lbxonline presents the lumberman's exchange magazine

INDUSTRIAL: MID-LEVEL: ENTRY-LEVEL:

800.553.0182WoodmizerIndustrial.com

If you want to take your operation to the next level, look to Wood-Mizer’s full line of resaws. With industrial, mid-level, and entry-level machines, these resaws help you reduce cost, increase yield, and grow profi ts.

Now is the time to revitalize your operation and get results with a Wood-Mizer ReSaw.

Rugged, high production, low maintenance

Extremely accurate, single and multi-head band resaws yield more lumber, value, and profi t

Breakdown cants with pinpoint accuracy

Thin-kerf provides higher yields and productivityItem ID: 12024Contact: DarenPh: 800-315-9950 x603

Item ID: 12027Contact: DarenPh: 800-315-9950 x603

DEALS OF THE MONTH

2005 CORDKING FIREWOOD PROC.

Since 1986 - The Original (800) 315-9950 or (615) 349-1890November 2010

2007 COOKS PORTABLE SAWMILL

w/portable edgerItem ID: 12017Contact: MichellePh: 800-315-9950 x606

CAT D4H TSK w/ WINCH & FORESTRY PKG.

See Photos online at www.LBXonline.com

Traveling Arch SawHydraulically controlledNo manual cuttingOur most popular turn key system

Portable Yard SawModel 200MP-7-SS GasModel 100MP-7-SS Electric3 inch side shift, a standard feature

Automatic Strapping SystemAttach bottom crossersSide squeeze incorporatedPolyester strap Flush End Bump Rollcase

Reduce or eliminate your end trims

L-M Deck Cut Off Saw3 foot to 12 foot bar lengthsHydraulically controlled

PALLET STOCK, STUDS, I-JOISTS, STRUCTURAL COMPONENTS THE L-M SAWS, WILL TAKE YOU TO THE NEXT LEVEL!

Leading the industry in bundle cross cut systems since 1957!

The New L-M “I-CUT” Bundle cross cut system!* 60’ long frame to precision cut your I-Joists* Precision accuracy of +- 1/32”* Shorter system are available to process all your cutting needs* Tremendous labor savings, Guaranteed!

New Design!New Technology!

L-M Equipment Co. LtdPhone: 604-431-8800 Toll Free: 1-800-455-8807 Web Site: www.LMSaws.com E-Mail: [email protected]

The Verticut P4 System now offers scan and cut technology, reducing operator error by using a bar code system!

Visit our web site www.LMSaws.com to see our complete product line and videos!

4 n November 2010 Visit us online at www.LBXonline.com!

Jem Machine, Inc."Your full source of Good Sawmill Equipment"

www.JemMachine.com

P.O. Box 108125 Airport RoadGrangeville, Idaho

83530

Call or Email:Mike Freeman

(503) [email protected]

Your Dollar Goes Further on Equipment with Us!

Office:

(800) 282-5597Fax:

(208) 983-0633

Grundler Hog

We have (14) 24 - 30 ready for shipment and some still standing.

Inventory Changes Daily

Call Mike for your equipment

needs.

Hog & Chippers

Grayco Metal Building

Ready to Install at your facility!75’ w x 270’ l x 24’ h

(2) 24-Unit Chip BinsTruck Bins (24 to 62 Unit)

Falcon/Kimwood HogChippers & Hogs (20hp to 500hp)

NICHOLSON 22” A5

In Stock35” & 44”

#2217 Armstrong

Bargain Basement Prices

$39,000

20 USNR DOUBLE LENGTH INFEED

BIG BLOW OUT ON FILING ROOM

EQUIPMENT

For Classifieds Call Your LBX REP at 1-800-315-9950 The Original Lumberman’s Exchange n 5

FOR CLASSIFIEDS Call 800.315.9950

See pictures, prices, and Location of all equipment at

www.LBXonline.comBANDMILLS & HEADSAWS

Woodland K-4 Sawmill with Edger - Woodland K-4 sawmill with attached edger. Please call for further information. - Item ID-11461 - Michelle 800-315-9950 x606

BLOWERS45” Bayley material blower 25HP - This 45” Bayley Mfg. blower has a 20-1/4” side inlet and a 12” top outlet. The fan diameter is 36” and the housing width is 15-1/2”. It has a 25 HP 220/440 drip proof motor with a 6-B drive. - Item ID-11783 - Daren 800-315-9950 x603Chicago Blower - Siemens 75-hp motor, Series 30GI blower. 1775 RPM. - Item ID-10820 - Michelle 800-315-9950 x606Koger Blower - 75-hp, 54” x16” fan, 18” inlet and 18” outlet - Item ID-10849 - Michelle 800-315-9950 x606Phelps blower with 20 HP motor - Phelps blower with 20 HP motor - Item ID-11742 - Michelle 800-315-9950 x606

CARRIAGES & DRIVESSalem 4-headblock Carriage - Left handed - Item ID-10846 - Michelle 800-315-9950 x606

CHIP SCREENSMorbark Chip Screener - 6x6 chip screener with 5-hp fine sawdust blower and 10-hp chip blower with pipes. All Hydraulic. Good condition. - Item ID-10766 - Michelle 800-315-9950 x606

CHIPPERSCM&E 36” chipper. Bottom discharge. - CM&E 36” chipper. Bottom discharge. 75 HP - Item ID-11751 - Michelle 800-315-9950 x6061994 WOODCHUCK - ASPLUNDH WOOD CHIPPER. HOURS: 2226, TIRES: 8.75-16.5LT, ID# 1W9B71210RS200896, WEIGHT IS 4000#, WD 17586, WOOD CHIPPER SELF FEEDER WITH FORWARD AND REVERSE CONTROL, 6 CYLINDER FOR GAS MOTOR, 16 INCH DRUM - Item ID-11807 - Daren 800-315-9950 x6032000 BANDIT 150XP - CUMMINS 3.9L DIESEL 12 IN. CAPACITY - Item ID-11790 - Michelle 800-315-9950 x60648” Precision Chip Pak - Reconditioned, new 100-hp motor, chip blower, cyclone, 5x5 screen with new screens 1-3/4” & 3/4”, 6 knife with 3 blocked off, 20-hp on blower, new bearings, new belts, new sheaves. Price includes loading on truck. - Item ID-11586 - Michelle 800-315-9950 x60666” Fulghum 8 Knife Chipper - with a 250 hp motor, $7500. - Item

** INFO LINK **Amark .................................................. 12

AWMV ................................................... 1

B & B Mfg. .......................................... 31

B. H. Payne .......................................... 15

Baker .................................................... 17

Bandit ................................................... 14

Bartlett Saw Service ............................. 27

Bay Equipment ..................................... 39

Ben Jones Equipment ..................... 21, 27

Buck Equipment (AIM) ...................... 16

Cemar ................................................... 18

Charleston Auction Group ................ 10

Concept Products ................................. 37

Cord Master ......................................... 22

Corley Mfg ........................................... 35

CRD Metalworks ................................. 23

Jackson Lumber Harvester ................... 34

Jem Machine .......................................... 4

Litco ..................................................... 13

LM Equipment, Canada ......................... 3

M&F Gauge ......................................... 25

Machinery Sales Co., Inc. ...................... 8

Menominee Saw ................................... 32

Metal Detectors, Inc. ............................ 13

Multitek ................................................ 33

Peterson Auction .................................. 11

Phase-A-Matic ..................................... 15

Piper’s Saw Shop ................................. 28

Resource Recovery .............................. 29

Rick’s Equipment ................................. 12

Robert’s Equipment (IME) .............. 9, 30

Rotochopper ......................................... 40

Row Electric ......................................... 19

Sawmill Exchange ............................... 29

Select Sawmill ..................................... 17

Sering Sawmill Machinery ............ 16, 20

Suffolk Machinery ................................. 2

Surplus Center ...................................... 38

Trelan ................................................... 26

Tremzac ................................................ 24

Truck & Trailer World............................ 7

US Blades............................................. 36

Weaver Electric .................................... 35

Woodmizer ....................................... 9, 23

Original

The Original Lumberman’s Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers the Lum-berman’s Exchange, its principles and associates are not held liable for errors or omissions. Reproduction in whole or part prohibited with-out writ-ten consent.

©2010 by Woods Publishing.

Your #1 Source for Forest Industry

Products!

The Lumberman’s Exchange is published monthly and is circu-lated internationally to sawmills, loggers, pallet makers, recyclers and industrial woodworking plants.

PUBLISHER Woods Publishing

ADVERTISING SALES Morris Woods (615) 349-1890 [email protected]

DESIGN DIRECTOR Heninger & Associates [email protected]

SALES MANAGER Michelle Cappel (800) 315-9950 x606

EQUIPMENT REPS Equipment Representative Daren Bodine (800) 315-9950 x603

Equipment Representative Tom Hirt (800) 315-9950 x604

MAILING ADDRESS P.O. Box 1916 Columbia, TN 38402-1916 (615) 349-1890 Phone (931) 233-0802 Fax

AD SUBMISSIONS May be sent to— [email protected]

POSTMASTER Send address changes to: Lumberman’s Exchange P.O. Box 1916 Columbia, TN 38402

** Auctions **CHARLESTON AUCTION — Page 10

www.CharlestonAuctions.com

ONLINE AUCTION Monday, December 6, 10:00 a.m. until

Thursday, December 9, 12 noon

ONLINE AUCTION Las Vegas, Nevada

Watch for Details to Come!

ONLINE AUCTION Houston, Texas

Watch for Details to Come!PETERSON AUCTION & REALTY — Page 11

SAWMILL & PALLET EQUIPMENT PLUS REAL ESTATE

Clymer, New York

If y

ou

ne

ed

to

Ch

an

ge

yo

ur

Ad

dre

ss o

r

Ad

d Y

ou

r N

am

e t

o o

ur

ma

ilin

g l

ist,

th

en

p

lea

se c

om

ple

te t

his

fo

rm a

nd

ma

il t

o:

Th

e Original

Lu

mb

erm

an

’s E

xch

an

ge

❑ P

leas

e Ad

d ❑

Ple

ase

Chan

ge ❑

Ple

ase

Rem

ove

Co

mp

an

y N

am

e*

*Com

pany

nam

e an

d ad

dres

s re

quire

d to

pro

cess

you

r cha

nge.

✁


I have a number of customers with equipment requests. I am in need of Firewood Processors, shaving mills, resaws, skidders, etc. Please contact me with this equipment or any of your available equipment. I am happy to assist you in selling what you have available or helping you find the

equipment you may need. I look forward to assisting you with your equipment needs.

Michelle CappelSales ManagerThe Original Lumberman’s Exchange

BANKS ARE LENDING & BUYERS ARE CALLING —

Michelle Cappel Phone: 800-315-9950 Ext. 606

Daren Bodine Phone: 800-315-9950 Ext. 603

Tom HirtPhone: 800-315-9950 Ext. 604

Call us today for all your used equipment needs!—Michelle

OCTOBER

See Photos online at

DEALS FROM LAST MONTH



2003 CAT 525B GRAPPLE SKIDDER

2008 WOODMIZER LT300 W/EDGER

Item ID: 12017Contact: MichellePh: 800-315-9950 x606

2006 TIMBERWOLF FIREWOOD PROCESSOR

ID-10478 - Michelle 800.315.9950 x606Can Car Chip & Saw grinder with air hold downs - Item ID-11738 - Michelle 800-315-9950 x606Fulghum 54” 8 knife chipper. - Fulghum 54” 8 knife chipper. Horizontal feed. Vertical discharge. No motor. No pulley on machine but a bushing is present.

- Item ID-11737 - Michelle 800-315-9950 x606“HMC 48” Chipper - HMC 48” side entry, top discharge chipper. It hs a model CM 48. Serial 23-111. It has a 75 HP 208-230/460 totally enclosed motor and is a very clean looking machine - Item ID-11750 - Michelle 800-315-9950 x606Hydraulic Feed Chipper - BANDIT 4B Cummins Power, Works Well - Item ID-11806 - Michelle 800-315-9950 x606Precision 48 Chipper & Shaker - Fines blower and dual trailer shoot. 125-hp electric motor and 36’ vibrating conveyor. - Item ID-11667 - Michelle 800-315-9950 x606Trelan DL18 Whole Tree Chipper - Powered by a 425-hp Cat diesel engine w/knuckleboom loader. Chip up to an 18” diameter log. Is pulled with a semi tractor. Cab has sound protection and heat. Rebuilt from the ground up, new wheel bearings, new face plate for chipper wheel, changed Detroit engine to Cat engine went from 300-hp to 425-hp, added new belts and heavier bearings. Only run about 6 months after rebuild. Can be used to make fuel-wood. Is ready to go, needs no work. Was manufactured in the mid 80’s. - Item ID-11292 - Michelle 800-315-9950 x606

CHOP SAWSBlock saw - This well-guarded block saw has a 4x6 capacity. Blocks drop into a small elevator. It has a motor on the elevator and one on the saw. Motor controls are present. Air is hooked up to actuate the saw stroke. Feed is manual. Block length is adjustable - Item ID-11838 - Daren 800-315-9950 x603

COMPLETE SAWMILLSHMC MM10 Right hand 4 block modular mill-- - 2-saw vertical edger and 150 HP motor and starter. Carriage is all air powered. Needs a log turner, the carriage is 17’ 8” total length the 1 head is 2’6” from the end of the carriage to the center of the hea”2005 Timberharvester Sawmill - Purchased new in December 2005, has 1550 hours, powered by a 47-hp Lombardini diesel, log debarker, computer setworks, can cut up to a 36” x21’ log. Stored and run inside. - Item ID-11584 - Michelle 800-315-9950 x6062008 Mighty Mite Mark IVB Portable Sawmill - Bandsaw Sawmill. Perkins 37hp Diesel Motor. Hour Meter Reads: 49.5. S/N: B4B0637 with 2007 Mighty Mite Mark IVB 40’ Trailer, VIN: 1M9SB40237P538637 - Item ID-11996 - Michelle 800-315-9950 x606


Firewood ProcessorsI lackstoneeaver

P: (508) 478-5902 123 Uxbridge RoadF: (508) 321-9876 Mendon, MA 01756

I lackstoneeaver

Operator comfort in enclosed cab•

Dual joystick controls ease hand •

fatigueComfortable, adjustable seat•

Joystick controls•

Engine controls inside cab•

The Blackstone Beaver Components

The Blackstone Beaver Firewood Processor is built in the USA with industry standard components. Hydraulic systems built with high quality Parker hoses and hose ends.

SizeMaximum log length is 25’ with a 24’ diameter. Cut length is adjustable up to 24” long. Splitting head can be adjusted by up to 10” for consistent splits on various log diameters.

CustomizationBlackstone Beavers are customizable by the manufacturer. Integrate your ideas into a production machine built to match your requirements! Don’t need a mobile unit, specify a skid mount.

SpeedThe processor comes standard with a 3-stage hydraulic pump. All strokes are performed in high speed by default, but if greater splitting force is needed, pressure will immediately be increased. When load is decreased, the high speed stroke will renew.

Schurman Late 4” x 36” ShiftingTMT Chipping EdgerSchurman 6TA48 CombinationUkiah 6” x 48” Gang EdgerSchurman 12” Double Arbor Gang

FILING ROOM EQUIPMENTVollmer Cana E (8)Wright Mod. 1801 (3) Weinig R 934 Profile GrinderErma 71” Mag Bed GrinderNewman G-200 GrindersHanchett Knife Grinders (10)Wright W-1600 Auto TipperWright W-150 MSM Top & FaceArmstrong No. 90 EqualizerArmstrong Dual Side GrinderArmstrong Side ProNewman G-20 Rotary Armstrong No. 4 RH B.S. GrinderArmstrong No. 25 CircleHanchett DN-40 Knife GrinderArmstrong No. 4 LH B.S. GrinderArmstrong No. 4 B.S. Stretcher Roll

HOGS & PULVERIZERSRawlings 48 x 60 Rotary HogRawlings 36 x 60 Rotary HogJeffrey 36 x 60 ShredderJacobson Horizontal HogZeno Low-Noise GrinderWest Salem Big Brute GrinderJacobson Hammer MillW. Salem 52” Horizontal GrinderJeffrey 56 WB Hammer HogLamb HX 750 Hammer Hog Kimwood Rotary HogJeffrey 76WBH Horiz. HogGruendler 50XE Hammer Hog

MISCELLANEOUSMereen Johnson 424DC RipsawIndustrial 3496 Finger JointerIndustrial FJS-25 Finger J. SystemHurricane 28” Chop SawFruilmac End Matcher(4) Peerless 24-Unit Bins

(866) 241-2977

OVER 13 ACRES OF GREAT BUYS ON USED EQUIPMENT!For complete equipment list, visit our website:www.machinerysales.com

OR CALL AND ASK FOR DEPT. LX

Woods Planers 412M, 414M, 407M, 409M. 415M Woods Moulder 132M

Yates Planers A-20, A-62, A-66 Stetson-Ross Planers 6-12-A1, 6-12-C1, 6-10-A1, 6-14-D1

Mattison Moulders 276, 226, 228SAVE BIG ON MOTORS AND MAJOR PARTS!

