lecture 11
TRANSCRIPT
![Page 1: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/1.jpg)
DATA COMMUNICATIONS & NETWORKING
LECTURE-11
Course Instructor : Sehrish Rafiq
Department Of Computer Science
University Of Peshawar
![Page 2: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/2.jpg)
LECTURE OVERVIEW Digital-To –Analog Modulation ASK FSK PSK QAM
![Page 3: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/3.jpg)
DIGITAL-TO-ANALOG MODULATION
Modulation of binary data or digital to analog modulation is the process of changing one of the characteristics of an analog signal based on the information a digital signal(0’s and 1’s).
When you transmit data from one computer to another across a public phone line, the original data is digital but because telephone lines carry analog signals, the data must be converted.
The digital data must be modulated on an analog signal that has been manipulated to look like two distinct values corresponding to binary 1 and binary 0.
![Page 4: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/4.jpg)
DIGITAL-TO-ANALOG MODULATION
![Page 5: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/5.jpg)
BIT RATE BAUD RATE & CARRIER FREQUENCY
Bit rate is the number of bits per second. Baud rate is the number of signal units per
second. Baud rate < Bit rate.
If an analog signal carries 4 bits in each signal unit. If 1000 signal units are sent per second, find the baud rate and the bit rate???
The bit rate of a signal is 3000.If each signal unit carries 6 bits, what is the baud rate???
Example 1Example 1
![Page 6: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/6.jpg)
SOLUTIONS
Baud rate=number of signal units per second =>Baud rate =1000 bauds per second(bauds/s). Bit Rate = baud rate x number of bits per signal
unit =>Bit rate=1000x 4=4000bps.
Baud rate=bit rate/number of bits per signal unit =>Baud rate =3000/6=500 baud/s.
Solution 1Solution 1
Solution 2Solution 2
![Page 7: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/7.jpg)
CARRIER FREQUENCY In analog transmission, the sending device
produces a high –frequency signal that acts a basis for the information signal.
This base signal is called the carrier signal or carrier frequency.
The receiving device is tuned to the frequency of the carrier signal that it expects from the sender.
![Page 8: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/8.jpg)
CARRIER FREQUENCY Digital information then modulates the carrier
signal by modifying one or more of its characteristics( amplitude, frequency or phase).
This kind of modification is called modulation or shift keying.
The information signal is called the modulating signal.
![Page 9: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/9.jpg)
TYPES OF DIGITAL-TO-ANALOG MODULATION
![Page 10: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/10.jpg)
ASK(AMPLITUDE SHIFT KEYING)
In amplitude shift keying,the strength of the carrier signal is varied to represent binary 1 or 0.
Both frequency and phase remain constant while the amplitude changes.
Which voltage represents 1 and which represents 0 are left to the system designers.
A bit duration is the period of time that defines 1 bit.
The peak amplitude of the signal during each bit duration is constant and its value depends on the bit (0 or 1).
![Page 11: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/11.jpg)
ASK(AMPLITUDE SHIFT KEYING)
![Page 12: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/12.jpg)
PROBLEMS WITH ASK
ASK transmission is highly susceptible to noise interference.
The term noise refers to unintentional voltages introduced on to a line by various phenomena such as heat or electromagnetic induction created by other sources.
These unintentional voltages combine with the signal to change the amplitude.
A 0 can be changed to 1 and a 1 can be changed to 0.
![Page 13: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/13.jpg)
PROBLEMS WITH ASK CONTINUED…
High amount of energy is required. A popular ASK technique is called on/off
keying(OOK). In OOK one of the values is represented by
no voltage. The advantage is a reduction in the amount
of energy required to transmit information.
![Page 14: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/14.jpg)
ON-OFF KEYING OR BINARY AMPLITUDE SHIFT KEYING
![Page 15: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/15.jpg)
BAND WIDTH FOR ASK
Although there is only one carrier frequency, the process of modulation produces a complex signal that is a combination of many simple signals, each with a different frequency.
When we decompose an ASK-modulated signal ,we get a spectrum of many simple frequencies.
However the most significant ones are those between fc - N baud/2 and fc + N baud/2 with fc as the carrier frequency and N baud as the baud rate.
![Page 16: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/16.jpg)
BAND WIDTH FOR ASK
The Bandwidth requirements of ASK are calculated using the formula:
BW=(1+d) N baud d is a constant factor whose value lies
between 0 and 1. The value of d depends on the modulation
and filtration process and the medium.
![Page 17: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/17.jpg)
BAND WIDTH FOR ASK
![Page 18: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/18.jpg)
Example 3Example 3
Find the minimum bandwidth for an ASK signal transmitting at 2000 bps. The transmission mode is half-duplex.
SolutionSolution
In ASK the baud rate and bit rate are the same. The baud rate is therefore 2000. An ASK signal requires a minimum bandwidth equal to its baud rate. Therefore, the minimum bandwidth is 2000 Hz.
![Page 19: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/19.jpg)
Example 4Example 4
Given a bandwidth of 5000 Hz for an ASK signal, what are the baud rate and bit rate?
SolutionSolution
In ASK the baud rate is the same as the bandwidth, which means the baud rate is 5000. But because the baud rate and the bit rate are also the same for ASK, the bit rate is 5000 bps.
![Page 20: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/20.jpg)
FREQUENCY SHIFT KEYING
In FSK, the frequency of the carrier signal is varied to represent binary 1 or 0.
