last login

7/26/2019 Last Login

http://slidepdf.com/reader/full/last-login 1/49

Last login: Thu Jun 16 14:00:57 on ttys001FWEFASD-M-VAD9:~ fwefasd$ ssh fwefasd@fwefasd-sjc-ads

WARNING!!!READ THIS BEFORE ATTEMPTING TO LOGON

This System is for the use of authorized users only. Individualsusing this computer without authority, or in excess of theirauthority, are subject to having all of their activities on thissystem monitored and recorded by system personnel. In the courseof monitoring individuals improperly using this system, or in thecourse of system maintenance, the activities of authorized usersmay also be monitored. Anyone using this system expresslyconsents to such monitoring and is advised that if suchmonitoring reveals possible criminal activity, system personnelmay provide the evidence of such monitoring to law enforcementofficials.

Dddada Acceptable Use Policy:http://wwwin.dddada.com/infosec/policies/acceptableuse.shtml

fwefasd@fwefasd-sjc-ads's password:Last login: Thu Jun 16 01:31:39 2016 from 10.232.13.16Dddada Linux 5.50-5Server Kickstarted on: Sat Jun 13 05:53:15 PDT 2009.########################################################################### WARNING - ADS is a managed service, with automated provisioning.## If this is not your system, using it will impact the work of## the registered user and you risk losing your work if the VM is## deleted by either the registered user or the system automation#### Please use this link for FAQ information concerning ADS, including## how to get your own Aurora system:## http://lds.gforge.dddada.com/twiki/prod/bin/view/Know/WebHome#### REMINDER: /nobackup is NOT a backed up filesystem and is made## available ONLY as temporary storage for data that you can easily

## re-create after unexpected outages or deletions. Please refer to## the FAQ on /nobackup usage guidelines, located here:## http://lds.gforge.dddada.com/twiki/prod/bin/view/Know/UsingNobackup###########################################################################



-bash-3.2$-bash-3.2$-bash-3.2$-bash-3.2$-bash-3.2$-bash-3.2$-bash-3.2$-bash-3.2$-bash-3.2$ copy scp://[email protected]//ws/fwefasd-sjc/LC-rpm-d_42.bin bootflash: vrf management-bash: copy: command not found-bash-3.2$ telnet 172.31.145.130 2029Trying 172.31.145.130...Connected to 172.31.145.130 (172.31.145.130).Escape character is '^]'.

User Access Verificationch27 login: admin

Password:Dddada Nexus Operating System (NX-OS) SoftwareTAC support: http://www.dddada.com/tacCopyright (C) 2002-2016, Dddada and/or its affiliates.All rights reserved.The copyrights to certain works contained in this software areowned by other third parties and used and distributed under their ownlicenses, such as open source. This software is provided "as is," andunlessotherwise stated, there is no warranty, express or implied, includingbut notlimited to warranties of merchantability and fitness for a particularpurpose.Certain components of this software are licensed underthe GNU General Public License (GPL) version 2.0 orGNU General Public License (GPL) version 3.0 or the GNULesser General Public License (LGPL) Version 2.1 orLesser General Public License (LGPL) Version 2.0.A copy of each such license is available athttp://www.opensource.org/licenses/gpl-2.0.php andhttp://opensource.org/licenses/gpl-3.0.html andhttp://www.opensource.org/licenses/lgpl-2.1.php andhttp://www.gnu.org/licenses/old-licenses/library.txt.

ch27#ch27# sh modMod Ports Module-Type Model

Status--- ----- ------------------------------------- --------------------- ---------2 36 36x100G Ethernet Module N9K-X9736C-Epowered-dn3 36 36x100G Ethernet Module N9K-X9736C-EXok4 32 32x100G Ethernet Module N9K-X9732C-EXok22 0 4-slot Fabric Module N9K-C9504-FM-E



ok24 0 4-slot Fabric Module N9K-C9504-FM-Eok27 0 Supervisor Module N9K-SUP-Aactive *28 0 Supervisor Module N9K-SUP-Aha-standby29 0 System Controller N9K-SC-Aactive30 0 System Controller N9K-SC-Astandby

Mod Power-Status Reason--- ------------ ---------------------------2 powered-dn Configured Power down

Mod Sw Hw Slot--- ---------------- ------ ----3 7.0(3)I4(1.41) 0.1010 LC34 7.0(3)I4(1.41) 0.1040 LC4

22 7.0(3)I4(1.41) 0.1010 FM224 7.0(3)I4(1.41) 0.1010 FM427 7.0(3)I4(1.41) 1.5 SUP1ch27# copy scp://[email protected]//ws/fwefasd-sjc/LC-rpm-d_42.bin bootflash: vrf management

WARNING!!!READ THIS BEFORE ATTEMPTING TO LOGON

This System is for the use of authorized users only. Individualsusing this computer without authority, or in excess of theirauthority, are subject to having all of their activities on thissystem monitored and recorded by system personnel. In the courseof monitoring individuals improperly using this system, or in thecourse of system maintenance, the activities of authorized usersmay also be monitored. Anyone using this system expresslyconsents to such monitoring and is advised that if suchmonitoring reveals possible criminal activity, system personnelmay provide the evidence of such monitoring to law enforcementofficials.

Dddada Acceptable Use Policy:http://wwwin.dddada.com/infosec/policies/acceptableuse.shtml

[email protected]'s password:LC-rpm-d_42.bin 100% 758MB 1.7MB/s07:39

Copy complete, now saving to disk (please wait)...ch27#ch27#ch27# confEnter configuration commands, one per line. End with CNTL/Z.ch27(config)# boot nxos bootflash:LC-rpm-d_42.binPerforming image verification and compatibility check, please wait....ch27(config)# copy r s[########################################] 100%Copy complete.



ch27(config)#ch27(config)# reloadWARNING: AUTO_COPY_IN_PROGRESS. So, reload is not recommendedThis command will reboot the system. (y/n)? [n] nch27(config)# reloadWARNING: AUTO_COPY_IN_PROGRESS. So, reload is not recommendedThis command will reboot the system. (y/n)? [n]ch27(config)# reloadWARNING: AUTO_COPY_IN_PROGRESS. So, reload is not recommendedThis command will reboot the system. (y/n)? [n]ch27(config)# reloadWARNING: AUTO_COPY_IN_PROGRESS. So, reload is not recommendedThis command will reboot the system. (y/n)? [n]ch27(config)#ch27(config)#ch27(config)#ch27(config)#ch27(config)#ch27(config)#

ch27(config)# reloadWARNING: AUTO_COPY_IN_PROGRESS. So, reload is not recommendedThis command will reboot the system. (y/n)? [n]ch27(config)# reloadWARNING: AUTO_COPY_IN_PROGRESS. So, reload is not recommendedThis command will reboot the system. (y/n)? [n]ch27(config)#ch27(config)#ch27(config)# reloadWARNING: AUTO_COPY_IN_PROGRESS. So, reload is not recommendedThis command will reboot the system. (y/n)? [n]ch27(config)#ch27(config)#ch27(config)#ch27(config)# reloadWARNING: AUTO_COPY_IN_PROGRESS. So, reload is not recommendedThis command will reboot the system. (y/n)? [n]ch27(config)# reloadWARNING: AUTO_COPY_IN_PROGRESS. So, reload is not recommendedThis command will reboot the system. (y/n)? [n]ch27(config)# reloadThis command will reboot the system. (y/n)? [n]ch27(config)# reloadThis command will reboot the system. (y/n)? [n] y2016 Jun 16 17:17:56 ch27 %$ VDC-1 %$ %PLATFORM-2-PFM_SYSTEM_RESET:Manual system restart from Command Line Interface

DDDADA SWITCH Ver 8.26

DDDADA SWITCH Ver 8.26Memory Size (Bytes): 0x0000000080000000 + 0x0000000380000000Relocated to memoryTime: 6/16/2016 17:18:22Detected DDDADA IOFPGABooting from Primary BiosCode Signing Results: 0x0Using Upgrade FPGA



FPGA Revison : 0x27FPGA ID : 0x1168153FPGA Date : 0x20160111Reset Cause Register: 0x20Boot Ctrl Register : 0x60ffEventLog Register1 : 0xc2004000EventLog Register2 : 0xfbc77fffVersion 2.16.1240. Copyright (C) 2013 American Megatrends, Inc.Board type 1IOFPGA @ 0xe8000000SLOT_ID @ 0x1bStandalone chassischeck_bootmode: grub: Continue grubTrying to read config file /boot/grub/menu.lst.local from (hd0,4)Filesystem type is ext2fs, partition type 0x83

Booting bootflash:/LC-rpm-d_42.bin ...Booting bootflash:/LC-rpm-d_42.binTrying diskbootFilesystem type is ext2fs, partition type 0x83

IOFPGA ID: 1168153Image valid

Image Signature verification was Successful.

Boot Time: 6/16/2016 17:19:11INIT: version 2.88 bootingUnsquashing rootfs ...

Loading IGB driver ...Installing SSE module ... doneCreating the sse device node ... doneLoading I2C driver ...Installing CCTRL driver for card_type 3 ...CCTRL driver for card_index 21000 ...old data: 4000004 new data: 1Micron_M550_MTFDChecking SSD firmware ...

Model Number: Micron_M550_MTFDDAT064MAYSerial Number: MSA192805DVFirmware Revision: MU01

Checking all filesystems.......Installing default sprom values ...done.Configuring network ...Installing LC netdev ...

Installing psdev ...Installing veobc ...Installing OBFL driver ...mounting plog for N9k!tune2fs 1.42.1 (17-Feb-2012)Setting reserved blocks percentage to 0% (0 blocks)Starting portmap daemon...creating NFS state directory: donestarting 8 nfsd kernel threads: donestarting mountd: done



starting statd: doneSaving image for img-sync ...Loading system softwareInstalling local RPMSPatch Repository Setup completed successfullydealing with default shell..file /proc/cmdline found, look for shellunset shelltype, nothing to do..user add file found..edit itUncompressing system image: Thu Jun 16 17:19:39 UTC 2016blogger: nothing to do.

..done Thu Jun 16 17:19:39 UTC 2016Creating /dev/mcelogStarting mcelog daemonOverwriting dme stub libReplaced dme stub libINIT: Entering runlevel: 3Running S93thirdparty-script...

2016 Jun 16 17:19:59 ch27 %$ VDC-1 %$ %USER-0-SYSTEM_MSG: beforeaccess to bkout_cfg - clis2016 Jun 16 17:19:59 ch27 %$ VDC-1 %$ %USER-2-SYSTEM_MSG: platform.infentry not found - clis2016 Jun 16 17:20:00 ch27 %$ VDC-1 %$ %USER-2-SYSTEM_MSG: <<%USBHSD-2-MOUNT>> logflash: online - usbhsd2016 Jun 16 17:20:01 ch27 %$ VDC-1 %$ Jun 16 17:20:01 %KERN-2-SYSTEM_MSG: [ 13.357370] hwport mode=6 - kernel2016 Jun 16 17:20:03 ch27 %$ VDC-1 %$ %DAEMON-2-SYSTEM_MSG: <<%ASCII-CFG-2-CONF_CONTROL>> Binary restore - ascii-cfg[13553]2016 Jun 16 17:20:05 ch27 %$ VDC-1 %$ netstack: Registration with cliserver complete

2016 Jun 16 17:20:24 ch27 %$ VDC-1 %$ %USER-2-SYSTEM_MSG:ssnmgr_app_init called on ssnmgr up - aclmgr2016 Jun 16 17:20:30 ch27 %$ VDC-1 %$ %USER-0-SYSTEM_MSG: end ofdefault policer - copp2016 Jun 16 17:20:33 ch27 %$ VDC-1 %$ %CARDCLIENT-2-FPGA_BOOT_PRIMARY:IOFPGA booted from Primary

2016 Jun 16 17:20:38 ch27 %$ VDC-1 %$ %USER-2-SYSTEM_MSG: IPV6 Netlinkthread init successful - icmpv62016 Jun 16 17:20:38 ch27 %$ VDC-1 %$ %VDC_MGR-2-VDC_ONLINE: vdc 1 hascome online

User Access Verificationch27 login: adminPassword:Dddada Nexus Operating System (NX-OS) SoftwareTAC support: http://www.dddada.com/tacCopyright (C) 2002-2016, Dddada and/or its affiliates.All rights reserved.



The copyrights to certain works contained in this software areowned by other third parties and used and distributed under their ownlicenses, such as open source. This software is provided "as is," andunlessotherwise stated, there is no warranty, express or implied, includingbut notlimited to warranties of merchantability and fitness for a particularpurpose.Certain components of this software are licensed underthe GNU General Public License (GPL) version 2.0 orGNU General Public License (GPL) version 3.0 or the GNULesser General Public License (LGPL) Version 2.1 orLesser General Public License (LGPL) Version 2.0.A copy of each such license is available athttp://www.opensource.org/licenses/gpl-2.0.php andhttp://opensource.org/licenses/gpl-3.0.html andhttp://www.opensource.org/licenses/lgpl-2.1.php andhttp://www.gnu.org/licenses/old-licenses/library.txt.ch27#ch27#

ch27# sh moduleMod Ports Module-Type ModelStatus--- ----- ------------------------------------- --------------------- ---------27 0 Supervisor Module N9K-SUP-Aactive *

Mod Sw Hw Slot--- ---------------- ------ ----27 7.0(3)I4(1.42) 1.5 SUP1

Mod MAC-Address(es) Serial-Num--- -------------------------------------- ----------27 64-f6-9d-07-45-6e to 64-f6-9d-07-45-7f SAL1932LTQ6

Mod Online Diag Status--- ------------------27 Pass

Waiting for System Controller to detect all other modules...

* this terminal sessionch27#ch27# sh module

Mod Ports Module-Type ModelStatus--- ----- ------------------------------------- --------------------- ---------27 0 Supervisor Module N9K-SUP-Aactive *







* this terminal session2016 Jun 16 17:20:56 ch27 %$ VDC-1 %$ %VMAN-2-ACTIVATION_STATE:Successfully activated virtual service 'guestshell+'2016 Jun 16 17:20:56 ch27 %$ VDC-1 %$ %VMAN-2-GUESTSHELL_ENABLED: Theguest shell has been enabled. The command 'guestshell' may be used toaccess it, 'guestshell destroy' to remove it.ch27#

ch27#ch27# sh moduleMod Ports Module-Type ModelStatus--- ----- ------------------------------------- --------------------- ---------27 0 Supervisor Module N9K-SUP-Aactive *





* this terminal sessionch27# 2016 Jun 16 17:21:19 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT:

Detected the presence of Module 22016 Jun 16 17:21:19 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 32016 Jun 16 17:21:19 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 42016 Jun 16 17:21:19 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 222016 Jun 16 17:21:19 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:21:19 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detected



the presence of Module 282016 Jun 16 17:21:19 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 292016 Jun 16 17:21:19 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 302016 Jun 16 17:21:19 ch27 %$ VDC-1 %$ %PLATFORM-2-PS_OK: Power supply 1ok (Serial number DTM192905Q9)2016 Jun 16 17:21:19 ch27 %$ VDC-1 %$ %PLATFORM-2-PS_FANOK: Fan inPower supply 1 ok2016 Jun 16 17:21:19 ch27 %$ VDC-1 %$ %PLATFORM-2-PS_FAIL: Power supply2 failed or shut down (Serial number DTM192905SY)2016 Jun 16 17:21:19 ch27 %$ VDC-1 %$ %PLATFORM-2-PS_ABSENT: Powersupply 2 is absent/shutdown, ps-redundancy might be affected2016 Jun 16 17:21:19 ch27 %$ VDC-1 %$ %PLATFORM-2-PS_ABSENT: Powersupply 3 is absent/shutdown, ps-redundancy might be affected2016 Jun 16 17:21:19 ch27 %$ VDC-1 %$ %PLATFORM-2-PS_ABSENT: Powersupply 4 is absent/shutdown, ps-redundancy might be affected2016 Jun 16 17:21:19 ch27 %$ VDC-1 %$ %PLATFORM-2-PS_RED_MODE_CHG:Power supply operational redundancy mode changed to non-redundant2016 Jun 16 17:21:19 ch27 %$ VDC-1 %$ %PLATFORM-2-FANMOD_FAN_OK: Fan

module 1 (Fan1(sys_fan1) fan) ok2016 Jun 16 17:21:19 ch27 %$ VDC-1 %$ %PLATFORM-2-FANMOD_FAN_OK: Fanmodule 2 (Fan2(sys_fan2) fan) ok2016 Jun 16 17:21:19 ch27 %$ VDC-1 %$ %PLATFORM-2-FANMOD_FAN_OK: Fanmodule 3 (Fan3(sys_fan3) fan) ok2016 Jun 16 17:21:19 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_DETECT: Module 29detected (Serial number SAL1933MHHH) Module-Type System ControllerModel N9K-SC-A2016 Jun 16 17:21:19 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PWRUP: Module 29powered up (Serial number SAL1933MHHH)2016 Jun 16 17:21:19 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_DETECT: Module 30detected (Serial number SAL1933MHD1) Module-Type System ControllerModel N9K-SC-A2016 Jun 16 17:21:19 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PWRUP: Module 30powered up (Serial number SAL1933MHD1)2016 Jun 16 17:21:19 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_DETECT: Module 28detected (Serial number :unavailable) Module-Type Supervisor ModuleModel :unavailable2016 Jun 16 17:21:28 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_DETECT: Module 22detected (Serial number SAL1941QTXL) Module-Type 4-slot Fabric ModuleModel N9K-C9504-FM-E2016 Jun 16 17:21:28 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PWRUP: Module 22powered up (Serial number SAL1941QTXL)2016 Jun 16 17:21:31 ch27 %$ VDC-1 %$ %PLATFORM-2-MODULE_EJECTOR_POLICY_ENABLED: All Ejectors closed for module 2.Ejector based shutdown enabled2016 Jun 16 17:21:31 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_DETECT: Module 2

detected (Serial number SAL1943RL0V) Module-Type 36x100G EthernetModule Model N9K-X9736C-E2016 Jun 16 17:21:31 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PWRDN: Module 2powered down (Serial number SAL1943RL0V)2016 Jun 16 17:21:39 ch27 %$ VDC-1 %$ %PLATFORM-2-MODULE_EJECTOR_POLICY_ENABLED: All Ejectors closed for module 4.Ejector based shutdown enabled2016 Jun 16 17:21:40 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_DETECT: Module 4detected (Serial number SAL2009ZNT2) Module-Type 32x100G EthernetModule Model N9K-X9732C-EX



