Upload File

lh110 eco series security dvr - lorex

2
easy Time: 20 Minutes Time: 20 Minutes Time: 20 Minutes Hand Tools Hand Tools Skills - Easy Skills - Easy Skills - Easy BASIC INSTALLATION GUIDE BASIC INSTALLATION GUIDE BASIC INSTALLATION GUIDE BASIC INSTALLATION GUIDE easy easy Digital Video Surveillance Recorder ECO LH110 Series Quick Setup Guide ATTENTION: • This guide refers only to the DVR set-up. • DVR model, number of channels/port configuration and HDD (hard disk drive) capacity may vary by model. Check your package for specific content information. • Monitor and cameras are not included. • Broadband router and computer are required for local and remote monitoring (not included). For detailed setup information, please refer to your included User’s Manual. For additional information, please visit our website www.lorextechnology.com Information in this document is subject to change without notice. As our products are subject to continuous improvement, Lorex Technology Inc. and our subsidiaries reserve the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE © 2012 LOREX. All rights reserved. * For setup of Instant Mobile Viewing refer to your User Manual. It’s all on the Web Instant Mobile Viewing Time: 30 Minutes Skills - Intermediate Hardware: PC/Router Congratulations! You can now view & playback video on your via your LAN. 1 X Eco Digital Video Recorder With Pre-Installed HDD* 1 X USB Mouse 1 X Power Adapter 1 X Remote Control 1 X Ethernet Cable 1 X Instruction Manual 1 X Quick Start Guide 1 X CD PACKAGE CONTENTS: 2 Connecting the USB Mouse Connect the USB mouse to the top USB port on the back panel of the DVR. 4 Connecting the Ethernet Cable Connect one end of the Ethernet cable to an available LAN port of your router (not included) and the other end to the DVR’s Network Port. 5 Powering ON the DVR Connect the power cable to the DC 12V port on the rear panel and the power cord into an electrical outlet. The system turns on automatically once the power cord is plugged in. At startup, the system performs a basic system check and runs an initial loading sequence. After a few moments, the system loads a live display view. NOTE: Make sure all cameras and cables are properly connected prior to powering on the system. NOTE: If your monitor is not automatically detected, the DVR front panel buttons, mouse and remote control may not respond. To fix this, simply press “0” three times on the remote control or press and hold the (rewind) button on the DVR front panel until you hear a beep. For more information, please refer to the User’s Manual. 3a Connecting a Monitor (not included) Connect the VGA cable (not included) from your LCD monitor to the VGA port on the rear panel of the DVR. 3b From one of the VIDEO OUTPUT ports connect a BNC terminated cable (not included) to a TV or CCTV monitor. OR 2 Using a Mouse (Recommended) 1: Left-Button: Click to select a menu option; during live viewing in split- screen, double-click on a channel to view the selected channel in full-screen.; double-click the channel again to return to split-screen view. 2: Right-Button: Click to open the Sub-Menu or to exit from a menu. 3: Scroll-Wheel: No function. 1 2 3 You have completed STEPS 1 & 2 successfully. Your DVR is now ready to use. Refer to the owner’s manual to learn how to record, playback, search and for all other features available with this DVR. Managing Passwords By default, passwords are disabled on the system. You do not need to enter a password when accessing any system menus. 7 NOTE: For security purposes, it is highly recommended to enable passwords on the system using the Password Menu. Please refer to the owner’s manual for more information. NOTE: By default, the DVR username and password are left blank Using the Main Menu Right-click anywhere on-screen to open the Sub-Menu and select MAIN MENU (mouse only), or press the MENU button on the remote control or the MENU button on the system front panel of the DVR. 1 NOTE: If passwords are enabled on the system, you need to select your Device ID and enter the 6-digit numerical password to open the Main Menu. 1 2 3 4 5 6 1. Display 2. Record 3. Network 4. Search 5. Device 6. Advance Connecting Cameras (not included) 1 Connect BNC cameras to the BNC ports (VIDEO INPUT) on the rear panel. NOTE: Test the cameras prior to selecting a permanent mounting location by temporarily connecting the cameras and cables to your DVR. NOTE: the four channel model is shown 2 1. Launch Internet Explorer. 2. In the address bar, enter the IP address of your DVR (recorded in the previous step) NOTE: Enter http:// followed by the IP address of your DVR (recorded in step 3-1), then a colon followed by the Web Port number i.e. http://192.168.X.XXX:80 Logging into Lorex Web Client (LOCALLY) 4. You must install the ActiveX ® plug-in for DVR Netviewer to function. Click the attention bar at the top of the main page and select Install ActiveX Control. Lorex Web Client will reset. 5. Log in with your LAN user name and password. From the security window, click Install. 3. Enter your user name and password, then click LOGIN. Your default login: Username is “admin” Password is left blank It is important to set the correct time to assure accurate time stamps on video recordings. Setting the Date & Time 1. Right-click anywhere on the screen to open the Sub- Menu and select MAIN MENU. 2. Click Advance > DATE/TIME. 3. Configure the date and press UPDATE NOW to save your settings. Press APPLY and then EXIT. 6 The DVR can also be controlled using the front panel buttons and the included remote control. Please refer to the User’s Manual for more information on these methods. Other Control Options 3 Remote Control Front Panel Buttons Retrieve the DVR Information To record your IP Address, Mac Address and Web Port right-click in the viewing window, and then click Main Menu>Advance>Information 1 This step will teach you how to locally view your system over the LAN (local area network) using your PC. NOTE: This method only works if your computer is on the same network as the DVR. 3 Live Viewing Using the Web Client (LOCALLY) For a full explanation of all the buttons and features, please refer to the User’s Manual. Upon login, the Web Client main screen appears in your browser. BASIC SETUP BASIC SETUP NAVIGATION AND CONTROLS SET-UP LOCAL VIEWING ON YOUR PC Continued STEP 1 STEP 2 STEP 3 STEP 1 LH110 Series Quick Setup Guide - English - R4 Record the information in the section below: IP ADDRESS: _______._______ ._______._______ MAC ADDRESS: _____:_____:_____:_____:_____:____ WEB PORT: _________ (Required for DDNS registration)

