landscape guidelines, modification guidelines …...water features/ponds 14 ... clotheslines 15...
TRANSCRIPT
Hamilton Mill Community Association
LANDSCAPE GUIDELINES,
MODIFICATION GUIDELINES
MAINTENANCE RULES & REGULATIONS
Revised July 30, 2020
Revised June 26, 2020
Revised March 1, 2019
Revised July 9, 2017
Revised July 9, 2012
Hamilton Mill Community Association – Design Guidelines Page 2 of 39 Effective June 26, 2020 Version 7
TABLE OF CONTENTS
INTRODUCTION
The Hamilton Mill Community 4
Purpose of the Design Guidelines 5
The Modification Review Committee 6
Limitation of Responsibilities 6
APPLICATION PROCEDURE 7
GUIDELINES FOR MODIFICATION AND MISCELLANEOUS STRUCTURES
Exterior House Standards
Fences 11
Retaining Walls 11
Decks 11
Painting 11
Roofing 12
Attached Structures and Additions 12
Storm Windows and Doors 12
Awnings 13
Window Boxes 13
Driveways 13
Parking Pads 13
Patios/Walkways 13
Patio Covers & Trellises 14
Detached Buildings 14
Mailbox/Mailbox Post 14
Landscaping Items
Gazebos 14
Water Features/Ponds 14
Exterior Lighting 14
Exterior Decorative Objects 15
Clotheslines 15
Vegetable/Garden Plots 15
Woodpile, Air Conditioning Units, Garbage Cans/Recycle Bins 15
Recreational Equipment
Pools and Hot Tubs 15
In-Ground Pools 16
Play Houses/Tree Houses 16
Hamilton Mill Community Association – Design Guidelines Page 3 of 39 Effective June 26, 2020 Version 7
Play Equipment 16
Basketball Goals 17
Tennis Courts 17
Miscellaneous Items
Dog Houses 17
Pet Management 17
Parking 18
Vehicle Maintenance 18
Plants and Flowerpots 18
Front Porch/Stoops 18
Storage and Garden Sheds 18
Holiday Decorations 19
Flags 19
Signage 19
Spirit Signs 19
Satellite Dishes 20
LANDSCAPE GUIDELINES
Landscaping 21
Mulching 21
Edging 21
Landscaping Standards 21
Landscape Beds/Trees/Bushes
MAINTENANCE RULES AND REGULATIONS
Exterior Maintenance 22
Acceptable Storm Water Control Practices 22
Acceptable Landscape Maintenance Practices 22
Debris 23
Basketball Goal Maintenance 23
Hamilton Mill Community Association – Design Guidelines Page 4 of 39 Effective June 26, 2020 Version 7
Mailbox & Post Maintenance 23
EXHIBIT “A” FENCE GUIDELINES 24
SIGN GUIDELINE 30
SATELLITE DISH INSTALLATION FORM 32
REQUEST FOR MODIFICATION REVIEW FORM 33
INTRODUCTION
The Hamilton Mill Community Hamilton Mill is a residential community oriented to families of all sizes and ages. It is designed
with a sense of “hometown” and a high quality standard of living for its residents.
Special care was taken in the planning of the community to integrate it with the site’s natural
features. Through this well-conceived plan, we invite you to share the trails, the lake, the swim,
tennis and play facilities – all designed to create a “hometown” sense of place for all members of
the family. In addition, the championship Fred Couples/Gene Bates designed golf course is
available on a membership basis to all residents and to the public. These elements along with a
well-conceived architectural style have done much to set the mood for gracious community
living.
The architectural style reflects a subtle blending of classic American styles that have given
definition to the hometown feeling that most of us are familiar with. The use of traditional
classic material such as wood, stone and brick was encouraged as building elements to create
homes that reflect the vast heritage of architectural styles that make up what we call classic
design.
Proper residential site planning was an important element in creating a harmonious hometown
community. Correct placement of the houses on lot to enhance views and save trees was vitally
important. Creative driveway design (to accompany attractive garage design) to emphasize the
Hamilton Mill Community Association – Design Guidelines Page 5 of 39 Effective June 26, 2020 Version 7
architecture of the house rather than the function of car storage was another important site
planning decision.
Landscape design that emphasizes the coordinated flow between lots is also an important
element in creating a harmonious feeling of community.
PURPOSE OF THE DESIGN GUIDELINE
These Design Guidelines for Hamilton Mill provide an overall framework and a comprehensive
set of standards to allow the community to develop and progress in an orderly and cohesive
manner.
They establish criteria for architectural design and style, site improvements and type of
landscaping required.
The Design Guidelines also establish a process for review of proposed construction and
modification of properties to ensure that all sites within Hamilton Mill will be developed with
the consistency and quality that continues to attract people to this community.
If any local government ordinance, building code or regulation requires a more restrictive
standard than the standards set forth in these Design Guidelines or the Declaration of Covenants,
Conditions, and Restrictions (the Declaration), the local government standards shall prevail. If
any government standard is less restrictive that these Design Guidelines or the Declaration, the
Declaration and Design Guidelines (in that order) shall prevail.
The Design Guidelines may be changed and amended to serve the needs of an evolving
community, as set forth in the Declaration and in these Guidelines.
In summary, the objective of these Design Guidelines is to create the architectural and site
planning statement to make Hamilton Mill truly a hometown for its residents. This basic guide to
standards in design, construction and environmental management will make it easy for you, the
homeowner to understand how your participation may influence the course of our planned
community.
THE DESIGN REVIEW COMMITTEE One of the most effective methods of assuring protection of the community lifestyle and
individual property values is through the establishment of high standards of design review.
Property owners are legally bound by the Declaration and these Design Guidelines.
To that end, no construction activity (including staking, clearing and grading), no leveling,
accessory building, fences, walls, or other structures of any kind shall be erected, placed, or
altered on any lot within the community until the proposed building plans, elevations,
specifications, exterior colors or finishes, site plans, and construction schedules shall have been
approved in writing by the appropriate committee as described below.
Hamilton Mill Community Association – Design Guidelines Page 6 of 39 Effective June 26, 2020 Version 7
Modifications Committee
The Modification Committee (MC) has exclusive jurisdiction over modifications, additions, and
alterations made to structures and landscaping on lots. After the structures and landscaping have
been completed on a lot according to the approved plans, the MC shall review all proposed
changes to the exterior of the structure and the lot. The MC will also have the authority to
change standards and procedures, consistent with those of these Design Guidelines.
LIMITATIONS OF RESPONSIBILITIES
The primary goal of the Committee is to review the application, plans, specifications, materials,
and samples submitted and to determine if the proposed alteration conforms in appearance and
construction criteria with the standards and policy as set forth by the Committee. The
Committee does not assume responsibility for the following:
1. The structural adequacy, capacity or safety features of the proposed improvement or
modification.
2. Soil erosion, not compacted or unstable soil conditions, or site/drainage elevations.
3. Compliance with any of all building codes, safety requirements, governmental laws,
regulations or ordinances.
4. Performance or quality of work of any contractor.
APPLICATION PROCEDURE General Instructions
Step 1 - Submitting Modification Request Form
No work may begin on the modification requested until the homeowner receives written approval
from the Modification Committee (MC) and the MC issued permit is displayed in a street facing
window. The Property Manager will mail the approval to the homeowner.
Submission for modifications must include:
• Request for Modification Review form, completed in full and signed by the homeowner
• Three copies of all supporting documentation required for a review and decision by the
MC. As applicable to the request, support must include:
1. Complete plans and specifications with materials list to scale showing the floor
plans and roof plans and all front, rear and side elevations.
2. Exterior finish schedule indicating roofing materials and other exterior materials,
finishes and textures (may be noted on architectural plans). Exterior color
schedule, indicating paint colors, roofing colors, stucco colors, brick and mortar
selections, and trim colors. The homeowner must submit samples of all of the
above applicable selections.
Hamilton Mill Community Association – Design Guidelines Page 7 of 39 Effective June 26, 2020 Version 7
3. Site plans in an approved format (1” = 20’) showing the location of all existing
and proposed structures, building setback lines, driveways, walks, retaining walls
and open space, clearly drawn to scale.
