Pear or Ivory Pear or Ivory White Pear Yes
OREGON Barley Pear, Walnut or Ivory Pear, Walnut or Ivory Pear or Ivory Pear or Ivory White n/a Yes
PASADENA Maple* Pear Pear Pear Pear White Pear or White n/a
PASADENA Oak* Oak Oak Oak Oak White Oak, Pear or White n/a
TULSA Sand Zebrano, Romana Cherry or Chateau Oak Romana
Pear or Ivory Pear Pear or Ivory Pear or Ivory n/a n/a n/a
VIRGINIA Walnut* Walnut Walnut Walnut Walnut n/a Walnut Yes
VIRGINIA Maple* Pear Maple Pear Pear n/a Pear Yes
WESTPORT White White White White White White n/a n/a
WESTPORT Ivory Ivory Ivory Ivory Ivory n/a n/a n/a
WOODBURY White White White White White White n/a n/a
WOODBURY Ivory Ivory Ivory Ivory Ivory White n/a n/a
TALL UNIT 720 WALL UNIT
900 WALL UNIT
560 WALL UNIT
SINGLE BASE UNIT
DOUBLE BASE UNIT
BRIDGING UNIT
DRAWERPACK
Kubix maintains a rigorously high standard at all levels. From design to production methods, we provide quality kitchens which are built to last, each one conforming to the high standards of our quality assurance programme.
Choice and fl exibility are key and we are continually expanding our range to provide even greater scope for meeting our clients’/customers’ design and capacity requirements. We are dedicated to providing you with premium products in compliance with market requirements. ELEVATIONS
USAGE GUIDANCE AND ORDERING CHECKLISTS
This guide has been created to
provide you with an overview
of Kubix’s product specifi cation.
Details of availability,
construction, capacity and
dimensions are shown for
base and wall units along with
tall units, appliance housings
and over cooker hoods.
Specifi cations for worktops,
accessories and self assembly
are also available along with
advice on ordering, storage
and maintenance to enable
hassle free installation and
maintenance.
ORDERING CHECK LIST
Below is a list of the information we will
require in order to supply your exact
requirements.
UNITS
• Provide range and fi nish e.g. Range/
Cabinet colour/Door colour.
• State 15mm Vista standard, 15mm Vista
MR standard or 18mm Excel standard. If
soft close is required, please state 15mm
Vista SoftPlus, 15mm Vista MR SoftPlus
or 18mm Excel SoftPlus.
• Confi rm your handle/trim option where
appropriate.
• Provide the full unit code for each item.
• Confi rm the required unit handings
where appropriate. Please see the note
on page 4.
• If you require 110° hinges (which are
an optional extra), please specify. 170°
hinges (for both 15mm Vista and 18mm
Excel) will be supplied as standard.
• Corner base units – ensure that the
appropriate codes for style and variations
have been supplied.
• Appliance housings – the manufacturer’s
name and model number of the
appliance to be specifi ed along with the
aperture size if known.
WORKTOPS
• Provide the style, colour, thickness
and length required. See page 32 for
details.
• If you require Moisture Resistant
Worktops (BS EN 312-P3), please advise.
• If your design is complicated please
include a detailed plan showing
dimensions, cut out positions and sizes
and places where worktops abut.
• Should you need Mason Mitre Joints,
Please contact your local Symphony
representative or call Symphony’s
Building Division Sales Offi ce on
01226 446000.
SINKTOPS
• Provide the unit code, the handing of
the drainer and the colour required (if
applicable).
• Waste and overfl ow kits – specify
if required.
• Accessory packs – specify if required
TAPS
• Specify style, code and colour (if
applicable).
FOR ALL ORDERS
• Provide full details of the delivery site
address, including the development
name (where appropriate) and an on site
contact name and phone number.
• State your required week commencing
delivery date.
• Provide your Symphony C.A.D. drawing
number (if applicable) and quotation
reference number.
PLEASE NOTE:
• Symphony units are designed to
incorporate an offset corner post to
avoid handle clash. An added allowance
for fl oor space is required. If overlooked,
this may result in problems on site. See
page 19 for details.
• Illustrations in this booklet are intended
as a representation only and are not
necessarily correctly
scaled, proportioned or detailed.
• All sizes given are nominal. If exact unit,
door or other dimensions are required
please contact your local Symphony
representative or call Symphony’s
Building Division Sales Offi ce on
01226 446000.
• All units are manufactured within
industry standards for dimensional
tolerance.
Should you require any further information
or assistance please contact your
local Symphony representative or call
Symphony’s Building Division Sales Offi ce
on 01226 446000.
*Available in Esprit
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 16-17 10/05/2012 11:10
1716
PRODUCT AVAILABILITY MATRIXPRODUCT AVAILABILITY MATRIX
RANGE HINGES CABINET THICKNESS
CABINET COLOUR DRAWERBOX SOFT CLOSE DOORS
VISTA STANDARD 170 15mm colour exterior/white interior Supra No
VISTA STANDARD 110 15mm colour exterior/white interior Supra No
VISTA SOFT PLUS 170 15mm colour exterior/white interior Supra SoftPlus Yes
VISTA SOFT PLUS 110 15mm colour exterior/white interior Supra SoftPlus Yes
EXCEL STANDARD 170 18mm colour co-ordinated interior & exterior Supra No
EXCEL STANDARD 110 18mm colour co-ordinated interior & exterior Supra No
EXCEL SOFT PLUS* 170 18mm colour co-ordinated interior & exterior Supra SoftPlus Yes
EXCEL SOFT PLUS* 110 18mm colour co-ordinated interior & exterior Supra SoftPlus Yes
ESPRIT 170 18mm colour co-ordinated interior & exterior Revo Yes
RANGE COLOUR 18MM EXCEL CABINET(INTERIOR & EXTERIOR)
18MM EXCEL CORNER POST
15MM VISTA CABINET (EXTERIOR & EDGING)
15MM VISTA CORNER POST
15MM VISTA P3 MOISTURE RESISTANT CABINET
18MM ESPRIT CABINET
READY FOR ASSEMBLY
AINSDALE White White White White White White n/a n/a
ARLINGTON Dijon Walnut Mezzo Dijon Walnut Mezzo Mezzo n/a n/a n/a
BOSTON White* White White White White n/a White, Pear, Walnut n/a
BRAEMAR Oak Oak Oak White or Oak White or Oak White n/a Yes
BROMLEY Pear* Pear Pear Pear or White Pear or White White Pear Yes
BROMLEY Oak* Oak Oak Oak or White Oak or White White Oak Yes
CALGARY Pear or Apple* Pear Pear White or Pear White or Pear White Pear n/a
CALGARY White White White White White White n/a n/a
GALWAY Pear*, Apple* or Green Alder* White, Pear or Ivory Pear White, Pear or Ivory White, Pear or Ivory White Pear Yes
GEORGIA Mezzo Mezzo Mezzo Mezzo Mezzo n/a n/a n/a
GEORGIA Maple Pear Maple Pear Pear n/a n/a n/a
GEORGIA Oak Oak Oak Oak Oak n/a n/a n/a
GEORGIA Walnut Walnut Walnut Walnut Walnut n/a n/a n/a
HACIENDA White Ash* White White Ash White White White White n/a
HACIENDA Champagne Ivory or Walnut Champagne Ivory or Walnut Ivory or Walnut White n/a n/a
HACIENDA Ivory Ivory or Walnut Ivory Ivory or Walnut Ivory or Walnut White n/a n/a
HUDSON Oak* n/a n/a n/a n/a n/a Oak n/a
MEDFORD White White White White White White White n/a
MIAMI Walnut Walnut Walnut Walnut Walnut n/a n/a n/a
MIAMI Pear Pear Pear Pear Pear n/a n/a n/a
MIAMI Mezzo Mezzo Mezzo Mezzo Mezzo n/a n/a n/a
OAKLAND Slate* White or Ivory Slate White or Ivory White or Ivory White White n/a
OAKLAND Stone White or Ivory Stone White or Ivory White or Ivory White n/a n/a
OAKLAND Taupe White or Ivory Taupe White or Ivory White or Ivory White n/a n/a
OREGON White* White or Walnut White or Walnut White White White White, Pear or Walnut Yes
OREGON Dove Grey White or Walnut White or Walnut White White White n/a Yes
OREGON Cream* Pear, Walnut or Ivory Pear, Walnut or Ivory Pear or Ivory Pear or Ivory White Pear Yes
OREGON Barley Pear, Walnut or Ivory Pear, Walnut or Ivory Pear or Ivory Pear or Ivory White n/a Yes
PASADENA Maple* Pear Pear Pear Pear White Pear or White n/a
PASADENA Oak* Oak Oak Oak Oak White Oak, Pear or White n/a
TULSA Sand Zebrano, Romana Cherry or Chateau Oak Romana
Pear or Ivory Pear Pear or Ivory Pear or Ivory n/a n/a n/a
VIRGINIA Walnut* Walnut Walnut Walnut Walnut n/a Walnut Yes
VIRGINIA Maple* Pear Maple Pear Pear n/a Pear Yes
WESTPORT White White White White White White n/a n/a
WESTPORT Ivory Ivory Ivory Ivory Ivory n/a n/a n/a
WOODBURY White White White White White White n/a n/a
WOODBURY Ivory Ivory Ivory Ivory Ivory White n/a n/a
TALL UNIT 720 WALL UNIT
900 WALL UNIT
560 WALL UNIT
SINGLE BASE UNIT
DOUBLE BASE UNIT
BRIDGING UNIT
DRAWERPACK
Kubix maintains a rigorously high standard at all levels. From design to production methods, we provide quality kitchens which are built to last, each one conforming to the high standards of our quality assurance programme.
Choice and fl exibility are key and we are continually expanding our range to provide even greater scope for meeting our clients’/customers’ design and capacity requirements. We are dedicated to providing you with premium products in compliance with market requirements. ELEVATIONS
USAGE GUIDANCE AND ORDERING CHECKLISTS
This guide has been created to
provide you with an overview
of Kubix’s product specifi cation.
Details of availability,
construction, capacity and
dimensions are shown for
base and wall units along with
tall units, appliance housings
and over cooker hoods.
Specifi cations for worktops,
accessories and self assembly
are also available along with
advice on ordering, storage
and maintenance to enable
hassle free installation and
maintenance.
ORDERING CHECK LIST
Below is a list of the information we will
require in order to supply your exact
requirements.
UNITS
• Provide range and fi nish e.g. Range/
Cabinet colour/Door colour.
• State 15mm Vista standard, 15mm Vista
MR standard or 18mm Excel standard. If
soft close is required, please state 15mm
Vista SoftPlus, 15mm Vista MR SoftPlus
or 18mm Excel SoftPlus.
• Confi rm your handle/trim option where
appropriate.
• Provide the full unit code for each item.
• Confi rm the required unit handings
where appropriate. Please see the note
on page 4.
• If you require 110° hinges (which are
an optional extra), please specify. 170°
hinges (for both 15mm Vista and 18mm
Excel) will be supplied as standard.
• Corner base units – ensure that the
appropriate codes for style and variations
have been supplied.
• Appliance housings – the manufacturer’s
name and model number of the
appliance to be specifi ed along with the
aperture size if known.
WORKTOPS
• Provide the style, colour, thickness
and length required. See page 32 for
details.
• If you require Moisture Resistant
Worktops (BS EN 312-P3), please advise.
• If your design is complicated please
include a detailed plan showing
dimensions, cut out positions and sizes
and places where worktops abut.
• Should you need Mason Mitre Joints,
Please contact your local Symphony
representative or call Symphony’s
Building Division Sales Offi ce on
01226 446000.
SINKTOPS
• Provide the unit code, the handing of
the drainer and the colour required (if
applicable).
• Waste and overfl ow kits – specify
if required.
• Accessory packs – specify if required
TAPS
• Specify style, code and colour (if
applicable).
