KX-NS1000

SYSTEM STRUCTURE REV.0.2

KX-NS1000

IntroductionThis document explains System Outline and Specification of the KX-NS1000, and is composed of the following chapters.

Chapter 1 System Outline Chapter 2 Configuration Chapter 3 Supported Card /Terminal Chapter 4 System Capacity

For further information about feature implementation and specifications, refer to the "Installation Manual“.

Table of ContentsChapter 1 System Outline　

1-1. KX-NS1000 System Overview1-2. System Connection Diagram 1-3. Unified Messaging Overview

Chapter 2 Configuration2-1. Cabinet Configuration2-2. System configuration

Chapter 3 Supported Card /Terminal 　3-1. Terminal Compatibility

Chapter 4 System Capacity4-1. System Capacity4-2. Terminal Capacity4-3. Feature Capacity4-4. Email Client Capacity

SYSTEM OVERVIEWChapter 1

Master Unit

・・・

IP Network

Slave Unit

Up to 15 Units

1-1. KX-NS1000 System Overview 1.Stand-alone System- A single NS1000 can be used as a stand-alone system. - To use the stand-alone system, you must install a DSP card on the PBX’s mother board, then install

optional service cards into the physical slots and virtual slots.

2.Networked SystemA networked system can be realized by the following methods. - One-look - QSIG (required BRI /PRI card) - H.323 (required V-IPGW card)

* For detail, refer to the Networking Chapter.

Private IP Network Router

Remote PC

IP-PT

IP-CS PS

SIP-Phone

IP-Softphone, CA*2 Client PC

CTI ServerPC PC

SLT / FAX

External Sensor /External Relay Device

Doorphone & Door Opener

BGM/Music On Hold (MOH)

Amplifier / Pager/Speaker

- Analogue Trunk- BRI Trunk- PRI Trunk

IP/Legacy Trunks

*1 ITSP: Internet Telephony Service Provider*2 Communication Assistant*3 Built-into Main unit*4 Public Switched Telephone Network

IP/Legacy Terminals

UnifiedMessaging *3

- NS1000 is based on Linux OS.

1-2. System Connection Diagram

NS1000

PSTN*4

ITSP*1 Network

Storage memory card

Built-in Main unit

Current

DPT I/F

TDE/NCPNS1000

1-3. Unified Messaging Overview The Unified Messaging system is a new solution that adds unified messaging features such as voicemail, FAX and Email integration. The following features are available:1. Unified Messaging Feature

• Voice mail (TVM Features)• Outlook add in Desktop Messaging• Fax Server

2. Automatic 2way Recording for Manager Feature3. Presence (Absent Messaging) Feature

Unified Messaging feature is available with the Pre-installed SM card.

New

TVM

Chapter 2

CONFIGURATION

2-1. Cabinet ConfigurationComponent location• The NS1000 (2U size) can be fitted to a 19-inch rack. (Depth is same as NCP Series)• Dimensions: 430mm (Width) × 88mm (Height) × 340mm (Depth)• Weight (when fully mounted): Under 4.5kg

AC IN

AC cord clamp

AC SW GROUND Serial port FAN

System mode SW USB port IP ports

LED indicators MOH/EPG ports DPH Port (Option) Legacy Slot (Option)Front Side

Back Side

PBX Call ControlFeatures

SystemAdministration

Middleware- SIP protocol stack- Networking utilities- TCP /IP protocol stack (IPv4)

OS (ｉ TRON)

CPU: SH-4 , 400MHz

NCP/TDE

SystemAdministration + Networking

Middleware- SIP protocol stack- Enhanced Panasonic-SIP

OS (Linux)- Networking Utilities *- TCP /IP protocol stack (IPv4)

CPU: C1000 , 650MHz

PBX Call ControlFeatures

: NEW

2-2. System Configuration (1) New Innovative system architectureProvides the same level of PBX call control functionality as TDE/NCP system MPR Ver.4.

NS1000

External

Mother board

Internal

2-2. System Configuration (2) System Options

*2 The NS1000 has Storage Memory Pre-installed (SM-B), and by default allows 2 UM channels and 2 hours recording time. (Expandable to 24ch / 15hrs by Activation Key.)

*1 Each NS1000 (Master or Slave) must be fitted with a DSP card.

DSP cards*1

DSP-S

DSP-M

DSP-L

Storage Memory*2

SM-S (Max 200hrs Rec)

SM-M (Max 450hrs Rec)

SM-L (Max 1000hrs Rec)

Option cardsFAX

DPH 1

Line cardsLCOT2+SLC2

BRI4+SLC2

PRI30+SLC2

Interface Cards (Line and Doorphone) 4 types of Legacy Line cards are available for NS1000. 1 type of Doorphone interface card is also available for NS1000.

