large and medium-size externalsynthes.vo.llnwd.net/o16/mobile/synthes...
TRANSCRIPT
-
Large and Medium-Size ExternalFixators. Modular rod systems.
Surgical technique
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite U1
-
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite U2
-
1
System description 4
Indications and contraindications 5
Fixation components for the large external fixator 6
Fixation components for the medium-size external fixator 7
Implants 8
Instruments 9
Surgical approaches 13
Setting the Schanz screws 16
Modular frame with the rod-to-rod technique 22
Additional treatment options using the rod-to-rod technique 25
Unilateral frame with single-rod or double-rod construction 30
Pelvic use – supraacetabular assembly 32
Bilateral frame for arthrodesis and osteotomies 38
Bibliography 40
Synthes Large and Medium-Size External Fixators Surgical technique
Table of contents
WarningThis description is not sufficient for immediate application of theinstrumentation. Instruction by a surgeon experienced in handling this instrumentation is highly recommended.
Image intensifier control
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 1
-
2 Synthes Large and Medium-Size External Fixators Surgical technique
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 2
-
3
User-oriented handling– Clamps with a clip-on self-holding mecha-
nism – Color-coded for easy identification– Comprehensible product line
Free frame design– Frames can be freely assembled; no limi ta-
tions from the assembly system– Free pin placement– Modular technique allows rapid and
precise reduction during and after surgery– Radiolucent carbon fibre rods ensure
excellent fracture visualization
Magnetic resonance safe– Enables magnetic resonance examinations
of patients stabilized with External Fixators
Large External Fixator. Allows modularity in all three planes.
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 3
-
4 Synthes Large and Medium-Size External Fixators Surgical technique
The modular construction of Large and Medium-size ExternalFixators makes them highly flexible. A variety of proven forms ofassembly can be used to externally stabilize long, tubular bonesand pelvic ring fractures as well as arthrodesis and osteotomies.
The Synthes system is becoming increasingly popular as a mini-mally-invasive repositioning instrument using the three-rod modular technique. This form of assembly spares soft tissue, iseasy to learn and is recommended as a standard by the Associa-tion for the Study of Internal Fixation (AO), and makes it mucheasier to handle and use the External Fixator.
Additional benefit is provided by the latest clamps, which arealso magnetic resonance safe. Patients with External Fixators canbe reliably diagnosed in magnetic resonance tomograms.
System description
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 4
-
5
Indications
The Large External Fixator (rod diameter: 11 mm) is particularlysuitable for treating the lower extremities. The Medium-size External Fixator (rod diameter: 8 mm) is particularly appropriatefor the extremities of adults, and the upper and lower extrem i-ties of children and small adults.
The most important indications for Large and Medium-size External Fixators are: – Second and third-degree open fractures– Infected pseudoarthrosis– Rapid, initial immobilization of soft tissue injuries and fractures
in severely injured patients– Immobilization of closed fractures with severe soft tissue
trauma (bruising of the soft tissue mantle, burns, skin dis-eases)
– Extensive shaft and periarticular fractures– Transient joint-bridging immobilization in severe soft tissue
and ligament injuries– Certain injuries to the pelvic ring, and selected fractures in
children– Arthrodeses and osteotomies
Indications and contraindications
Contraindications
– Patients who for social and physical reasons are not suitablefor an External Fixator.
– Patients in whom no screws can be inserted due to a bone orsoft tissue disease.