FOR ALL ORDERS
• Provide full details of the delivery site
address, including the development
name (where appropriate) and an on site
contact name and phone number.
• State your required week commencing
delivery date.
• Provide your Symphony C.A.D. drawing
number (if applicable) and quotation
reference number.
PLEASE NOTE:
• Symphony units are designed to
incorporate an offset corner post to
avoid handle clash. An added allowance
for fl oor space is required. If overlooked,
this may result in problems on site. See
page 19 for details.
• Illustrations in this booklet are intended
as a representation only and are not
necessarily correctly
scaled, proportioned or detailed.
• All sizes given are nominal. If exact unit,
door or other dimensions are required
please contact your local Symphony
representative or call Symphony’s
Building Division Sales Offi ce on
01226 446000.
• All units are manufactured within
industry standards for dimensional
tolerance.
Should you require any further information
or assistance please contact your
local Symphony representative or call
Symphony’s Building Division Sales Offi ce
on 01226 446000.
*Available in Esprit
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 16-17 10/05/2012 11:10
18 19
Single Base Unit•Full height doorOne door, one shelf
Single Base Unit - Lockable†•Full height doorOne door, one shelf
Single Base Unit•Drawer Line:One door, one drawer, one shelf
WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP
300 BU35F BU36F400 BU45F BU46F450 N/A BU456F500 BU55F BU56F600 BU65F BU66F
300 BU35FLK BU36FLK400 BU45FLK BU46FLK500 BU55FLK BU56FLK600 BU65FLK BU66FLK
300 BU35D BU36D400 BU45D BU46D450 N/A BU456D500 BU55D BU56D600 BU65D BU66D
Single Sink Base Unit•Full height door,one shelf, one sinkliner
Double Sink Base UnitTwo full height doors, one shelf, one sinkliner
Single Sink Base UnitOne door, dummy drawerone shelf, one sinkliner
WIDTH 600 DEEP WIDTH 600 DEEP WIDTH 600 DEEP
500 SU56SLF 600 SU66SLF
800 SU86SLF 900 SU96SLF 1000 SU106SLF 1200 SU126SLF
500 SU56SLD600 SU66SLD
Double Sink Base UnitDrawer Line: two doors, one working drawer, one dummy drawer, one shelf, one sinkliner
Double Sink Base UnitDrawer Line: two doors, two dummy drawers, one shelf, one sinkliner
WIDTH 600 DEEP WIDTH 600 DEEP
900 SU96SLDAC1000 SU106SLDAC1200 SU126SLDAC
900 SU96SLDAI1000 SU106SLDAI1200 SU126SLDAI
Drawer Base UnitFour drawers
Pan Drawer Base UnitOne drawer, two pull-outpan drawers
Built-under Oven HousingSupplied with a co-ordinatingfascia panel 120mm high.When fitting a built-under oven refer to the appliance manufacturer’s instructions regarding installation.
WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP
400 N/A DU46D500 DU55D DU56D600 DU65D DU66D
600 N/A PD66D3 600 N/A BOH66
Built-under Oven Housingwith Plinth DrawerSupplied ready for assembly with drawer.When fitting a built-under oven refer to the appliance manufacturer’s instructions regarding installation.
Double Base UnitFull height door,two doors, one shelf
Double Base UnitDrawer Line: two doors,two drawers, one shelf
WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP
600 N/A BOH66D 800 BU85F BU86F900 N/A BU96F1000 BU105F BU106F1200 BU125F BU126F
800 BU85D BU86D900 N/A BU96D1000 BU105D BU106D1200 BU125D BU126D
•Single base units can be hinged left or right. Please specify when ordering. For an explanation of handing, see page 4.†Lockable units are available for a limited door offer only - locks can be ordered separately. See page 29. Not all handles are compatible with lockable units - please refer to your Symphony Representative for further details.
•Single base units can be hinged left or right. Please specify when ordering. For an explanation of handing, see page 4.
VISTA AND EXCEL BASE UNITS VISTA AND EXCEL SINK AND HOB UNITS WITH SINKLINER
870
870
870
870
870
870
870
870870
870870
Single Base Unit•Full height door,one shelf
Double Sink Base UnitTwo full height doors,one shelf
Single Sink Base Unit•One door, dummy drawerone shelf
WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP
500 BU55F BU56F600 BU65F BU66F
1000 BU105F BU106F1200 BU125F BU126F
500 BU55DDD BU56DDD600 BU65DDD BU66DDD
Double Sink Base Unit*Drawer Line: two doors, one working drawer, one dummy drawer, one shelf
Double Sink Base UnitDrawer Line: two doors, two dummy drawers, one shelf
Pan Drawer Hob UnitOne dummy drawer, two pan drawers
WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP
1000 SU105D SU106D1200 SU125D SU126D
800 BU85DAI BU86DAI1000 SU105DAI SU106DAI1200 SU125DAI SU126DAI
600 N/A PD66D3DD
VISTA AND EXCEL SINK AND HOB UNITS WITHOUT SINKLINER
870
870870
870
870
Sink units are designed to support a sinktop or a worktop with an inset sink. The full length of a sit-on sinktop must be supported by units. Drainers of inset sinktops may be positioned over voids provided that the worktop is adequately supported. Please specify the drainer position of units marked*.•Single base units can be hinged left or right. Please specify when ordering.
All dimensions in millimetres.
Style A Style B Style C
WIDTH DEPTH FULL HEIGHT DRAWER DOOR LINE
WIDTH DEPTH FULL HEIGHT DRAWER DOOR LINE
WIDTH DEPTH FULL HEIGHT DRAWER DOOR LINE
800 500 CB85FA CB85DA800 600 CB86FA CB86DA
800 500 CB85FB CB85DB800 600 CB86FB CB86DB
800 500 CB85FC CB85DC800 600 CB86FC CB86DC
Style A Style A Style B
WIDTH DEPTH FULL HEIGHT DRAWER DOOR LINE
WIDTH DEPTH FULL HEIGHT DRAWER DOOR LINE
WIDTH DEPTH FULL HEIGHT DRAWER DOOR LINE
900 600 CB96FA CB96DA 1000 500 CB105FA CB105DA1000 600 CB106FA CB106DA
1000 500 CB105FB CB105DB1000 600 CB106FB CB106DB
1200mm CBU L-Shape CBU(Shelf Unit)
Supplied in 1 x assembledand 1 x ready for assembly parts
L-Shape CBU(Carousel Unit)
Supplied in 1 x assembledand 1 x ready for assembly parts
WIDTH DEPTH FULL HEIGHT DRAWER DOOR LINE
SIZE FULL HEIGHT DRAWER DOOR LINE
SIZE FULL HEIGHT DRAWER DOOR LINE
1200 500 CB125F CB125D1200 600 CB126F CB126D
930 X 930 LSB99F LSB99D 930 X 930 LCB99F LCB99D
Kubix’s range of corner base units allows wide fl exibility in the positioning of corner units for the clearance of water or soil vent pipes when required. Depending on the blanking panel/door combinations specifi ed, corner base units can be positioned 30mm, 130mm, 180mm, 230mm or 330mm from the return wall in order to join with either a 500mm or 600mm deep base unit. Please specify the handing of the blanking panel side when ordering. For an explanation of handing see page 4. NB: if utilising 500mm wide units the overall space required for the corner base unit will be reduced by 100mm. All dimensions in millimetres.
VISTA AND EXCEL CORNER BASE UNITS
400Door
1030
340Blank
230mm Gap
300Door
930
540Blank
130mm Gap
240Blank
500Door
1130
330mm Gap
500Door
1130
540Blank
130mm Gap
1030
400Door
540Blank
30mm Gap
450Door
930
180mm Gap
390Blank
600Door
1230
30mm Gap
600Blank
870
870
870
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 18-19 10/05/2012 11:10
18 19
Single Base Unit•Full height doorOne door, one shelf
Single Base Unit - Lockable†•Full height doorOne door, one shelf
Single Base Unit•Drawer Line:One door, one drawer, one shelf
WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP
300 BU35F BU36F400 BU45F BU46F450 N/A BU456F500 BU55F BU56F600 BU65F BU66F
300 BU35FLK BU36FLK400 BU45FLK BU46FLK500 BU55FLK BU56FLK600 BU65FLK BU66FLK
300 BU35D BU36D400 BU45D BU46D450 N/A BU456D500 BU55D BU56D600 BU65D BU66D
Single Sink Base Unit•Full height door,one shelf, one sinkliner
Double Sink Base UnitTwo full height doors, one shelf, one sinkliner
Single Sink Base UnitOne door, dummy drawerone shelf, one sinkliner
WIDTH 600 DEEP WIDTH 600 DEEP WIDTH 600 DEEP
500 SU56SLF 600 SU66SLF
800 SU86SLF 900 SU96SLF 1000 SU106SLF 1200 SU126SLF
500 SU56SLD600 SU66SLD
Double Sink Base UnitDrawer Line: two doors, one working drawer, one dummy drawer, one shelf, one sinkliner
Double Sink Base UnitDrawer Line: two doors, two dummy drawers, one shelf, one sinkliner
WIDTH 600 DEEP WIDTH 600 DEEP
900 SU96SLDAC1000 SU106SLDAC1200 SU126SLDAC
900 SU96SLDAI1000 SU106SLDAI1200 SU126SLDAI
Drawer Base UnitFour drawers
Pan Drawer Base UnitOne drawer, two pull-outpan drawers
Built-under Oven HousingSupplied with a co-ordinatingfascia panel 120mm high.When fitting a built-under oven refer to the appliance manufacturer’s instructions regarding installation.
WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP
400 N/A DU46D500 DU55D DU56D600 DU65D DU66D
600 N/A PD66D3 600 N/A BOH66
Built-under Oven Housingwith Plinth DrawerSupplied ready for assembly with drawer.When fitting a built-under oven refer to the appliance manufacturer’s instructions regarding installation.
Double Base UnitFull height door,two doors, one shelf
Double Base UnitDrawer Line: two doors,two drawers, one shelf
WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP
600 N/A BOH66D 800 BU85F BU86F900 N/A BU96F1000 BU105F BU106F1200 BU125F BU126F
800 BU85D BU86D900 N/A BU96D1000 BU105D BU106D1200 BU125D BU126D
•Single base units can be hinged left or right. Please specify when ordering. For an explanation of handing, see page 4.†Lockable units are available for a limited door offer only - locks can be ordered separately. See page 29. Not all handles are compatible with lockable units - please refer to your Symphony Representative for further details.
•Single base units can be hinged left or right. Please specify when ordering. For an explanation of handing, see page 4.
VISTA AND EXCEL BASE UNITS VISTA AND EXCEL SINK AND HOB UNITS WITH SINKLINER
870
870
870
870
870
870
870
870870
870870
Single Base Unit•Full height door,one shelf
Double Sink Base UnitTwo full height doors,one shelf
Single Sink Base Unit•One door, dummy drawerone shelf
WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP
500 BU55F BU56F600 BU65F BU66F
1000 BU105F BU106F1200 BU125F BU126F
500 BU55DDD BU56DDD600 BU65DDD BU66DDD
Double Sink Base Unit*Drawer Line: two doors, one working drawer, one dummy drawer, one shelf
Double Sink Base UnitDrawer Line: two doors, two dummy drawers, one shelf
Pan Drawer Hob UnitOne dummy drawer, two pan drawers
WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP
1000 SU105D SU106D1200 SU125D SU126D
800 BU85DAI BU86DAI1000 SU105DAI SU106DAI1200 SU125DAI SU126DAI
600 N/A PD66D3DD
VISTA AND EXCEL SINK AND HOB UNITS WITHOUT SINKLINER
870
870870
870
870
Sink units are designed to support a sinktop or a worktop with an inset sink. The full length of a sit-on sinktop must be supported by units. Drainers of inset sinktops may be positioned over voids provided that the worktop is adequately supported. Please specify the drainer position of units marked*.•Single base units can be hinged left or right. Please specify when ordering.
All dimensions in millimetres.
Style A Style B Style C
WIDTH DEPTH FULL HEIGHT DRAWER DOOR LINE
WIDTH DEPTH FULL HEIGHT DRAWER DOOR LINE
WIDTH DEPTH FULL HEIGHT DRAWER DOOR LINE
800 500 CB85FA CB85DA800 600 CB86FA CB86DA
800 500 CB85FB CB85DB800 600 CB86FB CB86DB
800 500 CB85FC CB85DC800 600 CB86FC CB86DC
Style A Style A Style B
WIDTH DEPTH FULL HEIGHT DRAWER DOOR LINE
WIDTH DEPTH FULL HEIGHT DRAWER DOOR LINE
WIDTH DEPTH FULL HEIGHT DRAWER DOOR LINE
900 600 CB96FA CB96DA 1000 500 CB105FA CB105DA1000 600 CB106FA CB106DA
1000 500 CB105FB CB105DB1000 600 CB106FB CB106DB
1200mm CBU L-Shape CBU(Shelf Unit)
Supplied in 1 x assembledand 1 x ready for assembly parts
L-Shape CBU(Carousel Unit)
Supplied in 1 x assembledand 1 x ready for assembly parts
WIDTH DEPTH FULL HEIGHT DRAWER DOOR LINE
SIZE FULL HEIGHT DRAWER DOOR LINE
SIZE FULL HEIGHT DRAWER DOOR LINE
1200 500 CB125F CB125D1200 600 CB126F CB126D
930 X 930 LSB99F LSB99D 930 X 930 LCB99F LCB99D
Kubix’s range of corner base units allows wide fl exibility in the positioning of corner units for the clearance of water or soil vent pipes when required. Depending on the blanking panel/door combinations specifi ed, corner base units can be positioned 30mm, 130mm, 180mm, 230mm or 330mm from the return wall in order to join with either a 500mm or 600mm deep base unit. Please specify the handing of the blanking panel side when ordering. For an explanation of handing see page 4. NB: if utilising 500mm wide units the overall space required for the corner base unit will be reduced by 100mm. All dimensions in millimetres.
VISTA AND EXCEL CORNER BASE UNITS
400Door
1030
340Blank
230mm Gap
300Door
930
540Blank
130mm Gap
240Blank
500Door
1130
330mm Gap
500Door
1130
540Blank
130mm Gap
1030
400Door
540Blank
30mm Gap
450Door
930
180mm Gap
390Blank
600Door
1230
30mm Gap
600Blank
870
870
870
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 18-19 10/05/2012 11:10
20 21
Single Wall Unit*One door, one shelf
Single Wall Unit•*One door, one shelf (Vista)One door, two shelves (Excel)
Single Wall Unit*One door, two shelves
WIDTH DEPTH° CODE WIDTH DEPTH° CODE WIDTH DEPTH° CODE
300 300 WU356400 300 WU456450 300 WU4556500 300 WU556600 300 WU656
300 300 WU372400 300 WU472450 300 WU4572500 300 WU572600 300 WU672
300 300 WU390400 300 WU490450 300 WU4590500 300 WU590600 300 WU690
Single Wall Unit – Lockable†*One door, one shelf
Single Wall Unit•* – Lockable†One door, one shelf (Vista)One door, two shelves (Excel)
Single Wall Unit – Lockable†*One door, two shelves
WIDTH DEPTH° CODE WIDTH DEPTH° CODE WIDTH DEPTH° CODE
300 300 WU356LK400 300 WU456LK 450 300 WU4556LK500 300 WU556LK600 300 WU656LK
300 300 WU372LK400 300 WU472LK 450 300 WU4576LK500 300 WU572LK600 300 WU672LK
300 300 WU390LK400 300 WU490LK450 300 WU4590LK500 300 WU590LK600 300 WU690LK
Double Wall Unit Two doors, one shelf
Double Wall Unit•Two door, one shelf (Vista)Two door, two shelves (Excel)
Double Wall UnitTwo doors, two shelves
WIDTH DEPTH° CODE WIDTH DEPTH° CODE WIDTH DEPTH° CODE
800 300 WU856900 300 WU9561000 300 WU1056
800 300 WU872900 300 WU9721000 300 WU1072
800 300 WU890900 300 WU9901000 300 WU1090
VISTA AND EXCEL WALL UNITS
* Single wall units can be hinged left or right. Please specify when ordering.† Lockable units available for a limited door offer only - locks can be ordered separately. See page 29. Not all handles are compatible with lockable units - please refer to your Symphony Representative for further details. • On 18mm Excel cabinet, two shelves.° Nominal depth including frontal.
561
561
561 724 900
724
724
900
900
561
561
900
724 900
All dimensions in millimetres.
Corner Wall UnitBlank end for corner return, one door, one shelf
Corner Wall Unit• Blank end for corner return, one door, one shelf
Corner Wall UnitBlank end for corner return, one door, two shelves
WIDTH DEPTH CODE WIDTH DEPTH CODE WIDTH DEPTH CODE
600 300 CWU656 600 300 CWU672 600 300 CWU690
Diagonal Corner Wall Unit*One door, one shelf
Diagonal Corner Wall Unit•* One door, one shelf
Diagonal Corner Wall Unit*One door, two shelves
WIDTH DEPTH CODE WIDTH DEPTH CODE WIDTH DEPTH CODE
630 630 DWU656(INC. 2 SPACER
PANELS)
630 630 DWU672(INC. 2 SPACER
PANELS)
630 630 DWU690(INC. 2 SPACER
PANELS
Open Diagonal Corner Wall Unit*One shelf
Open Diagonal Corner Wall Unit•* One shelf
Open Diagonal Corner Wall Unit•*Shelves
WIDTH DEPTH CODE WIDTH DEPTH CODE WIDTH DEPTH CODE
630 630 OWU656(INC. 2 SPACER
PANELS)
630 630 OWU672(INC. 2 SPACER
PANELS)
630 630 OWU690(INC. 2 SPACER
PANELS)
VISTA AND EXCEL CORNER WALL UNITS
Corner Wall Units should be placed 30mm from their return wall so that the total space occupied when measured from the return wall is 630mm.Handing for Corner Wall Units is the blank side. Diagonal Corner Wall Units are manufactured to 630mm in both directions, so no additional spacing is required.* Diagonal Corner Wall Units must be fi tted within a run of units. They are not suitable for use as a terminating unit or stand alone.• On 18mm Excel cabinet, two shelves.
724 900
561724
All dimensions in millimetres.
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 20-21 10/05/2012 11:10
20 21
Single Wall Unit*One door, one shelf
Single Wall Unit•*One door, one shelf (Vista)One door, two shelves (Excel)
Single Wall Unit*One door, two shelves
WIDTH DEPTH° CODE WIDTH DEPTH° CODE WIDTH DEPTH° CODE
300 300 WU356400 300 WU456450 300 WU4556500 300 WU556600 300 WU656
300 300 WU372400 300 WU472450 300 WU4572500 300 WU572600 300 WU672
300 300 WU390400 300 WU490450 300 WU4590500 300 WU590600 300 WU690
Single Wall Unit – Lockable†*One door, one shelf
Single Wall Unit•* – Lockable†One door, one shelf (Vista)One door, two shelves (Excel)
Single Wall Unit – Lockable†*One door, two shelves
WIDTH DEPTH° CODE WIDTH DEPTH° CODE WIDTH DEPTH° CODE
300 300 WU356LK400 300 WU456LK 450 300 WU4556LK500 300 WU556LK600 300 WU656LK
300 300 WU372LK400 300 WU472LK 450 300 WU4576LK500 300 WU572LK600 300 WU672LK
300 300 WU390LK400 300 WU490LK450 300 WU4590LK500 300 WU590LK600 300 WU690LK
Double Wall Unit Two doors, one shelf
Double Wall Unit•Two door, one shelf (Vista)Two door, two shelves (Excel)
Double Wall UnitTwo doors, two shelves
WIDTH DEPTH° CODE WIDTH DEPTH° CODE WIDTH DEPTH° CODE
800 300 WU856900 300 WU9561000 300 WU1056
800 300 WU872900 300 WU9721000 300 WU1072
800 300 WU890900 300 WU9901000 300 WU1090
VISTA AND EXCEL WALL UNITS
* Single wall units can be hinged left or right. Please specify when ordering.† Lockable units available for a limited door offer only - locks can be ordered separately. See page 29. Not all handles are compatible with lockable units - please refer to your Symphony Representative for further details. • On 18mm Excel cabinet, two shelves.° Nominal depth including frontal.
561
561
561 724 900
724
724
900
900
561
561
900
724 900
All dimensions in millimetres.
Corner Wall UnitBlank end for corner return, one door, one shelf
Corner Wall Unit• Blank end for corner return, one door, one shelf
Corner Wall UnitBlank end for corner return, one door, two shelves
WIDTH DEPTH CODE WIDTH DEPTH CODE WIDTH DEPTH CODE
600 300 CWU656 600 300 CWU672 600 300 CWU690
Diagonal Corner Wall Unit*One door, one shelf
Diagonal Corner Wall Unit•* One door, one shelf
Diagonal Corner Wall Unit*One door, two shelves
WIDTH DEPTH CODE WIDTH DEPTH CODE WIDTH DEPTH CODE
630 630 DWU656(INC. 2 SPACER
PANELS)
630 630 DWU672(INC. 2 SPACER
PANELS)
630 630 DWU690(INC. 2 SPACER
PANELS
Open Diagonal Corner Wall Unit*One shelf
Open Diagonal Corner Wall Unit•* One shelf
Open Diagonal Corner Wall Unit•*Shelves
WIDTH DEPTH CODE WIDTH DEPTH CODE WIDTH DEPTH CODE
630 630 OWU656(INC. 2 SPACER
PANELS)
630 630 OWU672(INC. 2 SPACER
PANELS)
630 630 OWU690(INC. 2 SPACER
PANELS)
VISTA AND EXCEL CORNER WALL UNITS
Corner Wall Units should be placed 30mm from their return wall so that the total space occupied when measured from the return wall is 630mm.Handing for Corner Wall Units is the blank side. Diagonal Corner Wall Units are manufactured to 630mm in both directions, so no additional spacing is required.* Diagonal Corner Wall Units must be fi tted within a run of units. They are not suitable for use as a terminating unit or stand alone.• On 18mm Excel cabinet, two shelves.
724 900
561724
All dimensions in millimetres.
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 20-21 10/05/2012 11:10
22 23
All dimensions in millimetres. All dimensions in millimetres.
VISTA AND EXCEL LARDER UNITS
Units can be hinged left or right. Please specify when ordering. For an explanation of handing see page 4.Pull-out larder unit cabinets are supplied assembled but wirework must be fi tted on site. • Supplied as 18mm Excel only.
Larder Unit Two doors, four shelves
Larder Unit Two doors, four shelves
Top door height: 1228Bottom door height: 896
WIDTH 300 DEEP 500 DEEP 600 DEEP WIDTH 300 DEEP 500 DEEP 600 DEEP
300 LU33• LU35 LU36500 – LU55 LU56600 – LU65 LU66
300 LU3323• – LU3623500 – LU5523 LU5623600 – LU6523 LU6623
Pull-out Larder Unit Pull-out frame/door
Pull-out Larder Unit Pull-out frame/door
WIDTH 600 DEEP 600 DEEP SOFT CLOSE WIDTH 600 DEEP 600 DEEP SOFT CLOSE
300 PL36 WPL36 300 DL3623 WPL3623
2100
22762100
Please note: Follow the appliance manufacturer’s recommendations for the distance between the worktop and the cooker hood.
