light drop-weight tester
TRANSCRIPT
-
8/11/2019 Light Drop-weight Tester
1/1
35
164
Electronic gauge
Dimensions: 210x80x25 mm
Settlement measuring range:0.10 2.0 mm 0.02 mm
Temperature range: from 0 to 40C
Power supply:4xR6 (rechargeable) batteries
Accessories
s35-T0120/1 Transport cart
s35-T0120/2 Base plate withmagnet. Used for easy positioningof the apparatus
THE LIGHT DROPWEIGHT TESTER
qSTANDARDAs per German technical test code for soil
and rock in road construction TP BF StB
part B 8.3/1997
M 35-T0120
Light drop-weight tester
Introduction
The dynamic plate load test employingthe Light drop-weight tester is used in
earthwork and road construction to deter-mine the soil bearing capacity and thecompaction or consolidation of soils andnon-cohesive subbases, as well as for soilimprovement applications. The test methodis suited for coarse-grain and mixed-grainsoils having a maximum grain size of 63mm. The test method may be used todetermine the dynamic modulus of defor-mation of soil in the range Evd = 15 80MN/m2.
Further fields of application include:
- Road construction- Testing of pavement bedding- Quality assurance in canal construction- Compaction test in ducts and trenches- Backfill of foundations- Railway construction.
The Light drop-weight tester being easy tohandle is specifically suited for monito-ring intra-company operations.
Advantages over the plate load tester
- Time-saving immediate evaluation of
each measurement- Testing in locations not readily accessi-
ble- Low tester weight- No vehicle required for loading.
The dynamic plate load test using the Lightdrop-weight tester has been approved asan indirect test method for determiningthe degree of ramming, in:
ZTVEStB 94ZTVEStB 95ZTVEStB 97NGT 39
Function
Place the load plate on the prepared sur-face to be tested and position the loadingunit on the load plate. Connect the settle-ment meter. The drop weight is allowed todrop onto the spring element, the loadingunit produces a defined impact load andthe overall amount of compaction (orsettlement) of the soil under the load plateis measured. Once the measuring routine
is started perform three impact cycles forthe measurement. Following each cycle themeter displays the amount of settlement inmillimetres. Upon completion of a series ofmeasurements, the settlement is averaged,and the dynamic modulus of deformationis determined and displayed. Results canbe printed out on a micro-printer or on aprinter connected to a PC as necessary.
Specifications
Loading unit
Total weight: 15 kg
Drop weight: 10 kg
Max. impact force: 7.07 kN
Duration of impact: 18 ms
Spring element: cup springs
Load plate with integral
acceleration transducer
Diameter: 300 mm
Plate thickness: 20 mm
Total weight: 15 kg
35-T0120
35-T0120 with 35-T0120/1
35-T0120/2
Testing equipment for the construction industry
COMPACTED ROAD BASE AND SUBBASE SOILS
Bearing Capacity - Plate load testing. . . . . . . . . . . . . . .
Dynamic deformation module of soils