0.47 hrs

1 pcs

f

0.20 mm

k

0.40 mm

h

1

4.00 g

d

Prusa MINI

Summary

This is a LEGO Minifigure Wall Mount which I recreated and adapted for myneeds in Tinkercad ( https://www.tinkercad.com/things/2URlnLa77qX ).

This should also allow anyone else to make some adjustments if needed.

I created multiple versions of the wall mount, different versions to mountthem, different baseplates and stud sizes. The version with the largerstuds even holds the minifigures without an additional base blade.

Toys & Games > Other Toys & Games

stand minifigure minifig lego

Before you start printing dozens of them, make a test-print, compare themeasurements of the design with the printed object and adjust the printsettings.

herbert

LEGO MinifigureWall Mount withlarger Studs

VIEW IN BROWSER

updated 15. 6. 2020 | published 15. 6. 2020

Print Files (.gcode) DOWNLOAD ALL FILES

299.3 KB

0.47 hrs f 0.20 mm k 0.40 mm h PLA 3.80 g d PrusaMINI

updated 15. 6. 2020

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

15.0 KBupdated 15. 6. 2020

27.6 KBupdated 15. 6. 2020

24.6 KBupdated 15. 6. 2020

I had to increase my print values by approximately 1% in all dimensions toget the perfect result.

This is very important, 0.1-0.2 mm make a difference in holding theminifigure properly without the need of a base blade.

This remix is based on

LEGO Minifigure Wall Mount / Shelf

by misterT

Find source .stl files on Thingiverse.com

lego-minifigure-wall-mount-2-big-studs_02mm_pla.gcode

lego-minifigure-wall-mount-2-big-studs.stl

lego-minifigure-wall-mount-4-big-studs.stl

lego-minifigure-wall-mount-big-studs.3mf

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution-NonCommercial

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition