lecture on remediation
TRANSCRIPT
![Page 1: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/1.jpg)
INTRODUCTION TO ENVIRONMENTAL
REMEDIATION
![Page 2: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/2.jpg)
Definition• Environmental remediation: providing a
remedy for an environmental problem
• This can include removing contaminants from groundwater or cleaning up after an oil spill
• Remediation is not always just subject to the will of the people, but is often a matter of government regulation or intervention
![Page 3: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/3.jpg)
Purpose• One of the main purposes of environmental remediation
is to restore contaminated sites or resources to a level that is safe for humans and animals
• Depending on the type of damage that is done, this can be a complex and expensive process. There are companies that specialize in environmental remediation.
• Even with the help of these professionals and environmental experts, however, sometimes there is nothing that can be done to restore a contaminated site to a point where it is safe.
![Page 4: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/4.jpg)
Classification
• Environmental remediation technologies are divided into groups called ex-situ and in-situ.
• Processes that involve excavation of soil are considered ex-situ
• In-situ procedures are those that attempt to treat contamination without removing soil
![Page 5: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/5.jpg)
Remediation• Once a soil has to be remediated the key issue is ‘which is the most appropriate
technology to be used?’ • Nine possible criteria to select a remedy (The US National Contingency Plan (NCP) :
– the overall protection of human health and the environment;– compliance with applicable or relevant and appropriate requirements;– long-term effectiveness and permanence;– reduction of toxicity, mobility, and volume through treatment;– short-term effectiveness;– implementability;– cost;– state acceptance;– community acceptance.
• In the UK, three criteria that influence the choice of remediation techniques are considered (Beckett and Cairney 1993):– cost-effectiveness;– speed of reclamation;– flexibility.
![Page 6: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/6.jpg)
Remediation Technologies
![Page 7: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/7.jpg)
Classification/Categorization
• These processes can be classified according to Smith et al. (1995) as in situ and ex situ technologies
• Three Major categories or types of remedial actions:– Containment– Removal– Treatment
![Page 8: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/8.jpg)
Classification/Categorization• Containment: Restriction of contaminants to a
specific domain to prevent further spreading• Removal: A contaminant is transferred from an
open to a controlled environment• Treatment: A contaminant is rendered
innocuous.– Since the inherent toxicity of a contaminant is
eliminated by treatment, this is the preferred approach of the three
![Page 9: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/9.jpg)
Containment
• Accomplished by controlling the flow of the fluid that carries the contaminant OR by directly immobilizing the contaminant
• PHYSICAL BARRIERS: – Operation Principle: to control flow of water,
thus preventing the spread of contaminant– Usually, barrier installed downgradient of
contaminated site
![Page 10: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/10.jpg)
Containment• Used in primarily unconsolidated materials e.g.
soil or sand• May be placed to a depth of 50m• Important Considerations:
– Presence of the zone of low permeability, into which the physical barriers can be seated/keyed (to prevent flow underneath the barrier]
– Permeability of the barrier itself (to be as low as practically possible
– Types of Physical Barriers (Chapter 11 Pollution Science Book)
![Page 11: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/11.jpg)
Containment• HYDRAULIC BARRIERS:
– Similar Principle of Operation as Physical Barrier– Based on fluid potentials– Generated by the pressure differential arising from the extraction or
injection of water
• Key performance Factor– Capacity to capture the contaminant plume, in order to limit the spread of
the zone of contamination– Plum capture is a function of number, placement, and flow rate of the
wells or drains– Advantage of using well systems: tt is the only containment system that
can be used for deep systems, can be used on contaminant zones of any size (number of wells increased to handle large contaminant problems)
![Page 12: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/12.jpg)
Containment
• Wells are the most widely used method for containment, albeit with disadvantages:
– Cost of long term operation and pump maintenance
– The need to store, treat and disposed of the large quantities of contaminated water pumped to the surface
![Page 13: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/13.jpg)
Removal• Excavation (Dig and Dump):
– Excavation of the soil where contaminants reside
– Used at many sites and is highly successful
• Disadvantages:– Exposure of workers to hazardous compounds– Excavated soil require treatment and/or
disposal, which can be expensive– Limited to relatively small areas (shallow,
localized, highly contaminated source zones
![Page 14: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/14.jpg)