Upload: others

Post on 09-Feb-2022

6 views

Category:

Documents


0 download

Report

TRANSCRIPT

Page 1: LH110 ECO Series Security DVR - Lorex

Skill Level

Intermediateeasy advanced

Time

under 30 minutesunder 15 minutes under 60 minutes

Hand Tools Hardware

Router

Hi Speed

over 60 minutes

Skill Level

Intermediateeasy advanced

Time

under 30 minutesunder 15 minutes under 60 minutes

Hand Tools Hardware

Router

Hi Speed

over 60 minutes

Time: 20 Minutes Time: 20 Minutes Time: 20 MinutesHand Tools Hand ToolsSkills - Easy Skills - Easy Skills - Easy

BASIC INSTALLATION GUIDE BASIC INSTALLATION GUIDE BASIC INSTALLATION GUIDE BASIC INSTALLATION GUIDE

Skill Level

Intermediateeasy advanced

Time

under 30 minutesunder 15 minutes under 60 minutes

Hand Tools Hardware

Router

Hi Speed

over 60 minutes

Skill Level

Intermediateeasy advanced

Time

under 30 minutesunder 15 minutes under 60 minutes

Hand Tools Hardware

Router

Hi Speed

over 60 minutes

Skill Level

Intermediateeasy advanced

Time

under 30 minutesunder 15 minutes under 60 minutes

Hand Tools Hardware

Router

Hi Speed

over 60 minutes

Digital Video Surveillance RecorderECO LH110 Series

Quick Setup Guide

ATTENTION: • ThisguiderefersonlytotheDVRset-up.• DVRmodel,numberofchannels/portconfigurationandHDD(harddiskdrive)

capacitymayvarybymodel.Checkyourpackageforspecificcontentinformation.• Monitorandcamerasarenotincluded.• Broadbandrouterandcomputerarerequiredforlocalandremotemonitoring(not

included).

Fordetailedsetupinformation,pleaserefertoyourincludedUser’sManual.Foradditionalinformation,pleasevisitourwebsitewww.lorextechnology.com

Informationinthisdocumentissubjecttochangewithoutnotice.Asourproductsaresubjecttocontinuousimprovement,LorexTechnologyInc.andoursubsidiariesreservetherighttomodifyproductdesign,specificationsandprices,withoutnoticeandwithoutincurringanyobligation.E&OE©2012LOREX.Allrightsreserved.

* For setup of Instant Mobile Viewing refer to your User Manual.

It’sallontheWeb

Instant Mobile

Viewing

Time: 30 Minutes Skills - IntermediateHardware: PC/Router

Skill Level

Intermediateeasy advanced

Time

under 30 minutesunder 15 minutes under 60 minutes

Hand Tools Hardware

Router

Hi Speed

over 60 minutes

Skill Level

Intermediateeasy advanced

Time

under 30 minutesunder 15 minutes under 60 minutes

Hand Tools Hardware

Router

Hi Speed

over 60 minutes

Congratulations!Youcannowview&playbackvideoonyourviayourLAN.

