lighting for security detention - · pdf filelighting for security detention. ... fasteners...

84
MIGHTY MAC LIGHTING FOR SECURITY DETENTION

Upload: tranque

Post on 07-Feb-2018

234 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

MIGHTY MAC™LIGHTING FOR SECURITY DETENTION

Page 2: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

Table of conTenTswHaT'S NEw .............................................................3

LEvELS OF SECURITY ............................................4-5

HOUSING STYLES ..................................................6-7

pRODUCT UNIvERSE .............................................8-9

CELLS ..................................................................10-11

CORRIDORS ........................................................12-13

DaYROOm/CaTwaLk .........................................14-15

waSHROOm .......................................................16-17

CaFETERIa ...............................................................18

RECREaTION aREa .................................................19

SaLLY pORT .............................................................20

bUILDING mOUNTED ..............................................21

SpECIFICaTION paGES ......................................22-82

leTTeR fRoM THe PResIDenT

This product guide has been designed to provide speci-fiers of security detention lighting with the most objective information available for the selection of housing styles, materials, and light levels. by reviewing the introduction and supporting material for each specific security detention application in this guide, you'll benefit from kenall’s more than 20 years of security detention lighting experience.

Over the years, security detention lighting has developed through lighting manufacturers’ responses to specifica-tions from both the federal government and state correc-tional departments. although these unrelated government authorities each developed their own set of specifications, a number of categories and criteria have become acknowl-edged throughout the industry as “best practices” for lighting security detention facilities.

There are currently “best practices” for three areas of security detention lighting: housing style, material selec-tion, and lighting levels. Only lighting levels have been defined in terms of performance while the other areas are defined by features.

The first of these best practice categories is Housing Style. Two basic housing styles are typically used. One is a seam-welded housing with a hinged lens frame; the other is a seam-welded housing with an integral lens hinged to a baseplate. You'll find detailed information on the features and benefits of both styles on pages 6-7.

The second category, Materials and Gauges, pertains to both housings and lenses. a chart showing the materials and gauges recommended for different security levels can be found on page 4.

The final category is Lighting Levels. Recommended levels of illumination for most security detention facility areas are published in the Illuminating Engineering Society (IES) Handbook. The best practice for cell lighting levels in particular, however, has been developed by the american Correctional association. These aCa cell lighting levels are also on page 4 of this product guide.

Once you’ve selected the housing styles, materials and gauges, and light levels appropriate to your security deten-tion applications, you’ll find kenall mighty mac™ or mil-lenium™ products that will easily meet or exceed all your performance needs. In fact, the products presented in this guide are the finest lighting fixtures available anywhere for security detention applications including:• Cells • Cafeterias• Corridors • Recreation areas• Dayrooms/Catwalks • Sally ports• washrooms • building Exteriors

as president of kenall manufacturing, you have my assur-ance that the products presented in this guide have been designed and built to exhibit the very highest levels of design, materials, workmanship, and performance – the “best practices” – in security detention lighting.

Jim Hawkins, president, kenall manufacturing

� 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 3: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

RMc conveRTIble fIxTuRe seRIes (Pgs. 12-13)

kenall’s new grid/flange convertible RmC series is the ideal solution when specifying fixtures for areas where the final ceiling type may be in question. This fixture series is easily con-verted between flange and grid by simply adding or removing a few brackets, thereby saving time and money should the ceiling design change after fixtures are ordered. The convertible fixture is available in flange/grid 1'x4', 2'x2', and 2'x4'.

WHaT's neW In secuRITY DeTenTIon lIgHTIng fIxTuRes

PRc HIgH PeRfoRMance seRIes (Pgs. 14-15)

The new T5HO high performance pRC series combines high lumen output with exceptional efficiency. This 6-lamp, 30,000 lumen fixture is an ideal replacement for 250-watt HID fixtures because it eliminates the long warm up time required by HID luminaires, thereby saving energy by allowing the lighting to be energized only when needed, as well as providing instant-on lighting after power interruptions. The pRC series is also available with a multi-circuit configuration to easily adjust light levels, and a self-contained emergency lighting system.