Removal• Pump and Treat
– Currently the most widely used technology for contaminated groundwater
– Removes contaminated water from the sub surface by using one or more wells to pump it out
• Disadvantages:– Exposure of workers to hazardous compounds– Excavated soil require treatment and/or disposal,
which can be expensive– Limited to relatively small areas (shallow, localized,
highly contaminated source zones
![Page 15: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/15.jpg)
Removal• Pump and Treat
– Currently the most widely used technology for contaminated groundwater
– Removes contaminated water from the sub surface by using one or more wells to pump it out
– Clean water brought into the contaminated region by the pumping action-removes/flushes additional contamination by inducing desorption from the solid phase
– The contaminated water pumped from the subsurface is directed to some type of treatment operation (e.g. air stripping, carbon adsorption, or biological treatment systems)
![Page 16: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/16.jpg)
Removal• Pump and Treat
– Usually used for saturated subsurfaces, can also be used to remove contaminants from the vadose zone (Referred to as in situ soil washing)
• Performance Criteria– Contaminant Plume Capture– Effectiveness of contaminant removal
• Factors limiting the effectiveness of P&T– Presence of low permeability zones– Rate limited desorption– Presence of immiscible liquids
![Page 17: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/17.jpg)
![Page 18: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/18.jpg)
Enhancement of Removal
• Contaminant removal can be difficult due to such factors as:– Low solubility– High degree of sorption– Presence of immiscible liquid phases
• Which limit the amount of contaminant that can be flushed by a given volume of water
![Page 19: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/19.jpg)
Enhancement of Removal• Approach: Enhancement of removal of low
solubility, high sorption contaminants
• One of the approaches: Inject a chemical into the aquifer (such as surfactant /detergent) that will promote dissolution and desorption of the contaminant, thus enhancing removal effectiveness
• (surfactants work like industrial and household detergents used to remove oily residues from machinery, clothing or dishes (details pg 159 pollution science book)
![Page 20: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/20.jpg)
Soil Vapor Extraction• Aka soil venting: Similar to P&T
– The vadose (unsaturated) zone acts as a “buffer zone” for protecting the quality of the underlying ground water.
– When contaminated, however, it acts as a source zone for ground water pollutants and gaseous emissions
– A fluid is pumped though the contaminated domain to enhance removal
![Page 21: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/21.jpg)
SVE
Tank
Vadose Zone
Capillary Fringe
Water Table
Saturated Zone
Ground Water Flow
Dissolved in Ground Water
Vapors
Separate Fluid Phase
Residual
![Page 22: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/22.jpg)
SVE• Targets the removals of VOCs from
the vadose zone by volatilization• Shown to be effective at removing
NAPL, aqueous, and sorbed phases• Encourages aerobic biodegradation• Proven technology with some design
guidance (rule-of-thumb).
![Page 23: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/23.jpg)
SVE
Groundwater
GWWell
SVEWell
Monit.Well
To GW Treatment
PressureGauge
FlowMeter
Vapor/LiquidSeparator
VacuumPump Treatment
Unit
airflowpaths
![Page 24: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/24.jpg)
![Page 25: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/25.jpg)
![Page 26: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/26.jpg)
![Page 27: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/27.jpg)
![Page 28: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/28.jpg)
Air Sparging• Related to SVE:
– Involve injection of clean air into the saturated or aquifer
– Purpose: to volatilize contaminants from the soil into air bubles
– Air bubles make their way into the vadose zone where thay are captured using SVE system
– Can SERVE another purpose: for in situ bioremediation, air sparging can be used for oxygen supply
![Page 29: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/29.jpg)
![Page 30: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/30.jpg)
![Page 31: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/31.jpg)
![Page 32: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/32.jpg)
Bioremediation
• Aim: To exploit the naturally occuring biodegradative processes to clean up contaminated sites
• Types: In Situ, ex-situ and intrinsic bioremediation
• They all receive increasing attention as viable remediation alternatives for several reasons:– Good public acceptance/support, good success
rates to some application, low cost
![Page 33: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/33.jpg)
Bioremediation
• Drawbacks:– Success can be unpredictable due to
complex nature of biological systems– Rarely restores the environment to its
original condition• Residual contamination is inherent, as a
source of future pollution (still little research in this aspect)
![Page 34: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/34.jpg)
Bioremediation• Success: Domestic sewage waste treatment
• From this experience: Biodegradation = f(type of pollutant(s), type of microorganisms
