lecture notes for illumination engineering
DESCRIPTION
for be electrical guysTRANSCRIPT
![Page 1: Lecture Notes for Illumination Engineering](https://reader036.vdocument.in/reader036/viewer/2022062308/55cf9b94550346d033a69b8f/html5/thumbnails/1.jpg)
Illumination
(Lighting Engineering)
Lecture notes
Power Distribution & Utilization
By Abid Mushtaq
![Page 3: Lecture Notes for Illumination Engineering](https://reader036.vdocument.in/reader036/viewer/2022062308/55cf9b94550346d033a69b8f/html5/thumbnails/3.jpg)
Illumination Light is
emitted and absorbed in tiny "packets" called photons, exhibits properties of both waves and particles
simply a very small part of the electromagnetic spectrum,
sandwiched between ultraviolet and infrared radiation.
![Page 4: Lecture Notes for Illumination Engineering](https://reader036.vdocument.in/reader036/viewer/2022062308/55cf9b94550346d033a69b8f/html5/thumbnails/4.jpg)
IlluminationVisible Spectrum
700 nm 400 nm
![Page 5: Lecture Notes for Illumination Engineering](https://reader036.vdocument.in/reader036/viewer/2022062308/55cf9b94550346d033a69b8f/html5/thumbnails/5.jpg)
Illumination
![Page 6: Lecture Notes for Illumination Engineering](https://reader036.vdocument.in/reader036/viewer/2022062308/55cf9b94550346d033a69b8f/html5/thumbnails/6.jpg)
Primary properties of light are Intensity, Propagation direction, Frequency or wavelength spectrum, and polarization, while its speed, about 300,000,000 meters
per second (300,000 kilometers per second) in a vacuum, is one of the fundamental constants of nature.
![Page 7: Lecture Notes for Illumination Engineering](https://reader036.vdocument.in/reader036/viewer/2022062308/55cf9b94550346d033a69b8f/html5/thumbnails/7.jpg)
Illumination
Illumination: To provide light to a surface is called
illumination. The required level of light may vary from
surface to surface and purpose to purpose. For example , in a drawing room, we need more
illumination than in verandah. A watch repairer needs high illumination (in the form of direct light) as compared to the illumination required in a reading room.
![Page 8: Lecture Notes for Illumination Engineering](https://reader036.vdocument.in/reader036/viewer/2022062308/55cf9b94550346d033a69b8f/html5/thumbnails/8.jpg)
Illumination
Some Important Term: Luminous flux:
It is the energy radiated (in the form of light waves) by a body per second.
Luminous or Radiant Efficiency:
The ratio between the energy radiated in the form of light to the total energy radiated (in all forms i.e, heat etc) is known as Radiant energy(ηrad.)
![Page 9: Lecture Notes for Illumination Engineering](https://reader036.vdocument.in/reader036/viewer/2022062308/55cf9b94550346d033a69b8f/html5/thumbnails/9.jpg)
Illumination
Solid angle:
The angle subtended by an area at a point is called solid angle.
![Page 10: Lecture Notes for Illumination Engineering](https://reader036.vdocument.in/reader036/viewer/2022062308/55cf9b94550346d033a69b8f/html5/thumbnails/10.jpg)
Illumination
Lumen: It is the unit of luminous flux and may be defined as luminous flux, emitted per unit
solid angle, from a light source of 1 candle power (C.P).
Lumen = Candle Power x Solid Angle = C.P x ω
Total Luminous flux emitted by the source of 1 C.P = 4π lumens
![Page 11: Lecture Notes for Illumination Engineering](https://reader036.vdocument.in/reader036/viewer/2022062308/55cf9b94550346d033a69b8f/html5/thumbnails/11.jpg)
Illumination
Candle Power:
We have seen that
Lumen = C.P x ω
C.P = Lumen/ω The candle power may be defined as:
the number of lumens emitted by a source per unit solid angle in a given direction.
It represents the light emitting capacity of a source.
![Page 12: Lecture Notes for Illumination Engineering](https://reader036.vdocument.in/reader036/viewer/2022062308/55cf9b94550346d033a69b8f/html5/thumbnails/12.jpg)
Illumination
Foot Candle: It is the unit of illumination. It is the illumination of the inside of a sphere of
radius 1ft with a source of 1 C.P at its centre.
![Page 13: Lecture Notes for Illumination Engineering](https://reader036.vdocument.in/reader036/viewer/2022062308/55cf9b94550346d033a69b8f/html5/thumbnails/13.jpg)
![Page 14: Lecture Notes for Illumination Engineering](https://reader036.vdocument.in/reader036/viewer/2022062308/55cf9b94550346d033a69b8f/html5/thumbnails/14.jpg)
Illumination
Some Important Concepts: Transmission
When light passes through an object, it is called transmission.
Absorption, reflection, refraction, and diffusion all affect light transmission.
![Page 15: Lecture Notes for Illumination Engineering](https://reader036.vdocument.in/reader036/viewer/2022062308/55cf9b94550346d033a69b8f/html5/thumbnails/15.jpg)
Illumination Absorption
Instead of completely transmitting light, an object can absorb part or all of the incident light, usually by converting it into heat.