4. Landscaping plans (1” = 20’) showing location of all existing and proposed
structures, building setback lines, driveways, walks, retaining walls, grassed
areas, natural areas, plant locations, plant species, plant sizes, drainage and
structures.
Homeowners should submit photocopies of all plans and documentation. All submitted plans
become the property of the MC and will not be returned, but filed for future reference and
verification.
All documentation including architectural drawings, photographs, property survey showing
improvements, and description of materials should be mailed to our property management:
Community Management Associates, Inc.
Managing Agents for Hamilton Mill Community Association, Inc.
1669 Hamilton Mill Parkway
Dacula, Georgia 30019
Step 2 - On-Site Review Process
The purpose of the on-site review is for the Modification Committee representatives to assess the
impact the request may have to neighbors, and the general quality of the community. The on-
site visit is usually brief (5-20 minutes) with limited homeowner involvement required.
However, we recommend that a homeowner be available to answer questions for more complex
plans submitted and to help expedite the approval process.
Step 3 - Decision Process
Upon completion of the on-site review, the MC will respond to the request with one of three
decisions:
• Request Approved as Presented
• Request Approved with Conditions
• Request Not Approved as Presented
The Property Manager will contact the homeowner in writing with the decision, including an
explanation of the decision if required.
• Request Approved as Presented - The plan was accepted as documented and the
homeowner can begin the requested changes immediately. All work must be done in
accordance with the plans as approved by the MC. Any variances to the approved plan
require another Modification Request be submitted for approval.
Hamilton Mill Community Association – Design Guidelines Page 8 of 39 Effective June 26, 2020 Version 7
• Request Approved with Conditions - The plan was accepted with specific conditions
provided. The homeowner should review the conditions and, if in agreement, can begin
the requested changes immediately. If the homeowner is not in agreement with the
conditions required, the owner may re-submit revised plans.
• Request Not Approved as Presented - If the plan was not approved, an explanation will
be provided. In many cases, the MC will recommend one or more alternative solutions.
If the homeowner is receptive to one of these solutions, they must submit a letter and a
copy of the denied request to the MC detailing their agreement with the proposed
solution selected. The MC must approve the homeowner’s plan before the homeowner
can proceed with their request.
• Committee reserves the right to require additional screening to any completed
project.
Once the Modification Committee formally approves plans in writing, the homeowner can begin
work on the improvements or alterations immediately upon posting the issued permit in a front
window of the dwelling. Work on all approved modification requests must begin within 6
months of written approval date and must be substantially completed within 90 days of start of
work.
1. Fee for Non-Approval of Modifications
All exterior modifications made to your home/lot must be submitted and approved in
writing by the Modifications Committee prior to the start of any work on the project.
You must receive written approval and a permit prior to beginning any type of work.
Failure to get prior approval before starting and/or completing any exterior work on
your home is a violation of the Design Guidelines and subject to an immediate fine.
Effective January 1, 2018, a minimum $500.00 fine will be accessed to any
homeowner that starts and/or completes work on a exterior modification without prior
written approval and a permit from the Modifications Committee. A homeowner is
violation will have 10 days to correct the violation.
If a homeowner is found to have made an unapproved modification to their property,
that homeowner will be sent an immediate notice and a minimum $500.00 fine for
violating the policy if not corrected within 10 days. The fine must be paid within 30
days. In addition to paying the fine, the homeowner will be required to fill out and
submit the proper paperwork for approval to the neighborhoods management
company within 10 days. Any paperwork not submitted within 10-days of written
notice will result in another $25 fine per day. This will continue until the situation is
resolved.
If a homeowner continues to be a consistent repeat offender, that resident may be
asked to come before the Board of Directors to address the situation.
Hamilton Mill Community Association – Design Guidelines Page 9 of 39 Effective June 26, 2020 Version 7
Failure to pay any levied fines will be treated in the same manner as any other unpaid
assessment and may restrict, but not be limited to removal of tennis, pool and club
house privileges.
Disputes should be made to the management company and will be addressed by the
Modification Committee on a case-by-case basis.
Non-Compliance/Violation Fines
Violations are brought to the attention of Hamilton Mill Community Association’s Management
Company. This may be accomplished either by periodic (twice monthly) visual inspections by a
management company representative, or reported to the management company by other
subdivision residents. In the event of a violation:
• Homeowner will receive a Courtesy Notice from the management company that will
state the violation and necessary corrective action, and the deadline for correction.
• If the initial letter is not successful, a second letter will be sent by the management
company, restating the violation and corrective action required, and giving the
homeowner 10 days from the date of the letter to correct the violation.
• Should the homeowner not comply with either of the above requests, a third letter will be
sent notifying the homeowner of the next actions to be taken by the Association:
a. Certified notice will be sent stating the date fines will begin and the
violation will be remanded to the Association’s attorney for mediation.
The Certified Notice will also notify the homeowner that they have 10
days from the date of the letter to request a hearing with the Board of
Directors to contest the violation and that failure to do so voids any rights
to contest assessed fines.
b. Should all attempts to compel compliance fail, the violation will be
referred to the Association’s legal counsel for dispute resolution as
required by the Declaration of Covenants, Conditions and Restrictions for
Hamilton Mill Community Association.
In the case of a major violation (unapproved exterior modifications currently underway, a
dangerous situation, etc.), the first action will be the Certified Notice from the Association,
followed immediately by legal action to obtain a temporary restraining order (this type of
violation does not require arbitration).
Disclaimers
Approval of any exterior modification by the Modification Committee is in no way a
certification that the exterior modification has been built in accordance with any governmental
rules or that the exterior modification complies with sound building practices. Homeowners are
Hamilton Mill Community Association – Design Guidelines Page 10 of 39 Effective June 26, 2020 Version 7
required by law to obtain a building permit for all new construction. For information on
obtaining a building permit in Gwinnett County, contact County Planning at (770) 822-7530.
The Guidelines set forth herein have not been reviewed for engineering or structural design or
quality of materials. In fact, it is very likely that certain standards have been adopted solely on
the basis of aesthetic consideration. Therefore, no one should use or rely upon these Design
Standards as standards for structural integrity or soundness of design for any construction or
modification of a exterior modification or for ensuring compliance of any activity or construction
with building codes, zoning regulations and other governmental requirements. These things
must be determined by, and are the sole responsibility of, each Homeowner within the
community.
Please remember that, like the Guidelines, plans and specifications are not reviewed for
engineering or structural design or quality of materials. By approving such plans and
specifications, neither the Modification Committee, the members thereof, nor the Association
assumes any liability or responsibility therefore, or for any defect in any exterior modification
constructed from such plans and specifications.
Neither the Developer, the Association, the Modification Committee, the Board, nor the officers,
members, employees and agents of any of them shall be liable in damages to anyone submitting
plans and specifications to any of them for approval, or to any Owner of property affected by the
Declaration by reason of mistake in judgment, negligence, or nonfeasance arising out of or in
connection with the approval or disapproval or failure to approve or disapprove any such plans
or specifications.
It is the sole responsibility of the homeowner to ensure that exterior modifications are safe.
Approval of any type of exterior modification, including children’s playsets, by the Modification
Committee is in no way a guarantee of the safety of individuals on the equipment.
In accordance with the Covenants, every person submitting plans or specifications and every
Homeowner agrees that they will not bring any action or suit against the Association, the
Modification Committee, the Board or the officers, directors, members, employees and agents of
any of them for damages or otherwise.
Hamilton Mill Community Association – Design Guidelines Page 11 of 39 Effective July 30, 2020 Version 8
GUIDELINES FOR MODIFICATION & MISCELLANEOUS
EXTERIOR MODIFICATIONS
EXTERIOR HOUSE STANDARDS Fences All fences must be specifically approved in writing by the Modification Committee for both
design and location prior to being constructed or installed. Approved fence designs shall be as
shown in Exhibit “A”. Fence locations are generally approved to be to the rear of the house and
to the property lines or directly behind the house. Exception to these guidelines may be made to
avoid utility meters, air conditioning equipment, trees, severe slopes, and to enclose basement
doors. Corner lot fence in the street side yard shall be no closer to the street than the building
line, no closer to the street than the front of the house on the adjoining lot and may be required to
be screened with landscaping. Fences are not allowed in buffers or landscape easements. Fences
may be left natural or may be clear sealed or stained in a pre-approved color, such as Behr #500,
unless otherwise approved.
