lathe-milling machining contents. geometry model in this example the part is an imported 3d model...
TRANSCRIPT
Lathe-milling machiningLathe-milling machining
Contents
Geometry modelGeometry model
In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry environment.
Workpiece contour
3D model of the part
Forlder containing geometry of impoerted 3D model
Folder containing workpiece contour named after the coordinate system it was created in
Contents
Machine parameters Machine parameters
Start the Machine parameters dialog
Machine parameters dialog
List of available machines
Desired machine
Select the MaxTurn65 machine.
Contents
MachineMachine
MaxTurn 65 machine
Part
MaxTurn 65 machine
Contents
The PartThe Part
SprutCAM automatically assigns the imported model as the Part for machining.
Imported part model
Contents
The WorkpieceThe Workpiece
The workpiece is created as the solid of rotation of the workpiece contour.
Workpiece contour
2D Geometry code defining the workpiece contour curve
2D Geometry mode
Workpiece - Solid of rotation of the workpiece contour
Workpiece contour curve
Machining mode
Workpiece tab
Contents
Create operationCreate operation
The first operation is the Lathe Facing.
Create operation menu
Roughing operations group
Lathe Facing operation
New operation
Contents
Select tool holderSelect tool holder
Tool holder
List of available toolhoders
Tool
Machine setup tab
Contents
Operation parametersOperation parameters
Contents
ToolpathToolpath
Calculate toolpath
Toolpath
Toolpath calculation is successful
Contents
Machining simulationMachining simulation
Workpiece
Machining simulation result
Contents
Create operationCreate operation
The next opeartion - Lathe Roughing. We use Fill parameters option to pass parameters of the previous operation.
Create operation menu
Roughing operations group
Lathe Facing operation
Fill parameters option passes parameters from the previous operation into the new one
New operation
Contents
Job assignmentJob assignment
Job assignment
Job assignment
Select method of assigning machining job
Method – between two points
Job assignment – an area of the contour of the rotation solid of the part
Contents
Job assignment and parametersJob assignment and parameters
We used the Fill parameters option to create the new operation so all parameters (job assignment and machining parameters) were copied from the previous operation
Toolholder
Tool
Part
Workpiece
Contents
Toolpath calculationToolpath calculation
Run toolpath calculation
Toolpath
Calculation successful
Contents
Machining simulation Machining simulation
Machining result of the previous operation
Simulation result
Contents
Create operationCreate operation
Create operation menu
Roughing operations group
Lathe Finishing operation
New operation
Contents
Select toolholderSelect toolholder
Toolholder
List of toolholders
Tool
Contents
Job assignmentJob assignment
Job assignment contour curve
Job assignment tab
Job assignment method
Method – between two points
Job assignment – an area of the part contour
Contents
Machining parametersMachining parameters
Contents
ToolpathToolpath
Calculate toolpath
Toolpath
Calculation successful Toolpath
Contents
Machining simulationMachining simulation
Result of previous opearions machining
Machining result
Contents
Create operationCreate operation
Create operation menu
Roughing operations group
Lathe Drilling operation
New operation
Contents
Job assignmentJob assignment
Lathe Drilling operation’s job assihment is the automatically defined hole of the 3D model whose axis coincides with the spindle rotation axis
Job assignment contour curve
Job assignment tab
Job assignment – an area of the part’s contour
Contents
Toolholder selectionToolholder selection
Toolholder
List of toolholdersTool
Contents
Machining parametersMachining parameters
Contents
ToolpathToolpath
Compute the toolpath
Toolpath
Contents
Machining simulationMachining simulation
Machining result of previous operations
Machining result
Contents
Create operationCreate operation
Create operation menu
Finishing operations group
2D contouring operation
New operation
Contents
Job assignmentJob assignment
Octahedrons edge
Job assignment tab
Octahedrons edge
Surfaces defining top and bottom machining levels
Surfaces specifying top and bottom levels of machining
Job assignment
Contents
Select toolholderSelect toolholder
Toolholder
List of toolholdersTool
Contents
Machining parametersMachining parameters
Contents
ToolpathToolpath
Run toolpath calculation
Toolpath
Contents
Machining simulationMachining simulation
Machining result of previous operations
Machining result
Contents
Create operationCreate operation
Start create operation dialog
Finishing operations group
2D contouring operation
Use Fill parameters option to pass parameters from one of previous operations to the new one
New operation
Contents
Job assignmentJob assignment
We used Fill parameters option to pass parameters of the previous 2D contouring operation to the new operation. Therefore we only change the job assignment for the newly created 2D contouring operation
Surface edge as the job assignment
Job assignment tab
Job assignment
Surface edge as the job assignment
Surfaces defining top and bottom levels of machining
Contents
Toolpath calculationToolpath calculation
Run toolpath calculation
Toolpath
Contents
Machining simulationMachining simulation
Machining result of previous operations
Result of machining simulation
Contents
Create new operationCreate new operation
Create operation menu
Group of finishing operations
2D contouring operation
New operation
Contents
Job assignmentJob assignment
Edge of the slot bottom
Job assignment tab
Slot bottom edge
Surfaces bounding top and bottom levels of machining
Job assignment
Contents
Select toolholderSelect toolholder
Toolholder
List of toolholdersTool
Contents
Machining parametersMachining parameters
Contents
ToolpathToolpath
Расчет траектории
Toolpath
Contents
Machining simulationMachining simulation
Machining result of previous operations
Machining result
Contents
Create new operationCreate new operation
Create operation menu
Roughing operations group
Hole machining 5D operation
New operation
Contents
Select toolholderSelect toolholder
Toolholder
List of toolholders Tool
Contents
Job assignmentJob assignment
Job assignment tab
Inner surfaces of holes
Рабочее заданиеJob assignment method
Job assignment
Contents
Machining parametersMachining parameters
Contents
ToolpathToolpath
Calculate toolpath
Toolpath
Contents
Machining simulationMachining simulation
Machining result of previous operations
Result of machining
Contents
Tools listTools list
Create tools list
Tools list dialogViews configuration
Object visibility panel
Document header
Contents
Tools listTools list
List of operations
Document header
List of tools
Machining time
Views of geometry model
Contents
PostprocessorsPostprocessors
Generate NC-program
Postprocessor configuration file
NC-program file
NC-program listing
Contents