kubota diesel tractor m m96s m108s -...
TRANSCRIPT
R
K U B O TA D I E S E L T R A C T O R
M M96S/M108SNew styling, a cleaner running engine and all the poweryou’ve come to expect from our M-Series tractors.
Swing Shift & Swing ShiftPlus
ダミー 06.9.20 3:53 PM ページ 2
The turbocharged M96S and M108S allow you to take on a variety of tasks.
Ideal for hay and cattle operations, these economical machines are also
great for dairy uses, forage, mowing and more. And not only are these new
tractors versatile, they also feature a brand new hood design, which you’ve
probably already noticed, and the M108S boasts cleaner engine emissions,
which you'll surely notice once you drive it. Add these to an array of other
improvements, including higher horsepower engines, more powerful PTOs
and increased loader capacity, and the mid-size M96S and M108S just may
be the most productive, hard-working tractors in their class.
With the new, redesigned running Kubota, the sky’s
ダミー 06.9.20 4:00 PM ページ 3
gned and cleanersky’s the limit.
ダミー 06.9.20 4:00 PM ページ 4
The M96S and the M108S are built with thepower and durability to take on even themost heavy-duty tasks. This is due to their4-valve, Electronic Center Direct InjectionSystem engines, which help them realizegreater pulling power.
ENGINEENGINE
TO
RQ
UE
FU
EL
60
90
80
70
100
110
120
300
90
75
60
45
400
500
N・mlbf・ft
ENGINE SPEED rpm
Model : M108S M105S
HPkw
g/kw・hlb/HP・h
2200.36
0.40
0.44
240
200
260
240
400
200
300
250
350
1200 1400 1600 1800 2000 2200 2400
EN
GIN
E N
ET
PO
WE
R
The engine of the M108S has beenredesigned and reengineered. Ofcourse, it boasts the same durabilityand quality you’ve come to expect fromKubota E-CDIS diesel engines. But,this new turbocharged engine is nowcleaner than ever before, offeringhigher torque and incredible pullingpower. The CRS (Common RailSystem) and Cooled EGR (ExhaustGas Recirculation) System reduceemissions, helping with compliance toU.S. EPA Tier III emissions regulations.We’ve increased horsepower to 108 on the M108S and PTO power from 93to 96HP. These are big changes for abig tractor, and ones you’ll certainlyobserve out in the field.
NEW!M108S Engine
ダミー 06.9.20 4:00 PM ページ 5
M108S engine
M96S Engine
Sensor
ECUInjector
Supply pump
Common rail
CRS (Common Rail System)
Typically found in automobiles to help reduce emissions and decrease fuelconsumption, CRS has been implemented on our M108S engine toaccomplish the same results. The CRS electronically controls the timing andamount of fuel injection. By delivering high-pressure injections in stages,rather than all at once, an optimal combustion rate is achieved, thus offeringgreater efficiency in the cylinder. This equates into less combustion noise,commonly known as “diesel knocks”, better fuel efficiency and cleaneremissions. By controlling the amount offuel injection, the CRS also serves toprovide greatertorque so thatoperations in themid-to-highrevolution range,such as baling,can be performedmore smoothly.
Cooled EGR System
Our Cooled EGR (Exhaust Gas Recirculation) Systemaims at the same end as the CRS; to reduce noxiousemissions. Specifically, the Cooled EGR System reducessmog-producing nitrogen oxides by lowering thecombustion temperature. It accomplishes this by divertingexhaust gas through a cooler and then returning it to thecombustion chambers, where the cooled gases minimizetemperatures and hamper nitrogen oxide formation.
Inlet
Coolant outletCoolant inlet
Exhaust
EGR valve
Lead valve
Inlet manifold
Put the M96S into gear and you’llimmediately see that this 95horsepower engine will give you allthe strength you need. You’ll feelthis in all applications, butyou’ll especially notice it whenpulling heavy loads. TheM96S’s engine specs alsoboast a PTO output of 84horsepower, low fuelconsumption and it meetsEPA Tier II emissionregulations. Best of all,this engine comesstandard with legendaryKubota reliability.
