laudio thermo en - maderas de llodio · laudio thermo product specifications european radiata pine...
TRANSCRIPT
LAUDIO THERMO
Plywood board for indoor and outdoor use. Made with peeled veneer of European Radiata pine wood (2.1 – 3.1 mm thick), glued with phenol resin, waterproof (WBP), hot pressed and polymerised under pressure. Boards are then thermally modified, calibrated and sanded.
TECHNICAL VENEER PLYWOOD FORDECORATIVE APPLICATIONS
RESISTANCE
SUSTAINABLE
PROFITABILITY
ANTI-HUMIDITY
7
9
10
10
LAUDIO THERMOPRODUCT SPECIFICATIONSEuropean Radiata pine plywood boards repaired, thermally modified, calibrated and sanded. Advantages of thermally modified wood:1. Greater dimensional stability in thickness. Up to 50% less variation than in untreated
wood.2. Greater thermal insulation capability as regards ply.3. Higher resistance to meteorological and biological changes and to fungus attack.4. Lighter.5. Natural, even colouring (darker, toasted brown) with a more prominent grain.
PRODUCT CERTIFICATESThis is an environmentally sustainable product, made from boards that help to fix the carbon footprint thanks to thermal modification with no added chemicals.
USES and APPLICATIONSType of use: 3.1.Outdoor use, above ground, protected.
FINISHESPly II: Sanded plywood board with knots repaired on both sides.Ply II/III: Calibrated, sanded plywood with knots repaired on one side.
THEORETICAL PHYSICAL & MECHANICAL PROPERTIES OF THE PRODUCT
DIMENSIONS (m)
DENSITY (+-5%)
THICKNESS (mm)
GRAIN DIRECTION
BENDING STRENGTH (n/mm2)
BENDING MODULUS OF ELASTICITY (n/mm2)
CHARACTERISTIC LEVELS FOR BENDING STRENGTH & AVERAGE LEVELS FOR MODULUS OF ELASTICITY AS PER STANDARD UNE-EN 789-1058. GUIDELINE FIGURES FOR GENERAL USE
DIMENSIONAL TOL. AS PER S/ UNE EN315
MADERAS DE LLODIO THICKNESSTOLERANCES
LENGTH-WIDTH: UP TO +-3.5 mm
SQUARENESS: 1 mm/m
THE FIGURES IN THE TABLE ARE FOR PRECONDITIONED PRODUCTS (RH: 65%, TEMP. 20ºC, 24H)
13,4 5,55
6.173 2.411
9
11,1 5,05
5.517 1.621
12
11,45 5,9
5.479 2.526
15
11,3 9,45
5.832 4.120
18
8,85 6,95
4.277 3.090
21
9,9 8,55
4.553 3.535
30
+-0.2 mm (ON ONE PANEL)
THINK BEFORE PRINTING
Polígono Ind. Santa Cruz s/n, 01400 Llodio (Álava) SpainPhone: +34 94 672 01 00 Fax: +34 94 672 05 [email protected]
MADERAS DE LLODIO S.A.
2,44 X 1,22 / 2,50 X 1,25 (*)
490 Kg/m3
RenewableResource
ThermalIsolation
ChemicalFree
Insect & RotResistant
Outdoor: • Cladding of facades• Garden furniture• Jetties & pool fencing• Information panels• Decking, balconies, viewing points
Indoor: • Bathrooms & saunas• Furnishings• Cladding
(*) Maderas de Llodio S.A. manufactures boards of other sizes to order. Please contact our commercial technicians.
Gluing quality: Class III exterior according to UNE EN 314-2
Intended use: external use as structural element, above ground, protected. Service class 3.1. EN 335
Formaldehyde emission: E1 according to UNE 717-2
Recommendations on handling, use and storage: see guide to good practice at www.maderasdellodio.com
Values or properties not shown on this sheet must be checked with technicians at Maderas de Llodio, S.A.
Maderas de Llodio reserves the right to modify the design of its products