lecture 1 .introduction , course over view mls level 7
TRANSCRIPT
![Page 1: Lecture 1 .introduction , course over view MLS level 7](https://reader030.vdocument.in/reader030/viewer/2022032618/55b794efbb61eb5e758b465f/html5/thumbnails/1.jpg)
INTRODUCTION ,COURSE OVER VIEW
MLS Level 7
Ms.Elham Ali Saad
![Page 2: Lecture 1 .introduction , course over view MLS level 7](https://reader030.vdocument.in/reader030/viewer/2022032618/55b794efbb61eb5e758b465f/html5/thumbnails/2.jpg)
Objectives • Discuss different type of patient’s sample
• Define&Explain substance of clinical interest in many different
situation
• List Component of each test ?
• Compare between different Types of results obtained in the
laboratories
• Compare between different Types of tests in clinical laboratories?
• Describe different Types of equipment & instruments are used in
clinical laboratories
• Discuss Important consideration in using tests, equipment's &
instruments
![Page 3: Lecture 1 .introduction , course over view MLS level 7](https://reader030.vdocument.in/reader030/viewer/2022032618/55b794efbb61eb5e758b465f/html5/thumbnails/3.jpg)
Function of the clinical lab
• Carry out analysis and investigations on patient’s
samples upon to request of the doctor to obtain
meaningful and timely results which will help the doctor
in the proper diagnosis , treatment and management of
the patient condition .
![Page 4: Lecture 1 .introduction , course over view MLS level 7](https://reader030.vdocument.in/reader030/viewer/2022032618/55b794efbb61eb5e758b465f/html5/thumbnails/4.jpg)
• The patient sample can be any type of
material obtained from the patient
which include;
-Whole blood -plasma -serum
-CSF -synovial fluid
-Amniotic fluid -saliva -pericardial fluid
-sweat -sputum -plural fluid
-peritoneal fluid -semen -body swabs
-urine -Body tissues (biopsies and
needle aspirations)
![Page 5: Lecture 1 .introduction , course over view MLS level 7](https://reader030.vdocument.in/reader030/viewer/2022032618/55b794efbb61eb5e758b465f/html5/thumbnails/5.jpg)
• Substances of clinical interest are those which are
affected directly or indirectly by the disease.
• The effect of disease on such substances can be
increase , decrease or presence of the substance
• Components of tests:
patients sample+ specific reagents+ means of identification
![Page 6: Lecture 1 .introduction , course over view MLS level 7](https://reader030.vdocument.in/reader030/viewer/2022032618/55b794efbb61eb5e758b465f/html5/thumbnails/6.jpg)
• Substances of clinical interest that may be increased
or decreased due to disease include;
-RBC -WBC -platelets -Hb -Hct -PT
-PTT -Na -K -Cl -Ca -Mg
-PO2 -PCO2 -glucose -protein -albumin
-γ-globulin (IgG , IgM , IgA)
-Enzymes (ALP , AST , ALT , GGT….)
-Ammonia -urea -creatinine -cholesterol -TG
-Hormones (cortisol , aldosterone , GH ,T3 , T4 , PTH….)
![Page 7: Lecture 1 .introduction , course over view MLS level 7](https://reader030.vdocument.in/reader030/viewer/2022032618/55b794efbb61eb5e758b465f/html5/thumbnails/7.jpg)
• Substances of clinical interest that their presence
may indicate the presence of disease include;
-Bacteria -Parasites -Viruses
-Tumor Markers (AFP , CEA , PSA…)
-Abnormal cells or tissues
![Page 8: Lecture 1 .introduction , course over view MLS level 7](https://reader030.vdocument.in/reader030/viewer/2022032618/55b794efbb61eb5e758b465f/html5/thumbnails/8.jpg)
• Reagents of the test include:
-Diluent (H2o , 0.9%NaCl , other solutions)
-Solvents (ethanol, acetone, iso-butanol,
petroleum ether , other organic and aqueous
solvents)
-Dyes (giemsa stain, wright stain, BCG,
hemotoxylin, gram stain , malachite green…)
-Buffer : are used when the reaction required
specific pH (acidic , neutral or alkaline pH)
![Page 9: Lecture 1 .introduction , course over view MLS level 7](https://reader030.vdocument.in/reader030/viewer/2022032618/55b794efbb61eb5e758b465f/html5/thumbnails/9.jpg)
-Catalysts :
Used to lower the energy requirement for the progress of
the reaction and speed up the reaction
It can be chemicals or substances such as : (Mg, Ag, Urea ,
Caffeine)
They can be also biological (i.e. enzymes) such as
(dehydrogenases , oxidases , reducates)
![Page 10: Lecture 1 .introduction , course over view MLS level 7](https://reader030.vdocument.in/reader030/viewer/2022032618/55b794efbb61eb5e758b465f/html5/thumbnails/10.jpg)
-Reaction solution:
Are chemicals which are prepared at specified
concentration with specific procedure.
