lighting and architectural lighting control … · monet ™ scene-capable ... renoir™ preset...

Whether it’s advanced architectural lighting controlsystems that can be custom-manufactured for anysite-specific requirement, or innovative box-mountedcontrols for incandescent, low-voltage and fluorescentlighting, Leviton has the products you can depend on.Our designer preset systems and distributed program-mable computer-controlled systems are ideal for large-scale, multi-use environments. Leviton’s innova-tive line of box-mounted controls includes all-new digital multi-location devices that provide maximumperformance in architectural, commercial and residen-tial settings.

Fan Speed Controls are conveniently grouped in thissection with the lighting controls that share the sameproduct name and design features. For example,IllumaTech Fan Speed Controls are located on thesame page as IllumaTech Lighting controls.

Leviton Fan Speed Controls provide convenient con-trol of ceiling fans and their incandescent light fixturesfor maximum comfort and efficiency. Follow fan manufacturer’s specifications when selecting andinstalling any Leviton Fan Speed Control, as not allfans can be operated by solid-state controls.

Lighting andFan SpeedControlsArchitectural, Commercial and Residential Grade

OS E C T I O N

ARCHITECTURAL LIGHTING CONTROLSYSTEMSOverview _________________________O1Dimensions™ D3200 ____________O2, O3Dimensions™ D4200 ____________O4, O5Power Extenders __________________O6a-2000-24 Modular Dimming Cabinets _O7DALI Controls _____________________O8ARCHITECTURAL SPECIFICATION Monet™ Scene-Capable Controls _____________________O9, O10Monet™/Mural™ Scene Controller ____O11Monet™ Non-Scene Controls _______O12Monet™ Multi-Gang Wallplates ______O13Renoir™ Preset Slide Dimmers__O14, O15Van Gogh™ Rotary Dimmers____O16, O17Ganging and Derating Lighting Controls _________________O18MURAL LIGHTING CONTROLSMural Scene-Capable Controls ______O19Mural L/S Preset Controls __________O20Mural Dimmers ___________________O21TOUCH LIGHTING CONTROLSTouchPoint™ Preset Touch-Pad Dimmer________________O22True Touch™ Dimmer ______________O23ToggleTouch™ Toggle Preset Touch-Pad Dimmer________________O24

TRADITIONAL LIGHTING CONTROLSIllumaTech™ Preset Slide Controls ___O25IllumaTech™ Rotary Controls _______O26IllumaTech™ Non-Preset Slide Controls____________________O27SureSlide ™ Controls ______________O28Trimatron™ Deluxe Rotary Controls __O29INCANDESCENT LIGHTING CONTROLSToggle Dimmers __________________O30Decora 911 Flasher Switch _________O30Feed-Through Lamp Cord Dimmers__O31Full-Range Dimmer Socket _________O31ELECTRONIC TIMER CONTROLSDecora Plus Electronic Timer and TimeDelay Switches ___________________O32Decora Plus Programmable ElectronicTimer Switches___________________O33LiteKeeper® and TimeKeeper®

Stand-Alone Control Panels ________O34

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.comCourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

TouchPoint™

Decora full-rangemulti-location touchdimmer responds towhere finger isplaced on pad. WithPreset switch, LEDlocator, and LEDbrightness indica-tors.

Dimensions™ D3200

Multizone Controller/Dimmers provide advancedmultipoint scene control forcommercial and high-endresidential applications.Self-contained units controlup to six zones

Mural™

Decora rocker-styledigital dimmer with LEDbrightness level indica-tors. Provides single-pole and multi-locationdimming. Convenientcolor-change kits avail-able.

O1 To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World

Leviton’s Lighting Controls offeringincludes Architectural Lighting ControlSystems and a comprehensive line ofbox-mounted lighting controls for incan-descent, low-voltage and fluorescentlighting, as well as fan speed controls.Box-mounted controls are offered infour functional groupings: ArchitecturalSpecification, Mural™, Touch, andTraditional.

Superior RFIfiltering coil

Soft start/gentle fadefeature smoothly raises and lowersbrightness level; helpsincrease bulb life

Protected memory andvoltage compensationmaintains light levels during minor power fluctuations

Superior electroniccircuitry for maximum

service life

Air gap switch accessedby moving slider into hid-

den keyway

Wrap-around copperheat spreader provides

efficient heat distribution

Lighting ControlsLighting Controls

Encapsulated, gold-surfaced touch contacts resist

humidity and wear

Features and Benefitsn Provide full-range dimming in single pole,

three-way, four-way and multi-locationswitching schemes

n Digital microprocessor state-of-the-art circuitry

n Styled for use with Decora wallplates andcan be ganged with other Decora devices(Wallplates not included; must be orderedseparately)

n All devices are UL Listed and CSACertified

n Backed by a Limited Two-Year Warranty

Cat. No. MNI06-1LW

Cat. No. MNI06-1LWCat. No. D3206-1LW

Cat. No. MDI06-1LW Cat. No.TTI10-10W

A Complete Selection of Quality Lighting Controls

Cat. No. MN00C-1LW

Cat. No.TPI06-1LW Cat. No.TGI10-1LW

Monet™

Premier ArchitecturalSpecification Grade SlideDimmer with Scene Lightingcapability. Features all digitalcircuitry and low-profile,esthetic design.

True Touch™

Decora-style digitaltouch dimmer.Provides fingertipfull-range single-pole and multi-loca-tion dimming.Convenient color-change kits avail-able.

Monet™/Mural™Scene ControllerDecora-style controller sendscommands for up to sevendistinct scenes to individual Monet and MuralScene Capable Controls.

ToggleTouch™

Unique designfeatures toggle-style ON/OFFswitch with brightand dim digitaltouch pads along-side toggle.Available withLED locator light.

Closed-element slidepotentiometer providesconsistent feel

Specially designed tominimize shadowswith non-reflectiveeasy-to-clean matte finish

Commercial Grade


O2For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World

Architectural LightingControl SystemsArchitectural LightingControl Systems

Dimensions™ D3200 Architectural Lighting Control SystemThe Dimensions D3200 is a component-based lighting system flexible enough for a wide range of commercialand high-end residential lighting applications. The essential component is the Multizone Controller/Dimmer, aself-contained programmable dimmer and scene controller that will control up to six zones of lighting. The unitwill also function as a control unit for other devices attached to the Leviton Control Network (LCnet). By addingwall mounted scene controllers, a hand-held remote and a SmartJack for PC-based programming, the D3200offers a comprehensive lighting control solution that can be expanded at any time.

Dimensions™ D3200 System ComponentsDESCRIPTION CAT. NO. LOAD RATING COLOR*Dimensions D3206 Multizone Controller/Dimmer— D3206-1L 120V AC 60Hz: W, SSelf-contained dimmer with learning IR receiver. 1920W/VA total output,Controls up to 6 local zones and a maximum of 1000W/VA max. per zone, 186 remote zones. Features 8 scene buttons and 1200W/VA max. per side.32-scene capability. LCD with wizard menus. For use with Incandescent, Supplies 24VDC @ 150mA power to hardwired Tungsten, Magnetic Low Voltage control devices. Transformer, Advance Mark X™

Fluorescent Dimming Ballast, Neon and Cold Cathode.

Dimensions D3208 Multizone Controller/Dimmer— D3208-1L Same as D3206 W, SAll features of the D3206 plus: Combine/separate functionality for 8 partitioned spaces in up to 256 configurations. Up to 64 scheduled scene changes.Easy access to 2 auxiliary loads from front panel.Controls 62 additional remote zones (248 max).

Dimensions D3206/D3208 Color Change Kits D32CK-0 — II, WW, AA, GG, EE, SW

Dimensions D3200 Scene Controller—Decora-style NE505-00C No load rating— White with matching 5-button wall controller with 4 scene recall buttons for use with D3200 wallplate. Includes plus OFF. Features learning IR receiver. Controller /Dimmers only snap-on Ivory Color

Change Kit . (Ivory wallplate sold

separately)

D3200 Infrared Remote Control—Handheld remote NE210-00E No load rating— Blackfor use with any IR-receiving D3200 Controller. for use with any Provides 8 scene selections, group DIM/BRIGHT, IR-receiving D3200 Max and OFF buttons. Controller

D3200 Terminator Block—Terminates LCnet run if NE600-00W No load rating Whitetotal wire length of the bus plus the drops is greater than 10 ft.

SmartJack—Decora-style jack enables D3200 Setup NE100-00C No load rating White with matching Software to be run from PC or laptop. Includes PC wallplate. Includes cable and Software CD. Essential for any LCnet snap-on Ivory Color system where PC interface is desired.† Change Kit

(Ivory wallplate sold separately)

Power Extenders—Extends the power handling See page O6 Models available for incandescent, See page O6capacity of any D3206/D3208 dimming zone. for complete magnetic-low voltage, electronic

listing low-voltage, Advance Mark X™or equivalent and 0–10VDC dimmable fluorescent ballasts.See page O6 for ratings.

†Software can be downloaded from www.leviton.com/D3200

See page O3 for Dimensions D3200 Specifications and Features.

8.80 (223.5 mm)2.65 (67.3 mm)

2.26 (57.4 mm)

2.84

(72

.1 m

m)

2.63

(66

.8 m

m)

BACK COVER TO HEAT SINK

BAC

K C

OV

ER

4.73

(12

0.1

mm

)

DIMENSIONS MULTIZONE CONTROLLER/DIMMERCat. Nos. D3206/D3208

Commercial Grade

D3206

D3208

*COLORCat. No. D3206/D3208 available withWhite Frame/White Cover (-1LW) orWhite Frame/Smoke Cover (-1LS). Forother colors, order Cat. No. D32CKColor Change Kit and add suffix as follows:Ivory Frame/Ivory Cover (-II), White Frame/White Cover (-WW),Almond Frame/Almond Cover (-AA),Gray Frame/Gray Cover (-GG), Black Frame/Black Cover (-EE), White Frame/Smoke Cover (-SW).



PowerExtender

Terminator

PowerExtender

SmartJack Terminator

SceneController

LCnet (2 pair Cat-5 wires)

D3206/8Controller

NetworkDimmer

Typical DIMENSIONS™ D3200 SYSTEM using a single LCnet bus

NE505

NE202

Architectural LightingControl SystemsArchitectural LightingControl SystemsCommercial Grade

Dimensions™ D3200 Architectural Lighting Control System SPECIFICATIONS & FEATURESD3206• 6 Internally-driven dimming loads

• Controls up to 186 remote zones via Leviton Control Network (LCnet) bus

• 8 Scene buttons and 32-scene capability

• 2-line, 32-character LCD with Wizards for easy setup

• LED Light-level indicators

• Group raise/lower buttons for changing all zone light levels at same time

• Learning IR Receiver

• Powers LCnet controllers and Leviton SmartJack

• Mounts in 4-gang box with 4-gang device cover

• CUL/US Listed, NOM Certified

• Backed by a Limited Two-Year Warranty

D3208 Additional Features• Up to 64 scheduled scene changes based on time of day or astronomical clock

• Combine/Separate functionality for 8 partitions in up to 256 different configurations

• Controls up to 62 more remote zones (248 max)

• Easy front panel access to 2 auxiliary LCnet dimming zones or switching loads

APPLICATIONS• Home Theaters• Great Rooms• Ballrooms• Conference Rooms• Restaurants• Executive Offices• Surgical Suites• Houses of Worship• Light Commercial Applications


O4


For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building A Connected World

Dimensions™ D4200 Architectural Lighting ControllerThe Dimensions D4200 puts total lighting control at your fingertips. This single panel can create and savelighting scenes, switch lights and scenes instantly or with gradual fades, and provide complete control ofup to 32 lighting zones per unit (320 per system). The D4200 works with a-2000 Modular DimmingCabinets, i Series e Dimming Racks, and any DMX Dimming Rack in conjunction with an NPC XP orDLR. Up to 127 D4200 stations can be added in a low-voltage Class 2 wiring system using Luma-Net® IIIcommunication, including Luma-Net Hubs and a Combine/Closure Interface.

DESCRIPTION CAT. NO.Dimensions D4200 Lighting Controller—Eight preset buttons, each with indicatorpilot light. Controls up to 32 zones of virtually any type of lighting (maximum of 320zones per system). Raise/lower buD4200 Wall-Mounted Remote Control Stationschzone plus master raise /low. Works with up to 127 devices. Pushbutton recall of 8scenes with 8 additional scenes accessible from remote entry stations. Fade time canbe set for each scene. Astronomical time clock allows sequenced events based on timeof day. LCD readout shows zone and scene labels plus intensity settings. Built-in IRreceiver for use with optional handheld remotes. Electronic lock prevents unauthorizedoperation. Available with white frame/white cover or white frame/black translucent cover.

DESCRIPTION CAT. NO.D4200 Wall-Mounted Remote Control Stations

One-button Start/Stop Sequencer D42SQ-00W

One-button Start/Stop Event Timer D42ET-00W

One-button Join/Separate Link D42LI-NKW

One-button Lock/Unlock D42LO-CKW

Two-button: Preset Scene 1 and OFF, built-in IR receiver D42P1-00W

Two-button: Master Raise and Lower, built-in IR receiver D42RL-00W

Two-button: Preset Scene Max and OFF, built-in IR receiver D42MO-00W

Three-button: Preset Scene 1, Max and OFF, built-in IR receiver D42P1-M0W

Four-button: Max, OFF, Master Raise and Lower, built-in IR receiver D42MO-RLW

Five-button: Preset Scenes 1–4 and OFF, built-in IR receiver D42P4-00W

Five-button: Preset Scene 1, Max, OFF, Master Raise and Lower, built-in IR receiver D42P1-RLW

Eight-button: Preset Scenes 1–4, Max, OFF, Raise and Lower, built-in IR receiver D42P4-RLW

Eight-button: Preset Scenes 9–16 D42P9-16W

Ten-button: Preset Scenes 1–8, Max and OFF, built-in IR receiver D42P8-00W

Ten-button: Preset Scenes 9–16, Raise and Lower D42P9-RLW

D4200 IR Handheld Remote Controls†

Four Preset Scenes D42IR-04L

Eight Preset Scenes D42IR-08L

Sixteen Preset Scenes D42IR-16L

†Remote IR Ceiling-Mount Receivers available in single-gang and 2-gang models

D4200

4.69

(119

.1 m

m)

with

cov

er c

lose

d

8.80 (223.5 mm)

2.41 (61.2 mm)

2.69

(68.

3 m

m)

2.25

(57.

