LCC Pump - Rubber

LCC-R Slurry Pumps are heavy-duty slurry pumps for abrasive or abrasive-corrosive service. These pumps are available in split-case,elastomer-lined construction.

LCC Rubber-Lined Series (LCC-R)The LCC Rubber-Lined Series features a split-casing design with molded, replaceable rubber liners. The molded liner may be specifiedin a variety of natural and synthetic rubbers. Natural gum rubber is standard. The liners offer a shore-A hardness of 30-40 with a tensilestrength minimum of 2,700 psi (18 n/mm2).

The liners are vulcanized to metal backing plates and captured at the split casing, suction discharge flanges and stuffing box area tomaintain hydraulic and hydrostatic integrity.

LCC-R slurry pumps feature:

Double-wall construction with an outer ductile-iron casing and inner molded-rubber liners.Three-vane impellers cast of hard metal or polyurethane.

LCC-R slurry pumps are suitable for moderate discharge head, fine particles and highly corrosive slurries.

Results 1 - 7 of 7

Item # Pump Pump Shaft Diameter Motor Hp Motor Rpm Flow Motor Mount TypeLCC-RH 50-230-2 50-230 (2x3-9) 50 mm 15 hp 1800 rpm 200 gpm Hinged offset

LCC-RH 80-300-2 80-300 (3x4-12) 50 mm 30 hp 1800 rpm 500 gpm Hinged offset

LCC-RH 100-400-2 100-400 (4x6-16) 50 mm 50 hp 1800 rpm 900 gpm Hinged offset

LCC-RH 150-500-3 150-500 (6x8-20) 70 mm 100 hp 1800 rpm 1800 gpm Hinged offset

LCC-RH 200-610-4 200-610 (8x10-24) 100 mm 150 hp 1800 rpm 3000 gpm Hinged offset

LCC-RH 250-660-4 250-660 (10x12-26) 100 mm 250 hp 1200 rpm 5000 gpm Hinged offset

LCC-RH 300-710-4 300-710 (12x14-28) 100 mm 250 hp 1200 rpm 8000 gpm Hinged offset Results 1 - 7 of 7

GIW Industries, Inc.5000 Wrightsboro Rd. Grovetown, GA 30813 Phone: 706-863-1011 • Fax: 706-860-5897 E-Mail: marketing@giwindustries.com • Web site: www.giwindustries.com

11/13/2015 | Page 1 of 1