Over Cooker Hood Unit One lift-up door
Door Front for Integrated Cooker Hood
WIDTH DEPTH CODE WIDTH CODE
600 300 OCH63 600 DRICASS
VISTA AND EXCEL OVER COOKER HOOD UNITS
300 450
2276
930 724
Please ask your local Symphony representative for details of the most suitable housing or contact the Building Division Sales Offi ce on 01226 446000.
Wall Boiler Housing Assembled (15mm Vista only)
Wall Boiler Housing Ready for assembly
Dresser Boiler HousingAssembled
WIDTH DEPTH CODE WIDTH DEPTH CODE HEIGHT WIDTH DEPTH CODE
600 400 BH69 600 400 KBHC672 (CABINET) DRW26ASS (DOOR)
1190 600 400 BH61366 600 400 BH6131560 600 400 BH615
VISTA AND EXCEL BOILER HOUSINGS
1228 door
1228 door
1228 door
1228 door
720 door
720 door
896 door
896 door
VISTA AND EXCEL BROOM UNITS
Units can be hinged left or right. Please specify when ordering.
Broom Unit Two doors, three shelves
Recommended WU Height: 724mm
Broom Unit Two doors, four shelves
Recommended WU Height: 900mm
WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP
300 BR35 BR36500 BR55 BR56600 BR65 BR66
300 – BR3623 500 BR5523 BR5623 600 BR6523 BR6623
22762100
1128 door 1228 door
720 door 896 door
Oven Housing*Suffix depending on theappliance type and doorconfiguration
Integrated Housing*Suffix depending on the appliance type and door configuration
HEIGHT WIDTH DEPTH CODE HEIGHT WIDTH DEPTH CODE
2100 600 600 OH66*2276 600 600 OH6623*
2100 600 600 IF66*2276 600 600 IF6623*
VISTA AND EXCEL APPLIANCE HOUSING VISTA AND EXCEL INTEGRATED HOUSING
Symphony can supply integrated housings to accommodate a wide selection of built-in appliances. For appliances not supplied by Symphony, please make sure sizes are checked before ordering. The appliance manufacturer and the model number must be specifi ed when ordering. Units can be hinged left or right. If not specifi ed, refrigeration housings will be supplied right hand hinged and oven housings left hand hinged.
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 22-23 10/05/2012 11:10
22 23
All dimensions in millimetres. All dimensions in millimetres.
VISTA AND EXCEL LARDER UNITS
Units can be hinged left or right. Please specify when ordering. For an explanation of handing see page 4.Pull-out larder unit cabinets are supplied assembled but wirework must be fi tted on site. • Supplied as 18mm Excel only.
Larder Unit Two doors, four shelves
Larder Unit Two doors, four shelves
Top door height: 1228Bottom door height: 896
WIDTH 300 DEEP 500 DEEP 600 DEEP WIDTH 300 DEEP 500 DEEP 600 DEEP
300 LU33• LU35 LU36500 – LU55 LU56600 – LU65 LU66
300 LU3323• – LU3623500 – LU5523 LU5623600 – LU6523 LU6623
Pull-out Larder Unit Pull-out frame/door
Pull-out Larder Unit Pull-out frame/door
WIDTH 600 DEEP 600 DEEP SOFT CLOSE WIDTH 600 DEEP 600 DEEP SOFT CLOSE
300 PL36 WPL36 300 DL3623 WPL3623
2100
22762100
Please note: Follow the appliance manufacturer’s recommendations for the distance between the worktop and the cooker hood.
Over Cooker Hood Unit One lift-up door
Door Front for Integrated Cooker Hood
WIDTH DEPTH CODE WIDTH CODE
600 300 OCH63 600 DRICASS
VISTA AND EXCEL OVER COOKER HOOD UNITS
300 450
2276
930 724
Please ask your local Symphony representative for details of the most suitable housing or contact the Building Division Sales Offi ce on 01226 446000.
Wall Boiler Housing Assembled (15mm Vista only)
Wall Boiler Housing Ready for assembly
Dresser Boiler HousingAssembled
WIDTH DEPTH CODE WIDTH DEPTH CODE HEIGHT WIDTH DEPTH CODE
600 400 BH69 600 400 KBHC672 (CABINET) DRW26ASS (DOOR)
1190 600 400 BH61366 600 400 BH6131560 600 400 BH615
VISTA AND EXCEL BOILER HOUSINGS
1228 door
1228 door
1228 door
1228 door
720 door
720 door
896 door
896 door
VISTA AND EXCEL BROOM UNITS
Units can be hinged left or right. Please specify when ordering.
Broom Unit Two doors, three shelves
Recommended WU Height: 724mm
Broom Unit Two doors, four shelves
Recommended WU Height: 900mm
WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP
300 BR35 BR36500 BR55 BR56600 BR65 BR66
300 – BR3623 500 BR5523 BR5623 600 BR6523 BR6623
22762100
1128 door 1228 door
720 door 896 door
Oven Housing*Suffix depending on theappliance type and doorconfiguration
Integrated Housing*Suffix depending on the appliance type and door configuration
HEIGHT WIDTH DEPTH CODE HEIGHT WIDTH DEPTH CODE
2100 600 600 OH66*2276 600 600 OH6623*
2100 600 600 IF66*2276 600 600 IF6623*
VISTA AND EXCEL APPLIANCE HOUSING VISTA AND EXCEL INTEGRATED HOUSING
Symphony can supply integrated housings to accommodate a wide selection of built-in appliances. For appliances not supplied by Symphony, please make sure sizes are checked before ordering. The appliance manufacturer and the model number must be specifi ed when ordering. Units can be hinged left or right. If not specifi ed, refrigeration housings will be supplied right hand hinged and oven housings left hand hinged.
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 22-23 10/05/2012 11:10
24 25
* Corner Wall Units should be placed 30mm from their return wall so that the total space occupied when measured from the return wall is 630mm. Corner Wall Units must be fi tted within a run of units. They are not suitable for use as a terminating unit or stand alone.** Diagonal Corner Wall Units must be fi tted within a run of units. They are not suitable for use as a terminating unit or stand alone.Δ Not available in 18mm Excel Ready For Assembly offer. † Only available in 18mm Excel Ready For Assembly offer.• On 18mm Excel cabinet, two shelves.
Single Wall Unit One door, one shelf
Single Wall Unit• One door, one shelf (Vista)One door, two shelves (Excel)
Single Wall Unit One door, two shelves
WIDTH DEPTH CODE WIDTH DEPTH CODE WIDTH DEPTH CODE
300 300 WU356400 300 WU456500 300 WU556600 300 WU656
300 300 WU372400 300 WU472500 300 WU572600 300 WU672
300 300 WU390†400 300 WU490†500 300 WU590†600 300 WU690†
Double Wall Unit Two doors, one shelf
Double Wall Unit• Two door, one shelf (Vista)Two door, two shelves (Excel)
Double Wall UnitTwo doors, two shelves
WIDTH DEPTH CODE WIDTH DEPTH CODE WIDTH DEPTH CODE
800 300 WU856900 300 WU9561000 300 WU1056
800 300 WU872†900 300 WU972†1000 300 WU1072†
800 300 WU890†900 300 WU990†1000 300 WU1090†
Corner Wall Unit*One door, one shelfone blanking panel900 = two shelves
Diagonal Corner Wall Unit** One door, one shelf (Vista)One door, two shelves (Excel)
Over Cooker Hood UnitOne lift up door
HEIGHT WIDTH DEPTH CODE WIDTH DEPTH CODE HEIGHT WIDTH DEPTH CODE
561 600 300 CWU656724 600 300 CWU672900 600 300 CWU690†
630 630 DWU656 300 600 300 OCH63
VISTA AND EXCEL READY FOR ASSEMBLY
2100
1228 Door
720 Door
1228 Door
720 Door
2100
900561 724
900561 724
561300
Broom Unit Two doors, three shelves
Larder Unit Two doors, four shelves
Top door height 1228 Top door height 1228
Bottom door height 720 Bottom door height 720
WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP
500 BR55Δ BR56Δ 500 LU55Δ LU56
WALL UNITS
TALL UNITS
All dimensions in millimetres.
Single Base UnitFull height door:one door, one shelf
Single Base UnitDrawer Line:One door, one drawer, one shelf
Drawer Base UnitFour drawers
WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP
300 BU35F BU36F400 BU45F BU46F450 N/A BU456F500 BU55F BU56F600 BU65F BU66F
300 BU35D BU36D400 BU45D BU46D450 N/A BU456D500 BU55D BU56D600 BU65D BU66D
400 N/A DU46D† 500 DU55D DU56D600 N/A DU66D†
Double Base Unit Full height door:two doors, one shelf
Double Base UnitDrawer Line:Two doors, two drawers,one shelf
Double Sink Base UnitDrawer Line:Two doors, one working drawer,one dummy drawer, one shelf
WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP
800 BU85F BU86F900 N/A BU96F1000 BU105F BU106F
800 BU85D BU86D900 N/A BU96D1000 BU105D BU106D1200 BU125D BU126D
1000 SU105D SU106D1200 SU125D SU126D
VISTA AND EXCEL READY FOR ASSEMBLY
870 870
All dimensions in millimetres.
† Only available in 18mm Excel Ready For Assembly offer.
Corner Base UnitOne door, one shelf Style A(1000mm wide shown)
Corner Base Unit L-Shape Corner Base Unit(Carousel Unit)
WIDTH DEPTH FULL HEIGHT DRAWER DOOR LINE
WIDTH SIZE FULL HEIGHT DRAWER DOOR LINE
WIDTH SIZE FULL HEIGHT DRAWER DOOR LINE
800 600 CB86FA CB86DA†900 600 CB96FA CB96DA†1000 500 CB105FA CB105D1000 600 CB106FA CB106DA
870 930 X 930 LSB99F LSB99D† 870 930 X 930 LCB99F LCB99D†
500Door
1130
540Blank
130mm Gap
BASE UNITS
CORNER BASE UNITS
870
870 870870
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 24-25 10/05/2012 11:10
24 25
* Corner Wall Units should be placed 30mm from their return wall so that the total space occupied when measured from the return wall is 630mm. Corner Wall Units must be fi tted within a run of units. They are not suitable for use as a terminating unit or stand alone.** Diagonal Corner Wall Units must be fi tted within a run of units. They are not suitable for use as a terminating unit or stand alone.Δ Not available in 18mm Excel Ready For Assembly offer. † Only available in 18mm Excel Ready For Assembly offer.• On 18mm Excel cabinet, two shelves.
Single Wall Unit One door, one shelf
Single Wall Unit• One door, one shelf (Vista)One door, two shelves (Excel)
Single Wall Unit One door, two shelves
WIDTH DEPTH CODE WIDTH DEPTH CODE WIDTH DEPTH CODE
300 300 WU356400 300 WU456500 300 WU556600 300 WU656
300 300 WU372400 300 WU472500 300 WU572600 300 WU672
300 300 WU390†400 300 WU490†500 300 WU590†600 300 WU690†
Double Wall Unit Two doors, one shelf
Double Wall Unit• Two door, one shelf (Vista)Two door, two shelves (Excel)
Double Wall UnitTwo doors, two shelves
WIDTH DEPTH CODE WIDTH DEPTH CODE WIDTH DEPTH CODE
800 300 WU856900 300 WU9561000 300 WU1056
800 300 WU872†900 300 WU972†1000 300 WU1072†
800 300 WU890†900 300 WU990†1000 300 WU1090†
Corner Wall Unit*One door, one shelfone blanking panel900 = two shelves
Diagonal Corner Wall Unit** One door, one shelf (Vista)One door, two shelves (Excel)
Over Cooker Hood UnitOne lift up door
HEIGHT WIDTH DEPTH CODE WIDTH DEPTH CODE HEIGHT WIDTH DEPTH CODE
561 600 300 CWU656724 600 300 CWU672900 600 300 CWU690†
630 630 DWU656 300 600 300 OCH63
VISTA AND EXCEL READY FOR ASSEMBLY
2100
1228 Door
720 Door
1228 Door
720 Door
2100
900561 724
900561 724
561300
Broom Unit Two doors, three shelves
Larder Unit Two doors, four shelves
Top door height 1228 Top door height 1228
Bottom door height 720 Bottom door height 720
WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP
500 BR55Δ BR56Δ 500 LU55Δ LU56
WALL UNITS
TALL UNITS
All dimensions in millimetres.