2016 Jun 16 17:21:40 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PWRUP: Module 4powered up (Serial number SAL2009ZNT2)2016 Jun 16 17:21:48 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_DETECT: Module 24detected (Serial number SAL1941QTXW) Module-Type 4-slot Fabric ModuleModel N9K-C9504-FM-E2016 Jun 16 17:21:48 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PWRUP: Module 24powered up (Serial number SAL1941QTXW)2016 Jun 16 17:21:48 ch27 %$ VDC-1 %$ %PLATFORM-2-MODULE_EJECTOR_POLICY_ENABLED: All Ejectors closed for module 3.Ejector based shutdown enabled2016 Jun 16 17:21:49 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_DETECT: Module 3detected (Serial number SAL2004XTWV) Module-Type 36x100G EthernetModule Model N9K-X9736C-EX2016 Jun 16 17:21:49 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PWRUP: Module 3powered up (Serial number SAL2004XTWV)2016 Jun 16 17:22:30 ch27 %$ VDC-1 %$ %USBHSD-STANDBY-2-MOUNT:logflash: online

ch27#ch27#

ch27# sh moduleMod Ports Module-Type ModelStatus--- ----- ------------------------------------- --------------------- ---------2 36 36x100G Ethernet Module N9K-X9736C-Epowered-dn3 36 36x100G Ethernet Module N9K-X9736C-EXfailure4 32 32x100G Ethernet Modulepwr-cycld22 0 4-slot Fabric Modulepwr-cycld24 0 4-slot Fabric Module N9K-C9504-FM-Etesting27 0 Supervisor Module N9K-SUP-Aactive *28 0 Supervisor Module N9K-SUP-Aha-standby29 0 System Controller N9K-SC-Aactive30 0 System Controller N9K-SC-Astandby


3 pwr-cycld Unknown. Issue show system reset mod ...4 pwr-cycld Unknown. Issue show system reset mod ...22 pwr-cycld Unknown. Issue show system reset mod ...

Mod Sw Hw Slot--- ---------------- ------ ----3 7.0(3)I4(1.25) 0.1010 LC324 7.0(3)I4(1.25) 0.1010 FM4ch27# attach console module 2016 Jun 16 17:27:07 ch27 %$ VDC-1 %$%PLATFORM-2-MOD_REMOVE: Module 24 removed (Serial number SAL1941QTXW)



2016 Jun 16 17:27:08 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 244Connecting to console of mod 4 ...ConnectedEscape character is '~,' [tilde comma]Memory: 0x7F800000 + 0x1800000002016 Jun 16 17:27:19 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)2016 Jun 16 17:27:19 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 24Reserving 1028MB PCIMEM Space for port 0:3.0Reserving 0MB PCIMEM Space for port 0:4.0Detected DDDADA IOFPGACode Signing Results: 0x0

Using Golden FPGABooting from Golden BiosFPGA Revison : 0x5FPGA ID : 0x1548051

FPGA Date : 0x20160219Power Debug Register: 0xfa1f8000Reset Cause Register: 0x53cBoot Ctrl Register : 0x10ffFPGA Update Status : 0x0Detected DDDADA MIFPGAMIFPGA Update Status : 0x20Version 2.17.1245. Copyright (C) 2016 American Megatrends, Inc.IOFPGA at 0x88000000loader initialising devices...INTEL 0x7d3ee908 has EEPROM MAC address00:00:00:04:00:01 (port 0)INTEL 0x7d3ef228 has EEPROM MAC address 00:a0:c9:00:00:01 (port 1)INTEL 0x7d3f0788 has EEPROM MAC address 00:a0:c9:00:00:02 (port 2)INTEL 0x7d3f1c68 has EEPROM MAC address 00:00:00:04:00:01 (port 0)INTEL 0x7d3f1c68 has EEPROM MAC address 00:a0:c9:00:00:01 (port 1)INTEL 0x7d3f1c68 has EEPROM MAC address 00:a0:c9:00:00:02 (port 2)ok

-- Loader Version DDDADA_VERSION --Features: FTP TFTP bzImage dddada_nbi

retimer tuningEOBC SW Identity: maj 0xd3d30, min 0x11abSMI write back failed, reg 0x58, exp 0x9f4002, read 0x1a4002Checking CPU port status... :Port 0 is DOWN.

ATOM LC card MVDXN41 configTrying LOCAL SC Path ..Enabling port 7 Disabling port 8Port 6 is UP.Port 7 is UP.Port 8 is DOWN."DHCP STARTED"Configuring (net0 00:00:00:04:00:01)...... okIP address: 127.1.2.4Subnet mask: 255.255.0.0Server: 127.1.1.27



ftp://ftpuser:***@127.1.1.27//var/sysmgr/ftp/sflc_x86.img... okERROR: bzImage 0x7d3f21a8 bad syssize 0 (expected a1cb80)DDDADA_NBI imagecinbi_process_segments: Processing DDDADA NBI segmentscinbi_load_segment: Processing segment. Tag 17 memsz 1024 filesz 512offset 512cinbi_load_segment: Setting kernel cmdline to console=ttyS1,115200n8nncard_index=21105 loader_ver="3.23" bootdev=eobc server_ip=127.1.1.27debug rw root=/dev/ram0 rdbase=0x8000000 ip=off ramdisk_size=131072panic=5 coredump_filter=0xb mtdparts=physmap-flash.0:256k(SM_LOG),256k(RR_LOG),2561m(mtdoops),16m(KTRACES),18m(PLOG)intel_idle.max_cstate=2 pcie_ports=native nopat processor.max_cstate=0sanos_debug=7 earlyprintk=serial,ttyS1,115200 kgdboc=ttyS1,B noquietdebug_rc_scripts=1 pdebug=1 server_ip=127.1.1.27cinbi_load_segment: Setting ker2016 Jun 16 17:27:30 ch27 %$ VDC-1 %$%PLATFORM-2-MOD_REMOVE: Module 24 removed (Serial number SAL1941QTXW)2016 Jun 16 17:27:30 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 24nel cmdline to console=ttyS1,115200n8nn card_index=21105loader_ver="3.23" bootdev=eobc server_ip=127.1.1.27 debug rw

root=/dev/ram0 rdbase=0x8000000 ip=off ramdisk_size=131072 panic=5coredump_filter=0xb mtdparts=physmap-flash.0:256k(SM_LOG),256k(RR_LOG),256k(KLOG),1m(mtdoops),16m(KTRACES),18m(PLOG) intel_idle.max_cstate=2 pcie_ports=native nopatprocessor.max_cstate=0 sanos_debug=7 earlyprintk=serial,ttyS1,115200kgdboc=ttyS1,B noquiet debug_rc_scripts=1 pdebug=1 server_ip=127.1.1.27cinbi_process_segments: Segment Size 512 Current offset 1024cinbi_load_segment: Processing segment. Tag 20 memsz 8388608 filesz5273088 offset 1024Registered kernel image 0x35e2f000cinbi_load_segment: Setting kernel cmdline to console=ttyS1,115200n8nncard_index=21105 loader_ver="3.23" bootdev=eobc server_ip=127.1.1.27debug rw root=/dev/ram0 rdbase=0x8000000 ip=off ramdisk_size=131072panic=5 coredump_filter=0xb mtdparts=physmap-flash.0:256k(SM_LOG),256k(RR_LOG),256k(KLOG),1m(mtdoops),16m(KTRACES),18m(PLOG) intel_idle.max_cstate=2 pcie_ports=native nopatprocessor.max_cstate=0 sanos_debug=7 earlyprintk=serial,ttyS1,115200kgdboc=ttyS1,B noquiet debug_rc_scripts=1 pdebug=1 server_ip=127.1.1.27cinbi_load_segment: Found kernelcinbi_process_segments: Segment Size 5273088 Current offset 5274112cinbi_load_segment: Processing segment. Tag 21 memsz 268435456 filesz164380672 offset 5274112Registered initrd image 0x35e2d000cinbi_load_segment: Found initrdcinbi_process_segments: Segment Size 164380672 Current offset 169654784cinbi_load_segment: Processing segment. Tag 22 memsz 2048 filesz 2048offset 169654784

cinbi_load_segment: Found Vendor SegReading data for vendor seg. Length 2048

Invalid image: swid-lc-eSWID of image swid-lc-e. Expected (swid-sflc)ERROR: Bad swidcinbi_process_segments: Segment Size 2048 Current offset 169656832cinbi_exec: Done processing segmentscinbi_exec: Verifying signatureIMAGE SIGNATURE NOT FOUND



cinbi_exec: Unregistering DDDADA NBI image 0x7d3f21a8cinbi_exec: Calling bzimage probeGood bzImage 0x35e2f000 version 020b RM 0x3e00 PM 0x503800 cmdlen 2047mem_limit 0x7fffffff cinbi_exec: Calling bzimage execGood bzImage 0x35e2f000 version 020b RM 0x3e00 PM 0x503800 cmdlen 2047mem_limit 0x7fffffff bzimage_exec: cmdline is console=ttyS1,115200n8nn card_index=21105loader_ver="3.23" bootdev=eobc server_ip=127.1.1.27 debug rwroot=/dev/ram0 rdbase=0x8000000 ip=off ramdisk_size=131072 panic=5coredump_filter=0xb mtdparts=physmap-flash.0:256k(SM_LOG),256k(RR_LOG),256k(KLOG),1m(mtdoops),16m(KTRACES),18m(PLOG) intel_idle.max_cstate=2 pcie_ports=native nopatprocessor.max_cstate=0 sanos_debug=7 earlyprintk=serial,ttyS1,115200kgdboc=ttyS1,B noquiet debug_rc_scripts=1 pdebug=1 server_ip=127.1.1.27bzImage 0x35e2f000 initrd 0x35e2d000 (<INITRD>) from[0x3633aa00,0x3fffea00) Unregister image 0x35e2f000linux real_size = 0x2000, prot_size = 0x504000 efi_memmap physical_start = 0x8000, physical_end = 0x40000

bzimage trying to allocate 2 pages at 0x3e000 for holding real modekernelTrying to allocate 0x504 pages for VMLINUZ Allocated prot_mode_mem 0x35924000 real_mode_mem 0x3e000 Efi Systable: 0x7f61ff18 Image Hande: 0x7e5ca498EFI memamp buf 0x35e29000 size 0x630bzimage_load_initrds: image 0x35e2f000bzImage 0x35e2f000 loading initrds from 0x77ffffff downwards Considering initrd 0x35e2d000 (<INITRD>)loading Initrd at 6e33bfff size 09cc4000copy initrd 0x35e2d000 to 0x6e33bfff len 0x09cc4000 src0x27633c000)bzImage 0x35e2f000 initrd 0x35e2d000 [0x6e33bfff,0x6e33bfff,0x77ffffff) loading Initrd at 6e33bfff size 09cc4000bzImage 0x35e2f000 initrds at [0x6e33bfff,0x77ffffff) 2016 Jun 16 17:27:41 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)2016 Jun 16 17:27:41 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 24[ 0.000000] Reserving ebda at 0x9f000 Len 0x61000[ 0.000000] [ 0] Initializing cgroup subsys cpuset[ 0.000000] [ 0] Initializing cgroup subsys cpu[ 0.000000] [ 0] Linux version 3.4.91-WR5.0.1.13_standard+(fas@ins-sw-bld62) (gcc version 4.6.3 (Wind River Linux SourceryCodeBench 4.6-60) ) #1 SMP Mon May 30 21:05:39 PDT 2016[ 0.000000] [ 0] Card Index: 21105 3k Card: 0[ 0.000000] [ 0] Command line: console=ttyS1,115200n8nncard_index=21105 loader_ver="3.23" bootdev=eobc server_ip=127.1.1.27

debug rw root=/dev/ram0 rdbase=0x8000000 ip=off ramdisk_size=131072panic=5 coredump_filter=0xb mtdparts=physmap-flash.0:256k(SM_LOG),256k(RR_LOG),256k(KLOG),1m(mtdoops),16m(KTRACES),18m(PLOG) intel_idle.max_cstate=2 pcie_ports=native nopatprocessor.max_cstate=0 sanos_debug=7 earlyprintk=serial,ttyS1,115200kgdboc=ttyS1,B noquiet debug_rc_scripts=1 pdebug=1 server_ip=127.1.1.27[ 0.000000] [ 0] efi: EFI memmap phys_map at 0000000035e29000[ 0.000000] [ 0] e820: BIOS-provided physical RAM map:[ 0.000000] [ 0] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable



[ 0.000000] [ 0] BIOS-e820: [mem 0x0000000000100000-0x000000007d46ffff] usable[ 0.000000] [ 0] BIOS-e820: [mem 0x000000007d470000-0x000000007d4b3fff] ACPI NVS[ 0.000000] [ 0] BIOS-e820: [mem 0x000000007d4b4000-0x000000007d4d0fff] reserved[ 0.000000] [ 0] BIOS-e820: [mem 0x000000007d4d1000-0x000000007d9d0fff] ACPI NVS[ 0.000000] [ 0] BIOS-e820: [mem 0x000000007d9d1000-0x000000007da5ffff] reserved[ 0.000000] [ 0] BIOS-e820: [mem 0x000000007da60000-0x000000007f55ffff] usable[ 0.000000] [ 0] BIOS-e820: [mem 0x000000007f560000-0x000000007f58ffff] reserved[ 0.000000] [ 0] BIOS-e820: [mem 0x000000007f590000-0x000000007f5d5fff] usable[ 0.000000] [ 0] BIOS-e820: [mem 0x000000007f5d6000-0x000000007f5fffff] ACPI NVS[ 0.000000] [ 0] BIOS-e820: [mem 0x000000007f600000-0x000000007f64ffff] reserved

[ 0.000000] [ 0] BIOS-e820: [mem 0x000000007f650000-0x000000007f7fffff] usable[ 0.000000] [ 0] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved[ 0.000000] [ 0] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed03fff] reserved[ 0.000000] [ 0] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved[ 0.000000] [ 0] BIOS-e820: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved[ 0.000000] [ 0] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved[ 0.000000] [ 0] BIOS-e820: [mem 0x00000000fef00000-0x00000000feffffff] reserved[ 0.000000] [ 0] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved[ 0.000000] [ 0] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable[ 0.000000] [ 0] PAT support disabled.[ 0.000000] [ 0] bootconsole [earlyser0] enabled[ 0.000000] [ 0] NX (Execute Disable) protection: active[ 0.000000] [ 0] efi: EFI systab64 at phys 000000007f61ff18[ 0.000000] [ 0] efi: efi_systab.runtime at 7f61fe18[ 0.000000] [ 0] efi: efi_systab.tables at 7f61ee18[ 0.000000] [ 0] efi: EFI v2.31 by American Megatrends[ 0.000000] [ 0] efi: ACPI=0x7f5d6000 ACPI 2.0=0x7f5d6000SMBIOS=0xf0560 MPS=0xfd5f0

[ 0.000000] [ 0] efi: mem00: type=3, attr=0xf,range=[0x0000000000000000-0x0000000000008000) (0MB)[ 0.000000] [ 0] efi: mem01: type=7, attr=0xf,range=[0x0000000000008000-0x000000000003d000) (0MB)[ 0.000000] [ 0] efi: mem02: type=2, attr=0xf,range=[0x000000000003d000-0x0000000000040000) (0MB)[ 0.000000] [ 0] efi: mem03: type=3, attr=0xf,range=[0x0000000000040000-0x00000000000a0000) (0MB)[ 0.000000] [ 0] efi: mem04: type=7, attr=0xf,range=[0x0000000000100000-0x0000000000200000) (1MB)



