lesson2 how motherboards work

61
Motherboards How Motherboards Work

Upload: jecka-cortez

Post on 13-Nov-2014

4.234 views

Category:

Technology


6 download

DESCRIPTION

 

TRANSCRIPT

Page 1: Lesson2   how motherboards work

Motherboards How Motherboards Work

Page 2: Lesson2   how motherboards work

2

Motherboards • Introduction To Motherboards

• Form Factor

• Sockets and CPUs

• Chipsets

• Bus Speed

• Memory

• Motherboard Power Connector.

• Slots And Ports On Motherboard.

Page 3: Lesson2   how motherboards work

3

Motherboard The motherboard is the main printed circuit

board and contains the buses, or electrical pathways, found in a computer. These buses

allow data to travel between the various components that comprise a computer.

A motherboard is also known as the system board, the backplane, or the main board.

Page 4: Lesson2   how motherboards work

4

Motherboard The motherboard accommodates the central

processing unit (CPU), RAM, expansion slots, heat sink/fan assembly, BIOS chip, chip set, and the embedded wires that interconnect the motherboard components. Sockets, internal and external connectors, and various ports are also placed on the motherboard.  

Page 5: Lesson2   how motherboards work

5

Motherboard

SpecificationsForm Factor: Micro ATX, uATX

Processor Socket:  Intel

Processor Interface:  LGA1156

Processors Supported:

  Intel Core

i7  Intel Core i5

Page 6: Lesson2   how motherboards work

6

Motherboard

Specifications

•Form Factor : ATX .

• Processor Socket:  Intel

•Processor interface : socket 775

•  Processors Supported: 

Intel Pentium D 

Intel Pentium EE 

Intel Core 2 Duo

  Intel Core 2 Extreme

  Intel Core 2 Quad 

Intel Pentium Dual Core

  Intel Penryn

Page 7: Lesson2   how motherboards work

7

Motherboards Form Factor

The form factor of motherboards pertains to the size and shape of the board.

It also describes the physical layout of the different components and devices on the motherboard.

The form factor affects where individual components go and the shape of the computer's case. There are several specific form factors that most PC motherboards use so that they can all fit in standard cases.

Page 8: Lesson2   how motherboards work

8

Various Form Factors Exist For Motherboards

AT – Advanced Technology ATX – Advanced Technology Extended Mini-ATX – Smaller footprint of ATX Micro-ATX – Smaller footprint of ATX LPX – Low-profile Extended NLX – New Low-profile Extended BTX – Balanced Technology Extended

Page 9: Lesson2   how motherboards work

9

Motherboards Form Factor

The form factor is just one of the many standards that apply to motherboards. Some of the other standards include:

The socket for the microprocessor determines what kind of Central Processing Unit (CPU) the motherboard uses.

The chipset is part of the motherboard's logic system and is usually made of two parts -- the northbridge and the southbridge. These two "bridges" connect the CPU to other parts of the computer.

The Basic Input/Output System (BIOS) chip controls the most basic functions of the computer and performs a self-test every time you turn it on. Some systems feature dual BIOS, which provides a backup in case one fails or in case of error during updating.

The real time clock chip is a battery-operated chip that maintains basic settings and the system time.

Page 10: Lesson2   how motherboards work

10

Sockets and CPUs

Socket 775

LGA 1156 Socket

Page 11: Lesson2   how motherboards work

11

Sockets and CPUs The central processing unit (CPU) is considered the

brain of the computer. It is sometimes referred to as the processor.

Most calculations take place in the CPU. the CPU is the most important element of a computer system.

CPUs come in different form factors, each style requiring a particular slot or socket on the motherboard. Common CPU manufacturers include Intel and AMD

Page 12: Lesson2   how motherboards work

12

Sockets and CPUs The CPU socket or slot is the connector that interfaces

between the motherboard and the processor itself.

Most CPU sockets and processors in use today are built around the pin grid array (PGA) architecture, in which the pins on the underside of the processor are inserted into the socket, usually with zero insertion force (ZIF).

ZIF refers to the amount of force needed to install a CPU into the motherboard socket or slot. Slot-based processors are cartridge-shaped and fit into a slot that looks similar to an expansion slot.