2 m

m)

1.95 (49.5 mm)

2.34 (59.4 mm)

Cat. No. D4200

D4200

Commercial Grade

See page O5 for Dimensions D4200 Specifications and Features.




a-2000-24

PRESET SELECT STATION

17

16

18

10

11

1413

15

12

5

87

9

6

B

2

43

C

1

A

D4200 CONTROL STATION

LUMANET

DMX

CLEAR

CANCEL

FAN

COMMUNICATION PORTS

FULL BRIGHT

AUXILIARY

PHASE LOSS

BRIGHT

SELECT

FULL

SAVE

LUMA-NET III HUBD4200 CONTROL STATION

PRESET SELECT STATION

C

12

18

1516

17

1314

6

910

11

78

34

5

12

AB

DMX CANCEL

LUMANET CLEAR

PHASE LOSS

AUXILIARY

FULL BRIGHT

COMMUNICATION PORT S

FAN

SAVE

FULL

SELECT

BRIGHT

a-2000D

Note: a-2000-24 Cabinet can be in the middle of a daisy chain

D4200 CONTROLLERS, REMOTE STATIONS and a-2000 DIMMER CABINET in Typical Luma-Net® System (Must be daisy chained, station to station)

For more information about the deviceson this page and Leviton's complete lineof Architectural Lighting ControlSystems, call 1-503-404-5500.

D42P8-00W

Commercial Grade

Dimensions™ D4200 Architectural Lighting Controller SPECIFICATIONS & FEATURESD4200 Controller• Controls virtually any light source when used with Leviton a-2000 Dimming Panels, i Series e Dimming

Racks, and any DMX Dimming Rack (in conjunction with an NPC XP or DLR)

• Controls up to 32 zones and maximum of 320 zones via Luma-Net III system

• 8 Scene buttons and 16-scene capability

• LED light-level indicators

• 2-line, LCD for time, setup screens, scene labels, zone labels, and zone intensity settings from 0 to 100%

• Individual raise/lower buttons for each zone

• Master raise/lower buttons for changing all zone light levels at same time

• Works with up to 127 devices (Controllers and Remote Stations, Luma-Net Hubs and Combine/ClosureInterface)

• Built-in IR Receiver

• Built-in schedule and sequence functions

• Astronomical time clock allows preset or sequence events to be called up according to time of day

• Mounts in 4-gang box with 4-gang device cover

• UL Listed

• Backed by a Limited Two-Year Warranty

D4200 Remote Stations• Mount in single-gang deep switchbox

• Attractive styling accepts Decora wallplates or Decora Plus screwless wallplates

• Devices listed here are White–see your Leviton representative for other available colors

APPLICATIONS• Ballrooms• Cafeterias• Auditoriums• Lecture Halls• Conference Rooms• Restaurants• Meeting Rooms• Houses of Worship


O6


For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building A Connected World

SPECIFICATIONS & FEATURES• Emulates characteristics of dimmer it is

connected to in terms of dimming range andresolution

• Low-end trim available for setting minimumbrightness level

• PE100 and PE200 model can be surface orflush mounted using 1900 Box and 2-gangraised cover

• PE300 mounts in 4" square box • UL Listed, CSA Certified and NOM Certified• Backed by a Limited Two-Year Warranty

APPLICATIONS• Works with any Dimensions Multizone

Controller/Dimmer to extend load capacity of any zone

• Extends load capacity of box-mounted dimmers (see compatibility chart)

• Works with all families of Leviton ArchitecturalSystems

PE100-10W, PE200-10W, PE200-70W

Commercial Grade

PE300-D0W

Power Extenders

DESCRIPTION CAT. NO. RATING

Extends dimming zone capacity to full 1920W/VA @ 120V PE100-10W Input Voltage: 120V 50/60Hzfor incandescent, and magnetic low-voltage, halogen or Load Rating: 1920W/VAneon/cold cathode lighting. Aluminum heat sink with Load Output Power: phase independent snap-on white cover of control device

Dimmer Input: 120V 50/60Hz

Extends dimming zone capacity to full 1920VA @ 120V for PE200-10W Input Voltage: 120V 50/60HzMark X™, Hi-Lume® or equivalent dimmable fluorescent Load Rating: 1920VA Mark X, Hi-Lume ballast only. Aluminum heat sink with snap-on white cover or equivalent fluorescent

dimmable ballasts only.Load Output Power: phase independent of control deviceDimmer Input: 120V 50/60Hz

Extends dimming zone capacity to full 3000VA @ 277V PE200-70W Input Voltage: 277V 50/60Hzfor Mark X, Hi-Lume or equivalent dimmable fluorescent Load Rating: 3000VA Mark X, Hi-Lume ballast only. Aluminum heat sink with snap-on white cover or equivalent fluorescent

dimmable ballasts only.Load Output Power: phase independent of control deviceDimmer Input: 120V 50/60Hz

Extends dimming zone capacity to full control PE300-D0W Input Voltage: 108VAC to 305VAC, 60Hzof a 20A circuit with 0–10 VDC Mark VII®, Load Rating: 20A–2400VA@120VAC, OSRAM Sylvania Quicktronic® Helios™ 5500VA@277VAC or equivalent ballast. Metallic silver color. Power Consumption: 6W@120VAC,

18W@277VACOutput Ballast Control: 0–10 VDCDimmer Input: 120V 60Hz

Mark X™ and Mark VII™ are trademarks of the Advance Transformer Company.Hi-Lume® is a registered trademark of the Lutron Electronic Co., Inc.Consult your Leviton representative for availability of Power Extenders for electronic low-voltage lighting.

Power Extender CompatibilityPower Extenders work with any Dimensions Multizone Controller/Dimmer and all Architectural Systems.Refer to the chart below for compatibility with Leviton Box-Mounted Dimmers.

POWER EXTENDER BOX-MOUNTED DIMMER COMPATIBILITY

PE100-10W Must use 120V 600W Incandescent version of IllumaTech, Mural, True Touch, TouchPoint, ToggleTouch and Home Controls. For Monet, use 120V 600VA Magnetic Low-Voltage version (requires Neutral wire). For dimmers that include a Neutral wire, the dimmer Neutral wire must be connected.

PE200-10W Must use 120V 600VA Mark X version of Monet, IllumaTech, Mural and TouchPoint.PE200-70W For dimmers that include a Neutral wire, the dimmer Neutral wire must be

connected.

PE300-D0W Must use 120V 600W Incandescent version of IllumaTech, Mural, True Touch, TouchPoint, ToggleTouch and Home Controls. For Monet, use 120V 600VA Magnetic Low-Voltage version (requires Neutral wire). For dimmers that include a Neutral wire, the dimmer Neutral wire must be connected.

2.06(52.3 mm)

2.80

(71

.1 m

m)

4.72

(11

9.9

mm

)

4.50 (114.3 mm)

Cat. Nos. PE100-10W, PE200-10W, PE200-70W

4.00 (101.6 mm)

4.30

(10

9.2

mm

)

4.00

(10

1.6

mm

)

3.62 (91.9 mm)3.50 (88.9 mm)

Cat. No. PE300-D0W



Architectural LightingControl SystemsArchitectural LightingControl SystemsCommercial Grade

a-2000-24

a-2000-24 with Relay Cabinet

a-2000-24 Architectural Grade Modular Dimming CabinetThe new Architectural Grade a-2000-24 Digital 24-channel Modular Dimming Cabinet holds up to 24 dim-mer channels in 12 dual dimmer modules and delivers robust precision performance typically found onlyin high-end theatrical dimming systems. This user-friendly, totally modular cabinet is stackable to provide48 dimmers with one power feed. It can also be used with a companion Relay Cabinet for straight relaycontrol of up to 2 circuits in 120V, 277V and 247V applications. The a-2000-24 will integrate seamlesslywith any of Leviton's Architectural Lighting Controls.

a-2000-24 Modular Dimming and Relay Cabinets


24-Channel Architectural Grade Modular a-2000-24 Up to 24 dimmer channels, 2400W per Dimming Cabinet—With digital microprocessor-based channel. Individual dimmers rated dimming/switching panel. 15A or 20A. For incandescent, magnetic

low-voltage, tungsten halogen and cold cathode lighting. Compatible with many types of electronic fluorescent dimming ballasts: 0 to 10 VDC types including Advance Mark VII™, OSRAM Sylvania Quicktronic® Helios™ and MagneTek Ballastar™; 2-wire types such as Advance Mark X™ and 3-wire Lutron Hi-Lume® units

Relay Cabinet—Holds up to 12 relays to provide straight a-2000-24 Up to 12 relays. Individual relays rated relay control of fluorescent and non-fluorescent loads. Bolts Relay Cabinet for 20A in 120V, 277V and 347V directly to a-2000-24 Dimmer Cabinet to make a single applications. Controls up to 8 separate easy-to-mount cabinet. 0 to 10 VDC electronic fluorescent

dimming circuits.

SURFACE MOUNT HARDWARE SHOWNCABINET SHOWN WITH MAIN LUGS

1" CONDUIT CONTROL WIRING ENTRY4 PLACES

2 1/2" CONDUIT MAIN FEED 7 LOAD ENTRY

2 PLACES30.125 (765.2 mm)

2 (50.8 mm) CONDUITMAIN FEED ORLOAD ENTRY

1 (25.4 mm) CONDUITLOAD ENTRY6 PLACES

2 (50.8 mm) CONDUITCABINET FEED ORLOAD ENTRY

2 (50.8 mm) CONDUITLOAD WIRING ONLY

NEUTRAL

CABINET FEEDTERMINALS

LOAD TERMINALS

GROUND LUG

CONTROLELECTRONICS

PLUG INDUAL DIMMER

MODULE

POWER SUPPLY

DIMMERPROTECTION

BREAKER

DIMMERBYPASS

SWITCHES

2 (50.8 mm) DIAMETERINTER-CABINETWIRING ENTRY

2 (50.8 mm) DIAMETERINTER-CABINETWIRING ENTRY

2.5 (63.5 mm) CONDUITCABINET FEED &

LOAD ENTRY

45.5 (1155.7 mm)

43 (1092.2 mm)

Cat. No. a-2000-24

SPECIFICATIONS & FEATURES• 4" Depth allows surface or recess mounting• Compact 30-3/8 inch cabinet width fits

between two stud widths• Relay Cabinet (14.25" width) bolts directly to

Dimmer Cabinet to form single compact unit• Contractor-friendly design with large wiring

space • Stackable to provide 48 dimmer channels• Top, bottom or side feed• Plug-in dual dimmer modules for rapid field

replacement• Eight 0 to 10 VDC analog inputs • Bypass switch for each dimmer allows full-ON

operation• Theatrical-grade dual SCR dimming circuits

outperform standard triac-based dimmers• Operates at 97% efficiency• Toroidal filter with 350 µsec rise time• UL and cUL Listed• Backed by a Limited Two-Year Warranty

APPLICATIONS• Ballrooms• Cafeterias• Auditoriums• Lecture Halls• Conference Rooms

For more information about the deviceson this page and Leviton's complete lineof Architectural Lighting ControlSystems, call 1-503-404-5500.



CD250

CD100

Commercial Grade

DALI ControllerThe DALI Wall Mounted Controller is designed to control fluorescent ballasts supporting the DigitalAddressable Lighting Interface (DALI specification). For maximum versatility, two individual snap-on controlfaces are provided with each DALI Controller to allow either ON/OFF Control or Scene Control, and there isalso a choice individual or group operating modes.The DALI Loop Power Pack supplies power to a singleDALI loop and complements the Wall Mounted Controller.

DALI Controller and Loop Power Pack


DALI Decora-Style Wall Mounted Controller—Comes with CD250 For use with DALI compatible ballasts two snap-on faces: One for ON/OFF Control (with 4 sets of only in a DALI control loop.ON/OF buttons plus DIM/BRIGHT) and one for Scene Control Input Voltage: 9.5V–22.5V(with 8 Scene buttons plus DIM/BRIGHT). Each Control Face Input Current: 10mA provides individual of group modes. Color:White.

DALI Loop Power Pack—Supplies power to a single CD100 Input Voltage: 120/277VAC ±10%DALI loop. For use with CD250 DALI Dimming/Scene DALI Output Voltage: 12VDC nominalController Color: Metallic Silver. DALI Output Current: 100mA

Note: Only one power supply is used per loop.

SPECIFICATIONS & FEATURES• Multiple controllers can easily be added to the

DALI network to support multiple entry ways• Versatile controller designed for single office

applications or large projects• Snap-on control face design on Controller to

offer a choice ON/OFF or SCENE control,with a choice of individual or group modeoperation

• Up and down control buttons allow precisetuning of selected levels

• Makes it easy to program and control intelligent lighting fixtures using ballasts thatsupport the DALI protocol

• Can be used to program a small DALI systemwithout additional programming tools

• CD250 Controller Decora styling enhancesany décor.

• CD100 mounts in 4" square electrical box• Suitable for Class 1 or Class 2 control wiring • UL Listed, CSA Certified and FCC Part 15• Backed by a Limited Two-Year Warranty

DALI Lighting ControlsDALI Lighting Controls

1.76 (44.7mm)

4.41

(11

2.0m

m)

3.81

(96

.8m

m)

3.28

(83

.3m

m)

0.15 (3.8mm)

1.30 (33.0mm)

1.56 (39.6mm)

2.69

(68

.3m

m)

Scene 1 Scene 2

Scene 3 Scene 4

Scene 5 Scene 6

Scene 7 OFF

Cat. No. CD250 Shown with ON/OFF Face and Scene Control Face

ON OFF

ON OFF

ON OFF

ON OFF

120V LINE-BLACK

DALILoop Wires

NEUTRAL-WHITE

277 LINE-ORANGE

RED

PURPLE PURPLE

BLACK

DALI Controllerfor On/Off, Dimming and

Scene Control

CD100Power Supply

DALI Ballast

DALI Ballast DALI Ballast

*DALI Loop wires are polarity independant*Controllers and Power supply can be connected at any point on the Dali Loop

Typical DALI Loop

ON OFF

ON OFF

ON OFF

ON OFF

1.76 (44.7mm)

4.41

(11

2.0m

m)

3.81

(96

.8m

m)

3.28

(83

.3m

m)



Commercial Grade

MNI06-1LW

MNI15-1LW

Monet™ Architectural Specification Grade Scene-Capable Controls 120V & 277V AC 60HzLow-profile Architectural Decora Digital Preset Slide Dimmers with LED locator light. All Monet dimmersprovide single-pole (1 location) and 3-way (multi-location) control with Switching Remote, plus SceneCapabilities when used with Monet Scene Controller units.

Incandescent 120V ACDESCRIPTION CAT. NO. RATING COLOR CHANGE KIT*Monet Dimmer (narrow fin) MNI06-1LW 600W I, W, A, G, E, B

Monet Dimmer (narrow fin) MNI10-1LW 1000W I, W, A, G, E, B

Monet Dimmer (wide fin) MNI15-1LW 1500W I, W, A, G, E, B

Low-Voltage 120V ACDESCRIPTION CAT. NO. RATING COLOR CHANGE KIT*Monet Dimmer (narrow fin) Electronic MNE04-1LW 400VA (300W) I, W, A, G, E, B

Monet Dimmer (narrow fin) Magnetic MNM06-1LW 600VA I, W, A, G, E, B(450W)

Monet Dimmer (narrow fin) Magnetic MNM10-1LW 1000VA I, W, A, G, E, B(750W)

Monet Dimmer (wide fin) Magnetic MNM15-1L 1500VA I, W, A, G, E, B(1125W)

MarkX™ Fluorescent BallastFor Advance Mark X™ fluorescent dimming ballasts.