WE ARE PARTING OUT

WORLD’S LARGEST INVENTORYNew & Used Sawmill & Planing Mill Equipment

9802 North Vancouver Way

Portland, Oregon 97217

WE ARE OVERSTOCKED! PRICES REDUCED!TAKE ADVANTAGE OF THIS CHANCE TO SAVE BIG!

BANDMILLS & HEADRIGSSalem 6’ Air Strain BandmillKockums 6’ QuadMaxi Mill with 6’ QuadSalem 7’ RH BandmillSalem 5’ Air Strain BandmillL&B 6’ Air Strain TwinsMcDonough 62” Twin Air Strain

CARRIAGES & DRIVESSalem Linear 36" 2-BlockTyrone 240 Hydraulic Drive Corley 40” Hydraulic 3-BlockSalem 24” 3-Block Linear CarriageUSNR 2000, 42" Stud CarriageSalem 60” 4-Block CarriageSalem 42” 4-Block Carriage

CHIPPERS & SCREENSBM&M 5’X14’ ScreenRotex 6’X16’ ScreenPrecision 58” Horizontal FeedWest Salem 58" Horizontal FeedPrecision 8X8 ScreenKockums 8X8 ScreenPrecision 7X7 Screen Precision 66" Horizontal F.Precision 118” HFBD ChipperPrecision 96” Whole LogPrecision 48” Horizontal F.B.C. 6140 Slant DiscCM&E 36” Rechipper

DEBARKERSNicholson 35" A-2 DebarkerNicholson 22” A-5 DebarkerNicholson 44” A-2 Debarker

EDGERS & GANGSPendu Double Arbor Gang

Peerless Trailer DumperSamuels Plastic Strapper (1) 60-Unit Peerless BinL&M Log Cut-Off SawsTimesaver Sanders (6)Lumber Stackers (3)Irvington 20’ Trimmer, 1’ SawsMereen-Johnson 48” Ripsaw Sullair V-200TS Compressor5-Arm Hyd. Tilt HoistSticker Recovery SystemIrvington Planer Trimmers

PLANERS & MOULDERSStetson-Ross Timber SizerWeinig Powermat 2000Mattison 226 12” MoulderMattison 228 16” MoulderDiehl 6-head TF MoulderBuss 55 Double SurfacerBuss 88 Double SurfacerWadkin 6-Head MoulderYates A-20 10-KnifeWeinig U22A, 6-headWadkin 7-Head MoulderNewman M-990H 20-KnifeNewman 382 Double SurfacerS-R 6-14-D1 15”, 16-KnifeIida High-Speed MoulderNewman M712 12-KnifeS-R 6-10-A1 10-KnifeYates A-20-12, 15", 10-KnifeCoastal 24” 20-knife PlanerS-R 6-14-D1 24” 16-KnifeS-R Chip BlankersWeiniig P22N 5-Head

RESAWSMcDonough 54” Twin Horizontal 36” Tri-State Tilting ResawTurner 48” Rollfeed ResawTurner 52” Rollfeed ResawSalem 6’ Horiz. Air StrainKockums 6’ Horiz. Twin Air StrainMcDonough 62” Linebar Resaw


800.553.0182 SawLumber.com© Copyright 2010, Wood-Mizer Products, Inc.

Joystick ControlsThis high production mill features advanced hydraulics, turbo-charged power, and two industrial grade joysticks that control all cutting functions.

LT70DCS

LT35HDHydraulics Under $20,000Full hydraulic log handling easily loads, levels, clamps, and turns log.

LT15GOPortable & Affordable Trailer package is road-ready and mill is operated right on the trailer.

Wood-Mizer sawyers now have even more choices, more features, and more functions all from one company. DREAM TO THE MAX. Call or go online for video and details. Introductory offers end December 31, 2010.

‘04 Barko 575 Stationary Diesel12,000 hrs., God for sorting deck.Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

56” Circular Sawmill - Runs 8’ to 28’ long saws up to 36” wide. Is PTO powered, currently running off 80-hp tractor. - Item ID-10802 - Michelle 800-315-9950 x606Complete Circle Mill/top saw/resaw/edger/all transfers - Complete sawmill helle carriage with top-saw; infeed deck; edger; McDonough resaw; Cat Gen-set; all transfer equipment. Circle saws and related equipment. All electrical switches included in sale. Buyer is responsible for removal. - Item ID-11656 - Daren 800-315-9950 x603Complete Plywood Mill - sold - Item ID-10797 - Michelle 800-315-9950 x606Complete Select Sawmill - 6” double cut bandmill. Can produce 15,000 to 20,000 board feet per day. Mill has 1500 hours. Comes with 48 extra blades worth $10,000. Also includes a debarker with 840 hours. Both purchased new by current owner. Price new without the extra blades is $160,000. - Item ID-10782 - Michelle 800-315-9950 x606Comptete Operating Sawmill - 1-HMC 30 ft. 4-Strand Log Deck with stop and loader. 2-HMC

V2110 Slant Track Debarker - 24 ft. capacity Cornell Bark Conveyor - 40 ft.Debarker control cab 3-40 ft Hour Glass Rollcase. 4-30 ft. Heavy Duty Log Deck with stop and loader.HMC log turner (chain) up and down. 5-Lane Tech Heavy Duty 536 4-Head Block Carriage. 5 axles with 12” wheels.3 Cant turners. 6-Heavy Duty Modular

Track System capable of sawing 24 ft. 7-Head Rig-48” main saw with 150 Hp-36” top saw with 75 HP-Off bearer belt-Over-sized booth with o heat and air-Silver Tech set works.8. 75 HP Hydro Static feed for carriage with cooler. 9. Mellot 24 ft retractable Roll Case with 8” spiral rolls and

2 pop up transfer rolls. 10. Mellot 24 ft Roll Case with 8” smooth rolls. 11. Mellot 8 ft. 4-Strand Transfer Deck to Edger with stop. 12. Lane Tech combination Edger Resaw with 75 HP motor.2 - 18” blades, center split with Silver Tech setworks. Infeed table- Cant transfer chains to resaw. 2 Carter


!"#$%&'()&*#(+(,-"./*01

2--&3(+(45&/65&%

70/"38&*5.(9:"*;#%08

<=>?,7@A(B<>)7?@C

?@!7@9(?@!D(B<>)7?@!"#$%&'()%*+,(-.*%#"&./%&0.1'(2343563*(7+,(.+(89:99.5(+%(;,<*$0.1'(2343563*(=+,(.+(8>:99?5

?@!7@9(?@!D(B<>)7?@@.$(A3B.$'()3C.0.23+."#$(-%5"&B(D%%&E

4<A9(EF2BD(?@C7)9(B<>)7?@F%<$+%&'(;3G.$23+."#$(-%5"&B(D%%&E

>5..(GHIIJ(KLIFHMEN(-&(O*3*8(<3(?0.*0%(58

666P>Q5&.%38-0B"R8*-03PR-#

2006 Timber Wolf Firewood Processorw/26’ ConveyorItem ID: 12020Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com

‘06 Amerimulch Middie-Mite Coloring SystemItem ID: 12005Contact: Michelle800.315.9950 Ext. 606

www.LBXonline.com

laser site lines. 13. Lane Tech Resaw 42” circle saw. Line Bar with Manual set work from 0.5” to 8”. 2 side arm rolls plus top back rolls - all powered. 14. Mellot 20 ft. Self-tailing Out Feed Belt. 15. Mellot 20 ft. Split Out Feed with 8” rolls and pop up stop. Merry go around. 16. Mellot 4-Strand with square lugs. 17. Mellot 22 ft. Belt Conveyor. 18. Mellot 4-Strand 14ft (roof top chain) Deck with Hyd. stops. 19. Cornell 2-24” saws - auto Set works from 4ft. to 20

ft. in 1 ft. increments. 20. Mellot 40 ft. 4-Strand Lumber Deck. 21. 2-Strand Lumber Deck 24 ft. 22. 100 gal Hyd Pump Tank with solenoids for deck functions. 23. Dayton 10HP Air Compressor, 3 Phase. 24. Emglo 5 HP 230 Volt, 1 Phase. 25. Cat Generator - 3412 Engine, 550 KW - Serial # 81Z23731. 26. 48” 3-Knife Morbark Chippac with 15 HP Trailer Loading Blower. 27. Mellot 24 ft.

Vibrating Conveyor. 28. Webster 50 ft. 8” sides Vibrating Conveyor with Saw Dust Section. 29. Rens Metal Detector in Webster Vibrating Conveyor. 30. Saw Laser Lite for Head. 31. Misc Blades and Parts for various machines. 32. Electrical panels. 33. Saw Motors. More pictures available upon request. Thanks for looking. Out put 35,000 bf in one 8 hour shift. - Item ID-11774 - Daren 800-315-9950 x603Jackson Harvester Sawmill - 3 headblock carriage, 2 saw vertical edger, Mudata setworks, log turner, sawcab, almost new feedworks!!!! 2 strand live deck, Husk, newer sawcab outfeed belt. Can be bought as package or individual pieces! Can be seen running. - Item ID-11313 - Daren 800-315-9950 x603Meadows #2 Sawmill - Meadows #2 carriage - 15’ OAL with 4 headblocks - 3 hydraulic dogs - 5 axles, hydraulic setworks with pantograph arm assembly to carry hydraulic & electric lines from carriage to husk - clock face lumber dial - controls for setworks & dogs. Meadows #2 track frame, with idler assembly. Reckart hydraulic feed package with 40-hp electric motor. Mellott log turner.

35’ log deck with stop & load. 130KW generator. - Item ID-11086 - Michelle 800-315-9950 x606Sawmill With Chipper - Carthage carriage, helle sawmill and chipper - Item ID-11992 - Michelle 800-315-9950 x606

CONVEYORSHurst Conveyor - Heavy duty material handling conveyor. Manufactured in 1994. Catwalk. Cleated 4’ wide belt. 100’ overall length. - Item ID-10821 - Michelle 800-315-9950 x606Webster Vibrating Conveyor - 90’ Webster Virbrating conveyor one drive section one fiberglass section 12” botom - Item ID-11760 - Michelle 800-315-9950 x606

DEBARKERSMellott Debarker with 648 Rosser Head - Late 90’s year model, either 1997 or 1998. 20’ 3 strand log deck stop and load with Mellot 40’ log trough. Dual kickers and Cornell barn sweep. - Item ID-11668 - Michelle 800-315-9950 x606Precision 636 Debarker - Flat track debarker with Mellott 20’ deck. - Item ID-11683 - Michelle 800-315-9950 x606

EDGERS & GANGS6” Edger - Edminston hydraulic edger. Early 2000 year model with electric motor. Has a 40-hp, 60 hz.


ITEMS SELLING1997 Morbark Wood Hog • model 5237 w/5000 hours, sells with reserve1982 Viking Duo-Matic Pallet • nailer/stacker model 508-002 includes 2 nailers, 2 pumps, stacker, roll out, and interme-diate conveyorCleereman model 36 rebuilt • saw carriage with 51’ trackSalem 66” band mill• Cleereman model 50 power • pack with drive54” McDonough band saw, • extra frame for parts

PlusReal Estate - 13 Acres, 60’ x 172’ and 80’ x 120’ steel buildings, all in very good condition. Full info on web page.

Log Merchandiser with 75 hp • electric motorKeystone double bay pre-cut • band saw with 36” wheelsKeystone cut-off saw w/12’ • in feed rollers, 12”x 26’ scrap conveyorLumber Mate Band Saw • Modify (on wheels) with power feed 23 hp gas motor, extra 1 ½” blades and blade sharpenerLumber Mate Edger, on • wheels with 13 hp gas motorFrick Edger• Mechanical Automatic Slab •

Saw with gas motor and car-bide blades, 40hp Reliance electric motor, Wisconsin gas motor5’ pallet forks • 50 wood ISP certified ship-• ping crates8’ x 8’ insulated office booth• Saw booth• Screw compressor• (2) 250 gallon fuel tanks• 500 gal air tank• 42” Wellington dust blower• Pallet jack •

AUCTION LOCATIONAuction held at 1305 Clymer-Sherman Road (County Road 15)

PHOTOS See at www.petersonauction.com

TERMSCash or certified funds• Items must be removed within • 10 days

MIKE PETERSON—

JAMESTOWN, NY 14701COMPLETE

AUCTION SERVICES

‘08 Dynamic 570 Chipper1900 hrs., Ready to produce.Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com

‘08 Dynamic 585 Whole Tree Chipper2200 hrs., Factory Rebuild

Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

- Item ID-10864 - Michelle 800-315-9950 x606Meadows 7” X 48” Combination edger. Serial # T7-1738-99. Was once used with a shifting saw. Some, but not all of the parts for this are present. There are three 23” split strob saws. There is an integrel hydraulic system on this machine. 8’ outfeed. 10’ infeed with hydraulic roller holdover and two air popup pushover chains. Remote operator station. Hydraulic press roll lifter. Main shaft is 2-15/16”. There is no main motor present. There is a mast for shifting lasers but the system is not complete. Footprint of unit: 7’ X 22’ - Item ID-11733 - Michelle 800-315-9950 x606Meadows Deluxe Edger - 4” x36”. Very little use, in very good condition. Has a pulley system to run it. 3 interchangeable blades. - Item ID-10900 - Michelle 800-315-9950 x606Miner Edger - 40 HP Electric motor, 4” x 32” capacity, up to (4) blades, 7’ Infeed, 8’ outfeed - Item ID-10789 - Michelle 800.315.9950 x606

Ogam chain drive open arm gangsaw. - 2 Main drive motors included. 10 HP and 30 HP. - Item ID-11744 - Michelle 800-315-9950 x606Salem 3-Saw Edger - 60-hp motor, 4” X 48” capacity, 9’ infeed table, 17’ long picker outfeed table, hydraulic blade shift. 1990 model - Item ID-10852 - Michelle 800-315-9950 x606Schurman 4” Top arbor edger - “Super Heavy Duty” would be an understated description of this machine. It features 50 HP on the arbor and a separate motor for the feed. There are 3 air shifting carbide saws in the 23” wide feed throat. 6 bottom and two top feed rolls. All powered. The top rolls have air lifts. All feed rolls as well as the saw portion of the arbor are chrome plated. A very well engineered, heavily built machine. - Item ID-11763 - Daren 800-315-9950 x603Timberking Talon 900 Edger - Powered by 220 volt, 3 phase electric, 15-hp motor. Has a 21” opening. Been used and stored inside a warehouse and never

exposed to the elements. - Item ID-11560 - Michelle 800-315-9950 x606Vertical edger for RH mill - 50 HP, 20” F saws with carbide bits, solenoid valves, splined arbor. Good looking edger. - Item ID-11781 - Daren 800-315-9950 x603

FIREWOOD PROCESSORS1985 Multitek 2040XP - Firewood

processor located in Colorado. Powered by a Detroit diesel engine. Runs great. Conveyor needs new tires. - Item ID-11982 - Michelle 800-315-9950 x6061988 MULTITEK 2040XP2 Firewood Processor - 1988 MULTITEK 2040XP2 Firewood Processor, John Deere 80 HP diesel engine, many new hydraulic parts, 20” diameter, 40’ long capacity, 865


Let us reprocess them $25 per 100

Now have Factory Seconds $25 per 100 sticks

Save

Your

Stubs &

Pieces!➨

Our newest color—Light Blue

FACTORY DIRECTHOOD LOADERS

RICK’S EQUIPMENT

CALL US TODAY!

