lab exercise #3 introduction to the digital globe geo210...
TRANSCRIPT
![Page 1: Lab Exercise #3 Introduction to the Digital Globe Geo210 ...patientspeak.com/webct/melissa/Assignment 3.pdf · Purpose: This lab will introduce the concept of the Digital Earth. The](https://reader034.vdocument.in/reader034/viewer/2022042122/5e9d8bedc1568527192162c8/html5/thumbnails/1.jpg)
Lab Exercise #3
Introduction to the Digital Globe – Google Earth Geo210 – Rockland Community College
Professor Paluzzi Due Date: _________
The Digital Globe: Google Earth – 30 Points
Purpose: This lab will introduce the concept of the Digital Earth. The intended goal of
all of the module‟s learning activities is to demonstrate to students how useful it would
be to spatially represent data and imagery on virtual globes and computerized maps (computer/digital cartography). In addition, the student will learn fundamental concepts
of geospatial analysis. Equipment & Materials: Google Earth, Web browser with high-speed Internet
Access. Installation instructions are included at the end of this document.
Instructions: Read the explanatory materials and complete the
questions that follow.
What do you need to turn in?
There are a series of imbedded questions (clearly labeled) within this document.
In order to gain credit for this exercise, you need to turn in the answers to these
questions and the appropriate screen shots (ALT+PRNT SCRN key will copy the
screen to the clipboard. Edit->Paste or Ctrl+V will paste the screenshot into your
Word document. The document should be submitted in Word format, Text format,
RTF format, or a .pdf file.
Getting to Know Google Earth
Google Earth is a friendly 3D, Internet-based Geographic Information System (GIS) application. This application was originally developed by the Keyhole Inc. located in
Silicon Valley. In 2004, Keyhole Inc. was acquired by Google. Google re-packaged
Keyhole‟s 3D Virtual globe software and released a new version called “Google Earth” in June, 2005. The concept of the Digital Earth was unveiled to the general public by
Google Earth; many researchers or governments agencies started to utilize Google Earth for their work. The software enables you to virtually fly over any place in the world from
your computer.
By the publication of this document, Google Earth 5.2 has been released, which allows users to freely incorporate uploaded GPS points of data onto baseline maps. The
program, therefore, is becoming much more than bells-and-whistles. As Google Earth becomes more and more robust, it is trending from a 'fun', casual tool to one that is
being used in classrooms and in research labs alike. The following set of instructions will provide users with some of the varied uses of Google Earth.
Open Google Earth via the short cut icon on your Desktop or via the 'Start' button:
Click on the Google Earth icon on your desktop, or
Use the “Start” button (Start > All Programs > Google Earth > Google Earth).
![Page 2: Lab Exercise #3 Introduction to the Digital Globe Geo210 ...patientspeak.com/webct/melissa/Assignment 3.pdf · Purpose: This lab will introduce the concept of the Digital Earth. The](https://reader034.vdocument.in/reader034/viewer/2022042122/5e9d8bedc1568527192162c8/html5/thumbnails/2.jpg)
Now, let's learn about Google Earth‟s basic features and controls.
Figure 1-1: Google Earth Primary Map Controls and Functions
There are three operational panels (see 1, 2, and 3 in Figure 1-1), Navigation Control (4), and a map view (5). The three panels are the Search Panel (1), the Place Panel (2),
and the Layer Panel (3). Go to the "View" pull-down menu and toggle on the "Overview Map" by clicking on the
option from the pull-down list. You should now see a world map pop-up on the bottom right corner of the screen. You can remove this world map by de-selecting "Overview
Map" from the View pull-down menu. The Navigation Controls (4) include the following:
The “Look Joystick” control : Use the Look joystick to look around as if you
were turning your head. Click an arrow to look in that direction or continue to press down on the mouse button to change your view. After clicking an arrow, move the
mouse around on the joystick to change the direction of motion. Click and drag the
globe and move around. Notice the way the Look Joystick moves.
The “Move Joystick” control : Use the Move joystick to move your position from one place to another. Click an arrow to look in that direction or continue to press
down on the mouse button to change your view. After clicking an arrow, move the mouse around on the joystick to change the direction of motion.
![Page 3: Lab Exercise #3 Introduction to the Digital Globe Geo210 ...patientspeak.com/webct/melissa/Assignment 3.pdf · Purpose: This lab will introduce the concept of the Digital Earth. The](https://reader034.vdocument.in/reader034/viewer/2022042122/5e9d8bedc1568527192162c8/html5/thumbnails/3.jpg)
The Zoom Slider : To get closer to the ground to see more detail but in a smaller geographic area. Try to clicking and dragging the slider toward the plus/minus sign; try
double-clicking on any part of the image.