DESCRIPTION CAT. NO. RATING COLOR CHANGE KIT*Monet Mark X Fluorescent Dimmer MNX10-1LW 1000VA (750W) I, W, A, G, E, B(narrow fin) 120V AC

Monet Mark X Fluorescent Dimmer MNX15-1LW 1500VA (1125W) I, W, A, G, E, B(wide fin) 120V AC

Monet Mark X 277V Fluorescent Dimmer MNX20-7LW 2000VA (1500W) I, W, A, G, E, B(narrow fin) 277V AC

Monet Mark X 277V Fluorescent Dimmer MNX30-7LW 3000VA (2250W) I, W, A, G, E, B(wide fin) 277V AC

Fan Speed Controls 120V ACDESCRIPTION CAT. NO. RATING COLOR CHANGE KIT*Monet Fan Speed Control (narrow fin) MNF07-1LW 7.5A 120V AC I, W, A, G, E, B

Monet Fan Speed Control (wide fin) MNF10-1LW 10A 120V AC I, W, A, G, E, B

Monet™ ProductsDESCRIPTION CAT. NO. RATING COLOR CHANGE KIT*Monet Scene-Capable Digital MNS10-1LW 1000VA (750W) I, W, G, E, AMulti-Location Switch— 120 VAC Magnetic Non-Dimming, Lighted Low-Voltage, Magnetic (narrow fin) and Electronic Fluorescent

Monet Remote Non-Dimming Switching MN00R-D0W No load rating, I, W, G, E, AUnit for 3-Way Applications use with 120V & 277V(Unlighted) Monet dimmers only

Color Change Kits for MN00R-10W Monet MNK0R-00 — I, W, G, E, A3-Way Switching Unit

Color Change Kit for Narrow Fin Monet MNKIT-SL — I, W, A, G, E, BScene-Capable Controls

Color Change Kit for Wide Fin Monet MNKIT-LL — I, W, A, G, E, BScene-Capable Controls

Monet Adapter Plate: Allows any Decora MN0LA-000 — Metal strap-mount device to be ganged with (large) Heat Sinkeither small or large-size Monet controls. MN0SA-000In multi-gang installations, must use on ends (small)

Note: Mark X™ is a trademark of the Advance Transformer Company.Note: Sharing a neutral wire may cause flickering. Connect all dimmers to the same phase or run a separate neutral toeach phase. Consult Leviton Techline if problems persist.Digital Lighting and Fan Speed Controls are polarity sensitive devices. Always follow the wiring instructions included witheach device.They can be used in conventional 3-way and 4-way wiring circuits only when the Control is properly connectedto the load as indicated by the device’s wiring instructions.

CAUTION ON RETROFITS: When retrofittingMark X dimming ballasts into fixtures that orig-inally had Instant Start ballasts, the socketsMUST be replaced with Rapid Start sockets toallow proper dimmer operation and preventdamage to the dimming ballast. Refer to theinstructions provided with the ballast and theLeviton Mark X dimmer.

NOTE: Multi-gang wallplates areavailable for combining narrow andwide dimmers, with or without finsremoved. Refer to page O13.

Monet Architectural Fin WidthNarrow: 2.75" (69.9 mm)Wide: 4.25" (108.0 mm)

Architectural Specification Architectural Specification



Commercial Grade

MNM10-1LW

MNX15-1LW

Architectural Specification Architectural Specification

Monet™ Scene Capable Controls SPECIFICATIONS & FEATURES• Premier Architectural Specification Grade dimmer combines high load capability, esthetic appearance,

digital circuitry and Scene Lighting capabilities

• Provides single-pole and 3-way switching with Monet Non-Dimming Remote Unit

• Can be used with 7-Scene Controller for scene lighting applications

• Low-profile architectural fins, even on wide-fin models, for a flush fit appearance

• Smooth slide-dimming operation. Push slider for ON/OFF preset

• Digital circuit provides Soft-ON/Fade-OFF for eye-pleasing effect and prolonged bulb life

• Specially designed to minimize shadows with non-reflective, easy-to-clean matte finish. Ideal for museums, art galleries, showrooms

• Soft, green locator LED discretely positioned on slider

• Square Law Dimming ensures linear slide control across entire dim and bright output range

• Hidden air-gap switch; slider moves into hidden keyway to access air-gap switch for servicing needs.When air gap switch is open, red line appears at top

• Small and large size adapter plates fit all Leviton Decora straps to make them compatible with Monet wallplates

• Screwless, designer Monet wallplates with matte finish included. Multi-gang wallplates also available for combining narrow and wide dimmers, with or without fins removed (see page O16)

• Customized wallplate engravings available–See your Leviton representative for more information

• Built-in radio/TV interference filter

• Protected memory during temporary power failures

• Internal MOV for surge protection

TESTING & CODE COMPLIANCE• UL Listed (File #E-31373)• CSA Certified (File #LR-3413)• Backed by a Limited Two-Year Warranty

*COLORBasic Cat. No. denotes White device. For other colors, order Color Change Kits and add suffix for availablecolors: Ivory (-I), White (-W), Gray (-G), Black (-E), Almond (-A) and Brown (-B)

MATERIAL CHARACTERISTICSEnvironmental: Flammability UL-94, V2 RatingOperating Temperature: 32°F to 130°F

Note: For fin removal and switchbox requirements for ganging Leviton Monet dimmers, refer to page O13 or theinstruction sheet provided with the device.

4.72

(11

9.9

mm

)

2.64

(67

.1 m

m)

1.57 (39.9 mm)

0.24 (6.1 mm)

1.94 (49.3 mm)

2.75 (69.9 mm)

MONET CONTROLS WITH NARROW FINS

2.64

(67

.0 m

m)

4.72

(11

9.8

mm

)

1.57

0.24 (6.1 mm)

1.94(49.3 mm)

4.25 (108.0 mm)

MONET CONTROLS WITH WIDE FINS

Use Leviton Power Extenders to extendthe load capacity of box-mounted dim-mers. Leviton Power Extenders are available for incandescent, magnetic low-voltage, electronic low-voltage, AdvanceMark X™ fluorescent dimming ballasts orequivalents, and 0–10 VDC dimmable flu-orescent ballasts such as Advance MarkVII™, OSRAM Sylvania Quicktronic Heliosor equivalent ballasts.

See Page O6 for more information onLeviton Power Extenders



Architectural Specification Architectural Specification Commercial Grade

MN00C-1LW in 80301-W

Scene Controller for Monet™ and Mural™Scene Capable Lighting Controls

DESCRIPTION CAT. NO. RATING COLOR*

Scene Controller: MN00C-1LW No load rating, White, for 7 Lighting-Scene Buttons plus use with 120V Monet/ other colors and OFF and Group DIM Mural Scene use Color BRIGHT Buttons dimmers only Change Kits

Scene Controller: Same as above except MN00C-7LW No load rating, White, for other rated for 277V dimmers use with Monet colors use Color

277V dimmers only Change Kits

Color Change Kits with Text for DCKS7-00 — I, W, A, G, E MN00C-1LW Scene Controller

Scene Enhancement Products — Compatible with Monet™ andMural™ Scene Capable Lighting Controls


Signal Repeater—Must be used if 17100-1WY, No load rating (Non-color item)controlling lighting on more 17100-2WY than one circuit. One-Way and Two-Way versions available

Contact Closure Interface—Allows control 177BI No load rating (Non-color item) of Mural Scene Capable devices from home theater and building control systems via momentary contact inputs

Occupancy Sensor Control Bridge— 177OC No load rating (Non-color item) Operates Scene devices in conjunctionwith any Leviton Occupancy Sensor

Infrared Receiver—Available with 177IR-IWA No load rating Supplied with Ivory, Wall Mount and Ceiling Mount Bezels White and Almond bezels

Hand-Held Infrared Remote Control— 177RC No load rating Blackwith 4 Scene Buttons plus OFF

Note: A Repeater must be used on any installation that uses more than one circuit.

SPECIFICATIONS & FEATURESScene Controller• Sends commands for up to seven distinct

scenes to individual Mural Scene CapableDimmers

• Multiple Scene Controllers can be used formulti-point access to scenes.

• Provides OFF button and two arrow-shapedbuttons for group Dim and Bright control

• Local Dim/Bright adjustment on individualscene dimmers will not effect programmedscene settings.

• Green LED display for each scene button indi-cates selected scene

• Fast, easy scene programming: Press scenebutton on MN00C, adjust individual level onMural Scene Capable dimmer, press programbutton on dimmer

• Controls up to 20 scene dimmers per circuit• Streamlined, popular Decora styling enhances

any interior and adds a “family look” whenganged with any Decora device

• Works with Monet, Decora Plus or any stan-dard Decora wallplate

• Color change kits available in ivory, white,almond, gray, and black allow fast colorchangeover and simplify stocking inventory

• Internal MOV for surge protection• Customized lettering for each scene button

available (maximum of 8 characters andspaces) — see your Leviton representative forordering information

Scene Enhancement Products • Two-Way Repeater provides scene control

communication link between branch circuits.One-Way Repeater allows the creation of separate scene control zones

TESTING & CODE COMPLIANCE• UL Listed (File #E-31373 – Cat. Nos. MN00C

and 177IR; File #E-66800 – Cat. Nos. 17100-1WY and 17100-2WY; File #E-600800 – Cat.Nos. 177BI and 177OC)

• CSA Certified (File #LR-3413)• Backed by a Limited Two-Year Warranty

*COLORBasic Cat. No. denotes White device. For other colors,order Color Change Kits and add suffix as follows: Ivory(-I), White (-W), Gray (-G), Black (-E), and Almond (-A).


1.76 (45.0 mm)

2.69

(6

8.2

mm

)

3.28

(83

.3 m

m)

4.40

(11

2.0

mm

)

1.40 (35.5 mm)

1.60 (40.6 mm)

SCENE 1

SCENE 3

SCENE 2

SCENE 4

SCENE 5 SCENE 6

SCENE 7 OFF

MONET SCENE CONTROLLERCat. No. MN00C-1LW, -7W



MNI10-10W

MNS20-1LW


Monet™ Architectural Specification Grade ControlsNon-Scene Capable 120 & 277V AC 60HzFor applications where scene capability is not required, Monet single-pole incandescent dimmers andsingle-pole, 3-way and 4-way switches are available.

Monet Non-Scene Capable DevicesDESCRIPTION CAT. NO. RATING COLOR*Monet Incandescent Dimmer, Single-Pole, MNI06-10W 600W 120V AC I, W, A, G, EUnlighted (narrow fin) Incandescent only

Monet Incandescent Dimmer, Single-Pole, MNI10-10W 1000W 120V AC I, W, A, G, EUnlighted (narrow fin) Incandescent only

Color Change Kit for Monet Non-Scene-Capable MNKIT-S0 — I, W, A, G, EIncandescent Dimmers

Monet Single-Pole Rocker Switch with Screw MNS20-1L 20A 120V AC I, W, A, G, ETerminals, Lighted (narrow fin)

Monet 3-Way Rocker Switch with Screw MNS20-D3 20A 120/277V AC I, W, A, G, ETerminals, Unlighted (narrow fin)

Monet 4-Way Rocker Switch with Screw MNS20-D4 20A 120/277V AC I, W, A, G, ETerminals, Unlighted (narrow fin)

SPECIFICATIONS & FEATURES• Low-profile architectural fins for flush fit appearance• Specially designed to minimize shadows with non-reflective, easy-to-clean matte finish. Ideal for

museums, art galleries, showrooms• Screwless, designer Monet plates with matte finish included. Multi-gang wallplates also available for

combining narrow and wide fin Monet devices, with or without fins removed (see page O13)• Customized wallplate engravings available—See your Leviton representativeDimmers• Digital circuit provides soft-ON/fade-OFF for eye-pleasing effect and prolonged bulb life• Built-in radio/TV interference filter• Protected memory during temporary power failures• Internal MOV for surge protection


*COLORFor Monet Incandescent Dimmers listed above, basic Cat. No. denotes White device. For other colors, orderColor Change Kits and add suffix as follows: Ivory (-I), White (-W), Gray (-G), Black (-E) and Almond (-A).Monet Rocker Switches listed above do not use Color Change Kits–Add suffix to basic Cat. No. for colorselection.

MATERIAL CHARACTERISTICSEnvironmental: Flammability UL-94, V2 RatingOperating Temperature: 32°F to 130°FNote: For fin removal and switchbox requirements for ganging Leviton Monet dimmers, refer to page O13 or theinstruction sheet provided with the device.

4.72

(11

9.9

mm

)

2.64

(67

.1 m

m)

1.57 (39.9 mm)

0.24 (6.1 mm)

1.94 (49.3 mm)

2.75 (69.9 mm)

Cat. Nos. MNI06-10 and MNI10-10

2.75 (69.9 mm)

.40 (10.2 mm)

1.04 (26.4 mm)

3.28

(83

.3 m

m)

4.72

(11

9.8

mm

)

2.60

(66

.0 m

m)

Cat. No. MNS20-1L






1.32(33.5 mm)

3.12 (79.2 mm)

6.00 (152.4 mm) 0.161(4.1 mm)

2.64

(67

.1 m

m)

4.85

(12

3.2

mm

)

Monet multi-gang wallplates are available for every permissible combina-tion of small fin and large fin dimmers.Tables 1 and 2 can be used to deter-mine if a specific combination of devices is possible.When small and largefin devices are combined, all the large fin devices must be placed to oneside and all the small fin devices must be placed to the other side. In aninstallation where all the fins are broken off, do not remove the fins from thedimmers at each of the extreme ends of the installation.

Monet Multi-Gang Wallplates

Table 1 — For Installations with No Fins Broken Off

Wallplate Cat. No. Number of Narrow Wallbox Fin/Wide Fin RequirementsControls

MNW10-00 1 Narrow 1-Gang






MNW01-00 1 Wide 1-Gang




MNW11-00 1 Narrow/1 Wide 4-Gang










Cat. No. MNW20-00

Table 2 — For Installations with Fins Broken Off

Wallplate Cat. No. Number of Narrow Wallbox Fin/Wide Fin RequirementsControls

MNW20-FB 2 Narrow 2-GangMNW30-FB 3 Narrow 3-GangMNW40-FB 4 Narrow 4-GangMNW50-FB 5 Narrow 5-Gang

MNW60-FB 6 Narrow 6-Gang




MNW02-FB 2 Wide 3-Gang




MNW11-FB 1 Narrow/1 Wide 3-Gang




















Monet Multi-Gang Wallplate Catalog Number System

Example: MNW31-00WAdd letter to indicate color:-I (Ivory), -W (White), -A (Almond), -G (Gray) and -E (Black)

00 = No fins removedFB = Fins broken off

Number of large-fin devices

Number of small-fin devices

Monet Wallplate

Maximum Load per Monet Dimmer Multi-Gang with Fins Broken Off

Cat. No. Single 2-Gang More than 2-Gang

MNI06 600W 500W 400W

MNI10 1000W 800W 700W

MNI15 1500W 1250W 1000W

MNM06 600VA (450W) 500VA (375W) 400VA (300W)

MNM10 1000VA (750W) 800VA (600W) 700VA (525W)

MNM15 1500VA (1125W) 1250VA (937W) 1000VA (750W)

MNX10 1000VA (750W) 800VA (600W) 700VA (525W)

MNX15 1500VA (1125W) 1250VA (937W) 1000VA (750W)

MNF07 7.5A 6A 5.3A

MNF10 10A 8A 7A

MNX20 2000VA (1500W) 1600VA (1200W) 1400VA (1050W)

MNX30 3000VA (2250W) 2500VA (1875W) 2000VA (1500W)

MNS10 1000VA (750W) 800VA (600W) 700VA (525W)

MNE04 400VA (300W) 300VA (225W) 250VA (188W)

Note: For more information on Fin Removal, refer to the instruction sheet provided with each Monet device.