• Outside sewage system: cleanup of oil spills using heterotrophic bacteria to degrade hydrocarbon
![Page 35: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/35.jpg)
Bioremediation• Factors for the successful application:
– Environmental conditions– Contaminant/nutrient availability– Presence of degrading microorganisms– When bioremediation fails, isolate the “culprit”-
the limiting factor (not easy task)• Initial lab tests can help determine the
presence/absence of microorganisms, reveal an obvious environmental factor that limits biodegradation (extreme pH, bioavailability, toxicity)
![Page 36: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/36.jpg)
Bioremediation
• Most developed bioremediation technologies based on two standard practices:– Addition of Oxygen– Addition of other nutrients
![Page 37: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/37.jpg)
In Situ Bioremediation• Defn: Methods that allow in-place clean
up of contaminated field sites• Great interest on these technologies
because of cost effectiveness and less risk as a result of contacting the contaminants
• Two major types– Biological (in situ bioremediation)– Chemical
![Page 38: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/38.jpg)
Bioventing• Technique used to add oxygen directly to a
site of contamination in the vadose zone (a combo of soil venting and bioremediation)– A series of wells constructed arnd the zone of
contamination– Vacuum introduced to force accelerated air movement– This will effectively increase oxygen supply, hence rate
of biodegradation– Volatile pollutants are removed as the air moves-
treated using biofilters
![Page 39: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/39.jpg)
![Page 40: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/40.jpg)
Air Sparging• Used to add oxygen to the saturated
zone• The injected air displaces water in the
soil matrix-create temp air-filled porosity
• Causes oxygen increase, enhancing biodegradation rates
• Volatile organics into the air stream, removed by vapor extraction
• Methane can also be used for sparging– To stimulate growth of methanotrophic activity and
comebotalic degradation of chlorinated solvents
![Page 41: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/41.jpg)
![Page 42: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/42.jpg)
Biodegradation and Metabolism• Biodegradation:
– involves chemical transformations mediated by microorganisms that satisfy nutritional requirements, satisfy energy requirements, detoxify the immediate environment, or occur fortuitously such that the organism receives no nutritional or energy benefit
• Mineralization: – complete biodegradation of organic materials to inorganic products, and often occurs
through the combined activities of microbial consortia rather than through a single microorganism
• Cometabolism:– is the partial biodegradation of organic compounds that occurs fortuitously and that does
not provide energy or cell biomass to the microorganism(s).– can result in partial transformation to an intermediate that can serve as a
carbon and energy substrate for microorganisms, as with some hydrocarbons, or can result in an intermediate that is toxic to the transforming microbial cell, as with trichloroethylene (TCE) and methanotrophs.
![Page 43: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/43.jpg)
Biodegradation and Metabolism
• Two classes of biodegradation reactions are aerobic and anaerobic– Aerobic biodegradation: involves the use of molecular oxygen,
where (the "terminal electron acceptor") receives electrons transferred from an organic contaminant:
![Page 44: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/44.jpg)
Biodegradation and Metabolism• Thus, the organic substrate is oxidized (addition of
oxygen), and the is reduced (addition of 2 electrons and hydrogen) to water (H2O)
• In this case, the organic substrate serves as the sources 2 of energy (electrons) and the source of cell carbon used to build microbial cells (biomass).
• Some microorganisms (chemoautotrophic aerobes or lithotrophic aerobes) oxidize reduced inorganic compounds (NH3 , Fe2+ , or H2S) to gain energy and fix CO2 to build cell carbon:
![Page 45: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/45.jpg)
Environmental Factors Affecting Biodegradation
![Page 46: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/46.jpg)
Site Characterization• A contaminated site is a system generally consisting of four
phases:– solid, which has an organic matter component and an inorganic mineral
component composed of sand, silt, and clay, – oil (commonly referred to as nonaqueous phase liquid, or NAPL), – gas, and – aqueous (leachate or ground water).
• These phases and compartments need to be characterized with regard to extent and distribution of contamination as well as potential exposure to human and environmental receptors.
• Each phase affects bioavailability, i.e., interactions with microorganisms and exposure to human health and environmental receptors.
![Page 47: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/47.jpg)
Site Characterization• Evaluating the extent and distribution of contamination at a
site will provide important information that can be used as a basis to select specific bioremediation technologies, or to select a treatment train that represents a combination of physical/chemical and biological technologies.