(906) [email protected]

Falcon Rotary Hog

(800) 319-8871

Exceptional Prices Excellent Service

hours - Item ID-12015 - Michelle 800-315-9950 x6062005 2040xp2 + 30’ Conveyor - 2005 2040xp2 firewood processor, 80 hp John Deere Diesel, 30’ Conveyor, 2-strand roller chain, hydraulic lift, 40’ long, 20” log capacity, 8-way wedge, 3,300 hours 5th strand live deck arm for processing blocks as short as 24” (normally a $2,000 option), Very Well Maintained Heated Operator Cabin, Pilot Electric/Hydraulic

Joysticks Safety Seat, Clean Out Pan Option (normally $1,000 option - Item ID-11871 - Daren 800-315-9950 x6032005 model 50 SCP processor. Includes Auto log stop, 3 strand live deck, 4 1/2” cylinder, cab with heat & A/C, 750 hrs, 68 HP Kubota

diesel - Item ID-11619 - Daren 800-315-9950 x6032006 MULTITEK 2020CSC, One owner, ‘06 Multitek 2020CSC firewood processor with a 2.4 L 66hp John Deere Engine, with 2000 hrs, unit is an all in one including loading deck and conveyor, heated cab, and lights, 3/4” pinch saw chain, conveyor extension for loading semi-trailers. - Item ID-11900 - Daren 800-315-9950 x6032007Hakki Pete 1x37 EZ, 6 hours, Auto Feed. 4 Way Splitter. Loading Conveyor - Item ID-11865 - Daren 800-315-9950 x6032008 Wood Beaver Hakki 1x37 Firewood Processor - 2008 year model, powered by a 24-hp Honda gas engine. Includes a log deck. Less than 100 hours. - Item ID-11659 - Michelle 800-315-9950 x606Empire Firewood Processor (now is Cord King) - 2002 Empire firewood processor with low hours. 42” circle saw, 3 strand live deck that accepts log that are 25’ long and 22” in diameter. Powered by an 80-hp Cummins diesel. Less than 400 hours. 30’ conveyor is included. Has tandem axle, pintle hitch and produces 4 cords per hour. Ready to tow home and get to work. - Item ID-11980 - Michelle 800-315-9950 x606

HAKKI PETE 1X37 Firewood Processor - Manual Set-Up, 4 & 6 Way Wedge, 3 Extra Bars, 6 Extra Chains, Converted to Rim Sprocket, Hydraulic Log Lift, Serial #4702-5 includes a John Deere 850 Power Unit - Item ID-11694 - Daren 800-315-9950 x603Shop-Built Firewood Processor - Shop built firewood processor takes logs 20” x 24’. Has 6-way wedge. 20-hp motor, husqvarna 395 chain saw with a 28” bar. with conveyor it can process 2 to 3 cords per hour - Item ID-11680 - Daren 800-315-9950 x603Simplex Chomper 14 - Chomper firewood processor , model simplex 14 , will handle logs up to 14 “” in diameter unlimited length. Can do one cord in approx 1 1/2 hours with one man , cut split and ready to go . Uses a hydraulic shear instead of a saw so no sharpening , can split two or four ways. In Maine - Item ID-11707 - Michelle 800-315-9950 x606TIMBERWOLF Pro-HD XL Inline Firewood Processor - TIMBERWOLF Pro-HD XL Inline Firewood Processor, 80hp John Deere, Auto cycle, 8 way wedge, 16’ live deck, Cuts & splits up to 3 cords/hour, This machine was a demo unit and has very low hours. Also includes a partial


“Providing a full range of industrial metal detectors since 1965.”

MDI PROBE 2100PORTABLE INDUSTRIAL METAL DETECTORSIMPLE TO OPERATE –

just turn on and go!MDI’S SUPERIOR DIGITAL TECHNOLOGY will detect an 8d nail buried 15" into a log!

• Pre-set for maximum sensitivity with adjustable sensitivity control

• Microprocessor controlled; eliminates mineral interference

from logs or round for maximum detection depths

• Bright L.E.D. display indicates signal strength and battery level

• Touchpad control allows precision pinpointing of tramp metal

P.O. BOX 26440 • EUGENE, OREGON 97402PHONE: 541-345-7454 • FAX: 541-345-7971

www.metaldetectorsinc.com

‘06 Amerimulch Middie-Mite Coloring SystemItem ID: 12005Contact: Michelle800.315.9950 Ext. 606

www.LBXonline.com

50” Capacity Wood Hogw/ConveyorItem ID: 12018Contact: Michelle800.315.9950 Ext. 606www.LBXonline.com

‘74 BARKO 160 Knuckleboom Loader Log Loaders/StackersItem ID: 11979Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

factory warranty - Item ID-12013 - Michelle 800-315-9950 x606

FORKLIFTS1995 Nissan Forklift - 15,500lb Capacity, Model: DF05N70V, Diesel, Pneumatic, Side Shift, 2-Stage Mast, 177 Max Mast Height, Hour Meter Reads: 8,224, S/N: 001800 - Item ID-11892 - Michelle 800-315-9950 x6062000 Hyster H155XL Forklift - 15,000 lb Capacity, LP Gas, Rough Terrain, Pneumatic, Tilt, Side Shift, 2-Stage Mast, 173.2 Max Height, Hour Meter Reads: 3,938, S/N: F006D05789X - Item ID-11893 - Michelle 800-315-9950 x6064500 Masse Ferguson Forklift - Powered by a 3-cylinder Perkins diesel engine (completely rebuilt). Almost new tires, 4’ forks, lift is 10’ high and has a 2 stage mast. Is hydro-static. - Item ID-10768 - Michelle 800-315-9950 x606Case 586C Forklift - Forklift with good rubber, good brakes and runs good. Has side shift. 1982 year model. Case 4-cylinder. ITEM IS SOLD!!!! - Item ID-11457 - Michelle 800-315-9950 x606Hyster Forklift - 2WD, LPG, Pneumatic Tires, Est 8000LB Capacity, Sideshift, ROP, Hours Shown As 3451. - Item ID-12002 - Michelle 800-315-9950 x606

GENERATORS350 KVA Cummins - Genset with 9000 hours. - Item ID-11994 - Michelle 800-315-9950 x60675KW Diesel Turbo Generator - 770 hrs on it. w/ a hercules Deisel Engine & right now it’s wired for 3 phase. No fuel tank underneath it, it was a platform. Very good Condition! - Item ID-10491 - Michelle 800.315.9950 x606

KNIFE GRINDERSHanchett Band Sharpener - Sharpener with stretcher and shaver - Item ID-11601 - Michelle 800-315-9950 x606“Hanchett Circular saw grinder - Hanchett Circular saw grinder This circular saw grinder appears to be capable of grinding up to a 36” diameter saw. Plate info: Size 724. Serial # 8109 - Item ID-11746 - Michelle 800-315-9950 x606Schneider Pattern Knife Grinder - Schneider Pattern Knife Grinder - Item ID-11743 - Michelle 800-315-9950 x606

LOG BOOM CRANES1984 BARKO 80BC - 1984 BARKO 80BC, logloader,includes the International truck, sn#15298 - Item ID-11428 - Daren 800-315-9950 x603

LOGGING EQUIPMENT1969 Fiat Allis articulating loader with Log Forks Needs fuel tank cleaned out but works otherwise -

Item ID-11437 - Daren 800-315-9950 x6031974 BARKO 160 Knuckleboom Loader Log Loaders/Stackers - 1974 BARKO 160 Knuckleboom Loader Log Loaders/Stackers, Detroit engine, mounted on IH truck, with Barko 42 grapple - Item ID-11979 - Daren 800-315-9950 x6031978 CAT 518 Grapple Skidder - 23.1x26 Tires, tires 40%, Gearmatic Winch & Esco Grapple,

SAVE BIG ON USED & REFURBISHED EQUIPMENT

‘08 Bandit Model 3590Cummins 700-HP. HP600 Twin Disc Clutch. Reversing Fan. Babitted Knives.

$340,000.00

GREAT BUY! ‘06 Bandit Model 4090CAT 1000-HP. Prentice Loader. Deluxe Operator’s Cab.

Refurbished. New Paint Job.

$440,000.00

‘07 Bandit Model 2090John Deere 325-HP Hydraulic SwivelAuto Feed.

$89,995.00

Email: [email protected]

Online: http://www.banditchippers.com

1-800-952-0178

OUR BIOMASS CHIPPERS TAKE YOU FROM FOREST TO FUEL.

‘03 Beast Model 3680CAT 565-HP. Radio Remote. Magnetic head pulley.

$240,000.00

For fuel wood production, nothing is built stronger and lasts longer than a Bandit whole tree chipper. Our unique machines quickly and effi ciently convert whole trees into dimensional chips. Now featuring eight high-powered machines to maximize productivity.

‘06 Beast Model 3680CAT 700-HP. Reversing Fan. Fifth Wheel Hitch.

$295,000.00

LumbermansExchange-1110.indd 1 10/21/10 10:05:28 AM



$340,000.00



$440,000.00


$89,995.00



1-800-952-0178



$240,000.00



$295,000.00

LumbermansExchange-1110.indd 110/21/10 10:05:28 AM



$340,000.00



$440,000.00


$89,995.00



1-800-952-0178



$240,000.00



$295,000.00




$340,000.00



$440,000.00


$89,995.00



1-800-952-0178



$240,000.00



$295,000.00




$340,000.00



$440,000.00


$89,995.00



1-800-952-0178



$240,000.00



$295,000.00




$340,000.00



$440,000.00


$89,995.00



1-800-952-0178



$240,000.00



$295,000.00




$340,000.00



$440,000.00


$89,995.00



1-800-952-0178



$240,000.00



$295,000.00




$340,000.00



$440,000.00


$89,995.00



1-800-952-0178



$240,000.00



$295,000.00




$340,000.00



$440,000.00


$89,995.00



1-800-952-0178



$240,000.00



$295,000.00



When You Buy Your Circular Saws From B.H. Payne

You’ve Bought the best... We Guarantee It!

Make Sure To Ask For Our Free, Complete Saw CatalogWe Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth

Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also

Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels,

Knife Grinding Wheels, Saw Gumming Wheels & Knives.

Traditional Quality CombinedWith Todays Technology

Call 800 752-0627Quality Brand

Reg. U.S. Pat Off

Circular SawsSaw Bits and Shanks

Circular KnivesCarbide Tipped Saws

Carbide Strobe ® SawsB.H. Payne & Company

Saw Manufacturers

Traditional Quality CombinedWith Todays Technology

Call 800 752-0627

Here’s What You Get With Every B.H. Payne Saw• Saws manufactured from only the Highest Quality Nickel Alloy Steel.• Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine.• We Tension Your Saw to Your RPM Speed BEFORE Leaving Our Factory.• Your Satisfaction - Completely Guaranteed.

B.H. Payne & Company, Inc.P.O. Box 90608East Point, GA 30364404 761-8711Fax 404 761-5398

“Since 1890”

E-mail: [email protected] Web Site: www.paynesaws.com

‘78 Timberjack 225Item ID: 12031Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

1988 Mack RW713 Day Cab Log TruckItem ID: 12000Contact: Michelle800.315.9950 Ext. 606

www.LBXonline.comCenter Pins are tight - Item ID-11800 - Daren 800-315-9950 x6031982 540B Grapple Skidder, New engine and Transmission 2000 hrs on both, bottom center pin is new, top has a little wear, tires are at 40% power shift Transmission. Pictures are coming soon - Item ID-11569 - Daren 800-315-9950 x6031984 DEERE 540B cable skidder, New 23x126 tires on rear. 8000 hrs - Item ID-11875 - Daren 800-315-9950 x6031984 DEERE 540B, cable skidder, 20,000# winch capacity, 7 ft blade, articulating, 4 cyl JD turbo dsl @ 90 hp, powershift 6 fwd/3 rev, 7 ft blade, 18,700# machine, 20,900# capacity front tires 50% reares 30% - Item ID-11566 - Daren 800-315-9950 x6031985 DEERE 540B Grapple skidder, Swinging Grapple, winch, front tires are 70% and rears are 85% or better, new batteries and a new seat. - Item ID-12010 - Daren 800-315-9950 x6031985 Treefarmer C6E Grapple- Grapple, winch, complete overhaul 500 hours ago, 453 Detroit, powershift transmission, 28x26 tires are 50%, rebuilt grapple and arm cylinders, all worn hoses replaced. Winch needs shaft. - Item ID-11296 - Daren 800-315-9950 x6031987 FORD L9000, TWO BUNK OR 4 SETS OF BOSTERS, 366,000 mile, vin#A55219 tri axle, Cat 3406 diesel engine, 8LL transmission and 370 rears, prentice 120c - Item ID-11844 - Daren 800-315-9950 x6031988 DEERE 648D - Front tire are 70% rear are 50%, Machine runs good - Item ID-11432 - Daren 800-315-9950 x6031988 FORD L9000, 425 hp Caterpillar engine, 702,000 miles, 10 Spd transmission, air ride suspension, with a Prentice knuckleboom loader - Item ID-11846 - Daren 800-315-9950 x603

“1988 GMC Topkick Log Truck - With Prentice loader. 3208 Cat diesel, air brakes and runs good. - Item ID-10920 - Michelle 800-315-9950 x6061989 Timberjack 480 grapple skidder, 4749 hours, Cummins engine, no winch $14,000 OBO - Item ID-11852 - Michelle 800-315-9950 x6061990 Morbark 16 whole tree chipper - 1990 Morbark 16 ChipHarvestor new Cat engine whole tree chipper with 16” diameter capcity, cab and grapple loader, grapple loader is in good condition, 1000 hours on new Cat engine, only 3500 original hours, new clutch, new belt, new bearings, needs some paint, some dents in the cage, but overall mechanically sound whole tree chipper. - Item ID-11863 - Daren 800-315-9950 x6031991 Cat 518 grapple skidder All belly pans and sheet metal were removed so the machine could be steam cleaned. All the cylinders have been packed. The radiator is rebuilt with new tanks. New starter has been installed. A couple of new guages were installed. New hinge pins and steering pins installed. All filters and fluids have been changed. Many hoses have been replaced. Winch has been rebuilt. Brakes work good. New exhaust muffler and pipe installed. Tires have about 35% tread. Seat is in good condition. New paint and decals. - Item ID-11832 - Michelle 800-315-9950 x6061991 Haybuster IG-8 tub grinder, 1100 hrs, 2” screens, john deere diesel engine, swing hammers have been replaced, discharge belt has been recently replaced, only used to regrind bark - Item ID-11864 - Daren 800-315-9950 x6031991 Hydro Ax 221 - 1991 Hydro

Ax 221 hour meter broken good tread good running condition includes bush hog attachment - Item ID-11769 - Michelle 800-315-9950 x6061991 Hydro Ax 221 John Deere, 4-cylinder Koehring 18” high speed disc saw 28L x 26 tires enclosed cab with heat and air - Item ID-11770 - Michelle 800-315-9950 x6061992 Prentice 180D Log Loader with Cummins engine mounted on Pitts Trailer. Good condition with 7,700 hours - Item ID-11434 - Daren 800-315-9950 x603

1993 FREIGHTLINER FLD12064ST, Detroit 60 series engine, 425 hp, 18spd transmission, 4.10 gear ratio, Barko 80 LOADER, Reman TRANS Dec. 07, Both rear end recently rebuilt, full synthetic fluids in trans & rear ends. Full double frame. Full Locking Rears. Well Maintained Truck Bed legnth 19’6”, air ride suspension Front tires 60%, new set of drives - Item ID-11641 - Daren 800-315-9950 x6031993 Timbco 425 - With dangle head; new under-carriage and runs great. Has all books. - Item ID-11582 - Michelle 800-315-9950


SERING SAWMILL MACHINERY CO., INC.Call Marty Sering Today!

CARRIAGE DRIVE PUMPS

& MOTORSHEAVY DUTY, CAST IRON

(360) 687-2667

x6061993 Timberjack 380 C Skidder - 23.1x26 rubber, Esco grapple, winch, enclosed cab, Cummins engine, rebuilt motor and transmission. - Item ID-11534 - Daren 800-315-9950 x6031994 Cat 518C Skidder - The engine was rebuilt 3 months ago. An extra Lufkin winch is included. Has 3400 size tires on it. - Item ID-11856 - Michelle 800-315-9950 x6061994 Duratech HD8 8’ tub grinder, has only 204 hours on it! John Deere turbo diesel with 131 horsepower, new under belt, new roller bearing, new hydraulic pump, and new exhaust. swinging hammers on mill, 2 sets of screens included (3” and 1 7/8”), 10’ discharge conveyor, good tires, 25/16” ball hitch on trailer. original owner’s manual included, ready to go to work on your yard waste or pallets! Duratech CO. also owens Hay buster. The Haybuster nane tells you that it is more for farming and the Duratech name tells you that it is for heavy duty work such as gring heavy material, but they bouth fall under the DURATECH name as the company is DURTACH INC. - Item ID-11861 - Daren 800-315-9950 x6031994 Haybuster HD-10 Tub Grinder - 1994 Haybuster HD-10 Tub Grinder, Powered by a John Deere Diesel Engine, Hydraulic Driven Tub and Conveyors, 10’ tub size, Hour Meter Reads: 920 Hrs, S/N: 18-1-49-0312 - Item ID-11693 - Michelle 800-315-9950 x6061994 Hydro-Ax 611E Feller Buncher - Flotation tires at 75%, good overall condition. Works daily, 24” ax head, new injection pump, exceptionally clean operators station. - Item ID-11302 - Daren 800-315-9950 x6031994 John Deere 640E Cable Skidder - Screened in Cab, 23.1 x 26 tires Ice chains rear and Bear Paws on the front. Exellent condition. Hrs are 11,000 - Item ID-11653 - Michelle 800-315-9950 x6061994 Komatsu WA-180 - Diesel, forks (no bucket), A/C, new belts, ejection pump redone, hydraulic pump redone, differential rebuilt, center pin replaced, solid tires, runs good, good appearance. In Pennsylvania. - Item ID-11394 - Daren 800-315-9950 x6031994 Prentice 210D - Grapple built for scrap iron, straight machine, joystick controls, radio works. Nice machine. 9600 hours. - Item ID-11301 - Daren 800-315-9950 x6031995 Diamond Z 936 Tub Grinder - Tub grinder with single axle. Powered by a Cat diesel engine. - Item ID-11882 - Michelle 800-315-