The pRC series is ideal for cafeterias, dayrooms, gymnasiums and any other applications traditionally illuminated by HID systems.

PRC Series Cross Section

MosT MIgHTY Mac seRIes aRe noW avaIlable WITH T5 anD T5Ho laMPs

Given the strict new energy guidelines adopted in many states, we have incorporated the T5 and T5HO lamp technology in our most popular housing styles. You will now find these energy efficient options in the lamp section on the individual product specification sheets (pages 22-82).

leD nIgHT lIgHTs

Combine energy efficiency with low maintenance costs with kenall's new LED Night Light option (DLN), offered with most mighty mac™ lighting fixtures. The LED circuit board night light allows the facility to field adjust light levels, thereby minimizing vandalism caused by excessive brightness. To check availability, see specification sheets (pages 22-82).

310�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 4: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

levels of secuRITY anD InsTallaTIon DeTaIls

levels of secuRITY

kenall fixtures meet or exceed every security requirement for their intended application. whether a minimum, medium, maximum, or super-maximum application, our fixtures are engineered to resist everything from the most violent abuse to the cleverest attempts at tampering and concealment.

SECURITY LEvELS mINImUm mEDIUm maXImUm SUpER-maXImUm

Housing Gauge – CRS 18 16 14 12

Housing Gauge – SS 20 18 16 14

Lensing – polycarbonate .187" .250" .375" .500"

Lensing – Tempered Glass .250" .375" .500" .750"

Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp

RecoMMenDeD lIgHTIng levels (fooTcanDles)

Our fixtures’ optical systems are specifically engineered to provide Illuminating Engineering Society (IES), american Correctional association (aCa), and Federal bureau of prisons (FbOp)-recommended footcandle levels for their intended applications. because they utilize the most up-to-date lamp and ballast combinations, their energy efficiency matches their lighting performance.

RECOmmENDED LIGHTING LEvELS (FOOTCaNDLES)

appLICaTION IES RECOmmENDED aCa REqUIRED FbOp REqUIRED

Cells N/a 20 FTC* 20 FTC

Corridors 10-20 FTC

Dayrooms 30-50 FTC

Catwalks 10-20 FTC

washroom 20 FTC

Showers 10 FTC

Cafeteria 5-10 FTC

kitchens 50-100 FTC

Recreation area 30 FTC

Sally port 20 FTC

* Grooming and desk area only

4 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 5: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

InternalToolless Fasteners

Optional Removable Gear Tray

Mounting AccessHoles (2)

Wiring AccessHole with Cover

Housingwith Lens

Baseplate

InsTallaTIon anD MaInTenance

Not only are kenall's security detention fixtures tamper-resis-tant and able to withstand the critical environments of security facilities, they are easy to install and maintain. The drawings

below illustrate some of the features designed to ensure simple installation and quick, easy maintenance by authorized personnel.

DoorFrAme HousInG styLe

• Caulkable (e.g., pecora Dynapoxy or Sika Dural)• Full length external hinge for ease of servicing• Cell fixtures feature internal hinges• available with knockouts for surface conduit

InternalToolless Fasteners

Mounting AccessHoles (2)

Wiring AccessHole with Cover

Housing

Door & Lens

CLAmsHeLL HousInG styLe

• Irretrievable bladetrap/contraband drop slot• Embossed mounting holes• Internal hinge (2' or full length)• Recessed fasteners• Housing hinges from either side of baseplate

Optional Removable Gear Tray

�10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 6: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

claMsHell HousIng feaTuRes

• One-piece prime grade material housing.• Corners continuously seam welded and smooth with no post grinding.• TGIC polyester powder coat finish, 5-stage pre-treatment, 1,000-hour salt spray tested, 92% reflectance.

HousIng sTYles – claMsHell

Embossed standoffs allow the most secure fixture installation without fixture distortion.

Fully recessed fasteners resist gripping/prying and prevent unauthorized fixture entry.

vertically adjustable, continuous "Z"- bracket lens retention system is secured to housing withheavy gauge thru-studs - 6" maximum spacing.

Optional removable power tray with quick disconnects and fixture housing design reduces installation and maintenance time.

Reversible, concealed hinging prevents fixture tampering.