Single Base UnitFull height door:one door, one shelf
Single Base UnitDrawer Line:One door, one drawer, one shelf
Drawer Base UnitFour drawers
WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP
300 BU35F BU36F400 BU45F BU46F450 N/A BU456F500 BU55F BU56F600 BU65F BU66F
300 BU35D BU36D400 BU45D BU46D450 N/A BU456D500 BU55D BU56D600 BU65D BU66D
400 N/A DU46D† 500 DU55D DU56D600 N/A DU66D†
Double Base Unit Full height door:two doors, one shelf
Double Base UnitDrawer Line:Two doors, two drawers,one shelf
Double Sink Base UnitDrawer Line:Two doors, one working drawer,one dummy drawer, one shelf
WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP WIDTH 500 DEEP 600 DEEP
800 BU85F BU86F900 N/A BU96F1000 BU105F BU106F
800 BU85D BU86D900 N/A BU96D1000 BU105D BU106D1200 BU125D BU126D
1000 SU105D SU106D1200 SU125D SU126D
VISTA AND EXCEL READY FOR ASSEMBLY
870 870
All dimensions in millimetres.
† Only available in 18mm Excel Ready For Assembly offer.
Corner Base UnitOne door, one shelf Style A(1000mm wide shown)
Corner Base Unit L-Shape Corner Base Unit(Carousel Unit)
WIDTH DEPTH FULL HEIGHT DRAWER DOOR LINE
WIDTH SIZE FULL HEIGHT DRAWER DOOR LINE
WIDTH SIZE FULL HEIGHT DRAWER DOOR LINE
800 600 CB86FA CB86DA†900 600 CB96FA CB96DA†1000 500 CB105FA CB105D1000 600 CB106FA CB106DA
870 930 X 930 LSB99F LSB99D† 870 930 X 930 LCB99F LCB99D†
500Door
1130
540Blank
130mm Gap
BASE UNITS
CORNER BASE UNITS
870
870 870870
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 24-25 10/05/2012 11:10
26 27
Larder Unit4 Shelves
Broom Unit3 Shelves2 Cut Back
Oven Housing Unit*Depending on the appliance type and door configuration
CAPACITY M³ WIDTH DEPTH CODE CAPACITY M³ WIDTH DEPTH CODE CAPACITY M³ WIDTH DEPTH CODE
0.25 300 600 LU36
0.44 500 600 LU56
0.52 600 600 LU66
0.25 300 600 BR36
0.44 500 600 BR56
0.52 600 600 BR66
0.54 600 600 OH665*
Oven Housing UnitOne wirework basketand one metal sided basket
Fridge Housing Unit*Depending on the appliance type and door configuration
Larder Unit
CAPACITY M³ WIDTH DEPTH CODE CAPACITY M³ WIDTH DEPTH CODE CAPACITY M³ WIDTH DEPTH CODE
0.54 600 600 OH662G 0.54 600 600 IF66A*
0.54 600 600 IF66B*
0.54 600 600 IF66C*
0.54 600 600 IF66D*
0.32 500 600 LU5613
Single oven housing Single Oven & Microwave Housing
Double Oven Housing
72 Fascia296 Pull-out Drawer
CAPACITY M³ WIDTH DEPTH CODE CAPACITY M³ WIDTH DEPTH CODE CAPACITY M³ WIDTH DEPTH CODE
0.33 600 600 SOH6613 0.33 600 600 SOH6613A 0.33 600 600 DOH6613
Appliance Housing Microwave Housing
CAPACITY M³ WIDTH DEPTH CODE CAPACITY M³ WIDTH DEPTH CODE
0.33 600 600 IF6613 0.33 600 600 MOH6613D3
ESPRIT RANGE CONTENT
2100
2100
2100
2100
2100
1381
1381
1381
1381
1381
1381
1228 Door
450 Door
1228 Door72 Fascia
1228 Door
720 Door
450 Pull-out Drawer
720 Door
72 Fascia
930 Door
47 Fascia
159 Drawer
276 Drawer
276 Drawer
72 Fascia 72 Fascia
72 Fascia
296 Pull-out Drawer120 Fascia557 Door
296 Pull-out Drawer
All dimensions in millimetres. All dimensions in millimetres.
Base UnitOne door, one shelf
Drawer UnitThree drawers
Pan Drawer Unit2 drawers
C/CAPACITY M³ WIDTH DEPTH CODE CAPACITY M³ WIDTH DEPTH CODE CAPACITY M³ WIDTH DEPTH CODE
0.07 300 600 DBU356
0.10 400 600 DBU456
0.11 450 600 DBU4556
0.12 500 600 DBU556
0.15 600 600 DBU656
0.07 400 600 DDU456
0.12 500 600 DDU556
0.15 600 600 DDU656
0.10 600 600 PDU656
Full Height CornerBase Unit No corner post. Includes half carousel baskets
Full Height CornerBase UnitWith corner post.Includes half carousel baskets
Trolley Unitavailable in white only
CAPACITY M³ WIDTH DEPTH CODE CAPACITY M³ WIDTH DEPTH CODE WIDTH DEPTH CODE
0.25 1000 600 DCB1056A 0.25 1000 600 DCB1056B 500 500 DTU55
Wall Unit
Open Diagonal Corner Wall Unit Frontal Integrated Hood
CAPACITY M³ WIDTH DEPTH CODE CAPACITY M³ WIDTH DEPTH CODE WIDTH CODE
0.05 300 325 DDWU372
0.07 400 325 DDWU472
0.08 450 325 DDWU4572
0.08 500 325 DDWU572
0.10 600 325 DDWU672
0.19 630 630 DOWU672 600 DRICASS
Tambour Larder Unit 1235mmroll down door
WIDTH CODE
500 TLU5613SL
ESPRIT RANGE CONTENT
561 561
500561
724
561
561
724 450
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 26-27 14/05/2012 12:15
26 27
Larder Unit4 Shelves
Broom Unit3 Shelves2 Cut Back
Oven Housing Unit*Depending on the appliance type and door configuration
CAPACITY M³ WIDTH DEPTH CODE CAPACITY M³ WIDTH DEPTH CODE CAPACITY M³ WIDTH DEPTH CODE
0.25 300 600 LU360.44 500 600 LU560.52 600 600 LU66
0.25 300 600 BR360.44 500 600 BR560.52 600 600 BR66
0.54 600 600 OH665*
Oven Housing UnitOne wirework basketand one metal sided basket
Fridge Housing Unit*Depending on the appliance type and door configuration
Larder Unit
CAPACITY M³ WIDTH DEPTH CODE CAPACITY M³ WIDTH DEPTH CODE CAPACITY M³ WIDTH DEPTH CODE
0.54 600 600 OH662G 0.54 600 600 IF66A*0.54 600 600 IF66B*0.54 600 600 IF66C*0.54 600 600 IF66D*
0.32 500 600 LU5613
Single oven housing Single Oven & Microwave Housing
Double Oven Housing
72 Fascia296 Pull-out Drawer
CAPACITY M³ WIDTH DEPTH CODE CAPACITY M³ WIDTH DEPTH CODE CAPACITY M³ WIDTH DEPTH CODE
0.33 600 600 SOH6613 0.33 600 600 SOH6613A 0.33 600 600 DOH6613
Appliance Housing Microwave Housing
CAPACITY M³ WIDTH DEPTH CODE CAPACITY M³ WIDTH DEPTH CODE
0.33 600 600 IF6613 0.33 600 600 MOH6613D3
ESPRIT RANGE CONTENT
2100
2100
2100
2100
2100
1381
1381
1381
1381
1381
1381
1228 Door
450 Door
1228 Door72 Fascia
1228 Door
720 Door
450 Pull-out Drawer
720 Door
72 Fascia
930 Door
47 Fascia
159 Drawer
276 Drawer
276 Drawer
72 Fascia 72 Fascia
72 Fascia
296 Pull-out Drawer120 Fascia557 Door
296 Pull-out Drawer
All dimensions in millimetres. All dimensions in millimetres.
Base UnitOne door, one shelf
Drawer UnitThree drawers
Pan Drawer Unit2 drawers
C/CAPACITY M³ WIDTH DEPTH CODE CAPACITY M³ WIDTH DEPTH CODE CAPACITY M³ WIDTH DEPTH CODE
0.07 300 600 DBU3560.10 400 600 DBU4560.11 450 600 DBU45560.12 500 600 DBU5560.15 600 600 DBU656
0.07 400 600 DDU4560.12 500 600 DDU5560.15 600 600 DDU656
0.10 600 600 PDU656
Full Height CornerBase Unit No corner post. Includes half carousel baskets
Full Height CornerBase UnitWith corner post.Includes half carousel baskets
Trolley Unitavailable in white only
CAPACITY M³ WIDTH DEPTH CODE CAPACITY M³ WIDTH DEPTH CODE WIDTH DEPTH CODE
0.25 1000 600 DCB1056A 0.25 1000 600 DCB1056B 500 500 DTU55
Wall Unit
Open Diagonal Corner Wall Unit Frontal Integrated Hood
CAPACITY M³ WIDTH DEPTH CODE CAPACITY M³ WIDTH DEPTH CODE WIDTH CODE
0.05 300 325 DDWU3720.07 400 325 DDWU4720.08 450 325 DDWU45720.08 500 325 DDWU5720.10 600 325 DDWU672
0.19 630 630 DOWU672 600 DRICASS
Tambour Larder Unit 1235mmroll down door
WIDTH CODE
500 TLU5613SL
ESPRIT RANGE CONTENT
561 561
500561
724
561
561
724 450
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 26-27 10/05/2012 11:10
28 29
Pull Down Basket To fit 500mm wide units only110° Hinges only
Single Tier Bottle RackTo fit 500mm or 600mm wide units
Two Tier Bottle Rack To fit 500mm or 600mm wide units
CODE CODE CODE
SPRINGBASKCX DOORBASKCH DOORBASKTCH
1/2 Carousel Baskets Pair. Can be fitted to 1000mm (500 door) or 1200mm (600 door) corner base
3/4 CarouselCan be fitted to ‘L’ shape corner base
Cutlery TrayTo fit 500mm drawersSupplied in Euro beige colour (433mm x 420mm)*Does not fit Esprit drawers
CODE CODE CODE
CAROBASKCH CAROBASKCX CTRAYSUPR5V
Space Saving Triple Waste Bin
(400mm Unit only)1 x 20 litres 2 x 10 litresDo not use with 170˚ hinge
Eco-bin
Recycling Waste Bin(500/600 Unit only)1 x 19 litres, 1 x 12 litres, 1 x 9 litreDo not use with 170˚ hinge
60 Litre Eco Bin (600mm unit only)1 x 30 litres2 x 15 litres
Lock Lock for lockable units and Strike Plate
What Lock Magnetic Lock System2 x locks per pack
CODE CODE CODE DESCRIPTION CODE CODE
ECOBIN4 RECYCLEBIN ECOBIN60L LOCK for lockable units LOCKSTRIKE PLATE LOCKSTRKPLT
MAGLOCK
ACCESSORIES
100 410
100
390
390
850mm diameter 700mm diameter
Double Towel Rail(Annodised plastic)
Swing BinDeluxe chrome bin 12 litres(to fit 400mm unit minimum)
Worktop Support LegsSupplied at 870mm high for worktopsInstallers can reduce on site to table height
CODE CODE CODE
TRAIL SWINGBINCH CHRLEG (CHROME) (25 DIA.)LEGBAR (WHITE) (60 DIA.)
