kurz quick start
TRANSCRIPT
-
8/2/2019 Kurz Quick Start
1/14
Cunkalicious Lovers Guide To The Kurzweil PC3
Brian Cowell
-
8/2/2019 Kurz Quick Start
2/14
Cunkalicious Lovers Guide To The Kurzweil PC3
P R O G R A M M O D E
Enter PROGRAM Mode
The Kurzweil PC3 on power up will always boot into PROGRAM mode
and will display a red light on the Program button.
If you find yourself trapped deep in the PC3s menus and would like to
immediately return to PROGRAM mode, you can by continually pressingthe Exit button.
The PROGRAM mode display
-
8/2/2019 Kurz Quick Start
3/14
Cunkalicious Lovers Guide To The Kurzweil PC3
What controls PROGRAM mode
-
8/2/2019 Kurz Quick Start
4/14
Cunkalicious Lovers Guide To The Kurzweil PC3
Searching for a PROGRAM
-
8/2/2019 Kurz Quick Start
5/14
Cunkalicious Lovers Guide To The Kurzweil PC3
Using General MIDI sounds
The PC3 comes with a bank of specially programmed General MIDI(GM1) compatible PROGRAMs. In order to use these sounds, the PC3
must firstly be put into its GM compatibility mode.
When General MIDI is in use, both SETUP and QACCESS modes are disabled.@
-
8/2/2019 Kurz Quick Start
6/14
Cunkalicious Lovers Guide To The Kurzweil PC3
Demos for every PROGRAM
Each PROGRAM comes pre-programmed with a small demonstration riff foryou to audition the sound with while in PROGRAM mode. To play the riff
once, you simply press the Play / Pause button on the front panel.
If a demonstration riff does not play, it meansthat this function has simply been turned off.
To turn it back on again is very simple.
Press the MASTER mode button.
Press the Page 2 button.
Turn Demo Button to On
-
8/2/2019 Kurz Quick Start
7/14
Cunkalicious Lovers Guide To The Kurzweil PC3
Quickly change the Arpeggiator
The same button you use to turn on/off the arpeggiator, you can use tochange the arpeggiator settings in PROGRAM mode. By pressing the
ARP & SW buttons simultaneously, you can quickly change your ar-peggio and the way it behaves.
Press Exit when you have finished, and the new settings are saved.
Select a sound
-
8/2/2019 Kurz Quick Start
8/14
Cunkalicious Lovers Guide To The Kurzweil PC3
Set the Tap Tempo
To get to the Tap Tempo editor in PROGRAM mode (andSETUP mode), you press the left & right navigation buttons
simultaneously.
You will notice that while you are in the TapTempo editor, that the bottom 4 CATEGORY
buttons blink in time.
-
8/2/2019 Kurz Quick Start
9/14
Cunkalicious Lovers Guide To The Kurzweil PC3
Informat ion on a PROGRAM
-
8/2/2019 Kurz Quick Start
10/14
Cunkalicious Lovers Guide To The Kurzweil PC3
KB3 (Kurzweils Organ Modelling)
KB3 buttons
-
8/2/2019 Kurz Quick Start
11/14
Cunkalicious Lovers Guide To The Kurzweil PC3
S E T U P M O D E
Enter SETUP Mode
The SETUP mode display
-
8/2/2019 Kurz Quick Start
12/14
Cunkalicious Lovers Guide To The Kurzweil PC3
Handy zone indicators
-
8/2/2019 Kurz Quick Start
13/14
Cunkalicious Lovers Guide To The Kurzweil PC3
S T A R T I N G O F F
Check Operating System
-
8/2/2019 Kurz Quick Start
14/14
Cunkalicious Lovers Guide To The Kurzweil PC3
Set the clock