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 5
-
6 Synthes Large and Medium-Size External Fixators Surgical technique
390.002 Multi Pin Clamp, 6 positions, large, MR-safe
390.004 Multi Pin Clamp, 4 positions, large, MR-safe
Fixation components for the LargeExternal Fixator
390.003 Rod Attachment for large Multi-Pin Clamp
390.005 Combination Clamp, clip-on, self-holding,MR-safe
390.007 Rod-to-Rod Clamp, MR-safe
390.008 Clamp, clip-on, self-holding, MR-safe
394.800–870 Carbon Fibre Rod, � 11.0 mm, lengths 100–400 mm
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 6
-
7
390.033 Multi Pin Clamp, 4 positions, medium, MR-safe
390.036 Multi Pin Clamp, 6 positions, medium, MR-safe
Fixation components for theMedium-size External Fixator
390.051 Clamp for External Fixator for Distal Radius,MR-safe
390.031 Combination Clamp, medium, clip-on, self-holding, MR-safe
390.037 Combination Clamp 8.0/11.0, clip-on, self-holding, MR-safe
390.034 Rod Attachment for medium Multi Pin Clamp
390.035 Clamp, medium, clip-on, self holding, MR-safe
395.779–797 Carbon Fibre Rod, � 8.0 mm, lengths 160–400 mm
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 7
-
8 Synthes Large and Medium-Size External Fixators Surgical technique
Fits the Large External Fixator
Seldrill™ Schanz Screws
Titanium Steel Diameter Length(mm) (mm)
494.782–788 294.782–788 5.0 100–250494.792–798 294.792–798 6.0 100–250
Self-Tapping Schanz Screws
Titanium Steel Diameter Length(mm) (mm)
494.520–570 294.520–570 5.0 100–190494.650–680 294.650–680 6.0 100–190
Implants
Fits the medium external fixator
Seldrill™ Schanz Screws
Titanium Steel Diameter Length(mm) (mm)
494.769 294.769 4.0/2.5 80494.771 294.771 4.0/3.0 80494.772 294.772 4.0/3.0 100494.774–779 294.774–779 4.0 60–175
Self-Tapping Schanz Screws
Titanium Steel Diameter Length(mm) (mm)
494.445 294.445 4.0/2.5 80494.300 294.300 4.0/3.0 80494.430–460 294.430–460 4.0 60–125
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 8
-
9
Adapters
Instruments
Protective caps
393.101 Adapter for Seldrill™ Schanz Screw � 4.0 mm
393.103 Adapter for Seldrill™ Schanz Screw � 5.0 mm
393.104 Adapter for Seldrill™ Schanz Screw � 6.0 mm
393.400 Protective Cap for Schanz Screws and Steinmann Pins � 4.0 mm
393.420 Protective Cap for Schanz Screws and Steinmann Pins � 5.0 mm
Combination wrenches
321.160 Combination Wrench � 11.0 mm
321.158 Combination Wrench � 8.0 mm
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 9
-
10 Synthes Large and Medium-Size External Fixators Surgical technique
Drill sleeves
Drill sleeves 6.0 mm (for use with 5.0 mm system)
392.951 Drill Sleeve 8.0/6.0, short, with thread
392.952 Drill Sleeve 8.0/6.0, long, with thread
Drill sleeves 5.0 mm
395.921 Drill Sleeve 6.0/5.0, short, with thread
395.912 Drill Sleeve 5.0/3.5, short
394.181 Trocar � 3.5 mm, short
395.923 Drill Sleeve 6.0/5.0, long, with thread
395.913 Drill Sleeve 5.0/3.5, long
394.182 Trocar � 3.5 mm, long
392.963 Drill Guide Handle, 6 positions
395.911 Handle for Drill Sleeve
Handles for drill sleeves
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 10
-
11
Drill sleeves 4.0 mm
395.922 Drill Sleeve 4.0, with thread
392.955 Drill Sleeve 4.0/2.5
394.183 Trocar � 2.5 mm
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 11
-
12 Synthes Large and Medium-Size External Fixators Surgical technique
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 12
-
13
The Large and Medium-size External Fixators must be affixedwithin safe zones.
The construction may not hinder the approach for a primarywound debridement or for a secondary operation. Skin transplants, sequestrectomies, bone grafting or a later osteo syn-thesis must be performable without restriction.
Surgical approaches
Approach to the tibia
The soft-tissue zone through which Schanz screws can be in-serted without damaging important structures (vessels,nerves, muscles and tendons) is anteromedial to the tibia. Theangles of this safe zone vary.
If the lateral surface of the distal third of the tibia is avoided,damage to the anterior tibial artery can be avoided.
If the ventral zone of the distal tibia is avoided, interference withthe tendons can also be avoided. In addition, this minimizes theprobability of potential pin channel infection.
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 13
-
14 Synthes Large and Medium-Size External Fixators Surgical technique
Approach to the femur
A lateral approach to the femur within a 30° angle is recom-mended. A medial approach is also possible from a distal direc-tion.
Approach to the pelvis
There are two recommended options for pin placement of theexternal fixation assembly in the pelvis.
Supraacetabular pin placementGiven the pronounced bone structure, the more technically diffi-cult supraacetabular pin placement is preferred over that of theiliac crest. Proceeding from the superior anterior crest, the site ofentry is approximately 4–6 cm in a caudal direction, and 3–4 cmin a medial direction. When the patient is in a supine position,the alignment for drilling the screws is angled approximately 20°in a cranial direction and 30° inward.
Iliac crest pin placementTo keep from damaging the femoral cutaneous nerve, avoid in-sertion up to 15 mm in a dorsal direction from the superior anterior iliac spine. The orientation of the os ilium can be deter-mined by palpation with a finger or an additional instrument.The screws are then inserted delicately between the two laminaeof the os ilium.