ダミー 06.9.20 4:00 PM ページ 6
Swing ShiftOur “Swing Shift” gives you access to a total of 16 speeds! Thesynchronized main shift’s “H” pattern puts four speeds immediately atyour disposal. The Swing Shift adds to that by actuating the electric-over-hydraulic high/low synchronized range shift for a total of eightspeeds—all controlled by a single lever. If a task requires more thaneight speeds, simply move the auxiliary range leverleft of the seat for eight more to equal 16F/16R.An optional, simple-to-install, cassette-typecreep provides eight additional slowerspeeds. That’s 24 speeds—enough for the most demanding and precise work.
Iconographic indicators showhigh/low range of the Swing Shift.
F16 x R16
F32 x R32
Photo shows Swing Shift Plus (Cab model).
Swing Shift Plus with Dual SpeedSwing Shift Plus models give you 32F/32R speeds, and allow you to operate theSwing Shift as well as the Dual Speed with just one lever. Should your load suddenlyget heavier, just push the Dual Speed’s high/low button while still in motion. Yourspeed will reduce by 17%, but lugging force will dramatically increase. Put thisfeature to best use when taking on large load increases, when working in mixed soilor during hay tool applications. Combining the Dual Speed with the optional creepprovides 16 additional slower speeds—a total of 48F/48R—for specialty applications.(Swing Shift Plus with Dual Speed not available on all models. See specs for details.)
SWING
SHIFT
PLUSTRANSMISSIONTRANSMISSION
Hydraulic Shuttle ShiftMounted on the left side of thesteering column, the shuttle lever’sfingertip control makes it possible toshift smoothly from forward toreverse without using the clutch orstopping the tractor. This makes frontloader operation significantly easier.
Multiple Wet-discMain ClutchOur multiple wet-discmain clutch ensuressmooth and effortlessoperation and offersgreater durability.
ダミー 06.9.20 4:12 PM ページ 7
Hydrostatic PowerSteeringWhen performing tasks thatplace a heavy weight on thefront wheels, such as loaderwork, our light-touch powersteering helps make work much less strenuous.
Heavy-duty Front AxleThe M96S and M108S areequipped with the same ruggedfront axle found on largertractors. So you can rest easyknowing that you can count onreliable performance, evenwhen using the front loader.
Hydraulic BrakesAll it takes is a light touch toactivate these highlyresponsive, hydraulic, wet-type brakes. This feature helpsto reduce operator fatigue.
Extended WheelbaseThe extended wheelbasegives these tractors a lowercenter of gravity, directlyequating to exceptionalstability and pulling power.
Tire Options To enable the M96S and M108Stractors to perform their best, weoffer a variety of tires, includingcast iron discs.
Easy to Shift 4WDEngagementStay moving and stay productive byswitching the 4-wheel drive on andoff without stopping, even whenmoving out of a field onto a road.(Do not engage while carryingheavy loads, or when a rear wheelhas lost traction.)
Easy Step TiltSteering WheelFind the position mostcomfortable for you. Step onthe pedal; tilt the wheel toselect from among five wheelpositions, and then lock it inplace. Simply step on thepedal again to unlock thewheel for easy tractormounting and dismounting.
ダミー 06.9.20 4:12 PM ページ 8
Foldable ROPS (ROPS Model)A foldable Rollover Protective Structure (ROPS) comesstandard on the M96S and M108S. The ROPS can easilybe folded down without tools so that the tractor may passunder areas with height constraints, such as doorways orlow branches. (There is no operator protection provided bythe ROPS in the folded position. For operator safety, theROPS should be placed in the upright and locked positionand the seat belt fastened for all other operations.)
Slanted Full-open HoodThe slant-nosed, full-open hood design makesmaintenance a snap, as the one-piece hood’s dualgas shock assist enables it to lift up easily. Thisdesign feature also improves operator visibilityover the center of the tractor hood for safer andmore efficient working conditions. The curveddesign also provides a sleeker overall appearance.
Side-mounted Exhaust PipeThe side-mounted exhaust pipe maximizes your fieldof view, allowing you to see more of what’s in frontand to the side of your work area.