Retaining Walls Retaining walls that attach to the residence and are visible from any street should utilize the same
materials as the residence they adjoin. Cross-tie and landscape timber walls may be used if set
apart from the residence and if to the rear of the house. Walls must not interfere with the flow of
storm water in easements. It is recommended that retaining walls not cross easements.
Decks A Modification Request form must be submitted for all decks, including extensions and
alterations. The Modification Request form must include a site plan denoting location,
dimensions, materials and color. The following areas will be reviewed:
a. Location, size, conformity with the design of the house, relationship to neighboring
dwellings and proposed use.
b. Materials to be used. Materials must be cedar, cypress, or No 2 grade (or better) pressure
treated pine. Trex and similar materials will be considered.
c. The deck must not extend past the sidelines of the house.
d. The color must be natural or neutral, unless the pre-approved color scheme is utilized
(rails, pickets and underpinning the same color as the trim on the home and the deck floor
a color complimentary to the house body color). Golf course lots are required to be the
pre-approved color scheme.
e. Vertical supports for wood decks must be a minimum of 6 x 6-inch wood posts or painted
metal poles (black) or stacked brick to match the house.
f. Owners are advised that a building permit is required for decks.
Painting Any change to the exterior color of the house including, but not limited to doors, shutters,
gutters, trim, garage doors, brick and siding must be approved by the Modifications Committee.
Repainting requires prior written approval only if the color is changed. If repainting with no
Hamilton Mill Community Association – Design Guidelines Page 12 of 39 Effective July 30, 2020 Version 8
color change, it is the homeowners’ responsibility to ensure that the repaint color is exactly the
same color and shade as the one previously used. A paint color change requires the following
information:
a. Paint sample chip, with the manufacturer’s name and color number. At the discretion of
the MC, the homeowner may be required to paint a small sample of the house with the
color change, if the color change is significant.
b. All trim must be the same color, including exterior window and door trim, and any
columns/supports. The garage door must be the same color as the trim, unless the theme
of the house is such that the garage door may be painted in a different manner (i.e.,
carriage doors, in which case the trim boards will be painted the house’s trim color, and
the interior panels will be the siding color). Garage doors will only be considered to be
the body (siding or stucco) color of the home if the garage doors are on the elevation of
the house containing predominantly the body color. For example, if your garage is on the
front of the house, which is predominantly brick, the garage doors would only be
approved to be the trim color, they could not be the color of the siding on the rear or side
elevation.
Paint sheen may be no glossier than satin, with the exception of entry doors and shutters, which
may be high gloss.
c. Description of area of home to be repainted.
d. Photograph of your home and homes on either side (adjacent homes cannot be painted the
same color.) Houses in the surrounding area will also be taken into consideration when
approving colors.
Roofing New roofs shall follow the same style and color standard originally installed by the builder. If
roofing with no color or style change, it is the homeowners’ responsibility to ensure that the
roof color is exactly the same color and shade as the one previously used. The roof shall
include at least a 20-year shingle warranty and all exceptions must be approved by the
Modification Committee.
Attached Structures and Additions Attached structures and additions must be designed and constructed to be compatible with the
existing house. A Modification Request Form must be submitted for all attached structures and
additions.
Storm Windows & Doors Any alterations to the exterior of the house including but not limited to, doors, shutters, gutters,
trim and exterior siding, must be approved by the Modifications Committee. The Modification
Request Form must contain the following information:
a. Picture or drawing of all windows/doors on which storm windows/doors will be installed.
Hamilton Mill Community Association – Design Guidelines Page 13 of 39 Effective July 30, 2020 Version 8
b. Picture depicting the style of storm window/door which will be installed.
c. Color
Front entry doors should be solid panel or a minimum of ½ lite glass door. Leaded glass doors
may be permitted in the front of the house when approved by the Modification Committee.
Stained glass windows are not permitted in doors or windows that are in the front of the house.
Requests for these items in the back or side of the home must be submitted to the Modifications
Committee, which will make a decision based on the impact to surrounding houses.
Storm windows and doors must be made of aluminum with baked enamel finish to match the
surrounding trim. Storm doors may be made of wood painted to match the surrounding trim.
Window treatments should have a uniform, neutrally colored, neat appearance as viewed from
the street. Standard window treatments (not sheets) must be used for window coverings.
Awnings A Modification Request Form must be submitted for all awnings. Awnings or coverings must be
either canvas or a structural extension of the home’s existing roof. Colors or finish must be
compatible with the home’s primary and trim colors. Addition of awnings or coverings requires
the following information:
a. A picture or drawing of all window/doors on which awnings will be installed and their
location (back or side – generally, awnings are not allowed on the front of the home):
b. A picture depicting style of awning to be installed; and
c. Color samples and materials list.
Window Boxes A Modification Request Form must be submitted for all window boxes. Window boxes should be
kept planted with healthy plants appropriate to the location. Artificial vegetation is not permitted
in window boxes.
Driveways All driveways should be natural concrete or as originally installed. Any alterations such as but
not limited to brick, stone, stamping, or painting must submit a Modification Request Form.
Driveways must lead to a garage.
Parking Pads Parking Pads are discouraged and must be approved. Parking Pads must be behind the front
corner of the garage and must be screened from adjacent houses with landscaping.
Hamilton Mill Community Association – Design Guidelines Page 14 of 39 Effective July 30, 2020 Version 8
Patios/Walkways A Modification Request Form must be submitted for patios, walkways, patio covers, trellises,
permanent seating, railing and other items. The following guidelines are suggested for a patio
submittal:
a. The patio is not to be used as a permanent basketball court
b. The patio is not more than 750 square feet
c. The patio is screened with fencing and/or landscaping from the neighboring homes
d. The patio/walkway is located in the rear yard
e. The patio/walkway does not extend beyond the sidelines of the house
f. The patio/walkway does not extend to within 10 feet of side or rear property lines
g. The patio/walkway’s elevation above ground at any point does not exceed 6 inches for
patios and 4 inches for walkways
h. The patio/walkway does not exceed 4 feet in width and may not be used as a driveway or
parking pad.
Patio Covers & Trellises Patio covers & trellises should be constructed of cedar, redwood or pressure treated pine and
should be finished to match the trim of the house or in harmony with the surroundings, and shall
be detailed to be compatible with the design of the house. Patio covers and trellises should be
installed behind out of view from the street unless otherwise approved
Detached Buildings A Modification Request Form must be submitted for all detached buildings (i.e. detached
garages, ancillary buildings, etc. Play houses are covered under a separate heading). Detached
buildings are discouraged, though may be approved if designed and constructed in a way to
appear to be a part of the original structure. Detached buildings will not be approved to begin
further back than the rear corner of the house
Mailbox/Mailbox Post Mailboxes, street numbers, and posts must be the same standard size, color and design as those
installed by the developer, and shall be kept in good, neat repair. House numbers should be on
both sides of mailbox post and should be in keeping with those originally installed. To replace
missing or damaged parts, please call the property manager who can direct you to where the
original box was purchased.
LANDSCAPE ITEMS
Gazebos Gazebos are allowed but must be specifically approved by Modification Committee. The
Modification Request Form must include a site plan denoting location, dimensions, materials and
color. The following areas will be reviewed:
Hamilton Mill Community Association – Design Guidelines Page 15 of 39 Effective July 30, 2020 Version 8
• Location, size, conformity with the design of the house, relationship to neighboring
dwellings, and proposed use.
• Materials to be used: Materials must be cedar, cypress, or No. 2 grade (or better) pressure
treated pine. In most cases, building material must match or complement the existing
materials used on the house and deck.