Die-formed blade trap (3/8" minimum depth) prevents concealment of weapons and contraband.

Slope-sided design maximizes resistance to physical abuse.

6 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 7: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

vertically adjustable, continuous "Z"- bracket lens retention system is secured to housing withheavy gauge thru-studs - 6" maximum spacing.

Optional removable power tray with quick disconnects and fixture housing design reduces installation and maintenance time.

Completely concealed hinging prevents fixture tampering.

DooRfRaMe HousIng feaTuRes

• One-piece prime grade material housing.• Corners continuously seam welded and smooth with no post grinding.• TGIC polyester powder coat finish, 5-stage pre-treatment, 1,000-hour salt spray tested, 92% reflectance.• kenall recommends using security strength caulking material to reduce risk of contraband storage.

HousIng sTYles – DooRfRaMe

Fully recessed fasteners resist gripping/prying and prevent unauthorized fixture entry.

Slope-sided design maximizes resistance to physical abuse.

710�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 8: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

ceIlIng MounT

SSa/SSb/SSC/SSD Surface/Clamshellpages 11, 13, 15, 23, 27-29

SSaT5 Surface/Clamshell pages 11, 24

SCa/SCb/SCC/SCD Surface/Clamshellpages 30-33

SDa/SDDSurface/Hinged Doorpages 11, 13, 15, 34-35

SDSaSurface/Hinged Doorpage 25

SDSaT5Surface/Hinged Doorpage 26

pSDT5Surface/Hinged Doorpage 36

SCTSurface/Clamshellpage 38

SCHSurface/Clamshellpage 37

RCa/RCb/RCC/RCD Recessed Flange/ Doorframepages 13, 17, 18, 42-45

RGa/RGDRecessed Grid/Clamshellpages 18, 46-47

RmCa/RmCD Recessed Grid/Doorframepages 13, 18, 19, 39-40

pRCT5Recessed Grid/Clamshellpages 15, 18, 19, 41

secuRITY DeTenTIon lIgHTIng PRoDucT unIveRse

Cells Corridors Dayroom Cells Corridors Dayroom Cells Corridors Dayroom Cells Corridors Dayroom Cells Corridors Dayroom

Cells Corridors Dayroom Cells Corridors Dayroom Cells Corridors Dayroom Cells Corridors Dayroom

Washroom Sally Port Dayroom Dayroom

Corridors Cafeteria

Cells

Corridors

Washroom

Cafeteria

Rec Area

Sally Port

N548/N1048Surface/Ceiling or wall mountpages 17, 20, 75-76

SH524-548/SH824-848/SH1248Surface/Ceiling or wall mountpages 20, 77-79

Washroom Sally Port Washroom DayroomDayroom Sally Port

8 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 9: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

wCUSurface/Clamshellpages 11, 48

wCHSurface/Clamshellpage 49

wCbUSurface/Clamshellpage 50

wCbSurface/Clamshellpage 51

wCTSurface/Clamshellpage 52

wCDSurface/Clamshellpage 53

wDUSurface/Hinged Doorpage 54

wDDSurface/Hinged Doorpage 55

wDSSurface/Clamshellpage 56

RFw - Step Light Recessed Flangepage 57

Wall MounT

Cells Washroom Cells Washroom Cells Washroom Cells Washroom Cells Washroom

Cells Washroom Cells Washroom Cells Washroom Cells Washroom Corridor

CCSurface/Clamshellpages 11, 17, 58

CD Surface/Hinged Doorpage 59

mmEX mighty mac Exit Sign wall/Ceiling mountpage 72

mETSw/mETSU/mETDU millenium metrex Exit Signs wall/Ceiling mountpages 73-74

Cells Washroom Cells Washroom

coRneR MounT

SSqaSurface/Clamshellpage 60

SqCaSurface/Clamshellpage 61

SqDa/SqDb/SqDC/SqDD Surface/Hinged Doorpage 15, 19, 62-65

RqCa/RqCb/RqCD Recessed Flange/Grid Clamshellpages 15, 17, 19, 66-68

Rqpa/Rqpb Recessed Flange/ Clamshellpages 69-70

Cells Corridors Rec Area DayroomsCorridors Cafeteria Corridors Cafeteria Rec Area Washroom Rec Area Dayrooms Washroom Rec Area Dayrooms

ceIlIng squaRes

coMPleMenTaRY PRoDucTs

wSp/wpp - wall platesSurface & Concrete pourpage 71

�10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 10: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

cells

because of the highly demanding nature of the application, the cell is the focus of the security detention lighting industry. Cell lighting must be able to withstand extreme physical abuse, clever entry and conceal-ment attempts, and repeated tampering.