Commercial Grade

80800-I

81500-W

Renoir™ Incandescent Architectural Preset Slide Dimmers 120V AC 60Hz OnlyDESCRIPTION CAT. NO. RATING COLOR*

Renoir Single-Pole (narrow fin) 80800 800W I, W, GY

Renoir 3-Way (narrow fin) 80800-3 800W I, W, GY

Renoir Single-Pole (narrow fin) 81000 1000W I, W, GY

Renoir Single-Pole, Illuminated (narrow fin) 81000-L 1000W I, W

Renoir 3-Way (narrow fin) 81000-3 1000W I, W, GY

Renoir 3-Way, Illuminated (narrow fin) 81000-L3 1000W I, W

Renoir Single-Pole (wide fin) 81500 1500W I, W, GY

Renoir 3-Way (wide fin) 81500-3 1500W I, W, GY

Renoir Single-Pole (wide fin) 82000 2000W I, W, GY

Renoir Single-Pole, Illuminated (wide fin) 82000-L 2000W I, W

Renoir 3-Way (wide fin) 82000-3 2000W I, W

Renoir 3-Way, Illuminated (wide fin) 82000-L3 2000W I, W

Renoir™ Magnetic Low-Voltage Architectural Preset Slide Dimmers120V 60Hz OnlyRenoir Single Pole (narrow fin) 71111 1000VA (750W) I, W, GY

Renoir 3-Way (narrow fin) 71113 1000VA (750W) I, W, GY

Renoir Single Pole (wide fin) 71511 1500VA (1125W) I, W, GY

Renoir 3-Way (wide fin) 71513 1500VA (1125W) I, W, GY

All devices are UL Listed and CSA Certified.

Note: For complete information on installation, ganging and derating of High Wattage Dimmers, consult Technical Sectionof this catalog or the Dimmer Instruction Sheet provided with the device.Note: Sharing a neutral wire may cause flickering. Connect all dimmers to the same phase or run a separate neutral toeach phase. Consult Leviton Techline if problems persist.When ganging these units, no derating is necessary except on those units, which have had both sets of snap-off, finsremoved.These shall be derated as follows:

81000 series, 71111 series ____800 Watts/VA max. per unit

81500 series, 71513 series ___1300 Watts/VA max. per unit

82000 series_________________1800 Watts max. per unit

1.92 (48.8 mm)

1.05 (26.7 mm)

2.88 (73.2 mm)1.30

(33.0 mm)

4.63

(11

7.6

mm

)

2.63

(66

.8 m

m)

RENOIR NARROW-FIN DEVICECat. No. 81000

SPECIFICATIONS & FEATURES• ON/OFF rocker switch turns lights ON at last

selected brightness level• Smooth-action, linear slide control for easy,

precise operation• Available in single-pole (one location) and 3-

way (multi-location) versions. 3-way dimmer isused with standard 3-way ON/OFF switch

• Decora-styling coordinates with Leviton’sextensive line of Decora devices

• Decora-style screwless snap-on wallplate pre-sent an attractive appearance in any applica-tion

• Slim, compact housing easily fits in standardwall boxes

• Fins are easily removed for multi-gang applications

• Large radio/TV interference filter• Illuminated versions available


*COLORAdd suffix to catalog numbers as follows for color selec-tion: Ivory (-I) White (-W), Gray (-GY).


NOTE: For fin removal and switchboxrequirements for ganging Leviton Renoirdimmers, refer to page O18.

Renoir Architectural Fin WidthNarrow: 2.88" (73.2 mm)Wide: 4.69" (119.1 mm)

Architectural SpecificationMulti-LocationArchitectural SpecificationMulti-Location



NOTE: For fin removal and switchboxrequirements for ganging Leviton Renoirdimmers, refer to page O18.

Renoir Architectural Fin WidthNarrow: 2.88" (73.2 mm)Wide: 4.69" (119.1 mm)

SPECIFICATIONS & FEATURES• Rugged ON/OFF rocker switch turns lights ON

at last selected brightness level• Smooth-action, linear slide control for easy,

precise operationr• Cat. No. 26666-31, -37 provides single-pole

(one location) and 3-way (multi-location) dimming. 3-way dimmer is used with standard3-way ON/OFF switch

• Manual low-end trim adjustment feature on fanspeed controls allows precise adjustment oflow-end fan settings when installing device

• Decora-styling coordinates with Leviton’sextensive line of Decora devices

• Decora-style screwless snap-on wallplate present an attractive appearance in any application

• Slim, compact housing easily fits in standardwall boxes

• Fins are easily removed for multi-gang applications

• Large radio/TV interference filter

TESTING & CODE COMPLIANCE• UL Listed (File # E-31373) • CSA Certified (File #LR-3413)• Backed by a Limited Two-Year Warranty

*COLORAdd suffix to catalog numbers as follows for color selec-tion: Ivory (-I) White (-W), Gray (-GY).


Renoir™ Architectural Preset Slide Dimmers Fluorescent Dimming Ballasts 120V and 277V AC 60Hz OnlyDESCRIPTION CAT. NO. RATING COLOR*

Renoir Fluorescent Dimmer, 26666-31 1200VA (900W) 120V AC WhiteSingle-Pole and 3-Way Advance Mark X(wide-fin) fluorescent dimming ballast

Renoir Fluorescent Dimmer, 26666-37 1200VA (900W) 277V AC WhiteSingle-Pole and 3-Way Advance Mark X(wide-fin) fluorescent dimming ballast

Renoir™ Fluorescent Architectural Preset Slide Dimmers Magnetic Ballasts 120V and 277V AC 60Hz OnlyRenoir Single-Pole (narrow-fin) 86676-1 120V 2-12 40W Rapid Start Lamps I, W

Renoir Single-Pole (narrow-fin) 86677-1 120V 4-20 40W Rapid Start Lamps I, W

Renoir Single-Pole (wide-fin) 86678-1 120V 6-30 40W Rapid Start Lamps I, W






Renoir™ Architectural Preset Slide Fan Speed Controls 120V AC 60Hz OnlyRenoir Single-Pole (narrow-fin) 80827 7.5 Amps I, W

Renoir Single-Pole (wide-fin) 81127 10 Amps I, W

Renoir Single-Pole (wide-fin) 81527 15 Amps I, W


1.92(48.8 mm)

1.05 (26.6 mm)

4.69 (119.1 mm)

1.30(33.0 mm)

4.62

(11

7.5

mm

)

2.63

(66

.7 m

m)

RENOIR WIDE-FIN DEVICECat. No. 26666-3

Note: Sharing a neutral wire may cause flickering. Connect all dimmers to the same phase or run a separateneutral to each phase. Consult Leviton Techline if problems persist.

CAUTION ON RETROFITS: When retrofitting Mark X dimming ballasts into fixtures that originally had Instant Start bal-lasts, the sockets MUST be replaced with Rapid Start sockets to allow proper dimmer operation and prevent damage tothe dimming ballast. Refer to the instructions provided with the ballast and the Leviton Mark X dimmer.

Architectural SpecificationMulti-LocationArchitectural SpecificationMulti-LocationCommercial Grade

86676-1I

81527-W



60800-W

61000-W

Commercial Grade

VAN GOGH WIDE-FIN DEVICECat. No. 62000

Van Gogh Architectural Fin WidthNarrow: 2.75" (69.9 mm)Wide: 4.56" (115.8 mm)

SPECIFICATIONS & FEATURES• Classic rotary architectural-style dimmer is a

popular choice in many installations• Available in Rotary ON/OFF (single pole only)

and Push-ON/Push-OFF (single-pole and 3-way).

• 3-way version is used with a standard 3-wayON/OFF switch

• Snap-on cover conceals heat fins• Color-matched dimmer control knob with gold

insert for an attractive appearance in anyinstallation

• Snap-off fins permit easy ganging with otherdevices

• Slim, compact housing easily fits in standardwall box


TESTING & CODE COMPLIANCE• UL Listed (File #E-31373, 62000 File

#E-66800) • CSA Certified (File #LR-3413)• Backed by a Limited Two-Year Warranty

*COLORAdd suffix to catalog numbers as follows for color selec-tion: Ivory (-I) White (-W).


Note: For switchbox requirements for ganging Leviton Van Gogh dimmers, refer topage O18.

Van Gogh™ Incandescent Architectural Rotary Dimmers 120V AC 60Hz OnlyDESCRIPTION CAT. NO. RATING COLOR*

Van Gogh Single-Pole Rotary (narrow fin) 60800 800W I, W

Van Gogh 3-Way Push ON/Push OFF (narrow fin) 60800-3 800W I, W

Van Gogh Single-Pole Rotary (narrow fin) 61000 1000W I, W

Van Gogh 3-Way Push ON/Push OFF (narrow fin) 61000-3 1000W I, W

Van Gogh Single-Pole Rotary (wide fin) 61500 1500W W

Van Gogh Single-Pole Rotary (wide fin) 62000 2000W I, W

Note: Sharing a neutral wire may cause flickering. Connect all dimmers to the same phase or run a separate neutral toeach phase. Consult Leviton Techline if problems persist.When ganging these units, no derating is necessary except on those units, which have had both sets of snap-off, finsremoved.These shall be derated as follows:

61000, 61000-3 _______________800 Watts max. per unit

61500 ______________________1300 Watts max. per unit

62000 series_________________1800 Watts max. per unit

Covers to fit 60800, 61000 Dimmer Units DESCRIPTION CAT. NO.

Brown Cover and Matching Knob w/Gold Insert 60001

Ivory Cover and Matching Knob w/Gold Insert 60001-I

White Cover and Matching Knob w/ Silver Insert 60001-W

Covers to fit 61500, 62000 Dimmer Units DESCRIPTION CAT. NO.

Brown Cover and Matching Knob w/Gold Insert 60002

Ivory Cover and Matching Knob w/Gold Insert 60002-I

White Cover and Matching Knob w/ Silver Insert 60002-W


4.50

(11

4.3

mm

)

2.75 (69.9 mm)

2.69

(68

.3 m

m)

0.81 (20.6 mm)

1.50

0 (3

8.1)

1.28 (32.5 mm)

VAN GOGH NARROW-FIN DEVICECat. No. 61000

4.50

(11

5.3

nm

m)

4.56 (115.8 mm)

2.69

(68

.3 m

m)

0.81 (20.6 mm) 1.50

(38

.1 m

m)

1.28 (32.5 mm)




6676-1W

6678-1W

SPECIFICATIONS & FEATURES• Classic rotary architectural-style dimmer is a

popular choice in many installations• Available in Rotary ON/OFF (single pole only)

for magnetic fluorescent and fan speed con-trol

• Snap-on Decora-style cover hides heat fins• Color-matched dimmer control knob with gold

insert for an attractive appearance in anyinstallation

• Snap-off fins permit easy ganging with otherdevices

• Slim, compact housing easily fits in standardwall box


TESTING & CODE COMPLIANCE• UL Listed (File # E-31373, replacement knobs

UL File # E-3810) • CSA Certified (File # LR-3413, 6676-1, -7 only)• Backed by a Limited Two-Year Warranty

*COLORAdd suffix to catalog numbers as follows for color selec-tion: Ivory (-I) White (-W).


Note: For switchbox requirements for ganging Leviton Van Gogh dimmers, refer topage O18.

Van Gogh Architectural Fin WidthNarrow: 2.75" (69.9 mm)Wide: 4.56" (115.8 mm)

Van Gogh™ Fluorescent Architectural Rotary Dimmers Magnetic Ballasts 120V and 277V AC 60Hz OnlyDESCRIPTION CAT. NO. RATING COLOR*

Van Gogh Single-Pole Rotary 6676-1W 120V 2-12 40W White(narrow fin) Rapid Start Lamps


Van Gogh Single-Pole Rotary 6678-1W 120V 6-30 40W White(wide fin) Rapid Start Lamps






Van Gogh™ Architectural Rotary Fan Speed Control 120V AC 60Hz OnlyDESCRIPTION CAT. NO. RATING COLOR*

Van Gogh Single-Pole 61027 10 Amps I, W

Note: When more than one ceiling fan is controlled, make sure the blades are rotating on all fans.

Covers to fit 6676 & 6677 Dimmer UnitsDESCRIPTION CAT. NO.Brown Cover and Matching Knob w/Gold InsertH 60001

Ivory Cover and Matching Knob w/Gold InsertH 60001-I

White Cover and Matching Knob w/Silver InsertH 60001-W

Covers to fit 6678 & 6679 Dimmer UnitsDESCRIPTION CAT. NO.Brown Cover and Matching Knob w/Gold InsertH 60002

Ivory Cover and Matching Knob w/Gold InsertH 60002-I

White Cover and Matching Knob w/Silver InsertH 60002-W

UL Listed and CSA Certified except where indicated by H

4.50

(11

4.3

mm

)

2.75 (69.9 mm)

2.69

(68

.3 m

m)

0.81 (20.6 mm)

1.50

0 (3

8.1)

1.28 (32.5 mm)

VAN GOGH NARROW-FIN DEVICECat. No. 6676-1W

Architectural SpecificationMulti-LocationArchitectural SpecificationMulti-LocationCommercial Grade



Commercial GradeGanging and DeratingLighting ControlsGanging and DeratingLighting Controls

Note: For information on ganging and derating Monet™ ArchitecturalLighting Controls, see page O13.

Maximum Load Per Dimmer for Multi-Ganging All Strap-Mounted Dimmers

Chart 1Dimmer Rating Single 2-Gang More than 2-Gang

600W 600W 500W 400W

1000W 1000W 800W 700W

400VA 400VA 300VA 250VA

600VA 600VA 500VA 400VA

1000VA 1000VA 800VA 700VA

Ganging and Derating Box-Mounted Lighting ControlsGanging is an installation practice where two or more lighting controls aremounted side-by-side using the required number of connected wallboxes.Ganging may require the removal of part of the fins on ArchitecturalDimmers or part of the mounting strap on strap-mounted devices. InArchitectural Dimmers, the metallic fins help dissipate heat from withinthe device. Strap mounted dimmers use the mounting strap for the samepurpose.Therefore, removing a portion of the fins or strap for gangingpurposes will require derating the dimmers to prevent them from over-heating.

