lesson 1 overview of manufacturing
DESCRIPTION
manufacturingTRANSCRIPT
LESSON 1:
COURSE OVERVIEW
INTRODUCTION TO MANUFACTURING
DR HERBERT MAPFAIRA27/01/2014w
DR HERBERT MAPFAIRA
B.ENG. INDUSTRIAL ENGINEERING
MSC. MANUF. SYSTEMS ENG.
PHD. MANUF. ENG. & OPERATIONS MANAGEMENT
12 YEARS WORKING FOR PUBLIC SECTOR – UK
1 YEAR WORKING FOR TOYOTA – UK
2 YEARS MANAGEMENT CONSULTING - UKw
TODAY’S AGENDA
Information on syllabusOffice hoursTextGradingExams & HomeworkClass format
Start course material Lesson 1 – Overview of Manufacturing
OFFICE HOURS
By appointment. Office 248/181 Phone: 355-4301 E-mail: [email protected]
COURSE INFORMATION
Course homepage: Blackboard Syllabus Handouts
This introductory presentation Some lecture material
Homework assignments Project information Announcements
Check the page for course information and announcements
TEXTBOOK
Course Textbook: M. P. Groover, Principles of Modern
Manufacturing: SI Version [Paperback]
ASSESSMENT CRITERIA
Component Percentage %
Assignments (2 x
5%)
Quizzes
Lab experiments
10 %
Mini-project
(Workshop)
10 %
Tests (2 x 10%) 20 %
Final Examination 60 %
CLASSROOM RULES
Turn off cell phones and other communication devicesNo completing homework or other assignments
Use common sense and be considerate of othersNotify instructor when absent from class as soon as possible
Before or after the factJustifiable reason
LECTURE FORMAT
The first part of class will be devoted to questions. Unreasonably long questions will be handled one on
one. If I don’t know the answer, I’ll get it for the class by
the next lecture. Lecture
Ask questions End of Class – Will try to leave time for
questions
LECTURE FORMAT
Most material will be delivered There will be periodic in-class problem
solving sessions.
Any Questions ?
LESSON OUTLINE
1. What is manufacturing?
2. Importance of manufacturing
3. Manufacturing Industries and Products
4. Materials in Manufacturing
5. Manufacturing Operations
6. Production Facilities
7. Product/Production Relationships
8. Lean Production
O
Ok, shall we start now!
©2010 John Wiley & Sons, Inc. M P Groover, Fundamentals of Modern Manufacturing 4/e
What is Manufacturing?
The word manufacture is derived from two Latin words manus (hand) and factus (make); the combination means “made by hand”
“Made by hand” accurately described the fabrication methods that were used when the English word “manufacture” was first coined around 1567 A.D.
Most modern manufacturing operations are accomplished by mechanized and automated equipment that is supervised by human workers
Manufacturing can be defined in two ways, one technological, and the other economic.
©2010 John Wiley & Sons, Inc. M P Groover, Fundamentals of Modern Manufacturing 4/e
Manufacturing - Technological
Application of physical and chemical processes to alter the geometry, properties, and/or appearance of a starting material to make parts or products– The processes to accomplish manufacturing involve a combination of
machinery, tools, and manual labor.– Manufacturing is always carried out in a sequence of operations. Each
operation bringing the material closer to the desired final stage.
©2010 John Wiley & Sons, Inc. M P Groover, Fundamentals of Modern Manufacturing 4/e
Manufacturing - Economic Transformation of materials into items of greater value by
one or more processing and/or assembly operations Manufacturing adds value to the material by changing is
shape or properties or by combining it with other materials that have been similarly altered.
Materials are made more valuable through manufacturing operations performed on them:
When iron is converted to steel, value is added;
When sand is converted to glass, value is added.
When petroleum is converted to plastic, value is added; and when plastic is converted to more complex shapes, even more value is added
Why do you think manufacturing is important?