The Hider/Show Sidebar : To conceal or the display the side bar (Search, Places
and Layers panels).
The “Add Placemark” control : To add a placemark for a location.
The “Measure” control : To measure a distance or area size.
The “Add Overlay” controls : To create and add your own
overlay features onto Google Earth. You can draw a polygon, a path or line, add a graphic image, or record a tour to the map which Google Earth will “drape” over the
terrain. 5
: Enables you to view historical imagery. Drag the time slider to change the imagery to
other acquisition dates. : Allows you to set sunlight across the landscape. Just slide the time slider to the time of
day you wish to display the desired amount of daylight upon your landscape.
Email : To send the current view to a user with Google Earth or send an image of the
current view to an email recipient.
Print : To print the current view of Earth.
: To show the current view in Google Maps in your web browser.
![Page 4: Lab Exercise #3 Introduction to the Digital Globe Geo210 ...patientspeak.com/webct/melissa/Assignment 3.pdf · Purpose: This lab will introduce the concept of the Digital Earth. The](https://reader034.vdocument.in/reader034/viewer/2022042122/5e9d8bedc1568527192162c8/html5/thumbnails/4.jpg)
: A switch press between sky and earth. Click it to view stars, constellations, galaxies, planets and the Earth's moon. This is a great feature, especially for
astronomical applications (you can even set up a Google planetarium).
Search Panel (1): Type “San Diego” in the “Fly To” address field and then press the enter key. This will fly you to the center of downtown San Diego, CA.
Layers Panel (3): Next, we are going to introduce an important concept in GIS called, “Map layers.” Map layers are layers of map features, data, or imagery that can be
overlaid or stacked together like layers on a cake or toppings on a burger. LIST OF LAYERS
Figure 1-2: List of Layers
From the "Layers" window, turn on the “Primary database” and expand the list. Select
the following data layers to display: “Places,” “Roads,” and “3D Buildings” features by
clicking on the box next to the name (Figure 1-2). Now, even though you have turned on some layers, their associated features may not be visible. You must sufficiently zoom
in to the area to see the features. This is called "scale-dependent features". It should not make sense to show all the buildings on the map when you are zoomed out all the way.
Google Earth and other virtual Earth-type applications make features like roads and buildings visible only when they would be visible in real life.
Play around, see what you see. Fly to an area of your choice and paste a screenshot
above question #1. Explain briefly what we are seeing.
Next, answer the following question: Question-1: Fly to Balboa Park in San Diego, CA (type in "Balboa Park" in the "Fly to"
window). There are a variety of highlighted points on the map (colored squares and blocks that green, blue and yellow), click on some of these points and answer the
following question: What type of information does each thematic point provide and who
provides this information (Note: You can expand the “Primary Database” layer by
![Page 5: Lab Exercise #3 Introduction to the Digital Globe Geo210 ...patientspeak.com/webct/melissa/Assignment 3.pdf · Purpose: This lab will introduce the concept of the Digital Earth. The](https://reader034.vdocument.in/reader034/viewer/2022042122/5e9d8bedc1568527192162c8/html5/thumbnails/5.jpg)
clicking on the "+" sign next to "Geographic Web" You can now expand "Places" and
"Preview"....this immediately shows some of the power of Google Earth. Data is being input into the system from a vast array of sources.)?
Try experimenting with some of the other layers. If you click on "Traffic", real-time traffic data will appear on your map (if you are zoomed in sufficiently close). If you click
on one of the real-time traffic dots, you will get average speed data of that strip of highway or road.
Include a screenshot of Balboa Park.
Exploring the World: Examples of 3D Viewing
a) The Grand Canyon: Fly to the Grand Canyon by Entering “Grand Canyon” in the “Fly To” Address Field.
Zoom in and change the look angle from vertical to closer to ground level. This will show 3D terrain. Press enter. (See Figure 1-3)
Click on the “Look Joystick” and/or use the "Zoom slider" controls until you see the terrain from slightly above ground level (Figure 1-4).
Explore the local area with your Navigation controls. You can move around (pan) and zooming in and out.
Now, click on the "Tools" pull-down menu. Select "Enter Flight Simulator". Select
your aircraft (I recommend the SR22, as it is easier to fly than the F16). If you click "Help" to get a list of controls, you will have to enter the flight simulator
again via the "Tools" menu. Here are some quick directions: the "Page Up" button
will thrust you forward, and the arrow keys will move you around. Now, click "Start Flight" (note: while you are flying, you can then click the "Help" pull-down
menu for the flight instructions). Enjoy the flight over the Grand Canyon!