• If contamination is widespread and low in concentration, then in situ treatment or natural attenuation may be feasible
• Conversely, with high concentrations of contaminants, soil excavation and placement in a confined treatment facility (CTF) or a land treatment prepared-bed reactor may be advisable.
![Page 48: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/48.jpg)
Site Characterization• Distribution of contaminants at a site is determined by the
physical and chemical properties of the contaminants and the properties of the site.
• Contaminant properties will affect whether contaminants are leachable, volatile, and/or adsorbable, and therefore will indicate which subsurface phases contain the contaminant(s).
• Physical phases containing the contaminants require evaluation of bioremediation potential. – When the physical and chemical properties are evaluated within the
context of site characteristics, a site-based waste characterization can be used to identify the phases/compartments at the site and the chemicals associated with each phase.
![Page 49: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/49.jpg)
Concept of Treatability Studies
• Treatability studies are conducted in laboratory microcosms, at pilot scale, or in the field.
• Treatability studies that examine the bioavailability of contaminants in waste matrices, potential for toxic effects of intermediate metabolites during the degradation process, and interactions between waste chemicals and organisms are desired.
• The overall goal: to develop a better understanding of factors that threaten ecosystems and human health and of chemicals and their degradation products during bioremediation so that the regulatory community can take into consideration the possibility of alternatives to complete mineralization.
![Page 50: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/50.jpg)
![Page 51: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/51.jpg)
Bioremediation
![Page 52: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/52.jpg)
Bioremediation
![Page 53: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/53.jpg)
Bioremediation
![Page 54: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/54.jpg)
Bioremediation
![Page 55: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/55.jpg)
Breakdown of Sites by Type of Contaminant
![Page 56: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/56.jpg)
Percentage of Sites Treating Each Medium
Groundwater32%
Soil59% Sediment
6%
Sludge2%
Surface Water1%
![Page 57: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/57.jpg)
Breakdown of Process by Treatment Technology
(includes laboratory-, pilot-, and full-scale)
In situ68%
Ex-situ (with reactor)
15%
Ex-situ (without reactor)
17%
![Page 58: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/58.jpg)
Top 9 BIOREMEDIATION METHODS
Solid Phase, prepared bed
11%
Soil Bioremediation
14%
Ground Water Bioremediation
14%
Bioventing25%
All Other Method11%
Attached Growth5%
Air Sparging6%
Fixed Film4% Solid Phase, pile
treatment4%
Natural Attenuation
6%
![Page 59: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/59.jpg)
![Page 60: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/60.jpg)
Why Bioremediation? III
• Frequency of Contaminant Subgroups (US EPA TIO, 1992)
![Page 61: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/61.jpg)
• US. EPA/540/N-93/001
Major Waste Types Applicable to Bioremediation
WHY BIOREMEDIATION? IV
![Page 62: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/62.jpg)
WHY BIOREMEDIATION
Cost Effectiveness of Bioremediation ($)
Method Year 1 Year 2 Year 3Incineration 5301 None None Solidification 115 None None Landfill 670 None None Thermal Desorption 200 None None Bioremediation 175 27 20
1 - costs are per cubic yard
Adapted from Cookson, 1995
![Page 63: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/63.jpg)
WHY BIOREMEDIATION? VI
• Some Other Advantages of Bioremediation• Can be done on site • Permanent elimination of waste (limiting liability) • Positive public acceptance • Minimum site disruption • Eliminates transportation cost and liability • Can be couple with other treatment techniques
Adapted from Cookson, 1995
![Page 64: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/64.jpg)
Advantages of Using Bioremediation Processes
Compared With Other Remediation Technologies
(1) biologically-based remediation detoxifies hazardous substances instead of merely transferring contaminants from one environmental medium to another;
(2) bioremediation is generally less disruptive to the environment than excavation-based processes; and
(3) the cost of treating a hazardous waste site using bioremediation technologies can be considerably lower than that for conventional treatment methods: vacuuming, absorbing, burning, dispersing, or moving the material .