• All gazebos must be placed between the sidelines of the house, and within the rear yard.
• All gazebos require a building permit.
• The color must be natural or stained to blend in with the natural surroundings.
Water Features/Ponds Water features/Ponds must be approved in advance. Requests should include detailed plans with
a materials list and a photo or brochure of proposed completed project.
Exterior Lighting A Modification Request Form must be submitted for all exterior lighting.
Exterior lighting is generally acceptable as follows: utility/security lighting will normally be
approved if installed in the soffit and to the rear of the front corners of the house and directed
away from the street and adjoining properties. Carriage type pole lights may be approved within
the building lines. Minimum accent lighting will be considered. All accent lights must be
maintained in good, neat condition, perpendicular to the ground. Exterior bulbs must be clear
(with the exception of during the Holiday Season as specified in the Holiday Décor section in
this document).
Exterior Decorative Objects The Declaration of Covenants requires Modification Committee approval before any object or
thing is erected or placed upon a lot. The Modification Committee thus has authority to regulate
the objects with this Guideline.
A Modification Request Form must be submitted and approved for all exterior decorative
objects, both natural and manmade. Exterior objects include items such as birdbaths, bird
feeders, bridges, wagon wheels, sculptures, fountains, pools, antennas, benches and porch
swings, free standing poles of all types, flag poles, and items attached to approved structures.
Objects will be evaluated on criteria such as sighting, proportion, color and appropriateness to
surrounding environment.
Plants and Flower Pots Front doors and entry decorations must be tasteful and in keeping with the style and colors of the
house. Plants and flowerpots must always be neat and healthy. Flower pots shall be shaped as
traditional flower pots or urns. Any other shape, animal or otherwise, is considered statuary, and
is required to be approved as an exterior decorative object. Neatly maintained front porch
flowerpots (maximum of four) that coordinate with the exterior home colors and containing
evergreens/flowers do not require a Modification Request form. Artificial evergreens/flowers
are prohibited. Additionally, a maximum of three pots may be placed in the area of the garage
Hamilton Mill Community Association – Design Guidelines Page 16 of 39 Effective July 30, 2020 Version 8
doors for a two-car garage and four pots for a three-car garage. Flowerpots may only be placed
on the front stoop or porch or on the driveway between garage doors.
Clotheslines Clotheslines of any type are prohibited.
Vegetable Garden Plots A Modification Request form is not required for garden plots if all of the following are met:
a. The plot is located behind the rear line and within the side lines of the house and screened
so as to minimize the visual impact on adjacent properties or from the street;
b. The size of the plot is limited to 150 square feet; and
c. The maximum height of plants, at full growth, is less than four (4’) feet.
All garden plots must be located behind the house and within the sidelines of the house, with the
exception of houses on lots at angles and houses on corner lots. These will be considered on an
individual basis and a Modification Request form must be submitted.
All garden plots must be cleared at the completion of the growing season.
Woodpiles, Air Conditioning Units & Garbage Cans/Recycle Bins Woodpiles and garbage cans/recycle bins must be screened from view from all adjacent
properties and streets. Window air conditioning units are prohibited. All garden hoses when not
in use shall be located or screened so as to conceal from view of neighboring lots or streets.
Each homeowner must make an attempt to conceal hoses from view.
RECREATION EQUIPMENT
Spa & Hot Tubs • All spas and hot tubs require a Modification Request Form.
• A building permit is required.
• Spas must meet all County and State regulations and codes.
• A cover must be in place at all times when not in use.
Every attempt shall be made to conceal the spa or hot tub from view of neighboring lots and
streets, utilizing appropriate landscaping, lattice work, etc. Plans for screening shall be part of
the Modification Request Form. Spas & hot tubs shall be located directly behind the house with the edge of the water no closer to
the property line than 20 feet. All equipment must be within the fence, which also must be
approved. All equipment must be a minimum of 10 feet off the property lines and located and
screened so as not to be a nuisance. Above ground pools and inflatable bubbles are prohibited.
Hamilton Mill Community Association – Design Guidelines Page 17 of 39 Effective July 30, 2020 Version 8
In-Ground Pools This guideline represents minimum requirements. Compliance with all governing building codes
and regulation is also required.
• Pools should be located directly behind the house with the edge of the water no closer to
the property line than 10 feet.
• In ground pools must meet all County and State regulations and codes and must be built
to APSP specifications.
• All Drawings, Specifications, and Data shall be prepared by a Pool Building Professional.
• A Modification Request Form must be submitted for all in ground pools appearance,
height, and detailing of all retaining walls must be consistent with the architectural
standards of the house. Some terracing is acceptable. Glaring light sources, which can be
seen from neighboring lots may not be used.
All equipment must be within the fence (unless specifically otherwise approved), which also
must be approved. Pool equipment must be a minimum of 10 feet off the property lines and
located and screened so as not to be a nuisance. Above ground pools and inflatable bubbles
are prohibited.
Above Ground Pools Above ground pools are prohibited.
Play Houses/Tree Houses A Modification Request form must be submitted for all play houses. Tree houses are not
permitted. The following guidelines apply:
a. Play houses must be located where they will have minimum visual impact on adjacent
properties.
b. Unless otherwise approved, the design of the play house must match the design of the
home.
c. In most cases, materials used must match existing materials of the home.
d. Play houses may not be larger than 100 square feet and a maximum of 8 feet in total
height.
Note: Play houses, once approved, must be maintained to preserve the approved décor.
Play Equipment A Modification Request Form must be submitted for all play equipment. The following
guidelines apply:
a. The play equipment shall be located in the rear yard and within the extended sidelines of
the house;
b. The play equipment shall be located within a screened fence area of the rear of the house,
located a minimum of 10’ off all property lines and screened from view from the street.
Hamilton Mill Community Association – Design Guidelines Page 18 of 39 Effective July 30, 2020 Version 8
c. The play equipment shall be sized and located such that it will have minimal impact on
adjacent properties.
All play equipment, exclusive of wearing surfaces (slide poles, climbing rungs, swing seats, etc.)
will generally be required to be painted or stained to blend into the surrounding environment
(earth tone colors, such as dark green or brown). Metal playsets are prohibited. Roofs to be dark
green canvas or natural wood. All play equipment shall be maintained neatly (kept painted,
stained, etc.).
Skateboarding ramps, baseball backstops, batting cages and similar items may be erected only
when in use, outside the extended sidelines of the house. When not in use, they must be hidden
from view from the street. In addition, if such items are used in the street, they must be removed
when not in use.
Basketball Goals A Modification Request Form must be submitted for Basketball Goals. Basketball Goals must
be mounted on a clear backboard with black trim and a black pole. Normally locations will be
approved only if behind the front corners of the house. Basketball goals must be maintained in
good order.
Tennis Courts/Sport Courts Tennis or sport courts may be permitted on lots where they will naturally fit into the topography
and within all building setbacks and easements, and at a minimum of 20’ from side property
lines, and 30’ from the rear property line. Court lighting is prohibited and landscape screening
may be required.
MISCELLANEOUS ITEMS
Dog Houses A modification request form must be submitted for all doghouses. All doghouses must be
located where they will have minimum visual impact on adjacent properties or from the street.
Construction type, size, and exterior colors/materials will be specific criteria governing approval.
Pet Management No pet is allowed off a homeowner’s property without a leash that has a person attached to it.
This is a Gwinnett County Ordinance. Conflicts in regard to loose or stray animals shall be
directed to Gwinnett County Animal Control at 770-339-3200.
Prolonged barking by dogs can become a nuisance. This should be handled through Gwinnett
County Animal Control at 770-339-3200.
As a courtesy to neighbors, pet owners are responsible for cleaning up their pet droppings while
walking them in common areas, in the County rights of way, or on other homeowners property.
Any conflicts are to be resolved by involved homeowners or Gwinnett County Animal Control.
Hamilton Mill Community Association – Design Guidelines Page 19 of 39 Effective July 30, 2020 Version 8
Parking • Homeowners are encouraged to keep vehicles in their garage and are requested to keep
garage doors closed as much as possible when not in use.
