led powerpoint
DESCRIPTION
can teach u the basics of LED structure and its constructionin VLSI,,,,,,,TRANSCRIPT
![Page 1: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/1.jpg)
LED CharacteristicsEBB 424ELecture 4– LED 3Dr Zainovia Lockman
![Page 2: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/2.jpg)
Last Lectures..
Applications of LEDApplications of LED
LED ConfigurationLED Configuration
How does LED Works?
P-n diode, radiative transmission
How does LED Works?
P-n diode, radiative transmission
Materials Requirements
Materials Requirements
Candidate MaterialsCandidate Materials
Designing efficientLED
Designing efficientLED
Epitaxial growthRight Eg
Epitaxial growthRight Eg
UV, VIS,IR LED
UV, VIS,IR LED
Band-gap engineeringBand-gap
engineering
LED I&2 GaAsPGaAsP:NGaAsP
GaAsP:N
Definition of LEDDefinition of LED
Group III-VGroup II-VGroup III-VGroup II-V
![Page 3: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/3.jpg)
LED Construction – Aim – 100% light emitting efficiency
◘ Important consideration - radiative recombination must take place from the side of the junction nearest to the surface to reduce reabsorption.
◘ Carrier from n must be injected into the p-side efficiently.
◘ Consider the fraction of the total diode current that is carried by electrons being injected into the p-side of the junction (e)
![Page 4: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/4.jpg)
Why n+-p?
e = Denp/Le
Denp/Lp + Dhpn/Lh
Or e = DhpnLe
DennLp
e= ennLp
1+ hpnLe
If we use Einstein’s equation to substitute this equation. Then,
III-V compounds, III-V compounds, ee >> >> hh then, ee needs to be needs to be close to unity. This can close to unity. This can be circumvent by doping be circumvent by doping n with more electrons (n n with more electrons (n >> p)>> p)
If (nIf (nnn >> p >> pnn) = one sided ) = one sided junction njunction n++ -p diode -p diode
![Page 5: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/5.jpg)
Typical exam question
Justify the reason why in a typical construction of an LED, the n side in the p-n diode must be made heavily doped. (50 marks)
![Page 6: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/6.jpg)
LED Characteristic
The energy of an emitted photon = to the size of the band gap
BUT this is a simplified statement. The energy of an emitted photon from LED is
distributed appropriately according to the energy distribution of electrons on the conduction band and holes in the valance band.
You need to know the distribution of electrons and holes in the CB and VB respectively.
![Page 7: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/7.jpg)
Calculation I. LED Output spectrum (Kasap)
![Page 8: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/8.jpg)
Calculation II. Output wavelength variations (Kasap)
![Page 9: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/9.jpg)
Calculation III. InGaAs on InP substrate (Kasap)
![Page 10: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/10.jpg)
The quantum efficiency
• Internal quantum efficiency can of some LED approaches 100% but the external efficiencies are much lower. This is due to reabsorption and TIR.
• III-V materials have small critical angles therefore the radiation emitted suffers from TIR
%100xIV
)optical(Poutputexternal
![Page 11: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/11.jpg)
Recap- Total Internal Reflection
Incident beam
TIR
![Page 12: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/12.jpg)
Why do we need the dome?
n+
ElectrodesElectrodes
Pn junction
Plastic dome
Semiconductor material is shaped like a hemisphere
to reduce TIR…
p
![Page 13: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/13.jpg)
How to solve TIR problem
• GaAs-air interface, the C = 16o which means that much of the light suffers TIR.
• To solve the problem we could:1. Shape the surface of the semiconductor into a dome
or hemisphere so that light rays strike the surface angles < C therefore does not experience TIR. But expensive and not practical to shape p-n junction with dome-like structure.
2. Encapsulation of the semiconductor junction within a dome-shaped transparent plastic medium (an epoxy) that has higher refractive index than air.
![Page 14: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/14.jpg)
Calculation IV. Calculating C
If we take a GaAs/air interface where n i = 3.6 and n2 = 1, what is the critical angle, C?.
C = sin-1 (n2/n1)
![Page 15: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/15.jpg)
Fraction of light being emitted, F
• If light is isotropically generated in a medium then the fraction transmitted to the outside world is given by:
![Page 16: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/16.jpg)
Calculation V. Fraction of light being emitted
![Page 17: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/17.jpg)
LED
Str
uct
ure
![Page 18: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/18.jpg)
Basic Layer by Layer Structure
LED 1. Surface emitter
2. Edge emitter
![Page 19: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/19.jpg)
1. Surface Emitter
• In surface emitter the emitting area is defined by oxide isolation, with the metal contact area a circle of diameter ~ 10m-15 m.