They could be just one single compound (AgCl ,HClO4
, H2O2)
In many cases , the reaction solutions involve two or
more compounds which are added in one step (e.g.:
biuret reagent (protein) , jaffe-reagent (creatinine)
![Page 11: Lecture 1 .introduction , course over view MLS level 7](https://reader030.vdocument.in/reader030/viewer/2022032618/55b794efbb61eb5e758b465f/html5/thumbnails/11.jpg)
Types of results obtained in the laboratories
![Page 12: Lecture 1 .introduction , course over view MLS level 7](https://reader030.vdocument.in/reader030/viewer/2022032618/55b794efbb61eb5e758b465f/html5/thumbnails/12.jpg)
Types of tests1- Screening tests:
Characteristic Simple test
Cheap to perform
involve 1 single step;(mixing 1 drop of
sample + 1 drop of reagent = formation of
product by visual means (naked ye or light
microscope).
Aim of this type
applied to screen for the presence or
absence of specific disease or disorder
Place to performed
outside the lab or hospital
![Page 13: Lecture 1 .introduction , course over view MLS level 7](https://reader030.vdocument.in/reader030/viewer/2022032618/55b794efbb61eb5e758b465f/html5/thumbnails/13.jpg)
Requirements
Require minimum amounts of reagents and
equipment's
Don’t require high technical skills
Results
quickly and clearly obtained
Results can be easily interrupted
either qualitative or semi-quantitative
Results obtained are +ve results must be
confirmed by further more and accurate
specific results.
![Page 14: Lecture 1 .introduction , course over view MLS level 7](https://reader030.vdocument.in/reader030/viewer/2022032618/55b794efbb61eb5e758b465f/html5/thumbnails/14.jpg)
2- Confirmatory Tests:
Characteristic More complex and number of steps
Tests are more sensitive and specific
than screening test
Aim of this type Are used to confirm the positive results
obtained from screening test
Requirements
Require specialized equipments and
instruments
Are performed in the lab
Require technical skills and experience
![Page 15: Lecture 1 .introduction , course over view MLS level 7](https://reader030.vdocument.in/reader030/viewer/2022032618/55b794efbb61eb5e758b465f/html5/thumbnails/15.jpg)
Results
Results more accurate and precise than
screening test
Results can be qualitative , semi-quantitative
or quantitative
If the results is also +ve then the patient is
referred for medical examination
If the results is negative , then the disease or
disorder is ruled out (no disease)
![Page 16: Lecture 1 .introduction , course over view MLS level 7](https://reader030.vdocument.in/reader030/viewer/2022032618/55b794efbb61eb5e758b465f/html5/thumbnails/16.jpg)
3- Diagnostic tests:
Characteristic expensive and technically demanding
not necessary confirmatory tests but
confirmatory test may be diagnostic
Examples:
- High level of amylase in both blood and urine are
diagnostic for acute pancereatitis
- High level of HCG in women is diagnostoc for
pregnancy
- High level of urea and creatinine are diagnostic foe
renal abnormality
- Low level of cortisol in blood is diagnostic for
addison’s disease
- High level of glucose in GTT are diagnostic for diabetes
mellitus
![Page 17: Lecture 1 .introduction , course over view MLS level 7](https://reader030.vdocument.in/reader030/viewer/2022032618/55b794efbb61eb5e758b465f/html5/thumbnails/17.jpg)
Place of performed
Usually performed in the lab
Aim of this type
check for specific substances which are
indicative for the presence of disease or
disorder.