Page 13: Lesson2   how motherboards work

13

Sockets and CPU's

Motherboard spcification :

Form Factor: Micro ATX, uATXProcessor Socket:  Intel Processor Interface:  LGA1156 Processors Supported:  Intel Core i7  Intel Core i5

LGA 1156 Socket

Page 14: Lesson2   how motherboards work

14

Sockets and CPUs

Motherboard spcification : •Form Factor : ATX .• Processor Socket:  Intel •Processor interface : socket 775

 

Socket 775

Processors Supported:  Intel Pentium D , Intel Pentium EE  Intel Core 2 Duo,  Intel Core 2 Extreme  Intel Core 2 Quad , Intel Pentium Dual Core  Intel Penryn

Page 15: Lesson2   how motherboards work

15

Sockets and CPUs

The Socket 370 processor socket, a ZIF type PGA socket

PGA 370 Processor

Page 16: Lesson2   how motherboards work

16

Sockets and CPUs The newest Intel CPU does not have a PGA. It has an LGA.

• LGA stands for Land Grid Array. An LGA is different from a PGA in that the pins are actually part of the socket, not the CPU.

Anyone who already has a specific CPU in mind should select a motherboard based on that CPU. For example, if you want to use one of the new multi-core chips made by Intel or AMD, you will need to select a motherboard with the correct socket for those chips. CPUs simply will not fit into sockets that don't match their PGA.

The CPU communicates with other elements of the motherboard through a chipset.

False

Page 17: Lesson2   how motherboards work

17

Chipsets

An important set of components on the motherboard ,The chip set is composed of various integrated circuits attached to the motherboard that control how system hardware interacts with the CPU and motherboard.

Intel x58 chipest

Page 18: Lesson2   how motherboards work

18

Chipsets The chip set of a motherboard allows the CPU to

communicate and interact with the other components of the computer, and to exchange data with system memory, or RAM, hard disk drives, video cards, and other output devices.

The chip set establishes how much memory can be added to a motherboard. The chip set also determines the type of connectors on the motherboard.

Most chip sets are divided into two distinct components, Northbridge and Southbridge.

• Northbridge controls access to the RAM, video card, and the speeds at which the CPU can communicate with them. The video card is sometimes integrated into the Northbridge.

• Southbridge, in most cases, allows the CPU to communicate with the hard drives, sound card, USB ports, and other I/O ports.

Page 19: Lesson2   how motherboards work

19

Northbridge, Southbridge The northbridge connects directly to the processor via the front side bus

(FSB). A memory controller is located on the northbridge, which gives the CPU fast access to the memory. The northbridge also connects to the AGP or PCI Express bus and to the memory itself.

The southbridge is slower than the northbridge, and information from the CPU has to go through the northbridge before reaching the southbridge. Other busses connect the southbridge to the PCI bus, the USB ports and the IDE or SATA hard disk connections .

Chipset selection and CPU selection go hand in hand, because manufacturers optimize chipsets to work with specific CPUs.

The chipset is an integrated part of the motherboard, so it cannot be removed or upgraded. This means that not only must the motherboard's socket fit the CPU, the motherboard's chipset must work optimally with the CPU.

Page 20: Lesson2   how motherboards work

20

Bus Speed

A bus is simply a circuit that connects one part of the motherboard to another. The more data a bus can handle at one time, the faster it allows information to travel. The speed of the bus, measured in megahertz (MHz).

Page 21: Lesson2   how motherboards work

21

Busses Found On Motherboard

front side bus (FSB),

back side bus .

The memory bus

The IDE or ATA bus connects

The AGP bus connects

The PCI bus connects

Page 22: Lesson2   how motherboards work

22

Busses Found On Motherboard front side bus (FSB) OR CPU Bus is the bus that carries

data between the CPU and the northbridge.

Depending on the processor used, some computers may also have a back-side bus that connects the CPU to the cache. This bus and the cache connected to it are faster than accessing the system memory via the front side bus.

The amount of data that a CPU can process at the one time depends on the size of the front side bus (FSB). The wider the processor data bus width, the more powerful the processor is. Current processors have a 32-bit or a 64-bit processor data bus.

Page 23: Lesson2   how motherboards work

23

Busses Found On Motherboard back side bus connects the CPU with the level 2 (L2)

cache, also known as secondary or external cache. The processor determines the speed of the back side bus.

memory bus connects the northbridge to the memory.

IDE or ATA bus connects the southbridge to the disk drives.

AGP bus connects the video card to the memory and the CPU. The speed of the AGP bus is usually 66 MHz.

