lecture 3, principles of cavity preparation
TRANSCRIPT
-
8/3/2019 Lecture 3, Principles of Cavity Preparation
1/12
-
8/3/2019 Lecture 3, Principles of Cavity Preparation
2/12
Principles of Cavity Preparation
Last lecture we stopped at burs , now we will continue :Burs are composed of three parts :
1) shank: which is fixed on the hand piece.
2) Neck : that connects the head to the shank and transmit the
force to the head.
3) Head : the working part of the bur.
When we put the bur in the hand piece the force come from the hand
piece to the shank then from the shank to the head by the neck.
Burs can be classified according to two things :1) Head of bur : As we call them in the lab , we have fissure
bur, round bur, pear shaped.2) Number : unfortunately we dont use the number.
We have a lot of burs but at this picture we just have the basic burs that
we use in the clinic and its important to know them, and to know that
most of them are made from Tungsten carbide.
The number of Pear
shaped bur is 330.
-
8/3/2019 Lecture 3, Principles of Cavity Preparation
3/12
We have :1) Round : we have high-speed and slow-speed ( its head is
round )
2) Inverted cone : also we have high-speed and slow-speed.
(the tip is larger than the base so we call it inverted )
3) Pear shaped : because it looks like the pear.
4) Straight fissure : because its straight from both sides.
5) Tapered fissure : the base is broad and the apex is tapered.
Recommended burs
From left to the right : first four are round but they are differ from each
other by the size of the head ( , , 2 , 4 , 6, 8 ) .
Number 5 is inverted, number 6 is tapered, number 7 is straight , number
8 is tapered, the last is straight.*** Dont care about the number we just need the shape.
Finishing burs :
They are tungsten carbide also , but we call them finishing burs , we use
them to finish restoration ( composite , amalgam) , they come in several
size and shaped , we have :
1) Round
2) Torpedo3) Tapered
-
8/3/2019 Lecture 3, Principles of Cavity Preparation
4/12
Instrument grasps
-Its very important because you will take the grasp like a habit so you
must learn the correct grasp .
-The more efficient grasp is the pen grasp ( we use it as the pen and we
use the rest of our fingers to rest so we will have more support and we
can control the hand pieces better and we will not harm the patients oral
cavity) .
-We have the palm and thumb grasp but its less supportive.So please any instrument in the lab use the pen grasp.
Now we are going to start the new lecture .
Principles of cavity preparation
1- Objective of tooth preparation
2- Factors affecting your tooth preparation
They come in mini/small size and have
more blades than normal so cutting
efficiency is more and we use them in
finishing and polishing.
-
8/3/2019 Lecture 3, Principles of Cavity Preparation
5/12
3- Stages and steps of tooth preparation
Stages and steps of tooth preparation
The doctor now doesnt follow them because she has the experience but
for us we have to follow them to learn.
For example in the lab we drill all fissures in tooth preparation but in the
clinic we just include the fissures that contain the caries only so we will
be more conservative, but here we learn the ideal cavity preparation.
Definition of tooth preparation : The mechanical alteration of defective,
injured, or diseased tooth to best receive a restorative material that will
reestablish a healthy state for the tooth, including esthetic corrections
where indicated, along with normal form and function.
Why we do the cavity preparation ??
To remove the defect from the tooth whether this defect is caries, trauma,
or congenital defect of the tooth , so we want to remove this defect, and
put it in a form or a shape that will receive the restorative materials ( like
what we do in amalgam, we prepare the tooth with depth = 1.5mm if the
depth is less the amalgam will fracture) so we are prepare a certain shape
to receive the restorative material to return the tooth to its normal shape
and function ( like making fissures, grooves, slope of the cusps, line of
cusps.. ) and esthetic ( when we use composite its not just for function
but also for esthetic)
The objective :
1- Remove all defects & provide necessary protection to the
pulp.
2- Extend the restoration as conservatively as possible
( because once you remove the tooth structure you remove it fromthe residual of the tooth and you will in more danger when you areclose to the pulp).3- Form the tooth preparation so that under masticatory forces
the tooth or restoration will not fracture or the restoration will not
-
8/3/2019 Lecture 3, Principles of Cavity Preparation
6/12
be displaced.( when we form tooth preparation we have two forms:resistance form and retention form )***Resistance form : to resist fracture of bone, tooth and
restoration.
***Retention form : to avoid removal of the restoration from thetooth.
4- Allow for functional & esthetic placement of restorative
material.
Factors affecting tooth preparation :
1) Diagnosis : I will not hold the burs and start drilling the
tooth without knowing the cause of the problem or knowing the
proper diagnosis of the tooth in the patients mouth in the patient
so we are treating the patient. The reason for placing the restoration in the tooth :
why we will do this cavity ? I want just to return thefunction ? or I care about the esthetic only ? to protect the pulp ?? you need to know the answers for thesequestions before doing the cavity!
Periodontal & pulpal status: its very important ( forexample if the tooth has a class 1 caries and needs cavity
preparation and restoration but at the same time this toothis hopeless for example it is moving because there is a
periodontal disease and its suppose that it will not lastmore than 2 months in the patients mouth, so we need tomake RCT after the restoration , we will drill therestoration again then make RCT. so we need to know the
status of the tooth before doing the cavity.
Esthetic factor:it depends on the patient.
Relationship with other treatment plans.
The risk potential of the patient for other dentalcaries
: some patients we considered them as high risk of caries
so we place any restoration that could release fluoride likemodified glass ionomer cement.