9950 x6061995 Franklin 4000 w/Roto Saw - Includes a 1995 Roto Saw, 4 BT Cummins, Heat and Stereo. Runs and looks great. - Item ID-11662 - Michelle 800-315-9950 x6061995 Hydro-Ax 411E, 7236 hours, 18” Koehring Sawhead, 28L-26 Tires, 4WD, inclosed cab w/heat - Item ID-11673 - Daren 800-315-9950 x6031995 International 4700 Grapple Truck - 14’ Brush body, 4-1/2 ton boom, DT 466 engine, spring suspension, 239902 on the odometer. - Item ID-11883 - Michelle 800-315-9950 x6061995 International 9300 Log Truck - Tri-axle, with 235,000 original miles. Has 2007 Hood 7000 loader. Drive tires are 98% stear tires are 50% and tag tires are 50%; Dayton hubs. 46,000 rears. - Item ID-11502 - Michelle 800-315-9950 x6061995 MORBARK 1250, Fixed Hammers, Knuckle Boom, Cab, and 36” Tarantula Heavy Duty Grapple, Tripple Axle, Magnetized Pulley Conveyor, Cat 3412DITTA, 750HP Engine. 1st Hour Meter Replace:6425. 2nd Hour Meter Replaced: 634. - Item ID-11704 - Daren 800-315-9950 x6031995 Prentice 210D Log Loader with tag-a-long delimber - 1995 Prentice 210D Log Loader with tag-a-long delimber, 6000 actual hours, Located in Alabama - Item ID-11438 - Daren 800-315-9950 x6031995 WHO P12-56 Tub Grinder, Cat 500 hp, hyd raising tub, updated/new hammer mill, new tub floor, clean unit ready for work. - Item ID-11818 - Daren 800-315-9950 x6031996 Bobcat 773 skidsteer loader with bucket and flotation tires $10,000 - Item ID-11839 - Michelle 800-315-9950 x6061996 Cat 515 Grapple Skidder - John Deere winch, tires are 60%, 4 bearpaw chains, - Item ID-11305 - Daren 800-315-9950 x6031996 Caterpillar D5H - 140-hp 10’6” 6-way blade. New undercarriage, very clean. - Item ID-11306 - Daren 800-315-9950 x6031996 Freightliner 120c, knuckleboom mounted behind cab, Cat 10 speed. Great for picking up logs and loading. - Item ID-11435 - Daren 800-315-9950 x6031996 GMC Topkick - Includes 3126 Cat Automatic transmission. Has an Ampiroll 90L Hook Lift installed that has 12,500 pound capacity. Truck runs well. - Item ID-11101 - Michelle 800-315-9950 x6061996 Morbark 2400 Chipper, Twin Disc Clutch,New Paint and Decals,Panels in Great shape,Pintle Hitch,New Knives,12X16.5 Tires - Item ID-


Make Protective Banding Stripswith the NEW Baker Banding Notch Groover!

Make 2 banding

strips at a time!

banding strips are used to protect products banded to pallets.

(800) 548-6914www.logtolumber.com

Perfect for any pallet mill or anyone who bands goods to pallets, the

Baker Banding Notch Groover can crank out up to two thousand 40”-

long banding strips an hour! Simply insert a 2!6, and out come two perfect banding strips. Nothing

could be easier! Call or write Baker Products todayfor more information.

11879 - Daren 800-315-9950 x6031996 TIMBERJACK 460, CAB, AIR, DUAL ARCH/YO, OVERALL CONDITION OF MACHINE IS GOOD, 5408 hours - Item ID-11539 - Daren 800-315-9950 x6031996 TIMBERJACK 460 Grapple skidder - 10,850 hours, 4wd, Cummins Engine, OROPS - Item ID-11695 - Daren 800-315-9950 x6031996 Vermeer TG400 Tub Grinder - Powered by a Cat 3406 400-hp diesel engine and has only 1432

hours. Has discharge conveyor. Well maintained. - Item ID-11486 - Michelle 800-315-9950 x6061997 Cat 515 Skidder - Cab has A/C. Has 28L26 tires. Engine rebuilt 9 months ago. - Item ID-11857 - Michelle 800-315-9950 x6061997 CATERPILLAR D5H TSK II, 6330 hours, 6/Way Dozer, Canopy w/Sweeps, Winch, Esco Single Function Grapple :U/C 60% approx., Pads 22in SBG R/P/B 50% SEGS 50% BAL,50%

Track Guards : Front/Rear/ Side Screens, Grapples w/Ext, shipping dimensions weight 43,000lbs HEIGHT 10ft 5in LENGTH 17ft 10in WIDTH 8ft 9in - Item ID-12012 - Daren 800-315-9950 x6031997 TIMBERJACK 460, Timberjack 460 Log Skidder, EROPS with A/C & Heat, Serial #962609, 7303 hours - Item ID-11537 - Daren 800-315-9950 x6031998 Bell Ultra THP - Totally rebuilt, 7-1-08. engine,trans,drive

motors, reconditioned a/c. New primeX 23x26 tires,new 3/4 rud multi-ring chains. New firestone rear tire. 30” dangle saw. Working daily. 5300 total hours. - Item ID-11679 - Daren 800-315-9950 x6031998 Link-Belt 2800 - Runs and works good. 10,000 hours. Fluids changed at 9,000 hours. - Item ID-11650 - Michelle 800-315-9950 x6061998 Prentice 210E mounted on trailer, joystick controls has the extra hydraulics to run a slasher


2001 Husky 285 Truck Mount LoaderLever Controls; Runs good.Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

Mereen-Johnson 431-DC Gang Rip Saw w/ LaserItem ID: 12019Contact: Michelle 800.315.9950 Ext. 606www.LBXonline.com

1990 Ford A64 Wheel LoaderItem ID: 12032Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com

2005 CAT 525B Grapple SkidderItem ID: 12028Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

or delimber but this loader has never had a delimber on it. installed new floor mat, had the seat recovered, changed all fluids and filters, resealed the joystick controls, and worked on the trailer landing gear - Item ID-11833 - Michelle 800-315-9950 x6061998 Prentice 210E - Loader has worked on small wood yard, level controls, John Deere engine, saw hook-up, good trailer - Item ID-11439 - Daren 800-315-9950 x6031998 PRENTICE 620 WITH DENNHARCO DHT550 COMPUTERIZED MEASURING-TOPSAW-BUTT SAW-FORESTRY CAB and 8,540 hours - Item ID-11888 - Daren 800-315-9950 x603

1998 Timberjack 460 Skidder, dual arch, winch, 30.5x32 rubber, enclosed cab, Cummins engine - Item ID-11535 - Daren 800-315-9950 x6031998 Volvo truck w/160 Barco Log Loader - 1998 Volvo truck w/Volvo diesel engine, 5 speed transmission - Air brakes 160 Barco Log Loader 4 cylinder Detroit diesel engine Hydraulic system is good Runs great - Item ID-11436 - Daren 800-315-9950 x6031999 BELL TF120B Feller Bunchers, one owner machine, it is on D5 cat tracks, Hours not known; meter not working. - Item

ID-11480 - Daren 800-315-9950 x6031999 Cat D5C LGP w/ Mann rake new under carriage (20 hours), 4000 original hours, new Hystat system rebuilt by Cat when under warranty at 3500 hours, includes Mann rake, 6-way blade, OROPS, new paint and decals, very nice located in Michigan - Item ID-11822 - Michelle 800-315-9950 x6061999 TIMBCO 425, s/n AT4C-1605-091399, hours: 8,599, Machine is ready to work - Item ID-12006 - Daren 800-315-9950 x6031999 TIMBERJACK 460 Grapple Skidder, Single Funct Grapple, 30.5 Tires, hours 9999, Serial # : 995940

- Item ID-11696 - Daren 800-315-9950 x6032000 Morbark 30/36 - Morbark 3036 New $30,000 upgrade done by factory including HD drum, new belts, bearings Hyd. pump. babbitt knives cat 3306 turbo engine with 335 HP new brakes, new paint and decals no leaks or drips never any trouble with engine. This 2001 is in great shape and ready to work!! - Item ID-11804 - Michelle 800-315-9950 x6062000 Morbark 3036 Whole Tree chipper - Loader, Joystick controls with A/C and heat. New drum and


FAX TO:

‘08 John Deere 444-J Wheel Loader721 hrs., log forks & top clamp, like new

Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

‘04 JD 548-GIII S/A Grapple Skidder3,812 hrs., Good ConditionContact: Tom800.315.9950 Ext. 604

www.LBXonline.com

1988 Multitek 2040XPx Firewood ProcessorItem ID: 12015Contact: Michelle800.315.9950 Ext. 606www.LBXonline.com

1989 Kenworth T800 Log Truckw/Log Trailer Item ID: 12001Contact: Michelle800.315.9950 Ext. 606

www.LBXonline.com

bearings. serial# is 4661100-3036 - Item ID-11363 - Daren 800-315-9950 x6032000 TIMBERJACK 460 Skidder - 30.5 ISD Tires, 6BTA Cummins, 120 Esco Grapple, 8900 hours - Item ID-11538 - Daren 800-315-9950 x6032001 Morbark 3036 - Whole tree chipper, powered by a 325-hp Cat diesel engine; has self-loading grapple; one year old heavy duty drum and runs great. - Item ID-11587 - Michelle 800-315-9950 x6062001 ROTOCHOPPER MC166, 3600 hours, Cat 3406 460 hp, includes coloring attachment - Item ID-11692 - Daren 800-315-9950 x6032002 773G Bobcat - Has 3900 hours and a Kubota diesel. - Item ID-11497 - Michelle 800-315-9950 x6062002 Case 90XT Skidloader - has 1950 hours, 7’ bucket. - Item ID-11675 - Michelle 800-315-9950 x6062003 Cat 247 Track Skidloader - New rear bogie wheels, hydraulic quick attach, vertical lift self leveling bucket. Machine has only

1100 hours. Was well maintained and is ready to work. - Item ID-11348 - Daren 800-315-9950 x6032003 Cat 525 Grapple Skidder, S/N 3KZ00897, 10,496 Hours, EROPS, ESCO Grapple w/ winch, 30.5 X 32 Tires 60%. Machine is in Tennessee - Item ID-11986 - Daren 800-315-9950 x6032003 Morgan 2 Saw Trimsaw, this machine was bought new and never was really used, less than 50 hours if that, machine has never been painted it wwas just not used. - Item ID-11904 - Daren 800-315-9950 x6032003 Rotochopper CP118 Portable wood chip processor with coloring unit. This machine runs good but has an electric problem it keeps flipping the circuit breaker for the conveyor and auger Sold at this price As Is needing work to electric has extra screens, 2” screen. Will produce 35 - 40 yards per hour - Item ID-11973 - Daren 800-315-9950 x6032003 ROTOCHOPPER CP118, 80hp,

790 hours, CAT diesel engine, fixed hammers, one-pass re-grind & coloring system. - Item ID-11287 - Daren 800-315-9950 x6032004 BANDIT 3680 Beast Horizontal Grinder, approx. 4500 hrs., working Daily - Item ID-11819 - Daren 800-315-9950 x6032004 Bandit Beast - Powered by a V12 800-hp Cat diesel engine. 2300 hours. Photos coming soon. - Item ID-11233 - Michelle 800-315-9950 x6062004 BARKO 495ML, 7068 hours, heat and air works great, 6cyl Cat s/n#3539, Strong loader and is ready to work - Item ID-11905 - Daren 800-315-9950 x6032004 Bobcat S185 w/ high flow - 2004 Bobcat S185 skidsteer, turbo diesel, 56 HP, 1700 hours, well-maintained skidsteer, everything is working. - Item ID-11840 - Michelle 800-315-9950 x6062004 Cat 287B - 2004 year model, on tracks. 1390 hours. Cab with A/C and hand controls. Tooth bucket. This is a one owner

machine. - Item ID-11652 - Michelle 800-315-9950 x6062005 Bobcat S175 w/ grapple bucket - 2005 Bobcat S175 945 hours, always stored indoors, keyless entry, backlit status screen, new microfiber seat, high flow, includes grapple bucket, good tires, dealer maintained. - Item ID-11842 - Michelle 800-315-9950 x6062005 DEERE 748G III with Grapple and Winch - 2005 DEERE 748G III with Grapple and Winch, 5,654 hours, NEW Center Section, 30.5x32 Tires, Tires ar 75% all around, This is a super nice Skidder and is working daily - Item ID-11976 - Daren 800-315-9950 x6032005 John Deere 550J - This has only 1981 hours, has a cab with A/C, 24” pads, rear cab screens and front limb risers. The pins and bushings have been turned and the sprockets have been replaced. - Item ID-11661 - Michelle 800-315-9950 x6062005 Rayco RC12 Chipper - John Deere engine with 500 hours, ulsating down pressure, like new


Superior T1 Turning Bar

Sering in-house premium high volume power

Ergonomic.

Heavy Duty application.

size to suit

THE BEST TURNER SOLD!

As seen on

™

Meet the Monster with the

Gentle Touch

Meet the Monster with the

Gentle Touch

The SERING LOG TURNER WILL INCREASE YOUR SAWMILL’S PRODUCTION

!e top four HARDWOOD producers depend on their Sering. You should too!

SERING SAWMILL MACHINERY CO., [email protected] Since 1983

CALL NOW360-687-2667

condition. Machine is capble of chipping 12” wood. This machine is all but brand new. Has been kept in garage. - Item ID-11351 - Daren 800-315-9950 x6032006 Caterpillar 287B Track Skidloader - Hydraulic quick attach, vertical lift, self leveling 83” bucket, auxillary hydraulic.

600 hours. - Item ID-11352 - Daren 800-315-9950 x6032006 Eco-Log 580B - 2700 hours. Powered by a 250-hp Cat diesel engine. Logmax 7000b Harvesting head. Very motivated seller. - Item ID-11250 - Michelle 800-315-9950 x6062006 Morbark 18 chipper - 180hp

Cat, 160 hours, tandem axle. 10,000lbs, curbside jack, 65” x38” feed chute, 36” drum with controlable airflow, 48 gallon lockable fuel tank, manuals and paperwork included. - Item ID-11355 - Daren 800-315-9950 x6032006 PRENTICE 384 mounted on a Mack Truck - 2006 PRENTICE 384

mounted on a Mack Truck, 4600 hours, has been on a yard since 2006 - Item ID-12008 - Daren 800-315-9950 x6032006 Rotobec 80 Elite - NEW! Rotobec 80 Elite. Many to chose from. - Item ID-11356 - Daren 800-315-9950 x6032007 Bandit 250 XP Brush Chipper - SN: 022597, Hour Meter Reads: 662, 12 Cap., Diesel, 86 HP, Spring Susp., Elec. in georgia - Item ID-12004 - Michelle 800-315-9950 x606NEW 2008 ASV Posi Track RC100 skidsteer loader, has low and high flow, only 600 hours! Easy, Comfortable Operation The RC-100’s operator station has more features and built-in comfort than ever before. New joystick controls feature integrated hydraulic and electric attachment controls for precise, low-effort operation. A new hydraulically-operated quick attach is standard so you can connect to many non-powered tools without leaving the operator seat. Tilt-up Service Access A new tilt-up ROPS/FOPS canopy makes access to the hydraulic system quick and easy. Service to the engine and cooling package is through a tilt-up rear hood. - Item ID-11859 - Daren 800-315-9950 x6032008 Bobcat S175 - 2008 Bobcat S175 only 17 hours!, 46 HP, 68” low-profile bucket, 8 bolt-on teeth Weight: 6,001 - 6,500 lbs $24,000 OBO - Item ID-11841 - Michelle 800-315-9950 x606225A Timberjack Skidder - In ready to work condition. 1986 year model with a 353 Detroit engine. - Item ID-11991 - Michelle 800-315-9950 x606230 Timberjack Forwarder - Late 70’s model forwarder. Is powered by a Detroit 353, has a Husky Brute loader, tire size is 24-5-32. Engine completely rebuilt 3000 hours ago. - Item ID-11993 - Michelle 800-315-9950 x606380 Timberjack - ‘81 453 Detroit w/ the gearmatic wynch. Transmission just rebuilt, along with converter, New starter and new injectors. New Tork converter. Front tires about 50% back about 25 to 30% Reason for selling is that don’t need it. - Item ID-11499 - Michelle 800.315.9950 x606510 International Wheel Loader - Please call for information. Photos coming soon. - Item ID-11990 - Michelle 800-315-9950 x606518 Cat Grapple Skidder - Late 80’s 4WD Drive; Cat winch, maintained machine.; 30.5 x 32 Tires, 95% rubber. 130-hp, all pins are good. - Item ID-11078 - Michelle 800.315.9950 x606


EXPERTLY BUILT AND SOLD by a company you can depend on!

