land use permit lup‐ sign installation for the prohibition ...€¦ · lup‐psmd sign...
TRANSCRIPT
February 23, 2018
Land Use Permit
LUP‐PSMD Sign Installation for the Prohibition of Specific Mobility Devices
§ 46.2‐904 of the Code of Virginia authorizes the governing body of any county, city, or town to install
signs prohibit the use of roller skates, skateboards, and electric personal delivery devices and/or the
riding of bicycles, electric personal assistive mobility devices, motorized skateboards or foot‐scooters,
motor‐driven cycles, or electric power‐assisted bicycles on designated sidewalks or crosswalks. A land
use permit is required in order to post such signs within VDOT maintained right‐of‐way.
Permittee Agreement for Land Use Permit Issuance
I, an official of the undersigned locality, hereby acknowledge that I am fully cognizant of all of the
following requirements associated with the issuance of a Virginia Department of Transportation
(VDOT) land use permit authorizing the locality to install within state maintained rights‐of‐way
signage prohibiting the use of specific mobility devices:
Type or Print Clearly
Locality Name: ________________________________________________________________________
Locality Federal Tax ID No.: _____________________________________________________________
Locality Address: ______________________________________________________________________
City: _______________________________________ State: _______ Zip Code: _________________
Locality Representative’s Name: _________________________________________________________
Locality Representative’s Signature: ______________________________________________________
Locality Representative’s Title: __________________________________________________________
Telephone Number: ( _____ ) ______ ‐ _________ E‐mail Address: _________________________
2
Virginia Department of Transportation (VDOT) Land Use Permit Required by Law
The General Rules and Regulations of the Commonwealth Transportation Board provide that no work of
any nature shall be performed on any real property under the ownership, control, or jurisdiction of
VDOT until written permission has been obtained from VDOT. Written permission is granted for the
placement on state maintained highway right‐of‐way of signs prohibiting the use of specific mobility
devices through the issuance of a land use permit.
By issuing a permit, VDOT is giving permission only for whatever rights it has in the right‐of‐way; the
permittee is responsible for obtaining permission from others who may also have an interest in the
property.
The permittee will be civilly liable to the Commonwealth for expenses and damages incurred by VDOT as
a result of violation of any of the rules and regulations of this chapter. Violators shall be guilty of a
misdemeanor and, upon conviction, shall be punished as provided for in §33.2‐210 of the Code of
Virginia.
Application Requirements
Application for a land use permit authorizing the placement of signs by localities prohibiting the use of
specific mobility devices on state maintained highways shall be made through the local residency permit
office where the activity is to take place.
The permit applicant shall stake‐out the requested sign location for field review by the local residency
permit office.
The local residency permit office receiving the request shall coordinate review and approval of the
request with all appropriate VDOT personnel.
In addition to an executed copy of this document, the permit application shall include documentation
indicating that the governing body of the locality has passed an ordinance prohibiting the use of specific
mobility devices at the requested location or locations.
Application forms and general information regarding VDOT land use permitting for the placement of
signs on state maintained highway right‐of‐way can be obtained by contacting the local residency permit
office or at the following VDOT web site: http://www.virginiadot.org/business/bu‐landUsePermits.asp
Contact Information
A list of counties with their corresponding VDOT district offices and contact information may be
obtained at the following VDOT web site: http://www.virginiadot.org/about/districts.asp
3
Permit Fees and Surety Requirement
The land use permit fee and surety for the placement of signs by localities prohibiting the use specific
mobility devices is waived.
General Requirements
1) The locality is responsible for the fabrication, installation and maintenance of all signs authorized for
placement on state maintained highway right‐of‐way.
2) All signs on state maintained highway right‐of‐way prohibiting the use of specific mobility devices shall
be fabricated in accordance with the current edition of the VDOT Road & Bridge Specifications and the
approved design specifications as shown herein.
3) The local residency permit office may alter the requested location based on sign spacing requirements
as outlined in the Manual on Uniform Traffic Control Devices (MUTCD), engineering judgment, and/or
safety concerns to protect the traveling public.
4) All signs should be located as close to the right‐of‐way line as reasonably possible.
5) All signs must be located in such a manner that will not interfere with sight distance for driveways and
intersections, be a distraction to motorists, or pose a safety hazard to the traveling public.
6) Signs shall not be installed in the median area of any state maintained highway, on a bridge, or within
500 feet of any bridge approach.