[ 0.000000] [ 0] efi: mem05: type=4, attr=0xf,range=[0x0000000000200000-0x0000000000240000) (0MB)[ 0.000000] [ 0] efi: mem06: type=7, attr=0xf,range=[0x0000000000240000-0x0000000035923000) (854MB)[ 0.000000] [ 0] efi: mem07: type=2, attr=0xf,range=[0x0000000035923000-0x0000000040000000) (166MB)[ 0.000000] [ 0] efi: mem08: type=7, attr=0xf,range=[0x0000000040000000-0x000000007d3c6000) (979MB)[ 0.000000] [ 0] efi: mem09: type=1, attr=0xf,range=[0x000000007d3c6000-0x000000007d470000) (0MB)[ 0.000000] [ 0] efi: mem10: type=10, attr=0xf,range=[0x000000007d470000-0x000000007d4b4000) (0MB)[ 0.000000] [ 0] efi: mem11: type=6, attr=0x800000000000000f,range=[0x000000007d4b4000-0x000000007d4d1000) (0MB)[ 0.000000] [ 0] efi: mem12: type=10, attr=0xf,range=[0x000000007d4d1000-0x000000007d9d1000) (5MB)[ 0.000000] [ 0] efi: mem13: type=6, attr=0x800000000000000f,range=[0x000000007d9d1000-0x000000007d9f2000) (0MB)[ 0.000000] [ 0] efi: mem14: type=5, attr=0x800000000000000f,range=[0x000000007d9f2000-0x000000007da00000) (0MB)

[ 0.000000] [ 0] efi: mem15: type=6, attr=0x800000000000000f,range=[0x000000007da00000-0x000000007da60000) (0MB)[ 0.000000] [ 0] efi: mem16: type=4, attr=0xf,range=[0x000000007da60000-0x000000007ef60000) (21MB)[ 0.000000] [ 0] efi: mem17: type=7, attr=0xf,range=[0x000000007ef60000-0x000000007f355000) (3MB)[ 0.000000] [ 0] efi: mem18: type=3, attr=0xf,range=[0x000000007f355000-0x000000007f560000) (2MB)[ 0.000000] [ 0] efi: mem19: type=0, attr=0xf,range=[0x000000007f560000-0x000000007f590000) (0MB)[ 0.000000] [ 0] efi: mem20: type=7, attr=0xf,range=[0x000000007f590000-0x000000007f5d6000) (0MB)[ 0.000000] [ 0] efi: mem21: type=10, attr=0xf,range=[0x000000007f5d6000-0x000000007f600000) (0MB)[ 0.000000] [ 0] efi: mem22: type=6, attr=0x800000000000000f,range=[0x000000007f600000-0x000000007f620000) (0MB)[ 0.000000] [ 0] efi: mem23: type=5, attr=0x800000000000000f,range=[0x000000007f620000-0x000000007f650000) (0MB)[ 0.000000] [ 0] efi: mem24: type=4, attr=0xf,range=[0x000000007f650000-0x000000007f800000) (1MB)[ 0.000000] [ 0] efi: mem25: type=7, attr=0xf,range=[0x0000000100000000-0x0000000280000000) (6144MB)[ 0.000000] [ 0] efi: mem26: type=11, attr=0x8000000000000001,range=[0x00000000e0000000-0x00000000e4000000) (64MB)[ 0.000000] [ 0] efi: mem27: type=11, attr=0x8000000000000001,range=[0x00000000fed01000-0x00000000fed04000) (0MB)[ 0.000000] [ 0] efi: mem28: type=11, attr=0x8000000000000001,

range=[0x00000000fed08000-0x00000000fed09000) (0MB)[ 0.000000] [ 0] efi: mem29: type=11, attr=0x8000000000000001,range=[0x00000000fed0c000-0x00000000fed10000) (0MB)[ 0.000000] [ 0] efi: mem30: type=11, attr=0x8000000000000001,range=[0x00000000fed1c000-0x00000000fed1d000) (0MB)[ 0.000000] [ 0] efi: mem31: type=11, attr=0x8000000000000001,range=[0x00000000fef00000-0x00000000ff000000) (1MB)[ 0.000000] [ 0] efi: mem32: type=11, attr=0x8000000000000001,range=[0x00000000ff800000-0x0000000100000000) (8MB)[ 0.000000] [ 0] SMBIOS 2.8 present.



[ 0.000000] [ 0] DMI: To be filled by O.E.M. To be filled byO.E.M./To be filled by O.E.M., BIOS 5.6.5 02/18/2016[ 0.000000] [ 0] e820: update [mem 0x00000000-0x0000ffff] usable==> reserved[ 0.000000] [ 0] e820: remove [mem 0x000a0000-0x000fffff] usable[ 0.000000] [ 0] No AGP bridge found[ 0.000000] [ 0] e820: last_pfn = 0x280000 max_arch_pfn =0x400000000[ 0.000000] [ 0] MTRR default type: write-back[ 0.000000] [ 0] MTRR fixed ranges enabled:[ 0.000000] [ 0] 00000-9FFFF write-back[ 0.000000] [ 0] A0000-BFFFF uncachable[ 0.000000] [ 0] C0000-FFFFF write-protect[ 0.000000] [ 0] MTRR variable ranges enabled:[ 0.000000] [ 0] 0 base 080000000 mask F80000000 uncachable[ 0.000000] [ 0] 1 base 280000000 mask F80000000 uncachable[ 0.000000] [ 0] 2 base 300000000 mask F00000000 uncachable[ 0.000000] [ 0] 3 base 400000000 mask C00000000 uncachable[ 0.000000] [ 0] 4 base 800000000 mask 800000000 uncachable[ 0.000000] [ 0] 5 base 07F800000 mask FFF800000 uncachable

[ 0.000000] [ 0] 6 disabled[ 0.000000] [ 0] 7 disabled[ 0.000000] [ 0] e820: last_pfn = 0x7f800 max_arch_pfn =0x400000000[ 0.000000] [ 0] found SMP MP-table at [ffff8800000fd850] fd850[ 0.000000] [ 0] initial memory mapped : 0 - 20000000[ 0.000000] [ 0] Base memory trampoline at [ffff88000009d000]9d000 size 8192[ 0.000000] [ 0] init_memory_mapping: 0000000000000000-000000007f800000[ 0.000000] [ 0] 0000000000 - 007f800000 page 2M[ 0.000000] [ 0] kernel direct mapping tables up to 0x7f7fffff @[mem 0x1fffd000-0x1fffffff][ 0.000000] [ 0] init_memory_mapping: 0000000100000000-0000000280000000[ 0.000000] [ 0] 0100000000 - 0280000000 page 2M[ 0.000000] [ 0] kernel direct mapping tables up to 0x27fffffff @[mem 0x7f5cf000-0x7f5d5fff][ 0.000000] [ 0] RAMDISK: 6e33bfff - 78000000[ 0.000000] [ 0] ACPI: RSDP 000000007f5d6000 00024 (v02 ALASKA)[ 0.000000] [ 0] ACPI: XSDT 000000007f5d6078 00074 (v01 ALASKAA M I 01072009 AMI 00010013)[ 0.000000] [ 0] ACPI: FACP 000000007f5d8248 0010C (v05 ALASKAA M I 01072009 AMI 00010013)[ 0.000000] [ 0] ACPI: DSDT 000000007f5d6188 020BC (v02 ALASKAA M I 01072009 INTL 20061109)[ 0.000000] [ 0] ACPI: FACS 000000007f5fdf80 00040

[ 0.000000] [ 0] ACPI: FPDT 000000007f5d8358 00044 (v01 ALASKAA M I 01072009 AMI 00010013)[ 0.000000] [ 0] ACPI: FIDT 000000007f5d83a0 0009C (v01 ALASKAA M I 01072009 AMI 00010013)[ 0.000000] [ 0] ACPI: MCFG 000000007f5d8440 0003C (v01 ALASKAA M I 01072009 MSFT 00000097)[ 0.000000] [ 0] ACPI: UEFI 000000007f5d8480 00042 (v0100000000 00000000)[ 0.000000] [ 0] ACPI: APIC 000000007f5d84c8 00078 (v03 INTELTIANO 00000001 MSFT 00000000)



[ 0.000000] [ 0] ACPI: BDAT 000000007f5d8540 00030 (v0100000000 00000000)[ 0.000000] [ 0] ACPI: HPET 000000007f5d8570 00038 (v01 INTEL00000001 MSFT 01000013)[ 0.000000] [ 0] ACPI: SSDT 000000007f5d85a8 009F1 (v01 PmRefCpuPm 00003000 INTL 20061109)[ 0.000000] [ 0] ACPI: SPCR 000000007f5d8fa0 00050 (v01 A M IAPTIO V 01072009 AMI. 00000005)[ 0.000000] [ 0] ACPI: Local APIC address 0xfee00000[ 0.000000] [ 0] Zone PFN ranges:[ 0.000000] [ 0] DMA 0x00000010 -> 0x00001000[ 0.000000] [ 0] DMA32 0x00001000 -> 0x00100000[ 0.000000] [ 0] Normal 0x00100000 -> 0x00280000[ 0.000000] [ 0] Movable zone start PFN for each node[ 0.000000] [ 0] Early memory PFN ranges[ 0.000000] [ 0] 0: 0x00000010 -> 0x000000a0[ 0.000000] [ 0] 0: 0x00000100 -> 0x0007d470[ 0.000000] [ 0] 0: 0x0007da60 -> 0x0007f560[ 0.000000] [ 0] 0: 0x0007f590 -> 0x0007f5d6[ 0.000000] [ 0] 0: 0x0007f650 -> 0x0007f800

[ 0.000000] [ 0] 0: 0x00100000 -> 0x00280000[ 0.000000] [ 0] On node 0 totalpages: 2093302[ 0.000000] [ 0] DMA zone: 64 pages used for memmap[ 0.000000] [ 0] DMA zone: 67 pages reserved[ 0.000000] [ 0] DMA zone: 3853 pages, LIFO batch:0[ 0.000000] [ 0] DMA32 zone: 16320 pages used for memmap[ 0.000000] [ 0] DMA32 zone: 500134 pages, LIFO batch:31[ 0.000000] [ 0] Normal zone: 24576 pages used for memmap[ 0.000000] [ 0] Normal zone: 1548288 pages, LIFO batch:31[ 0.000000] [ 0] ACPI: PM-Timer IO Port: 0x408[ 0.000000] [ 0] ACPI: Local APIC address 0xfee00000[ 0.000000] [ 0] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00]enabled)[ 0.000000] [ 0] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02]enabled)[ 0.000000] [ 0] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04]enabled)[ 0.000000] [ 0] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06]enabled)[ 0.000000] [ 0] ACPI: LAPIC_NMI (acpi_id[0x01] high edgelint[0x1])[ 0.000000] [ 0] ACPI: LAPIC_NMI (acpi_id[0x02] high edgelint[0x1])[ 0.000000] [ 0] ACPI: IOAPIC (id[0x02] address[0xfec00000]gsi_base[0])[ 0.000000] [ 0] IOAPIC[0]: apic_id 2, version 32, address0xfec00000, GSI 0-23

2016 Jun 16 17:27:52 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)

[ 0.000000] [ 0] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9high level)[ 0.000000] [ 0] ACPI: IRQ0 used by override.[ 0.000000] [ 0] ACPI: IRQ2 used by override.[ 0.000000] [ 0] ACPI: IRQ9 used by override.[ 0.000000] [ 0] Using ACPI (MADT) for SMP configurationinformation



[ 0.000000] [ 0] ACPI: HPET id: 0x8086a201 base: 0xfed00000[ 0.000000] [ 0] SMP: Allowing 4 CPUs, 0 hotplug CPUs[ 0.000000] [ 0] nr_irqs_gsi: 40[ 0.000000] [ 0] e820: [mem 0x7f800000-0xdfffffff] available forPCI devices[ 0.000000] [ 0] Booting paravirtualized kernel on bare hardware[ 0.000000] [ 0] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32nr_cpu_ids:4 nr_node_ids:1[ 0.000000] [ 0] PERCPU: Embedded 26 pages/cpu @ffff88027fc00000s74496 r8192 d23808 u524288[ 0.000000] [ 0] pcpu-alloc: s74496 r8192 d23808 u524288alloc=1*2097152[ 0.000000] [ 0] pcpu-alloc: [0] 0 1 2 3[ 0.000000] [ 0] Built 1 zonelists in Zone order, mobilitygrouping on. Total pages: 2052275[ 0.000000] [ 0] Kernel command line: console=ttyS1,115200n8nncard_index=21105 loader_ver="3.23" bootdev=eobc server_ip=127.1.1.27debug rw root=/dev/ram0 rdbase=0x8000000 ip=off ramdisk_size=131072panic=5 coredump_filter=0xb mtdparts=physmap-flash.0:256k(SM_LOG),256k(RR_LOG),256k(KLOG),1m(mtdoops),16m(KTRACES),1

8m(PLOG) intel_idle.max_cstate=2 pcie_ports=native nopatprocessor.max_cstate=0 sanos_debug=7 earlyprintk=serial,ttyS1,115200kgdboc=ttyS1,B noquiet debug_rc_scripts=1 pdebug=1 server_ip=127.1.1.27[ 0.000000] [ 0] PID hash table entries: 4096 (order: 3, 32768bytes)[ 0.000000] [ 0] Dentry cache hash table entries: 1048576 (order:11, 8388608 bytes)[ 0.000000] [ 0] Inode-cache hash table entries: 524288 (order:10, 4194304 bytes)[ 0.000000] [ 0] Checking aperture...[ 0.000000] [ 0] No AGP bridge found[ 0.000000] [ 0] Memory: 7962124k/10485760k available (7165kkernel code, 2112552k absent, 411084k reserved, 6044k data, 708k init)[ 0.000000] [ 0] SLUB: Genslabs=15, HWalign=64, Order=0-3,MinObjects=0, CPUs=4, Nodes=1[ 0.000000] [ 0] Hierarchical RCU implementation.[ 0.000000] [ 0] NR_IRQS:4352 nr_irqs:712 16[ 0.000000] [978307223] Console: colour dummy device 80x25[ 0.000000] [978307223] console [ttyS1] enabled, bootconsoledisabled[ 0.000000] [978307223] console [ttyS1] enabled, bootconsoledisabled[ 0.000000] [978307223] allocated 33554432 bytes of page_cgroup[ 0.000000] [978307223] please try 'cgroup_disable=memory' option ifyou don't want memory cgroups[ 0.000000] [978307223] hpet clockevent registered[ 0.003333] [978307223] Fast TSC calibration using PIT

[ 0.006666] [978307223] Detected 2400.097 MHz processor.[ 0.000006] [978307223] Calibrating delay loop (skipped), valuecalculated using timer frequency.. 4802.20 BogoMIPS (lpj=8000323)[ 0.013055] [978307223] pid_max: default: 32768 minimum: 301[ 0.039031] [978307223] Security Framework initialized[ 0.044804] [978307223] Smack: Initializing.[ 0.049870] [978307223] Mount-cache hash table entries: 256[ 0.059107] [978307223] Initializing cgroup subsys debug[ 0.065060] [978307223] Initializing cgroup subsys cpuacct[ 0.071199] [978307223] Initializing cgroup subsys memory



[ 0.077446] [978307223] Initializing cgroup subsys devices[ 0.083608] [978307223] Initializing cgroup subsys freezer[ 0.089758] [978307223] Initializing cgroup subsys perf_event[ 0.096203] [978307223] Initializing cgroup subsys tasks[ 0.102424] [978307223] CPU: Physical Processor ID: 0[ 0.108078] [978307223] CPU: Processor Core ID: 0[ 0.113344] [978307223] ENERGY_PERF_BIAS: Set to 'performance' forturbo, was 4[ 0.125521] [978307223] mce: CPU supports 6 MCE banks[ 0.131209] [978307223] CPU0: Thermal monitoring enabled (TM1)[ 0.137735] [978307223] CMCI not supported[ 0.142419] [978307223] using mwait in idle threads.[ 0.149680] 2016 Jun 16 17:27:52 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detected the presence of Module 24[978307223] ACPI: Core revision 20120320[ 0.263458] [978307223] ftrace: allocating 24945 entries in 98 pages[ 0.299597] [978307223] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1pin2=-1[ 0.340438] [978307223] CPU0: Intel(R) Atom(TM) CPU C2558 @2.40GHz stepping 08

[ 0.453901] [978307223] Performance Events: no PEBS fmt2+, genericarchitected perfmon, Intel PMU driver.[ 0.464640] [978307223] ... version: 3[ 0.470283] [978307223] ... bit width: 40[ 0.476020] [978307223] ... generic registers: 2[ 0.481662] [978307223] ... value mask: 000000ffffffffff[ 0.488758] [978307223] ... max period: 000000007fffffff[ 0.495853] [978307223] ... fixed-purpose events: 3[ 0.501494] [978307223] ... event mask: 0000000700000003[ 0.509940] [978307223] NMI watchdog: enabled, takes one hw-pmucounter.[ 0.518498] [978307223] Booting Node 0, Processors #1[ 0.539267] [978307223] CMCI not supported[ 0.544203] [978307223] checking TSC synchronization [CPU#0 ->CPU#1]: passed.[ 0.552605] [978307223] NMI watchdog: enabled, takes one hw-pmucounter.[ 0.561103] [978307223] #2[ 0.579048] [978307223] CMCI not supported[ 0.583973] [978307223] checking TSC synchronization [CPU#0 ->CPU#2]: passed.[ 0.592347] [978307223] NMI watchdog: enabled, takes one hw-pmucounter.[ 0.600733] [978307223] #3 Ok.[ 0.619259] [978307223] CMCI not supported[ 0.623984] [978307223] checking TSC synchronization [CPU#0 ->CPU#3]: passed.