Use your mouse cursor (see arrow in Figure 1-4B) to control your flight.
![Page 6: Lab Exercise #3 Introduction to the Digital Globe Geo210 ...patientspeak.com/webct/melissa/Assignment 3.pdf · Purpose: This lab will introduce the concept of the Digital Earth. The](https://reader034.vdocument.in/reader034/viewer/2022042122/5e9d8bedc1568527192162c8/html5/thumbnails/6.jpg)
Figure 1.4B
b) Downtown San Diego: Now that you have crashed a few times, you can exit the flight simulator....Fly
back to downtown San Diego, CA by typing in "San Diego, CA" in the "Fly to" window. In the Layers window, make sure that "Roads", "3D buildings", and
"Borders and Labels" are clicked on. Now zoom in, zoom out, and tilt to explore downtown San Diego (Figure 1-5).
Next, answer the following question:
Question 2: After touring the Grand Canyon and downtown San Diego, write down your opinions regarding the usefulness of different functions like “Roads” and “3D Buildings”.
Clearly, there are applications in tourism that one can think of right away. What applications can you envision with regards to scientific studies, for example?
![Page 7: Lab Exercise #3 Introduction to the Digital Globe Geo210 ...patientspeak.com/webct/melissa/Assignment 3.pdf · Purpose: This lab will introduce the concept of the Digital Earth. The](https://reader034.vdocument.in/reader034/viewer/2022042122/5e9d8bedc1568527192162c8/html5/thumbnails/7.jpg)
Now that you are familiar with several of the Google Earth navigation tools like “Zoom
In,” “Zoom Out,” “Tilt,” etc.. Use these tools to explore the entire globe. Explore your home town. You can even type in your address in the "Fly to" window to see your home
from above (not to mention at street level).
Question 3: Describe what you see regarding your home. Typically we see our home through a very oblique (eye-view) perspective. How does the impression of what you
see change when viewing it from above? Like before, include a screenshot of your home.
Latitude & Longitude
A Quick Review of Latitude and Longitude
To locate any unique point on Earth, a coordinate system must be used. Google Earth and many other applications use the geographic grid system of latitude and longitude.
Latitude: Latitude describes an imaginary survey line which runs east to west. You can
think of these parallels of latitude as forming the rungs on an imaginary ladder. Latitude is expressed as an angle from 0 to 90 degrees either north or south of the Equator (See
Figure 1-6). Figure 1-6: Latitude
As we discussed earlier, latitude is the angular measure north or south of the equator. In the “Decimal Degrees” system, it is important to note that when you are going north
of the Equator the values range from 0 to 90 degrees in the “positive” direction. Think of this as going “up” on the imaginary ladder starting from the Equator. If you go south of
the Equator the values range from 0 to -90 degrees. Think of this as going “down” the imaginary ladder from the Equator. As an example, Sydney, Australia lies at
approximately -33.87 degrees Latitude (note the negative sign). Anchorage, Alaska lies at approximately 61.22 degrees Latitude (note the positive value). "-" is the same as
"south" and "+" is the same as "north".
Longitude: Longitude is the angular measure from the Prime Meridian. Longitude
describes an imaginary survey line running south to north. There are 360 degrees of longitude and they all converge at the North and South Poles. Longitude is expressed as
an angle from 0 to 180 degrees either west or east of the Prime Meridian (See Figure 1-7). The Prime Meridian is the imaginary line that extends from the South Pole to the
![Page 8: Lab Exercise #3 Introduction to the Digital Globe Geo210 ...patientspeak.com/webct/melissa/Assignment 3.pdf · Purpose: This lab will introduce the concept of the Digital Earth. The](https://reader034.vdocument.in/reader034/viewer/2022042122/5e9d8bedc1568527192162c8/html5/thumbnails/8.jpg)
North Pole and passes through Greenwich, London, England. It is described as 0 degrees
longitude.
In the “Decimal Degrees” system, it is important to note that when you are going west of the Prime Meridian, the values range from 0 to -180 degrees; you are going in the
“negative” direction. When you go east of the Prime Meridian the values range from 0 to 180 degrees; you are going in the "positive" direction. At 180 degrees longitude, you
reach the International Date Line. Here, there is no positive or negative. This imaginary line runs from the South Pole to the North Pole in the middle of the Pacific Ocean and is
on the opposite side of the Earth from the Prime Meridian.