1XEcoDigitalVideoRecorderWithPre-InstalledHDD*1XUSBMouse1XPowerAdapter1XRemoteControl1XEthernetCable1XInstructionManual1XQuickStartGuide1XCD

PACKAGE CONTENTS:

2

Connecting the USB Mouse

ConnecttheUSBmousetothetopUSBportonthebackpaneloftheDVR.

4Connecting the Ethernet Cable

ConnectoneendoftheEthernetcabletoanavailableLANportofyourrouter(notincluded)andtheotherendtotheDVR’sNetworkPort.

5Powering ON the DVR

ConnectthepowercabletotheDC12Vportontherearpanelandthepowercordintoanelectricaloutlet.Thesystemturnsonautomaticallyoncethepowercordispluggedin.Atstartup,thesystemperformsabasicsystemcheckandrunsaninitialloadingsequence.Afterafewmoments,thesystemloadsalivedisplayview.

NOTE:Makesureallcamerasandcablesareproperlyconnectedpriortopoweringonthesystem.

NOTE:Ifyourmonitorisnotautomaticallydetected,theDVRfrontpanelbuttons,mouseandremotecontrolmaynotrespond.Tofixthis,simplypress“0”threetimesontheremotecontrolorpressandholdthe (rewind)buttonontheDVRfrontpaneluntilyouhearabeep. Formoreinformation,pleaserefertotheUser’sManual.

3a

Connecting a Monitor (not included)

ConnecttheVGAcable(notincluded)fromyourLCDmonitortotheVGAportontherearpaneloftheDVR.

3b FromoneoftheVIDEO OUTPUTportsconnectaBNCterminatedcable(notincluded)toaTVorCCTVmonitor.

OR

2

Using a Mouse (Recommended)

1:Left-Button:Clicktoselectamenuoption;duringliveviewinginsplit-screen,double-clickonachanneltoviewtheselectedchannelinfull-screen.;double-clickthechannelagaintoreturntosplit-screenview.

2:Right-Button:Clicktoopenthe Sub-Menuortoexitfromamenu.

3:Scroll-Wheel:Nofunction.

1 23

YouhavecompletedSTEPS1&2successfully.YourDVRisnowreadytouse.Refertotheowner’smanualtolearnhowtorecord,playback,searchandforallotherfeaturesavailablewiththisDVR.

Managing Passwords

Bydefault,passwordsaredisabledonthesystem. Youdonotneedtoenterapasswordwhenaccessinganysystemmenus.

7

NOTE: For security purposes, it is highly recommended to enable passwords on the system using the Password Menu. Please refer to the owner’s manual for more information.

NOTE: By default, the DVR username and password are left blank

Using the Main Menu

Right-clickanywhereon-screentoopentheSub-MenuandselectMAIN MENU(mouseonly),orpresstheMENU buttonontheremotecontrolortheMENUbuttononthesystemfrontpaneloftheDVR.

1

NOTE:Ifpasswordsareenabledonthesystem,youneedtoselectyourDeviceIDandenterthe6-digitnumericalpasswordtoopentheMainMenu.

1 2 3

4 5 6

1.Display2.Record3.Network

4.Search5.Device6.Advance

Connecting Cameras (not included)

1 ConnectBNCcamerastotheBNCports(VIDEO INPUT)ontherearpanel.NOTE:TestthecameraspriortoselectingapermanentmountinglocationbytemporarilyconnectingthecamerasandcablestoyourDVR.

NOTE:thefourchannelmodelisshown

2 1.LaunchInternet Explorer.2.Intheaddressbar,entertheIP address of your DVR (recorded

inthepreviousstep)NOTE: Enterhttp://followedbytheIPaddressofyourDVR(recorded

instep3-1),thenacolonfollowedbytheWebPortnumber i.e. http://192.168.X.XXX:80

Logging into Lorex Web Client (LOCALLY)

4.YoumustinstalltheActiveX®plug-inforDVRNetviewertofunction.ClicktheattentionbaratthetopofthemainpageandselectInstall ActiveX Control.LorexWebClientwillreset.

5.LoginwithyourLANusernameandpassword.Fromthesecuritywindow,clickInstall.

3.Enteryouruser name and password,thenclickLOGIN.