The new instrument panel makes viewing the vital functions of thetractor clear and easy. The LCD readout displays travel speed,PTO revolution and hour meter information digitally. Illuminatedanalog indicators include a large tachometer, temperature gaugeand fuel gauge. A battery warning light has also been added tothese tractors to prevent surprise battery failures, as well asindicator lights for 4WD engagement, PTO and oil pressure.
DESIGN, COMFORT AND SAFETYDESIGN, COMFORT AND SAFETYInstrument Panel with LCD Readout
ダミー 06.9.20 4:13 PM ページ 9
Wrap Around Front GrillThe specially designed grill offers awide coverage area, which helps tocool the engine better. At the sametime, the grill design minimizes theoverall air intake velocity, whichreduces clogging of grass and dirt.
New Halogen Headlightswith Corner LampsWe've mounted the headlights highto improve visibility, even duringloader work. These halogen lightswith corner lamps are efficient andprovide excellent illumination.
Air Cleaner with Built-inPre-cleanerThis air cleaner will help protectyour engine when operating yourKubota M96S or M108S inparticularly dirty or dusty areas.
Extra-wide Operator PlatformThe M96S and M108S boast a wideplatform that offers more legroom forgreater operator comfort.
ダミー 06.9.20 4:13 PM ページ 10
Independent PTOThe PTO clutch enables the implement drive system to engagesmoothly, which helps reduce operator fatigue. And because thePTO is independent, you don’t have to stop the tractor to engageor disengage the PTO, saving time no matter what the task.
Standard SCD Valve
SCD Valve
FD Valve
OptionFlow Control Valve (For 3-point hitch to valve operation)
Flow Control Valve with SCD(For valve to valve operation)
Corner-post Exhaust Pipe (Cab Model) All of our cab models feature acorner-post exhaust pipe, whichgives the operator anunobstructed field of view.HYDRAULICS
AND PTOHYDRAULICSAND PTO
Heavy-duty DrawbarThis rugged and dependable drawbar,usually found on higher-end models, hasthe muscle it takes to tackle your toughesttasks, such as pulling heavy trailers.
3-point HitchThe category II 3-point hitch provides fast and easyattachment of rear-mounted implements. The hitch’stelescopic stabilizers and lower link ends make hookup and adjustments simple and worry-free.
Auxiliary RemoteControl ValvesOne remote valve (SCD) isstandard on both the M96S andM108S. With the optional flowcontrol valve installed, you cansimultaneously operate the 3-pointhitch and one remote valve, or tworemote valves. Up to three remotevalves can be installed in total.
*SCD valve (standard) and Flow ControlValve with SCD (optional).
Floating Lift RodsFloating lift rods are standard on the M96S andM108S. The rods offer a smoother ride andenhanced traction while using the 3-point hitch,especially on uneven terrain.
ダミー 06.9.20 4:13 PM ページ 11
DeluxeSuspension SeatOur cab’s deluxe suspensionseat, with optional air ridesuspension, is as comfortable asits name implies. This contoured,high-back seat is ergonomicallydesigned to reduce fatigue, evenafter long workdays.
High Quality Air ConditionerOur air conditioning systemboasts nine air outlets, a dual-levelair function and a stronger force ofair—to keep you cool even on thehottest days.
Slide-out AC CondenserWhen they require cleaning, thesliding, louverless-type ACcondenser and condenser net canbe removed easily and quickly.
C A BC A B
Radio/Cassette/CD ReadySpeakers, antenna and wireharness are preinstalled for easyhookup.
Front-opening Side GlassThe glass panels on the side of thetractor now open from the front,providing better interior air flow.
ダミー 06.9.20 4:13 PM ページ 12
More Capacity & Greater HeightWe’ve increased the capacity and the maximum liftheight of the loader to give you more power, reachand versatility. The loader’s lifting capacity hasbeen increased to a whopping 3,086 lbs.—perfectfor heavy-duty bucket work. The loader’s maximumheight was raised to over 12ft, which will come inhandy when using a pallet fork or bale spear.
4-bar LinkageThe 4-bar bucket linkage increasesthe rollback and dumping angle forquicker scooping and dumping.