Ganging and Derating Leviton Lighting ControlsWhen ganging Mural, True Touch, TouchPoint, ToggleTouch andIllumaTech controls, the side sections of the mounting strap must beremoved. Use pliers to carefully bend side sections back and forth untilthey break off. The side sections of the strap dissipate heat, so remov-ing them requires derating the dimmer’s capacity. See Chart 1.

Note that Leviton SureSlide and Trimatron lighting controls can beganged without removing any sections of their mounting straps.However, SureSlide and Trimatron controls must also be derated whenthey’re ganged.

Ganging and Derating Leviton Renoir™ and Van Gogh™ Architectural Lighting ControlsWhen fins are broken off on wide and narrow controls for ganging purposes, the number of switch boxes required can be quickly determined byreferring to the two charts below.

Maximum Bulb Wattage at 75% EfficiencyChart 2Dimmer Rating Single 2-Gang More than 2-Gang

600VA 450W 375W 300W

1000VA 750W 600W 525W

Maximum Bulb Wattage for Magnetic Low-Voltage LightingLow-voltage lighting controls are rated in Volt-Amps (VA). The maximumbulb wattage is determined by the efficiency of the transformer in thelow-voltage lighting system. Transformer efficiencies vary depending onthe manufacturer, so consider 75% efficiency as average. Use Chart 2to determine the maximum bulb wattage for typical transformer effi-ciency ratings.

Switch boxes required for ganging Leviton architectural controls when no fins are removed:

Switch boxesrequired forganging Leviton architectural controls whenall inside finsare removed:

*Narrow controls must have fins broken off to be ganged.

Number of Narrow Controls

0 0 1 2 3 4 5 6

0 0 1 2 3 4 5 6

1 1 3 4 5 6 7 8

2 3 5 6 7 8 9 10

3 5 7 8 9 10 11 12

4 7 9 10 11 12 13 14

5 9 11 12 13 14 15 16

6 11 13 14 15 16 17 18Num

ber

of W

ide

Co

ntr

ols

Number of Narrow Controls*

0 0 1 2 3 4

0 • • • • •

1 1 3 5 7 8

2 4 6 7 9 11

3 7 9 10 11 13

4 9 11 12 14 16Num

ber

of W

ide

Con

trol

s

Ganging DeratingAny Architectural Dimmer that has had both sets of break-off finsremoved to meet space requirements during installation must have itswattage specification derated as shown in the chart below. If no fins areremoved, no derating is necessary, even when ganging.

Incandescent

Cat. No. Watts Derate To

61000, 81000 1000 800W

61500, 81500 1500 1300W

62000, 82000 2000 1800W

Fluorescent

When ganging these units, no derating is necessary, except as shown below when both sets of fins have been removed.

6677 – 16 lamps 86677 – 16 lamps

6679 – 36 lamps 86679 – 36 lamps



Mural Lighting ControlsMural Lighting ControlsCommercial Grade

MCM06-1LW in 80301-W

SPECIFICATIONS & FEATURES• Responds to lighting level commands sent by

the Cat. No. MN00C-1LW Scene Controller.Users can program the desired lighting levelfor individual Mural Scene Dimmers in up toseven distinct lighting scenes, which are easily accessed by one or more SceneControllers

• Smooth ON/OFF and Dim/Bright Decorarocker action provides ease of operation forpeople of all ages and abilities

• Scene Controller also provides an OFF buttonand two arrow-shaped buttons for group Dimand Bright control.

• Local Dim/Bright adjustment on individualscene dimmers will not effect programmedscene lighting settings

• Compatible with Scene EnhancementProducts including Contact Closure Interface,Infrared Hand-Held Remote and InfraredReceiver, and one-way and two-way SignalRepeater

• Streamlined, popular Decora stylingenhances any interior and adds a “family look”when ganged with any Decora device

• Digital circuitry provides SOFT-ON/FADE-OFF operation for an eye-pleasing effect andprolonged lamp life

• Square green LED display alongside rockerindicates selected brightness level

• Locator LED illuminates when lights are OFF• Color change kits available in a wide range of

choices, making it easy and economical tochange decorating schemes

• Color change kits simplify inventory for distrib-utors and contractors who can offer a com-plete range of colors without stocking adifferent device for each one

• Minimum Brightness Adjustment sets com-fortable minimum light level

• Protected memory and voltage compensationmaintain light levels after power outages andduring minor power fluctuations

• Built-in radio/TV interference filter• ON/OFF AC air-gap switch completely discon-

nects power to unit for bulb changing orremoval from service

TESTING & CODE COMPLIANCE• UL Listed (File #E-31373)• CSA Certified (File #LR-3413)• Backed by a Limited Two-Year warranty



Mural™ Scene Capable Decora-Style Digital Dimmer 120V AC 60Hz Only Compatible with Scene Controller and Scene Enhancement Products —See page O11.

DESCRIPTION CAT. NO. RATING COLOR CHANGE KIT*

Mural Scene Capable Incandescent/Magnetic MCM06-1LW 600W/VA I, W, A, G, ELow-Voltage Dimmer with LED Locatorand LED Brightness Display

Mural Scene Capable Incandescent/Magnetic MCM10-1LW 1000W/VA I, W, A, G, ELow-Voltage Dimmer with LED Locatorand LED Brightness Display

Mural Scene Capable Mark X Preset Dimmer MCX10-1LW 1000VA I, W, A, G, Efor 120V AC Advance Mark X™ (750W)Fluorescent Dimming Ballast

Scene Controller: 7 Lighting-Scene Buttons MN00C-1LW No load rating, I, W, A, G, Eplus OFF and Group DIM and use with Monet BRIGHT Buttons or Mural Scene

Capable Dimmers Only

Color Change Kits for Mural MC DRKDD-1L — I, W, A, G, EScene Capable Dimmer

Color Change Kits with Text for DCKS7-00 — I, W, A, G, EMN00C-1LW Scene Controller

Note: Sharing a neutral wire may cause flickering. Connect all dimmers to the same phase or run a separate neutral toeach phase. Consult Leviton Techline if problems persist.Digital Lighting and Fan Speed Controls are polarity sensitive devices. Always follow the wiring instructions included witheach device. Mural Scene Capable Digital Controls are designed for use with Scene Controller and Scene Enhancementproducts and are not compatible with the Multi-Remote unit.All devices are UL Listed and CSA Certified.

2.38 (60.5 mm) 1.38 (35.1 mm)

0.21

(5.3 mm)

1.30 (33.0 mm)

4.13

(10

4.9

mm

)

2.62

(66

.6 m

m)

2.67

(67

.8 m

m)

.06

(1.5 mm)

MURAL SCENE CAPABLE DIMMERCat. No. MCM10-1LW

Use Leviton Power Extenders to extend the load capacity of box-mounted dimmers. Leviton Power Extendersare available for incandescent, magnetic low-voltage, electronic low-voltage, Advance Mark X™ fluorescentdimming ballasts or equivalents, and 0–10 VDC dimmable fluorescent ballasts such as Advance Mark VII™,OSRAM Sylvania Quicktronic Helios or equivalent ballasts.


See Page O6 for more information on Leviton Power Extenders



MLI06-1LW in 80301-W

Mural Lighting ControlsMural Lighting ControlsCommercial Grade

Mural™ L/S (Level Set) Decora-Style Preset Digital Dimmer 120V AC 60Hz Only All Mural™ L/S dimmers provide single-pole (1 location) and 3-way (multi-location) control when used with Multi-Remote unit.

DESCRIPTION CAT. NO. RATING COLOR CHANGE KIT*Mural L/S Incandescent LED Locator and MLI06-1LW 600W I, W, A, G, E, BBrightness Display

Mural L/S Incandescent LED Locator and MLI10-1LW 1000W I, W, A, G, E, BBrightness Display

Mural L/S Magnetic Low-Voltage MLM06-1LW 600VA I, W, A, G, E, BLED locator and Brightness Display (450W)

Mural L/S Magnetic Low-Voltage MLM10-1LW 1000VA I, W, A, G, E, BLED locator and Brightness Display (750W)

Mural L/S Electronic Low-Voltage LED MLE03-1LW 350VA (260W) I, W, A, G, E, BLocator and Brightness Display

Mural L/S for Advance Mark X™ MLX06-1LW 600VA (450W) I, W, A, G, E, BFluorescent Dimming Ballast

Mural L/S Quiet Fan Speed Control MLF01-1LW 1.5A I, W, A, G, E, BLED Locator and Brightness Display

Mural L/S Incandescent LED Locator MRI06-1LW 600W I, W, A, G, E(no brightness display)

Mural L/S Incandescent LED Locator MRI10-1LW 1000W I, W, A, G, E(no brightness display)

Mural L/S Magnetic Low-Voltage MRM10-1LW 1000VA I, W, A, G, ELED Locator (no brightness display) (750W)

Multi-Remote Unit for MS00R-10W No load I, W, A, G, E Multi-Location Dimming rating(no LED locator or display)

Multi-Remote Unit for Electronic Low-Voltage MSE0R-10W No load I, W, A, G, E Multi-Location Dimming rating(no LED locator or display)

Color Change Kits for Mural L/S DLKDD-1L — I, W, A, G, E, B (ML versions)

Color Change Kits for Multi-Remote Units DRK0R-00 — I, W, A, G, E (no LED locator or display)

Color Change Kit for Mural L/S (MR versions) MRK0D-0L No load rating I, W, A, G, E


SPECIFICATIONS & FEATURES• Smooth Decora rocker-action for PresetON/OFF switching with built-in arrow-shapedrocker for DIM/BRIGHT control

• Arrow rocker allows user to set brightness levelwhen lights are off

• Second tap on top half of rocker for full bright.Gently double tap bottom half of rocker for fast OFF

• Easy to operate for people of all ages and abilities

• Provides single-pole (one-location) and multi-location full range dimming when used withMulti-Remote units

• Streamlined, popular Decora styling enhancesany interior and adds a “family look” whenganged with any Decora device

• Digital circuitry provides SOFT-ON/FADE-OFFoperation for an eye-pleasing effect and pro-longed lamp life

• Square green LED display alongside rockerindicates selected brightness level on ML models

• Locator LED illuminates when lights are OFF• Color change kits available in a wide range ofchoices, making it easy and economical tochange decorating schemes

• Color change kits simplify inventory for distribu-tors and contractors who can offer a completerange of colors without stocking a differentdevice for each one

• Minimum brightness adjustment sets comfort-able minimum light level

• Power failure recovery assures retention oflighting levels during long-term power interruptions.

• Built-in radio/TV interference filter• ON/OFF AC air-gap switch completely discon-nects power to unit for bulb changing orremoval from service


*COLORBasic Cat. No. denotes White device. For other colors,order Color Change Kits and add suffix as follows: Ivory(-I), White (-W), Gray (-G), Black (-E), Almond (-A) andBrown (-B).


0.21 (5.3 mm)

1.30 (33.0 mm)

2.38 (60.5 mm)

2.62

(16

6.6

mm

)

2.67

(67

.9 m

m)

4.13

(10

4.9

mm

)

1.38 (35.1 mm)

ALL MURAL L/S (LEVEL SET) DIMMERSML Model Shown

Note: Sharing a neutral wire may cause flickering. Connect all dimmers to the same phase or run a separateneutral to each phase. Consult Leviton Techline if problems persist.Digital Lighting and Fan Speed Controls are polarity sensitive devices. Always follow the wiring instructionsincluded with each device.They can be used in conventional 3-way and 4-way wiring circuits only when theControl is properly connected to the load as indicated by the device’s wiring instructions.






Mural Lighting ControlsMural Lighting Controls

MDI10-1LW in 80301-W

Commercial Grade



SPECIFICATIONS & FEATURES• Provides single-pole (one-location) and

multi-location full range dimming when usedwith MS00R remote unit

• Streamlined popular Decora stylingenhances any interior and adds a family lookwhen ganged with other Decora devices

• Smooth ON/OFF and DIM/BRIGHT Decorarocker action provides ease of operation forpeople of all ages and abilities

• Digital circuitry provides Soft-ON/Fade-OFFswitching for and eye-pleasing effect andextended lamp life

• Compatible with Decora screwless andDecora standard designer wallplates

• Locator LED illuminated when lights are OFF

• Color change kits available in a wide rangeof choices, making it easy and economical tochange decorating schemes

• Color change kits simplify inventory for dis-tributors and contractors who can offer acomplete range of colors without stocking adifferent device for each one

• Protected memory and voltage compensa-tion maintain light levels after short-termpower outages and during minor power fluctuations

• Square green LED display alongside rockerindicates selected brightness level on MD models

• Built-in radio/TV interference filter • ON/OFF AC air gap switch completely

disconnects power to unit for bulb changingor removal from service




Mural™ Decora-Style Digital Dimmer 120V AC 60Hz Only All Mural™ dimmersprovide single-pole (1 location) and 3-way (multi-location) control when used with Multi-Remote unit.

DESCRIPTION CAT. NO. RATING COLOR CHANGE KIT*Mural Incandescent LED Locator MDI06-1LW 600W I, W, A, G, Eand Brightness Display

Mural Incandescent LED Locator MDI10-1LW 1000W I, W, A, G, Eand Brightness Display

Mural Magnetic Low-Voltage LED Locator MDM06-1LW 600VA (450W) I, W, A, G, Eand Brightness Display

Mural Magnetic Low-Voltage LED Locator MDM10-1LW 1000VA (750W) I, W, A, G, Eand Brightness Display

Mural Electronic Low-Voltage LED Locator MDE03-1LW 350VA (260W) I, W, A, G, Eand Brightness Display

Mural Quiet Fan Speed Control LED Locator MDF01-1LW 1.5A I, W, A, G, Eand Brightness Display

Mural Incandescent LED Locator MSI06-1LW 600W I, W, A, G, E(no Brightness Display)

Mural Incandescent LED Locator MSI10-1LW 1000W I, W, A, G, E(no Brightness Display)

Mural Magnetic Low-Voltage LED Locator MSM10-1LW 1000VA (750W) I, W, A, G, E(no Brightness Display)

Multi-Remote Unit for Multi-Location Dimming MS00R-10W No load rating I, W, A, G, E(no LED locator or display)

Multi-Remote Unit for Electronic Low-Voltage MSE0R-10W No load rating I, W, A, G, EMulti-Location Dimming (no LED locator or display)


Mural™ Decora-Style Digital Dimmer 220V AC 50Hz AC OnlyDESCRIPTION CAT. NO. RATING COLOR*Mural Incandescent Dimmer MDI10-2LW 1000W I, W, A, G, E

Mural Magnetic Low-Voltage Dimmer MDM10-2LW 1000VA I, W, A, G, E(750W)

Multi-Remote unit for Multi-Location MS00R-20W No load rating I, W, A, G, EDimming (no LED locator or display) —for use with

Mural 220V dimmers

Note: 220V devices are not UL Listed or CSA Certified.