• No vehicle may be parked on any yard.
• Parking of vehicles on the street is governed by Gwinnett County, but discouraged by
Hamilton Mill. Dangerous or unlawful street parking should be reported to the Gwinnett
County PD at 770-513-5100.
• No school bus, truck or commercial vehicle, house trailer, mobile home, motor home, RV,
camper, habitable motor vehicle of any kind, boat or boat trailer, trailers of any kind, or like
equipment, shall be permitted to be stored in open view on residential property for longer
than a 24 hour period. Twenty-four hours is considered sufficient time to prepare the vehicle
for storage or trip. The purpose of this guideline is to assure that the above vehicles will not
be parked or stored in open view on residential property on a regular basis.
• Commercial vehicles regularly driven by a resident shall be parked in the garage when not in
use. All passenger vehicles parked in open view and not in a garage must be operable,
licensed, may not be unsightly, and must be driven on a regular basis. No vehicle
maintenance may be performed in driveways or open garages. Stored vehicles (those not
driven in any 72 hour period) should be parked in a closed garage, or off-site.
Front Porches/Stoops A front porch is defined as an entry area that is fully covered by a roof and is larger than
4’x6’
Benches and chairs are permitted on front porches. They are not permitted on front stoops.
A stoop is a front entry area that is not covered by a roof and is equal to or smaller than
4’x6’
Furniture placed on front porches shall be of high quality, such as wood, wrought iron, or wicker,
and colors and styles shall compliment the house. Plastic or folding furniture is prohibited.
Storage and Garden Sheds Detached storage and garden sheds are prohibited. As with all exterior changes, all others require
prior approval.
Holiday Decorations Exterior Christmas Decorations may be installed beginning November 1st. Lights may be turned
on and displayed the Monday of Thanksgiving week and must be removed by January 10.
Halloween decorations may be displayed the month of October and removed by November 2nd.
For all other Holidays, all decorations, including flags, may be displayed one week before the
holiday and must be removed no later than one week after the holiday.
Flags The flag of the United States, not exceeding 3’ x 5’ in size, may be displayed on a flag holder on
the exterior of a Unit in accordance with the Freedom to Display the American Flag Act of 2005,
4 U.S.C. § 5 (“Flag Act”), and this display guideline. A United States Military Service Flag, not
exceeding 3’ x 5’ in size and authorized by the Department of Defense, may also be displayed on
Hamilton Mill Community Association – Design Guidelines Page 20 of 39 Effective July 30, 2020 Version 8
a flag holder on the exterior of a Unit subject to this display guideline. A Modification Request
Form is not required to be submitted to display either such flag of the United States or U.S.
Military Service Flag on a flag holder attached to the front of the dwelling or to the side of the
dwelling where the garage doors are located, as long as the display is in accordance with the Flag
Act. No flag shall be displayed in a manner inconsistent with any provision of the Flag Act or
any applicable law.
For Sport/School/Seasonal Flag:
One sport or school team flag or seasonal flag (no larger than 3’ x 5’) may be displayed on a Unit
from a single flag holder attached to the front of the dwelling or the side of the dwelling where
the garage doors are located. A Modification Request Form is not required to be submitted to
display a single sport, school or seasonal flag on the exterior of a Unit in accordance with this
guideline.
Except as provided in these guidelines, any other or additional proposed flag may not be placed
on the exterior of a Unit without submission of a Modification Request Form and the prior
written approval of the Modifications Committee.
Signage In accordance with Declaration, no sign may be erected on any lot without prior written
Modification Committee approval except for:
a. Signs required for legal proceedings
b. One “For Sale” or “For Lease” sign per lot, meeting the required sign guideline is
allowed. The Sign Guideline is attached to this document. An unapproved “For Sale” or
“For Lease” sign placed on a lot will be subject to a $100 fine. Following the 5th day, an
additional $25 per day fine will be applied to the account.
c. One burglar alarm yard sign per lot provided such sign is in good condition and has a
surface area of less than 6 x 6 square inches.
d. One Open House sign will be permitted at the entrance to the neighborhood section
where a home is being sold during the hours of 8:00 am through 5:00 pm Saturday and
Sunday. Multiple signs are not permitted and will result in a $25 fine per sign
e. Garage sale signs will be permitted on the lot on which the sale is taking place during the
hours of 5:00 pm Thursday through 5:00 pm Sunday. One free standing directional sign
may be placed at the neighborhood entrance on the morning of the sale and must be
removed at the end of the sale. Signs may not be larger than 18”x24”. Signage may not
be attached to any street sign posts or light posts.
f. Political signs (a maximum of two signs, but no more than one per candidate), not more
than 18”x24” may be displayed on properties no earlier than two weeks prior to any
election and must be removed no later than the day after the election. Political signs may
Hamilton Mill Community Association – Design Guidelines Page 21 of 39 Effective July 30, 2020 Version 8
only be displayed in front yards. Signs may not be attached to mailboxes, light poles,
fences, or placed in any easements or in right of way.
Signs not meeting the above criteria must be first approved by the Modification Committee.
Signage posted in the Area of Common Responsibility not in compliance with this guideline will
be removed and the homeowner posting the sign will be charged a $25.00 per sign and/or sign
hardware removal fee. Signs removed by the Association will be disposed of immediately.
Spirit Signs Spirit Signs and Banners such as for Mill Creek or any other seasonal team sport, such as soccer,
baseball, etc. may be displayed on the day of the event, but not on a permanent basis. These
signs shall not exceed four square feet. No signs may be installed in the County Right of Way,
on the entry monuments or in Association landscaping. Any damage to landscaping or irrigation
will be billed to the Lot owner. Graduation banners may be displayed on your lot throughout the
month of May. Group Graduation banners must follow the procedures outlined in the Graduation
Banner Policy. All other spirit signs require submission of a Modification Request Form.
Signage posted in the Area of Common Responsibility not in compliance with this guideline will
be removed and the homeowner posting the sign will be charged a $25.00, or the actual cost of
removal, whichever amount is higher, per sign or sign hardware removal fee.
Acceptable Antennae/Satellite Dishes DBS and MMDS antennas one meter or less in diameter and television broadcast antennas may
only be installed accordance with the Federal Communication Commission (FCC) rules, and
such items shall be installed in the least conspicuous location which permits reception of an
acceptable signal. A completed Notification Form for the Installation of DBS or MMDS
Satellite Dish or Antenna shall be completed and submitted for all antennae. The following
locations, in order of priority, are where such items should be installed:
a) On the ground behind the main structure so the antenna is not visible from the street. The
antenna shall be shielded to extent practical by low growing shrubs.
b) Under cornice on the rear of the main structure so the antenna is not visible from the
street.
c) On the roof on the rear of the main structure so that the entire antenna is both below the
highest point on the section of the roof that it is mounted and not visible from the street.
d) On the side of the main structure least visible from the street. Mount as close to the rear
of the main structure as possible. If both sides are equally visible, then the side from
which the least traffic is likely to flow is defined as the least visible. The antenna should
be shielded to the extent practical by low growing shrubs.
e) Under the cornice on the side of the main structure least visible from the street. Mount as
close to the rear of the main structure as possible. If both sides are equally visible, then
the side from which the least traffic is likely to flow is defined as the least visible.
LANDSCAPE GUIDELINES
Hamilton Mill Community Association – Design Guidelines Page 22 of 39 Effective July 30, 2020 Version 8
Landscaping: With the exception of natural or undisturbed areas, front and side yards must be
sodded with Bermuda grass, while the rear yard may be seeded fescue or zoysia (golf course/lake
lots are required to be sodded with Bermuda on all 4 sides), unless otherwise approved by the
Modification Committee. Any grasses other than that approved are weeds and must be treated,
removed and prevented from recurring. Integrally designed planting beds with natural ground
cover shall be considered as natural areas. Foundation plantings along all street-facing
elevations are to be a minimum 3 gallon size plants for lower growing varieties, and a minimum
7 gallon size plants for larger growing varieties. Corner plants should be a minimum of 5-6 feet
in height. Trees must be a minimum of 2” diameter at the time of planting. The Modification
Committee may require evergreens for screening on side entries. Artificial vegetation of any
type is prohibited.