7) The permittee shall contact the local residency permit office prior to initiating excavation activities within
1,000 feet of traffic signals or adjacent to other VDOT utilities.
8) The permittee must notify the local residency permit office prior to initiating the installation of
authorized signs within state maintained highway right‐of‐way.
9) Upon completion of the installation of signs prohibiting the use of specific mobility devices, the
permittee shall provide notification, documented in writing or electronic communication, to the local
residency permit office requesting final inspection. This request shall include the permit number, county
name, and route number.
10) The permittee must contact the VDOT Customer Service Center at 1‐800‐367‐7623 a minimum of 48
hours prior to initiating any planned excavation within 1,000 feet of a signalized intersection and/or
near VDOT ITS infrastructure. Excavation activities may proceed only after the VDOT regional utility
location agent has notified the permittee that the utility marking has been completed. Additional
information can be found at:
4
http://www.virginiadot.org/business/resources/IIM/TE383_Request_for_Marking_VDOT_Utility_Loc
ation.pdf
Alternately, within all localities in the Northern Virginia Construction District, including the Counties of
Arlington, Fairfax, Loudoun & Prince William, the Cities of Alexandria, Fairfax, Falls Church, Manassas
and Manassas Park, and the Towns of Clifton, Dumfries, Hamilton, Haymarket, Herndon, Hillsboro,
Leesburg, Lovettsville, Middleburg, Occoquan, Purcellville, Quantico, Round Hill and Vienna, and on
Interstate 95 in the counties of Stafford, Spotsylvania and Caroline, the permittee may request VDOT
regional utility marking at: http://www.vdotutilitymarking.virginia.gov
Failure to carry out this requirement may result in permit revocation.
Traffic Control & Safety
1) The permittee shall at all times give strict attention to the safety and rights of the traveling public, their
employees, and contractors. Any permit may be revoked or suspended when in the opinion of the local
residency permit office, the safety, use or maintenance of the highway so requires.
2) In accordance with the Virginia Department of Transportation (VDOT) Road and Bridge Specification,
Special Provision 105.14, all activities performed under the auspices of a VDOT Land Use Permit
involving the installation, maintenance and removal of work zone traffic control devices must have an
individual on‐site who, at a minimum, is accredited by VDOT in Basic Work Zone Traffic Control. The
accredited person must have their VDOT Work Zone Traffic Control accreditation card in their
possession.
3) The individual accredited in Basic Work Zone Traffic Control is responsible for the placement,
maintenance and removal of work zone traffic control devices within the project limits in compliance
with the permit requirements and conditions, the approved plans and specifications, the Virginia Work
Area Protection Manual, and the Manual of Uniform Traffic Control Devices.
4) A person accredited by VDOT in Intermediate Work Zone Traffic Control must be on‐site to provide
supervision for adjustment to the approved layout or implementation of any standard Typical Traffic
Control (TTC) layouts outlined in the Virginia Work Area Protection Manual.
5) All traffic control plans shall be prepared by a person accredited by VDOT in Advanced Work Zone Traffic
Control.
6) Individuals responsible for implementation of work zone traffic control measures shall provide evidence
of their accreditation upon request from VDOT personnel.
7) The permittee shall be exempt from the requirements of Virginia Department of Transportation (VDOT)
Road and Bridge Specification, Special Provision 105.14 if the authorized activity does not involve the
5
installation, maintenance and removal of work zone traffic control devices and is not within the roadway
(as defined in 24VAC30‐151) of a state maintained highway.
8) Non‐compliance with the requirements outlined in VDOT Road and Bridge Specification, Special
Provision 105.14 may result in a stop work order and / or permit revocation.
9) All activities that require the disruption (stoppage) of traffic shall utilize VDOT certified flaggers. Flag
persons shall be provided in sufficient number and locations as necessary for control and protection of
vehicular and pedestrian traffic in accordance with the Virginia Work Area Protection Manual. All
flaggers must have their certification card in their possession when performing flagging operations
within state maintained right‐of‐way. Any flag person found not in possession of his/her certification
card shall be removed from the flagging site and the local residency permit office will suspend all
permitted activities.
10) Any VDOT certified flag person found to be performing their duties improperly shall have their
certification revoked.
11) The permittee shall immediately correct any situation that may arise as a result of these activities that
the local residency permit office deems hazardous to the traveling public.