As an example, Sydney, Australia, which is in the Eastern Hemisphere, lies at approximately 151.21 degrees longitude (note that it is a positive value). Anchorage,
Alaska, which is in the Western Hemisphere, lies at approximately -149.89 degrees longitude (note the negative sign). "-" is the same as "west" and "+" is the same as
"east". 0 degrees longitude (the Prime Meridian) is neither + nor -. The International
Date Line (180 degrees longitude) is neither + nor -.
Decimal Degrees: Latitude and longitude are most commonly expressed in “Degrees, Minutes, and Seconds” or “Decimal Degrees.” Both are equivalent. However, for the
sake of simplicity, we are going to use “Decimal Degrees.” In order to view the map coordinates in decimal degrees, you will have to make a
change in Google Earth. First, select the “Tools” pull-down menu and click on “Options…”
The Google Earth Options menu will appear (Figure 1-8). In the Google Earth Options menu, be sure the “3D View” tab is selected and change the “Show Lat/Long” option to
“Decimal Degrees” (Figure 1-8). In this case, the latitude (y-coordinate) and longitude (x-coordinate) will be represented in decimal degrees. This is how most GIS and related
software applications represent latitude and longitude. Save the settings by clicking on the “OK” button.
Figure 1-8: Google Earth Options Menu with Degrees
Selected for Latitude and
Longitude in the 3D View Tab
![Page 9: Lab Exercise #3 Introduction to the Digital Globe Geo210 ...patientspeak.com/webct/melissa/Assignment 3.pdf · Purpose: This lab will introduce the concept of the Digital Earth. The](https://reader034.vdocument.in/reader034/viewer/2022042122/5e9d8bedc1568527192162c8/html5/thumbnails/9.jpg)
Figure 1.8A shows Degree Minute Seconds representation of Lat/Long. After changing
the settings, as above, the same location is depicted in Decimal Degrees (Figure 1.8B below).
Figure 1.8A
Figure 1.8B
Your Home Address
Now let's determine the Decimal Degrees of your home.
a) In the "Layers" window, be sure the “borders” and “roads” features are on.
b) Enter the full address of your home in the "Search" window (for example, the
address of Rockland Community College is: 145 College Road, Suffern, NY)
c) Determinie the latitude and longitude of your home by moving your cursor over the center of your home in the Map View window. Coordinates will appear in the
bottom of the screen (Figure 1-9 below).
Figure 1-9:
Latitude & Longitude
Coordinates of Rockland
Community
College, 145 College Road,
Suffern, NY) After you determine the coordinates of your home, create a Placemark for it:
a) With the use of the Navigation Tools, position your home near the center of the screen.
![Page 10: Lab Exercise #3 Introduction to the Digital Globe Geo210 ...patientspeak.com/webct/melissa/Assignment 3.pdf · Purpose: This lab will introduce the concept of the Digital Earth. The](https://reader034.vdocument.in/reader034/viewer/2022042122/5e9d8bedc1568527192162c8/html5/thumbnails/10.jpg)
b) Click the “Add Placemark” button: It is located near the top of your Google
Earth window.
A New Placemark control panel will pop-up and a Placemark will appear near the center of the screen (indicated by the black arrow in Figure 1-10 below).
c) Grab the Placemark by clicking on the Placemark. Now, drag it to the center of
your home.
d) In the "Name Field" (see Figure 1-10) type in a name for your home.
Before you press the OK button, click on the “View” tab in the New Placemark control
panel. Record the following information:
Question 4: What is the "name" of your home (that is, what did you title the Placemark)?
Question 5: What is the Latitude of your home? (decimal degree & Degree Minute Seconds)
Question 6: What is the Longitude of your home? (decimal degree & Degree Minute Seconds)
e) Click on the OK button to save the new Placemark of your home on the map.
When you Zoom Out, the new Placemark for your home will remain visible.
Now, let's determine the distance between your home and Rockland Community College. In the “Search” address window enter the address of Rockland Community
College: 145 College Road, Suffern, NY.
![Page 11: Lab Exercise #3 Introduction to the Digital Globe Geo210 ...patientspeak.com/webct/melissa/Assignment 3.pdf · Purpose: This lab will introduce the concept of the Digital Earth. The](https://reader034.vdocument.in/reader034/viewer/2022042122/5e9d8bedc1568527192162c8/html5/thumbnails/11.jpg)
Create a new Placemark for Rockland Community College (Note: the pointer might
be slightly off. Please put a Placemark on one of the buildings on the campus -- see Figure 1-10 above).
Zoom out enough so both Placemarkers are visible (your home and RCC). You should be able to do this even if your location is in another state or country.