Many materials absorb some wavelengths while transmitting others, which is called selective absorption.
Sky, snow etc? Glass filters: Sunglasses
![Page 16: Lecture Notes for Illumination Engineering](https://reader036.vdocument.in/reader036/viewer/2022062308/55cf9b94550346d033a69b8f/html5/thumbnails/16.jpg)
Illumination
Filtering A transmissive filter is a material that absorbs
some wavelengths and transmits others, while a reflective filter absorbs some
wavelengths and reflects others.
![Page 17: Lecture Notes for Illumination Engineering](https://reader036.vdocument.in/reader036/viewer/2022062308/55cf9b94550346d033a69b8f/html5/thumbnails/17.jpg)
Illumination
Diffusion (Scattering) When light strikes a
perfectly smooth surface, the reflection is laminar,
When light strikes a rough surface, the light is reflected or transmitted in many different directions at once, which is called diffusion or scattering.
![Page 18: Lecture Notes for Illumination Engineering](https://reader036.vdocument.in/reader036/viewer/2022062308/55cf9b94550346d033a69b8f/html5/thumbnails/18.jpg)
![Page 19: Lecture Notes for Illumination Engineering](https://reader036.vdocument.in/reader036/viewer/2022062308/55cf9b94550346d033a69b8f/html5/thumbnails/19.jpg)
Illumination
![Page 20: Lecture Notes for Illumination Engineering](https://reader036.vdocument.in/reader036/viewer/2022062308/55cf9b94550346d033a69b8f/html5/thumbnails/20.jpg)
Illumination
Laws of Illumination: The Inverse Square Law:
The illumination at a point on a surface when the surface is perpendicular to the direction of the source varies directly with the luminous intensity of the source and inversely with the square of the distance between the source and the point:
where: E = illumination in footcandles (or lux)I = luminous intensity in candlepower (or candela)d = distance in feet (or meters)
![Page 21: Lecture Notes for Illumination Engineering](https://reader036.vdocument.in/reader036/viewer/2022062308/55cf9b94550346d033a69b8f/html5/thumbnails/21.jpg)
Illumination
![Page 22: Lecture Notes for Illumination Engineering](https://reader036.vdocument.in/reader036/viewer/2022062308/55cf9b94550346d033a69b8f/html5/thumbnails/22.jpg)
Illumination
Lambert’s Cosine Law
The illumination of any surface varies as the cosine of the angle of incidence, θ, where the angle of incidence is the angle between the normal to the surface and the direction of the incident light.
Combined with the equation just given, the formula becomes:
![Page 23: Lecture Notes for Illumination Engineering](https://reader036.vdocument.in/reader036/viewer/2022062308/55cf9b94550346d033a69b8f/html5/thumbnails/23.jpg)
Illumination
![Page 24: Lecture Notes for Illumination Engineering](https://reader036.vdocument.in/reader036/viewer/2022062308/55cf9b94550346d033a69b8f/html5/thumbnails/24.jpg)
Processes/phenomena which are responsible for generation of light Incandescence Electric Discharge Arc formation Electro-luminance Photo-luminance
![Page 25: Lecture Notes for Illumination Engineering](https://reader036.vdocument.in/reader036/viewer/2022062308/55cf9b94550346d033a69b8f/html5/thumbnails/25.jpg)
Illumination Light is emitted from a body
due to any of the following phenomenon.
Incandescence Solids and liquids emit visible
radiation when they are heated to temperatures about 1000K.
As the temperature increases, the intensity increases and the appearance becomes whiter.
![Page 26: Lecture Notes for Illumination Engineering](https://reader036.vdocument.in/reader036/viewer/2022062308/55cf9b94550346d033a69b8f/html5/thumbnails/26.jpg)
Illumination Electric Discharge
When an electric current is passed through a gas the atoms and molecules emit radiation whose spectrum is characteristic of the elements present.
Electrons fall from High to low energy levels resulting in infrared, visible light, or ultraviolet radiation
![Page 27: Lecture Notes for Illumination Engineering](https://reader036.vdocument.in/reader036/viewer/2022062308/55cf9b94550346d033a69b8f/html5/thumbnails/27.jpg)
![Page 28: Lecture Notes for Illumination Engineering](https://reader036.vdocument.in/reader036/viewer/2022062308/55cf9b94550346d033a69b8f/html5/thumbnails/28.jpg)
Illumination
Electro luminescence Light is generated when
electric current is passed through certain solids such as semiconductor or phosphor materials.
Used for automobile dashboard lighting,
speedometers, etc LCD displays back lights Advertisement boards
![Page 29: Lecture Notes for Illumination Engineering](https://reader036.vdocument.in/reader036/viewer/2022062308/55cf9b94550346d033a69b8f/html5/thumbnails/29.jpg)
Illumination Photoluminescence
Radiation at one wavelength is absorbed, usually by a solid, and re-emitted at a different wavelength.
When the re-emitted radiation is visible the phenomenon may be termed either fluorescence or phosphorescence.
![Page 30: Lecture Notes for Illumination Engineering](https://reader036.vdocument.in/reader036/viewer/2022062308/55cf9b94550346d033a69b8f/html5/thumbnails/30.jpg)
Thank You