[ 0.632366] [978307223] NMI watchdog: enabled, takes one hw-pmucounter.[ 0.639986] [978307223] Brought up 4 CPUs[ 0.644470] [978307223] Total of 4 processors activated (19208.80BogoMIPS).[ 0.655414] [978307223] devtmpfs: initialized[ 0.665946] [978307223] Allocating netns hash table[ 0.671412] [978307223] Added namespace with id 0 to netns_htab[ 0.680557] [978307223] atomic64 test passed for x86-64 platformwith CX8 and with SSE



[ 0.690546] [978307223] NET: Registered protocol family 16[ 0.698932] [978307223] cpuidle: using governor menu[ 0.707667] [978307223] ACPI: bus type pci registered[ 0.714341] [978307223] PCI: MMCONFIG for domain 0000 [bus 00-ff] at[mem 0xe0000000-0xefffffff] (base 0xe0000000)[ 0.725908] [978307223] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff]reserved in E820[ 0.734658] [978307223] PCI: MMCONFIG for 0000 [bus00-3f] at [mem0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!)[ 0.758395] [978307223] PCI: Using configuration type 1 for baseaccess[ 0.801406] [978307223] bio: create slab <bio-0> at 0[ 0.807939] [978307223] ACPI: Added _OSI(Module Device)[ 0.813805] [978307223] ACPI: Added _OSI(Processor Device)[ 0.819958] [978307223] ACPI: Added _OSI(3.0 _SCP Extensions)[ 0.826400] [978307223] ACPI: Added _OSI(Processor AggregatorDevice)[ 0.836019] [978307223] ACPI: EC: Look up EC in DSDT[ 0.955447] [978307223] ACPI: SSDT 000000007f584918 0044E (v01PmRef Cpu0Ist 00003000 INTL 20061109)

[ 0.969226] [978307223] ACPI: Dynamic OEM Table Load:[ 0.974897] [978307223] ACPI: SSDT (null) 0044E (v01PmRef Cpu0Ist 00003000 INTL 20061109)[ 0.995229] [978307223] ACPI: SSDT 000000007f584d98 001FA (v01PmRef Cpu0Cst 00003001 INTL 20061109)[ 1.009840] [978307223] ACPI: Dynamic OEM Table Load:[ 1.015497] [978307223] ACPI: SSDT (null) 001FA (v01PmRef Cpu0Cst 00003001 INTL 20061109)[ 1.058066] [978307223] ACPI: SSDT 000000007f586a18 0047A (v01PmRef ApIst 00003000 INTL 20061109)[ 1.081790] [978307223] ACPI: Dynamic OEM Table Load:[ 1.087457] [978307223] ACPI: SSDT (null) 0047A (v01PmRef ApIst 00003000 INTL 20061109)[ 1.115697] [978307223] ACPI: SSDT 000000007f585d98 00119 (v01PmRef ApCst 00003000 INTL 20061109)[ 1.131427] [978307223] ACPI: Dynamic OEM Table Load:[ 1.137124] [978307223] ACPI: SSDT (null) 00119 (v01PmRef ApCst 00003000 INTL 20061109)[ 1.200881] [978307223] ACPI: Interpreter enabled[ 1.206139] [978307223] ACPI: (supports S0 S5)[ 1.211440] [978307223] ACPI: Using IOAPIC for interrupt routing[ 1.218879] [978307223] PCI: Using host bridge windows from ACPI; ifnecessary, use "pci=nocrs" and report a bug[ 1.477823] [978307224] acpi PNP0A08:00: Requesting ACPI _OSCcontrol (0x1d)[ 1.485705] [978307224] acpi PNP0A08:00: ACPI _OSC request failed(AE_NOT_EXIST), returned control mask: 0x1d

[ 1.496782] [978307224] ACPI: PCI Root Bridge [PCI0] (domain 0000[bus 00-ff])[ 1.504848] [978307224] acpi_pci_root_add: Skipping Lacrosse/DavosSerdes fixup[ 1.527079] [978307224] acpi PNP0A08:00: host bridge window [io0x0000-0x0cf7][ 1.535251] [978307224] acpi PNP0A08:00: host bridge window [io0x0d00-0xffff][ 1.543420] [978307224] acpi PNP0A08:00: host bridge window [mem0x000a0000-0x000bffff]



[ 1.552363] [978307224] acpi PNP0A08:00: host bridge window [mem0x80000000-0xdfffffff][ 1.561305] [978307224] acpi PNP0A08:00: host bridge window [mem0x280000000-0xfffffffff][ 1.571531] [978307224] PCI host bridge to bus 0000:00[ 1.577293] [978307224] pci_bus 0000:00: root bus resource [io0x0000-0x0cf7][ 1.585378] [978307224] pci_bus 0000:00: root bus resource [io0x0d00-0xffff][ 1.593465] [978307224] pci_bus 0000:00: root bus resource [mem0x000a0000-0x000bffff][ 1.602326] [978307224] pci_bus 0000:00: root bus resource [mem0x80000000-0xdfffffff][ 1.611187] [978307224] pci_bus 0000:00: root bus resource [mem0x280000000-0xfffffffff][ 1.620227] [978307224] pci_bus 0000:00: scanning bus[ 1.625920] [978307224] pci 0000:00:00.0: [8086:1f0b] type 00 class0x060000[ 1.633808] [978307224] pci 0000:00:00.0: callingquirk_mmio_always_on+0x0/0xa

[ 1.641970] [978307224] pci 0000:00:01.0: [8086:1f10] type 01 class0x060400[ 1.649870] [978307224] pci 0000:00:01.0: reg 10: [mem 0xd05e0000-0xd05fffff 64bit][ 1.658450] [978307224] pci 0000:00:01.0: callingpci_fixup_transparent_bridge+0x0/0x1d[ 1.667453] [978307224] pci 0000:00:01.0: PME# supported from D0D3hot D3cold[ 1.675430] [978307224] pci 0000:00:01.0: PME# disabled[ 1.681349] [978307224] pci 0000:00:02.0: [8086:1f11] type 01 class0x060400[ 1.689239] [978307224] pci 0000:00:02.0: reg 10: [mem 0xd05c0000-0xd05dffff 64bit][ 1.697819] [978307224] pci 0000:00:02.0: callingpci_fixup_transparent_bridge+0x0/0x1d[ 1.706822] [978307224] pci 0000:00:02.0: PME# supported from D0D3hot D3cold[ 1.714798] [978307224] pci 0000:00:02.0: PME# disabled[ 1.720690] [978307224] pci 0000:00:03.0: [8086:1f12] type 01 class0x060400[ 1.728588] [978307224] pci 0000:00:03.0: reg 10: [mem 0xd05a0000-0xd05bffff 64bit][ 1.737168] [978307224] pci 0000:00:03.0: callingpci_fixup_transparent_bridge+0x0/0x1d[ 1.746170] [978307224] pci 0000:00:03.0: PME# supported from D0D3hot D3cold[ 1.754146] [978307224] pci 0000:00:03.0: PME# disabled

[ 1.760047] [978307224] pci 0000:00:04.0: [8086:1f13] type 01 class0x060400[ 1.767945] [978307224] pci 0000:00:04.0: reg 10: [mem 0xd0580000-0xd059ffff 64bit][ 1.776524] [978307224] pci 0000:00:04.0: callingpci_fixup_transparent_bridge+0x0/0x1d[ 1.785527] [978307224] pci 0000:00:04.0: PME# supported from D0D3hot D3cold[ 1.793504] [978307224] pci 0000:00:04.0: PME# disabled[ 1.799411] [978307224] pci 0000:00:0b.0: [8086:1f18] type 00 class



0x0b4000[ 1.807323] [978307224] pci 0000:00:0b.0: reg 18: [mem 0xd0560000-0xd057ffff 64bit][ 1.815891] [978307224] pci 0000:00:0b.0: reg 20: [mem 0xd060c000-0xd060ffff 64bit][ 1.824583] [978307224] pci 0000:00:0e.0: [8086:1f14] type 00 class0x060000[ 1.832466] [978307224] pci 0000:00:0e.0: callingquirk_mmio_always_on+0x0/0xa[ 1.840652] [978307224] pci 0000:00:0f.0: [8086:1f16] type 00 class0x080600[ 1.848627] [978307224] pci 0000:00:0f.0: PME# supported from D0D3hot D3cold[ 1.856603] [978307224] pci 0000:00:0f.0: PME# 2016 Jun 16 17:28:03ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24 removed (Serialnumber SAL1941QTXW)disabled[ 1.862507] [978307224] pci 0000:00:13.0: [8086:1f15] type 00 class0x088000[ 1.870405] [978307224] pci 0000:00:13.0: reg 10: [mem 0xd0612000-

0xd06123ff 64bit][ 1.879160] [978307224] pci 0000:00:14.0: [8086:1f40] type 00 class0x020000[ 1.887058] [978307224] pci 0000:00:14.0: reg 10: [mem 0xd0540000-0xd055ffff 64bit][ 1.895622] [978307224] pci 0000:00:14.0: reg 18: [io 0xf060-0xf07f][ 1.902841] [978307224] pci 0000:00:14.0: reg 20: [mem 0xd0608000-0xd060bfff 64bit][ 1.911475] [978307224] pci 0000:00:14.0: PME# supported from D0D3hot D3cold[ 1.919452] [978307224] pci 0000:00:14.0: PME# disabled[ 1.925366] [978307224] pci 0000:00:14.1: [8086:1f40] type 00 class0x020000[ 1.933263] [978307224] pci 0000:00:14.1: reg 10: [mem 0xd0520000-0xd053ffff 64bit][ 1.941827] [978307224] pci 0000:00:14.1: reg 18: [io 0xf040-0xf05f][ 1.949045] [978307224] pci 0000:00:14.1: reg 20: [mem 0xd0604000-0xd0607fff 64bit][ 1.957679] [978307224] pci 0000:00:14.1: PME# supported from D0D3hot D3cold[ 1.965655] [978307224] pci 0000:00:14.1: PME# disabled[ 1.971567] [978307224] pci 0000:00:14.2: [8086:1f40] type 00 class0x020000[ 1.979464] [978307224] pci 0000:00:14.2: reg 10: [mem 0xd0500000-0xd051ffff 64bit]

[ 1.988028] [978307224] pci 0000:00:14.2: reg 18: [io 0xf020-0xf03f][ 1.995247] [978307224] pci 0000:00:14.2: reg 20: [mem 0xd0600000-0xd0603fff 64bit][ 2.003881] [978307224] pci 0000:00:14.2: PME# supported from D0D3hot D3cold[ 2.011858] [978307224] pci 0000:00:14.2: PME# disabled[ 2.017779] [978307224] pci 0000:00:16.0: [8086:1f2c] type 00 class0x0c0320[ 2.025687] [978307224] pci 0000:00:16.0: reg 10: [mem 0xd0611000-



0xd06113ff][ 2.033793] [978307224] pci 0000:00:16.0: PME# supported from D0D3hot D3cold[ 2.041769] [978307224] pci 0000:00:16.0: PME# disabled[ 2.047682] [978307224] pci 0000:00:1f.0: [8086:1f38] type 00 class0x060100[ 2.055705] [978307224] pci 0000:00:1f.3: [8086:1f3c] type 00 class0x0c0500[ 2.063601] [978307224] pci 0000:00:1f.3: reg 10: [mem 0xd0610000-0xd061001f][ 2.071602] [978307224] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f][ 2.078846] [978307224] pci_bus 0000:00: fixups for bus[ 2.084690] [978307224] pci 0000:00:01.0: scanning [bus 01-01]behind bridge, pass 0[ 2.093430] [978307224] pci_bus 0000:01: scanning bus[ 2.099147] [978307224] pci 0000:01:00.0: [1137:0101] type 00 class0x000000[ 2.107050] [978307224] pci 0000:01:00.0: reg 10: [mem 0x80000000-0x8fffffff]

[ 2.121296] [978307224] pci_bus 0000:01: fixups for bus[ 2.127139] [978307224] pci 0000:00:01.0: PCI bridge to [bus 01-01][ 2.134139] [978307224] pci 0000:00:01.0: bridge window [mem0x80000000-0x8fffffff][ 2.142891] [978307224] pci_bus 0000:01: bus scan returning withmax=01[ 2.150286] [978307224] pci 0000:00:02.0: scanning [bus 02-02]behind bridge, pass 0[ 2.159014] [978307224] pci_bus 0000:02: scanning bus[ 2.164748] [978307224] pci 0000:02:00.0: [1137:0103] type 00 class0x000000[ 2.172642] [978307224] pci 0000:02:00.0: reg 10: [mem 0xd0400000-0xd04fffff][ 2.184526] [978307224] pci_bus 0000:02: fixups for bus[ 2.190360] [978307224] pci 0000:00:02.0: PCI bridge to [bus 02-02][ 2.197358] [978307224] pci 0000:00:02.0: bridge window [mem0xd0400000-0xd04fffff][ 2.206110] [978307224] pci_bus 0000:02: bus scan returning withmax=02[ 2.213505] [978307224] pci 0000:00:03.0: scanning [bus 03-08]behind bridge, pass 0[ 2.222232] [978307224] pci_bus 0000:03: scanning bus[ 2.227938] [978307224] pci 0000:03:00.0: [10b5:8609] type 01 class0x060400[ 2.235832] [978307224] pci 0000:03:00.0: reg 10: [mem 0xd03c0000-0xd03dffff][ 2.243916] [978307224] pci 0000:03:00.0: PME# supported from D0

D3hot D3cold[ 2.251893] [978307224] pci 0000:03:00.0: PME# disabled[ 2.257823] [978307224] pci 0000:03:00.1: [10b5:8609] type 00 class0x088000[ 2.265717] [978307224] pci 0000:03:00.1: reg 10: [mem 0xd03e02016Jun 16 17:28:03 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detected thepresence of Module 24000-0xd03fffff][ 2.277707] [978307224] pci_bus 0000:03: fixups for bus[ 2.283550] [978307224] pci 0000:00:03.0: PCI bridge to [bus 03-08]



[ 2.290556] [978307224] pci 0000:00:03.0: bridge window [mem0x90000000-0xd03fffff][ 2.299311] [978307224] pci 0000:03:00.0: scanning [bus 04-08]behind bridge, pass 0[ 2.308060] [978307224] pci_bus 0000:04: scanning bus[ 2.313770] [978307224] pci 0000:04:01.0: [10b5:8609] type 01 class0x060400[ 2.321775] [978307224] pci 0000:04:01.0: PME# supported from D0D3hot D3cold[ 2.329752] [978307224] pci 0000:04:01.0: PME# disabled[ 2.335679] [978307224] pci 0000:04:05.0: [10b5:8609] type 01 class0x060400[ 2.343685] [978307224] pci 0000:04:05.0: PME# supported from D0D3hot D3cold[ 2.351663] [978307224] pci 0000:04:05.0: PME# disabled[ 2.357612] [978307224] pci 0000:04:07.0: [10b5:8609] type 01 class0x060400[ 2.365618] [978307224] pci 0000:04:07.0: PME# supported from D0D3hot D3cold[ 2.373595] [978307224] pci 0000:04:07.0: PME# disabled

[ 2.379524] [978307224] pci 0000:04:09.0: [10b5:8609] type 01 class0x060400[ 2.387537] [978307224] pci 0000:04:09.0: PME# supported from D0D3hot D3cold[ 2.395513] [978307224] pci 0000:04:09.0: PME# disabled[ 2.401410] [978307224] pci_bus 0000:04: fixups for bus[ 2.407250] [978307224] pci 0000:03:00.0: PCI bridge to [bus 04-08][ 2.414268] [978307224] pci 0000:04:01.0: scanning [bus 05-05]behind bridge, pass 0[ 2.423018] [978307224] pci_bus 0000:05: scanning bus[ 2.428667] [978307224] pci_bus 0000:05: fixups for bus[ 2.434507] [978307224] pci 0000:04:01.0: PCI bridge to [bus 05-05][ 2.441523] [978307224] pci_bus 0000:05: bus scan returning withmax=05[ 2.448918] [978307224] pci 0000:04:05.0: scanning [bus 06-06]behind bridge, pass 0[ 2.457667] [978307224] pci_bus 0000:06: scanning bus[ 2.463307] [978307224] pci_bus 0000:06: fixups for bus[ 2.469138] [978307224] pci 0000:04:05.0: PCI bridge to [bus 06-06][ 2.476153] [978307224] pci_bus 0000:06: bus scan returning withmax=06[ 2.483549] [978307224] pci 0000:04:07.0: scanning [bus 07-07]behind bridge, pass 0[ 2.492298] [978307224] pci_bus 0000:07: scanning bus[ 2.497947] [978307224] pci_bus 0000:07: fixups for bus[ 2.503786] [978307224] pci 0000:04:07.0: PCI bridge to [bus 07-07][ 2.510802] [978307224] pci_bus 0000:07: bus scan returning with

max=07[ 2.518197] [978307224] pci 0000:04:09.0: scanning [bus 08-08]behind bridge, pass 0[ 2.526946] [978307224] pci_bus 0000:08: scanning bus[ 2.532595] [978307224] pci_bus 0000:08: fixups for bus[ 2.538425] [978307224] pci 0000:04:09.0: PCI bridge to [bus 08-08][ 2.545441] [978307224] pci_bus 0000:08: bus scan returning withmax=08[ 2.552836] [978307224] pci 0000:04:01.0: scanning [bus 05-05]behind bridge, pass 1