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 14
-
15
Approach to the humerus
When dealing with the humerus, primary consideration shouldbe given to the radial and axillary nerves. Distally, a dorsal approach to the humerus is appropriate. Proximally, it is recom-mendable to introduce the Schanz screws from a ventrolateraldirection, caudal to the path of the axillary nerve.
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 15
-
16 Synthes Large and Medium-Size External Fixators Surgical technique
The following steps will be explained with reference to a� 5.0 mm self-drilling, self-tapping (Seldrill™) Schanz screw, anda conventional � 5.0 mm Schanz screw inserted in a tibia.
Setting the Schanz screws using theexample of the tibia in the diaphyseal region
Seldrill™ Schanz screw
The Seldrill™ is a self-drilling, self-tapping Schanz screw. The opti-mized radial preloading helps minimize the rate of pin infections.
Note: When the new adaptors for Schanz screws are used, theSeldrill™ Schanz screws do not have to be clamped in thedrill chuck. The adapters are compatible with the universal chuckand AO/ASIF Quick Coupling.
1Set the drill sleeves on the bone
Required instruments
Handle for Drill Sleeve 395.911
Drill Sleeve 6.0/5.0 short, with thread 395.921
Drill Sleeve 5.0/3.5, short 395.912
Trocar � 3.5 mm, short 394.181
Insert the drill sleeve assembly through a stab incision and set itdirectly on the bone surface. Then remove the trocar � 3.5 mmand the drill sleeve 5.0/3.5.
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 16
-
17
2Insert Seldrill™ Schanz screws
Required instruments
Seldrill™ Schanz Screws � 5.0 mm X94.782–788
Handle for Drill Sleeve 395.911
Drill Sleeve 6.0/5.0 short, with thread 395.921
Adapter for Seldrill™ Schanz Screws � 5.0 mm 393.103
Drill with attachment for AO/ASIF Quick Coupling type-dependent
Insert the Seldrill™ Schanz screw in the � 5.0 mm adapter, anduse the drill to screw it through the drill sleeve 6.0/5.0 until thedrill tip is anchored in the distant cortical bone.
If it is difficult to determine whether the screw has entered theopposite side of the cortical bone, it is recommendable to checkthe screw’s penetration depth with the image intensifier.
It is not necessary to completely penetrate the distant corticalbone since anchoring the thread in the near cortical boneand sinking the drill tip in the distant cortical bone effectivelyabsorbs bending force.
After screwing in the Seldrill™ Schanz screw, remove the drillsleeve and the drill with the adapter.
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 17
-
Alternative technique:
Required instruments
Seldrill™ Schanz Screws � 5.0 mm X94.782–788
Handle for Drill Sleeve 395.911
Drill Sleeve 6.0/5.0, short, with thread 395.921
Drill Sleeve 5.0/3.5, short 395.912
Trocar � 3.5 mm, short 394.181
Adapter for Seldrill™ Schanz Screws � 5.0 mm 393.103
Universal Chuck with T-Handle 393.100
Drill with attachment for AO/ASIF Quick Coupling Type-dependent
Insert the Seldrill™ Schanz screw � 5.0 mm in the adapter, anduse the drill to screw it through the drill sleeve 6.0/5.0 into thenear cortical bone.
Remove the drill and replace it with the universal drill chuck withthe T-handle (393.100). The screw can now be delicatelyscrewed manually into the middle of the distance cortical bone.It is not necessary to completely penetrate the distant corticalbone since anchoring the thread in the near cortical boneand sinking the drill tip in the distant cortical bone effectivelyabsorbs bending force.
Remove the drill sleeve and the universal chuck T-handle with.
Note: Only when bones are osteoporotic does the Seldrill™
Schanz screw have to be screwed a bit further into the distantcortical bone, and it may even slightly penetrate through it sincethis can increase anchoring stability.
Use in the metaphyseal region
The individual surgical steps are the same as when the screwsare used in the shaft area.
18 Synthes Large and Medium-Size External Fixators Surgical technique
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 18
-
19
Conventional self-tapping Schanz screw
Instead of self-drilling Schanz screws (Seldrill™), self-tappingscrews can also be used. In contrast to the Seldrill™ screws, self-tapping screws must be predrilled.
1Set the drill sleeve on the bone
Required instruments
Handle for Drill Sleeve 395.911
Drill Sleeve 6.0/5.0 short, with thread 395.921
Drill Sleeve 5.0/3.5, short 395.912
Trocar � 3.5 mm, short 394.181
Insert the drill sleeve assembly through a stab incision and set itdirectly on the bone surface and remove the trocar � 3.5 mm.