[Line Card ]

• BRI4+SLC2 Card• LCOT2+SLC2 Card• PRI30+SLC2 Card

2-2. System Configuration (3)

[DPH1 Card ]

NS1000 has 1 Free Slot for “Line card” and 1 Free Slot for “DPH1 card”.

2-2. System Configuration (4) Interface Cards – Free Slot (Description)

Part Number Image Description

KX-NS0180 SLC2 -LCOT2 Line Card

• 2 port Analogue Trunk with Caller ID (FSK/DTMF/Visual)• Reverse supported, PAY Tone not supported• 1 PFT Port• 2 SLT Ports with Caller ID (FSK)• No MSG Lamp or CPC Sending control

KX-NS0280 SLC2 - BRI4 Line Card

• 4 ISDN Basic Rate interface ports. (EURO-ISDN/ETSI Compliant) • 2 SLT Ports with Caller ID (FSK)• No MSG Lamp or CPC Sending control

KX-NS0290CE SLC2 -PRI30 Line Card

• 1 ISDN Primary Rate interface ports. (30B ch) (EURO-ISDN/ETSI Compliant) • 2 SLT Ports with Caller ID (FSK)• No MSG Lamp or CPC Sending control

KX-NS0161 -Doorphone Card

• 1 Doorphone, 1 Door Opener and 1 External Sensor port (Relay Current Limit: 24 V DC/30 V AC, 1 A max)• OFF HOOK detection supported• Doorphone connected detection supported

2-2. System Configuration (5) Optional Cards - Internal (Description)

Part Number Image Description

KX-NS0106 -FAX Card

• 1 channel Fax Server• No additional A/K is necessary for FAX

Server functionality – installing the FAX card automatically enables FAX Server Capability.

Model Type Resource Power IP AddressesKX-NS0110 DSP-S 61 1KX-NS0111 DSP-M 125 1KX-NS0112 DSP-L 252 2

At least 1 DSP Card must be fitted to each NS1000 so that the unit can operate.

Up to Two DSP Cards can be fitted to each NS1000 unit, increasing the available DSP

resource.

2-2. System Configuration (6) DSP Cards (Description)Digital Signal Processor (DSP) Cards support VoIP calls, Conferencing, UM and DISA/OGM features on the NS1000 system.

There are 3 types of DSP card, each with different levels of DSP resource. The more resource available, the more simultaneous features / calls can be maintained.

Model Type Max Recording Time (Hrs)KX-NS0135 SM-S 200KX-NS0136 SM-M 450KX-NS0137 SM-L 1000

2-2. System Configuration (7) Storage Memory Cards (SM) (Description)The NS1000 unit comes pre-installed with 2ch UM and 2hrs of Voice Mail recording capability. This can be increased to 15hrs by installing the KX-NSU001 A/K.The system VM recording capacity can be increased further by installing one of the optional SM cards.

IP-PT

Ethernet

SIP-MLT/SLT IP-CS

Other PBX IP TelephonyService

Virtual Slot

V-IPEXT32

V-SIPEXT32

V-IPGW16

V-SIPGW16 V-IPCS4

V-UTEXT32

V-IPUM12

Virtual Card type

2-2. System Configuration (8) Virtual CardsThe NS1000 uses ‘virtual’ cards to support a range of IP based Trunks, Extensions, DECT Cell Stations and UM features. Virtual cards features can be activated with the appropriate activation key. Virtual Cards are configured via the Web-Based Maintenance Console.

Virtual Card Type Description

Virtual 16-Channel VoIP GatewayCard (V-IPGW16)

Virtual Card for 16-channel H.323 trunk. Compliant with VoIP H.323 V.5 protocol, and ITU-T G.729A and G.711 codec methods. Also supports T.38 protocol.

Virtual 16-Channel SIP Trunk Card(V-SIPGW16)

Virtual Card for 16-channel SIP trunk. Compliant with RFC 3261, 3262, 3264, 3311, 3581, 3960 and 4028 protocols, and ITU-T G.729A and G.711 codec methods. Also supports T.38 protocol.

Virtual 32-Channel VoIP ExtensionCard (V-IPEXT32)

Virtual Card for 32 IP-PTs (KX-NT300 series and KX-NT265 [software version 2.00 or later only]). Compliant with Panasonic proprietary protocol, and ITU-T G.729A, G.711 and G.722 codec methods.

Virtual 32-Channel SIP ExtensionCard (V-SIPEXT32)

Virtual Card for 32 third party SIP phones. Compliant with RFC 3261, 3264, 3310, 2327 and 4028 protocols, and ITU-T G. 729A, G.711 and G.722 codec methods.