Yourdefaultlogin:Usernameis“admin”Password is left blank

Itisimportanttosetthecorrecttimetoassureaccuratetimestampsonvideorecordings.

Setting the Date & Time

1.Right-clickanywhereonthescreentoopentheSub-MenuandselectMAIN MENU.2.ClickAdvance > DATE/TIME.3.ConfigurethedateandpressUPDATE NOW to save yoursettings.PressAPPLYandthenEXIT.

6

TheDVRcanalsobecontrolledusingthefrontpanelbuttonsandtheincludedremotecontrol.PleaserefertotheUser’sManualformoreinformationonthesemethods.

Other Control Options

3

RemoteControl

FrontPanelButtons

Retrieve the DVR Information

TorecordyourIPAddress,MacAddressandWebPortright-clickintheviewingwindow,andthenclickMain Menu>Advance>Information

1 ThisstepwillteachyouhowtolocallyviewyoursystemovertheLAN(localareanetwork)usingyourPC.NOTE:ThismethodonlyworksifyourcomputerisonthesamenetworkastheDVR.

3

Live Viewing Using the Web Client (LOCALLY)

Forafullexplanationofallthebuttonsandfeatures,pleaserefertotheUser’sManual.

Uponlogin,theWebClientmainscreenappearsinyourbrowser.

BASICSETUPBASICSETUP NAVIGATIONANDCONTROLS SET-UPLOCALVIEWINGONYOURPC

Continued

STEP1 STEP2 STEP3STEP1

LH110SeriesQuickSetupGuide-English-R4

Recordtheinformationinthesectionbelow:IPADDRESS: _______._______ ._______._______

MACADDRESS: _____:_____:_____:_____:_____:____

WEBPORT: _________(Required forDDNSregis t rat ion)

Page 2: LH110 ECO Series Security DVR - Lorex

INTERNETREMOTEMONITORINGINTERNETREMOTEMONITORING INTERNETREMOTEMONITORING INTERNETREMOTEMONITORING INTERNETREMOTEMONITORING

Congratulations!YouhavecompletedStep4successfully.Youcannowconnectovertheinternettoviewandplaybackvideo.

ContinuedContinuedContinued Continued

5

Openyourwebbrowser(InternetExplorerbydefault)andenter http://www.lorexddns.netintheaddressbar.

DDNS (Dynamic Domain Name System) Set-up

http://www.lorexddns.net

1: Populate the Router Database3TheAutoPortForwardingWizardautomaticallypopulatesalistofcurrentrouters,anddetectsthenumberofconnectedrouters.

1.ClicktheNextbuttonafterthesoftwaredetectsyourrouterconfiguration.

2.UnderRouter IP,clicktheDetect Router IP button.Therouter’sIPpopulatesintheblankfield.

3.UnderUsername and Password,entertherouter’susernameandpassword.

4.UnderIP,entertheIPaddressofyourLorexdeviceasrecordedinStep3-1.

5.UnderPort,entertheportnumber(s)thatrequireforwarding(80,9000,1025).

6.ClickNexttocontinue.

NOTE:ClicktheAuto DetectbuttonifyouhaveaLinksysorNetgearrouter(thisworkswithmostmodels).

2: Enter your Router Settings

80

9000

1025

1.UndertheRouterdrop-downlist,selectthemodelofyourrouterOR clicktheSearchbuttontoenterthenameofyourroutermodel.

NOTE:Ensureyouselectthepropermodelandfirmwarenumberoftherouter(asitappearsonthebackoftherouter)IMPORTANT:Defaultportsthatmustbeportforwardedforremoteaccess:Port80(WebPort)Port9000(NetClient/MediaPort)Port1025(MobileConnectivityPort)

4: Test your Connection1.ClicktheTest Your Connection button.Yoursystem’s

defaultbrowseropensandconnectstoyourLorexdevice. NOTE:EnsurethatInternetExplorerisyoursystem’s

defaultinternetbrowser.

3: Update the Router Settings

1.ClicktheUpdate Router button.Theprogrambeginsupdatingtheroutersettings. Thismaytake20-30seconds.

2.Closetheupdatewindowwhentheupdatefinishes.

NOTE: Youmayhavetomanuallysaveyourroutersettingsafterthesoftwaremakestherequiredchangestoyourrouter.

ForInstantMobileConnectivityusingaSmartPhonerefertotheinstructionmanual.MakesuretocompleteStep4entirely.

ToconnectusingMac,pleaseseetheinstructionmanual.