©2010 John Wiley & Sons, Inc. M P Groover, Fundamentals of Modern Manufacturing 4/e
Manufacturing is Important
Making things has been an essential human activity since before recorded history
Today, the term manufacturing is used for this activity
Manufacturing is important: Technologically Economically
©2010 John Wiley & Sons, Inc. M P Groover, Fundamentals of Modern Manufacturing 4/e
Technological Importance
Technology - the application of science to provide society and its members with those things that are needed or desired
Technology provides the products that help our society and its members live better
What do these products have in common? They are all manufactured
Manufacturing is the essential factor that makes technology possible
©2010 John Wiley & Sons, Inc. M P Groover, Fundamentals of Modern Manufacturing 4/e
Economic Importance
U.S. EconomySector: %GDPAgriculture and natural resources 5Construction and public utilities 5Manufacturing 15Service industries* 75
100* includes retail, transportation, banking,
communication, education, and government
©2010 John Wiley & Sons, Inc. M P Groover, Fundamentals of Modern Manufacturing 4/e
Manufacturing Industries
The type of manufacturing done by a company depends on the kind of product it makes.
Industry consists of enterprises and organizations that produce or supply goods and services
Let us explore this relationship by first examining the types of industries in manufacturing and then identifying the products they make
Industries can be classified as:1. Primary industries - cultivate and exploit natural resources, e.g.,
agriculture, mining
2. Secondary industries - take the outputs of primary industries and convert them into consumer and capital goods
3. Tertiary industries - service sector
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 22/37
More Industry Classifications
Process industries, e.g., chemicals, petroleum, basic metals, foods and beverages, power generation Continuous production Batch production
Discrete product (and part) industries, e.g., cars, aircraft, appliances, machinery, and their component parts Continuous production Batch production
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 23/37
Process Industries and Discrete Manufacturing Industries
©2010 John Wiley & Sons, Inc. M P Groover, Fundamentals of Modern Manufacturing 4/e
Specific Industries in Each Category
©2010 John Wiley & Sons, Inc. M P Groover, Fundamentals of Modern Manufacturing 4/e
Manufactured Products
Final products divide into two major classes:1. Consumer goods - products purchased directly by
consumers Cars, clothes, TVs, tennis rackets
2. Capital goods - those purchased by companies to produce goods and/or provide services Aircraft, computers, communication
equipment, medical apparatus, trucks, machine tools, construction equipment
©2007 John Wiley & Sons, Inc. M P Groover, Fundamentals of Modern Manufacturing 3/e
Manufacturing Capability
A manufacturing plant consists of processes and systems (and people, of course) designed to transform a certain limited range of materials into products of increased value
The three building blocks ‑ materials, processes, and systems ‑ are the subject of modern manufacturing
Manufacturing capability includes:
1. Technological processing capability
2. Physical product limitations
3. Production capacity
©2007 John Wiley & Sons, Inc. M P Groover, Fundamentals of Modern Manufacturing 3/e
1. Technological Processing Capability
The available set of manufacturing processes in the plant (or company)
Certain manufacturing processes are suited to certain materials By specializing in certain processes, the plant is also
specializing in certain materials Includes not only the physical processes, but also the
expertise of the plant personnel Examples:
A machine shop cannot roll steel A steel mill cannot build cars
©2007 John Wiley & Sons, Inc. M P Groover, Fundamentals of Modern Manufacturing 3/e
2. Physical Product Limitations
Given a plant with a certain set of processes, there are size and weight limitations on the parts or products that can be made in the plant
Product size and weight affect: Production equipment Material handling equipment
Production, material handling equipment, and plant size must be planned for products that lie within a certain size and weight range
©2007 John Wiley & Sons, Inc. M P Groover, Fundamentals of Modern Manufacturing 3/e
3. Production Capacity
Defined as the maximum quantity that a plant can produce in a given time period (e.g., month or year) under assumed operating conditions
Operating conditions refer to number of shifts per week, hours per shift, direct labor manning levels in the plant, and so on
Usually measured in terms of output units, such as tons of steel or number of cars produced by the plant
Also called plant capacity
©2007 John Wiley & Sons, Inc. M P Groover, Fundamentals of Modern Manufacturing 3/e
Materials in Manufacturing
Most engineering materials can be classified into one of three basic categories:
1. Metals
2. Ceramics
3. Polymers Their chemistries are different Their mechanical and physical properties are
dissimilar These differences affect the manufacturing
processes that can be used to produce products from them
What typical operations are you likely to find in manufacturing?
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 32/37
Manufacturing Operations
There are certain basic activities that must be carried out in a factory to convert raw materials into finished products
For discrete products:
1. Processing
2. Assembly operations
3. Material handling
4. Inspection and testing
5. Coordination and controlA processing operation transforms a work material from one state of
completion to a more advanced state using energy to alter its shape,
properties or appearance to add value to the material.