[ 2.561493] [978307224] pci 0000:04:05.0: scanning [bus 06-06]behind bridge, pass 1[ 2.570151] [978307224] pci 0000:04:07.0: scanning [bus 07-07]behind bridge, pass 1[ 2.578808] [978307224] pci 0000:04:09.0: scanning [bus 08-08]behind bridge, pass 1[ 2.587463] [978307224] pci_bus 0000:04: bus scan returning withmax=08[ 2.594857] [978307224] pci 0000:03:00.0: scanning [bus 04-08]behind bridge, pass 1[ 2.603512] [978307224] pci_bus 0000:03: bus scan returning withmax=08[ 2.610906] [978307224] pci 0000:00:04.0: scanning [bus 09-09]behind bridge, pass 0[ 2.619656] [978307224] pci_bus 0000:09: scanning bus[ 2.625305] [978307224] pci_bus 0000:09: fixups for bus[ 2.631150] [978307224] pci 0000:00:04.0: PCI bridge to [bus 09-09][ 2.638161] [978307224] pci_bus 0000:09: bus scan returning withmax=09[ 2.645556] [978307224] pci 0000:00:01.0: scanning [bus 01-01]

behind bridge, pass 1[ 2.654214] [978307224] pci 0000:00:02.0: scanning [bus 02-02]behind bridge, pass 1[ 2.662871] [978307224] pci 0000:00:03.0: scanning [bus 03-08]behind bridge, pass 1[ 2.671528] [978307224] pci 0000:00:04.0: scanning [bus 09-09]behind bridge, pass 1[ 2.680183] [978307224] pci_bus 0000:00: bus scan returning withmax=09[ 2.687574] [978307224] pci_bus 0000:00: on NUMA node 0[ 2.693462] [978307224] ACPI: PCI Interrupt Routing Table[\_SB_.PCI0._PRT][ 2.710414] [978307224] ACPI _OSC control for PCIe not granted,disabling ASPM[ 2.753883] [978307224] ACPI: PCI Interrupt Routing Table[\_SB_.PCI0.PEX1._PRT][ 2.784094] [978307224] ACPI: PCI Interrupt Routing Table[\_SB_.PCI0.PEX2._PRT][ 2.814135] [978307224] ACPI: PCI Interrupt Routing Table[\_SB_.PCI0.PEX3._PRT][ 2.844073] [978307224] ACPI: PCI Interrupt Routing Table[\_SB_.PCI0.PEX4._PRT][ 3.050012] [978307225] ACPI: PCI Interrupt Link [LNKA] (IRQs 6 7 10*11 12)[ 3.062794] [978307225] ACPI: PCI Interrupt Link [LNKB] (IRQs 6 7*10 11 12)[ 3.075575] [978307225] ACPI: PCI Interrupt Link [LNKC] (IRQs 6 7 10

*11 12)[ 3.088335] [978307225] ACPI: PCI Interrupt Link [LNKD] (IRQs 6 7 1011 12) *0, disabled.[ 3.102405] [978307225] ACPI: PCI Interrupt Link [LNKE] (IRQs 6 *710 11 12)[ 3.115194] [978307225] ACPI: PCI Interrupt Link [LNKF] (IRQs 6 *710 11 12)[ 3.127983] [978307225] ACPI: PCI Interrupt Link [LNKG] (IRQs 6 7 10*11 12)[ 3.140784] [978307225] ACPI: PCI Interrupt Link [LNKH] (IRQs 6 7



*10 11 12)[ 3.157298] [978307225] vgaarb: loaded[ 3.164428] [978307225] SCSI subsystem initialized[ 3.169798] [978307225] ACPI: bus type scsi registered[ 3.176062] [978307225] libata version 3.00 loaded.[ 3.182668] [978307225] usbcore: registered new interface driverusbfs[ 3.190382] [978307225] usbcore: registered new interface driver hub[ 3.197749] [978307225] usbcore: registered new device driver usb[ 3.205174] [978307225] PCI: Using ACPI for IRQ routing[ 3.212310] [978307225] PCI: pci_cache_line_size set to 64 bytes[ 3.219082] [978307225] pci 0000:00:01.0: BAR 0: reserving [mem0xd05e0000-0xd05fffff flags 0x140204] (d=0, p=0)[ 3.230481] [978307225] pci 0000:00:02.0: BAR 0: reserving [mem0xd05c0000-0xd05dffff flags 0x140204] (d=0, p=0)[ 3.241877] [978307225] pci 0000:00:03.0: BAR 0: reserving [mem0xd05a0000-0xd05bffff flags 0x140204] (d=0, p=0)[ 3.253275] [978307225] pci 0000:00:04.0: BAR 0: reserving [mem0xd0580000-0xd059ffff flags 0x140204] (d=0, p=0)[ 3.264673] [978307225] pci 0000:00:0b.0: BAR 2: reserving [mem

0xd0560000-0xd057ffff flags 0x140204] (d=0, p=0)[ 3.276045] [978307225] pci 0000:00:0b.0: BAR 4: reserving [mem0xd060c000-0xd060ffff flags 0x140204] (d=0, p=0)[ 3.287483] [978307225] pci 0000:00:13.0: BAR 0: reserving [mem0xd0612000-0xd06123ff flags 0x140204] (d=0, p=0)[ 3.298880] [978307225] pci 0000:00:14.0: BAR 0: reserving [mem0xd0540000-0xd055ffff flags 0x140204] (d=0, p=0)[ 3.310250] [978307225] pci 0000:00:14.0: BAR 2: reserving [io0xf060-0xf07f flags 0x40101] (d=0, p=0)[ 3.320747] [978307225] pci 0000:00:14.0: BAR 4: reserving [mem0xd0608000-0xd060bfff flags 0x140204] (d=0, p=0)[ 3.332149] [978307225] pci 0000:00:14.1: BAR 0: reserving [mem0xd0520000-0xd053ffff flags 0x140204] (d=0, p=0)[ 3.343521] [978307225] pci 0000:00:14.1: BAR 2: reserving [io0xf040-0xf05f flags 0x40101] (d=0, p=0)[ 3.354017] [978307225] pci 0000:00:14.1: BAR 4: reserving [mem0xd0604000-0xd0607fff flags 0x140204] (d=0, p=0)[ 3.365412] [978307225] pci 0000:00:14.2: BAR 0: reserving [mem0xd0500000-0xd051ffff flags 0x140204] (d=0, p=0)[ 3.376783] [978307225] pci 0000:00:14.2: BAR 2: reserving [io0xf020-0xf03f flags 0x40101] (d=0, p=0)[ 3.387279] [978307225] pci 0000:00:14.2: BAR 4: reserving [mem0xd0600000-0xd0603fff flags 0x140204] (d=0, p=0)[ 3.398674] [978307225] pci 0000:00:16.0: BAR 0: reserving [mem0xd0611000-0xd06113ff flags 0x40200] (d=0, p=0)[ 3.409996] [978307225] pci 0000:00:1f.3: BAR 0: reserving [mem0xd0610000-0xd061001f flags 0x40200] (d=0, p=0)

[ 3.421271] [978307225] pci 0000:00:1f.3: BAR 4: reserving [io0xf000-0xf01f flags 0x40101] (d=0, p=0)[ 3.2016 Jun 16 17:28:14 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE:Module 24 removed (Serial number SAL1941QTXW)431795] [978307225] pci 0000:01:00.0: BAR 0: reserving [mem 0x80000000-0x8fffffff flags 0x40200] (d=0, p=0)[ 3.443095] [978307225] pci 0000:02:00.0: BAR 0: reserving [mem0xd0400000-0xd04fffff flags 0x40200] (d=0, p=0)[ 3.454395] [978307225] pci 0000:03:00.0: BAR 0: reserving [mem0xd03c0000-0xd03dffff flags 0x40200] (d=0, p=0)



[ 3.465694] [978307225] pci 0000:03:00.1: BAR 0: reserving [mem0xd03e0000-0xd03fffff flags 0x40200] (d=0, p=0)[ 3.477586] [978307225] e820: reserve RAM buffer [mem 0x7d470000-0x7fffffff][ 3.485475] [978307225] e820: reserve RAM buffer [mem 0x7f560000-0x7fffffff][ 3.493372] [978307225] e820: reserve RAM buffer [mem 0x7f5d6000-0x7fffffff][ 3.501269] [978307225] e820: reserve RAM buffer [mem 0x7f800000-0x7fffffff][ 3.511308] [978307225] NetLabel: Initializing[ 3.516277] [978307225] NetLabel: domain hash size = 128[ 3.522307] [978307225] NetLabel: protocols = UNLABELED CIPSOv4[ 3.529296] [978307225] NetLabel: unlabeled traffic allowed bydefault[ 3.536969] [978307225] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0[ 3.543612] [978307225] hpet0: 3 comparators, 64-bit 14.318180 MHzcounter[ 3.553756] [978307225] Switching to clocksource hpet[ 3.816319] [978307225] pnp: PnP ACPI init

[ 3.821116] [978307225] ACPI: bus type pnp registered[ 3.833934] [978307225] pnp 00:00: Plug and Play ACPI device, IDsPNP0a08 PNP0a03 (active)[ 3.844025] [978307225] pnp 00:01: Plug and Play ACPI device, IDsPNP0003 (active)[ 3.864575] [978307225] system 00:02: [mem 0xe0000000-0xefffffff]could not be reserved[ 3.873591] [978307225] system 00:02: [mem 0x7f800000-0x7fffffff]could not be reserved[ 3.882546] [978307225] system 00:02: Plug and Play ACPI device, IDsPNP0c01 (active)[ 3.893181] [978307225] system 00:03: [io 0x0680-0x069f] has beenreserved[ 3.901007] [978307225] system 00:03: [io 0x0400-0x047f] has beenreserved[ 3.908829] [978307225] system 00:03: [io 0x0500-0x05fe] has beenreserved[ 3.916685] [978307225] system 00:03: [mem 0xfed00000-0xfedfffff]could not be reserved[ 3.925683] [978307225] system 00:03: [mem 0x000c0000-0x000dffff]has been reserved[ 3.934314] [978307225] system 00:03: [mem 0x000e0000-0x000fffff]could not be reserved[ 3.943300] [978307225] system 00:03: [mem 0xffa00000-0xffffffff]has been reserved[ 3.951898] [978307225] system 00:03: [mem 0xfee00000-0xfeefffff]has been reserved

[ 3.960462] [978307225] system 00:03: Plug and Play ACPI device, IDsPNP0c02 (active)[ 3.970076] [978307225] pnp 00:04: Plug and Play ACPI device, IDsPNP0b00 (active)[ 3.980569] [978307225] pnp 00:05: Plug and Play ACPI device, IDsPNP0501 (active)[ 3.990982] [978307225] pnp 00:06: Plug and Play ACPI device, IDsPNP0501 (active)[ 4.002805] [978307225] pnp: PnP ACPI: found 7 devices[ 4.008552] [978307225] ACPI: ACPI bus type pnp unregistered



[ 4.065621] [978307225] pci 0000:00:01.0: PCI bridge to [bus 01-01][ 4.072642] [978307225] pci 0000:00:01.0: bridge window [mem0x80000000-0x8fffffff][ 4.081409] [978307225] pci 0000:00:02.0: PCI bridge to [bus 02-02][ 4.088423] [978307225] pci 0000:00:02.0: bridge window [mem0xd0400000-0xd04fffff][ 4.097190] [978307225] pci 0000:04:01.0: PCI bridge to [bus 05-05][ 4.104213] [978307225] pci 0000:04:05.0: PCI bridge to [bus 06-06][ 4.111226] [978307225] pci 0000:04:07.0: PCI bridge to [bus 07-07][ 4.118248] [978307225] pci 0000:04:09.0: PCI bridge to [bus 08-08][ 4.125269] [978307225] pci 0000:03:00.0: PCI bridge to [bus 04-08][ 4.132290] [978307225] pci 0000:00:03.0: PCI bridge to [bus 03-08][ 4.139306] [978307225] pci 0000:00:03.0: bridge window [mem0x90000000-0xd03fffff][ 4.148071] [978307225] pci 0000:00:04.0: PCI bridge to [bus 09-09][ 4.155460] [978307225] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7][ 4.162861] [978307225] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff][ 4.170261] [978307225] pci_bus 0000:00: resource 6 [m2016 Jun 16

17:28:14 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detected thepresence of Module 24[ 14.210705] [978307235] ------------[ cut here ]------------[ 14.217057] [978307235] WARNING: at /auto/Insieme-EOR9/syncs/d_plus/collapse_from_dplus_pmn_29/MERGE-00000013839/third-party/src/A.buildme/linux/final.x86e-3.4.91/kernel-src/wrl5-in/linux-3.4.91_wrl5-in/arch/x86/mm/init.c:348 free_init_pages+0x6e/0x210()[ 14.242206] [978307235] Hardware name: To be filled by O.E.M.[ 14.248637] [978307235] Modules linked in:[ 14.253233] [978307235] Pid: 1, comm: swapper/0 Not tainted 3.4.91-WR5.0.1.13_standard+ #1[ 14.262470] [978307235] Call Trace:[ 14.266382] [978307235] [<ffffffff8104a144>]warn_slowpath_common+0x94/0xc0[ 14.274270] [978307236] [<ffffffff8104a18a>]warn_slowpath_null+0x1a/0x20[ 14.281965] [978307236] [<ffffffff8103352e>]free_init_pages+0x6e/0x210[ 14.289464] [978307236] [<ffffffff81cfdda6>] ?free_initrd+0x9e/0x9e[ 14.296663] [978307236] [<ffffffff81033726>]free_initrd_mem+0x26/0x30[ 14.304055] [978307236] [<ffffffff81cfdd8c>] free_initrd+0x84/0x9e[ 14.311074] [978307236] [<ffffffff81cfde70>]populate_rootfs+0xca/0xd1[ 14.318477] [978307236] [<ffffffff81000222>]do_one_initcall+0x92/0x160

[ 14.325976] [978307236] [<ffffffff81cfbd86>]kernel_init+0x13b/0x1fc[ 14.333181] [978307236] [<ffffffff81cfb4f5>] ? loglevel+0x31/0x31[ 14.340100] [978307236] [<ffffffff8100163c>] ?__switch_to+0x1cc/0x3f0[ 14.347502] [978307236] [<ffffffff816fcb64>]kernel_thread_helper+0x4/0x10[ 14.355282] [978307236] [<ffffffff81cfbc4b>] ?start_kernel+0x473/0x473[ 14.362779] [978307236] [<ffffffff816fcb60>] ? gs_change+0x13/0x13



[ 14.369804] [978307236] ---[ end trace df73ee5dc63fda54 ]---[ 14.379085] [978307236] Freeing initrd memory: 160528k freed[ 14.454559] [978307236] PCI-DMA: Using software bounce buffering forIO (SWIOTLB)[ 14.462945] [978307236] Placing 64MB software IO TLB betweenffff880079470000 - ffff88007d470000[ 14.472768] [978307236] software IO TLB at phys 0x79470000 -0x7d470000[ 14.487073] [978307236] Machine check injector initialized[ 14.493504] [978307236] Couldn't find supported PCI device![ 14.506274] [978307236] microcode: CPU0 sig=0x406d8, pf=0x1,revision=0x125[ 14.514119] [978307236] microcode: CPU1 sig=0x406d8, pf=0x1,revision=0x125[ 14.521959] [978307236] microcode: CPU2 sig=0x406d8, pf=0x1,revision=0x125[ 14.529835] [978307236] microcode: CPU3 sig=0x406d8, pf=0x1,revision=0x125[ 14.538162] [978307236] microcode: Microcode Update Driver: v2.00<[email protected]>, Peter Oruba

[ 14.553282] [978307236] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)[ 14.564242] [978307236] audit: initializing netlink socket(disabled)[ 14.571570] [978307236] type=2000 audit(978307236.303:1):initialized[ 14.686927] [978307236] squashfs: version 4.0 (2009/01/31) PhillipLougher[ 14.696237] [978307236] Registering unionfs 2.5.11 (for 3.3.0-rc3)[ 14.708693] [978307236] Installing knfsd (copyright (C) [email protected]).[ 14.726501] [978307236] jffs2: version 2.2. © 2001-2006 Red Hat,Inc.[ 14.739262] [978307236] msgmni has been set to 15914[ 14.745817] [978307236] Smack: Registering netfilter hooks[ 14.758552] [978307236] alg: No test for stdrng (krng)[ 14.779621] [978307236] Block layer SCSI generic (bsg) driverversion 0.4 loaded (major 253)[ 14.789058] [978307236] io scheduler noop registered[ 14.794609] [978307236] io scheduler deadline registered[ 14.801610] [978307236] io scheduler cfq registered (default)[ 14.810177] [978307236] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X[ 14.818360] [978307236] pcieport 0000:00:02.0: irq 41 for MSI/MSI-X[ 14.826522] [978307236] pcieport 0000:00:03.0: irq 42 for MSI/MSI-X[ 14.834694] [978307236] pcieport 0000:00:04.0: irq 43 for MSI/MSI-X[ 14.842932] [978307236] pcieport 0000:03:00.0: irq 44 for MSI/MSI-X[ 14.851121] [978307236] pcieport 0000:04:01.0: irq 45 for MSI/MSI-X