ForafullexplanationofalltheWebClientbuttonsandfeatures,pleaserefertotheUser’sManual.

Uponlogin,theWebClientmainscreenappearsinyourbrowser.

NavigationTabs

ActiveChannel

List

PlayControlOptions

PTZControlsMain

Screen

Lorex Web Client Screen

To install ActiveX® plug-ins on Internet Explorer:1. LogintoyoursystemusingInternetExplorer.2. ClicktheActiveXbannernearthetopofthebrowser,and

thenclickRun Add-on.

Whenconnectingtoyoursystemthefirsttime,youwillhavetoinstallanActiveXplug-inforInternetExplorer.

Installing ActiveX Plug-ins

RunAdd-on

Auto Port Forward Wizard1

TheLorexAutoPortForwardingWizardisasoftwarethatautomatesrouterportforwarding.

NOTE: YoumustbeonthesamenetworkastheDVRwhensettinguptheDDNS.

Youmusthavethefollowingbeforeyouconfigurethesoftware:1.Yourrouter’smodel and versionnumbers2.Yourrouter’suser name and password3.YourLorexdevice’sIP address (recorded in Step 3-1)4.YourLorexdevice’sportnumbersthatrequireportforwarding(80,9000,1025) 1.Right-clickinthemain

viewingwindow,andthenclickMain Menu>Network.

2. ClickDDNS Setup.3. IntheDDNSdrop-down

menu,selectEnable.

Enable DDNS on the DVR9

Optional: Manual Port Forward4

If you were unable to port-forward your router automatically using the wizard, you will need to manually forward ports 80, 9000 and 1025 to your DVR’s IP address.Allroutersaredifferent.Toportforwardyourrouter,pleaserefertoyourrouter’susermanual.

Anexampleofaportforwardingscreenisshownforillustrationpurposes.

80 80Web

EXAMPLE

9000 12

12

Media 9000

1025 12Mobile 1025

STEP4 STEP4 STEP4 STEP4 STEP4REMOTE INSTALLATION GUIDE

Time: 20 Minutes Skills - IntermediateHardware: PC

Skill Level

Intermediateeasy advanced

Time

under 30 minutesunder 15 minutes under 60 minutes

Hand Tools Hardware

Router

Hi Speed

over 60 minutes

Logging into DVR Web Client (REMOTELY)ToaccessyourDVRremotely,entertheDDNSaddressthatyoucreatedearlierintoInternetExplorer.TheDDNSAddressmustinclude http://,yourURLrequest,followedby.lorexddns.net, a colon,thentheWeb port number of your DVR.

http://tomsmith.lorexddns.net:80ExampleofaDDNSaddress:

URLRequest ColonWebPortNumber

Click Applytosaveyoursettings.

EnterthefollowingintotheDDNS Setupmenu:•Host Name:EntertheDomainName/URLRequestthat

wasemailedtoyouafterDDNSregistration.•User Name:EnteryourDDNSUserNamethatwas

emailedtoyouafterDDNSregistration.•Password:EnteryourDDNSDevicePasswordthatwas

emailedtoyouafterDDNSregistration.

Enter the DDNS Information into the DVR10

11

8AnautomatedREGISTRATION CONFIRMATION E-MAIL willbesenttoyouremail.PrintandSavethisconfirmation.Youwillneedtoenteritintoyoursystemtoenableremoteaccess.

Registration E-mail

1.Click Step 12.CreateanewMyLorexaccountor

signinusinganexistingaccount.

6 Create Account

6.ClickSavetoregisteryourproductforDDNS.ADDNSregistrationconfirmationemailwillbesenttotheemailaddressusedtoregisterforMyLorex.

NOTE:URLRequestshouldnotbemorethan15characters.

6. FillouttheMyDDNSform:

• Product Warranty: Selecttheproductwarrantyyoucreatedintheprevioussteps.

• Device Name:Enteranameforyourdevice.Youcanenteryourname,businessname,oranythingofyourchoice.

• MAC Address:EntertheMACaddressofyourLorexsystemrecordedinStep3-1.

• URL Request:EnterthewebsiteaddressthatwillbeusedtoconnecttoyourLorexsystem.

Complete New Account Information7

4. FillinthewarrantyregistrationformwithyourproductandpurchasedetailsandclickSave Warranty.CheckthestickerunderneathyourDVRfortheProductModelNumberandSerialNumber.

5.ClickSet Up a New DDNS.

Insertthesystem’ssoftwareCD,andfollowtheinstructionstolaunchtheLorex Auto Port Forwarding Wizardsoftware.