Trees: Applications for the removal of trees that are diseased, dead or a safety concern will be
escalated with pictures. All tree removal must be submitted and approved. Removal will be
considered in some cases due to overcrowding, root exposure, and dead grass. Any trees
removed must be replaced with trees and or new approved landscaping. Clear cutting of any lot
is prohibited.
.
Mulching: All landscape beds must be covered with suitable mulch such as pine-straw, chopped
pine bark mulch, wood mulch, etc. Rock, stone or pebbles are not considered suitable mulch and
are not permitted.
Edging: The preferred landscape bed edging is a neat cut trench. Other edging, if used, must be
flush with the ground and not be visible from the street. If visible edging/retaining edging is
requested, the exact color and material as the façade of the home/water table is recommended by
the Modification Committee. Any edging must be maintained evenly spaced, level and without
cracks, chips or missing pieces. Edging that is not maintained to this standard is required to be
repaired or removed. Visible plastic edging of any design is prohibited.
Landscaping Standards:
a. Each owner shall keep their lot and all improvements thereon in good order and repair,
including, but not limited to, seeding, watering, fertilizing, regularly mowing grass,
edging, controlling weeds, and pruning of trees and shrubbery.
b. Each owner is responsible for removal of debris, weeds, clippings, etc from the property
line to the center of the adjacent street. All planting areas shall be properly maintained at
all time, after the first frost, all affected material shall be removed. The bare earth in
landscape beds shall be covered with appropriate mulch to prevent erosion.
c. The planting and/or other appropriate external care of all building, fences, and
improvement shall be done in a manner with such frequency as is consistent with good
property management and the precedent set in the surrounding community.
d. Yard equipment stored outside the home must not be visible from streets and neighboring
properties.
e. A Modification Request Form must be submitted for screen planting and property line
planting. Requests must include a description of the types and sizes of trees or shrubs to
be planted and a site plan showing the relationship of the plantings to the house and
Hamilton Mill Community Association – Design Guidelines Page 23 of 39 Effective July 30, 2020 Version 8
adjacent dwellings. No fence, wall, hedge, or shrub planting shall be placed or permitted
to remain where it could create a sight problem for traffic on the road or at intersections.
Landscape Beds/Trees/Bushes a. Landscape Beds shall be maintained regularly with fresh pine straw or mulch, regularly
mowed edged and weeded. All turf shall be regularly mowed, edged and kept free of
weeds. Shrubs and ornamental trees shall be kept pruned.
b. Landscaping shall relate to the existing terrain and natural features of the lot utilizing
plant materials in harmony with the Community Wide Standard.
c. Landscaping walls require Modification committee approval.
MAINTENANCE RULES AND REGULATIONS
Exterior Maintenance Exterior surfaces such as walls, roofs, windows, and doors must be maintained in sound
condition, for example, free from holes, loose and rotting materials, peeling and chipping paint,
and broken windows and doors. Other exterior surfaces including decks, porches, balconies,
fences, and walls must be maintained in good condition and structurally sound. Violations will
be enforced under the Board’s power to require owners to maintain under the Declaration.
Acceptable Storm Water Control Practices Grading of all lots shall, as much as possible given the natural contour of the lot, force all water
to the street or into established drainage systems, changes to grading or to a structure’s gutter and
downspout system shall not force water on to any other lot or increase the flow of water
previously flowing on the lot. Drainage disputes should be directed to Gwinnett County Storm
Water Department. Soil erosion shall be controlled.
Acceptable Landscaping Maintenance Practices Landscaping shall be designed and installed so that it complements existing landscaping on the
lot and on nearby lots. Lots at intersections of two or more streets and lots on curves in streets
shall not have landscaping that impairs the ability of drivers and pedestrians to see each other.
Lot owners must keep landscaping (including tree branches) clear of sidewalks, street signs and
street lights. Installation of aggressive spreading plant species at or near the property lines is
prohibited.
a. Mowing: All turf shall be mowed routinely to maintain a manicured appearance.
Clippings (if minimal) should be blown back into the turf as mulch or bagged and
properly disposed of. Clippings may not be left on streets, sidewalks or driveways and
may not be blown into storm sewers.
b. Weed control: Turf must be kept free from invasive grasses and weeds year-round.
Concrete surfaces, including the joint between curb and street, should be kept free from
weeds.
c. Pruning: Shrubs and ornamental trees must be regularly pruned to prevent overgrowth
and new growth “shoots”. Shrubs in front of the home should not be allowed to grow
taller than the lower window sill. Dead/dormant ornamentals should be removed.
Hamilton Mill Community Association – Design Guidelines Page 24 of 39 Effective July 30, 2020 Version 8
d. Mulching: All landscape beds must be covered with suitable mulch pinestraw, chopped
pine bark mulch, wood mulch, etc. Rock, stone or pebbles are not considered suitable
mulch and are not permitted.
e. Edging: The preferred landscape bed edging is a neat cut trench. Mailbox posts,
landscape beds, sidewalks, curbs and driveways shall be routinely edged to prevent long
grass and “runners” and to give clear delineation.
Debris Garbage cans shall be stored where they are not visible from the street and neighboring
properties other than on applicable trash pick-up dates and shall be returned to proper storage
within 24 hours of scheduled pick-up. Barbecue grills, wheelbarrows, lawn maintenance
equipment or tools shall be properly stored and not visible from the street unless currently being
used. Debris of any sort (including appliances, building materials, rubbish equipment,
merchandise, and trash) is considered as prohibited outdoor storage by Gwinnett County
Planning and Development Property Maintenance Ordinances. These items must be kept within
a wholly enclosed building. Wholly enclosed buildings do not include porches or garages left
open. Firewood must be stored out of view from the street.
Basketball Goal Maintenance As a condition for approval, all basketball goals shall be maintained so they are safe to use and
present a neat appearance. Rust shall be promptly eliminated and broken or missing components
shall be promptly replaced.
Mail Box and Post Maintenance As a condition to approve of a mailbox, the requesting homeowner and all successors to the
homeowner’s property shall be responsible for the prompt and proper repair and maintenance for
the original mailbox, house numbers and posts.
LAKE MULBERRY REGULATIONS & RESTRICTIONS
Maintenance of the Lake and the Lake edge: • Declarant has reserved a perpetual easement for the benefit of the HOA across portions of
the Lake and the Lake edge necessary to allow for the maintenance required under the
Covenants, including, without limitation, the maintenance of a lake(s), lakebed(s), dam(s)
and shoreline(s) which are within Hamilton Mill. These maintenance areas are shown as
easements or common area on recorded plats containing portions of the Lake and
surrounding areas. Such maintenance shall be performed with a minimum of interference
to the quiet enjoyment to Lots, reasonable steps shall be taken to protect such property,
and damage shall be repaired by the person or entity causing the damage at its own
expense. In order to allow the exercise of the rights created pursuant to this easement
concerning the maintenance of the Lake, no tree or structure may be placed within fifteen
(15) feet of the line formed by the highest normal pool elevation of the Lake without the
prior written approval of the HOA or its designee, the Modifications Committee. Nothing
in the Covenants or any recorded plat for any portion of the Community shall be
construed to create any pedestrian path or walkway around any lake.
Hamilton Mill Community Association – Design Guidelines Page 25 of 39 Effective July 30, 2020 Version 8
Withdrawing water from the Lake:
• No water may be withdrawn from the Lake for any purpose by anyone other than the
HOA or the Hamilton Mill Golf Course.
The following activities are prohibited within, on, or around the Lake unless expressly
authorized by, and then subject to such conditions as may be imposed by the HOA:
• Any activity which violates local, state or federal laws or regulations; however, the Board
shall have no obligation to take enforcement action in the event of a violation.
• Swimming, sail boarding, tubing, ice skating or any other activity in which a person is
required for some or most of their body to be in the water.