12) During authorized activities, the permittee shall furnish all necessary signs, flag persons and other
devices to provide for the protection of traffic and workers in accordance with the Virginia Work Area
Protection Manual or as directed by the local residency permit office.
13) All signs shall be in accordance with the current edition of the Manual of Uniform Traffic Control Devices
(MUTCD).
14) Traffic shall not be blocked or detoured without permission, documented in writing or electronic
communication, being granted by the local residency permit office.
15) If directed by the district, requests for the implementation of temporary lane closures must be entered
into the VDOT Lane Closure Advisory Management System (LCAMS) and VaTraffic a minimum of one (1)
week prior to the planned execution of lane closure activities on state maintained highways. The
permittee or their contractor(s) may enter their requests directly or provide written requests to the
VDOT Regional Operations Center as follows:
Lane closure requests in all the counties listed below are within the Northern Region and shall be sent
Counties: Arlington, Fairfax, Loudoun, Prince William, Spotsylvania, Stafford
6
Lane closure requests in all the counties listed below are within the Northwest Region and shall be sent
Counties: Albemarle, Alleghany, Augusta, Bath, Clarke, Culpeper, Fauquier, Fluvanna, Frederick, Greene, Highland, Louisa, Madison, Orange Page, Rappahannock, Rockbridge, Rockingham, Shenandoah, Warren
Lane closure requests in all the counties listed below are within the Southwest Region and shall be sent
Counties: Amherst, Appomattox, Bedford, Bland, Botetourt, Buchanan, Buckingham, Campbell, Carroll, Charlotte, Craig, Cumberland, Dickenson, Floyd, Franklin, Giles, Grayson, Halifax, Henry, Lee, Montgomery, Nelson, Patrick, Pittsylvania Prince Edward, Pulaski, Roanoke, Russell, Scott, Smyth, Tazewell, Washington, Wise, Wythe
Lane closure requests in all the counties listed below are within the Eastern Region and shall be sent to:
Counties: Accomack, Greensville, Isle of Wight, James City, Northampton, Southampton, Surry, Sussex,
York
Lane closure requests in all the counties listed below are within the Central Region and shall be sent to:
Counties: Amelia, Brunswick, Caroline, Charles City, Chesterfield, Dinwiddie, Essex, Gloucester, Goochland, Hanover, Henrico, King and Queen, King George, King William, Lancaster, Lunenburg, Mathews, Mecklenburg, Middlesex, New Kent, Northumberland, Nottoway, Powhatan, Prince George, Richmond, Westmoreland
Written requests for implementation of temporary lane closures must be submitted to the appropriate
VDOT Regional Operations Center by close of business on the preceding Wednesday for the upcoming
week’s planned lane closures. All requests being directly input into LCAMS and VaTraffic must be
entered no later than 2:00 pm on the preceding Thursday for the upcoming week’s lane closure
activities. Any conflicts with other roadway work must be resolved by close of business on Thursday the
week prior to the scheduled lane closure activities with documented resolution sent to the VDOT point
of contact provided by the regional traffic operation center LCAMS Administrator. Any requests
received after these time limitations will not be approved and the proposed work within VDOT right of
way requiring lane closures must be rescheduled.
Lane closure requestors wanting direct access to LCAMS and VaTraffic must complete ITD‐35E & ITD‐36E
forms and return to Ms. Carlene McWhirt at [email protected]. Online training is
available for LCAMS and VaTraffic and VDOT can accommodate any additional training needs. Please
contact Ms. McWhirt at (571) 350‐2078 to schedule training.
7
Permit Revocation
At the discretion of the local residency permit office, the land use permit authorizing the installation
within state maintained right‐of‐way of signs prohibiting the use of specific mobility devices may be
revoked and all signs removed from within the right‐of‐way at the permittees expense should the signs
not be properly maintained, become detrimental to existing state maintained facilities or deemed
hazardous for vehicular and or pedestrian traffic. In addition, VDOT may apply additional penalties in
accordance with §33.2‐1221.
Permittee Notice
The preceding provisions are intentionally condensed in format and should not be loosely interpreted by
the permittee without consultation with the local residency permit office or the central office permit
manager and affirmation from the Land Use Permit Regulations.
LETTER POSITIONS (X)
SIGN DETAIL
TYPE:
TYPE:
COLOR:
COLOR:
MOUNTING
BACKGROUND
LEGEND/BORDER
WIDTH x HGHT.