2) Knowledge of Dental Anatomy:
When you prepare the cavity we need to know the
dental anatomy ( enamel , dentin , pulp) , we need to know
that the thickness of enamel in the occlusal part is thicker
than in the cervical part, so when we are drilling 1.5mm in
the occlusal surface maybe we are not in the dentin but in the
-
8/3/2019 Lecture 3, Principles of Cavity Preparation
7/12
cervical part we are sure that we are in the dentin and close
to the pulp.
Also when we prepare a tooth we will consider a
young patient differs from an old patient why?? Becausewith age we will have Recession for the pulp ( decreasing in
the size of the pulp) because we are having secondary
dentin, tertiary dentine so you are having more tooth
structure to work with in old patient because of the thickness
of dentin and the height of the pulp will be changed.
3) Patient Factors:
The patient knowledge & appreciation for good dental
health.( if the patient has more knowledge about oral hygieneso we will think about using a good restorative material whichcould be expensive, but if the patient doesnt brush his teeth ordoesnt know about the oral hygiene we will use a lessexpensive material) .
Patients economic status : you shouldnt make anytreatment or restoration before asking the patient and telling
him how much it will cost.
Gross picture of the tooth both
internally and externally must
be visualized.
The thickness of enamel,
dentin and position of the
pulp.
Relation to other supporting
tissues ( when we prepare tooth
near the supporting tissue like
deep class 2 or deep class 5 ) .
-
8/3/2019 Lecture 3, Principles of Cavity Preparation
8/12
The patient age: related to the anatomy and to the lifeexpectancy, for example if the patient is very old and has a lotof health disease so we put a good restoration but not veryexpensive and could be for a short time ( for example if I have a
patient (70 years old) and has many medical problems andneeds MOD restoration so Ill not make a crown for him or useamalgam, I just use GIC because its less expensive and can beuseful for him and will not take a long time to use it ).
4) Conservation of Tooth Structure:
We want to make the cavity in a form that is proper for the
material but we should be conservative.
Preservation of the vitality of the tooth by avoiding
the application of poor or careless operative procedures onthe tooth .
Restorations should be made as small as possible :( should be convenient and restorative ; I mean as small as
possible and in the form of retention and restoration)
Small tooth preparations result in restorations thathas little effect on both inter-arch & intra-arch relationshipsas well as esthetics. : when we make a restoration as smallas possible it affects the adjacent teeth(adjacent teeth:intra-arch relationship), the opposing teeth(apposing teeth
: inter-arch relationship) and on the esthetic. when we drillthe occlusal surface we remove the fissures and grooves, soit has a little effect than if we replace a cusp; because asmuch as we do we will not return it to the normal shape ofthe tooth . we try to do that but we cant do it 100% . Inintra-arch when we do class 2 cavity then it will affect theadjacent tooth , if it is small the effect will be less but if itsbig the interference will be large. So when you make arestoration make it small as possible as you can to make
the interference less .
5) Restorative Material Factors:
Mainly we are talking about direct restorative materials.
Amalgam Vs resin composite. To some extend glass
ionomer cement. ( demands for cavity preparation for amalgam
will differ from the composite because the amalgam has a
mechanical retention but the composite has a micromechanical
-
8/3/2019 Lecture 3, Principles of Cavity Preparation
9/12
retention ( can adhere to the tooth) so the criteria for preparing
the cavity will differ)
The ability to isolate the operating field.
The extension of the problem (i.e. caries).
Stages and Steps of Tooth Preparation
Stages and steps of tooth preparation
Initial Stage
Outline form & initial
depth.
Primary resistance form.
Primary retention form.
Convenience form.
final Stage5. Removal of any remaining
infected dentin.
6. Pulp protection if indicated
7. Secondary resistance &
retention forms.
8. Procedures for finishing
external walls .
9. Final procedures: cleaning,
inspecting & sealing.
You have to follow
these stages because
you are still a
student so when you
are doing the cavity
you need to visualizethese steps.
-
8/3/2019 Lecture 3, Principles of Cavity Preparation
10/12
a)Initial Tooth Preparation Stage:
1. Outline form & initial depth:
Each cavity has its own out line form
Placing the preparation margins in the positions theywill occupy in the final preparation : Im drawing the outline
and he borders ( where Im going to stop)
Preparing an initial depth of 0.2 to 0.8 mm pulpally of
the DEJ position : I dont go to the full depth at the
beginning, I should go to the initial depth and this initial
depth is different when Im doing class 1 or class 5 because
the thickness of enamel is different, so in class 1 most of my
cavity preparation will be in the enamel but in class 5 it will
be in dentin.
Why 0.2 to 0.8 ??0.2mm inside DEJ when Im going to make class1 occlusaly,
0.8mm in class 5, thats mean Ill be in dentin in class 5 for
0.8mm but in class1 Ill be slightly in the dentine just for
0.2mm. ( look at the picture below)
-
8/3/2019 Lecture 3, Principles of Cavity Preparation
11/12
3 principles to put the initial depth and the outline :
1. All weakened enamel should be removed.( because this
enamel maybe break in the future )
2. All faults should be included.( all grooves and fissure )
3. All margins should be placed in position to affordgood finishing of the margins of the restoration ( Ill not
leave the border of my cavity at a fissure but at smooth
surface so the finishing will be easier)
The end
Done by : Haneen Zuhdi Al-kwamleh
Thx a lot Walaa Khdour for the help
-
8/3/2019 Lecture 3, Principles of Cavity Preparation
12/12
Walaa and Eman : Best
friends are like diamonds,precious and rare.