Organized by ALLBIM.net & “Anton Șesan” Academic Society for Construction in partnership with Faculty of Civil Engineering and Building Services & Faculty of Architecture - “Gheorghe Asachi” Technical University of IASI, Romania

The BIM-iss’ main objective is to prepare students for real life projects and challenges. The request for the BIM software solutions has increased around the world.

The aim is to offer you a comprehensive training to successfully face any architectural/engineering chal-lenge. Beside software usage instructions, the trainers will share valuable tips from their experience in the construction industry.

The course will be conducted by ALLBIM.net trainers and by professors from the Faculty of Civil Engi-neering and Building Services from Iasi.

Target audience:• architecture and engineer undergraduate students• graduate students• structural engineers• building services engineers

Location:“Gheorghe Asachi” Technical University of Iasi, Romania, Faculty of Civil Engineering and Building Servic-es in the ALLBIM.net Laboratory

Topics:• structural analysis by FEM• structural elements (beam, column, plate, wall, shell)• supports and loads• structural model of reinforced-concrete and steel• stability analysis• dynamic (earthquake load) analysis• design of reinforced concrete structure• design of steel structure• building services: Ventilation, Heating, Sanitation, Electrics• project / BIM management

LEARN HOW TO BUILD THE FUTURE2nd edition BIM-iss 2019

BIM - International Summer School2019, June 24th - July 5th - Iasi, Romania

powered by e-DISTI

powered by e-DISTI

Nowadays, building requirements are becoming increasingly complex and have to meet higher stand-ards. This leads to the necessity of learning BIM and AEC planning methods and the appropriate soft-ware, for both engineers and architects. The advantages of working in a 3D environment, allows a good correlation between multiple disciplines, which is essential to control clashes, quantities and precise execution.

The BIM-iss’ main objective is to prepare students for real life projects and challenges. The request for the BIM software solutions has increased around the world.

The aim is to offer you a proper training that will make you ready for the real-world challenges that any engineering or architecture office is facing daily. The training will not only limit to software usage, but also engineering knowledge will be shared.

The BIM International Summer School targets mainly architecture and engineering undergraduate stu-dents. During the two weeks of the summer school, common lectures will be held in order to understand the importance of working as a team (architect, civil engineer and building services engineer). Also, separate classes will be held for each topic. At the end of the summer school, students will be divided into small groups and a tutor will be assigned to each team to oversee a project. The most interesting projects will be selected and registered in the BIM Challenge student competition.

Emphasis is on one hand on how to use BIM Software and on the other hand, how to correlate practical skills with theoretical knowledge gained in university - Structural Statics & Dynamics, Reinforced Con-crete and Steel for civil engineers; minimal construction theoretical elements for the architecture stu-dents.

ABOUT

THE TEAM

Rareș Laurenţiu OpreaTehnic Consultant ALLBIM.netSpeciality: Architecture and Urban Planning

Studies: - bachelor degree: UAUIM-FU-Urban Plan-ning and Management 2011-2015- master degree: UAUIM-FU-Urban Mobility 2015-2017

Allplan Trainer from 2015 to present - Implementation of BIM workflow / Con-sulting and training for client projects

Ciprian PopaTehnic Consultant ALLBIM.netSpeciality: Structural Engineer

Studies: - bachelor degree: FCCIA, UTCB 2008-2012- master degree: PCCIZS, UTCB 2012-2014- PdD: FCCIA, UTCB from 2014 to present

International Trainer Allplan from 2011 to presentImplementation of BIM workflow / Consult-ing and training for client projects

George-Alexandru Costilă- SarchizTehnic Consultant ALLBIM.netSpeciality: CADICS - Road Design

Studies: - bachelor degree: CFDP, UTCB, 2014-2018 - master: IIT ,UTCB, 2018-2020

International Trainer Allplan from 2017 to present Implementation of BIM workflow / Consult-ing and training for client projects

Radana SteinbachConsultant ALLBIM.netSpeciality: Structural Engineer

Studies: - bachelor degree: ICE, TUIASI 2013-2017 - master degree: MPT, UAUIM from 2017 to present

International Trainer Allplan from 2016 to presentAllplan Educational Consultant

Mihail StancuTehnic Consultant ALLBIM.netSpeciality: AX3000 - Building Services / Energy performance certificate

Studies: - bachelor degree: FII, UTCB, 2013-2018

International Trainer Allplan from 2011 to presentImplementation of BIM workflow / Consulting and training for client projects

Ioana Olteanu-Donţovsenior lecturer, PhD TUIASISpeciality: Structural Engineer

Studies: - bachelor degree: ICE, TUIASI 2003-2008 - master degree: RCSC, TUIASI 2008-2009- PhD in civil engineering: TUIASI, 2011

Area of Interest: Numerical models, build-ing rehabilitation, FEM and BIM software

powered by e-DISTI

Course Documentation

A manuscript with all the examples will be given to the students and some of the main commands used to design and analyse the considered structures.

COURSES-PROGRAM

RequirementsIt is highly recommended for the civil engineer applicants to have basic knowledge of Strength of Materi-als and Structural Analysis (Structural Statics) or Building Services Systems.

However, no restrictions exist for students studying architecture.

Applicants are asked to bring their own laptops. If this is not possible, we offer a total number of 15 PC on which the Allplan and SCIA software are installed.

All international students are required to have health and travel insurance from their home country prior to their arrival in Romania. This type of insurance has to be valid in case any health services will need to be used while staying in Romania. For students coming from the EU countries their EU health insurance card is valid under the stated terms and conditions. Course Fee For Slovenian students registered via allbim.si fee is covered by e-DISTI and other sponsors.

Application processTo apply for BIM-iss2019, please use online registration form (click here). Registrations are open until 8th of June 2019.

After submitting your registration, you will receive a confirmation email from our coordinators regarding your registration.

Important dates BIM-iss 2019:Registration deadline: 8th of JuneCheck-in: 23st of JuneSchool start: 24th of JuneSchool end: 5th of July

For Slovenian students registered via allbim.si accommodation is covered by e-DISTI and other sponsors.We offer you the possibility to stay in Tudor Vladimirescu student campus which is close to a shopping centre at a distance of 20 minute walk from the course area.

A 20-minute walk distance is between the accommodation and the hosting faculty (you can check the map here).Accommodation does not include breakfast. Accommodation options are: shared twin room or single room. In case of shared twin room, applicants can choose flat mate or flat mate will be randomly as-signed. Optionally, students can be accompanied by one other person, who isn’t taking any classes at BIM-iss 2019.

ADMISSION & FEE

ACCOMMODATION

powered by e-DISTI

After the courses, every evening between 19:00 and 22:30 will be team building activities organized with the support of ASAFCI Students Association.

At the end of the first week, on Saturday, a cultural tour of Iasi will be held, and Sunday will be team work training and games in open air.

SOCIAL LIFE

powered by e-DISTI