levels of secuRITY

because inmates are unsupervised for the majority of their in-cell time, cells represent the toughest possible environ-ment for lighting fixtures. That’s why kenall’s maximum security fixtures incorporate best practices such as fully recessed fasteners and irretrievable blade traps designed to effectively resist unauthorized fixture entry and tampering. In addition, 16,14, or 12-gauge housing construction and a wide selection of impact resistant lensing materials and thickness-es mean they’ll withstand exceptionally high levels of abuse at any security level.

InsTallaTIon anD MaInTenance

Our optional removable gear tray makes kenall cell light-ing fixtures a snap to install and maintain. Using a special, tamper-proof screwdriver, maintenance personnel can easily remove the power tray using the quick-connect plug, and replace the tray with a spare assembly, reducing the amount of time spent in the cell. Necessary repairs can be com-pleted back in the maintenance shop rather than in the cell. with kenall’s effective and efficient housing, removable gear tray and modular design, installation and maintenance time is minimized.

RecoMMenDeD lIgHT levels

kenall’s efficient optical systems provide high levels of uniform lighting that meet or exceed aCa’s required 20 footcandles at the desk and grooming area with a single ceiling-mounted fixture. If preferred, kenall also offers wall and corner mounted fixtures for both overall and localized cell illumination. kenall's optional heavy gauge mechanical and solid state electronic switching devices allow detain-ees to adjust light output to comfortable levels within aCa guidelines.

HousIng sTYles

Two different housing styles are available for cell lighting applications: clamshell and doorframe. In the clamshell version, the housing is attached to a baseplate by an internal hinge that is protected from tampering by an integral blade trap. It is important to note that the clamshell is not designed for use with surface conduit or surface caulking. The doorframe version features a hinged door providing access to the fixture’s interior and is protected against tampering by pickproof caulking material (by others).

Kenall cell fixtures meet or exceed the ACA requirement of 20 footcandles of

illumination for desk and grooming areas.

10 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 11: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

Cell (CC Corner Surface 3 Lamps/F32T8)

11’ x 7’ x 8’ Area 70/70/20 Room Reflectance, .80 LLF (Source: ACA)Catalog No. CC4-0/0-3-32-EB-1-1/B-1

AVG MAX MIN AVG/ MAX/STAT AREA FC FC FC MIN MIN Desk 38 48 28 1.4:1 1.7:1 Grooming 34 67 19 1.7:1 3.5:1 Room 33 49 19 1.7:1 2.6:1

Cell (WCU Wall Surface 1 Lamp Up, 2 Lamps Down/F32T8)

11’ x 7’ x 8’ Area 70/70/20 Room Reflectance, .80 LLF (Source: ACA)Catalog No. WCU4-0/0-1/2-32-EB-1-1/9-1

AVG MAX MIN AVG/ MAX/STAT AREA FC FC FC MIN MIN Desk 44 55 32 1.4:1 1.7:1 Grooming 51 136 20 2.6:1 6.9:1 Room 32 60 18 1.8:1 3.3:1

Cell (SDA Ceiling Surface 3 Lamps/F32T8)

11’ x 7’ x 8’ Area 70/70/20 Room Reflectance, .80 LLF (Source: ACA)Catalog No. SDA4-0/0-3-32-EB-1-1/B-1

AVG MAX MIN AVG/ MAX/STAT AREA FC FC FC MIN MIN Desk 42 54 31 1.4:1 1.8:1 Grooming 44 88 23 1.9:1 3.8:1 Room 45 70 22 2.0:1 3.1:1