Color Change Kits for Mural™ Dimmers (120V and 220V)DESCRIPTION CAT. NO. COLOR CHANGE KIT*Mural MD with LED Locator and DRKDD-1L I, W, A, G, EBrightness Display

Mural MS with LED Locator DRK0D-1L I, W, A, G, E(no Brightness Display)

Multi-Remote Units DRK0R-00 I, W, A, G, E(no LED Locator or Display)


2.38 (60.5 mm) 1.38 (35.1 mm)

0.21

(5.3 mm)

1.30 (33.0 mm)

4.13

(10

4.9

mm

)

2.62

(66

.6 m

m)

2.67

(67

.8 m

m)

.06

(1.5 mm)

MURAL DECORA-STYLE DIMMERCat. No. MDI10-1LW

Digital Lighting and Fan Speed Controls arepolarity sensitive devices. Always follow thewiring instructions included with eachdevice.They can be used in conventional 3-way and 4-way wiring circuits only whenthe Control is properly connected to theload as indicated by the device’s wiringinstructions.



TPI10-1LW in 80301-W

Commercial Grade



Touch Lighting ControlsTouch Lighting Controls

SPECIFICATIONS & FEATURES• New advanced digital touch pad technology

provides full range dimming by responding towhere your finger is placed on the pad

• Provides single-pole (one-location) and multi-location full range dimming when usedwith MS00R remote unit

• Attractive Decora styling blends with any interior



• Locator LED is illuminated when lights areOFF (no LED on Remote Unit)

• Easy-to-read LED display alongside touchpad indicates selected brightness level

• Minimum Brightness Adjustment sets comfortable minimum light level

• Protected memory maintains light levels after power outages and during minor powerfluctuations



*COLORAdd suffix to catalog number as follows for other colors:Ivory (-I), White (-W), Gray (-G), Black (-E), and Almond(-A).


TouchPoint™ Decora Preset Digital Touch-Pad Dimmer 120V AC 60Hz Only All TouchPoint™ dimmers provide single-pole (1 location) and 3-way(multi-location) control when used with Multi-Remote unit.


TouchPoint Incandescent TPI06-1L 600W I, W, A, G, E

TouchPoint Incandescent TPI10-1L 1000W I, W, A, G, E

TouchPoint Magnetic Low-Voltage TPM06-1L 600VA (450W) I, W, A, G, E

TouchPoint Magnetic Low-Voltage TPM10-1L 1000VA (750W) I, W, A, G, E

TouchPoint Advance Mark X™ TPX06-1L 600VA (450W) I, W, AFluorescent Dimming Ballast

TouchPoint Advance Mark X™ TPX10-1L 1000VA (750W) I, W, AFluorescent Dimming Ballast

Multi-Remote Unit for Multi-Location Dimming MS00R-10W No load White, for (no LED locator or display) rating other colors

use Color Change Kits

Color Change Kits for Multi-Remote Units DRK0R-00 — I, W, A, G, E(no LED locator or display)


2.62

(66

.6m

m)

2.67

(67

.8m

m)

1.38 (35.1 mm)

0.30

(7.6 mm)

0.06 (1.5 mm)

4.13

(10

4.9m

m)

2.38 (60.5 mm)

1.30 (33.0 mm)

TOUCHPOINT DECORA PRESET DIGITAL TOUCH DIMMERCat. No.TPI10-1LW

Note: Sharing a neutral wire may cause flickering. Connect all dimmers to the same phase or run a separateneutral to each phase. Consult Leviton Techline if problems persist.Digital Lighting and Fan Speed Controls are polarity sensitive devices. Always follow the wiring instructionsincluded with each device.They can be used in conventional 3-way and 4-way wiring circuits only when theControl is properly connected to the load as indicated by the device's wiring instructions.



To learn more about Leviton’s outstanding offering of devices visit our Website at: http://www.leviton.com ....Building A Connected WorldO23

TTI10-10W in 80301-W

Touch Lighting ControlsTouch Lighting ControlsResidential Grade



SPECIFICATIONS & FEATURES• Provides fingertip ease of use and precise

adjustment of lighting levels. Simple one-touchfor ON at Preset level, or again for OFF.Touchand hold for BRIGHT/DIM lighting control

• Provides single-pole (one-location) and multi-location full range dimming when used withTT00R remote unit

• Cat. No. 6606 Decora Touch Dimmer is available for single-pole applications only (nosoft-ON/Fade-OFF or multi-location features)

• Attractive Decora styling blends with anyinterior


• Compatible with Decora screwless and Decorastandard designer wallplates

• Locator LED is illuminated when lights are OFF(no LED on Remote Unit)

• Color change kits offered in a wide range ofcolors, making it easy and economical tochange decorating schemes

• Minimum Brightness Adjustment sets comfort-able minimum light level

• Protected memory maintains light levels aftershort-term power outages and during minorpower fluctuations

• Built-in radio/TV interference filter • ON/OFF AC air gap switch completely

disconnects power to unit for bulb changing orremoval from service

TESTING & CODE COMPLIANCE• UL Listed (File #E-31373• CSA Certified (File #LR-3413)• Backed by a Limited Two-Year Warranty

*COLORCat. No. 6606 available in Brown/Gold (no dash),Ivory/Gold (-I), White/Silver (-W), Almond (-AA), Ivory (-AI), White (-AW), Gray (-AGY) and Black (-AE).For all other True Touch dimmers, basic Cat. No.denotes White device. For other colors, order ColorChange Kits and add suffix as follows: Ivory (-I), White (-W), Almond (-A), Gray (-GY), Black (-E), Whiteframe/Silver touch plate (-WS), Ivory frame/Gold touchplate (-GI), and Brown frame/Gold touch plate (-BG).


True Touch™ Decora Digital Touch Dimmer 120V AC 60Hz OnlyAll True Touch™ dimmers provide single-pole (one location) and 3-way (multi-location) control whenused with True Touch Remote, except Cat. No. 6606.

DESCRIPTION CAT. NO. RATING COLOR CHANGE KIT*

Incandescent Touch Dimmer, Single-Pole Only 6606-W 600W I, W, AA, AI, AW, AGY, AE

True Touch Incandescent TTI06-10W 600W I, W, A, WS, GI, GY, E, BG

True Touch Incandescent TTI10-10W 1000W I, W, A, WS, GI, GY, E, BG

True Touch Magnetic Low-Voltage TTM10-10W 1000VA (750W) I, W, A, WS, GI, GY, E, BG

True Touch Remote Unit (no LED) TT00R-10W No load rating I, W, A, WS, GI, GY, E, BG

True Touch Dimmer Color Change Kit TTKIT — I, W, A, WS, GI, GY, E, BG

True Touch Remote Unit Color Change Kit TTKTR — I, W, A, WS, GI, GY, E, BG


2.62

(66

.6m

m)

2.67

(67

.8m

m)

1.38 (35.1 mm)0.21

(5.3 mm)

0.06 (1.5 mm)

4.13

(10

4.9

mm

)

2.38 (60.5 mm)

1.30 (33.0 mm)

TRUE TOUCH DECORA DIGITAL TOUCH DIMMERCat. No.TTI10-10W

Digital Lighting and Fan Speed Controls are polarity sensitive devices. Always follow the wiring instructionsincluded with each device.They can be used in conventional 3-way and 4-way wiring circuits only when theControl is properly connected to the load as indicated by the device’s wiring instructions.


O24For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building A Connected World

Touch Lighting ControlsTouch Lighting Controls

TGI06-1LW

Residential Grade



SPECIFICATIONS & FEATURES• Provides a unique combination of toggle-style

ON/OFF switching and digital Touch Pad tech-nology

• Designed for smooth ON/OFF toggle actionand fingertip-control touch dimming that’seasy to operate

• Provides single-pole (one-location) and multi-location 3-way control when used with a3-way switch

• Fits perfectly with Leviton standard togglewallplates; gangs perfectly with all Leviton tog-gle switches

• Provides preset dimming with soft-ON feature(does not provide fade OFF)

• Available with Locator LED that is illuminatedwhen lights are OFF

• Protected memory during temporary powerfailures ensures that ToggleTouch will retainlast setting before power interruption


TESTING & CODE COMPLIANCE• UL Listed (File #E-31373) • CSA Certified (File #LR-3413)• Backed by a Limited Two-Year Warranty

*COLORAdd suffix to catalog number as follows for other colors:Brown (-B), Ivory (-I), White (-W), Gray (-G), andAlmond (-A).


ToggleTouch™ Toggle Digital Preset Touch Dimmer 120V 60Hz AC OnlyAll ToggleTouch™ Preset Dimmers provide single-pole (one-location) and 3-way (multi-location) controlwhen used with a 3-way switch, except where noted.

DESCRIPTION CAT. NO. RATING COLOR*ToggleTouch Incandescent TGI06-10 600W W, I, A(No LED locator, single-pole only)

ToggleTouch Incandescent TGI06-1L 600W W, I, A, B

ToggleTouch Incandescent TGI10-1L 1000W W, I, A, G

ToggleTouch Magnetic Low-Voltage TGM10-1L 1000VA W, I, A, G

All items are UL Listed and CSA Certified Note: Leviton does not recommend using the ToggleTouch Dimmer with metal wallplates.

3.28

(88

.3 m

m)

4.13

(10

4.9

mm

)

2.70

(68

.6 m

m)

2.38

(60

.5 m

m)

0.92

(23.

4 m

m)

1.75 (44.5 mm) 1.45 (36.8 mm)

TOGGLETOUCH DIMMER WITHOUT LOCATOR LED Cat. No.TGI06-10W

Digital Lighting and Fan Speed Controls are polarity sensitive devices. Always follow the wiring instructionsincluded with each device.They can be used in conventional 3-way and 4-way wiring circuits only when theControl is properly connected to the load as indicated by the device’s wiring instructions.

3.28

(88

.3 m

m)

4.11

(10

4.4

mm

)

2.70

(68

.6 m

m)

2.38

(60

.5 m

m)

0.92

(23.

4 m

m)

2.38 (60.5 mm) 1.44 (36.6 mm)

TOGGLETOUCH DIMMER WITH LOCATOR LED Cat. No.TGI06-1LW


To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected WorldO25

Traditional Lighting ControlsTraditional Lighting ControlsCommercial Grade

IPI06-1LW in 80301-W



SPECIFICATIONS & FEATURES• Fluid slide movement allows fine adjustment of light

level with minimum effort• Captured, wrap-around slide bar stays in place and

cannot fall off during use• Preset versions provide easy-to-use pushbutton

switch with locator LED conveniently positioned onit, making the pushbutton easier to find in the dark

• Preset versions provide single-pole (one-location)and multi-location lighting control when used with a3-way switch

• Attractive Decora styling blends with any interior• Compatible with Decora screwless and Decora

standard designer wallplates• Locator LED is illuminated when lights are OFF. LED

is positioned in the same location on both Presetand Non-Preset Preset versions, giving a true “familylook” to IllumaTech

• Power failure recovery ensures retention of last setting before power interruption

• Built-in radio/TV interference filter• Quiet 1.5 Amp Fan Speed Controls are ideal for

libraries, study rooms and any area where ceiling fannoise could become distracting. Full range 5-amp fan speed controls also available

• Color change kits feature a self-aligning mechanismthat automatically connects it to internal slider

• Snap-On Color Change Kits allow color changes on any device, eliminating the need to stock a separate device for every available color


*COLORBasic Cat. No. denotes White device. For other colors,order Color Change Kits and add suffix as follows: Ivory(-I), White (-W), Gray (-G), Black (-E), Almond (-A), andBrown (-B).


IllumaTech™ Preset Slide Controls — Single Pole and 3-Way, with LED Locator All IllumaTech Preset Dimmers provide sin-gle-pole (one location) and 3-way (multi-location) control when used with a 3-way switch.

DESCRIPTION CAT. NO. RATING COLOR CHANGE KIT*IllumaTech Incandescent IPI06-1LW 600W I, W, A, G, E, B

120V AC 60 Hz

IllumaTech Incandescent IPI06-10W 600W I, W, A, G, E, B(no LED locator) 120VAC 60 Hz

IllumaTech Incandescent IPI10-1LW 1000W I, W, A, G, E, B120VAC 60 Hz

IllumaTech Electronic Low-Voltage IPE04-1LW 400VA (300W) I, W, A, G, E, B120V AC 60 Hz

IllumaTech Magnetic Low-Voltage IPM06-1LW 600VA (450W) I, W, A, G, E, B 120V AC 60 Hz

IllumaTech Magnetic Low-Voltage IPM10-1LW 1000VA (750W) I, W, A, G, E, B120V AC 60 Hz

IllumaTech Advance Mark VII™ IP710-DLW 1200VA (900W) I, W, A, G, E, BFluorescent Dimming Ballast @ 120V AC 60Hz, 1500VA

(1125W) @ 277V AC 60Hz

IllumaTech Advance Mark X™ IPX06-1LW 600VA (450W) I, W, A, G, E, BFluorescent Dimming Ballast 120V AC 60 Hz

IllumaTech Advance Mark X™ IPX10-1LW 1000VA (750W) I, W, A, G, E, BFluorescent Dimming Ballast 120V AC 60 Hz

IllumaTech Advance Mark X™ IPX06-7LW 600VA (450W) I, W, A, G, E, BFluorescent Dimming Ballast 277V AC 60Hz

IllumaTech Advance Mark X™ IPX12-7LW 1200VA (900W) I, W, A, G, E, BFluorescent Dimming Ballast 277V AC

IllumaTech Quiet Fan Speed Control IPF01-1LW 1.5 Amps I, W, A, G, E, B120V AC 60 Hz

IllumaTech Fan Speed Control IPF05-1LW 5 Amps I, W, A, G, E, B120V AC 60 Hz

IllumaTech Color Change Kit IPKIT-00W — I, W, A, G, E, B

IllumaTech Color Change Kit IPQFK-00W — I, W, A, G, E, Bfor Quiet Fan Speed Control

IllumaTech™ Preset Slide Controls— Single Pole and 3-Way, with LED Locator 220V AC 50Hz Only DESCRIPTION CAT. NO. RATING COLOR CHANGE KIT*IllumaTech Incandescent IPI06-2LW 600W W, I, A, G, E, B

IllumaTech Incandescent IPI10-2LW 1000W W, I, A, G, E, B

IllumaTech Magnetic Low-Voltage IPM06-2LW 600VA (450W) W, I, A, G, E, B

IllumaTech Quiet Fan Speed Control IPF01-2LW 1.5 Amps W, I, A, G, E, B

Note: 220V devices are not UL Listed or CSA Certified

2.68

(68

.1 m

m)

1.41 (35.8 mm)

4.15

(10

5.4

mm

)

3.28

(83

.3 m

m)

2.12 (53.8 mm)0.38 (9.7 mm)

Note: Sharing a neutral wire may cause flickering. Connect all dimmers to the same phase or run a separateneutral to each phase. Consult Leviton Techline if problems persist.