SIGN NUMBER
CORNER RADIUS
BORDER WIDTH
SYMBOL X Y WID HT
Dimensions are in
LENGTH SERIES/SIZE
Panel Style:
ROT
EPDD Sign_12"x18"
1'-0" x 1'-6"
Ground
1.5"
0.375"
inches.tenths
regulatory sign.ssi
1:10
Letter locations are panel edge to lower left corner
Black/Black
Reflective
White
Reflective
E
2
L
3.1
E
4.2
C
5.2
T
6.3
R
7.3
I
8.5
C
9.1 7.9
B 2000
2
P
1.5
E
2.7
R
3.7
S
4.8
O
5.9
N
7.2
A
8.4
L
9.7 9
B 2000
2
D
1.9
E
3.1
L
4.2
I
5.2
V
5.8
E
7
R
8.1
Y
9.1 8.3
B 2000
2
D
2.5
E
3.7
V
4.6
I
5.8
C
6.5
E
7.7
S
8.7 7.1
B 2000
2
P
1.2
R
2.3
O
3.3
H
4.5
I
5.8
B
6.4
I
7.5
T
8
E
9
D
10 9.7
B 2000
2
1.15" 9.7" 1.15"
1'-0"
2"
2"B
1"
2"B
1"
2"B
1"
2"B
1"
2"B*
2"
1'-
6"
BORDER
R=1.5"
TH=0.375"
IN=0.375"* Reduce character spacing 20%
LETTER POSITIONS (X)
SIGN DETAIL
TYPE:
TYPE:
COLOR:
COLOR:
MOUNTING
BACKGROUND
LEGEND/BORDER
WIDTH x HGHT.
SIGN NUMBER
CORNER RADIUS
BORDER WIDTH
SYMBOL X Y WID HT
Dimensions are in
LENGTH SERIES/SIZE
Panel Style:
ROT
EPDD Plaque_9"x12"
1'-0" x 0'-9"
Ground
1.5"
0.375"
inches.tenths
regulatory sign.ssi
1:6
Letter locations are panel edge to lower left corner
Black/Black
Reflective
White
Reflective
E
1.3
L
1.8
E
2.3
C
2.8
T
3.4
R
3.9
I
4.5
C
4.8
5.2
P
6.2
E
6.8
R
7.4
S
7.9
O
8.4
N
9.1
A
9.7
L
10.3 9.5
B 2000
1
D
1.7
E
2.3
L
2.8
I
3.3
V
3.6
E
4.2
R
4.8
Y
5.3
5.8
D
6.8
E
7.4
V
7.9
I
8.5
C
8.8
E
9.4
S
9.9 8.7
B 2000
1
P
1.2
R
2.3
O
3.3
H
4.5
I
5.8
B
6.4
I
7.5
T
8
E
9
D
10 9.7
B 2000
2
1.15" 9.7" 1.15"
1'-0"
1.5"
1"B
0.75"
1"B
1"
2"B*
1.75"
0'-
9"
BORDER
R=1.5"
TH=0.375"
IN=0.375" * Reduce character spacing 20%
LETTER POSITIONS (X)
SIGN DETAIL
TYPE:
TYPE:
COLOR:
COLOR:
MOUNTING
BACKGROUND
LEGEND/BORDER
WIDTH x HGHT.
SIGN NUMBER
CORNER RADIUS
BORDER WIDTH
SYMBOL X Y WID HT
Dimensions are in
LENGTH SERIES/SIZE
Panel Style:
ROT
CITYWIDE_6"x12"_1.5"
1'-0" x 0'-6"
Ground
1.5"
0.375"
inches.tenths
regulatory sign.ssi
1:6
Letter locations are panel edge to lower left corner
Black/Black
Reflective
White
Reflective
C
2.4
I
3.5
T
3.9
Y
4.8
W
5.8
I
7.2
D
7.7
E
8.9 7.3
C 2000
1.5
2.35" 7.3" 2.35"
1'-0"
2.25"
1.5"C
2.25"0'-
6"
BORDER
R=1.5"
TH=0.375"
IN=0.375"
LETTER POSITIONS (X)
SIGN DETAIL
TYPE:
TYPE:
COLOR:
COLOR:
MOUNTING
BACKGROUND
LEGEND/BORDER
WIDTH x HGHT.