Page 24: Lesson2   how motherboards work

24

Busses Found On Motherboard The PCI bus connects PCI slots to the southbridge.

On most systems, the speed of the PCI bus is 33 MHz. Also compatible with PCI is PCI Express, which is much faster than PCI but is still compatible with current software and operating systems. PCI Express is likely to replace both PCI and AGP busses.

The faster a computer's bus speed, the faster it will operate, A fast bus speed cannot make up for a slow processor or chipset.

Page 25: Lesson2   how motherboards work

25

Memory The speed of the chipset and busses controls how quickly it

can communicate with other parts of the computer. The speed of the RAM connection directly controls how fast the computer can access instructions and data, and therefore has a big effect on system performance. A fast processor with slow RAM is going nowhere.

The amount of memory available also controls how much data the computer can have readily available. RAM makes up the bulk of a computer's memory. The general rule of thumb is the more RAM the computer has, the better.

Page 26: Lesson2   how motherboards work

26

Memory Much of the memory available today is dual

data rate (DDR) memory. This means that the memory can transmit data twice per cycle instead of once, which makes the memory faster. Also, most motherboards have space for multiple memory chips, and on newer motherboards, they often connect to the northbridge via a dual bus instead of a single bus. This further reduces the amount of time it takes for the processor to get information from the memory.

Page 27: Lesson2   how motherboards work

27

Memory

A motherboard's memory slots directly affect what kind and how much memory is supported. Just like other components, the memory plugs into the slot via a series of pins. The memory module must have the right number of pins to fit into the slot on the motherboard.

Page 28: Lesson2   how motherboards work

28

Slots And Ports On Motherboard Peripheral Component Interconnect (PCI)- is 32-bit or 64-

bit expansion slot , PCI is standard slot currently used in most computer, connections for video, sound and video capture cards, network cards.

Accelerated Graphics Port (AGP) - is 32-bit expansion slot , AGP is designed for video card .

Integrated Drive Electronics (IDE) - interfaces for the hard drives , IDE, also called Advanced Technology Attachment (ATA) is an early drive controller interface that connects computers and hard disk drives. An IDE interface uses a 40-pin connector.

Memory slots .

Page 29: Lesson2   how motherboards work

29

Slots And Ports On Motherboard

PCI Express Peripheral Component Interconnect Express), is a computer expansion card standard designed to replace the older PCI, and AGP standards. Introduced by Intel in 2004, PCIe is the latest standard for expansion cards, express is backward compatible with PCI slot , PCI-express has x1,x4,x8,x16 slot .

serial ATA, or SATA computer bus, is a storage-interface for connecting host bus adapters to mass storage devices such as hard disk drives and optical drives. The SATA host adapter is integrated into almost all modern consumer laptop computers and desktop motherboards.

Page 30: Lesson2   how motherboards work

30

Slots And Ports On Motherboard

parallel port on a computer is a standard Type A DB-25 female connector .

SCSI port can transmit data at rates in excess of 320 Mbps and can support up to 15 devices.

USB Ports and CablesThe Universal Serial Bus (USB) is a standard interface that connects peripheral devices to a computer. It was originally designed to replace serial and parallel connections.

serial port can be either a DB-9, or a DB-25 male connector. Serial ports transmit one bit of data at a time. To connect a serial device, such as a modem or printer.

FireWire Ports .FireWire is a high-speed, hot-swappable interface that connects peripheral devices to a computer.

Page 31: Lesson2   how motherboards work

31

Slots And Ports On Motherboard

network port, also known as an RJ-45 port, connects a computer to a network.

PS/2 port connects a keyboard or a mouse to a computer. The PS/2 port is a 6-pin mini-DIN female connector. The connectors for the keyboard and mouse are often colored differently .

Audio PortsAn audio port connects audio devices to the computer .

Video Ports and ConnectorsA video port connects a monitor cable to a compute

Gameport/MIDI – Connects to a joystick or MIDI-interfaced device

Page 32: Lesson2   how motherboards work

32

Slots And Ports On Motherboard Type Of Video Ports and Connectors

Video Graphics Array (VGA) – VGA has a 3-row 15-pin female connector and provides analog output to a monitor.

Digital Visual Interface (DVI) – DVI has a 24-pin female connector or a 29-pin female connector and provides a compressed digital output to a monitor. DVI-I provides both analog and digital signals. DVI-D provides digital signals only.