[ 14.859351] [978307236] pcieport 0000:04:05.0: irq 46 for MSI/MSI-X2016 Jun 16 17:28:17 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_DETECT: Module 22detected (Serial number SAL1941QTXL) Module-Type 4-slot Fabric ModuleModel N9K-C9504-FM-E[ 14.867539] [978307236] pcieport 0000:04:07.0: irq 47 for MSI/MSI-X[ 14.875763] [978307236] pcieport 0000:04:09.0: irq 48 for MSI/MSI-X[ 14.884474] [978307236] pcieport 0000:00:01.0: Enabling pcie AER fordevice[ 14.892358] [978307236] aer 0000:00:01.0:pcie02: service driver aerloaded



[ 14.900542] [978307236] pcieport 0000:00:02.0: Enabling pcie AER fordevice[ 14.908425] [978307236] aer 0000:00:02.0:pcie02: service driver aerloaded[ 14.916603] [978307236] pcieport 0000:00:03.0: Enabling pcie AER fordevice[ 14.924491] [978307236] pcieport 0000:03:00.0: Enabling pcie AER fordevice[ 14.932384] [978307236] pcieport 0000:04:01.0: Enabling pcie AER fordevice[ 14.940278] [978307236] pcieport 0000:04:05.0: Enabling pcie AER fordevice[ 14.948170] [978307236] pcieport 0000:04:07.0: Enabling pcie AER fordevice[ 14.956062] [978307236] pcieport 0000:04:09.0: Enabling pcie AER fordevice[ 14.963940] [978307236] aer 0000:00:03.0:pcie02: service driver aerloaded[ 14.972128] [978307236] pcieport 0000:00:04.0: Enabling pcie AER fordevice

[ 14.980010] [978307236] aer 0000:00:04.0:pcie02: service driver aerloaded[ 14.988557] [978307236] pcieport 0000:00:01.0: Signaling PME throughPCIe PME interrupt[ 14.997529] [978307236] pci 0000:01:00.0: Signaling PME through PCIePME interrupt[ 15.005998] [978307236] pcie_pme 0000:00:01.0:pcie01: service driverpcie_pme loaded[ 15.014798] [978307236] pcieport 0000:00:02.0: Signaling PME throughPCIe PME interrupt[ 15.023746] [978307236] pci 0000:02:00.0: Signaling PME through PCIePME interrupt[ 15.032209] [978307236] pcie_pme 0000:00:02.0:pcie01: service driverpcie_pme loaded[ 15.041005] [978307236] pcieport 0000:00:03.0: Signaling PME throughPCIe PME interrupt[ 15.049952] [978307236] pcieport 0000:03:00.0: Signaling PME throughPCIe PME interrupt[ 15.058897] [978307236] pcieport 0000:04:01.0: Signaling PME throughPCIe PME interrupt[ 15.067832] [978307236] pcieport 0000:04:05.0: Signaling PME throughPCIe PME interrupt[ 15.076776] [978307236] pcieport 0000:04:07.0: Signaling PME throughPCIe PME interrupt[ 15.085720] [978307236] pcieport 0000:04:09.0: Signaling PME throughPCIe PME interrupt[ 15.094664] [978307236] pci 0000:03:00.1: Signaling PME through PCIe

PME interrupt[ 15.103126] [978307236] pcie_pme 0000:00:03.0:pcie01: service driverpcie_pme loaded[ 15.111941] [978307236] pcieport 0000:00:04.0: Signaling PME throughPCIe PME interrupt[ 15.120891] [978307236] pcie_pme 0000:00:04.0:pcie01: service driverpcie_pme loaded[ 15.129643] [978307236] intel_idle: does not run on family 6 model77[ 15.145829] [978307236] ACPI: Requesting acpi_cpufreq



[ 15.152101] [978307236] ACPI: processor limited to max C-state 0[ 15.167573] [978307236] Monitor-Mwait will be used to enter C-1state[ 15.174811] [978307236] Monitor-Mwait will be used to enter C-2state[ 15.259395] [978307236] GHES: HEST is not enabled![ 15.266223] [978307236] Serial: 8250/16550 driver, 4 ports, IRQsharing enabled[ 15.294995] [978307237] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a16550A[ 15.323620] [978307237] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a16550A[ 15.334331] [978307237] kgdb: Registered I/O driver kgdboc.[ 15.371773] [978307237] brd: module loaded[ 15.392378] [978307237] loop: module loaded[ 15.397420] [978307237] Uniform Multi-Platform E-IDE driver[ 15.404710] [978307237] ide-gd driver 1.18[ 15.409433] [978307237] ide-cd driver 5.00[ 15.415242] [978307237] mpt2sas version 12.100.00.00 loaded[ 15.423679] [978307237] VMware PVSCSI driver - version 1.0.2.0-k

[ 15.435527] [978307237] physmap platform flash device: 04000000 at8c000000[ 15.458261] [978307237] physmap-flash.0: Found 1 x16 devices at 0x0in 16-bit bank. Manufacturer ID 0x000089 Chip ID 0x00227e[ 15.470979] [978307237] Amd/Fujitsu Extended Query Table at 0x0040[ 15.477948] [978307237] Amd/Fujitsu Extended Query version 1.3.[ 15.484771] [97832016 Jun 16 17:28:17 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PWRUP: Module 22 powered up (Serial number SAL1941QTXL)07237] number of CFI chips: 1[ 15.489811] [978307237] 6 cmdlinepart partitions found on MTD devicephysmap-flash.0[ 15.498476] [978307237] Creating 6 MTD partitions on "physmap-flash.0":[ 15.505907] [978307237] 0x000000000000-0x000000040000 : "SM_LOG"[ 15.513045] [978307237] Refined TSC clocksource calibration:2399.999 MHz.[ 15.514403] [978307237] Notif for mtd device SM_LOG[ 15.514442] [978307237] 0x000000040000-0x000000080000 : "RR_LOG"[ 15.515933] [978307237] Notif for mtd device RR_LOG[ 15.515971] [978307237] 0x000000080000-0x0000000c0000 : "KLOG"[ 15.517421] [978307237] Notif for mtd device KLOG[ 15.517460] [978307237] 0x0000000c0000-0x0000001c0000 : "mtdoops"[ 15.519006] [978307237] Notif for mtd device mtdoops[ 15.519423] [978307237] mtdoops: ready 11, 12 (no erase)[ 15.519429] [978307237] mtdoops: Attached to MTD device 3[ 15.519465] [978307237] 0x0000001c0000-0x0000011c0000 : "KTRACES"[ 15.520960] [978307237] Notif for mtd device KTRACES

[ 15.520997] [978307237] 0x0000011c0000-0x0000023c0000 : "PLOG"[ 15.522464] [978307237] Notif for mtd device PLOG[ 15.524196] [978307237] tun: Universal TUN/TAP device driver, 1.6[ 15.524202] [978307237] tun: (C) 1999-2004 Max Krasnyansky<[email protected]>[ 15.525583] [978307237] cnic: Broadcom NetXtreme II CNIC Driver cnicv2.5.10 (March 21, 2012)[ 15.525839] [978307237] bnx2x: Broadcom NetXtreme II 5771x/578xx10/20-Gigabit Ethernet Driver bnx2x 1.72.10-0 (2012/02/20)[ 15.526658] [978307237] e1000: Intel(R) PRO/1000 Network Driver -



version 7.3.21-k8-NAPI[ 15.526664] [978307237] e1000: Copyright (c) 1999-2006 IntelCorporation.[ 15.526967] [978307237] VMware vmxnet3 virtual NIC driver - version1.1.29.0-k-NAPI[ 15.527446] [978307237] usbcore: registered new interface driverkaweth[ 15.527794] [978307237] usbcore: registered new interface driverasix[ 15.527969] [978307237] usbcore: registered new interface drivercdc_ether[ 15.528143] [978307237] usbcore: registered new interface drivernet1080[ 15.528330] [978307237] usbcore: registered new interface drivercdc_subset[ 15.528506] [978307237] usbcore: registered new interface driverzaurus[ 15.528690] [978307237] usbcore: registered new interface drivercdc_ncm[ 15.528897] [978307237] ehci_hcd: USB 2.0 'Enhanced' Host Controller

(EHCI) Driver[ 15.529152] [978307237] ehci_hcd 0000:00:16.0: enabling busmastering[ 15.529165] [978307237] ehci_hcd 0000:00:16.0: setting latency timerto 64[ 15.529173] [978307237] ehci_hcd 0000:00:16.0: EHCI Host Controller[ 15.529608] [978307237] ehci_hcd 0000:00:16.0: new USB busregistered, assigned bus number 1[ 15.529812] [978307237] ehci_hcd 0000:00:16.0: debug port 2[ 15.533702] [978307237] ehci_hcd 0000:00:16.0: cache line size of 64is not supported[ 15.534126] [978307237] ehci_hcd 0000:00:16.0: irq 23, io mem0xd0611000[ 15.775254] [978307237] Switching to clocksource tsc[ 15.777158] [978307237] ehci_hcd 0000:00:16.0: USB 2.0 started, EHCI1.00[ 15.777963] [978307237] usb usb1: New USB device found,idVendor=1d6b, idProduct=0002[ 15.777971] [978307237] usb usb1: New USB device strings: Mfr=3,Product=2, SerialNumber=1[ 15.777977] [978307237] usb usb1: Product: EHCI Host Controller[ 15.777983] [978307237] usb usb1: Manufacturer: Linux 3.4.91-WR5.0.1.13_standard+ ehci_hcd[ 15.777989] [978307237] usb usb1: SerialNumber: 0000:00:16.0[ 15.780341] [978307237] hub 1-0:1.0: USB hub found[ 15.780549] [978307237] hub 1-0:1.0: 8 ports detected[ 15.783634] [978307237] ohci_hcd: USB 1.1 'Open' Host Controller

(OHCI) Driver[ 15.783832] [978307237] uhci_hcd: USB Universal Host ControllerInterface driver[ 15.785216] [978307237] usbcore: registered new interface drivercdc_acm[ 15.785223] [978307237] cdc_acm: USB Abstract Control Model driverfor USB modems and ISDN adapters[ 15.785422] [978307237] usbcore: registered new interface drivercdc_wdm[ 15.785428] [978307237] Initializing U2016 Jun 16 17:28:25 ch27 %$



VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24 removed (Serial numberSAL1941QTXW)[ 21.695807] [978307245] Intel(R) Gigabit Ethernet Network Driver -version 4.0.17[ 21.704183] [978307245] Copyright (c) 2007-2012 Intel Corporation.[ 21.711340] [978307245] igb 0000:00:14.0: Enabling pcie AER fordevice[ 21.719242] [978307245] igb 0000:00:14.0: irq 49 for MSI/MSI-X[ 21.725823] [978307245] igb 0000:00:14.0: irq 50 for MSI/MSI-X[ 21.732604] [978307245] NAPI add for Queue 0 with weight 64[ 21.791058] [978307245] igb: 0000:00:14.0: igb_probe:card_index=9000[ 21.804058] [978307245] Smack: Registered new blacklist net device'eth0', add ifindex '7'[ 21.813944] [978307245] igb 0000:00:14.0: Intel(R) Gigabit EthernetNetwork Connection[ 21.822798] [978307245] igb 0000:00:14.0: eth0: MAC:00:a0:c9:00:00:00[ 21.830204] [978307245] igb 0000:00:14.0: eth0: PBA No: 001900-000[ 21.837264] [978307245] igb 0000:00:14.0: LRO is disabled

[ 21.843399] [978307245] igb 0000:00:14.0: Using MSI-X interrupts. 1rx queue(s), 1 tx queue(s)[ 21.853115] [978307245] igb 0000:00:14.1: can't derive routing forPCI INT B[ 21.860995] [978307245] igb 0000:00:14.1: PCI INT B: no GSI[ 21.867285] [978307245] igb 0000:00:14.1: Enabling pcie AER fordevice[ 21.875161] [978307245] igb 0000:00:14.1: irq 51 for MSI/MSI-X[ 21.881734] [978307245] igb 0000:00:14.1: irq 52 for MSI/MSI-X[ 21.888512] [978307245] NAPI add for Queue 0 with weight 64[ 21.947481] [978307245] igb: 0000:00:14.1: igb_probe:card_index=9000[ 21.961415] [978307245] igb 0000:00:14.1: Intel(R) Gigabit EthernetNetwork Connection[ 21.970269] [978307245] igb 0000:00:14.1: eth1: MAC:00:a0:c9:00:00:01[ 21.977683] [978307245] igb 0000:00:14.1: eth1: PBA No: 001900-000[ 21.984764] [978307245] igb 0000:00:14.1: LRO is disabled[ 21.990902] [978307245] igb 0000:00:14.1: Using MSI-X interrupts. 1rx queue(s), 1 tx queue(s)[ 22.000617] [978307245] igb 0000:00:14.2: can't derive routing forPCI INT C[ 22.008497] [978307245] igb 0000:00:14.2: PCI INT C: no GSI[ 22.014788] [978307245] igb 0000:00:14.2: Enabling pcie AER fordevice[ 22.022652] [978307245] igb 0000:00:14.2: irq 53 for MSI/MSI-X[ 22.029226] [978307245] igb 0000:00:14.2: irq 54 for MSI/MSI-X

[ 22.036025] [978307245] NAPI add for Queue 0 with weight 64[ 22.093913] [978307245] igb: 0000:00:14.2: igb_probe:card_index=9000[ 22.107185] [978307245] igb 0000:00:14.2: Intel(R) Gigabit EthernetNetwork Connection[ 22.116040] [978307245] igb 0000:00:14.2: eth2: MAC:00:a0:c9:00:00:02[ 22.123447] [978307245] igb 0000:00:14.2: eth2: PBA No: 001900-000[ 22.130534] [978307245] igb 0000:00:14.2: LRO is disabled[ 22.136671] [978307245] igb 0000:00:14.2: Using MSI-X interrupts. 1



rx queue(s), 1 tx queue(s)[ 23.905198] [978307247] Smack: Renamed existing blacklist net device'eth0' to 'eobc', remove ifindex '7'[ 24.445766] [978307247] tmpfs: Bad mount option errors[ 25.882682] [978307249] klm_procfs_init: module license'unspecified' taints kernel.[ 25.891397] [978307249] Disabling lock debugging due to kernel taint[ 25.983077] [978307249] kgpl_init(33): calledFramebuffer /dev/fb0 not detectedBoot splashscreen disabledmount: proc already mounted/usr.img not foundStarting udevSourcing /etc/rc.d/include/rcS.includeExecuting /etc/rcS.d/S04eobc-igb ...20.36: Installing klm_ins_igb ...Installing klm_ins_igb..Sourcing /etc/rc.d/include/rcS.includeExecuting /etc/rcS.d/S04make-devices ...Sourcing /etc/rc.d/include/rcS.include

Executing /etc/rcS.d/S04mount_isan ...21.71: Mounting isan ...21.74: images do not existSourcing /etc/rc.d/include/rcS.includeExecuting /etc/rcS.d/S05mount_debugfs ...Sourcing /etc/rc.d/include/rcS.includeExecuting /etc/rcS.d/S05rename-netif ...Rename eth0 to eobcStarting Bootlog daemon: bootlogd: cannot allocate pseudo tty: No suchfile or directorybootlogd.Sourcing /etc/rc.d/include/rcS.includeExecuting /etc/rcS.d/S08fix-perms ...Executing /etc/rcS.d/S08fix-perms [S08fix-perms]mount: you must specify the files2016 Jun 16 17:28:25 ch27 %$ VDC-1 %$%PLATFORM-2-MOD_PRESENT: Detected the presence of Module 24[?lm?flash ...Sending one-wire error code using TACOMA LC IOFPGA offsetold data: e5 new data: 800000e725.57: Unprotecting flashes ..25.64: LC2 wp 225.69: Unprotecting flash value 0x0old data: 0 new data: 025.80: Checking plog ...25.89: LC2 2old data: ff new data: ffUBI device number 5, total 144 LEBs (18855936 bytes, 18.0 MiB),

available 0 LEBs (0 bytes), LEB size 130944 bytes (127.9 KiB)26.29: LC2 2old data: ff new data: fe26.39: LC2 2old data: fe new data: ff^R^E[ 32.300362] [978307255] UBIFS: recovery completed[ 36.882597] [978307260] UBIFS: mounted UBI device 5, volume 0, name"plog"[ 36.890293] [978307260] UBIFS: file system size: 17022720 bytes(16623 KiB, 16 MiB, 130 LEBs)