SIGN NUMBER
CORNER RADIUS
BORDER WIDTH
SYMBOL X Y WID HT
Dimensions are in
LENGTH SERIES/SIZE
Panel Style:
ROT
CITYWIDE_6"x12"_2"
1'-0" x 0'-6"
Ground
1.5"
0.375"
inches.tenths
regulatory sign.ssi
1:6
Letter locations are panel edge to lower left corner
Black/Black
Reflective
White
Reflective
C
1.2
I
2.7
T
3.2
Y
4.4
W
5.8
I
7.6
D
8.3
E
9.8 9.7
C 2000
2
1.15" 9.7" 1.15"
1'-0"
2"
2"C
2"
0'-
6"
BORDER
R=1.5"
TH=0.375"
IN=0.375"
LETTER POSITIONS (X)
SIGN DETAIL
TYPE:
TYPE:
COLOR:
COLOR:
MOUNTING
BACKGROUND
LEGEND/BORDER
WIDTH x HGHT.
SIGN NUMBER
CORNER RADIUS
BORDER WIDTH
SYMBOL X Y WID HT
Dimensions are in
LENGTH SERIES/SIZE
Panel Style:
ROT
CITYWIDE_9"x12"_2"
1'-0" x 0'-9"
Ground
1.5"
0.375"
inches.tenths
regulatory sign.ssi
1:6
Letter locations are panel edge to lower left corner
Black/Black
Reflective
White
Reflective
C
1.2
I
2.7
T
3.2
Y
4.4
W
5.8
I
7.6
D
8.3
E
9.8 9.7
C 2000
2
1.15" 9.7" 1.15"
1'-0"
3.5"
2"C
3.5"
0'-
9"
BORDER
R=1.5"
TH=0.375"
IN=0.375"
LETTER POSITIONS (X)
SIGN DETAIL
TYPE:
TYPE:
COLOR:
COLOR:
MOUNTING
BACKGROUND
LEGEND/BORDER
WIDTH x HGHT.
SIGN NUMBER
CORNER RADIUS
BORDER WIDTH
SYMBOL X Y WID HT
Dimensions are in
LENGTH SERIES/SIZE
Panel Style:
ROT
ON SIDEWALK_6"x12"_1.5"
1'-0" x 0'-6"
Ground
1.5"
0.375"
inches.tenths
regulatory sign.ssi
1:6
Letter locations are panel edge to lower left corner
Black/Black
Reflective
White
Reflective
O
1.2
N
2.1
2.8
S
4.3
I
5.2
D
5.7
E
6.6
W
7.3
A
8.4
L
9.4
K
10.2 9.7
B 2000
1.5
1.15" 9.7" 1.15"
1'-0"
2.25"
1.5"B
2.25"0'-
6"
BORDER
R=1.5"
TH=0.375"
IN=0.375"
LETTER POSITIONS (X)
SIGN DETAIL
TYPE:
TYPE:
COLOR:
COLOR:
MOUNTING
BACKGROUND
LEGEND/BORDER
WIDTH x HGHT.
SIGN NUMBER
CORNER RADIUS
BORDER WIDTH
SYMBOL X Y WID HT
Dimensions are in
LENGTH SERIES/SIZE
Panel Style:
ROT
ON SIDEWALK_9"x12"_1.5"
1'-0" x 0'-9"
Ground
1.5"
0.375"
inches.tenths
regulatory sign.ssi
1:6
Letter locations are panel edge to lower left corner
Black/Black
Reflective
White
Reflective
O
5
N
6.2 2
C 2000
1.5
S
2.1
I
3.2
D
3.7
E
4.8
W
5.7
A
7
L
8.1
K
9.1 7.9
C 2000
1.5
2.05" 7.9" 2.05"
1'-0"
2.35"
1.5"C
1.3"
1.5"C
2.35"
0'-
9"
BORDER
R=1.5"
TH=0.375"
IN=0.375"
LETTER POSITIONS (X)
SIGN DETAIL
TYPE:
TYPE:
COLOR:
COLOR:
MOUNTING
BACKGROUND
LEGEND/BORDER
WIDTH x HGHT.