Open the Measure Tool control, which is located in the Tools pull-down menu, or,
click on the Measure icon: (note: it might also be called Ruler depending on which
version of Google Earth you are using). Use Miles as your measuring unit. Click on your home, then drag the line to the SWC Placemark. Double-click on RCC. (Figure
1-11)
Question 7: What is the distance between your home and RCC (miles):
Now, close the Measure Tool by clicking on the X on the top right-hand corner of the
Measure Tool menu. Now let's create street map directions between your home and SWC.
Go to your home Placemark. Right-click on top of it (MAC users, hold down the Control button and mouse Click). A pop-up menu will appear. Select the
“Directions from here” option.
Next, go to the RCC Placemark. Right-click on top of it. Select the “Direction to
here” option.
Google Earth will automatically create direction between your home and RCC (see Figure 1-12).
Play Tour
If you click the "Play Tour" button, you will have a virtual street by street drive-through
all the way to RCC...
Please answer the following question:
![Page 12: Lab Exercise #3 Introduction to the Digital Globe Geo210 ...patientspeak.com/webct/melissa/Assignment 3.pdf · Purpose: This lab will introduce the concept of the Digital Earth. The](https://reader034.vdocument.in/reader034/viewer/2022042122/5e9d8bedc1568527192162c8/html5/thumbnails/12.jpg)
Question 8: What is the first step of driving instructions that Google Earth lists FROM
your home (just copy down the first one)?
Figure 1-12: Generating Turn-by-Turn Navigation Instructions
Some Additional Fun Exercises:
a) “Area 51” is a Top Secret U.S. Military site (in Nevada) that many in the government claim does NOT exist! The coordinates are 37.249361,-115.812339.
Copy the coordinates into the “Fly To” address field and click enter.
Question 9: What does Area 51 look like to you (i.e. a shopping mall? a lake? an
airport? etc.)? Describe in detail what you are seeing.
b) Next, in the "Places" window, double-click your home Placemark (you will automatically be taken back to your home). Now, let's figure out the name of the
nearest pizzeria. Hint: Make sure your home is near the center of the screen then Select the “Find Businesses” tab located next to the “Fly To” tab (Figure 1-13).
Enter "Pizza" in the “What” field then press enter. Use the Measure tool to determine how far away the nearest pizzeria is from your home.
Question 10: What is the name of the nearest pizzeria? How far is the pizzeria from
your home (in feet)? Include a screenshot.
![Page 13: Lab Exercise #3 Introduction to the Digital Globe Geo210 ...patientspeak.com/webct/melissa/Assignment 3.pdf · Purpose: This lab will introduce the concept of the Digital Earth. The](https://reader034.vdocument.in/reader034/viewer/2022042122/5e9d8bedc1568527192162c8/html5/thumbnails/13.jpg)
Figure 1-13: A Local Search of Pizza Restaurants
c) Alcatraz Island, near San Francisco, California, used to be an “inescapable” high-
security prison where the worst and most notorious criminals were kept. The island, known as “The Rock” is surrounded by dangerous currents and freezing-
cold water. It was supposed to be nearly impossible to escape!
Using Google Earth, answer the following questions:
Question 11: In what general direction (north, south, east, or west) is the city of San Francisco located relative to Alcatraz Island and how far apart are they from one another
(Hint: use the Fly To field and type "Alcatraz". Next, use the Measure tool)?
Question 12: What is the least distance that someone needs to swim in the ice-cold water to escape the prison island?
Question 13: In what direction is the Golden Gate Bridge relative to Alcatraz Island (Hint: if you are uncertain where the Golden Gate Bridge is, then type in "Golden Gate
Bridge" in the Fly To window. Also, be sure the "3D Buildings" is on in the Layers window)?
Above your answer to question 14 – post a screen shot of Crater Lake, OR.
Question 14: Now that you are familiar with some of the functionality of Google Earth you
are to navigate to 5 different locations in Rockland or Orange County. Interpret the image from a geographic perspective. For each of the five
locations provide the place you are identifying and describe what you see. You need to include a screen of the location, and you must interpret both the
cultural and physical landscape of each location.
![Page 14: Lab Exercise #3 Introduction to the Digital Globe Geo210 ...patientspeak.com/webct/melissa/Assignment 3.pdf · Purpose: This lab will introduce the concept of the Digital Earth. The](https://reader034.vdocument.in/reader034/viewer/2022042122/5e9d8bedc1568527192162c8/html5/thumbnails/14.jpg)
Place 1:________________
Place 2:________________
Place 3:________________
Place 4:________________
Place 5:________________