Virtual UT Extension Card(V-UTEXT32)

Virtual Card for 32 KX-UT series SIP phones. Compliant with RFC 2327, 3261, 3264, 3310, 3515, 4028 and 4235 protocols, and ITU-T G.729A, G.711 and G.722 codec methods. Also supports WSD, CWMP and HTTP.

Virtual 4 IP Cell Station Interface Card(V-IPCS4)

Virtual Card for 4 IP-CSs. Compliant with ITU-T G.729A and G.711 codec methods.

2-2. System Configuration (9) Virtual Cards (Specification)

2-2. System Configuration (10) Activation Keys (A/K)Activation Keys are required to activate the following features:• IP Trunk channel(H.323/SIP)• IP Telephone / Terminal capacity• Number of IP Telephones /Type of IP Telephones (IP softphone / IP-PTs / SIP Phones (UT series) / Other

SIP Phones / IP Conferencing Phones) • Networking Features (One-Look, QSIG)• Unified Messaging Features (REC Time, 2-Way REC, Message Backup, UM Port capacity, UM/Email

(IMAP + Voice / Fax messages)• Mobile Phone Features• CA related Feature (Thin Client, CSTA Mux, CA Pro, CA Supervisor, CA Console, CA Networking)• CTI Interface (Allows use of Third Party CTI Application)

Packages containing a combination of different A/K’s are also available to equip users with key UM and Mobility features easily.

Type FeatureIP-PT License 8 IP PT (Used for NT or UT series PT)UM License 2ch UM

CA Basic-Express 1022 Users

These A/Ks exist within the PBX hardware and cannot be deleted and will not expire.

2-2. System Configuration (11) Activation Keys (A/K) – Cont..The NS1000 is equipped with Preinstalled Permanent Activation Keys

Activation Key Type Supported Mailboxes / Extensions / Features

One-Look Network -

Two-Way REC Control -

Message Backup -

UM / Email Users 128 Mailboxes

Two-Way REC Users 30 Two-Way REC / Two-Way Transfer Users

Mobile Users 30 Cellular Phone Users

CTI Interface -

CA Pro 128 CA Pro User

CA Supervisor 1 CA Supervisor User

CA Console 1 CA Console User

CA Thin Client -

CSTA Multiplexer -

2-2. System Configuration (12) Activation Keys (A/K) – Cont..In addition to the pre-installed permanent A/Ks, there is the option to activate ‘trial’ A/Ks which are valid for 60 days. These trial A/Ks will expire 60 days after activation. Trail A/Ks cannot be re-activated by initializing the PBX system.

Trial A/Ks (60 day expiry from activation)

SUPPORTED TERMINALSChapter 3

Terminal Type Compatible with NS1000 v1.0

SIP-MLT

UT133

YES

UT136

SIP-SLT*1

UT113YES

UT123

3-1. Terminal Compatibility (1) New Range - SIP Telephone (UT Series)

*1 UT113 : No backlit / UT123 : Backlit

Terminal Type Compatible with NS1000 v1.0KX-NT3xx Series (IP-PT) YESKX-NT400 (IP-PT) NOKX-NT7xx Series (IP-Conference Phone) YESKXNCS81xx (IP-Softphone) YES3rd Party SIP Phones YESKX-DT3xx Series (New Digital PTs) NOKX-T7xxx Series (Old Digital/Analogue PTs) NODSS Consoles (KX-T7640 Series etc) NOSLTs (KX-7710 etc) YESKX-NT265 IP-PT (V2.x) YESKX-TCA155/255/256/355/356/TD7590/WT115 (Portable Stations) YESKX-T30800 Series PTs and DSS Consoles NOKX-T61600 Series PTs and DSS Consoles NOKX-T123200 Series PTs and DSS Consoles NOKX-TD7500 DECT Portable Station NOKX-NT265 IP-PT (V1.x) NOKX-NT136 IP-PT NO

3-1. Terminal Compatibility (2) Telephone Terminals

For compatible options (e.g., Add-on Key Module, USB Module, Headset), refer to the telephone’s manual.

Terminal Type Compatible with NS1000 v1.0TDA0141CE 2ch CS (DPT IF) NOTDA0142CE 4ch CS (CSIF) NOTDA0158CE 8ch CS (DPT IF) NONCP0158CE 8ch CS (IP IF) YESA228 S/M-type battery backup cable NOA229 L-type battery backup cable NOA258 Blank Slot cover NOT30865 Doorphone YEST7765 Doorphone YES

3-1. Terminal Compatibility (3) Other Terminals

SYSTEM CAPACITYChapter 4

Slot TypeMaximum Number

Stand-alone System One-look NetworkFAX Card Slot 1 16Storage Memory (SM) Slot 1 16DSP Card Slot 2 32Free Slot 1 16

Doorphone Slot 1 16

Virtual Slot 20 32Virtual Trunk Card 16 16Virtual Extension Card 20 32Virtual IP-CS Card 16 32

4-1. System Capacity (1) Type and Maximum Number of SlotsThe NS1000 supports the following type and number of slots.