Newman G-200Fulghum Chipper 2Brewco 2-Head250 hp WEG Softstarter

Pendu GangNewman Shaving MillMDI Whole Log Metal DetectorJeffrey Hog

Jeffrey 45WB Hammer Hog

(800) 319-8871


2004 Deere 648G IIIItem ID: 12030Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com

2005 Deere 748G IIIw/Grapple & WinchItem ID: 11976Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

1989 CAT D5H TSKItem ID: 12029Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

98’ 620 Prentice Track Cutter - Quadco saw / 80% under carriage / rebuilt finals / John Deere engine 6,00 hrs. on it. - Item ID-10479 - Michelle 800.315.9950 x606Barko 160A with Chop Saw - 1992 year model. Chop Saw 2000 or 2001 included. - Item ID-11117 - Michelle 800-315-9950 x606Barko Fellerbuncher 785 - 1999 year model with a 22” Koehring head. - Item ID-11334 - Daren 800-315-9950 x603Bell Super T - 1992 year model,

serial number BCH3953, 23.1x26 tires. Needs a head - Item ID-11898 - Michelle 800-315-9950 x606Bell Ultra C - 1997 year model, with Cummins 3.9 110-hp 4 cylinder diesel engine. A/C in cab. 18” Koehring saw felling head, joystick controls. 600 hours on Reman Cummins engine; 5073 total hours on machine. Very good condition. - Item ID-10803 - Michelle 800-315-9950 x606Bell Ultra T - 1997 year model with 1989 hours. 23.1 tires are at 90%,

joystick controls, extra 24” bars, new seat, no dents or broken glass. Dangle head. Currently working. A/C in cab. S/N BCH4648 - Item ID-10727 - Michelle 800-315-9950 x606Bobcat 843B Loader - Grapple loader, photos and more info coming soon. - Item ID-10777 - Michelle 800-315-9950 x606Case 580 Fork Lift - Mid 70’s Fork Lift 580 Case, High Lift, Good Condition - Item ID-11493 - Daren 800-315-9950 x603

Cat 242B Skidsteer - 2006 year model. 300 hours on machine. Cat engine. Includes bucket, forks, spare tire and chains. - Item ID-

Highest Production

Lowest Maintenance

GUARANTEED!!!

Trailer: Tandem axle, 8’6” wide, 22’-30’ long, 11’8” high, 5-7 tons, Electric brakes.

Saw: Superior Carbide Slasher - Cut wood instead of sharpen chains 36” to 60” diameter, 2 ga Carbide Slasher.

Engine: 50 to170 HP or PTO Drive with user’s tractor.

Hydraulics: Commercial Shearing

Splitter: 35 - 72 tons, 3-5 second cycle time; 2, 4, 6, 8, 10, 12, 14 & 21 way pkg wedge. Capacity - 4” to 27” Log diameter 0” to 48” Block Length

Lifetime warranty on the entire splitter chamber.

Infeed Conveyor: 16” - 30” long Hydraulic powered.

Clean out Hopper: Get rid of bark and wood slivers before being conveyed away.

2040 ROGERS ROAD,PERTH ,ONTAR IO K7H 1P9CANADA

NEWGRAPPLESYSTEMNow Available!

Today!888-219-9663


Induction hardened teeth for harsh cutting conditions

Extensive fl ex life allowing multiple sharpenings

Largest selection of widths, thicknesses, and profi les

800.522.5760 | SawFaster.com

Lames à bande d'alliage haute qualité

Lames à bande d'alliage haute qualité

PROF

ILE GROUND TOOTH

1991 Bell Super-T FellerbuncherItem ID: 12022Contact: Daren 800.315.9950 Ext. 606

www.LBXonline.com

‘08 John Deere 2554 Tracked Harvester4,700 hrs., Waratah 624 Harvesting HeadContact: Tom800.315.9950 Ext. 606www.LBXonline.com

10845 - Michelle 800-315-9950 x606Cat 518 Grapple Skidder - 1980 year model with grapple, winch and canopy. Hours unknown; no meter. - Item ID-11103 - Michelle 800-315-9950 x606Cat 518C Grapple Skidder - 1995 year model. With grapple & winch. 12000 hours - 200 hours since engine and transmission were rebuilt. Really good condition. Tires are 28 X 46. Open cab. - Item ID-11293 - Michelle 800-315-9950 x606Cat 545 Grapple Skidder - 2003 year model. Please call for information. - Item ID-10996 - Michelle 800-315-9950 x606Cat 545 Grapple Skidder - 2004 year model. Call for more information. - Item ID-10997 - Michelle 800-315-9950 x606Cat 8000# Forklift - 1985 year, V80E type d. Axle repaired and transmission fixed. - Item ID-10674 - Michelle 800-315-9950 x606Cat D4H-TSK - 1996 year model with 1900 hours. Full forestry package; winch and Esco Grapple. Works great, runs daily. Must sell!!! - Item ID-11003 - Michelle 800-315-9950 x606Cat D5M XL Dozer - With EROPS, Sweeps and screens. 50,000 pound W5C winch. 3490 hours. New

factory log arch. Very clean and straight machine. - Item ID-11253 - Michelle 800-315-9950 x606Cat D6D Dozer - Dozer with new undercarriage, ripper, fresh overhaul, no oil leaks, one set of hydraulic outlets; runs strong. 1983 year model. - Item ID-11495 - Michelle 800-315-9950 x606Caterpillar D6R with winch, hours 8211, s/n 5LN00696 - Item ID-11906 - Daren 800-315-9950 x603CBI Magnum Force 4800 - 2001 year model, 3000 hours, magnetic head pulley, heavy duty grate liner with cutting anvil, 3412E 1000-hp Cat engine with Flexx Aire Fan. Solid steel rotor. Hammers, grate liner and discharge belt have been replaced and have less than 100 hours on them. - Item ID-10577 - Michelle 800-315-9950 x606DEERE 440, sn#090370, with a winch - Item ID-11431 - Daren 800-315-9950 x603Dura Tech HD-8 Tub Grinder - Haybuster tub grinder, 8’ opening on tub, 16” x 10’ discharge conveyor, trailer mounted, 215/75R17.5 tires, John Deere diesel engine 110-hp, 705 hours. New clutch, new hitch and new oil temperature guage. Maintenance done, changed out fuel and oil filters; changed the oil. - Item ID-

11803 - Michelle 800-315-9950 x606Duratech HD-8 - This tubgrinder has an 8’ tub with a tub extension. It has just over 700 hours. It is powered by a 125-hp John Deere diesel engine. It has new hammers. 1994 year model. Tub extension is 10’3” wide and bolted on, so it can easily be removed for shipping. - Item ID-10804 - Michelle 800-315-9950 x606Duratech HD8, tub grinder w/ coloring unit - Duratech HD8

Duratech / Haybuster HD8 tub grinder with coloring attachment, John Deere, 130 horsepower, 1100 hours, swing hammers, magnet on 5’ conveyor, variable speed tub with load sensor, 3 sets of screens, 3”, 2”, and 1.75”, 90’s model - Item ID-11867 - Daren 800-315-9950 x603Duratech IG-10 Tub Grinder - Powered by a 300-hp diesel engine. Has 3000 hours. Magnet on the discharge. New hammermill and new belts. 2”


screens. - Item ID-11320 - Michelle 800-315-9950 x606Fecon 3250 Horizontal Grinder - 1995 year model, powered by a Cat 3306. Includes remote control. Has only 1000 hours. - Item ID-10798 - Michelle 800-315-9950 x606Fecon MZA 2500 - 2004 year model with 400 hours. Cat diesel engine,

250-hp. S/N 2S000692164 - Item ID-10799 - Michelle 800-315-9950 x606Ford Tractor with Trailer - 1989 Ford Tractor truck with 48’ Great Dane Trailer - Item ID-10671 - Michelle 800-315-9950 x606Franklin 105 and shred king forestry machine - Both units powered by detroit engines,

excellent condition, will separte the units, also have 16” Morbark sheer head for the franklin. serial#fe0159 Model #8000FE - Item ID-10415 - Michelle 800-315-9950 x606Gehl 3935 Skidloader - 2005 year model with less than 2000 hours. - Item ID-10643 - Michelle 800-315-

9950 x606Gehl 7800 Skidloader - 2004 year model with enclosed cab. Has radio and heat. - Item ID-11649 - Michelle 800-315-9950 x606Gyro Trac GT25 - Machine has 1278 hours. - Item ID-11801 - Michelle 800-315-9950 x606Haybuster H1000 PTO Tub Grinder - Tub has been re-inforced. Belts are almost new. Mid 80’s model. Has either 2 or 3” screen. Is 10’ wide at top of flair. TRANSPORT DIMENSIONS Width 10 ft. 3 in. (3.12 m) Length 21 ft. 4 in. (6.50 m) Height 10 ft. 2 in. (3.10 m) - Item ID-11554 - Michelle 800-315-9950 x606Haybuster IG-8 Tub Grinder - Powered by a 110-hp John Deere diesel engine. Has only 1034 hours. Includes a 1” and 1-1/2” screen. 8’ discharge conveyor. - Item ID-11426 - Michelle 800-315-9950 x606Hokah mill tie trim and stack station - The electric eye which stops the ties on this 8’ - 12’ trimmer is adjustable so that the sawyer can determine to trim more off one end or the other. Conveyors to take away cut off blocks are part of the system as is the stacker. This item has it’s own integral hydraulic unit in the base. - Item ID-11724 - Michelle 800-315-9950 x606Hood 28000 Loader - Year model 2004; 72” hot saw; only 340 hours. - Item ID-11418 - Michelle 800-315-9950 x606Hydro-Ax 411 - Powered by a 6 cylinder Cummins, has 18” Koehring Sawhead and approximately 11,000 hours. Is a 1993 or 1994 year model. Photos coming soon. - Item ID-11532 - Michelle 800-315-9950 x606Hyundai with 2 Head Roller - 1994 Hyundai with 820 roller stroke Lakewood head. - Item ID-10977 - Michelle 800-315-9950 x606JCB 540 Wheel Loader - 2000 Year model. 4X4, 2-1/2 yard quick attach bucket, Extenda hoe, cab with heat and A/C, 5628 hours, one owner and well maintained. - Item ID-10774 - Michelle 800-315-9950 x606John Deere 240 - Skid Loader 52HP 1785 Hours. Excellent Condition. 12x16.5 Tires 75% More Details Soon. THANKS FOR LOOKING. - Item ID-11799 - Daren 800-315-9950 x603John Deere 290 - With Elite processing head, 2 roller. 4 cylinder John Deere engine. Very good undercarriage. - Item ID-10934 - Michelle 800-315-9950 x606John Deere 410D - Backhoe, front end loader, new tires, starts easy


REAL TUFF BALER&BAGGERTM

Phone: (325) 641-8300 Fax: (325) 643-3243Manufactured by M & F Gauge & Specialty Co., Inc.

PO Box 693 • Brownwood, Texas 76804www.realtuffbaler.com

$13,907

BUILT TO LAST

Save $$$ on Bedding—Bale it Yourself!Electric or Diesel, Manual or Automatic

Real Tuff Baler Dimensions & Specifications- (2) Hydraulic Cylinders are controlled by

using a two spool valve

- 30 H.P. motor (220/440 volt 3 phase) starter not included

- 25 G.P.M. Pump

- 50 Gallon reservoir capacity

- Only the highest quality industrial com-ponents are used

Morrison/Knudsen Rotary Hog

(800) 319-8871


1998 Cargo Walking Trailer45 ft. x 102 in.Item ID: 11998Contact: Michelle 800.315.9950 Ext. 606

www.LBXonline.com

‘05 Tigercat M726 Mulcher3,100 hrs., Fecon Mulching HeadContact: Tom Ph: 800-315-9950 x604www.LBXonline.com

and runs great. - Item ID-10726 - Michelle 800-315-9950 x606John Deere 450B - with winch and blade - Item ID-10655 - Michelle 800-315-9950 x606John Deere 548 D Grapple Skidder - John Deere 548 D Grapple Skidder, 23/1x26 rubber at 90%. Enclosed cab, no winch. - Item ID-11558 - Daren 800-315-9950 x603John Deere 640E Cable Skidder - 1995 year model. 500 hours on new motor. Has new winch, new center, new batteries and heavy duty rears. This machine runs great and is ready to go to work. - Item ID-11330 - Daren 800-315-9950 x603John Deere 640E Skidder - 1993 year model, 6 cylinder, powershift transmission, no leaks - Item ID-11989 - Michelle 800-315-9950 x606John Deere 643D - 1995 year model. 22” kohring sawhead. tires are 70%, Motor is new replaced last month, 8000 hours on machine. heated and A/C cab. - Item ID-11414 - Daren 800-315-9950 x603John Deere 648D Skidder - Has new hydraulic pumps, has winch, runs great, 8332 hours. - Item ID-11711 - Michelle 800-315-9950 x606John Deere 650H - 2000 year model in great condition. 10’6” blade with 24” new pads. Hydrostatic transmission. 4795 hours. 90-hp. - Item ID-10560 - Michelle 800-315-9950 x606John Deere 843H - 2001 year model. 28/26 tires at about 60%. Waratah head, all pins are tight and sheet metal is straight. - Item ID-11337 - Daren 800-315-9950 x603Koehring Hot Saw - 22” head. Very good condition. The bottom pin is 2” around and 12” long. The top pin is 2-1/2” around and 4-3/8” long. - Item ID-11469 - Michelle 800-315-9950 x606Manitou MLT523 - MLT523 Turbo, 2005 year model, Perkins diesel, new front foam filled tires, rear tires are good. 17’ height reach and 8’ straight out, 4 or 2 wheel steer, enclosed cab with air and heat, 1750 hours, has extra grapple bucket. - Item ID-11605 - Michelle 800-315-9950 x606Massey Ferguson 6170 Tractor - This tractor is a year model 1998; it has air in the cab, shuttle shift, 85 to90% rubber on the tires and only 2468 hours. It is 120-hp. Is 4-wheel drive. - Item ID-10546 - Michelle 800-315-9950 x606Metavic Log Loader trailer - Log loader trailer is 2 years old, has 12’ boom with a 30” grapple. 12’ bunk, will hold 20” logs/polewood, has 6500lb winch, 110’ 5/16” cable. - Item ID-11362 - Daren 800-

315-9950 x603Mitsubishi Log Loader - High cab, 66,000 weight, low use with good undercarriage. Has a new starter. Has grapple - Item ID-10780 - Michelle 800-315-9950 x606MODEL 1300 SELF CONTAINED TUB GRINDER - MODEL 1300 SELF CONTAINED TUB GRINDER, CAT DIESEL ENGINE, READY TO WORK, CAB W/ A/C - Item ID-11792 - Michelle 800-315-9950 x6061993 Morbark 1050 Tub Grinder, 4100 hours on a 3406 CAT diesel engine, Magnetic head pulley, wood chip coloring attachment, and self loader (grapple), 6 sets of screens (4 - 4x6 inch screens, 1 - 2 inch screen, and 1 - 1 inch screen), Extra hammers, tips, nuts and bolts, wheel base, and tons of other small parts, Spare (new) hammermill, Recently changed clutch, hydraulic motors and hydraulic pump, The unit can easily grind over 100 cubic yards an hour and has a variable speed control. - Item ID-11312 - Daren 800-315-9950 x603Morbark 1200 Tub Grinder - 1993 year model; rebuilt by Morbark in 1999. Equipped with grapple, 650-hp Cat Diesel engine, rebuilt clutch, rebuilt hammermill, oversized hammermill and wider-longer conveyor. - Item ID-10773 - Michelle 800-315-9950 x606Morbark 1200 Tub Grinder - Powered by a Cat 3412 650-hp diesel motor. Includes a Morlift 350 grapple; lots of new parts; freshly painted; air compressor; heat and A/C in the cab; magnetic head pulley. - Item ID-11660 - Michelle 800-315-9950 x606Morbark 2400XL 20” Drum Chipper with Grapple - 2003 Morbark Model 2400XL Hurricane, 20” capacity hydraulically feed drum chipper with a Morlift 150 grapple, Cummins 260 HP

turbo diesel engine, 2655 hours, hydraulic down riggers, tung jack and chute turner, dual feed rollers. - Item ID-11678 - Daren 800-315-9950 x603Morbark 2600 Portable Grinder - 2007 Year model. 321 hours. Portable wood hog. Powered by a 250-hp Cat diesel engine. Can choose from a 3” x5” rectangular screen or a 4” octagon screen. This machine is $220,000.00 new. Does have full warranty - Item ID-10743 - Michelle 800-315-9950 x606

Morbark 290 Wood Chipper - everything done and ready for spring , great machine for landscaper or a second back up


Over

Years


EXPERTLY BUILT AND SOLD by a company you can depend on!

Our New Shaving MillsBig Production Affordable Price!

800-241-8983FAX 706-324-0047

Our New Shaving Mills Give You Big Production at an Affordable Price!