Joystick ControlThe joystick offers you the ability to control themovement and speed of the loader with a single lever.The joystick tower also adjusts vertically, towards oraway from the operator, and locks in place. Thisallows you to easily find your best working position.The Series Circuit makes simultaneous boom andbucket operation possible, while the RegenerativeBucket Dump Circuit enables quick dumping forefficient operation with quick cycle times.
Rubber CapsRubber caps help to prevent grease drips,keeping the operator’s clothes clean. Theyalso give the loader a more appealing look.
Bucket DesignA recent design improvement in the loaderbucket is its round back. This feature increasesthe durability of the bucket, helps keep wetmaterials from sticking in the corners andmakes dumping sand and soil easier.
Kubota Shockless Ride (KSR)The KSR helps to minimize fatigueby “smoothing out” the ride of thetractor. This feature is particularlyuseful when your tasks include a lotof tight turns or lifting and dumpingof heavy loads. It makes handlinground bales far less jarring.
Protected Cylinder TubesTo protect the tractor’s hydraulicsand offer the operator greatervisibility, we’ve neatly tucked thehydraulic tubes inside the loader’sboom. Hydraulic tube coversprovide further protection fromwear and tear.
Frame DesignThe loader’s thick steel frame hasbeen simplified by removingbraces and connectors. Thisredesign reduces the effort andtime it takes to attach the loaderand offers increased visibility.
FRONT LOADER OPTION
NEW FRONT LOADERNEW FRONT LOADER
Lifting Power and Height AdjustmentsTwo separate boom cylinder fulcrum points (Powerposition and Height position) give you the option toincrease the loader’s lifting power or height basedon your needs. When using the pallet fork or balespear you may want to set the fulcrum to give youmore height. For bucket work, a lower setting offersmore power.
ダミー 06.9.20 4:54 PM ページ 13
Quick-mount Attach/DetachAttach or detach the front loader with ease andwithout the use of tools. Simply utilize the boom standand mounting pins to quickly ready your tractor for itsnext job. A single-lever Hydraulic Quick Coupler(optional), available for the loader’s hydraulic fittings,allows you to release all four lines at once.
ModelTractor ApplicationsBoom Cylinder Fulcrum
Maximum Lift Height (Pivot Pin)
Clearance w/Attachment Dump
Reach @ Maximum HeightMaximum Dump Angle
Reach w/Attachment on Ground
Maximum Rollback Angle Digging Depth (When Bucket is Level)
Overall Height in Carry Position
Material Bucket Width/Capacity (Heaped)
Lift Capacity (Bucket Center)
Raising Time to Full Height w/out Load *1)
Lowering Time w/out Load (Powerdown) *1)
Attachment Rollback Time
Attachment Dumping Time
in. (mm)
in. (mm)
in. (mm)
degrees
in. (mm)
degrees
in. (mm)
in. (mm)
in. /cu.ft. (m3)
lbs. (kg)
seconds
seconds
seconds
seconds
LA1403
M96S, M108SHeight Position
145.7 (3700)
112.6 (2860)
23.6 (600)
52
Power Position
132.7 (3370)
98.0 (2490)
38.6 (980)
63
87.8 (2230)
40
2.4 (60) 2.6 (65)
66.9 (1700)
72 / 19.43 (0.55), 84 / 22.60 (0.64)
2976 (1350) 3086 (1400)
4.2
2.9
2.22.4
*1)w/ Standard Valves.
LOADER SPECIFICATIONS
Single-lever Hydraulic Quick CouplerThe optional quick coupler allowsthe operator to attach all four hosesat once. This makes attaching anddetaching fast and easy, even whenyou’re doing it often.
3rd Function ValveOperated with buttons located onthe grip of the joystick, the 3rdfunction valve broadens thecapability of the front loader. It alsoenables the simultaneous operationof the bucket and loader boom,allowing smooth and easy operation.
DER OPTIONS
Hydraulic Self-levelingValveThis optional feature allowsthe operator to raise or lowerthe loader boom withoutchanging the angle of thebucket. This will help preventspills when carrying soil orsand and will make pallethandling smooth and easy.
Skid Steer-type QuickCouplerA standard feature on the M96Sand M108S loader, this couplermakes attaching and detachingbuckets, bale spears and palletforks as easy as can be.