PHoToMeTRIcs – TYPIcal cell

Cell (SSAT5 Ceiling Surface 2 Lamps/F54T5HO)

11’ x 7’ x 8’ Area 70/70/20 Room Reflectance, .80 LLF (Source: ACA)Catalog No. SSAT5-0/0-2-54-EB-1-1/B-1

AVG MAX MIN AVG/ MAX/STAT AREA FC FC FC MIN MIN Desk 56 71 43 1.3:1 1.6:1 Grooming 65 113 37 1.7:1 3.0:1 Room 59 87 32 1.9:1 2.8:1

40

40

37

48

49

46

41

57

60

58

52

44

65

73

75

68

56

44

86

93

89

74

57

112

113

99

76

5764

71

5359

65

4853

59

4347

51

32 36 42 48 53 58 60 60 58 53 48 42 37 32

35 40 47 54 61 66 69 69 66 61 54 47 41 35

38 43 50 59 67 73 77 77 73 67 59 51 44 38

39 46 54 63 72 79 83 83 79 72 63 54 47 40

40 47 56 65 75 83 87 87 83 76 66 56 48 41

75 83 87 87 83 76 66 56 48 41

80 83 83 79 72 63 54 47 40

74 77 77 74 67 60 51 44 38

67 70 70 41 36

59 61 61 37 32 24

24

23

29

30

29

25

35

39

38

33

27

41

49

51

46

36

27

60

68

65

52

37

84

88

74

53

43

48

55

39

44

50

35

39

44

31

34

38

23

26

31

36

40

44

46

46

44

40

36

31

26

23

25

29

34

41

47

51

54

54

51

46

41

34

30

26

27

32

38

45

52

58

61

61

58

52

45

38

32

28

29

34

41

49

57

63

67

67

63

57

49

41

35

29

29

35

42

51

59

66

70

70

66

59

51

42

35

30

59

66

70

70

66

59

51

42

35

30

63

67

67

63

57

59

41

34

29

57

61

61

58

52

45

38

32

28

51

54

54

29

25

44

46

46

26

23

24

22

20

32

27

23

20

46

37

29

24

21

63

50

37

29

23

21

68

49

36

28

23

63

45

33

26

36

43

48

35

41

46

32

37

42

28

33

37

19

21

23

24

26

28

29

30

30

29

28

26

25

22

20

22

24

26

28

30

31

32

32

31

30

28

26

24

21

23

25

27

30

32

34

35

35

34

32

30

28

25

22

24

26

29

32

35

37

39

39

38

35

33

30

27

22

24

27

31

34

38

41

42

42

41

38

35

32

28

36

41

44

46

46

44

41

37

33

29

43

47

49

49

47

43

38

33

28

42

47

49

49

47

42

37

32

27

39

43

46

29

25

33

36

39

24

21

48

33

24

72

46

30

23

103

65

40

27

21

136

90

54

35

25

20

115

70

44

29

22

87

54

35

25

51

54

55

46

48

49

39

41

42

32

34

36

18

20

21

22

24

24

25

25

24

23

22

21

19

18

19

21

22

24

25

26

27

27

26

25

23

22

20

19

21

22

24

26

28

29

30

30

29

27

26

23

22

20

22

24

26

29

32

43

35

35

33

31

29

26

24

22

23

26

29

33

36

39

40

40

38

35

32

28

25

23

41

45

47

47

44

40

35

31

27

24

51

53

53

50

45

39

33

29

25

55

58

58

54

48

41

34

29

25

56

60

59

28

25

53

56

56

26

22

RecoMMenDeD cell fIxTuRes

SSaT5CEILING mOUNT SURFaCEpage 24

SDaCEILING mOUNT SURFaCEpage 34

CCCORNER mOUNT SURFaCEpage 58

wCUwaLL mOUNT SURFaCE Up/DOwNpage 48

1110�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 12: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

coRRIDoRs whether your corridor project has a security, suspended, metal pan, or gypsum ceiling, kenall has a convertible fixture design perfectly suited to the ceiling type.