2Predrilling
Required instruments
Drill Bit � 3.5 mm, length 195/170 mm, 2-flute, for Quick Coupling 310.370
Drill with attachment for AO/ASIF Quick Coupling Type-dependent
Drill through both sides of the cortical bone with the � 3.5 mmdrill bit, then remove the drill sleeve 5.0/3.5.
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 19
-
20 Synthes Large and Medium-Size External Fixators Surgical technique
3Insert the self-tapping Schanz screw
Required instruments
Self-Tapping Schanz Screw X94.520–570
Handle for Drill Sleeve 395.911
Drill Sleeve 6.0/5.0 short, with thread 395.921
Universal Chuck with T-Handle 393.100
The Schanz screw can now be screwed in through the drillsleeve 6.0/5.0. The tip must be anchored in the distant corticalbone to effectively absorb bending force.
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 20
-
21
Remove the length gauge, and insert the tip of the Schanz screwinto the recess of the retaining disk. Slide the universal chuckover the smooth shaft of the Schanz screw to the height of thetip of the length gauge, and tighten the chuck on the Schanzscrew. Determining the length in this manner will ensure that thescrew will be firmly anchored in the distant cortical bone.
The Schanz screw can now be screwed in through the drill sleeve6.0/5.0 until the drill chuck stops on the drill sleeve.
Note: If the Schanz screw is screwed in beyond this point, it willstrip the thread due to the resistance of the drill sleeve.
Alternative technique
Alternately, the length of the required Schanz screw can also beprecisely checked using the length gauge.
Required instruments
Handle for Drill Sleeve 395.911
Drill Sleeve 6.0/5.0 short, with thread 395.921
Depth Gauge for Schanz Screws 393.780
Universal Chuck with T-Handle 393.100
After predrilling as described in step 2, the length gauge isguided through the drill sleeve 6.0/5.0 and hooked in the distantcortical bone.
Then move the retaining disk to the height of the drill sleeve andlock it with the locking screw.
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 21
-
22 Synthes Large and Medium-Size External Fixators Surgical technique
You can choose between a unilateral or modular frame construc-tion. If a modular frame is chosen, you can freely choosehow to set the Schanz screws. This method is recommended bythe AO as a standard technique for fractures that require re duc-tion.
Schanz screws, clamps and carbon fibre rods are required to con-struct the different frames. Instead of radiolucent carbon fibrerods, steel rods can be employed for all constructions with LargeExternal Fixators.
Modular frame using the rod-to-rodtechnique
1Set the Schanz screws
Set two Schanz screws per main fragment using the drill sleeveassembly.
Freely select their position appropriate for the fracture, soft tis-sue, and anatomical situation. The greater the distance betweenthe Schanz screws, the greater the stability of the frame.
2Connect the Schanz screws with carbon fibre rods
Required instruments
Carbon Fibre Rod � 11.0 mm 394.800–394.870
Clamp, clip-on, self-holding, MR-safe 390.008
Combination Wrench � 11.0 mm 321.160
The two Schanz screws per main fragment are connected with arod. Clip-on, self-holding clamps are used. Make sure thatthe rods project a bit beyond the fracture zone so that sufficientlength remains for the combination clamp.
Tighten all the clamp nuts.
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 22
-
23
3Connect the carbon fibre rods
Required instruments
Carbon Fibre Rod � 11.0 mm 394.800–394.870
Combination Clamp, clip-on, self-holding, MR-safe 390.005
Connect the two ends of the rods near the fracture to athird rod using two self-holding combination clamps. Do not yettighten the nuts for the combination clamps.
4Reduce the fracture
Use the two partial frames as handles to reduce the fracture.
After checking the reduction, alternately tighten the nuts of thecombination clamps in the image intensifier while manuallyholding the reduction.
Alternative technique:
Required instruments
Clamp, clip-on, self-holding, MR-safe 390.008
Combination Wrench � 11.0 mm 321.160
Carbon Fibre Rod � 11.0 mm 394.800–870
For each fragment, additionally affix one long rod that can beused as a temporary lever for reduction. The leverage can beused for controlled reduction that requires less force (particularlyrecommended for the femur). In addition, your hands will remain safely outside the X-rays when this technique is applied.
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 23
-
24 Synthes Large and Medium-Size External Fixators Surgical technique
5Tighten nuts
Required instruments
Combination Wrench � 11.0 mm 321.160
Finally, recheck all the nuts with the wrench to ensure they areall tight.