Rehang Hingeplate
Hinge Repair Kit
Universal Sink Liner
(15mm and 18mm cabinets)
Triple Waste Bin (300mm Unit only)3 x 10 litresDo not use with 170˚ hinge
CODE WIDTH CODE CODE
HINGEREP2 (PACK OF 2)HINGEREP12 (PACK OF 12)
500 SU5LINER600 SU6LINER800 SU8LINER900 SU9LINER1000 SU10LINER1200 SU12LINER
ECOBIN3X10
Internal accessories require assembly on site. All are supplied with necessary fi tting pack.
100
MFC Block End Support Panel For use when extending worktops over appliances, etc.
MFC Tray Platform 720 MFC Base/Wall Spacer Panel 15mm
HEIGHT WIDTH DEPTH CODE WIDTH DEPTH CODE WIDTH CODE
870 570 15 ES687P920 650 18 EP6592P
300 570 TSP3X6P 300 BSP372P
Modern Tangent MDF Cornice
Modern Tangent MDF Pelmet
Universal Cornice And Pelmet MDF
LENGTH CODE LENGTH CODE LENGTH CODE
3000 CORT30P 3000 UPST30P 3000 CORPEL30
15mm cabinet
18mm cabinet
DESCRIPTION CODE DESCRIPTION CODE
BASE UNIT CPOSTBU560 WALL UNIT CPOSTSWU56720 WALL UNIT CPOSTTWU72900 WALL UNIT CPOSTTWU90
BASE UNIT LPOSTCBU18560 WALL UNIT LPOSTWU5618720 WALL UNIT LPOSTWU7218900 WALL UNIT LPOSTWU9018
MFC Continuous Plinth Supplied separate from units
Continuous Plinth
Available in white and pear
900 MFC Base/WallSpacer Panel 15mm
HEIGHT WIDTH CODE HEIGHT WIDTH CODE HEIGHT WIDTH CODE
142 2600 CONPLINTH200 2600 CONPLINTH262200 650 RET PLINTH652
142 2600 CONPLINTHMR (MOISTURE RESISTANT)
900 300 BSP390P
Plinth Connector Bracket(Use with continuous plinth)
High Plinth Bracket
CODE WIDTH CODE
BRKPLINTH 200 BRKPLINTH200
BACK, END, FILLER AND BLENDER PANELS
CORNICE AND PELMET
CORNER POSTS
MR
All dimensions in millimetres. All dimensions in millimetres.
45
mm
35
mm
55
mm
720
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 28-29 10/05/2012 11:10
28 29
Pull Down Basket To fit 500mm wide units only110° Hinges only
Single Tier Bottle RackTo fit 500mm or 600mm wide units
Two Tier Bottle Rack To fit 500mm or 600mm wide units
CODE CODE CODE
SPRINGBASKCX DOORBASKCH DOORBASKTCH
1/2 Carousel Baskets Pair. Can be fitted to 1000mm (500 door) or 1200mm (600 door) corner base
3/4 CarouselCan be fitted to ‘L’ shape corner base
Cutlery TrayTo fit 500mm drawersSupplied in Euro beige colour (433mm x 420mm)*Does not fit Esprit drawers
CODE CODE CODE
CAROBASKCH CAROBASKCX CTRAYSUPR5V
Space Saving Triple Waste Bin
(400mm Unit only)1 x 20 litres 2 x 10 litresDo not use with 170˚ hinge
Eco-bin
Recycling Waste Bin(500/600 Unit only)1 x 19 litres, 1 x 12 litres, 1 x 9 litreDo not use with 170˚ hinge
60 Litre Eco Bin (600mm unit only)1 x 30 litres2 x 15 litres
Lock Lock for lockable units and Strike Plate
What Lock Magnetic Lock System2 x locks per pack
CODE CODE CODE DESCRIPTION CODE CODE
ECOBIN4 RECYCLEBIN ECOBIN60L LOCK for lockable units LOCKSTRIKE PLATE LOCKSTRKPLT
MAGLOCK
ACCESSORIES
100 410
100
390
390
850mm diameter 700mm diameter
Double Towel Rail(Annodised plastic)
Swing BinDeluxe chrome bin 12 litres(to fit 400mm unit minimum)
Worktop Support LegsSupplied at 870mm high for worktopsInstallers can reduce on site to table height
CODE CODE CODE
TRAIL SWINGBINCH CHRLEG (CHROME) (25 DIA.)LEGBAR (WHITE) (60 DIA.)
Rehang Hingeplate
Hinge Repair Kit
Universal Sink Liner
(15mm and 18mm cabinets)
Triple Waste Bin (300mm Unit only)3 x 10 litresDo not use with 170˚ hinge
CODE WIDTH CODE CODE
HINGEREP2 (PACK OF 2)HINGEREP12 (PACK OF 12)
500 SU5LINER600 SU6LINER800 SU8LINER900 SU9LINER1000 SU10LINER1200 SU12LINER
ECOBIN3X10
Internal accessories require assembly on site. All are supplied with necessary fi tting pack.
100
MFC Block End Support Panel For use when extending worktops over appliances, etc.
MFC Tray Platform 720 MFC Base/Wall Spacer Panel 15mm
HEIGHT WIDTH DEPTH CODE WIDTH DEPTH CODE WIDTH CODE
870 570 15 ES687P920 650 18 EP6592P
300 570 TSP3X6P 300 BSP372P
Modern Tangent MDF Cornice
Modern Tangent MDF Pelmet
Universal Cornice And Pelmet MDF
LENGTH CODE LENGTH CODE LENGTH CODE
3000 CORT30P 3000 UPST30P 3000 CORPEL30
15mm cabinet
18mm cabinet
DESCRIPTION CODE DESCRIPTION CODE
BASE UNIT CPOSTBU560 WALL UNIT CPOSTSWU56720 WALL UNIT CPOSTTWU72900 WALL UNIT CPOSTTWU90
BASE UNIT LPOSTCBU18560 WALL UNIT LPOSTWU5618720 WALL UNIT LPOSTWU7218900 WALL UNIT LPOSTWU9018
MFC Continuous Plinth Supplied separate from units
Continuous Plinth
Available in white and pear
900 MFC Base/WallSpacer Panel 15mm
HEIGHT WIDTH CODE HEIGHT WIDTH CODE HEIGHT WIDTH CODE
142 2600 CONPLINTH200 2600 CONPLINTH262200 650 RET PLINTH652
142 2600 CONPLINTHMR (MOISTURE RESISTANT)
900 300 BSP390P
Plinth Connector Bracket(Use with continuous plinth)
High Plinth Bracket
CODE WIDTH CODE
BRKPLINTH 200 BRKPLINTH200
BACK, END, FILLER AND BLENDER PANELS
CORNICE AND PELMET
CORNER POSTS
MR
All dimensions in millimetres. All dimensions in millimetres.
45
mm
35
mm
55
mm
720
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 28-29 10/05/2012 11:10
30 31
Electronic Wall Unit SystemMounting frame with safety step.Order wall units separately toequal width of 1500mm
Electronic Worktop SystemElectrical vertical up and down adjustments with safety stop . Order worktop (min 950, max 1950) and worktop fascia panel (DPF18) separately.
Cranked Worktop SystemManual vertical up and down adjustments with aluminium handle. Order worktop (min 950, max 1950) and worktop fascia panel (DPF18) separately.
WIDTH CODE WIDTH CODE WIDTH CODE
1500 ROPOXMFRAME 1950 ELEHYWTSYS2 1950 CRKHYWTSYS2
HD Spot Light Can be surface or recessed fitting. Order driver LEDHDTFORM6 or LEDHDDIMMER separately
Power: 1.65w
HD square LightSurface fitting only. Order driver LEDHDTFORM6 or LEDHDDIMMER separately
Power: 1.25w
Hd Over Cabinet LightOrder driver LEDHDTFORM6 or LEDHDDIMMER separately
Power: 1.65w
CODE CODE CODE
LEDSURFHD LEDSQSURFHD LEDCORHD
HD 24v Driver with remote control on/off & dimming functionCannot be used with HD LEDDELTAHDS. Combined wattage of connected lights must not exceed driver wattage. 12 way output.
Power: 240v / 30w
Touch sensor - On/Off control / Door SensorTwo functions - use as touch on/off switch or behind a cupboard door to activate internal lighting. Cannot be used with lights with built in sensor. Use only with LEDHDTFORM6 driver
CODE CODE
LEDHDDIMMER LEDSWITCH
250mm LED Task strip lightIncludes 1m mains connection lead and clips for fitting. Each light can be linked together or with optional link cable. No driver required.
Power: 240v / 2.7w
330mm LED Task strip lightIncludes 1m mains connection lead and clips for fitting. Each light can be linked together or with optional link cable. No driver required.
Power: 240v / 4.5w
550mm LED Task strip lightIncludes 1m mains connection lead and clips for fitting. Each light can be linked together or with optional link cable. No driver required.
Power: 240v / 8w
500mm Light link cableUse to link one LED task strip to another
CODE CODE CODE CODE
LEDSTRIP25 LEDSTRIP33 LEDSTRIP55 LEDSTRIPCON
GX53 LED LightStainless steel. Surface or recessed fitting. Driver not required, connects directly to mains source.
Power: 240v / 1.65w
GX53 LED BulbReplacement GX53 LED light fitting
Power: 240v / 1.65w
CODE CODE
LEDSURFACE LEDREPBULB
Hd Delta Light Order driver LEDHDTFORM6 or LEDHDDIMMER separately
Power: 1.65w
HD square LightBuilt in on/off sensor. Can also switch up to two non sensor HD lights. Order driver LEDHDTFORM6 separately
Power: 2.15w
HD 24v DriverUse to power any combination of HD lights. Combined wattage of connected lights must not exceed driver wattage. 6 way output.
Power: 240v / 15w
CODE CODE CODE
LEDDELTAHD LEDDELTAHDS LEDHDTFORM6
LIGHTING HD LED LIGHT RANGE
LIGHTING TASK LED STRIP LIGHT RANGE
LIGHTING LED SURFACE LIGHT RANGE
Example
Example
Either standard driver or remote control driver can be used
HD Delta light with touch sensor can switch on/off up to two non-sensor HD lights. Can be used with standard driver only
Optional Touch Sensor can be used with standard driver
Example
Additional lights can also be connected via optional 500mm link cable
Additional lights can be connected directly in series
No driver required. Connects directly to mains source
Worktop Fascia Panel L-Shaped Worktop Bracket Unit Wall Support Bracket
WIDTH CODE CODE WIDTH CODE
1800 DPF18 BRKTWTOPDIS 1000 DSPLT
Pull Down BasketFor easy access to wall units110° Hinges only
Laminate Splashback Revo Aluminium Cutlery Tray
WIDTH CODE DESCRIPTION CODE WIDTH DEPTH CODE
500 SPRINGBASKCX 2440 X 600 WTSB24X6HI DEF - 2440 X 600 WTHDSB24X62440 X 1200 WTSB24X12HI DEF - 2440 X 1200 WTHDSB24X12END CAP WTSBACKENDBUTT JOINT WTSBACKBUTCORNER JOINT WTSBACKCNR
400 500 CTRAYGALL4V500 500 CTRAYGALL5V600 500 CTRAYGALL6V
ESPRIT ACCESSORIES
112
All dimensions in millimetres. All dimensions in millimetres.
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 30-31 10/05/2012 11:10
30 31
Electronic Wall Unit SystemMounting frame with safety step.Order wall units separately toequal width of 1500mm
Electronic Worktop SystemElectrical vertical up and down adjustments with safety stop . Order worktop (min 950, max 1950) and worktop fascia panel (DPF18) separately.
Cranked Worktop SystemManual vertical up and down adjustments with aluminium handle. Order worktop (min 950, max 1950) and worktop fascia panel (DPF18) separately.