Card TypeMaximum Number

Stand-alone System One-look Network

Physical Card 2 32Line Card Slot 1 16

LCOT2+SLC21 16BRI4+SLC2

PRI30+SLC2Doorphone Slot 1 16

DPH1 1 16

4-1. System Capacity (2)Maximum Optional Service Cards (1)The following number of cards can be installed in the Physical Slots of the PBX.

Note• Any card that exceeds the capacity of the PBX will be ignored.• When the PBX starts up with an invalid configuration, some cards will be ignored.

Storage Memory Card Slot 1 16SM-S

1 16SM-MSM-L

Card TypeMaximum Number

Stand-alone System One-look Network

DSP Card Slot 2 32DSP-S

1 16DSP-MDSP-L

FAX Slot 1 16FAX 1 16

Note• Any card that exceeds the capacity of the PBX will be ignored.• When the PBX starts up with an invalid configuration, some cards will be ignored.

4-1. System Capacity (3) Maximum Optional Service Cards (2)The following number of cards can be installed in the Physical Slots of the PBX.

Card TypeMaximum Number

Stand-alone System One-look NetworkVirtual Trunk Card 16 16

V-IPGW16 3 6V-SIPGW16 16 16

Virtual Extension Card 20 32V-IPEXT32 4

32V-SIPEXT32

20V-UTEXT32V-IPCS4 16

Virtual Unified Messaging Card 2 32V-IPUM12 2 32

4-1. System Capacity (4) Maximum Optional Service Cards (3)The following number of cards can be installed in the Virtual Slots of the PBX.

4-1. System Capacity (5)

*1 The maximum number of extension ports is 640 per PBX, and the maximum number of Unified Messaging ports is 24 per PBX. When 24 ports for Unified Messaging are fully activated on the Master unit, the maximum number of extension ports will be less than 640.One Unified Messaging port is equal to 10 extension ports. Therefore, when all Unified Messaging ports are activated, only up to 420 extensions are available. (The 2 Built-in UM ports are not counted in this calculation).This condition does not apply for Slave units or Stand-Alone units.

Type Stand-alone System One-look Network

Total Number of Trunks 256 600

Trunk (Virtual Trunk Card) 256 256

H.323 Trunks 48 96

SIP Trunks 256 256

Trunk (Physical Trunk Card) 30 480

Total Number of Extensions 640 1000*1

Extension (Virtual Extension Card) 640 1000

IP-PT and IP Softphone 128 1000

SIP Extension 640 1000

Extension (Physical Extension Card) 2 32

Maximum Trunks and ExtensionsThe PBX supports the following number of trunks and extensions.

*1 KX-NT300 series, and KX-NT265(v2.0).

Terminal Type Stand-alone System One-look Network

Telephone 640 1000

SLT 2 32

IP-PT*1 128 1000

SIP Phone 640 1000

WirelessIP-CS (8-channel) 64 128

PS 512 512

Unified Messaging (Channels) 24 384 (24x16)

Doorphone 1 16

Door Opener 1 16

External Sensor 1 16

4-2. Terminal Capacity Maximum Terminal EquipmentThe following shows the number of each terminal equipment type supported by the PBX.

Type Stand-alone System One-Look Network

UM Mailbox 1024 16384

2-Way Recording (Users) 640 1000

Mobile Users 1152 1152

4-3. Feature Capacity Maximum Feature capacityThe following shows the maximum number of each feature supported by the PBX.

CA Client Login Mode Server-less Server

Basic - Express 240 1022

Pro 240 1022

Operator Console 128 128

Supervisor 4 128

NB: Total number of Login in Server Mode is 1022

4-4. Email Client Capacity Outlook Integration with built-in Unified MessagingThe maximum number of IMAP clients using Outlook is 24 users per unit. (Reason: Outlook keeps the IMAP session open, even though then user is idle.)

Type of mailer Outlook (+Tool Bar)*1 Other*2

# of UM Email Client 24 640

Integration with POPNo limitation for users who receive voice data with an email attachment.

*1) This limitation is not applied if the user can use Outlook in “Offline” mode.*2) Email which releases IMAP session when idle, such as Thunderbird, Lotus Notes etc.

THE END