Retighten all the nuts after 24 hours.
6Secondary reduction
A secondary correction of the reduction can be performed withinthe first few days after surgery. Only the two combination clampsare released. The correction can then be made using the partialframes that move relative to each other.
After the correction, retighten the two combination clamps.
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 24
-
25
� 11.0 mm system
Adult femur
Insert 2–3 Schanz screws into the proximal and distal main frag-ment from a lateral direction. With adipose patients, it is recommendable to use 6.0 mm screws. The stability of the rod-to-rod assembly can be increased with an additional neutral iza-tion rod.
Bridging the ankle
UnilateralInsert the screws into the calcaneus and talus from a medial direction. In the tibia, set the screws at an anteromedial to medial angle, and connect them using the rod-to-rod technique.
Bridging the knee joint
Insert two Schanz screws into the distal femur from a lateral orventral direction, and into the proximal tibia from an antero me-dial direction. Connect them using the rod-to-rod technique.
Additional treatment options usingthe rod-to-rod technique
TriangularInsert the first screw from an anteromedial direction into the tibial shaft. Insert the Steinmann pin through the calcaneus, andaffix the rods in the form of a tent between the first screwand Steinmann pin. Then reduce the fracture by pulling length-wise with balanced ligamentotaxis. Then insert two screwsinto the tibia starting from the medial rod. For prophylaxis of pesequines, insert an additional Schanz screw at an angle fromabove into the first and fifth metatarsal bone.
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 25
-
26 Synthes Large and Medium-Size External Fixators Surgical technique
Humerus
Insert the Schanz screws in the proximal humerus from a lateraldirection and into the distal humerus from a dorsal direction,avoiding injury to the radial nerve. Connect the Schanz screwsusing the rod-to-rod technique.
Child femur
Insert 2–3 Schanz screws into the proximal and distal main frag-ment from a lateral direction. The stability of the rod-to-rod assembly can be increased with an additional neutralization rod.
� 8.0 mm system
Bridging the elbow
Insert Schanz screws into the distal humerus from a dorsal direc-tion. The screws can be introduced into the forearm from a dorsal direction into the ulna. Connect the Schanz screws usingthe rod-to-rod technique.
It is only recommendable to insert an additional screw in the radius to stabilize the radio-ulnar joint.
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 26
-
27
Using multi pin clamps
The advantage of multi pin clamps is that reduction can be car-ried out using the above-described rod-to-rod technique. TheSchanz screws with clamps serve as an external reduction instru-ment system. Additional reduction levers may be used tolengthen the lever arm (see alternative technique).
1Set the Schanz screws for multi pin clamps
Required instruments
SeldrillTM Schanz Screws X94.782–788
Drill Guide Handle, 6 positions 392.963
Drill Sleeve 6.0/5.0, short, with thread 395.921
Drill Sleeve 5.0/3.5, short 395.912
Trocar � 3.5 mm, short 394.181
Drill Sleeve 6.0/5.0 long, with thread 395.923
Drill Sleeve 5.0/3.5, long 395.913
Trocar � 3.5 mm, long 394.182
Adapter for SelldrillTM Schanz Screws � 5.0 mm 393.103
Universal Chuck with T-Handle 393.100
Drill with attachment for AO/ASIF Quick coupling Type-dependent
Insert two Schanz screws into the distal and proximal fragmentsusing a parallel drill sleeve.
2Assembling the Fixator
Required instruments
Multi Pin Clamp, 6 positions, large, MR-safe 390.002
Carbon Fibre Rod � 11.0 mm 394.800–870
Combination Wrench � 11.0 mm 321.160
Guide the clamps of the premounted clamp-rod constructionover the Schanz screws, and tighten the clamps on the screwswith the � 11.0 combination wrench.
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 27
-
28 Synthes Large and Medium-Size External Fixators Surgical technique
4aUnilateral single frame with multi pin clamps
Required instruments
Combination Wrench � 11.0 mm 321.160
After reduction, tighten all the screws of the clamps.
3Reduction
Thanks to the clamps that enable the Schanz screws and carbonfibre rod to be independently fixed, the fracture can be optimally reduced using the modular technique with the doubleSchanz screws as levers.
Alternative technique
Required instruments
Reduction Handle for Large Multi Pin Clamp 392.966
Combination Wrench � 11.0 mm 321.160
Wrench, hexagonal � 5.0 mm, long, angled 392.919
In certain cases, it is recommendable to use additional reductionlevers. Greater force can be applied from the increased leverage.In addition, the levers enable free image intensifier control.