High-Definition Multimedia Interface (HDMi) – HDMi has a 19-pin connector and provides digital video and digital audio signals.

S-Video – S-Video has a 4-pin connector and provides analog video signals.

Component/RGB – RGB has three shielded cables (red, green, blue) with RCA jacks and provides analog video signals.

Page 33: Lesson2   how motherboards work

33

Slots And Ports On Motherboard

PCI Express slots (from top to bottom: x4 , x16, x1 and x16), compared to a traditional 32-bit PCI slot (bottom).

PCI slot

PCI Express

slots

Page 34: Lesson2   how motherboards work

34

Slots And Ports On Motherboard

Peripheral Component Interconnect (PCI)- is 32-bit or 64-bit expansion slot , PCI is standard slot currently used in most computer, connections for video, sound and video capture cards, network cards…

PCI slots

Page 35: Lesson2   how motherboards work

35

Slots And Ports On Motherboard

AGP slot

Accelerated Graphics Port (AGP) - is 32-bit expansion slot , AGP is designed for video card.

Page 36: Lesson2   how motherboards work

36

Slots And Ports On Motherboard

Parallel ATA (PATA) is an interface standard for the connection of storage devices such as hard disks, and CD-ROM drives in computers. An IDE interface uses a 40-pin connector.

Parallel ATA

Page 37: Lesson2   how motherboards work

37

Slots And Ports On Motherboard

First-generation (1.5 Gbit/s) SATA

ports on a motherboard

SATA – Serial ATA refers to the serial version of the ATA drive controller interface. A SATA interface uses a 7-pin connector

Page 38: Lesson2   how motherboards work

38

  SDRAM DIMM slots

Dual inline memory module ( DIMM) is a circuit board that hold SDRAM,DDR SDRAM and DDR2 SDRAM CHIPS there are 168-pin SDRAM Dimm and 184-pin DDR SDRAM Dimms ,and 240-pin DDR2 SDRAM Dimms

Memory SlotsSlots And Ports On Motherboard

Page 39: Lesson2   how motherboards work

39

Slots And Ports On MotherboardMemory Slots

Ram bus inline memory module ( RIMM) is a circuit board that hold RDRAM CHIPS a typical RIMM has 184-pin configuration .

Page 40: Lesson2   how motherboards work

40

Slots And Ports On Motherboard

DIMM Slots using Dual Channel 240-pin DDR2 with a total capacity of up to 8GB-64bit. You can install DDR2 533/667/800MHz Memory.

Memory Slots

Page 41: Lesson2   how motherboards work

41

Slots And Ports On Motherboard

4 DDR3 Memory Slot

Memory Type: DDR3 Memory Supported : 2000MHZ DDR3

1600MHZ DDR3

Memory Slots

Page 42: Lesson2   how motherboards work

42

Motherboard Power Connector

Modern motherboards with socket 775 cpus get their input voltage from a 24-pin ATX12 connector. This is the only way to obtain the necessary power required.

Page 43: Lesson2   how motherboards work

43

Motherboard Power Connector

An additional connector for a 12-Volt supplementary input voltage for the motherboard is provided

Page 44: Lesson2   how motherboards work

44

Motherboard Power Connector

8- pin AUX power connector found on the motherboard

AUX power connector

Page 45: Lesson2   how motherboards work

45

Slots And Ports On Motherboard

Firewire Cable

FireWire is a high-speed, hot-swappable interface that connects peripheral devices to a computer. A single FireWire port in a computer can support up to 63 devices. Some devices can also be powered through the FireWire port, eliminating the need for an external power source. FireWire uses the IEEE 1394 standard and is also known as i.Link.

Firewire PORT

Page 46: Lesson2   how motherboards work

46

Slots And Ports On Motherboard

Parallel port

Parallel ports can transmit 8 bits of data at one time and use the IEEE 1284 standard. To connect a parallel device, such as a printer.

Page 47: Lesson2   how motherboards work

47

Slots And Ports On Motherboard

SCSI port

A SCSI port can transmit data at rates in excess of 320 Mbps and can support up to 15 devices.