InsTallaTIon anD MaInTenance

because it works with most ceiling types, kenall’s convertible fixture is ideal when a corridor ceiling design has not been determined or is expected to change in the future.

levels of secuRITY

Since corridors are typically supervised, they do not require the use of maximum security fixtures. Designed to accommodate a variety of applications, kenall’s exclusive new convertible recessed fixture can be specified with a 16-gauge steel hous-ing and .187" to .250" lensing.

RecoMMenDeD lIgHT levels

all our recommended corridor fixtures easily produce the 10-20 footcandles recommended by the IES for detention facility corridor applications.

aesTHeTIcs

Due to the reduced security requirements, many minimum security facilities need not appear as "institutional" as other correctional facilities. kenall’s high abuse fixtures may be used to give common areas a more residential feel in those applications.

Kenall’s unique convertible fixture accommodates a variety of corridor ceiling types.

1� 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 13: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

PHoToMeTRIcs – TYPIcal coRRIDoR

Corridor (RMCD Ceiling Recessed 3 Lamps/F32T8)

10’ x 50’ x 9’ Area, 9’ Ceiling Mounting Height80/50/20 Room Reflectance, .80 LLF (Source: IESNA Handbook)Catalog No. RMCD4-FL-0/0-3-32-EB-1-120-1/B-1

AVG MAX MIN AVG/ MAX/STAT AREA FC FC FC MIN MIN Corridor 19 27 13 1.4:1 2.0:1

Corridor (SSC Ceiling Surface 3 Lamps/F32T8)

10’ x 50’ x 9’ Area, 9’ Ceiling Mounting Height80/50/20 Room Reflectance, .80 LLF (Source: IESNA Handbook)Catalog No. SSC4-0/0-3-32-EB-1-1/9-1

AVG MAX MIN AVG/ MAX/STAT AREA FC FC FC MIN MIN Corridor 21 28 16 1.3:1 1.7:1

Corridor (SDA Ceiling Surface 2 Lamps/F54T5HO)

10’ x 50’ x 9’ Area, 9’ Ceiling Mounting Height80/50/20 Room Reflectance, .80 LLF (Source: IESNA Handbook)Catalog No. SDA4-0/0-2-54-EB-1-120-1/B-1

AVG MAX MIN AVG/ MAX/STAT AREA FC FC FC MIN MIN Corridor 21 28 15 1.4:1 1.9:1

1923

2626

2319

1923

2626

2319

1720

2222

2017

1517

1818

1714

1315

1616

1513

1315

1616

1513

1517

1919

1715

1821

2323

2118

2023

2727

2320

2024

2727

2320

1821

2323

2118

1517

1919

1715

1315

1616

1513

2024

2828

2420

2024

27

2724

20

1821

2424

2118

1618

2020

1816

1516

1818

16

15

1517

18

18

17

15

1719

21

2119

17

1922

2525

2219

2125

2828

2521

2125

2828

2521

1922

2525

2219

1719

2121

1917

1517

1818

17

15

22

25

27

27

25

22

22

25

27

27

25

22

20

22

24

24

22

20

19

19

20

20

19

17

16

17

18

18

17

16

16

18

19

19

18

16

16

20

21

21

20

18

21

23

25

25

23

21

23

26

28

28

26

22

23

26

28

28

26

22

21

23

25

25

23

21

16

20

21

21

20

18

16

18

19

19

18

16

RecoMMenDeD coRRIDoR fIxTuRes

SSbCEILING mOUNT SURFaCEpage 27

SDaCEILING mOUNT SURFaCEpage 34

RCaCEILING mOUNT RECESSED FLaNGE/GRID page 42

RmCDCEILING mOUNT RECESSED FLaNGE/GRID page 40

1310�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 14: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

DaYRooM/caTWalk

Combined catwalks and open dayroom areas call for variations in lighting fixtures. Ceiling mounted luminaires of the High abuse category, such as kenall’s millenium Stretch™, often provide sufficient durability for dayroom use while also avoiding the warm-up time problem of HID systems. Security level fixtures are appropriate for use on catwalks and similar locations where fixtures may be accessible to detainees.