Financing Available

Expertly built and sold by a company you can depend on.

dynamically balanced

machine for a small tree company, chipper has always started and chipped, extra sharpened blades, it has a cummins diesel engine, 88 horse power, has new tires and brakes - Item ID-11897 - Daren 800-315-9950 x603Morbark N-viro Mulch 2000 - 1994 year model. Powered by a 21-hp Kuboto Diesel. Has a 5 yard infeed hopper, mixing screw and colorant pump. 35’ auger, new motor on color pump and can process around 30 yards per hour. - Item ID-10551 - Michelle 800-315-9950 x606Morbark Tree Shear - 20” Morbark SB52 Superbuncher tree shear. - Item ID-11468 - Michelle 800-315-9950 x606Prentice 180 Loader - Please call for information - Item ID-10917 - Michelle 800-315-9950 x606Prentice 210D - 1991 year model, 30’ boom and S&M Trailer. 6 cylinder BT Cummins (about 140-hp) - Item ID-10602 - Michelle 800-315-9950 x606Prentice 210D Loader - 1996 year model; runs good. Has rebuilt grapple and cylinders. - Item ID-11514 - Michelle 800-315-9950 x606Prentice 310E Knuckleboom Loader - 1999 year model,

with CTR delimber, air & heat, Cummins power and 7900 hours - Item ID-10916 - Michelle 800-315-9950 x606Prentice 720 Processor - With 33” Timbco Sawhead, 8.3 Cummins diesel engine, 5400 hours. Also track chains & sprockets are about 40%. - Item ID-11318 -

Michelle 800-315-9950 x606Serco 8500 Log Loader - Model 8500, Not mounted - Item ID-12007 - Michelle 800-315-9950 x606Skylead Yarder - $40,000 in new parts. Brand new motor 300 hours ago; new turbo, injector pump, new lines, new radios, new batteries, new haulback brake,

new drive chain, strawline brake, etc. In good condition. 1999 year model. - Item ID-11527 - Michelle 800-315-9950 x606Tigercat 860 Stroke Delimber - 1999 year model bought new in 2001. Excellent condition and ready to work. Delimber is a Denharco DM3500. Machine is a


PIPER’SSaw Shop

800 • 845 •6075

Promotional Pricing OfferSimonds Red Streak Hard Back

1-1/4” x .042 x 3/4” or 7/8”Length 13’2”

$14.27 eachTell us you saw it here!

Limited

Time

Only

one owner, one operator machine. - Item ID-11886 - Michelle 800-315-9950 x606Timbco 415C - 1998 year model with Fabtek 4-roller processor head. John Deere 6 cylinder 170-hp diesel engine. Hydrostatic transmission. Runs great, strong machine. Hour meter is not working. - Item ID-11063 - Michelle 800-315-9950 x606Timbco 425 Feller Buncher - 1996 year model with Quadco hot saw. 40” tilt, new pump and drive motor. Great shape. - Item ID-11031 - Michelle 800-315-9950 x606Timbco 425 with Bar Saw Head - 2002 year model powered by a 260-hp Cummins engine. Has 33” Timbco Bar saw head. Has 3300

hours, in good condition and very work ready. - Item ID-11340 - Michelle 800-315-9950 x606Timbco Forwarder - 1998 year model with 10,000 hours. - Item ID-11599 - Daren 800-315-9950 x603Timberjack 230D Skidder - 3-cylinder Detroit diesel. Hercules winch. Tires are good. Needs to be jumped across the starter, needs new starter and cylinoid. - Item ID-10561 - Michelle 800-315-9950 x606Timberjack 380 - Dual function grapple with winch. 30.5.32 rubber. 453 Detroit diesel. - Item ID-11072 - Michelle 800-315-9950 x606Timberjack 380 Grapple Skidder - Esco grapple, 453 Detroit Engine.

Engine and transmission are strong, pins are tight. 1980 Year model. - Item ID-10950 - Michelle 800-315-9950 x606Timberking B20 Sawmill with Edger - 2006 year model sawmill with 545 hours. Hydraulic log loader and turner; hydraulic log dog and toeboards; saws up to 21’ logs; computer setworks with 8 presets; debarker; 30-hp Kohler engine for sawblade and 5-hp Briggs & Stratton for hydraulic unit. Also includes a Miner 2-saw edger. - Item ID-11583 - Michelle 800-315-9950 x606Tree Farmer 3600 - 3 wheel, hotsaw attachment, 24.5x32 rubber, 6 cylinder Cummins and 6700 hours. 1999 year model.

- Item ID-10659 - Michelle 800-315-9950 x606Tree Farmer C5 - Great condition forwarder. Joystick controls, new tires. 1994 year model. Has 2000 hours on a factory reconditioned engine. Super grip loader bucket. - Item ID-11251 - Michelle 800-315-9950 x606UNIVERSAL REFINER PDR96 SUPER CONTENDER - 450 hp cummins, rebuilt engine & many wear parts replaced within 1000 hrs, machine has 6770 hrs on it. Discharge is a 20’ blower pipe. sn#PDR-96-12 - Item ID-11440 - Daren 800-315-9950 x603Valmet 546 - 1991 year model, 955 head, 6 wheel drive. - Item ID-10724 - Michelle 800-315-9950 x606“Vermeer 400L Tub Grinder - This grinder has a cab, grapple and magnetic head pulley. It is powered by a 400-hp Cat diesel engine. Unit is on a triple axle trailer and has only 2300 hours. Also a folding discharge conveyor. - Item ID-10539 - Michelle 800.315.9950 x606Vermeer Stump Grinder - Model 630A hydraulic stump grinder. - Item ID-11494 - Michelle 800-315-9950 x606WHO P-12 Tub Grinder - 1989 year model with 3486 hours. - Item ID-11873 - Michelle 800-315-9950 x606

LOG TURNERS2 Strand Deck - 16 foot long. 70inch c to c 2 strand deck. Elecric Drive. Has front side singulator. - Item ID-11782 - Daren 800-315-9950 x603Log deck headframe with Mellott chain turner. - Deck is intended for a RH mill. Chain spacing as viewed from carriage Right to Left: 0” -60” -118”. Turner is at 45”. Stop & Loader and deck drive shaft are 2-7/16”. Gearmotor is 3 HP (3 phase) with #100 Roller chain drive. Unit size: Length-132” Width-77” height-64”. Sprockets are 1” wide at tooth area. 12 tooth. 2-5/8” spacing. Would work for H-78 chain. - Item ID-11778 - Daren 800-315-9950 x603Mellot log turner & Hydraulic system - The Mellot Log Turnner Comes With With Joystick Control Valve And Hydraulic System. - Item ID-11752 - Daren 800-315-9950 x603

MISCELLANEOUS2006 Amerimulch Middie-Mite Coloring System - SN: MD 061630032, Hours Read: 995.3. Includes a 30 X 60 Radial Stacking Conveyor. - Item ID-12005 - Michelle 800-315-9950 x6069x30 Trommel Screen - This trommel is in good overall condition and is available


SAWMILL EXCHANGENorth America's Largest Source

of Used Portable Sawmills.

Over 800 Ads:

and Much More!!

The Place to Sell Your Equipment

800-459-2148 www.sawmillexchange.com

Serco 8500 Log LoaderItem ID: 12007Contact: Michelle800.315.9950 Ext. 606

www.LBXonline.com

HYSTER FORKLIFTItem ID: 12002Contact: Michelle800.315.9950 Ext. 606www.LBXonline.com

immediately. Price includes trailer loading. The electric motors and pump for the hydraulic system is also included as well as sheet metal cover and the support structure. Belly conveyor has been sold seperately. Low hours. - Item ID-11471 - Michelle 800-315-9950 x606Armstrong No. 4 Band Saw Sharpener - Right handed, automatic. Complete with motors, starters, carbide face plate, “Sidewinder” feed finger, one set of cams and a set of post brackets. - Item ID-10564 - Michelle 800-315-9950 x606Container - Refrigerated - Electrical motor controls installed in this 40’ container, several solid state reduced voltage starters, other starters, breakers, main transformer, etc. - Item ID-10957 - Michelle 800-315-9950 x606Cooks Sharpener - Electric band sharpener - Item ID-10898 - Michelle 800-315-9950 x606Dip Tank System - Installed in 1996. Tank is 10’ wide X 20’ long X 94” deep. Infeed deck is 21’ long X 13’6” wide. Infeed rollcase is 20’ long X 66” wide. Infeed drive is 10-hp. Outfeed rollcase

is 45’ long X 66” wide. 2 storage decks, one is 20’L X 11’3” W the other is 20’L X 10’3” W. Hydraulic unit is 50-hp, 3 phase. New cost $230,000.00. (Building in photos is not included.) - Item ID-10850 - Michelle 800-315-9950 x606Elec Route MD 500 metal detector. - Elec Route MD 500 metal detector. Coil unit 03100. 52” hex opening. (32” flats.) Distance thru: 59”. - Item ID-11756 - Daren 800-315-9950 x603Forano Shaker Screen - 5’X14’ double deck shaker screen. - Item ID-10958 - Michelle 800-315-9950 x606Galvanized duct piping - 300’ of 18” - $5.00 per foot, 300’ of 20” - $6.50 per foot, 50’ of 36” - $11.00 per foot, 35’ of 48” - $17.00 per foot. - Item ID-10848 - Michelle 800-315-9950 x606Goeing Kerr Tek Tamet metal detector. 50” x50” opening. Distance thru: 48-1/2”. - Item ID-11755 - Daren 800-315-9950 x603Hough 65 Motor for Salvage - w/ a good cummins CN6 motor & converter. - Item ID-10480 - Michelle 800.315.9950 x606Loading Ramp - Adustable height ramp, 66” x 30’. 15,000 pound

capacity. - Item ID-10596 - Michelle 800-315-9950 x606Lumber Carts - 15 carts available. Fairly new, very little use. $450.00 each. - Item ID-10904 - Michelle 800-315-9950 x606Lumber Carts - New - Either with US or import casters. Can also get with adjustable back-stop, $750 each with US casters, $700 each with import casters, add $225 to either for adjustable backstop. Call with any questions. - Item ID-10906 - Michelle 800-315-9950 x606

MDI Metal Detector - The opening dimensions of this MDI magnetic metal detector are as follows: Width-46”, height-38” distance thru: 36”. - Item ID-11754 - Daren 800-315-9950 x603Milling machine - Cincinnati #2 vertical milling machine. - Item ID-11797 - Daren 800-315-9950 x603Read Screen All RD90A - 1989 year model with two-deck screen, 2” top screen and 3/4” bottom screen. In great shape, has 2025 hours. - Item ID-11088 - Michelle


SHAVING MILL$24,999

24”w 2-head Mill with 4-knives in each head—easy knife adjustment. Box is 48” long and 30” deepIncludes cutter-head drive motors and hydraulic unitWeighs more than a Jackson of comparable size

877-847-5877

!"#$%&'(%)*+,%)-./01$2342+1(53627(+.0(+.8()69(

:6;(/%06'(9994<)-./0#$2342+1

We also offer:FurnacesKnife SharpenersConveyorsLog DecksCutterheadsBaggers

Optional:Conveyor, Electrical Panel, Portable Power Set-up (PTO or Diesel) Trailer Package

800-315-9950 x606Round table - 12’ round turn-table in like new condition. - Item ID-11467 - Michelle 800-315-9950 x606“Salem Hydraulic Unit - 20-hp, 1745 RPM, 1-1/2 hp circulating motor with 1720 RPM, Denison pump - Item ID-10851 - Michelle 800-315-9950 x606Wood Storage Silo - Two available. 14’ diameter X 30’ cylinder size. Caged ladders & guardrail with toe bar. Metering bins with discharge augers. Internal “”Flying dutchman” system. Wood or paper storage. - Item ID-10814 - Michelle 800-315-9950 x606

MOULDERS Fukami 6 head moulder - Fukami

6 head moulder NTX-150 - Item ID-11753 - Michelle 800-315-9950 x606

PALLET MACHINERYBob Hanna Double Head Pallet Notcher - Bob Hanna Double Head Pallet Notcher - Item ID-11815 - Michelle 800-315-9950 x606Bronco Model 2006 - Pallet nailing system with roll-out. Was used to build 48” x40”. New in 2005. One owner. still available as of 6/4/09 - Item ID-10542 - Michelle 800-315-9950 x606Bronco Pallet Machine - Model 300 with stacker can do a maximum of 54” x 54” - Item ID-10678 - Michelle 800-315-9950 x606Hawk Bandsaw Dismantler - Powered by a 3-phase, 15-hp

electric motor. Has a 64” table. Can be a one or two-man machine. Large tires for extended blade life. Capacity is 50-80 pallets per hour. - Item ID-11065 - Michelle 800-315-9950 x606Mark I Pallet Dismantler - Mark One pallet disassembler, one-man, 62” table Mark I - Item ID-11811 - Michelle 800-315-9950 x606Pallet Chief lll nailer - Pallet Chief lll auto naller Pallet Chief 3 - Item ID-11812 - Michelle 800-315-9950 x606Press for Applying Mending Plates - Pneumatic operated but is designed to easily switch over to hydraulics. Used in a business that specialized in non-standard

sized pallets. For long stringers, used this press to join shorter stringers together with a mending or truss plate. The frame is 9’ long and has 4 quick acting pneumatic cylinders to firmly hold the pieces to be joined in place. - Item ID-11068 - Michelle 800-315-9950 x606Smart Bandsaw Dismantler - 64” table. Two-man operation. Less than 100 hours on a complete rebuild. Powered by a 15-hp 3-phase motor. Push button table height adjustment. - Item ID-11066 - Michelle 800-315-9950 x606Third Man Inc. Pallet Nailing Unit - Third Man Pallet Nailing Unit, Model TMN-075, S/N PJ0075, Handles Up To 48 x48, Does 3 Or 4 Stringer Pallets. - Item ID-11890 - Michelle 800-315-9950 x606Third Man Nailer with Stacker - Third Man Nailer with Stacker - Item ID-11809 - Michelle 800-315-9950 x606Williams 200 H.P. Hammermill Grinder - This 200 H.P. hammermill was recently removed from a sawmill where it was being used to grind wood waste to boiler fuel for several large industrial customers. This grinder has a very large capacity and would work well in the grinding of whole pallets because it has a top opening size of 27” X 52”. This grinder is powered by a 200 H.P. electric motor that operates at 1200 RPM and uses 460 voltage for its power. The electric motor is direct coupled to the grinder through a shear coupler to prevent damage from being done to the grinder. This machine is equipped with a bar type screen that determines the size material the machine is going to produce. Of course this screen can be changed to achieve many different size materials being produced from the same machine. This machine comes with a size # 6 motor starter and 600 amp breaker which are enclosed in a large free standing electrical cabinet. This is a very nice clean unit and would work ideally for many grinding applications. - Item ID-12011 - Daren 800-315-9950 x603

PLANERSAmerican 30” single surfacer. - American # 444 . Thickness capacity appears to be 7”. Three knife head on ball bearings. Segmented chipbreaker and infeed rolls. (Sleeve brngs on feed rolls.) Chipbreaker bar lifts right out for ease of knife setting. Knives measure approx. 135 thou thick. 15 HP three phase on main shaft and feed rolls belt to this. Readily addaptable for line shaft


WOOD – $300/cord or More!Double or triple your profits by shrink wrapping wastewood - fore-wood with WOOD-PAKer! Attractive various size packages can be obtained with our high production, easily operated and affordable machines. Eight machines available. The ideal equipment for produc-ing square bundles-palletizable for ease in storage and transporting. Inquire for free details. Video and Package samples at nominal fee.