• The surface layer is kept as thin as possible (10-15 m) to minimise reabsorbtion
![Page 20: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/20.jpg)
Homo- and Hetro-Junction
• Homojunction = a p-n junction made out of two differently doped semiconductors that are of the same material (i.e having the same band gap).
• Heterojunction = junction formed between two different band gaps semiconductors.
• Heterostructure device = semiconductor device structure that has junctions between different bandgap materials.
![Page 21: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/21.jpg)
Why Homojunction is bad?
1. Shallow p-region narrow to allow photons to escape without reabsorption.
– If the p-region is too shallow, electrons can escape the p-region by diffusion and recombine through crystal defect in the surface of the layer.
– This recombination is non-radiative and decreases the efficiency of the LED.
2. Thick p–region then reabsoprtion will be the main problem as the photons will have a long way to go before can be successful emitted.
Create a heterojunction instead since heterojunction solves: Reabsoption problem (photon confinement) Also carrier confinement
![Page 22: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/22.jpg)
Band-gap and refractive index engineering.
Heterostructured LED
Avoiding losses in LED
Carrier confinement
Carrier confinement
Photon Confinement
Photon Confinement
![Page 23: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/23.jpg)
Double heterostructure
Burrus type LED
Shown bonded to a fiber with index-matching epoxy.
Double Heterojunction LED (important)
n+ GaAs
p Al GaAs
p GaAs (active region)n AlGaAs
Metal contact
Metal contact
Epoxy
Fiber Optics
![Page 24: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/24.jpg)
Double Heterostructure• The double heterostructure is invariably used
for optical sources for communication as seen in the figure in the pervious slide.
• Heterostucture can be used to increase:– Efficiency by carrier confinement (band gap
engineering)– Efficiency by photon confinement (refractive index)
• The double heterostructure enables the source radiation to be much better defined, but further, the optical power generated per unit volume is much greater as well. If the central layer of a double heterostructure, the narrow band-gap region is made no more than 1m wide.
![Page 25: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/25.jpg)
Photon confinement - Reabsorption problem
Source of electrons
Source of holes
Active region (micron in thickness)
Active region (thin layer of GaAs) has smaller band gap, energy of photons emitted is smaller then the band gap of the P and N-GaAlAs hence could not be reabsorbed.
![Page 26: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/26.jpg)
Reabsorption ProblemIn order to prevent reabsorption, the upper layer (one that is above the active region) needs to have higher band gap therefore the emitted photons will not be absorbed by the upper layer (photons will be absorbed when Ep < Eg).
2eV1.4eV
n-AlGaAs p-GaAs
Active region – Photons will not be absorbed by the n-AlGaAs since the band gap is much higher than GaAs
p-AlGaAs
n+ GaAs
p Al GaAs
p GaAs (active region)n AlGaAs
Metal contact
Metal contact
Epoxy
![Page 27: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/27.jpg)
Carrier confinement
p+-AlGaAsn+-AlGaAs p-GaAsholes
electrons
Simplified band diagram of the ‘sandwich’ top show carrier confinement
![Page 28: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/28.jpg)
Burrus-Type LED
![Page 29: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/29.jpg)
Communication LED
![Page 30: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/30.jpg)
Typical Exam Question
Sketch a typical surface emitted LED that can emit red light. Explain why for such configuration, the light source can be suitable for optical communication. Start your answer with the reasons why photon and carrier confinement are needed. (80 marks)
![Page 31: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/31.jpg)
2. Edge Emitter
In edge emitter a double heterostructure band gap engineering is used to achieve carrier confinement and recombination in an active layer but in addition layers of relatively low refractive index are included to produce optical guide. A large fraction of the photons are therefore confined between two ‘plates’ of material and emerge at the edge of the device as highly directional flux compatible with coupling to a fibre optic cable.
![Page 32: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/32.jpg)
Edge emitter using double heterostructure
Active layer n- GaAlAsN GaAlAsN+- GaAlAs
GaAs(n) substrate
Metal contact
Metal contact
P GaAlAsP+ GaAlAs
n- GaAlAsLight emits
from the edge
![Page 33: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/33.jpg)
The waveguide
We can use refractive index engineering to create a multilayer structure in which light can be trapped within the central layers. This layer act as waveguide. (TIR is used in Edge Emitter)
![Page 34: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/34.jpg)
Contact Layer
Cladding Layer
Cladding Layer
Active Layer
SubstrateEp
i gro
wth
![Page 35: Led powerpoint](https://reader033.vdocument.in/reader033/viewer/2022061117/54686ba7b4af9fe7768b489a/html5/thumbnails/35.jpg)
Another Example of Edge Emitter