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 28
-
29
4bUnilateral double frame construction with multi pinclamps
Required instruments
Rod Attachment for large Multi Pin Clamp 390.003
Combination Wrench � 11.0 mm 321.160
If additional rod connectors are attached to the frame, a double-frame construction can be created to increase the stability ofthe frame.
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 29
-
30 Synthes Large and Medium-Size External Fixators Surgical technique
Unilateral frame with single-rod ordouble-rod construction
1Provisionally reduce the fracture, and set the first Schanzscrew
Provisionally reduce the fracture, and insert the first Schanzscrew in a main fragment. From a ventrolateral direction, locatethe first screw as distally as possible.
2Mount the carbon fibre rod and clamp
Required instruments
Carbon Fibre Rod � 11.0 mm 394.800–394.870
Clamp, clip-on, self-holding, MR-safe 390.008
Combination Wrench � 11.0 mm 321.160
Mount the rod with the assistance of a clip-on, self-holdingclamp.
3Definitively reduce the fracture, and set the second Schanz screw
After reducing the fracture, set the second Schanz screw as prox-imally as possible. Secure the reduction by tightening the proximal and distal clamp, yet continue to hold the reduction until the fracture is definitively fixed (see following pages).
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 30
-
31
4aUnilateral frame with single-rod construction
Required instruments
Clamp, clip-on, self-holding, MR-safe 390.008
Combination Wrench � 11.0 mm 321.160
Insert the remaining Schanz screws, and place the required clip-on, self-holding clamps on the rod to the side of the screws.Tighten all the clamp nuts.
4bUnilateral frame with double-rod construction
Required instruments
Clamp, clip-on, self-holding, MR-safe 390.008
Carbon Fibre Rod � 11.0 mm 394.800–394.870
Combination Wrench � 11.0 mm 321.160
A double-rod construction increases stability of the assembly inthe case of bone defects or comminuted fractures. Use the sameprocedure as for single-rod construction; however, after settingthe first two Schanz screws, place the second rod over the first.
The double-rod construction should be standard for the femur.
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 31
-
32 Synthes Large and Medium-Size External Fixators Surgical technique
Particular care is required with external fixation assemblies in thepelvis. Indications for stabilizing the anterior pelvic ring with alarge external fixator are: Unstable fractures in the anterior pelvicring, or symphysis fractures with or without participation ofthe posterior pelvic ring. This type of stabilization is also possiblein emergencies such as polytrauma, open wounds and,where appropriate, as an alternative to internal osteosynthesis.
The pelvis can be stabilized with an external fixator both at theiliac crest and the supraacetabular region. Although the point ofentry for the Schanz screw is easier to find on the iliac crest, it is frequently difficult or impossible to attain a permanent andsecure seat for the Schanz screws in the curved ala of the ilium.For this reason, the treatment of the pelvis will be illustratedfirst with reference to supraacetabular fixation in the followingsurgical instructions.
Pelvic use
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 32
-
33
1Setting the first two Schanz screws
Anatomical landmarks for the supraacetabular placement of theSchanz screws are the superior anterior iliac crest and inferior anterior iliac crest.
Set a self-drilling/self-tapping Schanz screw (Seldrill™) on the rightand left between the inferior anterior iliac spine, and the ven-tral labrum of the acetabulum. Proceeding from the superior an-terior iliac crest, this site of entry is 4 to 6 cm in a caudal direc-tion, and 3 to 4 cm in a medial direction. When inserting thescrew, make sure that the lateral femoral cutaneous nerve is notdamaged.
To prevent the screws from penetrating the acetabulum, makesure that the screw is aligned 20–30° medially and 10–20° cranially. When the screws are mechanically inserted, concentrateon feeling if the screw is properly screwing into the bone substance. Monitor the site of entry and the advance of the self-drilling screws with the image intensifier.
The final turns and fine adjustment of the Schanz screw shouldbe done manually with the universal handle.
Supraacetabular pin placement
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 33
-
34 Synthes Large and Medium-Size External Fixators Surgical technique
2Setting the second two Schanz screws
The second Schanz screws to be set on both sides are intro-duced somewhat cranially to the first set of screws. The two tipscan slightly converge.
3Ventral connection
Required instruments
Carbon Fibre Rod � 11.0 mm 394.800–394.870
Clamp, clip-on, self-holding, MR-safe 390.008
Combination Clamp, clip-on, self-holding, MR-safe 390.005
Combination Wrench � 11.0 mm 321.160
Initially, the two caudal screws of the bilaterally set Schanzscrews are connected with two carbon fibre rods and a self-hold-ing combination clamp. It is important for the assembly to belarge enough to allow a sufficient degree of freedom to accom-modate swelling of the abdomen.