NOTE : Some SCSI connectors resemble parallel connectors. Be careful not to connect the cable to the wrong port

SCSI port -BD 25 PIN

SCSI port -BD 50 PIN

CN50 - 50 pin Centronics

Page 48: Lesson2   how motherboards work

48

Slots And Ports On Motherboard

The Universal Serial Bus (USB) is a standard interface that connects peripheral devices to a computer. It was originally designed to replace serial and parallel connections. A USB hub is used to connect multiple USB devices. A single USB port in a computer can support up to 127 separate devices with the use of multiple USB hubs .USB 1.1 allowed transmission rates of up to 12 Mbps in full-speed mode and 1.5 Mbps in low speed mode. USB 2.0 allows transmission speeds up to 480 Mbps. USB devices can only transfer data up to the maximum speed allowed by the specific port.

USB port

Page 49: Lesson2   how motherboards work

49

Slots And Ports On Motherboard

serial port

serial port can be either a DB-9, or a DB-25 male connector. Serial ports transmit one bit of data at a time. To connect a serial device, such as a modem or printer.

Page 50: Lesson2   how motherboards work

50

Slots And Ports On Motherboard

Network port

RJ 45

network port, also known as an RJ-45 port, connects a computer to a network. The connection speed depends on the type of network port. Standard Ethernet can transmit up to 10 Mbps, Fast Ethernet can transmit up to 100 Mbps, and Gigabit Ethernet can transmit up to 1000 Mbps .

Page 51: Lesson2   how motherboards work

51

Slots And Ports On Motherboard

PS/2 port

PS/2 port connects a keyboard or a mouse to a computer. The PS/2 port is a 6-pin mini-DIN female connector. The connectors for the keyboard and mouse are often colored differently .

Page 52: Lesson2   how motherboards work

52

Slots And Ports On Motherboard

Audio Ports

An audio port connects audio devices to the computer. The following audio ports are commonly used : Line In – Connects to an external source, such as a stereo system Microphone – Connects to a microphone Line Out – Connects to speakers or headphones

Page 53: Lesson2   how motherboards work

53

Slots And Ports On Motherboard

DVI port

Digital Visual Interface (DVI) – DVI has a 24-pin female connector or a 29-pin female connector and provides a compressed digital output to a monitor. DVI-I provides both analog and digital signals. DVI-D provides digital signals only.

Page 54: Lesson2   how motherboards work

54

Slots And Ports On Motherboard

AVG port

Video Graphics Array (VGA) – VGA has a 3-row 15-pin female connector and provides analog output to a monitor .

Page 55: Lesson2   how motherboards work

55

Slots And Ports On Motherboard

HDMI PORT

High-Definition Multimedia Interface (HDMi) – HDMi has a 19-pin connector and provides digital video and digital audio signals.

Page 56: Lesson2   how motherboards work

56

Slots And Ports On Motherboard

S-VIDEO PORT

S-Video – S-Video has a 4-pin connector and provides analog video signals

Page 57: Lesson2   how motherboards work

57

Slots And Ports On Motherboard

RCA jacks

Component/RGB – RGB has three shielded cables (red, green, blue) with RCA jacks and provides analog video signals.

Page 58: Lesson2   how motherboards work

58

Ports On Motherboard

Page 59: Lesson2   how motherboards work

59

EVGA P55 Motherboard

Specifications

Form Factor:  ATX

Processor Socket:  Intel

Processor Interface:  LGA1156  

Processors Supported:Intel Core i7 

Intel Core i5  

Northbridge:  Intel P55 express

  Number of Slots:  4

  Number of Pins:  240-Pin

  Maximum Memory Supported:  4GB - 32bit , 16GB - 64bit

  Memory Type:  DDR3

  MemorySupported:  1066MHz DDR3 

1333MHz DDR3 

1600MHz DDR3

2200+ MHz DDR3

Page 60: Lesson2   how motherboards work

60

EVGA P55 Motherboard

Specifications

Max. Memory Supported Per Slot:  4GB  

LAN Type:  10/100/1000Mbps Gigabit

PCI Express X16 Slots: 

1 - (PCIe 2.0) 

2 - (PCIe 2.0 x8 mode)

PS/2 Keyboard Connectors:  1

USB Ports:  12  

USB Rear Panel Ports:  6

USB Onboard Headers:  3 - (expandable to 6 USB ports)

FireWire Ports:  1

LAN Ports:  2

Serial ATA 3.0Gb/s Headers:  6, 2-External

ATX Power Connectors:  1

PC Power Connectors:  2 - 8 Pin

 

Page 61: Lesson2   how motherboards work

61

EVGA P55 Motherboard