Installation2

NOTE: TheWizardisPCcompatibleonly. Macusers,pleasegotoStep4-4.

DomainName/URLRequest:tomsmithDDNSUserName:tomsmithDDNSDevicePassword:(yourpassword)

EXAMPLE

LH110SeriesQuickSetupGuide-English-R44-06062012

Logging into the System

NOTE:CertainISP(InternetServiceProviders)blockport80.Ifyouareunabletoconnect,checkwithyourISPandconsultwiththeusermanualforinstructionsonchangingthewebport.Makesuretoportforwardyourrevisedwebport.

1.Entertheuser name and password,asshownbelow.

3. SelecttheOpenAllChannelsPreviewcheckbox.

4. ClickLogintoconnecttothesystem.

Defaultlogin:Usernameis“admin”Password is left blank

NOTE:Pleaseallow10~15minutesfortheDDNSserverstoupdatewithyournewDDNSaddress.ThisisnormalfortheDDNSsystem.

3.UnderYourAddress,select an address or click Enter a New Address tocreateanewaddress.FillinyouraddressinformationandclickCreate Address.

1.ClickWarranties.2.ClickActivate Warranty.

NOTE:WarrantyRegistrationisrequiredforDDNS.

InstantMobile

Viewing

Select Enable

Host Name: Enter DomainName/URLRequest

User Name:EnterDDNSUserName

Password:EnterDDNSDevicePassword


4 CHANNEL DVR SC324 Series - Lorex Technology · 4 channel dvr sc324 series for more information before operating this system, please read this manual thoroughly and retain it for

Digital Video Capture Card QLR440static.highspeedbackbone.net/pdf/lorex-QLR440-manual.pdfDigital Video Capture Card QLR440 Installation & User Manual ... The QLR DVR is a Professional

LOREX LIVE SD 7 - Lorex Technology · LOREX LW2700 Series LIVE SD 7 Wireless Digital Security System LOREX Day/Night WiFi Friendly Secure Quad Function Indoor/ Outdoor

SINGLE CHANNEL DVR - Lorex › downloads › ... · light will be ON to indicate that the DVR is in Standby mode. 1. Press the Power button. The POWER LED will turn from red to orange,

Amethyst IP v. Lorex

Lorex Cloud App Instruction Manual

CHANGE MONITORING. - LOREX TECHNOLOGY

MANUAL DE INSTRUCCIÓN - Lorex

LNWDB1 Series - Quick Start Guide - Lorex

LH1468Z120B - Lorex

Manual - LH100 Series Security DVR - Lorex - Lorex Technology · PDF fileH.264 NETWORK READY DIGITAL VIDEO SURVEILLANCE RECORDER ... Please read the Quick Start Guide and User Manual

2K QHD Video Doorbell - Lorex

LOREX CLIENT Remote Software 4...6 Lorex Client Software - Main Screen Lorex Client Software - Main Screen 1. Main Screen - Displays live Camera images (delays in images may be due

Time Hand Tools Hardware CONFIGURACIÓN EN …a de configuración rápida de la serie LH010 ECO BlackBox - Español - R1 5. Haga clic en Iniciar sesión para acceder a su DVR. Lorex

Lorex Client 11 · Lorex Client 11 Lorex Client 11 is a software for the PC that allows you to control, and manage multiple DVRs. ... • LAN) 10/100 BaseT Network. Prerequisites

IP PTZ Camera - Lorex

May 24, 2012 - LOREX TECHNOLOGY

Time Quick Setup Guide - LOREX TECHNOLOGY

LCD MONITOR / 8 CHANNEL DVR COMBO - Lorex Technology · Setting up Remote Viewing 4 System - IP & MAC Address The IP & MAC Addresses are necessary for DDNS Setup (for remote access

21” FLAT SCREEN CRT / DVR OBSERVATION SYSTEMstatic.highspeedbackbone.net/pdf/lorex-SG21FD3044-161-manual.pdf · Increase the separation between the equipment and the camera and/or

Line Follower Head LH110 - Nireco · Webguide Controles Webguide Control The Line Follower Head LH110 is the successor model to our long-serving LH100A. The LH110 can be used on slitting

Quick Setup Guide STEP 4: STEP 5 - Lorex - 4K Security ......4K MPX Security DVR Remote Control Dimensions Connect your cameras (not included) to your recorder. LHV5100 Series Quick

LOREX CLIENT Remote Agent Software - Welcome to Lorex - Leader in