MAKE WAY FOR THE NEW GENERATION

LESS DRAFT AND LESS DOWNTIME WITH THE NEW GENERATION TIGER POINT.

INTRODUCING THE NEW

GENERATION TIGER POINT.

The unique “lift, twist and roll” capability of Case IH Tiger Points aggressively fractures tough compaction. The sturdy alloy-steel construction of the new generation Tiger Point is based on years of in-depth research on tillage and planting agronomics.

Our testing shows the new generation Tiger Point creates less draft than competitive points, which results in reduced fuel consumption. With a fresh, innovative design, the new generation Tiger Point is two times more wear-resistant than previous versions—which means less downtime and more field time.

To learn more, visit BeRedandReady.com/Tiger.

©2014 CNH Industrial America LLC. All rights reserved. Case IH is a trademark registered in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates. www.CaseIH.com

Watch the video to learn more about the new generation Tiger Point and the full Tiger Point line.

NEW GENERATION TIGER POINTPart No. 47465172• 7-inch wing

• 1.25-inch shank

• Lasts two and a half times longer than previous versions

A leading factor in crop-yield reduction is soil compaction, but most points do little to alleviate it. Case IH Tiger Points are different—and it’s all about the lift, twist and roll:

LIFT. The tip starts the fracturing by lifting the compacted soil.

TWIST. The front area of the wing starts the twisting action, which relocates soil layers and prevents immediate re-compaction.

ROLL. The back of the wings and the shank finish the job by rolling the soil to incorporate fertilizer and residue.

LIFT. TWIST. ROLL.KILL COMPACTION—ONE TIGER POINT AT A TIME.

NOT ALL TILLAGE PRODUCTS ARE CREATED EQUAL.

Earth Metal® disk blades, openers and sweeps are stronger, sharper and longer-wearing than conventional blades, meaning fewer headaches in the field—and fewer unnecessary risks to your profit.

The superior design of Earth Metal products is based on years of in-depth research on tillage and planting agronomics—the science behind maximum yields. Earth Metal products are designed to withstand the impact of rocks and other obstacles without shattering or breaking. Less breakage means more efficient tillage, seedbed preparation and planting—which mean higher yields and higher profits for your operation.

Visit BeRedandReady.com to learn more about our full line of Earth Metal products.

Watch the video to learn more about Earth Metal.

10” (254mm) STANDARD TIGER POINTSPart No. 87460072Part No. 87460159 (replaceable Tiger Point – tip and wing)Part No. 87412311 (replaceable tip)Part No. 09907002 (replaceable wing – right)Part No. 09907003 (replaceable wing – left)• 10-inch (254mm) wingspan

• Fracture 50 percent to 70 percent

• Remaining residue 70 percent to 85 percent

• 4-inch to 6-inch (102 to 152mm) ridges

• Operating depth 8 inches to 16 inches (203 to 406mm)

8" (203mm) NO-TILL POINTPart No. 87388006• 8-inch (203mm) wingspan

• Fracture 25 percent to 50 percent

• Remaining residue 70 percent to 95 percent

• 0-inch to 2-inch (0 to 51mm) ridges

• Operating depth 8 inches to 16 inches (203 to 406mm)

• Mounts on no-till shank only

7" (178mm) TIGER POINTSPart No. 87460070 (1 ¼-inch shank)Part No. 87460074 (1 ½-inch shank)Part No. 87460158 (replaceable Tiger Point – tip and wing)Part No. 87412311 (replaceable tip)• 7-inch (178mm) wingspan

• Fracture 30 percent to 60 percent

• Remaining residue 70 percent to 90 percent

• 2-inch to 4-inch (51 to 102mm) ridges

• Operating depth 8 inches to 14 inches (203 to 356mm)

5" (127mm) TIGER POINTPart No. 87460069• 5-inch (127mm) wingspan

• Fracture 30 percent to 50 percent

• Remaining residue 70 percent to 90 percent

• 2-inch to 4-inch (51 to 102mm) ridges

• Operating depth 8-inch to 14-inch (203 to 356mm)

2" (51mm) TIGER POINTSPart No. 87460075 (1 ¼-inch shank)Part No. 87460071 (1 ½-inch shank)• Fracture less than 30 percent

• Remaining residue 80 percent to 90 percent

• 2-inch to 4-inch (51 to 102mm) ridges

• Operating depth 8 inches to 14 inches (203 to 356mm)

ORIGINAL TIGER POINTS

SEE YOUR LOCAL CASE IH DEALER FOR THE FULL LINE OF CASE IH TIGER POINTS.

SEE BACK FOR NEW GENERATION

TIGER POINT.