ダミー 06.9.20 4:54 PM ページ 14
V3800-DI-T
Center direct injection (E-CDIS), liquid cooled 4-cylinder diesel
Turbocharged
2600
95 (70.9)
84 (62.7)
230 (3769)
46 (175)
Dry, dual-element
45
16 forward /16 reverse (24 forward/24 reverse w/optional creep)
8/Fully synchronized (with swing shift)
2-speeds
Steering column-mounted lever
Hydraulic wet discs /Hydraulic wet discs
Rear
Hydraulic independent PTO with PTO brake, wet discs
540 rpm (540/1000 factory option)
17.2 (65)
Telescopic lower link ends, Telescopic stabilizers
II
Position, draft (top link sensing) & mix control
4630 (2100), 7490 (3400) w/dual assist cylinders (optional)
1 standard (2nd, 3rd & flow control valve optional)
-
Hydrostatic power steering
Single piece full open hood, twin gas shock assist
ISO-mounted full flat deck with rubber mat /hanging pedals
10.00-16/18.4-30
160 (4120)
103 (2620)/79 (2015)
91 (2315)
95.9 (2435)
15.2 (385)
60.6-80.3 (1540-2040)
67.7-79.5 (1720-2020)
12.5 (3.8)
6261 (2840)
32 forward /32 reverse (48 forward/48 reverse w/optional creep)
Front & Rear
Bevel gear type
12.4-24/18.4-30 Cast
93 (2355)
59.8-63.8 (1520-1620)
67.1-81.1 (1705-2060)
15.4 (4.7)(*4)
7430 (3370)
V3800 -DT-TI
Turbocharged w/ intercooler
108 (80.6)
96 (71.6)
16 forward /16 reverse (24 forward/24 reverse w/optional creep)
16 forward /16 reverse (2/24 reverse w/optiona
Rear
-
10.00-16/18.4-34
105 (2670) /81 (2065)
90 (2295)
17.1 (435)
60.6-80.3 (1540-2040)
67.1-79.0 (1705-2005)
12.5 (3.8)
6349 (2880)
32 forward /32 reverse (48 forward/48 reverse w/optional creep)
13.
60.2
68.1
-
M96SH (2WD)Model
ROPS Models
Engine
Transmission
PTO
Type (Make: KUBOTA)
rpm
HP (kW)
HP (kW)
cu.in. (cc)
in. (mm)
in. (mm)
in. (mm)
in. (mm)
in. (mm)
in. (mm)
in. (mm)
ft. (m)
lb. (kg)
Amp
lbs. (kgf)
in. (mm)
Front /Rear
Aspiration type
Rated speed
Engine net power
PTO power
Total displacement
Fuel tank capacity
Air cleaner
Alternator
Steering
Hood type
Deck type /Pedal type
Standard tire size(*1)
Main gear shift
Hydraulic-shuttle
Range shift
Main clutch type/Brake type
Mechanical differential lock
PTO type
Speed
Hydraulics
Other features
Dimensions & weight(*2)
Pump capacity (3-point hitch)
3-point hitch
No. of standard remote valves
4WD drive system
Overall height /ROPS folded
Overall height (top of CAB)
Overall width(*3)
Wheelbase
Ground clearance (Drawbar bracket)
Overall length
Rear
Turning radius (w/o brake)
Tractor weight
Front
Category
Control system
Lift capacity at 24 in. behind lift point
No. of speeds (Option)
M108SDSF(2WD) M108SHD (4WM108SH (2WD)M96SDS (4WD)
- Standard - Standard -Dual speed (Hi-Lo)
Tread width
SPECIFICATIONS
The company reserves the right to change the above specifications without notice. This brochure is for descriptive purposes only. Please contact your local Kubota dealer for warranty and safety information.For your safety, KUBOTA strongly recommends the use of a Rollover Protective Structure (ROPS) and seat belt in almost all applications. For complete operational information, the operator's manual shouldbe consulted. Not for sale in Nebraska. (* 1) Optional tire size and disk variation are available. Radial tires are also available. (* 2) All dimensions measured with standard tire. (* 3) At 72-inch rear tire tread. (* 4) 4WD engaged. * 540/1000 PTO factory option model is available.
ダミー 06.9.20 4:47 PM ページ 15
-cylinder diesel
ft)
scs
wet discs
abilizers
ontrol
(optional)
optional)
k assist
ng pedals
V3800 -DT-TI
ocharged w/ intercooler
108 (80.6)
96 (71.6)
16 forward /16 reverse (24 forward/24 reverse w/optional creep)
05 (2670) /81 (2065)
17.1 (435)
(48 forwardnal creep)
32 forward /32 reverse (48 forward/48 reverse w/optional creep)
Front & Rear
Bevel gear type
13.6-24/18.4-34 Cast
91 (2315)
60.2-65.4 (1530-1660)
68.1-80.1 (1730-2035)
15.4 (4.7)(*4)
7981 (3620)
2WD) M108SHD (4WD) *M108SDS (4WD)
d - Standard
V3800-DI-T
Turbocharged
2600
95 (70.9)
84 (62.7)
230 (3769)
46 (175)
Dry, dual-element
60
32 forward /32 reverse (48 forward/48 reverse w/optional creep)
32 forward /32 reverse (48 forward/48 reverse w/optional creep)
8/Fully synchronized (with swing shift)
2- speeds
Steering column-mounted lever
Hydraulic wet discs /Hydraulic wet discs
Front & Rear
Hydraulic independent PTO with PTO brake, wet discs
540 rpm (540/1000 rpm optional)
17.2 (65)
Telescopic lower link ends, Telescopic stabilizers
II
Position, draft (top link sensing) & mix control
4630 (2100), 7490 (3400) w/dual assist cylinders (optional)
1 standard (2nd, 3rd & flow control valve optional)
Bevel gear type
Hydrostatic power steering
Single piece full open hood, twin gas shock assist
ISO-mounted full flat deck with rubber mat /hanging pedals
12.4-24/18.4-30 Cast
160 (4120)
104 (2630)
90 (2295)91 (2315)
95.9 (2435)
15.2 (385)
59.8-63.8 (1520-1620)
67.1-81.1 (1705-2060)
15.4 (4.7)(*4)
8025 (3640)
Center direct injection (E-CDIS), liquid cooled 4-cylinder diesel
10.00-16/18.4-34
V3800-DT-TI
Turbocharged w/ intercooler
108 (80.6)
96 (71.6)
16 forward /16 reverse(24 forward/24 reverse w/optional creep)
106 (2680)
91 (2315)
17.1 (435)
Rear Front & Rear
- Bevel gear type
13.6-24/18.4-34 Cast
-
60.6-80.3 (1540-2040) 60.2-65.4 (1530-1660)
67.1-79.0 (1705-2005) 68.1-80.1 (1730-2035)
12.5 (3.8) 15.4 (4.7)(*4)
6945 (3150) 8576 (3890)
CAB Models
M96SDSC (4WD) M108SHC (2WD) *M108SHDC (4WD) *M108SDSC (4WD)
Standard - Standard
ダミー 06.9.20 4:47 PM ページ 16
Cat.No.0000-00-COM Printed in Japan.D.REX.'00-000.
R
©2006 Kubota Corporation
KUBOTA TRACTOR CORPORATIONKubota Tractor Corporation, 3401 Del Amo Boulevard, Torrance CA 90503Western Division: 1175 S. Guild Ave., Lodi, CA 95240 Tel (209) 334-9910Central Division: 14855 FAA Boulevard, Fort Worth, TX 76155 Tel (817) 571-0900Northern Division: 6300 at One Kubota Way, Groveport, OH 43125 Tel (614) 835-1100Southeast Division: 1025 Northbrook Parkway, Suwanee, GA 30024 Tel (770) 995-8855
Visit our web site at: www.kubota.com
With a shorter overall height and lower operatorprofile, the M108S Low Profile model is perfectfor work in orchards or almost any location withheight restrictions.
Our Low Profile modeloffers maneuverability,agility and ease of usefor all low-clearanceapplications.
Kubota also offers a full line-up of M-Series tractors.These tractors are the pinnacle of size, power, and performance.
M108X/M125XM5040/M6040/M7040/M8540/M9540
ダミー 06.9.20 3:53 PM ページ 1