SIGN NUMBER
CORNER RADIUS
BORDER WIDTH
SYMBOL X Y WID HT
Dimensions are in
LENGTH SERIES/SIZE
Panel Style:
ROT
ON SIDEWALK_9"x12"_2"
1'-0" x 0'-9"
Ground
1.5"
0.375"
inches.tenths
regulatory sign.ssi
1:6
Letter locations are panel edge to lower left corner
Black/Black
Reflective
White
Reflective
O
4.7
N
6.2 2.7
C 2000
2
S
1.1
I
2.5
D
3
E
4.4
W
5.5
A
7.1
L
8.5
K
9.7 9.7
C 2000
2
1.15" 9.7" 1.15"
1'-0"
2"
2"C
1"
2"C*
2"
0'-
9"
BORDER
R=1.5"
TH=0.375"
IN=0.375" * Reduce character spacing 40%
LETTER POSITIONS (X)
SIGN DETAIL
TYPE:
TYPE:
COLOR:
COLOR:
MOUNTING
BACKGROUND
LEGEND/BORDER
WIDTH x HGHT.
SIGN NUMBER
CORNER RADIUS
BORDER WIDTH
SYMBOL X Y WID HT
Dimensions are in
LENGTH SERIES/SIZE
Panel Style:
ROT
DOWNTOWN_6"x12"_1.5"
1'-0" x 0'-6"
Ground
1.5"
0.375"
inches.tenths
regulatory sign.ssi
1:6
Letter locations are panel edge to lower left corner
Black/Black
Reflective
White
Reflective
D
1.6
O
2.7
W
3.8
N
5.1
T
6.2
O
7.1
W
8.2
N
9.6 8.8
C 2000
1.5
1.6" 8.8" 1.6"
1'-0"
2.25"
1.5"C
2.25"0'-
6"
BORDER
R=1.5"
TH=0.375"
IN=0.375"
LETTER POSITIONS (X)
SIGN DETAIL
TYPE:
TYPE:
COLOR:
COLOR:
MOUNTING
BACKGROUND
LEGEND/BORDER
WIDTH x HGHT.
SIGN NUMBER
CORNER RADIUS
BORDER WIDTH
SYMBOL X Y WID HT
Dimensions are in
LENGTH SERIES/SIZE
Panel Style:
ROT
DOWNTOWN_6"x12"_2"
1'-0" x 0'-6"
Ground
1.5"
0.375"
inches.tenths
regulatory sign.ssi
1:6
Letter locations are panel edge to lower left corner
Black/Black
Reflective
White
Reflective
D
1.2
O
2.4
W
3.5
N
5.1
T
6.2
O
7.2
W
8.4
N
9.9 9.6
B 2000
2
1.2" 9.6" 1.2"
1'-0"
2"
2"B
2"
0'-
6"
BORDER
R=1.5"
TH=0.375"
IN=0.375"
LETTER POSITIONS (X)
SIGN DETAIL
TYPE:
TYPE:
COLOR:
COLOR:
MOUNTING
BACKGROUND
LEGEND/BORDER
WIDTH x HGHT.
SIGN NUMBER
CORNER RADIUS
BORDER WIDTH
SYMBOL X Y WID HT
Dimensions are in
LENGTH SERIES/SIZE
Panel Style:
ROT
DOWNTOWN_9"x12"_2"
1'-0" x 0'-9"
Ground
1.5"
0.375"
inches.tenths
regulatory sign.ssi
1:6
Letter locations are panel edge to lower left corner
Black/Black
Reflective
White
Reflective
D
1.2
O
2.4
W
3.5
N
5.1
T
6.2
O
7.2
W
8.4
N
9.9 9.6
B 2000
2
1.2" 9.6" 1.2"
1'-0"
3.5"
2"B
3.5"
0'-
9"
BORDER
R=1.5"
TH=0.375"
IN=0.375"
LETTER POSITIONS (X)
SIGN DETAIL
TYPE:
TYPE:
COLOR:
COLOR:
MOUNTING
BACKGROUND
LEGEND/BORDER
WIDTH x HGHT.
SIGN NUMBER
CORNER RADIUS
BORDER WIDTH
SYMBOL X Y WID HT
Dimensions are in
LENGTH SERIES/SIZE
Panel Style:
ROT
BEGIN_6"x12"_1.5"
1'-0" x 0'-6"
Ground
1.5"
0.375"
inches.tenths
regulatory sign.ssi
1:6
Letter locations are panel edge to lower left corner
Black/Black
Reflective
White
Reflective
B
3.7
E
4.8
G
5.8
I
6.9
N
7.5 4.6
C 2000
1.5
3.7" 4.6" 3.7"
1'-0"
2.25"
1.5"C
2.25"0'-
6"
BORDER
R=1.5"
TH=0.375"
IN=0.375"
LETTER POSITIONS (X)
SIGN DETAIL
TYPE:
TYPE:
COLOR:
COLOR:
MOUNTING
BACKGROUND
LEGEND/BORDER
WIDTH x HGHT.