For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World O26


RPI06-1LW in 80301-W

RTD01-10W in 80301-W

IllumaTech™ Rotary Controls 120V AC 60Hz OnlyAll IllumaTech Rotary controls combine the ease of a traditional rotary dial with the contemporary lookof Leviton Decora®.


IllumaTech Rotary Incandescent, Single-Pole RPI06-1L 600W I, W, A and 3-way, Illuminated

IllumaTech Rotary Incandescent, Single-Pole RPI06-10 600W I, W, Aand 3-way, Non-Illuminated

IllumaTech Rotary Quiet Fan Speed Control, RTF01-10 1.5 Amp I, W, A Single-Pole, Non-Illuminated

IllumaTech Rotary Dual Quiet Fan Speed RTD01-10 1.5 Amp Fan Control/ I, W, AControl and Fixture Dimmer, Single-Pole, 300W DimmerNon-Illuminated


SPECIFICATIONS & FEATURES• Combines traditional rotary dial with contempo-

rary Decora styling • Dimmers provide single-pole (one-location) or

multi-location (3-way) control when used with a3-way switch

• Dimmers available in illuminated and non-illu-minated versions

• Quiet 1.5 Amp Fan Speed Controls are perfectfor libraries, study rooms and any area whereceiling fan noise could become distracting

• Dual fan speed control and dimmer is ideal forceiling fans with built-in light fixtures

• Attractive Decora styling coordinates perfectlywith Leviton’s complete line of Decora wiringdevices

• Compatible with Decora Plus screwless andDecora standard designer wallplates

• Built-in radio/TV interference filter• Slim, compact housing fits easily into a stan-

dard wallbox and is suitable for multi-ganginstallations

TESTING & CODE COMPLIANCE• UL Listed (File #E-31373)• CSA Certified (File #LR-3413)• NOM Certified (File #057)• Backed by a Limited Two-Year Warranty

*COLORAdd suffix to catalog number as follows to indicate colorselection: Ivory (-I), White (-W) and Almond (-A).


3.28

(83.

34 m

m)

2.23

(56.

64 m

m)

4.12

(104

.64

mm

)

1.73(44.04 mm)

0.75(19.05 mm)

1.30(33.12 mm)

ILLUMATECH ROTARY INCANDESCENTCat. No. RPI06-1L

OFF

MAX HI MED

LO

3.28

(83.

34 m

m)

2.67

(67.

81 m

m)

4.12

(104

.64

mm

)

1.73(44.04 mm)

0.75(19.05 mm)

1.30(33.12 mm)

ILLUMATECH ROTARY DUAL QUIET FAN SPEED CONTROL/FIXTURE DIMMERCat. No. RTD01-10

Use Leviton Power Extenders to extend the load capacity of box-mounted dimmers. Leviton Power Extendersare available for incandescent, magnetic low-voltage, electronic low-voltage, Advance Mark X™ fluorescentdimming ballasts or equivalents, and 0–10 VDC dimmable fluorescent ballasts such as Advance Mark VII™,OSRAM Sylvania Quicktronic Helios or equivalent ballasts.

See Page O6 for more information on Leviton Power Extenders



INI06-1LW in 80301-W




IllumaTech™ Non-Preset Slide Dimmers — Single-Pole Only, with LED Locator 120V AC 60 Hz OnlyDESCRIPTION CAT. NO. RATING COLOR CHANGE KIT*IllumaTech Incandescent INI06-1LW 600W I, W, A, G, E, B

IllumaTech Incandescent (no LED locator) INI06-10W 600W I, W, A, G, E, B

IllumaTech Incandescent INI10-1LW 1000W I, W, A, G, E, B

IllumaTech Magnetic Low-Voltage INM06-1LW 600VA (450W) I, W, A, G, E, B

IllumaTech Magnetic Low-Voltage INM10-1LW 1000VA (750W) I, W, A, G, E, B

IllumaTech Quiet Fan Speed Control INF01-1LW 1.5 Amps I, W, A, G, E, B

IllumaTech Fan Speed Control INF05-1LW 5 Amps I, W, A, G, E, B

IllumaTech Color Change Kit INKIT-00W — I, W, A, G, E, B

IllumaTech Color Change Kit INQFK-00W — I, W, A, G, E, Bfor Quiet Fan Speed Control


1.11

(28.2 mm)

4.15

(10

5.4

mm

)

2.68

(68

.1 m

m)

3.28

(83

.3 m

m)

2.12 (53.8 mm)

1.26

(32.0 mm)

0.39 (9.9 mm)

ILLUMATECH NON-PRESET SLIDE DIMMERCAT. NO. INI06-1LW

SPECIFICATIONS & FEATURES• Fluid slide movement allows fine adjustment of light

level with minimum effort• Captured, wrap-around slide bar stays in place and

cannot fall off during use• Attractive Decora styling blends with any interior• Compatible with Decora screwless and Decora

standard designer wallplates• Locator LED is illuminated when lights are OFF. LED

is positioned in the same location on both Presetand Non-Preset Preset versions, giving a true “familylook” to IllumaTech

• Power failure recovery ensures retention of last setting before power interruption

• Built-in radio/TV interference filter• Quiet 1.5 Amp Fan Speed Controls are ideal for

libraries, study rooms and any area where ceiling fannoise could become distracting. Full range 5-amp fan speed controls also available

• Color change kits feature a self-aligning mechanismthat automatically connects it to internal slider

• Snap-On Color Change Kits allow color changes on any device, eliminating the need to stock a separate device for every available color


*COLORBasic Cat. No. denotes White device. For other colors,order Color Change Kits and add suffix as follows: Ivory(-I), White (-W), Gray (-G), Black (-E), Almond (-A), andBrown (-B).




Traditional Lighting ControlsTraditional Lighting Controls

6621-PW

6621-W

Residential Grade



1.73 (43.9 mm)

2.63

(66

.8 m

m)

4.13

(10

4.9

mm

)

1.30 (33.0 mm)

1.53 (38.9 mm)

1.34 (34.0 mm)

SURESLIDE PRESET DIMMERCat. No. 6621-P

SureSlide™ Decora Full Range Slide Dimmers 120V 60Hz AC OnlyIncandescentDESCRIPTION CAT. NO. RATING COLOR*

Basic Cat. No. Denotes Brown

SureSlide Single-Pole 6621 600W I, W, GY, A

SureSlide Single-Pole with Preset ON/OFF Switch 6621-P 600W I, W, GY, E, A

SureSlide Single-Pole Illuminated 6631 600W I, W

SureSlide Single-Pole Illuminated, 6631-P 600W I, Wwith Preset ON/OFF Switch

SureSlide 3-Way with Preset ON/OFF Switch 6623-P 600W I, W, GY, E, A

SureSlide 3-Way Illuminated, 6633-P 600W I, Wwith Preset ON/OFF Switch

SureSlide Dual Slide Dimmer—(2) Single-Pole 6628 300W or 300VA I, W, A, GY (No Brown)Loads, Incandescent or Magnetic Low-Voltage per circuit;

600W/600VA Total

Magnetic Low-VoltageSureSlide Single-Pole with Preset ON/OFF Switch 6611-P 600VA (450W) I, W, GY, E, A

SureSlide 3-Way with Preset ON/OFF Switch 6613-P 600VA (450W) I, W, GY, E, A

Advance Mark X / Philips Dimmable Earthlight®

SureSlide Single-Pole 6668-1 500W 120V Mark X I, W (No Brown)350W 120V Philips dimmable Earthlight

Full-Range Fan Speed ControlsSureSlide Single-Pole 6627 5 Amps I, W

SureSlide Single-Pole with Preset ON/OFF 6627-P 5 Amps I, W, A, G, E

SureSlide 3-Way with Preset ON/OFF 6637-P 5 Amps I, W, A, G, E

Quiet Step Fan Speed Controls Brown Not Available

SureSlide Single-Pole Quiet Step 6629-P 1.5 Amps I, W, A, GY

SureSlide 3-way Quiet Step 6629-3 1.5 Amps I, W, A, GY

SureSlide Dual Quiet Fan Speed 6630 1.5A Fan/ I, W, A, GYand Fixture Dimmer 300W Fixture

Trimatron Decora-Style Quiet Fan Speed Control 6639 1.5 Amps I, W, A


SPECIFICATIONS & FEATURES• All SureSlide devices have a permanently

mounted smooth-action integrated linear slidecontrol for easy, precise operation

• SureSlide features a slim, compact housingthat fits easily into a standard wallbox and issuitable for multi-gang installations

• Preset versions provide single-pole (one-location) and multi-location lighting controlwhen used with a 3-way switch

• SureSlide’s attractive Decora styling coordi-nates perfectly with Leviton’s complete line ofDecora wiring devices


• Built-in radio/TV interference filter• Quiet 1.5 Amp Fan Speed Controls are ideal

for libraries, study rooms and any area whereceiling fan noise could become distracting.Full range 5-amp fan speed controls alsoavailable

• SureSlide Cat. No. 6668 is specially designedto work with the Philips Dimmable Earthlight®

• Preset versions provide a low-end trim adjust-ment for precise lamp brightness and fanspeed at the low-end settings


*COLORBasic Cat. No. denotes Brown unless otherwise stated.Add suffix to catalog number as follows for other colors:Ivory (-I), White (-W), Gray (-GY or G), Black (-E), andAlmond (-A).


CAUTION ON RETROFITS: When retrofittingMark X dimming ballasts into fixtures thatoriginally had Instant Start ballasts, the sock-ets MUST be replaced with Rapid Start sock-ets to allow proper dimmer operation andprevent damage to the dimming ballast. Referto the instructions provided with the ballastand the Leviton Mark X dimmer.

For IllumaTech Fan Speed Controls and QuietFan Speed Controls, see pages O25–O27.


6681-W


Traditional Lighting ControlsTraditional Lighting Controls

Trimatron™ Deluxe Push-ON/Push-OFF Full Range Rotary Dimmer 600 Watts 120V 60Hz AC OnlyDESCRIPTION CAT. NO. RATING COLOR*

Trimatron Deluxe Push-ON/Push-OFF Single-Pole 6681 600W I, W, A

Trimatron Deluxe Push-ON/Push-OFF 3-Way 6683 600W I, W

Trimatron Single-Pole Deluxe Rotary 6602 600W I, W

Trimatron Single-Pole Deluxe RotaryH 6602-220 600W-220V I(Not UL Listed or CSA Certified) 50Hz AC

Trimatron Economy Push-ON/Push-OFF, 6600-1 600W IFull-Range Single-Pole

Trimatron Hi-Lo Rotary Single-Pole 6603 300W I(Not UL Listed)H

Trimatron Full-Range Fan Speed Control 6616-X 5 Amps I, W

Decora Plastic Adapter for Rotary Dimmers — 80400 — I, W, EPlastic, Standard size; fits over .406" dimmer shaft

Dimmer Knobs with metal insert 26115 — I, W, E, A(packed 25 per box)

Trimatron™ Decora-Styled Fan Speed Controls DESCRIPTION CAT. NO. RATING COLOR*


Trimatron Quiet Fan Speed Control 6639 1.5 Amps I, W, A

Note: When ganging 2 Trimatron dimmers, limit the load on each to 400W. For ganging 3 or more units, limit the loadon each to 300W.

Note: All dimmers have a ground wire.

All devices are UL Listed and CSA Certified except where indicated byH

1.00(25.4 mm)

2.16

(54.

9 m

m)

1.50

(38.

1 m

m)

4.00

(10

1.6

mm

)

1.59(40.4 mm)

TRIMATRON DELUXE PUSH-ON/PUSH-OFF DIMMERCat. No. 6681-I

SPECIFICATIONS & FEATURES• Leviton Trimatron lighting controls are

traditional rotary-style dimmers featuring anultra-compact design that fits in even the tight-est single-gang wallboxes and is suitable for multi-gang installations

• Built-in radio/TV interference filter• Quiet 1.5 Amp Trimatron Fan Speed Controls

are ideal for libraries, study rooms and anyarea where ceiling fan noise could becomedistracting. Full range 5-amp fan speed controls also available

• Wire leads provided for fast, easy assemblyand wiring


*COLORAdd suffix to catalog numbers as follows to select col-ors: Ivory (-I), White (-W), Almond (-A) and Black (-E).Cat. Nos. 80400 and 26115 also available in Brown (no suffix).


Residential Grade





6641-I

911-A

OFF

.29 (7.3 mm)

1.90 (48.3 mm)

.94

(23.

9 m

m)

3.99

(10

1.4

mm

)

1.75 (44.5 mm)

SINGLE POLE TOGGLE DIMMERCat. No. 6641

Toggle Dimmers 600 WATTS 120VDESCRIPTION CAT. NO. COLOR*


Single Pole Toggle Dimmer 6641 I, W

3-Way Toggle Dimmer 6643 I, W

Single Pole Illuminated Toggle Dimmer 6691 Clear

3-Way Illuminated Toggle Dimmer 6693 Clear

Note: When ganging two units, limit load on each to 400 watts and for three or more units, limit load on each to 300 watts

Decora® 911 Flasher Switch 500 WATTS 120VDESCRIPTION CAT. NO. COLOR*

Basic Cat. No. Denotes Ivory

Decora 3-Position Emergency Flasher Rocker Switch 911 W, A

.21(5.3 mm)

1.44 (36.6 mm)

1.59 (40.5 mm)

2.66

(67.

6 m

m)

.06 (1.6 mm)

2.63

(66

.8 m

m)

2.38 (60.5 mm)

1.30(33.0 mm)

4.13

(10

4.9

mm

)

911 SWITCHCat. No. 911

Incandescent Lighting ControlsIncandescent Lighting Controls

SPECIFICATIONS & FEATURESToggle Dimmers• Easy-to-install shallow design replaces

standard switch in single wallbox• Built-in radio/TV interference filter • Positive ON/OFF action with smooth,

full-range brightness control911 Switch• 911 replaces standard single-pole switch and

alerts neighbors and helps emergency person-nel locate a house quickly

• 911 Switch has standard ON/OFF operationplus a special illuminated “FLASH” positionthat causes controlled lighting to flash ON andOFF at one second intervals


*COLORBasic Cat. No. denotes Brown. Add suffix to catalognumber as follows for other colors: Ivory (-I), White (-W), and Almond (-A).


Residential Grade



Incandescent Lighting ControlsIncandescent Lighting Controls

6250-3

Full Range Compact Dimmer Socket 150 WATTS 120VDESCRIPTION CAT. NO. COLOR1⁄8 I.P.S.Thread and Set Screw 6151 (Non-color item)

1⁄8 I.P.S.Thread and Set Screw — Blister Pak Carded 6151-BP (Non-color item)

Full Range Feed-Through Lamp-Cord Dimmer 200 WATTS 120V ACDESCRIPTION CAT. NO. COLORIndividually BoxedH 6250-3 I

HI-LO Feed-Through Lamp-Cord Dimmer 200 WATTS 120V ACDESCRIPTION CAT. NO. COLORHI-LO Feed-Through Dimmer 1420 I, W

All devices are UL Listed. Also CSA Certified except where indicated byH

1.484 (37.6 mm)

1.312 (33.3 mm)

1.25 (31 7 mm)

.281

(7.1

mm

)2.