The frequency of the signal during each bit duration is constant and its value depends on the bit (0 or 1).
Both peak amplitude and phase remain constant.
![Page 21: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/21.jpg)
HOW FSK HANDLES NOISE PROBLEM???
FSK avoids most of the problems from noise. Because the receiving device is looking for
specific frequency changes over a given number of periods, it can ignore voltage spikes.
The limiting factors of FSK are the physical capabilities of the medium.
![Page 22: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/22.jpg)
BAND WIDTH REQUIREMENT FOR FSK
Although there are only two carrier frequencies, the process of modulation produces a composite signal that is a combination of many simple signals each with a different frequency.
We can say that the FSK spectrum is a combination of two ASK spectra centered on fc0 and fc1 .
BW= fc1 - fc0 + N baud .
![Page 23: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/23.jpg)
PSK In Phase shift keying, the phase of the carrier is
varied to represent binary 1 or 0. Both peak amplitude and frequency remain
constant as the phase changes. For example we start with a phase of 0 degree
to represent binary 0 then we can change the phase to 180 degree to represent binary 1.
The phase of the signal during each bit duration is constant and the value depends on the bit (0 or 1).
This method is often called 2-PSK or binary PSK , because two different phases(0 degree and 180 degree are used).
![Page 24: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/24.jpg)
2-PSK OR BINARY PSK METHOD
![Page 25: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/25.jpg)
2-PSK OR BINARY PSK METHOD
![Page 26: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/26.jpg)
4-PSK METHOD
![Page 27: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/27.jpg)
4- PSK METHOD
![Page 28: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/28.jpg)
8-PSK
![Page 29: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/29.jpg)
BAND WIDTH FOR PSK
The minimum bandwidth required for PSK transmission is the same as that required for ASK Transmission.
![Page 30: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/30.jpg)
BIT RATE IN PSK
The maximum baud rates of ASK and PSK are same for a given bandwidth.
PSK bit rates using the same bandwidth as ASK can be 2 or more times greater.
![Page 31: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/31.jpg)
LIMITATIONS OF PSK PSK is limited by the ability of the equipment
to distinguish small differences in phase. This factor limits its potential bit rate.
![Page 32: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/32.jpg)
Example 5Example 5
Find the bandwidth for a 4-PSK signal transmitting at 2000 bps. Transmission is in half-duplex mode.
SolutionSolution
For PSK the baud rate is the same as the bandwidth, which means the baud rate is 5000. But in 8-PSK the bit rate is 3 times the baud rate, so the bit rate is 15,000 bps.
![Page 33: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/33.jpg)
Given a bandwidth of 5000 Hz for an 8-PSK signal, what are the baud rate and bit rate?
Example 6Example 6
SolutionSolution
For PSK the baud rate is the same as the bandwidth, which means the baud rate is 5000. But in 8-PSK the bit rate is 3 times the baud rate, so the bit rate is 15,000 bps.
![Page 34: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/34.jpg)
QAM(QUADRATURE AMPLITUDE MODULATION)
Band width limitations makes combinations of FSK practically useless.
Why not combine ASK and PSK?
If we have x variations in phase and y variations in amplitude, giving us x times y possible variations and the corresponding number of bits per variation.
Quadrature amplitude modulation is a combination of ASK and PSK so that a maximum contrast between each signal unit(bit, dibit, tribit and so on) is achieved.
![Page 35: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/35.jpg)
QAM CONTINUED… Theoretically, any measurable number of
changes in amplitude can be combined with any measurable number of changes in phase.
![Page 36: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/36.jpg)
4-QAM & 8-QAM CONSTELLATIONS
![Page 37: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/37.jpg)
8-QAM SIGNAL
![Page 38: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/38.jpg)
BIT AND BAUD RATE COMPARISON
![Page 39: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/39.jpg)
BIT AND BAUD RATE COMPARISON
ModulationModulation UnitsUnitsBits/Bits/BaudBaud
Baud rateBaud rateBit
Rate
ASK, FSK, 2-PSKASK, FSK, 2-PSK Bit 1 N N
4-PSK, 4-QAM4-PSK, 4-QAM Dibit 2 N 2N
8-PSK, 8-QAM8-PSK, 8-QAM Tribit 3 N 3N
16-QAM16-QAM Quadbit 4 N 4N
32-QAM32-QAM Pentabit 5 N 5N
64-QAM64-QAM Hexabit 6 N 6N
128-QAM128-QAM Septabit 7 N 7N
256-QAM256-QAM Octabit 8 N 8N
![Page 40: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/40.jpg)
Example 7Example 7
A constellation diagram consists of eight equally spaced points on a circle. If the bit rate is 4800 bps, what is the baud rate?
SolutionSolution
The constellation indicates 8-PSK with the points 45 degrees apart. Since 23 = 8, 3 bits are transmitted with each signal unit. Therefore, the baud rate is 4800 / 3 = 1600 baud
![Page 41: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/41.jpg)
Example 8Example 8
Compute the baud rate for a 72,000-bps 64-QAM signal.
SolutionSolution
A 64-QAM signal has 6 bits per signal unit since log2 64 = 6. Thus, 72000 / 6 = 12,000 baud
![Page 42: Lecture 11](https://reader033.vdocument.in/reader033/viewer/2022052901/5565e2b2d8b42ae8488b4edc/html5/thumbnails/42.jpg)
THANKS!!!