RecoMMenDeD lIgHT levels

a wide selection of kenall fixtures meet or exceed the 30-50 footcandles recommended by the IES for dayroom applications, while lighting catwalks to the 10-20 IES-recommended footcan-dle level is easily achieved with any of kenall’s security fixtures. Our security fixtures are also 10% to 15% more efficient than the industry standard – an important consideration in the design of any public facility.

levels of secuRITY

being supervised areas, dayrooms can utilize less severe looking, ceiling-mounted high abuse fixtures. because lighting fixtures for catwalks that overlook dayrooms are more acces-sible, security category fixtures are recommended.

InsTallaTIon anD MaInTenance

both our high abuse and security fixtures are designed for easy installation and maintenance. Our security clamshell housing style fixtures, for example, feature housings keyed on both sides. Since the baseplate can be installed first, there’s no need to support the entire fixture weight during installation. mainte-nance is particularly easy when you specify kenall's innovative removable gear tray that comes complete with electrical quick connects. In the high abuse category, millenium Stretch’s Ip64 rating ensures the fixture is sealed against moisture and dust, eliminating maintenance headaches for years to come. because it works with most ceiling types, our recessed convertible fixture is ideal when a dayroom or catwalk ceiling type has not been determined, or is expected to change in the future.

aesTHeTIcs

with its sleek, extruded aluminum linear housing, optical quality lens, and choice of colored joiner pieces, millenium Stretch helps de-institutionalize the look of most dayrooms. and while no fixture appropriate for use in catwalk areas is designed with aesthetics as a high priority, the expertly designed mounting details, powder-coated finish, and lack of visible hardware of kenall security fixtures make them clean-looking and unobtrusive.

...while high abuse lighting, such as our Millenium Stretch™, can often be used to

de-institutionalize the look of dayrooms.

Recessed security fixtures are an appropriate choice for catwalk lighting...

14 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 15: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

PHoToMeTRIcs – TYPIcal DaYRooM

Dayroom (PRCT5 Ceiling Recessed 6 Lamps/F54T5HO; SSA Ceiling Surface 2 Lamps/F32T8)

80’ x 50’ x 20’ Type Area 80/50/20 Room Reflectance, .80 LLF (Source: IESNA Handbook)Catalog Nos. PRCT5-0/0-6-54-PB-2-1/B-1, SSA4-0/0-2-32-EB-1-1/B-1

AVG MAX MIN AVG/ MAX/STAT AREA FC FC FC MIN MIN Dayroom 52 61 43 1.2:1 1.4:1 Catwalk 14 22 10 1.3:1 2.1:1

Dayroom (MLHA1248 Ceiling Surface 4 Lamps/F54T5HO; SSA Ceiling Surface 2 Lamps/F32T8)

80’ x 50’ x 20’ Type Area 80/50/20 Room Reflectance, .80 LLF (Source: IESNA Handbook)Catalog Nos. MLHA12-48-F-MW-CP-4-54-PB-2, SSA4-0/0-2-32-EB-1/B-1

AVG MAX MIN AVG/ MAX/STAT AREA FC FC FC MIN MIN Dayroom 47 50 37 1.3:1 1.4:1 Catwalk 13 19 10 1.3:1 2.0:1

Dayroom (RQCD Ceiling Squares Recessed 1 Lamp/400 Watt MH; SDA Ceiling Surface 2 Lamps/F32T8)

80’ x 50’ x 20’ Type Area 80/50/20 Room Reflectance, .72 LLF (Source: IESNA Handbook)Catalog Nos. RQCD-1/1-1-400M-DT-A/1-1, SDA4-0/0-2-32-EB-1/B-1

AVG MAX MIN AVG/ MAX/STAT AREA FC FC FC MIN MIN Dayroom 48 54 33 1.5:1 1.6:1 Catwalk 11 16 8 1.3:1 1.9:1

Dayroom (SQDC Ceiling Squares Surface 1 Lamp/150 Induction; SSA Ceiling Surface 2 Lamps/F32T8)

80’ x 50’ x 20’ Type Area 80/50/20 Room Reflectance, .80 LLF (Source: IESNA Handbook)Catalog Nos. SQDC-0/0-1-150IND-EB-1-120-1/C-1, SSA4-0/0-2-32-EB-1/B-1

