® 2011 Generation Brands

LED PAR30 @ a Glance

75W PAR30 Halogen Equiv.

SGL P/N 97314S

Light output (lumens) 725

Power 15W

Efficacy 48 lpw

CRI 85

Color Temp* 3000K

Beam angle 40

Life (hours) 50K

Dimmable Yes

Rating Wet

Where to Use

• Any SGL recessed 5” or 6” housings and trims qualified for 75W PAR30, except enclosed shower trim

• Wet listed, can be used outdoor in just a par holder• Great performer vs. halogen equivalent• LRG, New catalog and website will list upgrade options with all

compatible fixtures/trims

LED1

® 2011 Generation BrandsLED

LED PAR30 @ a Glance

2

® 2011 Generation Brands

Dimmer Compatibility – LED PAR30 97314S, 97414S

Make Models

Lutron ADRIANI AYLV-600; Commercial Systems QSG-6P, LP-RPM-4A-120, HW/LP-RPM-4U-120; Diva DV-600, DVLV-600; Interfaces PHP, PHPM-WBX w/DVF-103P; Homeworks HW-RPM-4-U-120, HxD-6ND; Panel Module CTCL-153P, TTCL-100D, Grafik Eye; Radio Ra RRD-10ND, RRD-6NA; Stanza SZ-6ND; Lutron RRD-10ND, SZ-6ND, HW-RPM-4A-120, HxD-6ND, S-600PR-WH, DV-600PR-WH, TG600PR-WH, Q600P, GL-600, CN-600PWH, DV-603PG, S-600, S-600P, LG-600P, D-600PH, TT-300NLH, TG-603PG, DV-600PR-WH

Others Ace 34050, 3027596; Leviton 6633-PL, 6684, 6631, IPI06-1LX, Legrand DrRD4W

* Note – Dimmer listing is subject to change. Dimmer compatibility list indicates those dimmers that have been tested and operate properly under normal conditions. In certain cases, approved dimmers are offered in higher wattage varieties that are also compliant and allow for further installation of additional lamps if kept within the maximum in-rush current equivalent noted in the table above. Each application is unique and various factors such as load, common neutrals and other electrical products on the circuit may cause variance in performance. Consult dimming system manufacturer for additional support in operation.

Dimmable down to 5% of light output

1

SGL LED Lamp In-Rush Current Equivalent

Max # of Lampsper 600 watt Dimmer

LED PAR30 97314S, 97414S 115 Watts 5

Recommended Number of Lamps per 600W Dimmer* While an LED lamp may draws as few as 15 watts continuously, it could have an in-rush current spike and should therefore be treated as a 115W load when sizing dimmers. The recommended number of lamps that should be used on a typical approved dimmers is as follows.