The rods are held with a combination clamp but are not tight-ened.
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 34
-
35
4Reduction
Required instruments
Combination Wrench � 11.0 mm 321.160
Manually reduce the pelvic ring by pressure, stretching, or usingthe Schanz screws as levers. In certain cases, distraction bypulling on a leg can be advantageous. After reduction, tightenthe combination clamp.
5Connect the second pair of screws
Required instruments
Carbon Fibre Rod � 11.0 mm 394.800–394.870
Clamp, clip-on, self-holding, MR-safe 390.008
Combination Clamp, clip-on, self-holding, MR-safe 390.005
Combination Wrench � 11.0 mm 321.160
If the reduction of the pelvis has been correctly carried out, thetwo top Schanz screws can be connected with each other.
Note: Instead of the rods and combination clamps, a curved car-bon fibre rod 394.790 can be used for both the first and secondpair of screws.
6Connecting the partial frames
Required instruments
Connecting Rod � 5.0 mm, Stainless Steel 393.900–393.940
Self-Tapping Schanz Screw X94.520–570
Protective Cap, for Schanz Screws and Steinmann Pins � 5.0 mm 393.420
To substantially increase the stability of the construction, the twopartial frames are connected with additional 4.0 mm cross-braces (such as 4.0 mm carbon fibre rods or Schanz screwswith a protective cap). The clip-on, self-holding clamps are par-ticularly suitable for mounting an additional cross-brace.
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 35
-
36 Synthes Large and Medium-Size External Fixators Surgical technique
Placing pins in the Iliac crest
1Setting the first two Schanz screws
The iliac crests serve as landmarks for introducing the Schanzscrews. Marking the inner and outer surfaces of the ala of the ilium with Kirschner wires can help establish the alignmentfor placing the first Schanz screw.
Note: It is advantageous to place at least one screw in the margin of the os ilium on both sides.
2Setting the second two Schanz screws
The second screw is set slightly posterior (approximately 2 cm) tothe first Schanz screw.
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 36
-
37
3Reduction and definitive assembly
Required instruments
Carbon Fibre Rod � 11.0 mm 394.800–394.870
Clamp, clip-on, self holding, MR-safe 390.008
Combination Clamp, clip-on, self holding, MR-safe 390.005
Combination Wrench � 11.0 mm 321.160
Self-Tapping Schanz Screw X94.520-570
Protective Cap, for Schanz Screws and Steinmann Pins � 5.0 mm 393.420
The additional steps for fixing the pelvis are analogous to points3–6 on the previous page.
Note: In individual cases, the supraacetabular assembly andcrest assembly can be combined.
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 37
-
38 Synthes Large and Medium-Size External Fixators Surgical technique
Arthrodesis and osteotomies generally require symmetrical compression that is best generated using a bilateral frame con-struction.
Bilateral frame for arthrodesis andosteotomies
Bilateral frames for arthrodesis
Required instruments
Steinmann Pin � 5 mm with trocar tip X93.500–X93.590
Carbon Fibre Rod � 11.0 mm 394.800–394.870
Clamp, clip-on, self-holding, MR-safe 390.008
Combination Wrench � 11.0 mm 321.160
Protective Cap, for Schanz Screws and Steinmann Pins � 5.0 mm 393.420
Compressor, open 393.760
Drill Bit � 3.5 mm, length 195/170 mm, 2-flute, for Quick Coupling 310.370
The large external fixator enables effective compression by pre-tensioning the Steinmann pins in relation to each other. Maxi-mum stability is attained by first untightening the relevant clampnuts, then generating the desired compression using the opencompressor, and then retightening the nuts.
Knee arthrodesis Ankle arthrodesis
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 38
-
39
Bilateral frames for Osteotomies
Required instruments
Steinmann Pin � 5 mm with trocar tip X93.500–X93.590
Carbon Fibre Rod � 11.0 mm 394.800–394.870
Clamp, clip-on, self-holding, MR-safe 390.008
Combination Wrench � 11.0 mm 321.160
Protective Cap, for Schanz Screws and Steinmann Pins � 5.0 mm 393.420
Compressor, open 393.760
Drill Bit � 3.5 mm, length 195/170 mm, 2-flute, for Quick Coupling 310.370
In the case of osteotomies of the proximal and distal tibia, innerfixation is generally preferred if there are no associated soft- tissue problems.
Compression osteotomies with a bilateral frame construction aresupportive of the metaphysis of rapid bone healing.