WIDTH CODE WIDTH CODE WIDTH CODE
1500 ROPOXMFRAME 1950 ELEHYWTSYS2 1950 CRKHYWTSYS2
HD Spot Light Can be surface or recessed fitting. Order driver LEDHDTFORM6 or LEDHDDIMMER separately
Power: 1.65w
HD square LightSurface fitting only. Order driver LEDHDTFORM6 or LEDHDDIMMER separately
Power: 1.25w
Hd Over Cabinet LightOrder driver LEDHDTFORM6 or LEDHDDIMMER separately
Power: 1.65w
CODE CODE CODE
LEDSURFHD LEDSQSURFHD LEDCORHD
HD 24v Driver with remote control on/off & dimming functionCannot be used with HD LEDDELTAHDS. Combined wattage of connected lights must not exceed driver wattage. 12 way output.
Power: 240v / 30w
Touch sensor - On/Off control / Door SensorTwo functions - use as touch on/off switch or behind a cupboard door to activate internal lighting. Cannot be used with lights with built in sensor. Use only with LEDHDTFORM6 driver
CODE CODE
LEDHDDIMMER LEDSWITCH
250mm LED Task strip lightIncludes 1m mains connection lead and clips for fitting. Each light can be linked together or with optional link cable. No driver required.
Power: 240v / 2.7w
330mm LED Task strip lightIncludes 1m mains connection lead and clips for fitting. Each light can be linked together or with optional link cable. No driver required.
Power: 240v / 4.5w
550mm LED Task strip lightIncludes 1m mains connection lead and clips for fitting. Each light can be linked together or with optional link cable. No driver required.
Power: 240v / 8w
500mm Light link cableUse to link one LED task strip to another
CODE CODE CODE CODE
LEDSTRIP25 LEDSTRIP33 LEDSTRIP55 LEDSTRIPCON
GX53 LED LightStainless steel. Surface or recessed fitting. Driver not required, connects directly to mains source.
Power: 240v / 1.65w
GX53 LED BulbReplacement GX53 LED light fitting
Power: 240v / 1.65w
CODE CODE
LEDSURFACE LEDREPBULB
Hd Delta Light Order driver LEDHDTFORM6 or LEDHDDIMMER separately
Power: 1.65w
HD square LightBuilt in on/off sensor. Can also switch up to two non sensor HD lights. Order driver LEDHDTFORM6 separately
Power: 2.15w
HD 24v DriverUse to power any combination of HD lights. Combined wattage of connected lights must not exceed driver wattage. 6 way output.
Power: 240v / 15w
CODE CODE CODE
LEDDELTAHD LEDDELTAHDS LEDHDTFORM6
LIGHTING HD LED LIGHT RANGE
LIGHTING TASK LED STRIP LIGHT RANGE
LIGHTING LED SURFACE LIGHT RANGE
Example
Example
Either standard driver or remote control driver can be used
HD Delta light with touch sensor can switch on/off up to two non-sensor HD lights. Can be used with standard driver only
Optional Touch Sensor can be used with standard driver
Example
Additional lights can also be connected via optional 500mm link cable
Additional lights can be connected directly in series
No driver required. Connects directly to mains source
Worktop Fascia Panel L-Shaped Worktop Bracket Unit Wall Support Bracket
WIDTH CODE CODE WIDTH CODE
1800 DPF18 BRKTWTOPDIS 1000 DSPLT
Pull Down BasketFor easy access to wall units110° Hinges only
Laminate Splashback Revo Aluminium Cutlery Tray
WIDTH CODE DESCRIPTION CODE WIDTH DEPTH CODE
500 SPRINGBASKCX 2440 X 600 WTSB24X6HI DEF - 2440 X 600 WTHDSB24X62440 X 1200 WTSB24X12HI DEF - 2440 X 1200 WTHDSB24X12END CAP WTSBACKENDBUTT JOINT WTSBACKBUTCORNER JOINT WTSBACKCNR
400 500 CTRAYGALL4V500 500 CTRAYGALL5V600 500 CTRAYGALL6V
ESPRIT ACCESSORIES
112
All dimensions in millimetres. All dimensions in millimetres.
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 30-31 10/05/2012 11:10
32 33
WORKTOPS
Bullnose Worktops Bullnose Worktops Double Bullnose Worktops Double Bullnose Worktops
Depth: up to 600mm Max Length: 3500mm Depth: 601-870mm Max Length: 2950mm
Depth: up to 600mm Max Length: 4000mm Depth: 601-870mm Max Length: 3500mm
Depth: 665 or 900mm Max Length: 3000mm
Depth: 665mm Max Length: 4000mm Depth: 900mm Max Length: 3600mm
THICKNESS CODE THICKNESS CODE THICKNESS CODE THICKNESS CODE
30MM PF30 40MM PF40 30MM DP30 40MM DP40
WORKTOP JOINTING STRIP AND END
L-Shape Worktop Joint Strip T-Shape Worktop Joint Strip
To join two worktops together to form a corner L-shape (600 deep) To butt two lengths of worktops together (600 deep)
THICKNESS COLOUR CODE THICKNESS COLOUR CODE
30MM ALUMINIUM STRIPALP30640MM BLACK, BROWN, STRIPALP4010 ALUMINIUM
30MM ALUMINIUM STRIPALT30640MM BLACK, BROWN, STRIPALT4010 ALUMINIUM
End Caps Tileguard Aluminium Tiling Strip
(600 deep)
(Supplied in 3m lengths)
THICKNESS COLOUR CODE THICKNESS CODE
30MM ALUMINIUM STRIPALS30640MM BLACK, BROWN, STRIPALS4010 ALUMINIUM
30MM TILESTRIP3040MM TILESTRIP40
A bolt pack can be ordered to facilitate site assembly of joints. Code MASONPACK
R 60
R 6
14mm
27.5mm
0.5mm
R 6
1
2
3
6
9
7
4
5
30MM
38
mm
Co
re 1
8
4
5
2
6
9
3
40MM
1. High pressure decorative laminate for extra impact & wear resistance, manufactured to BS EN 438.
2. Chipboard manufactured to BS EN 312 Part 3, P2 Grade.
3. Back edges are sealed by wax impregnation coating, for maximum protection against moisture.
4. Front edge bullnosed with a wrap under laminate to offer a drip barrier against water ingress.
5. Rebated underside on the front edge with a polyurethane resin applied as a moisture barrier.
6. Resin impregnated backing paper to resist moisture and prevent warping.
7. 30mm has a 6mm radius topand bottom.
8. 40mm has a 10mm radius topand bottom.
9. Moisture resistant option manufactured to BS EN 312 Part 3, P3 Grade.
BULLNOSE WORKTOPS
MASON MITRE JOINTS
Worktops can also be supplied with a
factory cut mitred joint and jointing bolts
for assembly on site.
WORKTOP MASON MITRE PLANNER
600mm deep – 4000mm max. length.
Double postformed up to
900mm deep – 4000mm max. length.
Please allow an extra 23mm for male to
female connections and an extra 30mm for
corner post situations.
WORKTOP MASON MITRE PLANNER 650MM DEEP
Please allow an extra 23mm for male to
female connections and an extra 30mm for
corner post situations.
Can be used in conjunction with 600mm
deep mitres.
WORKTOP RADIUS END DIAGRAM
Maximum length for double postformed up
to 900mm deep – 4000mm. Current radius
end variations.
31
All dimensions in millimetres. All dimensions in millimetres.
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 32-33 10/05/2012 11:10
32 33
WORKTOPS
Bullnose Worktops Bullnose Worktops Double Bullnose Worktops Double Bullnose Worktops
Depth: up to 600mm Max Length: 3500mm Depth: 601-870mm Max Length: 2950mm
Depth: up to 600mm Max Length: 4000mm Depth: 601-870mm Max Length: 3500mm
Depth: 665 or 900mm Max Length: 3000mm
Depth: 665mm Max Length: 4000mm Depth: 900mm Max Length: 3600mm
THICKNESS CODE THICKNESS CODE THICKNESS CODE THICKNESS CODE
30MM PF30 40MM PF40 30MM DP30 40MM DP40
WORKTOP JOINTING STRIP AND END
L-Shape Worktop Joint Strip T-Shape Worktop Joint Strip
To join two worktops together to form a corner L-shape (600 deep) To butt two lengths of worktops together (600 deep)
THICKNESS COLOUR CODE THICKNESS COLOUR CODE
30MM ALUMINIUM STRIPALP30640MM BLACK, BROWN, STRIPALP4010 ALUMINIUM
30MM ALUMINIUM STRIPALT30640MM BLACK, BROWN, STRIPALT4010 ALUMINIUM
End Caps Tileguard Aluminium Tiling Strip
(600 deep)
(Supplied in 3m lengths)
THICKNESS COLOUR CODE THICKNESS CODE
30MM ALUMINIUM STRIPALS30640MM BLACK, BROWN, STRIPALS4010 ALUMINIUM
30MM TILESTRIP3040MM TILESTRIP40
A bolt pack can be ordered to facilitate site assembly of joints. Code MASONPACK
R 60
R 6
14mm
27.5mm
0.5mm
R 6
1
2
3
6
9
7
4
5
30MM
38
mm
Co
re 1
8
4
5
2
6
9
3
40MM
1. High pressure decorative laminate for extra impact & wear resistance, manufactured to BS EN 438.
2. Chipboard manufactured to BS EN 312 Part 3, P2 Grade.
3. Back edges are sealed by wax impregnation coating, for maximum protection against moisture.
4. Front edge bullnosed with a wrap under laminate to offer a drip barrier against water ingress.
5. Rebated underside on the front edge with a polyurethane resin applied as a moisture barrier.
6. Resin impregnated backing paper to resist moisture and prevent warping.
7. 30mm has a 6mm radius topand bottom.
8. 40mm has a 10mm radius topand bottom.
9. Moisture resistant option manufactured to BS EN 312 Part 3, P3 Grade.
BULLNOSE WORKTOPS
MASON MITRE JOINTS
Worktops can also be supplied with a
factory cut mitred joint and jointing bolts
for assembly on site.
WORKTOP MASON MITRE PLANNER
600mm deep – 4000mm max. length.
Double postformed up to
900mm deep – 4000mm max. length.
Please allow an extra 23mm for male to
female connections and an extra 30mm for
corner post situations.
WORKTOP MASON MITRE PLANNER 650MM DEEP
Please allow an extra 23mm for male to
female connections and an extra 30mm for
corner post situations.
Can be used in conjunction with 600mm
deep mitres.
WORKTOP RADIUS END DIAGRAM
Maximum length for double postformed up
to 900mm deep – 4000mm. Current radius
end variations.
31
All dimensions in millimetres. All dimensions in millimetres.
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 32-33 10/05/2012 11:10
34 35
Level H is the performance standard for
Heavy Domestic Use, a vital requirement for
social housing applications. Kubix 15mm
and 18mm kitchen cabinets to BS EN 312-
P2 and P3 comply with the requirements of
BS 6222 Part 2 Level H, which
includes demanding tests to ensure fi tness
for purpose.
CABINET AND SURFACE STRENGTH
As part of BS 6222 Part 2 Level H, Kubix
15mm and 18mm cabinets undergo the
most stringent test procedures to certify
fi tness for purpose in social housing
applications and a long life of unfailing
service. For example, the cabinet and frame
are subjected to demanding forces, greater
than encountered in everyday domestic
use, to ensure their strength and integrity.
The ability of the rails to withstand sudden
lifting is tested, with Level H allowing no
component failure. Tests for the strength of
the top and bottom surfaces replicate the
effect of someone sitting on the worktop
or standing on the bottom ledge to
reach something.
SHELVES, DOORS AND HINGES
For the storage parts, the strength of the
shelf supports and the capacity of the
shelves to take a full load with minimal
defl ection are stringently assessed.