![Page 65: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/65.jpg)
Effective Bioremediation, Utilizing Microbial Inoculation,
Basic and Absolutely Essential Requirements
1. Oxygen at a residual level of 1 ppm. or more 2. Essential inorganic nutrients 3. Microbes and substrate must be in contact 4. Water - either salt or fresh Other conditions must be taken into account, such as
pH, temperature, salinity, type of contaminant,
![Page 66: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/66.jpg)
POLLUTANTS
– Bio-degradable petroleum products (gas, diesel, fuel oil) •crude oil compounds (benzene, toluene, xylene, naphthalene) •some pesticides (malathion) •some industrial solvents •coal compounds (phenols, cyanide in coal tars and coke waste)
– Partially degradable / PersistentTCE (trichlorethylene) threat to ground water •PCE (perchlorethlene) dry cleaning solvent •PCB’s (have been degraded in labs, but not in field work) •Arsenic, Chromium, Selenium
– Not degradable / Recalcitrant Uranium •Mercury •DDT
![Page 67: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/67.jpg)
PAH structures
![Page 68: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/68.jpg)
Adapted from “A Citizen’s Guide to Bioremediation”, United Nation Environmental Agencies, Office of Solid Waste and Emergency Response, EPA 542-F-01-001
![Page 69: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/69.jpg)
Remediation Options for Organic Pollutants
in Soils– Containment/landfill– Thermal desorption– Advanced organic stabilisation– Mobile catalytic chemical oxidation– Bioremediation
• Landfarm• Biopile• Composting• Slurry reactors
![Page 70: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/70.jpg)
COMPARISON OF BIOREMEDIATION AND OTHER TECHNIQUES
• Soil Gas Extraction: A process by which petroleum vapors are removed from the soil using wells and vacuum pumps. Volatile compounds are extracted from the area between soil particles by applying negative pressure to screened wells in the vadose zone.
• Low Temperature Thermal Stripping: A process by which soil is excavated and fed into a mobile unit designed to heat the soil and drive off contaminates.
• Excavation: A process which involves the digging up of contaminated soils and hauling them away.
![Page 71: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/71.jpg)
TYPES OF TREATMENT TECHNOLOGY
Bioaugumentation
• the addition of naturally occuring microbes to sites
• sites can be treated with high concentrations of specific microbes
• costs little money, time and disruption• simple testing done for
biocompatibility and biodegradation efficiency
![Page 72: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/72.jpg)
TYPES OF TREATMENT TECHNOLOGY
Biostimulation
• The use of indigenous microbes • the modification of the site to promote
the growth of native microbes already present
• depends on necessary native microbial and organic material to be present
• costs little time and money • testing appropriate microbes can be
difficult and complex
![Page 73: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/73.jpg)
TECHNOLOGY-OTHER OPTIONS
Bioventing – treating soil by drawing oxygen though it to
stimulate microbe growth
Composting – contaminated soils mixed with a bulking agent and
exposed to air
Landfarming – adaptation of traditional farming techniques
(aerating, ploughing) to contaminated areas to increase microbes activity
![Page 74: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/74.jpg)
Treatment Options for Contaminated Soils
from Natusch, 1997.•Remediation Method•Excavation-landfill•Containment on-site•Landfarming/Bio•Co-burning•Stabilisation•Thermal desorption•Soil washing•Vapour extraction•Dechlorination
•% Use in Australia•60-90•10-30•15-20•<5•5-10•<5•<5•<5•<1
![Page 75: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/75.jpg)
Limitations to Bioremediation
– Timescale– Residual Contaminants Levels– Inconsistency– Recalcitrant Pollutants eg DDT, PAHs
• Bioavailability• Degrading microorganisms• Aqueous solubility• Toxicity
![Page 76: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/76.jpg)
ConclusionBIOREMEDIATION:
• Is a process which uses naturally occurring microorganisms to enhance normal biological breakdown.
• It is an effective method for treating many hazardous materials.
• Of all the different processes available for clean-up of sites, Bioremediation is the best and most cost effective method for remediation, with respect to environmental liability.
• The nature and location of the contamination, the type of soils and geological conditions, determine which method of remediation is best for each individual clean-up site.
![Page 77: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/77.jpg)
“Plan the Work, and Work the Plan” An Engineering Perspective
•Planning the Work •what is to be done •when is it to be done •how much is the scheduled cost •who will do it •Working the Plan •budgeting & scheduling control •coordinating activities across the team •How to Evaluate & Recommend the Technology •must provide a net improvement over conventional
technologies •goals must be achieved: •faster, cheaper, safer, better, etc.
Cookson, 1995
![Page 78: Lecture on Remediation](https://reader034.vdocument.in/reader034/viewer/2022051411/547e9a56b4af9f144b8b4577/html5/thumbnails/78.jpg)
END OF INTRODUCTION TO BIOREMEDIATION