B & B Manufacturing

SHRINK WRAP FIREWOOD/WASTEWOOD

‘04 Valmet 425 EX-10 Harvester4,700 hrs., Valmet 360 Proc. HeadContact: Tom800.315.9950 Ext. 604

www.LBXonline.com

Timberwolf Pro-HD XL Inline Firewood ProcessorItem ID: 12013Contact: Michelle800.315.9950 Ext. 606

www.LBXonline.com

use. Well guarded. A nice unit. - Item ID-11784 - Daren 800-315-9950 x603Complete Planer Mill - Yates American A20, 8-knife, belt driven with top and bottom profile; 54” McDonough Resaw; heaby motorized conveyor chain; XL ripper; Goff cleat machine; 2 double end trimmers; DeWalt radial arm saw. Includes all motors and dust collection systems. - Item ID-10994 - Michelle 800-315-9950 x606Greenlee 30” double surfacer - This 30” straight knife double surfacer has 4 knife heads with a 5” cutting circle. It opens to 7-1/4”. There are four top and four bottom feed rolls. There is a jointer for the top head. I was told by a planer expert that it would make a good finish planer. - Item ID-11780 - Daren 800-315-9950 x603Newman 4 sided planer - This 6-3/4” x 16” capacity 4 sided planer has been updated with

separate motors for the feed, top head, bottom head, and both of the side heads. It has sat idle for some time but is restorable. I overhauled the side heads and they have been stored inside. This machine differs from most 500 models in that it has 9” feed rolls rather than 8”. - Item ID-11729 - Michelle 800-315-9950 x606Newman S682 two sided planer. 6”x30” capacity. 6 knife heads - 30” Width, 6” max. & 1/4” min. thickness cap., shortest stock 46” (not butted) 20” butted; manual thickness adjustment. Equipped with: 40 HP - 3,600 RPM Direct drive motor to top head, 20 HP - 3,600 RPM direct drive motor to bottom head, both heads with NEWMAN 6-knife straight cutterheads, 7” max. cutting circle. - Sectional top chipbreaker with 3” wide hardened steel sections, 1-1/2” max. travel. 10 HP Mechanical feed drive, variable feed speed from 50 - 150 FPM, feed system with (6) 8” dia. feed rolls, (2) top infeed rolls sectional with 2” wide segments allowing 5/16” independent yield and 1-1/2” yield of the entire roll, max. cut top 1-1/2” and 1/4” bottom. - Item ID-11747 - Michelle 800-315-9950 x606

Yates American planer, 18” model J18, 2-speeds, 3-phase, new knives, +/-.005 on the cut, ready to work! - Item ID-11860 - Daren 800-315-9950 x603Yates Model 277 30” x14” double surfacer - 40 HP top. 25 HP bottom. 6 knife heads. Opens to 14” thickness. - Item ID-11779 - Daren 800-315-9950 x603Yates-American A-62 4-sided planer - This machine has 12 knife main heads with a 15” wide cut. The side head shafts are 1-13/16”. - Item ID-11762 - Daren 800-315-9950 x603

PORTABLE SAWMILLBolter Mill - Bolter Mill 12’ capacity 60 hp - Item ID-11736 - Michelle 800-315-9950 x606Timber Harvester HD-30 - powered by a 25-hp Kohler gas engine. It is a 2005 year model with approximately 400 hours. Runs great and comes with 2 boxes of blades - Item ID-12009 - Michelle 800-315-9950 x606Timber Harvester Sawmill - 5600hrs runs and works great, cuts 30” wide and 21’long 30hp Deutz motor fully hydraulic mill - Item ID-11895 - Daren 800-315-9950 x603

RECYCLING EQUIPMENT

2002 Brush Bandit 250 - 12” capacity disc-style chipper with auto-feed Cat 115 horsepower engine, in 2006 engine got new assembly and doghouse, 137+/- hours on new engine, 1260+/- hours on frame, upper feed wheel hydraulic lift, work ready! - Item ID-11835 - Michelle 800-315-9950 x6062003 Morbark 7600 - 3200 hours on a Cummins 12-cylinder engine, 1000 horsepower, ran daily, magnetic end pulley, wireless remote, 5X5, 8X8 screens, Twin Disc clutch, tight clutch, new mill rods, balanced mill, new lights, 85%-95% tires, very good value for a horizontal grinder this size! - Item ID-11830 - Michelle 800-315-9950 x6061999 Duratech HD12, 12’ tub grinder - great running tub grinder with brand new mill, new clutch pak, new tub ring, only 100 hours on rebuilt Cat engine 460 hp, swing hammers, hydraulic tilt tub, 5 sets of screens included 1”, 2”, 3”, 4”, and composting screen, magnetic head pulley, 2 extra sets of hammers, includes regular tires and foam-filled tires for yard use - Item ID-11848 - Michelle 800-315-9950 x606


JOCKEY GRINDER OWNERS!!!

“EZ-SLIDE” TOOTH STOP & TOOTH REST

This Patented, Spring Loaded Design• Allows for EZ sliding of the grinding wheel to the tooth. • Eliminates the sticky divots of the old style wear plates.• Saves you time and money with better control of the sharpener and

more consistent sharpening of your saw teeth.

The high quality stainless steel wear plate contacts the tooth as the aluminum frame and grinder move to sharpen the tooth.

Call 1-800-582-0470 TODAY

Our sawyers say they will not go back to

the old style parts.

Joe NowakLumberjack HardwoodsMenominee, Michigan

This is one of the best innovations in our industry to

come along in years. Where was this 30 years ago?

Kevin Mueller Mueller Brothers TimberOld Monroe, Missouri

Gehrlinger - Powered by a perkins diesel and has power-shift transmission. Rated at 46,000 pounds and runs good. - Item ID-10781 - Michelle 800-315-9950 x6061992 Haines Bagger, single bagger, stationary, with large hopper, sealer, take-away belt, 8’ X 18” Ruff Top elevated conveyor, originally set up for bagging sand and gravel, owner used only a short while, and then it sat. always stored indoors, single phase electric see a similar model by Haines. Haines manufacturer still provides parts for this older unit. - Item ID-11826 - Michelle 800-315-9950 x606Powerscreen Mark II - Portable screening plant with conveyor. - Item ID-11585 - Michelle 800-315-9950 x606Remu MSU2-300-US Trommel

Screen - Powered by a Ford 5.95L, 6-cylinder tubo diesel engine, 9’X6’ trommel screen, tandem axle, 4 conveyors, rear conveyor is a pivoting stacking conveyor. 1991 year model. - Item ID-10998 - Michelle 800-315-9950 x606ReTech 622 Screener - 1994 year model, powered by John Deere diesel. Extra screens & brushes and in great shape. 1/2” and 3/8” screens. - Item ID-10762 - Michelle 800-315-9950 x6061990 Morbark 16 ChipHarvestor new Cat engine whole tree chipper with 16” diameter capcity, cab and grapple loader, grapple loader is in good condition, 1000 hours on new Cat engine, only 3500 original hours, new clutch, new belt, new bearings, needs some paint, some dents in the cage, but overall mechanically

sound whole tree chipper. - Item ID-11863 - Daren 800-315-9950 x6031991 Haybuster IG-8 tub grinder, 1100 hrs, 2” screens, john deere diesel engine, swing hammers have been replaced, discharge belt has been recently replaced, only used to regrind bark - Item ID-11864 - Daren 800-315-9950 x6031994 Duratech HD8 8’ tub grinder, has only 204 hours on it! John Deere turbo diesel with 131 horsepower, new under belt, new roller bearing, new hydraulic pump, and new exhaust. swinging hammers on mill, 2 sets of screens included (3” and 1 7/8”), 10’ discharge conveyor, good tires, 25/16” ball hitch on trailer. DURATECH name as the company is DURTACH INC. - Item ID-11861 - Daren 800-315-9950 x6031994 Haybuster HD-10 Tub

Grinder, Powered by a John Deere Diesel Engine, Hydraulic Driven Tub and Conveyors, 10’ tub size, Hour Meter Reads: 920 Hrs, S/N: 18-1-49-0312 - Item ID-11693 - Michelle 800-315-9950 x6061995 Diamond Z 936 Tub Grinder - Tub grinder with single axle. Powered by a Cat diesel engine. - Item ID-11882 - Michelle 800-315-9950 x6061995 MORBARK 1250, Fixed Hammers, Knuckle Boom, Cab, and 36” Tarantula Heavy Duty Grapple, Tripple Axle, Magnetized Pulley Conveyor, Cat 3412DITTA, 750HP Engine. 1st Hour Meter Replace:6425. 2nd Hour Meter Replaced: 634. - Item ID-11704 - Daren 800-315-9950 x6031995 WHO P12-56 Tub Grinder, Cat 500 hp, hyd raising tub, updated/new hammer mill, new tub floor,


Multitek Firewood ProcessorsIncrease Your Productivity and Profitability

Made in the U.S.A.

1996 Clement End Dump Trailer24’ x 96” Item ID: 11997Contact: Michelle800.315.9950 Ext. 606www.LBXonline.com

‘92 Ford L8000 w/1996 Series XL235E Log LdrItem ID: 12025Contact: Daren 800.315.9950 Ext. 603www.LBXonline.com

clean unit ready for work. - Item ID-11818 - Daren 800-315-9950 x6031996 Morbark 2400 Chipper, Twin Disc Clutch,New Paint and Decals,Panels in Great shape,Pintle Hitch,New Knives,12X16.5 Tires - Item ID-11879 - Daren 800-315-9950 x6031996 Vermeer TG400 Tub Grinder - Powered by a Cat 3406 400-hp diesel engine and has only 1432 hours. Has discharge conveyor. Well maintained. - Item ID-11486 - Michelle 800-315-9950 x6062000 Morbark 30/36 - Morbark 3036 New $30,000 upgrade done by factory including HD drum, new belts, bearings Hyd. pump. babbitt knives cat 3306 turbo engine with 335 HP new brakes, new paint and decals no leaks or drips never any trouble with engine. This 2001 is in great shape and ready to work!! - Item ID-11804 - Michelle 800-315-9950 x6062000 Morbark 3036 Whole Tree chipper - Loader, Joystick controls with A/C and heat. New drum and bearings. serial# is 4661100-3036 - Item ID-11363 - Daren 800-315-9950 x6032001 Morbark 3036 - Whole tree chipper, powered by a 325-hp Cat diesel engine; has self-loading grapple; one year old heavy duty drum and runs great. - Item ID-

11587 - Michelle 800-315-9950 x6062001 ROTOCHOPPER MC166, 3600 hours, Cat 3406 460 hp, includes coloring attachment - Item ID-11692 - Daren 800-315-9950 x6032003 Rotochopper CP118 Portable wood chip processor with coloring unit. This machine runs good but has an electric problem it keeps flipping the circuit breaker for the conveyor and auger Sold at this price As Is needing work to electric has extra screens, 2” screen. Will produce 35 - 40 yards per hour - Item ID-11973 - Daren 800-315-9950 x6032003 ROTOCHOPPER CP118, 80hp, 790 hours, CAT diesel engine, fixed hammers, one-pass re-grind & coloring system. - Item ID-11287 - Daren 800-315-9950 x6032004 BANDIT 3680 Beast Horizontal Grinder, approx. 4500 hrs., working Daily - Item ID-11819 - Daren 800-315-9950 x6032004 Bandit Beast - Powered by a V12 800-hp Cat diesel engine. 2300 hours. Photos coming soon. - Item ID-11233 - Michelle 800-315-9950 x6062005 Rayco RC12 Chipper - John Deere engine with 500 hours, ulsating down pressure, like new condition. Machine is capble of chipping 12” wood. This machine is all but brand new. Has been

kept in garage. - Item ID-11351 - Daren 800-315-9950 x6032006 Morbark 18 chipper - 180hp Cat, 160 hours, tandem axle. 10,000lbs, curbside jack, 65” x38” feed chute, 36” drum with controlable airflow, 48 gallon lockable fuel tank, manuals and paperwork included. - Item ID-11355 - Daren 800-315-9950 x603CBI Magnum Force 4800 - 2001 year model, 3000 hours, magnetic head pulley, heavy duty grate liner with cutting anvil, 3412E 1000-hp Cat engine with Flexx Aire

Fan. Solid steel rotor. Hammers, grate liner and discharge belt have been replaced and have less than 100 hours on them. - Item ID-10577 - Michelle 800-315-9950 x606Dura Tech HD-8 Tub Grinder - Haybuster tub grinder, 8’ opening on tub, 16” x 10’ discharge conveyor, trailer mounted, 215/75R17.5 tires, John Deere diesel engine 110-hp, 705 hours. New clutch, new hitch and new oil temperature guage. Maintenance done, changed out fuel and oil filters; changed the oil. - Item ID-11803 - Michelle 800-315-9950 x606Duratech HD-8 - This tubgrinder has an 8’ tub with a tub extension.


Carriage Linear & Set ShaftLewis Controls “Electronics for sawmills by sawmillers”

The Most Complete Line of Sawmill Machinery Since 1905!

Single Machine or Complete Turn-Key OperationMore Production & Profit is Only One Call Away

For Parts, Service & Sales

Call (423) 698-0284

VFD CONTROL

ALL SIZES OF MOTORS

MANUAL TRANSFER

SWITCH

MOTOR CON-TROL

STARTERS

DISCONNECTSWITCH

AUTOMATICREDUCED VOLTAGE

STARTER

COMBINATIONSTARTER

Reconditioned Electrical Equipment

Saves You Money, Big Money!

We Buy, Sell, or Rent— Used, Obsolete and Hard to Find Industrial Electrical Equipment

Many ItemsIn Stock Ready for

Immediate Shipment!

When you need it NOW—And at the BEST Price!

YOU NEED WEAVER ELECTRIC

CALL TODAY!Toll Free 800-257-0038

Ph: 303-288-0746 • Fax: 303-288-02186591 N. Washington, Denver, CO 80229

Web: www.weaverelec.comEmail: [email protected]

‘08 JD 843-J Feller Buncherw/FD-22 Hot Saw; 2,800 hrs., Great Condition.Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

‘08 Valmet 603 3-Wheeled Feller Buncher3,800 hrs., 18” Hot SawContact: Tom800.315.9950 Ext. 604

www.LBXonline.com

It has just over 700 hours. It is powered by a 125-hp John Deere diesel engine. It has new hammers. 1994 year model. Tub extension is 10’3” wide and bolted on, so it can easily be removed for shipping. - Item ID-10804 - Michelle 800-315-9950 x606Duratech HD8, tub grinder w/ coloring unit - Duratech HD8 Duratech / Haybuster HD8 tub grinder with coloring attachment, John Deere, 130 horsepower, 1100 hours, swing hammers, magnet on 5’ conveyor, variable speed tub with load sensor, 3 sets of screens, 3”, 2”, and 1.75”, 90’s model - Item ID-11867 - Daren 800-315-9950 x603Duratech IG-10 Tub Grinder - Powered by a 300-hp diesel engine. Has 3000 hours. Magnet on the discharge. New hammermill and new belts. 2” screens. - Item ID-11320 - Michelle 800-315-9950 x606Fecon 3250 Horizontal Grinder - 1995 year model, powered by a Cat 3306. Includes remote control. Has only 1000 hours. - Item ID-10798 - Michelle 800-315-9950 x606Fecon MZA 2500 - 2004 year model with 400 hours. Cat diesel engine, 250-hp. S/N 2S000692164 - Item ID-10799 - Michelle 800-315-9950 x606

Gyro Trac GT25 - Machine has 1278 hours. - Item ID-11801 - Michelle 800-315-9950 x606Haybuster H1000 PTO Tub Grinder - Tub has been re-inforced. Belts are almost new. Mid 80’s model. Has either 2 or 3” screen. Is 10’ wide at top of flair. TRANSPORT DIMENSIONS Width 10 ft. 3 in. (3.12 m) Length 21 ft. 4 in. (6.50 m) Height 10 ft. 2 in. (3.10 m) - Item ID-11554 - Michelle 800-315-9950 x606Haybuster IG-8 Tub Grinder - Powered by a 110-hp John Deere diesel engine. Has only 1034 hours. Includes a 1” and 1-1/2” screen. 8’ discharge conveyor. - Item ID-11426 - Michelle 800-315-9950 x6061993 Morbark 1050 Tub Grinder, 4100 hours on a 3406 CAT diesel engine, Magnetic head pulley, wood chip coloring attachment, and self loader (grapple), 6 sets of screens (4 - 4x6 inch screens, 1 - 2 inch screen, and 1 - 1 inch screen), Extra hammers, tips, nuts and bolts, wheel base, and tons of other small parts, Spare (new) hammermill, Recently changed clutch, hydraulic motors and hydraulic pump, The unit can easily grind over 100 cubic yards an hour and has a variable speed

control. - Item ID-11312 - Daren 800-315-9950 x603Morbark 1200 Tub Grinder - 1993 year model; rebuilt by Morbark in 1999. Equipped with grapple, 650-hp Cat Diesel engine, rebuilt clutch, rebuilt hammermill, oversized hammermill and wider-longer conveyor. - Item ID-10773 - Michelle 800-315-9950 x606Morbark 1200 Tub Grinder - Powered by a Cat 3412 650-hp diesel motor. Includes a Morlift 350 grapple; lots of new parts;

freshly painted; air compressor; heat and A/C in the cab; magnetic head pulley. - Item ID-11660 - Michelle 800-315-9950 x606Morbark 2400XL 20” Drum Chipper with Grapple - 2003 Morbark Model 2400XL Hurricane, 20” capacity hydraulically feed drum chipper with a Morlift 150 grapple, Cummins 260 HP turbo diesel engine, 2655 hours, hydraulic down riggers, tung jack and chute turner, dual feed rollers. - Item ID-11678 - Daren 800-315-9950 x603


Why?Why?We use only the highest quality nickel alloy steel • NEW• state of the art CNC milling centers for perfect pocket geometry

100 + years of combined hammering and • manufacturing experience

Proudly made in the • USAStock to 10 days on standard sizes• Nations largest distributor/manufacturer of saws • and knives

www.usblades.net

CALL 800-862-4544Locations in

Hampden, ME Meridian, MS Florence, SC West Monroe, LA

Morbark 2600 Portable Grinder - 2007 Year model. 321 hours. Portable wood hog. Powered by a 250-hp Cat diesel engine. Can choose from a 3” x5” rectangular screen or a 4” octagon screen. This machine is $220,000.00 new. Does have full warranty - Item ID-10743 - Michelle 800-315-9950 x606Morbark 290 Wood Chipper- everything done and ready for spring , great machine for landscaper or a second back up machine for a small tree company, chipper has always started and chipped, extra sharpened blades, it has a cummins diesel engine, 88 horse power, has new tires and brakes - Item ID-11897 - Daren 800-315-9950 x603Morbark N-viro Mulch 2000 - 1994 year model. Powered by a 21-hp Kuboto Diesel. Has a 5 yard infeed hopper, mixing screw and colorant pump. 35’ auger, new motor on color pump and can process around 30 yards per hour. - Item ID-10551 - Michelle 800-315-9950 x606UNIVERSAL REFINER PDR96 SUPER CONTENDER - 450 hp cummins, rebuilt engine & many wear parts replaced within 1000 hrs, machine has 6770 hrs on it. Discharge is a 20’ blower pipe. sn#PDR-96-12 - Item ID-11440 - Daren 800-315-9950 x603Vermeer 400L Tub Grinder - This grinder has a cab, grapple and magnetic head pulley. It is powered by a 400-hp Cat diesel engine. Unit is on a triple axle trailer and has only 2300 hours. Also a folding discharge conveyor. - Item ID-10539 - Michelle 800.315.9950 x606Vermeer Stump Grinder - Model 630A hydraulic stump grinder. - Item ID-11494 - Michelle 800-315-9950 x606WHO P-12 Tub Grinder - 1989 year model with 3486 hours. - Item ID-11873 - Michelle 800-315-9950 x606

RESAWS42” Mcdonough Band Resaw - Verticle special “V” shape infeed allows cutting 4 by 4 on a diagnal. - Item ID-10477 - Michelle 800.315.9950 x606Brewco B-1600 BRAND NEW!!! - BRAND NEW!!! Brewco B-1600 has never been plugged in. Owner purchased a much larger machine - Item ID-11249 - Michelle 800-315-9950 x606Kent Resaw - 1-1/4” bands, variable speed gear box. Extra wheels and 1/2 box of bands. 10’ return. 2001 year model. Extended Return Belt and a Electric Band Sharpener - Item ID-10897 - Michelle 800-315-9950 x606Morgan band resaw - Morgan band resaw has automatic return belt, 220/440, 3-phase, early 90’s model - Item ID-11866 - Daren 800-315-9950 x603Morgan Four-Head Resaw - Morgan Four Head Resaw - Item ID-11810 - Michelle 800-315-9950 x606

ROLLING STOCK1983 Mack Cruiseliner w/tail mount 1986 Hood 7000 Series loader - Mack E6-350, 800k+ miles, 9 speed Fuller trans, 20k lb.front axle w/ floats, 44k lb. rears. New in last 2 years - windshield, paint, front rims, tires, batteries, reman transmission, conversion to S-cam brake assemblies on front axle, rear brake shoes, air compressor, air dryer, rear suspension w/ trunion, buckets, bushings, truss rods and frame rail, front grille, cab jack pump, recent clutch adjustment, fluids changed and more. Rubber at 75 percent, some minor leaks. Parts truck available. Hood 7000 loader w/ 22-foot boom, butt grapple and 11k# lift capacity @ 10 feet. New in last 2 years - main boom cylinder, left grapple cylinder, rod ends in right grapple and jib boom cylinders, all other cylinders repacked and/or rebuilt as needed, external filter assembly, valve sections and spools, most swivels and hard/soft lines. Some minor leaks. will take offers! - Item ID-11796 - Michelle 800-315-9950 x606

SAW GRINDERS & STRETCHERSArmstrong Band grinder. - Nice #4 L.H. Armstrong Band grinder. Serial RB 6642. Air back feed. 3 Stands. Updates. Cams: 50E 4U W, 50E 4U F - Item ID-11777 - Daren 800-315-9950 x603

SAWMILL2005 Cooks Acu-track AC 36 Heavy Duty, Machine has 1300 hrs on it, 51 HP Perkins Diesel. Runs the band saw which has a inch and half wide band on it, 12HP Kochler Gas Motor. Powers the


1998 Prentice 310EItem ID: 12033Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

2003 CAT 525B Grapple SkidderItem ID: 11986Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

hydrolic controls, it comes with a De-barker/De-Mudder to save wear and tear on blades and keep them sharp, it has self log loader, and it comes with Extra Blades. Fully maintained, Oil is changed every 150 hrs. It will cut aprox on average 3,000 board foot a day. - Item ID-11902 - Daren 800-315-9950 x6032007 Cooks Portable Sawmill with portable edger - 2007 Cooks Portable Sawmill with portable edger, 301 hours, tires are in good condition and ready to work, - Item ID-12016 - Michelle 800-315-9950 x60672” CSI R72 Circle Saw - Year model 2004, hydraulic. 20’ deck. Sold without the blade. New blade is additional $3500.00. Was over $40,000 new, 2 years ago. machine needs a new blade, 1500 hrs, it was used to cut logs - Item ID-10767 - Michelle 800-315-9950 x606Armstrong #4 - Bandsaw Sharperner - complete sharpener for left hand blades from 6” to 14” wide. Comes with a complete full set of saw stands, back feed arm, and filing clamp. Features “Sidewinder” spring loaded

feed finger, carbide face plate, plastic cams, and Allen Bradley frequency drive for variable speed on the grinding wheel. Will grind 4” or narrower bands with slight modification. - Item ID-11618 - Michelle 800-315-9950 x606Baker 3630E Band Sawmill - 2001 year model. 20’ Stationary unit powered by a 30-hp electric motor, 7.5-hp hydraulic unit. Includes electric set works and the control & hook-up for a log deck. Has been completely shop checked. Can take up to a 36” diameter log. - Item ID-10566 - Michelle 800-315-9950 x606Frick Slab dump - Overall footprint: 58” x 18’-3”. Plan view sketch available. This is a heavy duty well built unit. - Item ID-11786 - Daren 800-315-9950 x603Holtec F/SHK Package Saw - 16’ fixed lumber frame. Hydraulic bar system, 15-hp, 460v, 3 phase, cutting station moves on track with rack & pinion wheel, includes parts manual, log foundation plans, spare bar and 3 carbide chains. - Item ID-11472 - Michelle 800-315-9950 x606KM-16 Trimsaw - Trimsaw - Item

ID-11670 - Michelle 800-315-9950 x606Log decks - The bright colored long deck is a 30’ 2 strand with stop and loader and hydraulic drive. Strand spacing is 48”. Deck is based on 5x10 tube frame. Underneath is a 14’ 2 strand deck with 80” strand spacing. There is a gear box but no motor. Could be

hydraulic or electric. can be solld separt MAKE OFFER! - Item ID-11731 - Michelle 800-315-9950 x606Lumber Transfer - Lumber transfer 16 ft 4 strand 50 ft 4 strand Green Chain - Item ID-11669 - Michelle 800-315-9950 x606Meadows Portable Mill - 56” sawblade, setworks, new wheels on carriage, includes 4 extra blades (2 need work). Very good condition. $6,000 worth of work to setworks and carriage. Pulley


LEApril2009:Lumberman's Exchange 3/18/09 2:16 PM Page 1

system. - Item ID-10895 - Michelle 800-315-9950 x606SB-420 Milling Machine for Round Log Home Timbers - This is a new machine. - Item ID-11658 - Daren 800-315-9950 x603

SHAVING EQUIPMENT2006 SALSCO 30 Shaving Mill- Hour meter not working properly, 83 hp cat, Box is 102” x 30”, has a blower and all knives in blower are in good shape - Item ID-11977 - Daren 800-315-9950 x6032007 SALSCO 30 Shaving Mill with Blower, 1686 hours, 83 hp Cat Engine, Box is 120” x 30” - Item ID-11978 - Daren 800-315-9950 x603Shaving Mill - Shop built, set up 1 year ago. Box is 48” W x 5-1/2’L. All electric, powered a 3-phase electric motor with converter. Comes with all electrical boxes. 2 heads with 3 knives per head. Powered by a 60-hp motor. Includes deck to feed and discharge conveyor. Processes 2 truck loads per hour. Runs about $150 per month in electric use. - Item ID-11975 - Michelle 800-315-9950 x606

Dawson 2-Saw Air Trim Saw - Trimmer cuts cants with operator sliding material left or right on rollers. It has manual stops, saws are foot operated. Includes a waste belt conveyor below. - Item ID-10712 - Michelle 800-315-9950 x606Diehl air operated crosscut saw. - Diehl air operated crosscut saw. Suitable for behind a roller line. Has an 18” saw. - Item ID-11740 - Michelle 800-315-9950 x606Mereen-Johnson 431-DC Gang Rip Saw with Laser - Model 431-DC, S/N MJ-4728, 31 Capacity, Comes With Mereen-Johnson Laser Set-Up Stand, S/N LZ-31-8-F, Model MJ-7121 With Operations Manual - Item ID-11995 - Michelle 800-315-9950 x606Newman Drop Saw Trimmer - Has 7 adjustable saws. Has built in scrap conveyor. Includes all motor and starters. - Item ID-10714 - Michelle 800-315-9950 x606Slab Saw - New Slab Saw by Precision Mills. 1 blade. - Item ID-11643 - Michelle 800-315-9950 x606

TRANSFER DECKS3 Channel Live Deck - About 25’ long - Item ID-10896 - Michelle 800-315-9950 x606

TRIMMERSDawson Brothers Double End Trimmer - Comes with gas and electric motors. 30’ waste conveyor; air hoses and regulators included. - Item ID-10748 - Michelle 800-315-9950 x606

1985 Wilson 20-ton Tilt Deck Trailer - excellent deck, 90% tires, air brakes, - Item ID-11591 - Daren 800-315-9950 x6031988 Mack RW713 Day Cab Log Truck - Mack E6-350, 350 HP, 15 Speed Eaton Fuller Transmission, Spring Ride, GVWR: 52,000, Odometer Reads: 612,933, VIN: 1M2AY10Y0JM003060 - Item ID-12000 - Michelle 800-315-9950 x6061989 International Truck with Barko Loader - Model F-2574. 228” wheelbase, 312,000 miles, 100,000 on new Cummins 400 diesel engine; tires are 70%; truck has fresh paint. No leaks, clean and dry 1998 Barko Loader. - Item ID-11655 - Michelle 800-315-9950 x6061989 Kenworth T800 Log Truck w/Log Trailer - Cat 3406B Diesel Engine, Fuller RT0187 18-Speed Transmission, 425 Horsepower, 80,000 GVW, 230 Wheelbase, Odometer Reads: 946,784, VIN: 1XKDDB9X6KS536125, with 1984 White Log Trailer, 26’ Length, VIN: SA100WHITLOG84529


HEAVY DUTY FORKSAT BIG SAVINGS

■

■

■ LET US QUOTE YOUR

BAY EQUIPMENT CO. / (616) 392-1811

Above forks have capacities from 12,000 lbs. to 30,000 lbs. per pair.

Also, 4”, 5”, 6” thick forks to 168” long.

‘00 Daewoow/Denharco DM3500 Stroke Delimber

Item ID: 12026Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

2001 Fastline Gator 128 Band ResawItem ID: 12023Contact: Michelle 800.315.9950 Ext. 606

www.LBXonline.com

- Item ID-12001 - Michelle 800-315-9950 x6061996 Clement End Dump Trailer, 24FT X 96IN - Tandem Axle, Spring Suspension, Air Brakes, Steel Wheels, GVW 77120, - Item ID-11997 - Michelle 800-315-9950 x6061996 Freightliner w/Prentice 120C Knuckleboom - Knuckleboom mounted behind the cab, Cat 10 speed - Item ID-11593 - Michelle 800-315-9950 x6061996 Peterbilt Model 377 - 1996 peterbilt tamdan, 22 foot silage bed with end dump and hyd. gate,roll over tarp, would make a very good grain truck. 9 speed trans. 80% rubber, 475 cat engine, good truck ready to go to work. just put new shocks on front. bed sides are 60”. - Item ID-11597 - Michelle 800-315-9950 x6061997 Mack CH613 w/1997 Sta-Lite Log Loader Trailer - E7 Mack Engine 454-hp; 354,000 miles; 18-speed transmission; 12,000# front axles; 40,000# rear axles; Suspension Air Ride; 80% air brakes, PS, AC, airslide 5th, cruise control, hyd wet kit for log loader, alum headache rack, dual exhaust, includes 1997 Sta-Lite 45 ft x 96” log loader trailer - Item ID-11588 - Daren 800-315-9950 x6031998 Cargo Walking Floor Trailer, 45FT x 102IN - Tandem Axle, GVW:

68,000, Air Ride Suspension, Air Brakes, Aluminum Wheels, VIN: 1C9WX4526WC450129 - Item ID-11998 - Michelle 800-315-9950 x6061998 MACK CL713 - 1998 Mack w/ a 1998 Serco Loader, 25’ Boom, 1/4 Butt Grapple, Pintle Hitch, Tractor Package, Power Divider, Heated Mirrors, AC, Cruise Control. Front axle 20,000, Rears 44,000, Camelback suspension, 135,155 miles, 460 hp, 18 Spd transmission. - Item ID-11529 - Daren 800-315-9950 x6031999 Mack CL 700 Log/Loader Truck w/Tri axle Rosa Pup E-7 Mack @ 460 hp. , 8LL trans., cruise, Serco 8000 Loader, dual stack, tool box, alumin fuel tank, just had $11,000 in motor, $4,000 in trans and $6,000 in front/rear tandems 1999 Rosa Crib Trailer 3 axle, a/ride, 22’ deck, 22.5 tires, aluminum wheels, hub piloted - Item ID-11530 - Daren 800-315-9950 x6032002 Kenworth T800 Log Truck and Trailer - Cummins ISX, 475 HP, 18 Speed Eaton Fuller Transmission, Lift Axle, Odometer Reads: 522,028, VIN: 1NKDX4EX52S894416 with 2002 Whit-Log NBSE100 Log Trailer, GVWR: 34,000, VIN: 1W90111052SW02033 - Item ID-11999 - Michelle 800-315-9950 x606

2002 MACK GRANITE CV713, 464hp, 664,500 miles, 18 spd, air ride suspension, 2002 SERCO 7500 LOADER AND 1996 ROSA PUP TIRES AND BRAKES at 80% - Item ID-11700 - Daren 800-315-9950 x6032003 Mack CH613 - With E7 425 Mack engine, 9 speed, wet kit, air slide fifth wheel, air ride suspension, air conditioning. 210,000 miles. Good tires. - Item ID-11087 - Michelle 800-315-9950 x6062003 Volvo Model 660 - This truck has been converted to a Toter Truck for pulling a 38 ft fifth wheel, has a 475 hp isx cummins deisel with 10 speed automatic trans. bunk bed and referigator,air ride fifth wheel, and much. much. more. - Item ID-11596 - Michelle 800-315-9950 x60625’ Deck trailer with dove tail - 25’ deck trailer with dove tail. Photos coming soon. Is a 2007. - Item ID-11676 - Michelle 800-315-9950 x606Great Lake Log Jammer - 1983 year. LOG JAMMER IS A PRENTICE S/N# 90P22414 MODEL# F90, STICK ON JAMMER 20’ - Item ID-11592 - Daren 800-315-9950 x603Hobbs End Dump - 1975 year model. 26 feet long, 5.5 foot high sides. Cylinder weeps and tires are not good. - Item ID-11085 - Michelle 800-315-9950 x606

Johnson Short Wood Pup Trailer - 2 short wood pup trailers; tire size 11R 22.5; good condition; price is $6,000 each. - Item ID-11657 - Daren 800-315-9950 x603Kent Pole Trailer - 1990 year model. - Item ID-11855 - Michelle 800-315-9950 x606Kenworth W900B Logging Truck - 2000 year model truck powered by a Cat 3406E, 550-hp. 18 speed, 460,000 miles, 430 ratio, Henrickson HN suspension, dual exhaust, dual air cleaners. Truck drives great. Also has a 2004 Serco 8500 Log Loader with cooler and extenda boom mounted behind the cab. 22’ log body. - Item ID-11478 - Michelle 800-315-9950 x606Nabors Pole Trailer - 1987 year model. Truck not included with trailer. - Item ID-11854 - Michelle 800-315-9950 x606Pup Trailer - 3 axle load hog pup trailer. Rebuilt in 2005. - Item ID-11416 - Michelle 800-315-9950 x606Wisconsin Tiltbed Trailer - 1973 year model. Two axle, fifth wheel pull, ex-forest service. Has good tires. - Item ID-11084 - Michelle 800-315-9950 x606

Why Is Rotochopper So Special???

Why is it so hard to find a used Rotochopper? Why are our customers so loyal?

Intelligent Design

Technologically advanced grinders that make precisely the right particle size for biomass fuel, landscape mulch, animal bedding, wood flour, wood pellets, gasification, cellulosic ethanol, etc.

Thrifty, energy efficient grinders built for the 21st century and backed up with . . . World class factory service and support.

Give us a call and let a Rotochopper save YOUR world by grinding YOUR products . . . .

“Perfect In One Pass” .

217 West Street St. Martin, MN 56376

6084523651 3205483586

http://www.rotochopper.com [email protected]

Grinding Ag Biomass Grinding Forestry Biomass

Electric Diesel



Intelligent Design






6084523651 3205483586



Electric Diesel



Intelligent Design






6084523651 3205483586



Electric Diesel

THE LUMBERMAN’S EXCHANGE

Post Office Box 1916Columbia, Tennessee 38402

PRSRT STD.U.S. Postage

PAIDPermit No. 212

Pulaski, TN

lbxonline presents the lumberman's exchange magazine

Documents