lasso regularization of generalized linear models - matlab & simulink

Lasso Regularization of Generalized Linear Models

On this page

What is Generalized Linear Model Lasso Regularization?

Regularize Poisson Regression

Regularize Logistic Regression

Regularize Wide Data in Parallel

Generalized Linear Model Lasso and Elastic Net

References

What is Generalized Linear Model Lasso Regularization?Lasso is a regularization technique. Use lassoglm to:

Reduce the number of predictors in a generalized linear model.

Identify important predictors.

Select among redundant predictors.

Produce shrinkage estimates with potentially lower predictive errors than ordinary least squares.

Elastic net is a related technique. Use it when you have several highly correlated variables. lassoglm provideselastic net regularization when you set the Alpha name-value pair to a number strictly between 0 and 1.

For details about lasso and elastic net computations and algorithms, see Generalized Linear Model Lasso andElastic Net. For a discussion of generalized linear models, see What Are Generalized Linear Models?.

Regularize Poisson RegressionThis example shows how to identify and remove redundant predictors from a generalized linear model.

Create data with 20 predictors, and Poisson responses using just three of the predictors, plus a constant.

rng('default') % for reproducibilityX = randn(100,20);mu = exp(X(:,[5 10 15])*[.4;.2;.3] + 1);y = poissrnd(mu);

Construct a cross-validated lasso regularization of a Poisson regression model of the data.

[B FitInfo] = lassoglm(X,y,'poisson','CV',10);

Examine the cross-validation plot to see the effect of the Lambda regularization parameter.

lassoPlot(B,FitInfo,'plottype','CV');

Lasso Regularization of Generalized Linear Models - MATLAB... http://www.mathworks.com/help/stats/lasso-regularization-of-g...

1 of 14 6/2/14 9:57 AM

The green circle and dashed line locate the Lambda with minimal cross-validation error. The blue circle and dashedline locate the point with minimal cross-validation error plus one standard deviation.

Find the nonzero model coefficients corresponding to the two identified points.

minpts = find(B(:,FitInfo.IndexMinDeviance))

minpts =

3 5 6 10 11 15 16

min1pts = find(B(:,FitInfo.Index1SE))

min1pts =

5 10 15


2 of 14 6/2/14 9:57 AM

The coefficients from the minimal plus one standard error point are exactly those coefficients used to create thedata.

Find the values of the model coefficients at the minimal plus one standard error point.

B(min1pts,FitInfo.Index1SE)

ans =

0.2903 0.0789 0.2081

The values of the coefficients are, as expected, smaller than the original [0.4,0.2,0.3]. Lasso works by"shrinkage," which biases predictor coefficients toward zero.

The constant term is in the FitInfo.Intercept vector.

FitInfo.Intercept(FitInfo.Index1SE)

ans =

1.0879

The constant term is near 1, which is the value used to generate the data.

Regularize Logistic RegressionThis example shows how to regularize binomial regression. The default (canonical) link function for binomialregression is the logistic function.

Step 1. Prepare the data.

Step 2. Create a cross-validated fit.

Step 3. Examine plots to find appropriate regularization.

Step 4. Create a regularized model.

Step 5. Examine residuals.

Step 6. Alternative: Use identified predictors in a least-squares generalized linear model.

Step 1. Prepare the data.

Load the ionosphere data. The response Y is a cell array of 'g' or 'b' strings. Convert the cells to logical values,with true representing 'g'. Remove the first two columns of X because they have some awkward statisticalproperties, which are beyond the scope of this discussion.

load ionosphereYbool = strcmp(Y,'g');X = X(:,3:end);


3 of 14 6/2/14 9:57 AM

Step 2. Create a cross-validated fit.

Construct a regularized binomial regression using 25 Lambda values and 10-fold cross validation. This process cantake a few minutes.

rng('default') % for reproducibility[B,FitInfo] = lassoglm(X,Ybool,'binomial',... 'NumLambda',25,'CV',10);

Step 3. Examine plots to find appropriate regularization.

lassoPlot can give both a standard trace plot and a cross-validated deviance plot. Examine both plots.

lassoPlot(B,FitInfo,'PlotType','CV');

The plot identifies the minimum-deviance point with a green circle and dashed line as a function of the regularizationparameter Lambda. The blue circled point has minimum deviance plus no more than one standard deviation.

lassoPlot(B,FitInfo,'PlotType','Lambda','XScale','log');


4 of 14 6/2/14 9:57 AM

The trace plot shows nonzero model coefficients as a function of the regularization parameter Lambda. Becausethere are 32 predictors and a linear model, there are 32 curves. As Lambda increases to the left, lassoglm setsvarious coefficients to zero, removing them from the model.

The trace plot is somewhat compressed. Zoom in to see more detail.

xlim([.01 .1])ylim([-3 3])


5 of 14 6/2/14 9:57 AM

As Lambda increases toward the left side of the plot, fewer nonzero coefficients remain.

Find the number of nonzero model coefficients at the Lambda value with minimum deviance plus one standarddeviation point. The regularized model coefficients are in column FitInfo.Index1SE of the B matrix.

indx = FitInfo.Index1SE;B0 = B(:,indx);nonzeros = sum(B0 ~= 0)

nonzeros =

14

When you set Lambda to FitInfo.Index1SE, lassoglm removes over half of the 32 original predictors.

Step 4. Create a regularized model.

The constant term is in the FitInfo.Index1SE entry of the FitInfo.Intercept vector. Call that value cnst.

The model is logit(mu) = log(mu/(1 - mu)) X*B0 + cnst . Therefore, for predictions, mu = exp(X*B0 +cnst)/(1+exp(x*B0 + cnst)).

The glmval function evaluates model predictions. It assumes that the first model coefficient relates to the constantterm. Therefore, create a coefficient vector with the constant term first.

cnst = FitInfo.Intercept(indx);B1 = [cnst;B0];


6 of 14 6/2/14 9:57 AM

Step 5. Examine residuals.

Plot the training data against the model predictions for the regularized lassoglm model.

preds = glmval(B1,X,'logit');hist(Ybool - preds) % plot residualstitle('Residuals from lassoglm model')

Step 6. Alternative: Use identified predictors in a least-squares generalized linear model.

Instead of using the biased predictions from the model, you can make an unbiased model using just the identifiedpredictors.

predictors = find(B0); % indices of nonzero predictorsmdl = fitglm(X,Ybool,'linear',... 'Distribution','binomial','PredictorVars',predictors)

mdl =

Generalized Linear regression model: y ~ [Linear formula with 15 terms in 14 predictors] Distribution = Binomial

Estimated Coefficients: Estimate SE tStat pValue


7 of 14 6/2/14 9:57 AM

_________ _______ ________ __________

(Intercept) -2.9367 0.50926 -5.7666 8.0893e-09 x1 2.492 0.60795 4.099 4.1502e-05 x3 2.5501 0.63304 4.0284 5.616e-05 x4 0.48816 0.50336 0.9698 0.33215 x5 0.6158 0.62192 0.99015 0.3221 x6 2.294 0.5421 4.2317 2.3198e-05 x7 0.77842 0.57765 1.3476 0.1778 x12 1.7808 0.54316 3.2786 0.0010432 x16 -0.070993 0.50515 -0.14054 0.88823 x20 -2.7767 0.55131 -5.0365 4.7402e-07 x24 2.0212 0.57639 3.5067 0.00045372 x25 -2.3796 0.58274 -4.0835 4.4363e-05 x27 0.79564 0.55904 1.4232 0.15467 x29 1.2689 0.55468 2.2876 0.022162 x32 -1.5681 0.54336 -2.8859 0.0039035

351 observations, 336 error degrees of freedomDispersion: 1Chi^2-statistic vs. constant model: 262, p-value = 1e-47

Plot the residuals of the model.

plotResiduals(mdl)


8 of 14 6/2/14 9:57 AM

As expected, residuals from the least-squares model are slightly smaller than those of the regularized model.However, this does not mean that mdl is a better predictor for new data.

Regularize Wide Data in ParallelThis example shows how to regularize a model with many more predictors than observations. Wide data is data withmore predictors than observations. Typically, with wide data you want to identify important predictors. Use lassoglmas an exploratory or screening tool to select a smaller set of variables to prioritize your modeling and research. Useparallel computing to speed up cross validation.

Load the ovariancancer data. This data has 216 observations and 4000 predictors in the obs workspace variable.The responses are binary, either 'Cancer' or 'Normal', in the grp workspace variable. Convert the responses tobinary for use in lassoglm.

load ovariancancery = strcmp(grp,'Cancer');

Set options to use parallel computing. Prepare to compute in parallel using parpool.

opt = statset('UseParallel',true);parpool()

Starting parpool using the 'local' profile ... connected to 2 workers.

ans =


9 of 14 6/2/14 9:57 AM

Pool with properties:

AttachedFiles: {0x1 cell} NumWorkers: 2 IdleTimeout: 30 Cluster: [1x1 parallel.cluster.Local] RequestQueue: [1x1 parallel.RequestQueue] SpmdEnabled: 1

Fit a cross-validated set of regularized models. Use the Alpha parameter to favor retaining groups of highlycorrelated predictors, as opposed to eliminating all but one member of the group. Commonly, you use a relativelylarge value of Alpha.

rng('default') % for reproducibilitytic[B,S] = lassoglm(obs,y,'binomial','NumLambda',100, ... 'Alpha',0.9,'LambdaRatio',1e-4,'CV',10,'Options',opt);toc

Elapsed time is 398.635386 seconds.

Examine cross-validation plot.

lassoPlot(B,S,'PlotType','CV');

Examine trace plot.

lassoPlot(B,S,'PlotType','Lambda','XScale','log')


10 of 14 6/2/14 9:57 AM

The right (green) vertical dashed line represents the Lambda providing the smallest cross-validated deviance. Theleft (blue) dashed line has the minimal deviance plus no more than one standard deviation. This blue line has manyfewer predictors:

[S.DF(S.Index1SE) S.DF(S.IndexMinDeviance)]

ans =

50 86

You asked lassoglm to fit using 100 different Lambda values. How many did it use?

size(B)

ans =

4000 84

lassoglm stopped after 84 values because the deviance was too small for small Lambda values. To avoid overfitting,lassoglm halts when the deviance of the fitted model is too small compared to the deviance in the binaryresponses, ignoring the predictor variables.

You can force lassoglm to include more terms by explicitly providing a set of Lambda values.

minLambda = min(S.Lambda);explicitLambda = [minLambda*[.1 .01 .001] S.Lambda];[B2,S2] = lassoglm(obs,y,'binomial','Lambda',explicitLambda,... 'LambdaRatio',1e-4, 'CV',10,'Options',opt);


11 of 14 6/2/14 9:57 AM

length(S2.Lambda)

ans =

87

lassoglm used the three smaller values in fitting.

To save time, you can use:

Fewer Lambda, meaning fewer fits

Fewer cross-validation folds

A larger value for LambdaRatio

Use serial computation and all three of these time-saving methods:

tic[Bquick,Squick] = lassoglm(obs,y,'binomial','NumLambda',25,... 'LambdaRatio',1e-2,'CV',5);toc

Elapsed time is 51.708074 seconds.

Graphically compare the new results to the first results.

lassoPlot(Bquick,Squick,'PlotType','CV');

lassoPlot(Bquick,Squick,'PlotType','Lambda','XScale','log')


12 of 14 6/2/14 9:57 AM

The number of nonzero coefficients in the lowest plus one standard deviation model is around 50, similar to the firstcomputation.

Generalized Linear Model Lasso and Elastic NetOverview of Lasso and Elastic Net

Lasso is a regularization technique for estimating generalized linear models. Lasso includes a penalty term thatconstrains the size of the estimated coefficients. Therefore, it resembles ridge regression. Lasso is a shrinkageestimator: it generates coefficient estimates that are biased to be small. Nevertheless, a lasso estimator can havesmaller error than an ordinary maximum likelihood estimator when you apply it to new data.

Unlike ridge regression, as the penalty term increases, the lasso technique sets more coefficients to zero. Thismeans that the lasso estimator is a smaller model, with fewer predictors. As such, lasso is an alternative tostepwise regression and other model selection and dimensionality reduction techniques.

Elastic net is a related technique. Elastic net is akin to a hybrid of ridge regression and lasso regularization. Likelasso, elastic net can generate reduced models by generating zero-valued coefficients. Empirical studies suggestthat the elastic net technique can outperform lasso on data with highly correlated predictors.

Definition of Lasso for Generalized Linear Models

For a nonnegative value of , lasso solves the problem

where

Deviance is the deviance of the model fit to the responses using intercept 0 and predictor coefficients . Theformula for Deviance depends on the distr parameter you supply to lassoglm. Minimizing the -penalizeddeviance is equivalent to maximizing the -penalized log likelihood.

N is the number of observations.

is a nonnegative regularization parameter corresponding to one value of Lambda.

Parameters 0 and are scalar and p-vector respectively.


13 of 14 6/2/14 9:57 AM

As increases, the number of nonzero components of decreases.

The lasso problem involves the L1 norm of , as contrasted with the elastic net algorithm.

Definition of Elastic Net for Generalized Linear Models

For an strictly between 0 and 1, and a nonnegative , elastic net solves the problem

where

Elastic net is the same as lasso when = 1. For other values of , the penalty term P() interpolates between theL1 norm of and the squared L2 norm of . As shrinks toward 0, elastic net approaches ridge regression.

References[1] Tibshirani, R. Regression Shrinkage and Selection via the Lasso. Journal of the Royal Statistical Society, SeriesB, Vol. 58, No. 1, pp. 267288, 1996.

[2] Zou, H. and T. Hastie. Regularization and Variable Selection via the Elastic Net. Journal of the Royal StatisticalSociety, Series B, Vol. 67, No. 2, pp. 301320, 2005.

[3] Friedman, J., R. Tibshirani, and T. Hastie. Regularization Paths for Generalized Linear Models via CoordinateDescent. Journal of Statistical Software, Vol. 33, No. 1, 2010. http://www.jstatsoft.org/v33/i01(http://www.jstatsoft.org/v33/i01)

[4] Hastie, T., R. Tibshirani, and J. Friedman. The Elements of Statistical Learning, 2nd edition. Springer, New York,2008.

[5] McCullagh, P., and J. A. Nelder. Generalized Linear Models, 2nd edition. Chapman & Hall/CRC Press, 1989.


14 of 14 6/2/14 9:57 AM

lasso regularization of generalized linear models - matlab & simulink

Documents

regularization technique

poisson regression model

nonzero model coefficients

appropriate regularization

regularized model

b fitinfo

minimal crossvalidation

redundant predictors