SIGN NUMBER
CORNER RADIUS
BORDER WIDTH
SYMBOL X Y WID HT
Dimensions are in
LENGTH SERIES/SIZE
Panel Style:
ROT
BEGIN_6"x12"_2"
1'-0" x 0'-6"
Ground
1.5"
0.375"
inches.tenths
regulatory sign.ssi
1:6
Letter locations are panel edge to lower left corner
Black/Black
Reflective
White
Reflective
B
2.9
E
4.4
G
5.7
I
7.2
N
8 6.1
C 2000
2
2.95" 6.1" 2.95"
1'-0"
2"
2"C
2"
0'-
6"
BORDER
R=1.5"
TH=0.375"
IN=0.375"
LETTER POSITIONS (X)
SIGN DETAIL
TYPE:
TYPE:
COLOR:
COLOR:
MOUNTING
BACKGROUND
LEGEND/BORDER
WIDTH x HGHT.
SIGN NUMBER
CORNER RADIUS
BORDER WIDTH
SYMBOL X Y WID HT
Dimensions are in
LENGTH SERIES/SIZE
Panel Style:
ROT
BEGIN_9"x12"_2"
1'-0" x 0'-9"
Ground
1.5"
0.375"
inches.tenths
regulatory sign.ssi
1:6
Letter locations are panel edge to lower left corner
Black/Black
Reflective
White
Reflective
B
2.9
E
4.4
G
5.7
I
7.2
N
8 6.1
C 2000
2
2.95" 6.1" 2.95"
1'-0"
3.5"
2"C
3.5"
0'-
9"
BORDER
R=1.5"
TH=0.375"
IN=0.375"
LETTER POSITIONS (X)
SIGN DETAIL
TYPE:
TYPE:
COLOR:
COLOR:
MOUNTING
BACKGROUND
LEGEND/BORDER
WIDTH x HGHT.
SIGN NUMBER
CORNER RADIUS
BORDER WIDTH
SYMBOL X Y WID HT
Dimensions are in
LENGTH SERIES/SIZE
Panel Style:
ROT
END_6"x12"_1.5"
1'-0" x 0'-6"
Ground
1.5"
0.375"
inches.tenths
regulatory sign.ssi
1:6
Letter locations are panel edge to lower left corner
Black/Black
Reflective
White
Reflective
E
4.5
N
5.5
D
6.7 3
C 2000
1.5
4.5" 3" 4.5"
1'-0"
2.25"
1.5"C
2.25"0'-
6"
BORDER
R=1.5"
TH=0.375"
IN=0.375"
LETTER POSITIONS (X)
SIGN DETAIL
TYPE:
TYPE:
COLOR:
COLOR:
MOUNTING
BACKGROUND
LEGEND/BORDER
WIDTH x HGHT.
SIGN NUMBER
CORNER RADIUS
BORDER WIDTH
SYMBOL X Y WID HT
Dimensions are in
LENGTH SERIES/SIZE
Panel Style:
ROT
END_6"x12"_2"
1'-0" x 0'-6"
Ground
1.5"
0.375"
inches.tenths
regulatory sign.ssi
1:6
Letter locations are panel edge to lower left corner
Black/Black
Reflective
White
Reflective
E
4
N
5.3
D
6.9 4
C 2000
2
4" 4" 4"
1'-0"
2"
2"C
2"
0'-
6"
BORDER
R=1.5"
TH=0.375"
IN=0.375"
LETTER POSITIONS (X)
SIGN DETAIL
TYPE:
TYPE:
COLOR:
COLOR:
MOUNTING
BACKGROUND
LEGEND/BORDER
WIDTH x HGHT.
SIGN NUMBER
CORNER RADIUS
BORDER WIDTH
SYMBOL X Y WID HT
Dimensions are in
LENGTH SERIES/SIZE
Panel Style:
ROT
END_9"x12"_2"
1'-0" x 0'-9"
Ground
1.5"
0.375"
inches.tenths
regulatory sign.ssi
1:6
Letter locations are panel edge to lower left corner
Black/Black
Reflective
White
Reflective
E
4
N
5.3
D
6.9 4
C 2000
2
4" 4" 4"
1'-0"
3.5"
2"C
3.5"
0'-
9"
BORDER
R=1.5"
TH=0.375"
IN=0.375"