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 33/37
Fig. 2.3
Classification of manufacturing processes
©2007 John Wiley & Sons, Inc. M P Groover, Fundamentals of Modern Manufacturing 3/e
Processing Operations
Alters a material’s shape, physical properties, or appearance in order to add value
Three categories of processing operations:
1. Shaping operations - alter the geometry of the starting work material
2. Property‑enhancing operations - improve physical properties without changing shape
3. Surface processing operations - to clean, treat, coat, or deposit material on exterior surface of the work
©2007 John Wiley & Sons, Inc. M P Groover, Fundamentals of Modern Manufacturing 3/e
Shaping Processes – Four Categories
1. Solidification processes - starting material is a heated liquid or semifluid
2. Particulate processing - starting material consists of powders
3. Deformation processes - starting material is a ductile solid (commonly metal)
4. Material removal processes - starting material is a ductile or brittle solid
©2007 John Wiley & Sons, Inc. M P Groover, Fundamentals of Modern Manufacturing 3/e
Waste in Shaping Processes
Desirable to minimize waste in part shaping Material removal processes are wasteful in unit
operations, simply by the way they work Most casting, molding, and particulate processing
operations waste little material Terminology for minimum waste processes:
Net shape processes - when most of the starting material is used and no subsequent machining is required
Near net shape processes - when minimum amount of machining is required
©2007 John Wiley & Sons, Inc. M P Groover, Fundamentals of Modern Manufacturing 3/e
Property‑Enhancing Processes
Performed to improve mechanical or physical properties of work material
Part shape is not altered, except unintentionally Example: unintentional warping of a heat treated
part Examples:
Heat treatment of metals and glasses Sintering of powdered metals and ceramics
©2007 John Wiley & Sons, Inc. M P Groover, Fundamentals of Modern Manufacturing 3/e
Surface Processing Operations
Cleaning - chemical and mechanical processes to remove dirt, oil, and other contaminants from the surface
Surface treatments - mechanical working such as sand blasting, and physical processes like diffusion
Coating and thin film deposition - coating exterior surface of the workpart
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 39/37
Assembly Operations
Joining processes Welding Brazing and soldering Adhesive bonding
Mechanical assembly Threaded fasteners (e.g., bolts and nuts, screws) Rivets Interference fits (e.g., press fitting, shrink fits) Other
An assembly operation joins two or more components to create
a new entity which is called an assembly, subassembly, etc.
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 40/37
Other Factory Operations
Material handling and storage Inspection and testing Coordination and control
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 41/37
Material Handling
““A means of moving and storing materials between processing A means of moving and storing materials between processing and/or assembly operations”and/or assembly operations”
Material transport Vehicles, e.g., forklift trucks, AGVs, monorails Conveyors Hoists and cranes
Storage systems Unitizing equipment Automatic identification and data capture (AIDC)
Bar codes RFID Other AIDC equipment
In manufacturing a product, how much time in percentage do you think is spend in actual processing of the product?
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 43/37
Time Spent in Material Handling
Fig. 2.4
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 44/37
Inspection and Testing
Inspection – examination of the product and its components to determine whether they conform to design specifications Inspection for variables - measuring Inspection of attributes – gaging
Testing – observing the product (or part, material, subassembly) during actual operation or under conditions that might occur during operation
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 45/37
Coordination and Control
Regulation of the individual processing and assembly operations Process control Quality control
Management of plant level activities Production planning and control Quality control
©2007 John Wiley & Sons, Inc. M P Groover, Fundamentals of Modern Manufacturing 3/e
Production Systems
People, equipment, and procedures used for the combination of materials and processes that constitute a firm's manufacturing operations
A manufacturing firm must have systems and procedures to efficiently accomplish its type of production
Two categories of production systems: Production facilities Manufacturing support systems
Both categories include people (people make the systems work)
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 47/37
Production Facilities
A manufacturing company attempts to organize its facilities in the most efficient way to serve the particular mission of the plant
Certain types of plants are recognized as the most appropriate way to organize for a given type of manufacturing
The most appropriate type depends on: Types of products made Production quantity Product variety