[ 36.900026] [978307260] UBIFS: journal size: 1047553 bytes(1023 KiB, 0 MiB, 7 LEBs)[ 36.909266] [978307260] UBIFS: media format: w4/r0 (latest isw4/r0)[ 36.916956] [978307260] UBIFS: default compressor: lzo[ 36.922713] [978307260] UBIFS: reserved for root: 804025 bytes (785KiB)[ 36.930307] [978307260] UBIFS DBG (pid 1488): mount_ubifs: compiledon: May 30 2016 at 21:03:41[ 36.940811] [978307260] UBIFS DBG (pid 1488): mount_ubifs: min. I/Ounit size: 8 bytes[ 36.949760] [978307260] UBIFS DBG (pid 1488): mount_ubifs: max.write size: 1024 bytes[ 36.959000] [978307260] UBIFS DBG (pid 1488): mount_ubifs: LEB size:130944 bytes (127 KiB)[ 36.969405] [978307260] UBIFS DBG (pid 1488): mount_ubifs: datajournal heads: 1[ 36.977773] [978307260] UBIFS DBG (pid 1488): mount_ubifs: UUID:1E51E4C4-0A5D-4455-8B96-664F603DF799[ 36.989535] [978307260] UBIFS DBG (pid 1488): mount_ubifs: big_lpt

0[ 36.997902] [978307260] UBIFS DBG (pid 1488): mount_ubifs: log LEBs:3 (3 - 5)[ 37.007047] [978307260] UBIFS DBG (pid 1488): mount_ubifs: LPT areaLEBs: 2 (6 - 7)[ 37.016193] [978307260] UBIFS DBG (pid 1488): mount_ubifs: orphanarea LEBs: 2 (8 - 9)[ 37.025337] [978307260] UBIFS DBG (pid 1488): mount_ubifs: main areaLEBs: 130 (10 - 139)[ 37.034967] [978307260] UBIFS DBG (pid 1488): mount_ubifs: indexLEBs: 19[ 37.043433] [978307260] UBIFS DBG (pid 1488): mount_ubifs: totalindex bytes: 16128 (15 KiB, 0 MiB)[ 37.053741] [978307260] UBIFS DBG (pid 1488): mount_ubifs: key hashtype: 0[ 37.062109] [978307260] UBIFS DBG (pid 1488): mount_ubifs: treefanout: 8[ 37.070478] [978307260] UBIFS DBG (pid 1488): mount_ubifs: reservedGC LEB: 104[ 37.079040] [978307260] UBIFS DBG (pid 1488): mount_ubifs: firstmain LEB: 10[ 37.087506] [978307260] UBIFS DBG (pid 1488): mount_ubifs: max.znode size 320[ 37.096070] [978307260] UBIFS DBG (pid 1488): mount_ubifs: max.index node size 192[ 37.104634] [978307260] UBIFS DBG (pid 1488): mount_ubifs: nodesizes: data 48, inode 160, dentry 56

[ 37.115718] [978307260] UBIFS DBG (pid 1488): mount_ubifs: nodesizes: trun 56, sb 4096, master 512[ 37.126706] [978307260] UBIFS DBG (pid 1488): mount_ubifs: nodesizes: ref 64, cmt. start 32, orph 32[ 37.137889] [978307260] UBIFS DBG (pid 1488): mount_ubifs: max. nodesizes: data 4144, inode 4256 dentry 312, idx 188[ 37.150127] [978307260] UBIFS DBG (pid 1488): mount_ubifs: deadwatermark: 56[ 37.158597] [978307260] UBIFS DBG (pid 1488): mount_ubifs: darkwatermark: 4256



[ 37.167257] [978307260] UBIFS DBG (pid 1488): mount_ubifs: LEBoverhead: 2480[ 37.175917] [978307260] UBIFS DBG (pid 1488): mount_ubifs: max. darkspace: 553280 (540 KiB, 0 MiB)[ 37.186420] [978307260] UBIFS DBG (pid 1488): mount_ubifs: maximumbud bytes: 654721 (639 KiB, 0 MiB)[ 37.196931] [978307260] UBIFS DBG (pid 1488): mount_ubifs: BG commitbud bytes: 523777 (511 KiB, 0 MiB)[ 37.207435] [978307260] UBIFS DBG (pid 1488): mount_ubifs: currentbud bytes 70368 (68 KiB, 0 MiB)[ 37.217743] [978307260] UBIFS DBG (pid 1488): mount_ubifs: max. seq.number: 82144[ 372016 Jun 16 17:28:36 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE:Module 24 removed (Serial number SAL1941QTXW)40.71: Partition /mnt/plog looks good.40.76: Checking obfl mtdrr/mtdoops ...[ 45.729331] [978307269] cctrl DBG: init_module ===> callingcctrl_platform_reg(31)[ 45.729337] [978307269][ 45.740633] [978307269] cctrl DBG: init_module ===> calling

cctrli_sdwrap_init()[ 45.740637] [978307269][ 45.753953] [978307269] cctrl DBG: init_module Startuser_passed_card_mode = 0[ 45.762029] [978307269] cctrl DBG: init_module ===> callingcctrl_main_global_table()[ 45.762034] [978307269][ 45.773604] [978307269] cctrl DBG: init_module ===> callingcctrl_platform_init()[ 45.773609] [978307269][ 45.784789] [978307269] cctrl DBG: cctrl_lc2_fc2_platform_init Start[ 45.791895] [978307269] cctrl DBG: cctrl_lc2_fc2_pci_initRegistering iofpga PCI driver[ 45.801027] [978307269] cctrl DBG: cctrl_lc2_fc2_pci_probe_funcPROBE: Bus 0x1 Vendor 0x1137 device 0x101[ 45.811736] [978307269] cctrl DBG: cctrl_lc2_fc2_pci_probe_funcCheck Bus 0x1 Vendor 0x1137 device 0x101[ 45.822335] [978307269] cctrl DBG: cctrl_lc2_fc2_pci_setup Enablingthe FPGA PCI device id 257[ 45.831966] [978307269] cctrl DBG: cctrl_lc2_fc2_pci_setup IOFPGAPCI BAR 0x0 ADDR 0x88000000 SIZE 0x400[ 45.842565] [978307269] cctrl INFO: cctrl_lc2_fc2_pci_setup New GotFPGA 0x1137:0x101 on bus 0x1 size 0x400[ 45.853604] [978307269] cctrl 0000:01:00.0: irq 55 for MSI/MSI-X[ 45.860502] [978307269] cctrl INFO: cctrl_lc2_fc2_pci_msi_irq_initpci_enable_msi OK[ 45.869711] [978307269] cctrl INFO: cctrl_lc2_fc2_pci_msi_irq_init

cctrl_lc2_fc2_pci_msi_irq_init: request_irq 55 (rc=0) OK[ 45.882159] [978307269] cctrl INFO: cctrl_lc2_fc2_pci_setup FPGA devsetup done: Vendor 0x1137 dev 0x101 bus 0x1[ 45.893947] [978307269] cctrl DBG: cctrl_lc2_fc2_pci_initpci_register_driver pci_count = 0[ 45.903296] [978307269] cctrl DBG: cctrl_lc2_fc2_pci_initRegistering mifpga PCI driver[ 45.912402] [978307269] cctrl DBG: cctrl_lc2_fc2_pci_probe_funcPROBE: Bus 0x2 Vendor 0x1137 device 0x103[ 45.923101] [978307269] cctrl DBG: cctrl_lc2_fc2_pci_probe_func



Check Bus 0x2 Vendor 0x1137 device 0x103[ 45.933690] [978307269] cctrl DBG: cctrl_lc2_fc2_pci_setup Enablingthe FPGA PCI device id 259[ 45.943417] [978307269] cctrl DBG: cctrl_lc2_fc2_pci_setup MIFPGAPCI BAR 0x0 ADDR 0xd0400000 SIZE 0x400[ 45.954019] [978307269] cctrl INFO: cctrl_lc2_fc2_pci_setup New GotFPGA 0x1137:0x103 on bus 0x2 size 0x400[ 45.965045] [978307269] cctrl-mi 0000:02:00.0: irq 56 for MSI/MSI-X[ 45.972235] [978307269] cctrl INFO: cctrl_lc2_fc2_pci_msi_irq_initpci_enable_msi OK[ 45.981430] [978307269] cctrl INFO: cctrl_lc2_fc2_pci_msi_irq_initcctrl_lc2_fc2_pci_msi_irq_init: request_irq 56 (rc=0) OK[ 45.993879] [978307269] cctrl INFO: cctrl_lc2_fc2_pci_setup FPGA devsetup done: Vendor 0x1137 dev 0x103 bus 0x2[ 46.005568] [978307269] cctrl DBG: cctrl_lc2_fc2_pci_initpci_register_driver pci_count = 0[ 46.014910] [978307269] cctrl DBG: cctrl_lc2_fc2_platform_init StartLC2 Portlib[ 46.023181] [978307269] cctrl DBG: cctrl_lc2_portlib_platform_initStart

[ 46.030675] [978307269] cctrl: cctrl_lc2_portlib_platform_init (210)[ 46.037880] [978307269] cctrl: cctrl_lc2_portlib_map_devid_to_pld(155) pci_devid 0x1 inst 0x0 pldInst 0xffffffff[ 46.049352] [978307269] cctrl: cctrl_lc2_portlib_mi_isr_struct_init(467)[ 46.057039] [978307269] cctrl: cctrl_lc2_portlib_mi_isr_struct_init(475) sfp_n_grp 0x0[ 46.065987] [978307269] cctrl: cctrl_lc2_portlib_mi_isr_struct_init(476) sfp_n_grp 0x290[ 46.075139] [978307269] cctrl: cctrl_lc2_portlib_mi_isr_struct_init(477) sfp_n_grp 0x294[ 46.084282] [978307269] cctrl: cctrl_lc2_portlib_mi_isr_struct_init(478) sfp_n_grp 0x2[ 46.093231] [978307269] cctrl DBG: cctrl_lc2_portlib_platform_initcctrl_lc2_portlib_platform_init.454: LC2 PCI init ..[ 46.093236] [978307269][ 46.108200] [978307269] cctrl DBG: cctrl_lc2_portlib_platform_initcctrl_lc2_portlib_platform_init.463: LC2 access init ..[ 46.108205] [978307269][ 46.123460] [2016 Jun 16 17:28:36 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detected the presence of Module 24978307269] cctrl: cctrl_lc2_portlib_specific_init (868) Initing the LC2functions.[ 46.133281] [978307269] cctrl DBG: cctrl_lc2_portlib_platform_initEnd[ 46.140654] [978307269] lc2_portlib_fpga_test_init[ 46.146308] [978307269] lc2_portlib_fpga_test_init sc char major dev

247[ 46.153881] [978307269] cctrl INFO: cctrl_access_init Window 0 h/wbase 0x88000000 ioremap 0xffffc90004278000 size 0x400[ 46.166078] [978307269] cctrl INFO: cctrl_access_init Window 1 h/wbase 0xd0400000 ioremap 0xffffc9000427a000 size 0x500[ 46.178241] [978307269] cctrl DBG: cctrl_lc2_fc2_platform_init End[ 46.185206] [978307269] lc_fpga_test_init lc char major dev 246[ 46.191832] [978307269] cctrl DBG: init_module ===> callingcctrl_global_init()[ 46.191836] [978307269]



[ 46.202828] [978307269] cctrl DBG: cctrl_lc2_fc2_get_table_sizeSIZE: win 0 size 1024 type 0[ 46.212262] [978307269] cctrl DBG: cctrl_lc2_fc2_get_table_sizeSIZE: win 0 size 1025 type 1[ 46.221698] [978307269] cctrl DBG: cctrl_update_lkup_table win 0ltbl_ent 1025 gtbl_ent 1024 startsig 0 endsig 1023 reglow 0 reghi 1024[ 46.235381] [978307269] cctrl DBG: cctrl_lc2_fc2_get_table_sizeSIZE: win 1 size 1072 type 0[ 46.244816] [978307269] cctrl DBG: cctrl_lc2_fc2_get_table_sizeSIZE: win 1 size 1073 type 1[ 46.254250] [978307269] lc2_portlib_fpga_test_timer_handler data0x0[ 46.261457] [978307269] cctrl DBG: cctrl_update_lkup_table win 1ltbl_ent 1073 gtbl_ent 1072 startsig 0 endsig 1072 reglow 0 reghi 1280[ 46.275142] [978307269] cctrl DBG: cctrl_global_init Total windows =2[ 46.282442] [978307269] Total windows = 2[ 46.286735] [978307269] cctrl DBG: init_module ===> callingcctrl_cmn_init()[ 46.286739] [978307269]

[ 46.297635] [978307269] calling cctrl_set_module_status_led ...[ 46.304259] [978307269] calling sys_srv_register_multiple ...[ 46.310733] [978307269] sys_reinit_card_mode:[insmod:1695]: readcard_mode_reg = 0[ 46.319198] [978307269] cctrl DBG: init_module Card Mode = 1[ 46.325533] [978307269] cctrl INFO: cctrl_lc2_fc2_check_revs Win 0expected 0x4 got 0x5 signal 0x0[ 46.335561] [978307269] cctrl INFO: cctrl_lc2_fc2_check_revs Win 1expected 0x1 got 0x5 signal 0x0[ 46.345577] [978307269] cctrl DBG: init_module aftercctrl_check_revs()[ 46.345581] [978307269][ 46.355797] [978307269] slot id from cctrl reg is 24[ 46.361351] [978307269] cctrl DBG: init_modulecctrl_card_prsnt_mask = 8[ 46.361355] [978307269][ 46.371761] [978307269] cctrl DBG: init_module callingcctrl_misc_init()[ 46.371765] [978307269][ 46.382075] [978307269] Registered LC sup_ok Interrupt[ 46.387634] [978307269] cctrl: cctrl_lc2_portlib_start_auto_poll(260) dev type 0x0[ 46.396588] [978307269] cctrl: cctrl_lc2_portlib_port_init (854)QSFP CTRL address 0x264[ 46.405635] [978307269] cctrl: cctrl_lc2_portlib_port_init (854)QSFP CTRL address 0x2c4[ 46.414682] [978307269] cctrl: cctrl_lc2_portlib_port_init (854)

QSFP CTRL address 0x324[ 46.423728] [978307269] cctrl: cctrl_lc2_portlib_port_init (854)QSFP CTRL address 0x384[ 46.432775] [978307269] cctrl: cctrl_lc2_portlib_port_init (854)QSFP CTRL address 0x3e4[ 46.441821] [978307269] cctrl_lc2_portlib_qsfp_autopoll_all (179)[ 46.448830] [978307269] cctrl: cctrl_lc2_portlib_qsfp_autopoll (150)op_type 0x0 inst 0x1[ 46.458073] [978307269] cctrl:cctrl_lc2_portlib_auto_poll_busy_status (63) reg_addr 0x268 mask 0xff



delay 0xf4240[ 46.469728] [978307269] cctrl:cctrl_lc2_portlib_auto_poll_busy_status (64) win addr 0x427a268[ 47.503398] [978307270] cctrl ERROR:cctrl_lc2_portlib_auto_poll_busy_status auto poll timed out reg addr0x268, mask 0xff,tmp_data 0xff[ 47.517092] [978307270] cctrl: cctrl_lc2_portlib_qsfp_autopoll (150)op_type 0x0 inst 0x9[ 47.526336] [978307270] cctrl:cctrl_lc2_portlib_auto_poll_busy_status (63) reg_addr 0x2c8 mask 0xffdelay 0xf4240[ 47.538000] [978307270] cctrl:cctrl_lc2_portlib_auto_poll_busy_status (64) win addr 0x427a2c8[ 2016 Jun 16 17:28:47 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module24 removed (Serial number SAL1941QTXW)//ins_tor.bin: 68.47 MB24.85 MB/sPopulate TOR files to LC...Sourcing /etc/rc.d/include/rcS.includeExecuting /etc/rcS.d/S330post-cctrl ...

55.50: Installing klm_obfl ...Installing klm_obfl..55.85: Installing sprom ...55.92: Installing sprom ...Installing klm_dc_sprom..56.74: Installing klm_pfmsvcs ...Installing klm_pfmsvcs..Sourcing /etc/rc.d/include/rcS.includeExecuting /etc/rcS.d/S33mts ...57.30: Installing aipc ...57.53: Installing mts ...Configuring network interfaces... done.Starting portmap daemon...Sourcing /etc/rc.d/include/rcS.includeExecuting /etc/rcS.d/S45download-from-sup ...59.97: Setting active SUP 27/var/log/time: 4.00 kB227.44 B/s/var/log/date: 4.00 kB276.88 B/sThu Jun 16 17:28:44 UTC 2016/etc/localtime: 118.00 B2.90 kB/s/etc/isan.timezone: 0.00 B0.00 B/sCannot open local file /bootflash/platform.inf.slot4 for writing: Nosuch file or directory.

ncftpget /var/sysmgr/ftp/platform.inf.slot4: could not open file.net.ipv4.conf.default.rp_filter = 1net.ipv4.conf.all.rp_filter = 1Sourcing /etc/rc.d/include/rcS.includeExecuting /etc/rcS.d/S55patchrpm .../var/sysmgr/tmp/patching_meta.inf: 0.00 B0.00 B/s62.00: downloaded patchrpm listrm: cannot remove `/var/sysmgr/tmp/patches/*.rpm': No such file ordirectory



Starting xinetd: OKSourcing /etc/rc.d/include/rcS.include^R^EExecuting /etc/rcS.d/S70install_klms ...62.49: Installing KLMs62.53: Installing klm_utaker ...62.57: Installing utaker ...63.50: Installing klm_vdc_mgr ...Installing klm_vdc_mgr..[ 64.802034] [978307288] vdc_module_init max_allowed_vdc=8max_allowed_vdc_cli=2[ 64.810252] [978307288] Init vdc_mgr klm63.67: Installing pss ...Installing klm_pss..63.88: Installing kfsmutils ...Installing klm_kfsmutils..64.00: Installing mts_trace ...Installing klm_mts_trace..64.12: Installing kadb ...Installing klm_kadb..64.26: Installing klm_tlv ...