• Dumping of grass clippings, leaves or other debris, petroleum products, fertilizer, or other
potentially hazardous or toxic substances or pollutant in any drainage ditch, stream, or
pond that feeds the Lake or the Lake itself, except that fertilizers may be applied to
landscaping on Lots provided care is taken to minimize runoff.
• Any activities which materially disturb or destroy the vegetation, wildlife, wetlands, water
or air quality within Hamilton Mill.
• Any noxious or offensive activity which in the reasonable determination of the HOA
tends to cause embarrassment, annoyance, or nuisance to Owners of Lake Lots or Users of
the Lake.
• Sprinkler or irrigation systems or wells of any type which draw upon water from the Lake,
except that the HOA and the Hamilton Mill Golf Course shall have the right to draw water
from the Lake.
• The storage of any watercraft on the Lake, or within the maintenance easement along the
Lake shoreline or any other Hamilton Mill Community Association property when not in
use. Lake Lot Owners may store their personal craft on their property in a location with
the appropriate screening as determined by the Modifications Committee.
• The construction or placement of any docks on the Lake or a Lake Lot.
• Retaining walls, sea walls and similar structures.
Landscaping:
• No Person shall plant any of the following on the Lake’s edge: any genus of Water
Lilies (Nuphar, Nymphaea, Nelumbo & Brasenia), water hyacinth (Eichhornia),
Duckweed or Watermeal (Lemna) Water Lettuce (Pistia), Watermilfoil (Myriophyllum),
Coontail (Ceratophyllum) Pondweed (Potomogeton), Hydrilla, Elodea, Cattail (Typha)
and Spikerush (Eleocharis). These plants act like kudzu and can’t be stopped from over
growth. Planting water Iris, Pickerelweed (Pontederia) or Arrowhead (Sagittaria) is
acceptable.
Exhibit “A”
FENCE GUIDELINES
APPROVED FENCE TYPES AND SPECIFICATIONS BY SUB-NEIGHBORHOOD:
Hamilton Mill Community Association – Design Guidelines Page 26 of 39 Effective July 30, 2020 Version 8
Millwater Crossing, Fairway Bend, Highpoint & Parkside: (Interior)-Type 3, Type 4, Type 5
or Type 6 with wrought iron; to match connecting fence or (Type 7 only on interior lots NOT
adjacent to any road or parkway). (Golf) - Type 5 or Type 6 with wrought iron not within the
golf course setback unless otherwise specifically approved in writing. (Along parkways or
roads) Type 3 with spaced pickets only, no solid “privacy” fences. Height may be either 4 or 5
feet depending to adjoining fence and NCC requirements for specific lots.
Fairpointe, Brookside, HillGrove, AsheBrooke, WindRidge, Grove Park & Laurel Ridge:
Type 3, Type 4, Type 5 or Type 6 with wrought iron 5 foot high or (Type 7 only on interior lots
NOT adjacent to any road or parkway). (Along parkways or roads) Type 3 with spaced pickets
only, no solid “privacy” fences.
WoodLawn & TreyByrne: (Interior)-Type 3, Type 4, Type 5 or Type 6 with wrought iron; 5
foot high or (Type 7 only on interior lots NOT adjacent to any road or parkway). (Golf) - Type 5
or Type 6 with wrought iron - 5 foot high and not within the golf course setback unless otherwise
specifically approved in writing. (Along parkways or roads) Type 3 with spaced pickets only, no
solid “privacy” fences. (Along the common area behind lots 42TT – 53TT) Type 5 at 4 foot high
and the fence must be along the rear property line or the edge of the sanitary sewer easement
which ever is closer to the house)
StoneWood, Lake Forest, RidgeBrooke, WoodLeaf, Oakbrooke & HuntField: (Interior)-
Type 3, Type 4, Type 5 or Type 6 with wrought iron, 5 foot high or (Type 7 only on interior lots
NOT adjacent to any road or parkway). (Golf) - Type 5 or Type 6 with wrought iron - 5 foot
high and not within the golf course setback unless otherwise specifically approved in writing.
(Lake) - Type 5 at 4 foot high only in location shown herein along the lake. (Along parkways or
roads) Type 3 with spaced pickets only, no solid “privacy” fences.
Lakeside: (Interior)-Type 3, Type 4, Type 5 or Type 6 with wrought iron, 5 foot high or (Type 7
only on interior lots NOT adjacent to any road or parkway). (Lake) - Type 5 at 4 foot high only
and in the location shown herein along the lake.
Greenside & GlenAire: (Interior)-Type 3, Type 4, Type 5 or Type 6 with wrought iron 5 foot
high or (Type 7 only on interior lots NOT adjacent to any road or parkway). (Golf) - Type 5 or
Type 6 with wrought iron - 5 foot high, unless otherwise specifically approved in writing and not
within the golf course setback unless otherwise specifically approved in writing. (Along
parkways or roads) Type 3 with spaced pickets only, no solid “privacy” fences.
The Coventry & Town Manor: - Type 5 or Type 6 with wrought iron - 5 foot high and not
within the golf course setback unless otherwise specifically approved in writing.
Cambridge: - Type 5 or Type 6 with wrought iron - 5 foot high and not within the golf course
setback unless otherwise specifically approved in writing. The fence along the property lines of
lots 15 - 22 ,24 - 28 & 37 - 39 that border the boundary of Hamilton Mill shall be a Type 1a
fence and shall be stained and maintained in one color and must be approved by the Association
any time the fence is stained or painted.
Fence locations are generally approved to be to the rear of the house and to the property lines or
directly behind the house. Exceptions to this guideline may be made to avoid meters, air
conditioning equipment, trees, and severe slopes and to enclose basement doors. Corner lot
fences in the street side yard shall be no closer to the street than the building line and must
originate from the rear corners of the house. Fences are not allowed in buffers or landscape
easements. There is a 20’-30’ No Fence Easement (check your survey for exact easement) on
lots adjacent to a road or parkway along the property line adjacent to the road or parkway
Hamilton Mill Community Association – Design Guidelines Page 27 of 39 Effective July 30, 2020 Version 8
rightof-way. There is a 20’ fence setback on all golf course lots and as such fences should not be
built within 20’ feet of any property line adjacent to the golf course unless specifically approved
otherwise in writing. In those cases where fences are required and approved by the NCC or MC
to be closer to the golf course, provisions for ball retrieval must be made. Freestanding dog
pens are prohibited All fence locations and types must be specifically approved and built only in
the approved locations. Along parkway and roads, privacy fence must be the same as what was
installed by the developer and/or builder.
Please note the existence of a fence that does not meet the guidelines does not mean that the
same type of construction or installation will be approved for another lot.
Hamilton Mill Community Association – Design Guidelines Page 28 of 39 Effective July 9, 2017 Version 5
WOOD ONLY. NO COMPOSITE OR PLASTIC
Exhibit “A” Fence
Guidelines
Type 3
4x4 POST W/ APPLIED French Gothic FINIAL
Hamilton Mill Community Association – Design Guidelines Page 29 of 39 Effective July 9, 2017 Version 5
2X4 RAIL
1X4 PICKETTS spaced 1.25” – 1.75” apart
WOOD ONLY. NO COMPOSITE OR PLASTIC
Exhibit “A” Fence
Guidelines
Hamilton Mill Community Association – Design Guidelines Page 30 of 39 Effective July 9, 2017 Version 5
Type 5
Water, Golf or any High Profile lot fencing
Type 6
Exhibit “A” Fence
Guidelines
Wrought Iron, aluminum or steel post & fence, flat or spear top pickets.
8 ’ – 0 ” Max
Hamilton Mill Community Association – Design Guidelines Page 31 of 39 Effective July 9, 2017 Version 5
Type 7
WOOD ONLY. NO COMPOSITE OR PLASTIC
Exhibit “A”
Fence Guidelines
Hamilton Mill Community Association – Design Guidelines Page 32 of 39 Effective July 9, 2017 Version 5
Hamilton Mill Community Association – Design Guidelines Page 33 of 39 Effective July 9, 2017 Version 5
Sign Guideline
All “For Sale” and “For Lease” signs must meet the community-wide
standard below. All homes listed after September 1, 2007 are required to use
Exhibit “A”
Fence Guidelines
Hamilton Mill Community Association – Design Guidelines Page 34 of 39 Effective July 9, 2017 Version 5
the new standard, and all existing “For Sale” and “For Lease” signs must
comply by January 1, 2008.