Proximal tibia osteotomy Distal tibia osteotomy
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 39
-
40 Synthes Large and Medium-Size External Fixators Surgical technique
Bennek J (2000) The use of upper limb external fixation in paediatric trauma. Injury, Int J Care Injured 31, 21–26.
Gausepohl T, Koebke J, Pennig D, Hobrecker S, Mader K (2000)The anatomical base of unilateral external fixation in the upperlimb. Injury, Int J Care Injured 31, 11–20.
Miner T, Carroll KL (2000) Outcomes of External Fixation of Pediatric Femoral Shaft Fractures. Journal of Pediatric Ortho -paedics, 20:405-410.
Rüedi TP, Murphy WM (2000) AO Principles of Fracture Manage-ment. Thieme, Stuttgart, New York.
Ruland WO (2000) Is there a place for external fixation in humeral shaft fractures? Injury. Int. J. Care Injured 31, 27–34.
Kapukaya A, Subasi M, Necmioglu S, Arslan H, Kesemenli lC,Yildirim K (1998) Treatment of closed femoral diaphyseal fractures with external fixators in children. Arch Orthop TraumaSurg, 117:387–389.
Hull JB, Bell MJ (1997) Modern Trends for External Fixation ofFractures in Children: A critical Review. Journal of Pediatric Orthopaedics, 6:103–109.
Gregory P, Pevny T, Teague D (1996) Early Complications withExternal Fixation of Pediatric Femoral Shaft Fractures. Journal ofOrthopaedic Trauma, Vol 10, No 3, 191–198.
Buckley SL (1995) Technique of External Fixation of grossly un-stable or open tibial shaft fractures in children. Operative Tech-niques in Orthopaedics, Vol 5, No 2 (April):157-163.
Davis TJ, Topping RE, Blanco JS (1995) External Fixation of Pediatric Femoral Fractures. Clinical Orthopaedics and RelatedResearch, No 318, 191–198.
Aronson J, Tursky EA (1992) External Fixation of Femur Fracturesin Children. Journal of Pediatric Orthopaedics, 12:157–163.
Gregory RJH, Cubison TCS, Pinder IM, Smith SR (1992) ExternalFixation of lower limb fractures in children. The Journal ofTrauma, Vol 33, No 5, pp 691-693.
Heim D, Regazzoni P, Perren S (1992) Der Fixateur externe beioffenen Frakturen: Gegenwärtiger Stand seiner Anwendung. Injury, No 23, suppl. 2.
Bibliography
Regazzoni P (1989) Das Ilizarov-Konzept mit einem modularenRohrfixateursystem. Operative Orthopädie und Traumatologie,No 21, 90–93.
Rüter A, Brutscher R (1988) Die Behandlung ausgedehnter Kno-chen defekte am Unterschenkel durch die Verschiebungs osteoto-mie nach Ilizarov. Der Chirurg, 59, 357–359.
Alonso JE, Horowitz M (1987) Use of the AO/ASIF External Fixator in Children. Journal of Pediatric Orthopaedics, 7:594–600.
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 40
-
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite 41
-
0123 036.
000.
237
SE_
0010
80 A
A
© S
ynth
es
2005
Pr
inte
d in
Sw
itzer
land
LA
G
Subj
ect
to m
odifi
catio
ns.
Presented by:
Ö036.000.237öAA-ä
0X6.000.237_AA.qxp:0X6.000.237_AA 04.12.2008 15:52 Uhr Seite U4
/ColorImageDict > /JPEG2000ColorACSImageDict > /JPEG2000ColorImageDict > /AntiAliasGrayImages false /CropGrayImages true /GrayImageMinResolution 150 /GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true /GrayImageDownsampleType /Bicubic /GrayImageResolution 150 /GrayImageDepth -1 /GrayImageMinDownsampleDepth 2 /GrayImageDownsampleThreshold 1.10000 /EncodeGrayImages true /GrayImageFilter /DCTEncode /AutoFilterGrayImages true /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict > /GrayImageDict > /JPEG2000GrayACSImageDict > /JPEG2000GrayImageDict > /AntiAliasMonoImages false /CropMonoImages true /MonoImageMinResolution 1200 /MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true /MonoImageDownsampleType /Bicubic /MonoImageResolution 600 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.10000 /EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode /MonoImageDict > /AllowPSXObjects true /CheckCompliance [ /None ] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile (None) /PDFXOutputConditionIdentifier () /PDFXOutputCondition () /PDFXRegistryName () /PDFXTrapped /False
/CreateJDFFile false /SyntheticBoldness 1.000000 /Description >>> setdistillerparams> setpagedevice