Installing klm_tlv..64.37: Installing klm_cctrl_bg ...Installing klm_cctrl_bg..64.48: Installing klm_lc_diag_stat ...Installing klm_lc_diag_stat..64.60: Installing klm_if_index ...Installing klm_if_index..[ 65.886799] [978307289] hwport mode=064.71: Installing klm_usd ...Installing klm_usd..64.83: Installing klm_mvdxn ...Installing klm_mvdxn..

[ 66.117192] [978307289] mvdxn_driver_init[ 66.122014] [978307289] maj2016 Jun 16 17:28:47 ch27 %$ VDC-1 %$%PLATFORM-2-MOD_PRESENT: Detected the presence of Module 24or number 238[ 66.126439] [978307289] mvdxn_driver_init finished[ 66.131837] [978307289] mvdxn_driver Registered syssrv64.99: Installing klm_emon ...Installing klm_emon..[ 66.277563] [978307289] Entering init_module for EMON, slot id:3[ 66.285469] [978307289] EMON Reading card id: 21105[ 66.290971] [978307289] EMON Trying card id: 21000 config[ 66.297043] [978307289] EMON Trying card id: 21014 config[ 66.303112] [978307289] EMON Trying card id: 21008 config[ 66.309181] [978307289] EMON Trying card id: 21004 config[ 66.315250] [978307289] EMON Trying card id: 21009 config

[ 66.321325] [978307289] EMON Trying card id: 21007 config[ 66.327394] [978307289] EMON Trying card id: 21050 config[ 66.333462] [978307289] EMON Trying card id: 21051 config[ 66.339530] [978307289] EMON Trying card id: 21052 config[ 66.345599] [978307289] EMON Trying card id: 21057 config[ 66.351667] [978307289] EMON Trying card id: 21070 config[ 66.357736] [978307289] EMON Trying card id: 21071 config[ 66.363830] [978307289] EMON Trying card id: 21072 config[ 66.369902] [978307289] EMON Trying card id: 21013 config[ 66.375971] [978307289] EMON Trying card id: 21053 config



[ 66.382042] [978307289] EMON Trying card id: 21055 config[ 66.388236] [978307289] EMON Trying card id: 21100 config[ 66.394315] [978307289] EMON Trying card id: 21104 config[ 66.400386] [978307289] EMON Trying card id: 21001 config[ 66.406457] [978307289] EMON Trying card id: 21006 config[ 66.412526] [978307289] EMON Trying card id: 21010 config[ 66.418594] [978307289] EMON Trying card id: 21005 config[ 66.424663] [978307289] EMON Trying card id: 21016 config[ 66.430731] [978307289] EMON Trying card id: 21015 config

Wind River Linux 5.0.1.13 lc4 console

lc4 login: adminmodule-4#module-4#module-4#module-4# 2016 Jun 16 17:29:20 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE:Module 24 removed (Serial number SAL1941QTXW)2016 Jun 16 17:29:20 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 24

module-4# 2016 Jun 16 17:29:30 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE:Module 24 removed (Serial number SAL1941QTXW)2016 Jun 16 17:29:30 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:29:31 ch27 %$ VDC-1 %$ %ACLQOS-SLOT22-2-ACLQOS_FAILED:ACLQOS failure: TCAM region is not configured for feature QoS classIPv4 direction ingress. Please configure TCAM region Ingress SUP [ing-sup] and retry the command.

module-4#module-4#module-4#module-4# exiting....

[EOT]ch27#ch27# sh module 2016 Jun 16 17:29:41 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24 removed (Serial number SAL1941QTXW)2016 Jun 16 17:29:41 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 24

Mod Ports Module-Type ModelStatus--- ----- ------------------------------------- --------------------- ---------2 36 36x100G Ethernet Module N9K-X9736C-E

powered-dn3 36 36x100G Ethernet Module N9K-X9736C-EXtesting4 32 32x100G Ethernet Module N9K-X9732C-EXtesting22 0 4-slot Fabric Module N9K-C9504-FM-Eok24 0 Unknown Modulepresent27 0 Supervisor Module N9K-SUP-A



active *28 0 Supervisor Module N9K-SUP-Aha-standby29 0 System Controller N9K-SC-Aactive30 0 System Controller N9K-SC-Astandby


Mod Sw Hw Slot--- ---------------- ------ ----3 7.0(3)I4(1.25) 0.1010 LC34 7.0(3)I4(1.25) 0.1040 LC422 7.0(3)I4(1.25) 0.1010 FM227 7.0(3)I4(1.42) 1.5 SUP128 7.0(3)I4(1.42) 1.5 SUP229 7.0(3)I4(1.42) 1.4 SC1

30 7.0(3)I4(1.42) 1.4 SC2

--More--2016 Jun 16 17:29:47 ch27 %$ VDC-1 %$ %SYSMGR-SLOT22-2-HAP_FAILURE_SUP_RESET: Service "xbar_client" in vdc 1 has had a hapfailure2016 Jun 16 17:29:50 ch27 %$ VDC-1 %$ %MODULE-2-MOD_DIAG_FAIL: Module22 (Serial number: SAL1941QTXL) reported failure due to Service onlinecard had a hap-reset in device DEV_SYSMGR (device error 0x49)2016 Jun 16 17:29:51 ch27 %$ VDC-1 %$ %SYSMGR-SLOT3-2-HAP_FAILURE_SUP_RESET: Service "xbar_client" in vdc 1 has had a hapfailure2016 Jun 16 17:29:52 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)2016 Jun 16 17:29:52 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:29:53 ch27 %$ VDC-1 %$ %MODULE-2-MOD_DIAG_FAIL: Module 3(Serial number: SAL2004XTWV) reported failure due to Service onlinecard had a hap-reset in device DEV_SYSMGR (device error 0x49)2016 Jun 16 17:29:54 ch27 %$ VDC-1 %$ %VMM-2-VMM_SERVICE_ERR: VDC1:Service SAP Ethpm SAP for slot 3 returned error 0x40e1000f (No cardfound in slot) in if_bind sequence2016 Jun 16 17:30:03 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)2016 Jun 16 17:30:03 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:30:14 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)

2016 Jun 16 17:30:14 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:30:25 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)2016 Jun 16 17:30:25 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 24

Mod MAC-Address(es) Serial-Numch27# sh moduleMod Ports Module-Type Model



Status--- ----- ------------------------------------- --------------------- ---------2 36 36x100G Ethernet Module N9K-X9736C-Epowered-dn3 36 36x100G Ethernet Modulepwr-cycld4 32 32x100G Ethernet Module N9K-X9732C-EXtesting22 0 4-slot Fabric Modulepwr-cycld24 0 Unknown Modulepresent27 0 Supervisor Module N9K-SUP-Aactive *28 0 Supervisor Module N9K-SUP-Aha-standby29 0 System Controller N9K-SC-Aactive30 0 System Controller N9K-SC-A

standby

Mod Power-Status Reason--- ------------ ---------------------------2 powered-dn Configured Power down3 pwr-cycld Unknown. Issue show system reset mod ...22 pwr-cycld Unknown. Issue show system reset mod ...

Mod Sw Hw Slot--- ---------------- ------ ----4 7.0(3)I4(1.25) 0.1040 LC427 7.0(3)I4(1.42) 1.5 SUP128 7.0(3)I4(1.42) 1.5 SUP2--More--2016 Jun 16 17:30:36 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE:Module 24 removed (Serial number SAL1941QTXW)2016 Jun 16 17:30:36 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 2429 7.0(3)I4(1.42) 1.4 SC1ch27#ch27#ch27#ch27#ch27# sh module 2016 Jun 16 17:30:47 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24 removed (Serial number SAL1941QTXW)2016 Jun 16 17:30:47 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 24

Mod Ports Module-Type ModelStatus--- ----- ------------------------------------- --------------------- ---------2 36 36x100G Ethernet Module N9K-X9736C-Epowered-dn3 36 36x100G Ethernet Modulepwr-cycld4 32 32x100G Ethernet Module N9K-X9732C-EXtesting



22 0 4-slot Fabric Modulepwr-cycld24 0 Unknown Modulepresent27 0 Supervisor Module N9K-SUP-Aactive *28 0 Supervisor Module N9K-SUP-Aha-standby29 0 System Controller N9K-SC-Aactive30 0 System Controller N9K-SC-Astandby


Mod Sw Hw Slot

--- ---------------- ------ ----4 7.0(3)I4(1.25) 0.1040 LC427 7.0(3)I4(1.42) 1.5 SUP128 7.0(3)I4(1.42) 1.5 SUP2ch27#ch27#ch27# 2016 Jun 16 17:30:58 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE:Module 24 removed (Serial number SAL1941QTXW)2016 Jun 16 17:30:58 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:31:09 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)2016 Jun 16 17:31:09 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:31:20 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)2016 Jun 16 17:31:20 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 24\ch27#ch27#ch27#ch27# \ch27# sh module 2016 Jun 16 17:31:31 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24 removed (Serial number SAL1941QTXW)2016 Jun 16 17:31:31 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 24

Mod Ports Module-Type ModelStatus--- ----- ------------------------------------- --------------------- ---------2 36 36x100G Ethernet Module N9K-X9736C-Epowered-dn3 36 36x100G Ethernet Modulepwr-cycld4 32 32x100G Ethernet Module N9K-X9732C-EX



initializing22 0 4-slot Fabric Modulepwr-cycld24 0 Unknown Modulepresent27 0 Supervisor Module N9K-SUP-Aactive *28 0 Supervisor Module N9K-SUP-Aha-standby29 0 System Controller N9K-SC-Aactive30 0 System Controller N9K-SC-Astandby


Mod Sw Hw Slot--- ---------------- ------ ----4 7.0(3)I4(1.25) 0.1040 LC427 7.0(3)I4(1.42) 1.5 SUP1--More--2016 Jun 16 17:31:38 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_DETECT:Module 22 detected (Serial number SAL1941QTXL) Module-Type 4-slotFabric Module Model N9K-C9504-FM-E2016 Jun 16 17:31:38 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PWRUP: Module 22powered up (Serial number SAL1941QTXL)28 7.0(3)I4(1.42) 1.5 SUP229 7.0(3)I4(1.42) 1.4 SC1--More--2016 Jun 16 17:31:42 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE:Module 24 removed (Serial number SAL1941QTXW)ch27# 2016 Jun 16 17:31:42 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT:Detected the presence of Module 24

ch27#ch27#ch27#ch27#ch27# sh moduleMod Ports Module-Type ModelStatus--- ----- ------------------------------------- --------------------- ---------2 36 36x100G Ethernet Module N9K-X9736C-E

powered-dn3 36 36x100G Ethernet Modulepwr-cycld4 32 32x100G Ethernet Module N9K-X9732C-EXinitializing22 0 4-slot Fabric Module N9K-C9504-FM-Epowered-up24 0 Unknown Modulepresent



27 0 Supervisor Module N9K-SUP-Aactive *28 0 Supervisor Module N9K-SUP-Aha-standby29 0 System Controller N9K-SC-Aactive30 0 System Controller N9K-SC-Astandby

Mod Power-Status Reason--- ------------ ---------------------------2 powered-dn Configured Power down3 pwr-cycld Unknown. Issue show system reset mod ...

Mod Sw Hw Slot--- ---------------- ------ ----4 7.0(3)I4(1.25) 0.1040 LC422 7.0(3)I4(1.25) 0.1010 FM227 7.0(3)I4(1.42) 1.5 SUP1--More--2016 Jun 16 17:31:53 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE:

Module 24 removed (Serial number SAL1941QTXW)2016 Jun 16 17:31:53 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:31:56 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_DETECT: Module 3detected (Serial number SAL2004XTWV) Module-Type 36x100G EthernetModule Model N9K-X9736C-EX2016 Jun 16 17:31:56 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PWRUP: Module 3powered up (Serial number SAL2004XTWV)2016 Jun 16 17:32:04 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)2016 Jun 16 17:32:04 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 2428 7.0(3)I4(1.42) 1.5 SUP229 7.0(3)I4(1.42) 1.4 SC1ch27# sh moduleMod Ports Module-Type ModelStatus--- ----- ------------------------------------- --------------------- ---------2 36 36x100G Ethernet Module N9K-X9736C-Epowered-dn3 36 36x100G Ethernet Module N9K-X9736C-EXtesting4 32 32x100G Ethernet Module N9K-X9732C-EXinitializing22 0 4-slot Fabric Module N9K-C9504-FM-E

testing24 0 Unknown Modulepresent27 0 Supervisor Module N9K-SUP-Aactive *28 0 Supervisor Module N9K-SUP-Aha-standby29 0 System Controller N9K-SC-Aactive30 0 System Controller N9K-SC-A



standby


Mod Sw Hw Slot--- ---------------- ------ ----3 7.0(3)I4(1.25) 0.1010 LC34 7.0(3)I4(1.25) 0.1040 LC422 7.0(3)I4(1.25) 0.1010 FM227 7.0(3)I4(1.42) 1.5 SUP1--More--2016 Jun 16 17:32:15 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE:Module 24 removed (Serial number SAL1941QTXW)2016 Jun 16 17:32:15 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:32:26 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)2016 Jun 16 17:32:26 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 24

2016 Jun 16 17:32:37 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)2016 Jun 16 17:32:37 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:32:48 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)2016 Jun 16 17:32:48 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:32:59 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)2016 Jun 16 17:32:59 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:33:10 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)2016 Jun 16 17:33:10 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:33:21 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)2016 Jun 16 17:33:21 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:33:32 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)2016 Jun 16 17:33:32 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:33:43 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)2016 Jun 16 17:33:43 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detected

the presence of Module 242016 Jun 16 17:33:54 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)2016 Jun 16 17:33:54 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:34:05 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)2016 Jun 16 17:34:05 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:34:16 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24



removed (Serial number SAL1941QTXW)2016 Jun 16 17:34:16 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:34:27 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)2016 Jun 16 17:34:27 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:34:38 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)2016 Jun 16 17:34:38 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:34:49 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)2016 Jun 16 17:34:49 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:35:00 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)2016 Jun 16 17:35:00 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:35:11 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24

removed (Serial number SAL1941QTXW)2016 Jun 16 17:35:11 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:35:22 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)2016 Jun 16 17:35:22 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:35:33 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)2016 Jun 16 17:35:33 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:35:44 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)2016 Jun 16 17:35:44 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:35:55 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)2016 Jun 16 17:35:55 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:36:06 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)2016 Jun 16 17:36:06 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:36:17 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)2016 Jun 16 17:36:17 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 24

2016 Jun 16 17:36:28 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)2016 Jun 16 17:36:28 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:36:39 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)2016 Jun 16 17:36:39 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:36:47 ch27 %$ VDC-1 %$ %MODULE-2-MOD_FAIL:Initialization of module 22 (Serial number: SAL1941QTXL) failed



2016 Jun 16 17:36:47 ch27 %$ VDC-1 %$ last message repeated 1 time2016 Jun 16 17:36:47 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PWRDN: Module 22powered down (Serial number SAL1941QTXL)2016 Jun 16 17:36:47 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_ALL_PARTIAL_LC_PWRDN_NOFM: Partially connected line-card modulespowered down due to no connectivity with existing fabric modules2016 Jun 16 17:36:48 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PWRDN: Module 3powered down (Serial number SAL2004XTWV)2016 Jun 16 17:36:49 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PWRDN: Module 4powered down (Serial number SAL2009ZNT2)2016 Jun 16 17:36:53 ch27 %$ VDC-1 %$ %ASCII-CFG-2-CONF_CONTROL: Systemready2016 Jun 16 17:36:54 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:36:54 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)2016 Jun 16 17:37:03 ch27 %$ VDC-1 %$ last message repeated 1 time2016 Jun 16 17:37:03 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:37:14 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24

removed (Serial number SAL1941QTXW)2016 Jun 16 17:37:14 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:37:25 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)2016 Jun 16 17:37:25 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:37:36 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)2016 Jun 16 17:37:36 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 242016 Jun 16 17:37:47 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_REMOVE: Module 24removed (Serial number SAL1941QTXW)2016 Jun 16 17:37:47 ch27 %$ VDC-1 %$ %PLATFORM-2-MOD_PRESENT: Detectedthe presence of Module 24

last login

Documents