To make sure they can cope with the
constant heavy use, doors and their
hinges are tested for strength, wear and
fatigue, as well as repeated slamming,
open and shut actions. For example, doors
are opened and closed 40,000 times for
the domestic environment, and 80,000
times for heavy domestic use in the social
housing market.
DRAWERS AND HANDLES
Drawers are submitted to equally
uncompromising assessment, including
downward load while open, slam shut and
open, the strength of the drawer bottom,
and general wear and fatigue. Flaps on
doors that open downwards are tested to
represent a person leaning on the fl ap. To
test the strength of runners, a drawer is
loaded and an increasing vertical force is
applied to one corner.
Even the handles are strength tested, with
no component failure permitted.
SURFACE DURABILITY
Kubix frontals have been tested to FIRA
gold award standard for durability.
The performance of the surface fi nish is
put to the test to ensure stain resistance
to day-to-day spillages such as juices, oil
and coffee, as well as household chemicals
such as ammonia and disinfectant. Impact
resistance to scratches and dents is also
tested replicating the effect of a heavy pan
being dropped onto a surface or a sharp
knife.
FSC®
Symphony has gained full chain of custody
from the Stewardship Council (FSC®). This
indicates that timber used in our products
comes from well managed sources, and
complies with environmental, social and
economical standards.
FISP
The Furniture Industry Sustainability
Programme supports and improves the
furniture industry’s sustainability credentials
and has rapidly become established as the
industry forum on all environmental and
sustainable issues.
PERFORMANCE TESTING/GREEN CREDENTIALS
The only recognised British Standard for the strength and
performance of kitchen furniture is BS 6222 Part 2 Level H.
CARE AND ATTENTION
UNITS
Screws fi ttings should be checked regularly
to ensure that they are secure to prevent
excess strain on the furniture. Do not place
heavy weights on partially open doors or
drawers.
Avoid using strong chemicals or abrasive
cleaners. Simply use warm water with a
mild detergent and a damp cloth to clean.
Once cleaned, remove any excess moisture
with a clean, dry cloth.
FRONTALS
Frontals should be treated with care
to maintain their good looks and
performance. Never use abrasive cleaners
or strong chemicals on furniture. Melamine
and laminates are best cleaned with a
damp cloth, warm water and a mild
detergent. Do not allow water to stand
on surfaces, always wipe dry immediately
with a soft, clean cloth. Clean and protect
with furniture polish. Prevent marking or
scratching by eliminating the risk of contact
from sharp or heavy objects.
UNITS
• Always use a cutting board –
sharp knives can damage any
laminate surface.
• Apply a light coating of a non-oily
furniture polish to help hide fi ne
scratches, e.g. Pledge Clean
and Dust.
WORKTOPS - CLEANING STAINS
Always start by trying the most gentle
method. If stains persist, work through the
following steps, repeating each method if
the stain appears to be disappearing.
STEP 1.
For routine cleaning, use a damp cloth or
sponge and a mild soap or detergent.
STEP 2.
For diffi cult stains apply a mild non-abrasive
household cleaner/detergent with a soft
bristled brush.
STEP 3.
If stubborn stains persist, try a paste
of baking soda and water, or a
non-scratch cleaner such as Cif Active
Cream or Flash All Purpose, scrubbing
lightly with a soft bristled brush for
10 to 20 seconds.
STEP 4.
Apply undiluted household bleach or nail
polish remover, let stand for no longer
than 2 minutes, and rinse thoroughly with
warm water. This step may be repeated if
the stain appears to be going away and
the colour of the laminate has not been
affected.
Warning: Do not expose the surface
to household bleach for prolonged
periods, which may result in permanent
discoloration.
WORKTOPS - HEAT
• Never place hot pans, dishes or
heat producing appliances directly on
worktops.
• Always use a heat shield, hot pad or
trivet to avoid blistering or cracking of
laminate surface.
WORKTOPS - SPECIAL DO’S AND DON’TS
DO: Always rinse thoroughly after
cleaning – residue from cleaning solutions
is the single greatest cause of damage to a
laminate surface.
DO: Wipe up spills right away and rinse
thoroughly, particularly harsh chemical
liquids such as oven cleaners, drain cleaners
containing caustic soda, rust removers and
toilet bowl cleaners.
DO NOT: Use acidic or abrasive cleaners –
they can damage laminate surfaces.
DO NOT: Expose the surface to household
bleach for prolonged periods which may
result in permanent discoloration.
DO NOT: Apply excessive scrubbing,
especially on surfaces with a gloss fi nish.
Kubix kitchen furniture is designed to provide many years of reliable
service. To help keep it that way here are some simple guidelines.
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 34-35 10/05/2012 11:10
34 35
Level H is the performance standard for
Heavy Domestic Use, a vital requirement for
social housing applications. Kubix 15mm
and 18mm kitchen cabinets to BS EN 312-
P2 and P3 comply with the requirements of
BS 6222 Part 2 Level H, which
includes demanding tests to ensure fi tness
for purpose.
CABINET AND SURFACE STRENGTH
As part of BS 6222 Part 2 Level H, Kubix
15mm and 18mm cabinets undergo the
most stringent test procedures to certify
fi tness for purpose in social housing
applications and a long life of unfailing
service. For example, the cabinet and frame
are subjected to demanding forces, greater
than encountered in everyday domestic
use, to ensure their strength and integrity.
The ability of the rails to withstand sudden
lifting is tested, with Level H allowing no
component failure. Tests for the strength of
the top and bottom surfaces replicate the
effect of someone sitting on the worktop
or standing on the bottom ledge to
reach something.
SHELVES, DOORS AND HINGES
For the storage parts, the strength of the
shelf supports and the capacity of the
shelves to take a full load with minimal
defl ection are stringently assessed.
To make sure they can cope with the
constant heavy use, doors and their
hinges are tested for strength, wear and
fatigue, as well as repeated slamming,
open and shut actions. For example, doors
are opened and closed 40,000 times for
the domestic environment, and 80,000
times for heavy domestic use in the social
housing market.
DRAWERS AND HANDLES
Drawers are submitted to equally
uncompromising assessment, including
downward load while open, slam shut and
open, the strength of the drawer bottom,
and general wear and fatigue. Flaps on
doors that open downwards are tested to
represent a person leaning on the fl ap. To
test the strength of runners, a drawer is
loaded and an increasing vertical force is
applied to one corner.
Even the handles are strength tested, with
no component failure permitted.
SURFACE DURABILITY
Kubix frontals have been tested to FIRA
gold award standard for durability.
The performance of the surface fi nish is
put to the test to ensure stain resistance
to day-to-day spillages such as juices, oil
and coffee, as well as household chemicals
such as ammonia and disinfectant. Impact
resistance to scratches and dents is also
tested replicating the effect of a heavy pan
being dropped onto a surface or a sharp
knife.
FSC®
Symphony has gained full chain of custody
from the Stewardship Council (FSC®). This
indicates that timber used in our products
comes from well managed sources, and
complies with environmental, social and
economical standards.
FISP
The Furniture Industry Sustainability
Programme supports and improves the
furniture industry’s sustainability credentials
and has rapidly become established as the
industry forum on all environmental and
sustainable issues.
PERFORMANCE TESTING/GREEN CREDENTIALS
The only recognised British Standard for the strength and
performance of kitchen furniture is BS 6222 Part 2 Level H.
CARE AND ATTENTION
UNITS
Screws fi ttings should be checked regularly
to ensure that they are secure to prevent
excess strain on the furniture. Do not place
heavy weights on partially open doors or
drawers.
Avoid using strong chemicals or abrasive
cleaners. Simply use warm water with a
mild detergent and a damp cloth to clean.
Once cleaned, remove any excess moisture
with a clean, dry cloth.
FRONTALS
Frontals should be treated with care
to maintain their good looks and
performance. Never use abrasive cleaners
or strong chemicals on furniture. Melamine
and laminates are best cleaned with a
damp cloth, warm water and a mild
detergent. Do not allow water to stand
on surfaces, always wipe dry immediately
with a soft, clean cloth. Clean and protect
with furniture polish. Prevent marking or
scratching by eliminating the risk of contact
from sharp or heavy objects.
UNITS
• Always use a cutting board –
sharp knives can damage any
laminate surface.
• Apply a light coating of a non-oily
furniture polish to help hide fi ne
scratches, e.g. Pledge Clean
and Dust.
WORKTOPS - CLEANING STAINS
Always start by trying the most gentle
method. If stains persist, work through the
following steps, repeating each method if
the stain appears to be disappearing.
STEP 1.
For routine cleaning, use a damp cloth or
sponge and a mild soap or detergent.
STEP 2.
For diffi cult stains apply a mild non-abrasive
household cleaner/detergent with a soft
bristled brush.
STEP 3.
If stubborn stains persist, try a paste
of baking soda and water, or a
non-scratch cleaner such as Cif Active
Cream or Flash All Purpose, scrubbing
lightly with a soft bristled brush for
10 to 20 seconds.
STEP 4.
Apply undiluted household bleach or nail
polish remover, let stand for no longer
than 2 minutes, and rinse thoroughly with
warm water. This step may be repeated if
the stain appears to be going away and
the colour of the laminate has not been
affected.
Warning: Do not expose the surface
to household bleach for prolonged
periods, which may result in permanent
discoloration.
WORKTOPS - HEAT
• Never place hot pans, dishes or
heat producing appliances directly on
worktops.
• Always use a heat shield, hot pad or
trivet to avoid blistering or cracking of
laminate surface.
WORKTOPS - SPECIAL DO’S AND DON’TS
DO: Always rinse thoroughly after
cleaning – residue from cleaning solutions
is the single greatest cause of damage to a
laminate surface.
DO: Wipe up spills right away and rinse
thoroughly, particularly harsh chemical
liquids such as oven cleaners, drain cleaners
containing caustic soda, rust removers and
toilet bowl cleaners.
DO NOT: Use acidic or abrasive cleaners –
they can damage laminate surfaces.
DO NOT: Expose the surface to household
bleach for prolonged periods which may
result in permanent discoloration.
DO NOT: Apply excessive scrubbing,
especially on surfaces with a gloss fi nish.
Kubix kitchen furniture is designed to provide many years of reliable
service. To help keep it that way here are some simple guidelines.
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 34-35 10/05/2012 11:10
1
Kubix Product Specifi cation GuideKitchens for Living
Kubix
The Symphony Group Plc
Pen Hill Estate,
Park Spring Road, Barnsley
South Yorkshire, S72 7EZ
Tel: 01226 446000
Fax: 01226 711185
www.symphony-group.co.uk
In keeping with our policy of continuous product development, we reserve the right
to change colours, designs, materials, descriptions or methods of manufacture. Such
changes may be made without notice and without incurring any liability. Nothing
in this publication should be considered to be part of any contract. The illustrations
included in this publication are to indicate general format and are not necessarily
correctly scaled, proportioned or detailed.
Natural wood is used in some of our kitchens. As a natural material, wood refl ects
the endless variety of grains and textures found in nature and such variances can be
expected in any selection of timber fronted units. Timbers mellow when exposed to
sunlight, so a colour change can be expected.
PVC laminates and melamine fi nishes are also subject to slight colour change over
a period of years. Unless specifi ed otherwise, the expression ‘solid timber’ refers to
door and drawer fronts only. A copy of our conditions of sale is available on request.
Errors and omissions excepted.
Copyright and all other rights in this brochure and the photographs and other works
upon which it is based, are owned by The Symphony Group PLC. No part of the
brochure and said photographs and other works may be reproduced or transmitted
in any form or by any means (including but not limited to photocopying or storing
in any electronic medium) without the prior express written permission of The
Symphony Group PLC.
© The Symphony Group Plc 2012
Ref. KUSPECMAY12
When you have fi nished with this brochure please recycle it
Creating the perfect living space
114753_Kubix_Spec_Guide_2012_newpag-36pp.indd 40-1 10/05/2012 11:08