375

(60.

3 m

m)

LININGEXTENDS1/16"-1/8"

1.5 (38.1 mm)

BUSHING

SET SCREW

FULL-RANGE COMPACT DIMMER SOCKETCat. No. 6151

SPECIFICATIONS & FEATURES• Compact Dimmer Socket interchangeable

with standard lampholder for dimmer conversion (eliminates need for expensive 3-way bulbs)

• Full-Range Feed-Through Lamp CordDimmer provides full-range dimming with pos-itive ON/OFF action in a completely insulatedplastic housing

TESTING & CODE COMPLIANCE• UL Listed (File #E-3810) – 6151; (File

#E-7458) – 1420; (File #E-7442) – 6250-3• CSA Certified (File #LR-1863) – 6151;

(File #LR-3413) – 1420• Backed by a Limited Two-Year Warranty

*COLORBasic Cat. No. denotes Brown. Add suffix to catalognumber as follows for other colors: Ivory (-I), White (-W).


Residential Grade



Electronic Timer and Time Delay Switches

Electronic Timer and Time Delay Switches

6515M-W

6690-I

2.38 (60.5 mm)

1.30(33.0 mm)

2.63

(66

.8 m

m)

4.13

(10

4.9

mm

)

1.53 (38.9 mm)0.21 (5.3 mm)

.06 (1.5 mm)

THESE DIMENSIONS APPLY TO ALL ELECTRONIC TIMER SWITCHES ON THIS PAGE

Decora Plus Electronic Timer SwitchesLeviton Timers add contemporary styling to any commercial or residential application. Built to the highestperformance standards, Decora Electronic Timers provide long-lasting trouble-free service life.Four Preset buttons plus an OFF button permit timed control of lights and appliances. Decora PlusTimers are ideal for heat lamps, foyer and outdoor lights, hot tubs, spas, attic and exhaust fans. LED’sindicate elapsed time and flash “Two Minutes Until OFF” warning.

Electronic Timer Switches 120V AC 60Hz

DESCRIPTION CAT. NO. INTERVAL COLOR

Four Preset Buttons & OFF 6215M 2-5-10-15 Minutes I, W, A3-Wire, Single-Pole (Neutral Required) 6230M 5-10-15-30 Minutes I, W, A1000W Incandescent, 20A Inductive 6260M 10-20-30-60 Minutes I, W, A1 HP @ 120V 6212H 2-4-8-12 Hours I, W, A

Electronic Timer Switches 120V AC 60Hz


Four Preset Buttons & OFF 6515M 2-5-10-15 Minutes I, W, A2-Wire, Single-Pole 6560M 10-20-30-60 Minutes I, W, A500W Incandescent Only 6512H 2-4-8-12 Hours I, W, A

Time Delay Switch (Incandescent Only) 300 WATT 120V AC

DESCRIPTION CAT. NO. COLOR

Single Pole, Five Minute 6690 I, WDelayed OFF Switch


For more information regarding matchingwallplates, colors, materials, single andmulti-gang, refer to Wallplates, section G.

SPECIFICATIONS & FEATURES • Electronic Timer Switch has four preset

buttons plus OFF for timed control of lightsand appliances.

• Electronic Timer Switch LED’s indicate timeelapsed and last LED flashes two minutesuntil OFF warning

• Press OFF button on Time Delay Switch —lights remain ON for 5 minutes before switch-ing OFF

• All install easily in single gang wallbox inplace of standard switch

• Electronic keypad control • Matching wallplate included

TESTING & CODE COMPLIANCE• UL Listed (File #E-66800—Cat. Nos. 6515M,

6560M, 6512H, 6215M, 6230M, 6260M,6212H; File #E-7458—Cat. No. 6690)

• CSA Certified (File #LR-68679—Cat. Nos. 6515M, 6560M, 6512H, 6215M,6230M, 6260M, 6212H; File #LR-67309—Cat. No. 6690)

• NOM Certified (#057)• Backed by a Limited Two-Year Warranty

*COLORColors available as listed. For color selections, add suf-fix to catalog numbers as follows: Ivory (-I), White (-W),Almond (-A).


Commercial Grade

Commercial Grade

Residential Grade

Residential Grade



6124H-W

6651-W

ProgrammableElectronic Timers

ProgrammableElectronic Timers

24-Hour Programmable Electronic Timer Switch


24-Hour LCD Programmable 6124H 24-Hour ON/OFF scheduling I, W, A Timer Switch 1200W Incandescent, in 30 minute intervals1200VA Inductive @ 120V AC 60HzMotor: 1 HP @ 120V AC 60Hz UL,3⁄4 HP @ 120V AC 60Hz CSANeutral Connection Required Compatible with electronic ballasts

14-Hour Programmable Electronic Timer Switch


14-Hour Segment Programmable 6651 14-Hour ON/OFF scheduling I, W, ATimer Switch 40W min, 500W max. @ in hourly intervals120V AC 60Hz, Incandescent only Neutral Not Required

Variable Countdown Timer Switch


Decora Style Rotary-Dial 6652 1 minute to 18 hours I, W, A Variable Countdown Timer Switch 500W Incandescent,500VA Inductive 1/6 HP @ 120 AC 60HzNeutral Connection Required


PROGRAMMABLE ELECTRONIC TIMER SWITCHCat. No. 6124H

1.53 (38.9 mm)0.21

(5.3 mm) .06 (1.5 mm)

2.38 (60.5 mm)

1.30(33.0 mm)

2.63

(66

.8 m

m)

4.13

(10

4.9

mm

)

121211

5566777

111111

AMAM PMMMMMPPM

Load ToggleON/OFF

PROGRAMMABLE ELECTRONIC TIMER SWITCH VARIABLE

COUNTDOWN TIMERCat. Nos. 6651 and 6652

1.43

(36.3 mm

)

4.13

(104

.9 m

m)

1.73 (43.9 mm)

SPECIFICATIONS & FEATURES 24-Hour Programmable Timer• Ideal for a wide variety of commercial and res-

idential applications including outdoor lighting,pools, motors, sprinklers, exhaust and atticfans, bathroom heat lamps, hot tubs andspas, whole-house exhaust fan scheduling,office lights, janitor closets, landscape andsecurity lighting

• Permits separate ON or OFF scheduling for half-hour periods of the day; ON/OFF man-ual control available by using button belowdisplay panel

• Decora styling enhances any interior (NOTE:6124H cannot be used with Decora PlusScrewless Snap-On Wallplates)

14-Hour Programmable Timer• Ideal for residential incandescent lighting

control including indoor, outdoor and seasonallighting

•”Set-it-and-forget convenience” provides automatic daily control with manual override

• Automates daily switching program (up to 14hours) by responding to DIP switch ON orOFF position for each hour; repeats until func-tion switch is moved to Manual or OFF mode

Countdown Timer Switch• For residential and light commercial applications

including indoor and outdoor lighting, office lightsand ceiling paddle fans

• Simple rotary-dial time selection of settings from 1 minute to 18 hours

• An illuminated LED indicates load is ON. BlinkingLED accompanied by annunciator sound indicatesend of time cycle


*COLORColors available as listed. For color selections, add suf-fix to catalog numbers as follows: Ivory (-I), White (-W),and Almond (-A).


Residential Grade


For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World

LK004

O34

Timed Lighting Control PanelsTimed Lighting Control Panels

SPECIFICATIONS & FEATURES • Ideal for: Cafeterias, auditoriums, gymnasi-

ums and recreational area, pools, parkingfacilities, landscape and security lighting

• Easy keypad programming with self-prompting LCD display

• Switch inputs furnish local override capabilityfor each relay

• Inputs can be configured to accept momen-tary, maintained or toggle switches as well asmotion detection sensors and photocells

• Holiday schedules• Timed inputs• Master override switch: ON/AUTO/OFF• Astronomical clock eliminates the need for

expensive photocells• Optional beeper module allows user to turn

loads On and Off from remote locations without the need for pulling phone lines

• 2-year hardware/software warranty• Limited 10-year warranty on individual relays

TESTING & CODE COMPLIANCE• ETL/ETLC Listed — UL 916 Standards

14.0

0 (3

55.6

mm

)

9.5 (241.3 mm)

5.00

(1

27.0

0 m

m)

Cat. No. LK008

LiteKeeper® and TimeKeeper® Timed Lighting Control Panels —Complete, Stand-Alone Energy Mangement SystemsLiteKeeper® and TimeKeeper® provide complex scheduling of lighting and other loads in commercial andresidential applications where a time clock is typically used in conjunction with switching contactors.These stand-alone units are fully programmable with an on-board keypad.

LiteKeeper® Fully-Assembled Control Panel within a NEMA-1 Lockable EnclosureDESCRIPTION CAT. NO. COLOR*

4 Switch Inputs with 4 Standard LK004-120 Gray20A Output Relays, 120V AC

4 Switch Inputs with 4 Standard LK004-277 Gray20A Output Relays, 277V AC

8 Switch Inputs with 8 Standard LK008-0DV Gray20A Output Relays, 120/277V AC

Enclosure Dimensions:LK004: 9.5" (241.3 mm) H x 14.0" (355.6 mm) W x 3.25" (82.6 mm) DLK008: 14.0" (355.6 mm) H x 9.5" (241.3 mm) W x 5.0" (127.0 mm) D

TimeKeeper® Control Panel within a NEMA-1 Lockable Enclosure,relays shipped separatelyDESCRIPTION CAT. NO. COLOR*

Cabinet with 8 Switch Inputs, accomodates TK000-0DV GraySingle-Phase or Two-Pole Relays

20A Relays, 120/208/240V AC Two-Pole, TPR-208 —1–8 Relays

20A Relays, 277/480V AC Two-pole, TPR-480 —1–4 Relays

20A Relays, 120/277/347V AC SPR-347 —Single-Phase, 1–8 Relays

Enclosure Dimensions:TK000: 14.0" (355.6 mm) H x 9.5" (241.3 mm) W x 7.0" (177.8 mm) D

14.00 (355.6 mm)

9.5

(241

.3 m

m)

3.25 (82.6 mm)

Cat. No. LK004

For more information on Leviton Relay Control Systems, call 1-503-404-5500.

Commercial Grade


O35

Choose GRADE, if appropriate Select RATING and WIRING TESTING & CODE COMPLIANCE

PHOTOGRAPH Check for NEMA CONFIGURATION COLOR LISTING

Check for SINGLE or DUPLEX COLOR ABBREVIATIONS DIMENSIONAL ILLUSTRATIONS

Find AMPERAGE SPECIFICATIONS & FEATURESHD

KGC

JFB

IEA

How To Use This CatalogThis edition of the Leviton Wiring Device Catalog has been re-designed to help you find the device you’re seeking in the quickestand easiest way possible. To achieve this, each Section (A, B, C, etc.) has been divided into three distinct portions in the followingsequence—Industrial Grade first, Commercial Grade second, Residential Grade third—and grouped according to their amperageand voltage, lowest to highest. (Some product classes may have slight differences.) If you need to place an order for any quantity of15 Amp, 125 Volt, Industrial Grade duplex receptacles with back and side wiring, you would begin your search for the right Levitonproduct with the Table of Contents. Here you’ll see that all receptacles are listed in Section D. Turning to Section D, you’ll find thatproduct descriptions now lead off each listing, so that you’ll be able to understand what the device is about, functionally, in relationto your needs. Product description, in turn, is followed by Amps and catalog numbers for ordering purposes. To assist you further,such helpful highlights as Specifications & Features, Testing & Code Compliance, Color listing, Material Characteristics, color photos and dimensional drawings virtually fill each page. Four-color photographs have been added throughout the catalog to provide you with an enhanced view of the Leviton product line.

Any page in this L-504 Catalog can be used as a specificer sheet or as part of a presentation; and any page can be clearly faxed tocustomers and prospects. Product classes may also be pinpointed in the Quick Reference Guide following the Table of Contents.After turning to the proper page, you would locate the catalog number for the item that corresponds to your needs, along with basicinformation about similar items. Wiring diagrams, NEMA Configuration Charts, Electrical Industry Definitions, ANSI ArchitecturalSymbols, and other related information can be found in the Technical Section (U). Specific product catalog numbers are listed in theexhaustive index at the back of the catalog.

Back and Side Wired (Basic Cat. No. Denotes Brown Device*)

DESCRIPTION CAT. NO./COLOR CAT. NO./COLOR CAT. NO./COLOR CAT. NO./COLOR15A/125V 15A/250V 20A/125V 20A/250V

Duplex Receptacle, 5262 5662 5362 5462Brass Strap I, W, GY, R, E I I, W, GY, R, E I, GY

Single Receptacle 5261 5661 5361 5461I, W, GY I I, W, GY, A, E I, A, GY

Narrow Body 5252 — 5352 —Duplex Receptacle I, W (No Brown) I, W (No Brown)

Single Receptacle, 5261-CH — 5361-CH —Clockhanger Stainless Steel Stainless Steel

Straight Blade ReceptaclesStraight Blade Receptacles

5262-I

5-15RG

W 6-15RG

5-20RG

W 6-20RG

Industrial Grade

g pI I, W I

Back and Side Wired Dual Voltage (Basic Cat. No. Denotes Brown Device*)

DESCRIPTION RATING CAT. NO. COLOR

Duplex Receptacle 15A 125V/15A 250V 5292 I


SPECIFICATIONS & FEATURES• Impact-resistant thermoplastic nylon

cover and body• Smooth face does not collect dirt• Four corner latches securely fasten face• Locked-in mounting strap • Large, triple-wipe, brass “T” contacts for

superior contact and conductivity

TESTING & CODE COMPLIANCE• UL Listed 498 (UL File #13399); UL

Federal Specification WC-596• CSA Certified where applicable

(CSA File #LR-406)• NOM Certified (#057)• Backed by a Limited 10-Year Warranty

*COLORBasic Cat. Nos. shown above denote Browndevice. For other color selections, add suffixto the catalog number as follows: Ivory (-I),White (-W), Brown , Almond (-A), Gray (-G or-GY), Black (-E), Red (-R) and Blue (-BU).

MATERIAL CHARACTERISTICSEnvironmental: Flammability, Rated V2

BACK & SIDE WIRED Cat. No. 5252

1.09 (27.7 mm)

0.84 (21.4 mm)

2.78

(70

.6 m

m)

3.27

(83

.1 m

m)

4.06

(10

3.2

mm

)

1.56 (39.6 mm)

1.31 (33.3 mm)

2.38

(60

.3 m

m)

1.06 (27.0 mm)

3.28

(83

.3 m

m)

4.06

(10

3.2

mm

)

SINGLE RECEPTACLECat. No. 5361

D E

A

G

C

H

F

I

J

K

B


lighting and architectural lighting control … · monet ™ scene-capable ... renoir™ preset...

Documents