24.2

01.0

5LM

5OX

24.2

08.0

3LM

5OX

24.2

10.0

1LM

5OX

24.2

01.0

5LM

5

24.2

08.0

3LM

5

24.2

10.0

1LM

5

27.09.2019-E

LANGER M5 Universal Curettesin Handle

zepf-dental.com

27.09.2019-EAll medical devices indicated here bear the CE mark according to the Medical Device Directive 93/42/EEC.

HELMUT ZEPF MEDIZINTECHNIK GMBH · FACTORY FOR DENTAL & SURGICAL INSTRUMENTSObere Hauptstr. 16-22 · 78606 Seitingen-Oberflacht, GermanyTel.: +49 (0) 74 64 / 98 88 -0 · Fax: +49 (0) 74 64 / 98 88 -88 · zepf-dental.com

LANGER M5 Universal Curettesin Handle

M5 Curettes are now also available as M5 Universal Curettes. The new Zepf Langer M5 Universal Curettes are especially qualified for Deep Scaling – to remove con-cretions on the tooth or root surface as well as inflamed tissue simultaneously in one step. As the working tips are sharpened on both sides, M5 Langer Universal Curettes are ideal for very deep pockets in closed periodontal treatments. The 1st shaft is about 3 mm longer and facilitates the access to deep gingival pockets (deeper than 5 mm). The shortened working tip allows a special subgingival curettage for tight and deep pockets and narrow root surfaces. The 0.95 mm thin, flexible and therefore tactile 1st shaft offers an optimal adaptation to deep roots.M5 Universal Curettes are available in two different versions – Standard mirror-finished and black-coated.

The black-coated ZEPF curettes have a durable, very hard surface which is very aggres-sive and sharp-edged due to its crystalline nanostructure.

Due to the unique coating, the surface hardness is in-creased to an unprecedented 4500 Vickers. The cutting edge is thus highly tempered and does not need to be re-sharpened after each curettage. The black, scratch-re-sistant surface is easy to clean and prevents unpleasant light reflections.

As usual, the instrument tips are interchangeable due to the M4 x 0.5 mm thread.

24.201.05LM5 Langer # 5/6 M5, approx. 3 mm longer 1st shaft, Ø 0.95 mm, in handle yellow, inserts exchangeable, for anterior teeth

24.201.05LM5OX Langer # 5/6 M5, with coating

24.210.01LM5 Langer # 1/2 M5, approx. 3 mm longer 1st shaft, Ø 0.95 mm, in handle black, inserts exchangeable, for lower molars and premolars

24.210.01LM5OX Langer # 1/2 M5, with coating

24.208.03LM5 Langer # 3/4 M5, approx. 3 mm longer 1st shaft, Ø 0.95 mm, in handle yellow-green, inserts exchangeable, for upper molars and premolars

24.208.03LM5OX Langer # 3/4 M5, with coating