For Sale/Lease Post Requirement
Hamilton Mill Community Association – Design Guidelines Page 35 of 39 Effective July 9, 2017 Version 5
Hamilton Mill Community Association – Design Guidelines Page 36 of 39 Effective July 9, 2017 Version 5
NOTIFICATION FORM FOR THE INSTALLATION OF DBS OR MMDS SATELLITE
DISH OR ANTENNA
NOTE: This form must be completed and returned prior to installation. Installation in a location that does not
comply with the Design Guidelines requires N.C.C. and/or M.C. approval.
TO: N.C.C. AND/OR M.C. ______________________________________ Date Received: _________________________ ______________________________________
FROM: Owner’s Name: _____________________________________________________ Address: _____________________________________________________ _____________________________________________________ Phone (home): _____________________________________________________
Phone (work): _____________________________________________________
1. Type of satellite dish or antenna to be installed:
____ DBS satellite dish 1 meter or smaller (e.g., Primestar, Dish network, Direct TV)
____ MMDS antenna (wireless cable) 1 meter or smaller (e.g. WANTV)
2. Installation will include a mast __________ No ____________Yes If yes, total height of system, including mast
is __________ inches.
3. Installation of the dish or antenna will be done by:
_______________________________________________________________________________
4. Does the location of the dish or antenna comply with the design guidelines? ____ Yes ____ No.
Describe on a separate/attached sheet of paper the exact location of the satellite dish or antenna and attach a diagram or
drawing of the location. If the satellite dish or antenna is not to be installed in a location that complies with the
design guidelines, you must provide specific, written documentation as to why the pre-approved location is not
acceptable and obtain N.C.C. AND/OR M.C. approval of the proposed alternate location.
I acknowledge that I have read, understand and have complied with or will comply at all times with the Design Guidelines
with respect to the installation of satellite dishes and antennas.
Signature _______________________________________Date: _________________________
Hamilton Mill Community Association – Design Guidelines Page 37 of 39 Effective July 9, 2017 Version 5
Design Guidelines Page 33 of 35
REQUEST FOR MODIFICATION REVIEW
NAME: __________________________________________ DATE: _____________________
ADDRESS: _______________________________________ PHONE: _______________________________________
CITY/ZIP: ________________________________________ CELL PHONE: __________________________________
COMMUNITY: ____________________________________ EMAIL ADDRESS: ______________________________
Please provide the M.C. with all the information necessary to evaluate the request thoroughly and quickly.
Requests must include, without limitation, the following information: site plan (including all dimensions), detailed description of
request, list of materials, pictures (if applicable), and any other information as specifically required below or as required by the
Covenants/Guidelines approved for the community.
DESCRIPTION OF MODIFICATION REQUESTED: ____________________________________________________________________________________________________________ ____________________________________________________________________________________________________________ _________________________________________________________________________________________
ESTIMATED START DATE: _____________________ ESTIMATED COMPLETION DATE: ________________
Under each of the most common headings below, all the items listed must be submitted. Please refer to the Guidelines for other
necessary information required for modification such as detached structures, outdoor play equipment, pools, etc.:
Hamilton Mill Community Association – Design Guidelines Page 38 of 39 Effective July 9, 2017 Version 5
_ PATIO or WALKWAY _ Lot survey denoting location _ List of materials to be used _ EXTERIOR DECORATIVE OBJECTS, LIGHTING, ETC _ Description of object _ Location and picture or sketch of object _ GARDEN PLOT/LANDSCAPING _ Location and size of garden _ Type of plants to be grown _ PLAY HOUSES / PLAY EQUIPMENT / HOT TUBS _ Location (Must have minimum visual impact on adjacent properties) _ Size and sketch _ Materials (In most cases, material used must match existing materials of
home) _ PRIVATE POOL / TENNIS COURT _ Picture or drawing of pool / court type _ Dimensions _ Site plan denoting location _ Type of lighting source _ Landscape plan _ FENCING _ Picture or drawing of fence type (with dimensions) _ Color (must be natural if wood) _ Site plan denoting location. On corner lot, fence may not be closer to side
street than building line of house. (Please use copy of survey from your
closing package) _ Crossbeam structure must not be visible from any street or adjacent
properties. (Must face inside toward your making the outside the finished side) _BASKETBALL GOAL (Permanent or Portable) _Picture or description of goal _Site plan or drawing denoting location
_Materials (Must be cedar, redwood or pressure treated pine)
_ If fence is solid privacy type, all posts shall be anchored in concrete _ REMOVAL OF TREES _ Site plan denoting location _ List of how many and what types of trees are to be removed _ Explanation of why you wish to remove the trees _ DECK / PORCH _ Picture or drawing (Deck must match any existing deck) _ Dimensions _ Site plan denoting location (In most cases may not extend past
sides of home) _ Materials (Must be cedar, redwood or pressure treated pine) _
EXTERIOR PAINTING (Only necessary if changing original
colors) _ Paint color (swatch) _ Area of home to be repainted _ Photograph of your home plus homes on either side (In most cases, adjacent homes may not be painted the same colors) _ STORM WINDOWS / DOORS _ Picture depicting type of storm window/door to be installed)
_ Picture indicating which windows/doors will be replaced by the
storm windows/doors _ Color (window/door trim must be baked enamel and color must
be compatible with primary and trim colors) _ BUILDING ADDITIONS _ Location of addition on site plan _ Size, color, and detailed architectural drawing of addition _ Materials (Material used must match existing materials on home) _ Building permit (If required) _OTHER _Complete description/photographs/brochures/material list of
proposed alteration or addition, including a site plan denoting location (for additions)
Design Guidelines Page 34 of 35 Effective July 9, 2012 Version 4 I understand and agree that no work on this request shall commence until written approval of the N.C.C. and/or M.C. has been
received by me. I represent and warrant that the requested changes strictly conform to the community Covenants/Guidelines and that
these changes shall be made in strict conformance with the Covenants/Guidelines. I understand that I am responsible for complying
with all city and county regulations.
Neither the Association Board of Directors, the Association Advisory Committee or the Association N.C.C. and/or M.C. nor their
respective members, successors, assigns, agents, representatives or employees shall be liable for damages or otherwise to anyone
requesting approval of an architectural alteration by reason of mistake in judgment, negligence, or non-feasance, arising out of any
action with respect to any submission. The architectural review is directed toward review and approval of site planning, appearance
and aesthetics. None of the foregoing assume any responsibility regarding design or construction, including, without limitation, the
structural integrity, mechanical or electrical design, methods of construction, or technical suitability of materials. I hereby release and
covenant not to sue all of the foregoing from/for any claims or damages regarding this request or the approval or denial thereof.
HOMEOWNER SIGNATURE: ______________________________________________ DATE: __________________
Mail to: Hamilton Mill Management Office, 1669 Hamilton Mill Parkway, Dacula, GA
30019 or email to [email protected] ----------------------------------------------------------------------------------------------------------------- ----------------------------------------
FOR M.C. USE -
Hamilton Mill Community Association – Design Guidelines Page 39 of 39 Effective July 9, 2017 Version 5
DATE RECEIVED: __________________
REVIEWED BY: __________________
APPROVED: __________________ DATE: __________________
NOT APPROVED: __________________ DATE: __________________
APPROVED W/ CONDITIONS: ________ DATE: __________________
CONDITIONS:
______________________________________________________________________________________________________
______________________________________________________________________________________________________
______________________________________________________________________________________________________
______________________________________________________________________________________________________
______________________________________________________________________________________________________
______________________________________________________________________________________________________
REVIEWER COMMENTS:
______________________________________________________________________________________________________
______________________________________________________________________________________________________
______________________________________________________________________________________________________
______________________________________________________________________________________________________
______________________________________________________________________________________________________