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 48/37
Production Quantity
Number of units of a given part or product produced annually by the plant
Three quantity ranges:
1. Low production – 1 to 100 units
2. Medium production – 100 to 10,000 units
3. High production – 10,000 to millions of units
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 49/37
Product Variety
““Refers to the number of different product or part Refers to the number of different product or part designs or types produced in the plantdesigns or types produced in the plant””
Inverse relationship between production quantity and product variety in factory operations
Product variety is more complicated than a number Hard product variety – products differ greatly
Few common components in an assembly Soft product variety – small differences between
products Many common components in an assembly
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 50/37
Product Variety vs. Production Quantity
Fig. 2.5
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 51/37
Low Production Quantity
Job shopJob shop – makes low quantities of specialized and customized products
Also includes production of components for these products
Products are typically complex (e.g., specialized machinery, prototypes, space capsules)
Equipment is general purpose Plant layouts:
Fixed position Process layout
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 52/37
Fixed-Position Layout
Fig. 2.6 (a)
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 53/37
Process Layout
Fig. 2.6 (b)
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 54/37
Medium Production Quantities
1.1. Batch productionBatch production – A batch of a given product is produced, and then the facility is changed over to produce another product Changeover takes time – setup time Typical layout – process layout Hard product variety
2.2. Cellular manufacturingCellular manufacturing – A mixture of products is made without significant changeover time between products Typical layout – cellular layout Soft product variety
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 55/37
Cellular Layout
Fig. 2.6 (c)
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 56/37
High Production (mass production)
1.1. Quantity productionQuantity production – Equipment is dedicated to the manufacture of one product Standard machines tooled for high production (e.g.,
stamping presses, molding machines) Typical layout – process layout
2.2. Flow line productionFlow line production – Multiple workstations arranged in sequence Product requires multiple processing or assembly
steps Product layout is most common
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 57/37
Product Layout
Fig. 2.6 (d)
©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher. For the exclusive use of adopters of the book
Automation, Production Systems, and Computer-Integrated Manufacturing, Third Edition, by Mikell P. Groover. 58/37
Relationships between Plant Layout and Type of Production Facility
Fig. 2.7
©2007 John Wiley & Sons, Inc. M P Groover, Fundamentals of Modern Manufacturing 3/e
Example of Processes
A spectacular scene in steelmaking is charging of a basic oxygen furnace, in which molten pig iron produced in a blast furnace is poured into the BOF. Temperatures are around 1650°C (3000 ° F).
©2007 John Wiley & Sons, Inc. M P Groover, Fundamentals of Modern Manufacturing 3/e
A machining cell consisting of two horizontal machining centers supplied by an in-line pallet shuttle (photo courtesy of Cincinnati Milacron).
©2007 John Wiley & Sons, Inc. M P Groover, Fundamentals of Modern Manufacturing 3/e
A robotic arm performs unloading and loading operation in a turning center using a dual gripper (photo courtesy of Cincinnati Milacron).
©2007 John Wiley & Sons, Inc. M P Groover, Fundamentals of Modern Manufacturing 3/e
Metal chips fly in a high speed turning operation performed on a computer numerical control turning center (photo courtesy of Cincinnati Milacron).
©2007 John Wiley & Sons, Inc. M P Groover, Fundamentals of Modern Manufacturing 3/e
Photomicrograph of the cross section of multiple coatings of titanium nitride and aluminum oxide on a cemented carbide substrate (photo courtesy of Kennametal Inc.).
©2007 John Wiley & Sons, Inc. M P Groover, Fundamentals of Modern Manufacturing 3/e
A batch of silicon wafers enters a furnace heated to 1000°C (1800°F) during fabrication of integrated circuits under clean room conditions (photo courtesy of Intel Corporation).
©2007 John Wiley & Sons, Inc. M P Groover, Fundamentals of Modern Manufacturing 3/e
Two welders perform arc welding on a large steel pipe section (photo courtesy of Lincoln Electric Company).
©2007 John Wiley & Sons, Inc. M P Groover, Fundamentals of Modern Manufacturing 3/e
Automated dispensing of adhesive onto component parts prior to assembly (photo courtesy of EFD, Inc.).
©2007 John Wiley & Sons, Inc. M P Groover, Fundamentals of Modern Manufacturing 3/e
Assembly workers on an engine assembly line (photo courtesy of Ford Motor Company).
©2007 John Wiley & Sons, Inc. M P Groover, Fundamentals of Modern Manufacturing 3/e
Assembly operations on the Boeing 777 (photo courtesy of Boeing Commercial Airplane Co.).