Requirements
Require skill , experience, and good
background of pathophysiology of the disease
Require instruments and equipments of high
accuracy and precision
Require tests with high sensitivity and
specificity
![Page 18: Lecture 1 .introduction , course over view MLS level 7](https://reader030.vdocument.in/reader030/viewer/2022032618/55b794efbb61eb5e758b465f/html5/thumbnails/18.jpg)
Results Can be qualitative , semi-quantitative or
quantitative
In quantitative and semi-quantitative results
the severity of the disease may be related
to the level of the substance
![Page 19: Lecture 1 .introduction , course over view MLS level 7](https://reader030.vdocument.in/reader030/viewer/2022032618/55b794efbb61eb5e758b465f/html5/thumbnails/19.jpg)
4- Definitive test:
Characteristics Highly advanced, specialized and complex procedures
They include ; PCR , Mass-spectroscopy ,
HPLC , GC
Aim of this type
1-Detection of inherited disorder such as; a.a
metabolism abnormalities, f.a metabolism
abnormalities, cystic fibrosis , muscular
dystrophy ,coagulation abnormalities , Hb
abnormalities and many other.
2-It is also being applied to detect the presence
of viruses , bacteria and other microorganisms
![Page 20: Lecture 1 .introduction , course over view MLS level 7](https://reader030.vdocument.in/reader030/viewer/2022032618/55b794efbb61eb5e758b465f/html5/thumbnails/20.jpg)
Aim of this type
3-detect the presence of specific causative
agents such as ; genes , gene mutations ,
specific metabolites or specific cells
This type of tests are able to show disease
variations
Requirements
high level of technical skill , good
experience and background on advanced
techniques
high complex and advanced instruments and
equipments
Results Usually qualitative
![Page 21: Lecture 1 .introduction , course over view MLS level 7](https://reader030.vdocument.in/reader030/viewer/2022032618/55b794efbb61eb5e758b465f/html5/thumbnails/21.jpg)
Types of equipments and instruments are used in clinical
laboratoriesA)Basic equipments :
Example
- Pipette -Glassware
- -Plastic ware
-Mixer -Balances
-Fridge -Safety cabinet
-Freezer -Fume-cupboard
-Centrifuge
![Page 22: Lecture 1 .introduction , course over view MLS level 7](https://reader030.vdocument.in/reader030/viewer/2022032618/55b794efbb61eb5e758b465f/html5/thumbnails/22.jpg)
B)Single application instruments:
-Example:
light microscope -spectrophotometer
single channel counter
single test analyzers (PH Pco2,Po2 , Na, K , Cl, Hb-
meter)
-Can be linked to computer for operations and results
-Very important in high capacity(large) laboratory
![Page 23: Lecture 1 .introduction , course over view MLS level 7](https://reader030.vdocument.in/reader030/viewer/2022032618/55b794efbb61eb5e758b465f/html5/thumbnails/23.jpg)
-Reduce the amount of time ,effort and
space required for tests.
-Example
1-automated hematology analyzer :
measure RBCs , WBCs ,platelets , Hb,
Differential , Hct , and calculate MCV ,
MCHC)
2-automated chemistry analyzer(measure
number of analytes
![Page 24: Lecture 1 .introduction , course over view MLS level 7](https://reader030.vdocument.in/reader030/viewer/2022032618/55b794efbb61eb5e758b465f/html5/thumbnails/24.jpg)
C) Multi-tests (multi-sample instruments):
-usually fully or partially automated
-Can carry out more than one measurements
-Can process many samples
-Depend on electronic and computer controls
-Combine various technique and instruments in one large
system as :
(pipetting+spectrophotometer+ISE+incubator+mixer+
Washing + centrifugation+calculation)
![Page 25: Lecture 1 .introduction , course over view MLS level 7](https://reader030.vdocument.in/reader030/viewer/2022032618/55b794efbb61eb5e758b465f/html5/thumbnails/25.jpg)
Important consideration in using tests , equipment's & instruments
-title/name -purpose and aim
-principle of operation the instruments
-principle of test -proper methodology
-reagent preparation -type of specimen
-collection and handling of specimen
-transportation
-processing and storage of specimen
-precaution and source of errors
![Page 26: Lecture 1 .introduction , course over view MLS level 7](https://reader030.vdocument.in/reader030/viewer/2022032618/55b794efbb61eb5e758b465f/html5/thumbnails/26.jpg)
-safety consideration(electrical, fire,biological,chemical ,waste)
-use of standards , calibrators and controls
-results calculation and interpretation
-installation and maintenance of instruments
-sensitivity and specificity ,accuracy and precision of test
and instruments .
-updating/changing of tests and instruments
-always time manage and organize your procedures and
instruments
![Page 27: Lecture 1 .introduction , course over view MLS level 7](https://reader030.vdocument.in/reader030/viewer/2022032618/55b794efbb61eb5e758b465f/html5/thumbnails/27.jpg)
THANK YOU