AVG MAX MIN AVG/ MAX/STAT AREA FC FC FC MIN MIN Dayroom 40 43 33 1.2:1 1.3:1 Catwalk 10 14 8 1.4:1 1.9:1

37

45

44

46

48

46

47

48

45

47

49

45

47

48

45

47

47

44

45

40

39

48

48

48

50

48

49

49

48

49

50

48

48

50

48

49

50

48

48

42

40

47

48

48

48

47

47

47

47

47

48

47

47

48

47

48

48

48

48

41

39

47

48

48

47

47

47

46

47

47

47

47

46

47

47

47

48

48

47

39

40

48

49

48

48

48

47

47

47

47

47

47

47

47

48

48

48

49

48

41

41

50

50

50

49

49

49

48

48

49

49

48

48

49

49

49

50

50

50

41

41

50

50

50

49

49

49

48

48

48

48

48

48

49

49

49

50

50

50

42

41

50

50

50

49

49

49

48

48

49

49

48

48

49

49

49

50

50

50

41

40

48

49

48

48

48

48

47

47

47

47

47

47

48

48

48

48

49

48

41

39

48

48

48

47

48

47

47

47

47

47

47

47

47

48

47

48

48

48

40

40

48

48

48

48

48

48

48

47

48

48

47

47

48

48

48

48

48

48

41

40

48

48

49

50

49

49

50

48

49

50

48

49

50

48

49

50

48

48

42

37

44

44

46

48

46

47

48

46

47

49

45

47

48

45

47

47

44

45

40

45 52 51 53 53 51 54 55 51 53 51 55 54 51 53 53 51 53 46

48 56 55 55 54 54 55 55 53 54 53 55 55 54 55 55 55 57 48

43 52 50 49 48 48 49 49 47 47 47 49 49 48 48 49 51 53 44

45 54 53 51 49 50 51 51 50 48 50 51 51 51 50 52 54 55 46

51 59 59 57 55 56 57 57 56 54 56 57 57 57 55 57 60 60 51

49 58 57 55 53 55 55 55 54 52 54 55 55 49

54 56 58 59 50

45 54 53 51 49 49 50 50 49 47 49 50 50 49

49 51 54 55 46

49 58 57 55 53 55 55 55 54 52 54 55 56 49

54 56 59 59 50

50 59 59 57 55 56 57 57 56 54 56 57 57 48

55 57 60 60 51

45 54 53 51 50 51 51 51 50 48 50 51 52 48

50 52 54 55 46

43 52 51 49 48 48 49 49 47 47 47 49 49 48

48 50 51 53 44

48 57 55 55 55 54 56 56 53 54 54 56 56 48 55 55 56 57 49

45 52 51 52 53 51 54 54 51 53 51 54 54 45

53 53 51 52 45

5354

4748

5452

4752

5448

4754

53

33 38 37 40 40 38 40 40 38 40 40 38 40 40 38 40 40 37 38 33

35 41 41 42 43 41 42 42 41 42 42 41 42 42 41 43 42 41 41 35

34 40 40 41 41 40 40 40 40 40 40 40 40 40 40 41 40 40 40 34

34 40 40 40 40 40 40 39 40 40 40 39 39 40 40 40 40 40 39 33

35 41 41 41 41 41 41 40 40 40 40 40 40 41 41 41 41 41 40 35

35 42 43 42 42 42 42 41 41 42 42 41 41 42 42 42 42 42 41 35

36 42 43 43 42 42 42 41 41 42 42 41 41 42 42 42 42 42 41 36

35 42 43 42 42 42 42 41 41 42 42 41 41 42 42 42 42 42 41 35

35 41 41 41 41 41 41 40 40 41 41 40 40 41 41 41 41 41 40 35

34 40 41 41 40 40 40 40 40 40 40 40 40 40 40 40 40 40 39 34

35 41 41 41 41 41 41 41 40 41 41 40 41 41 41 41 41 40 40 35

35 42 41 43 43 41 43 43 41 43 43 41 43 43 41 43 42 41 41 35

33 38 37 40 40 38 40 40 38 41 41 38 40 40 38 40 40 37 38 33

34

41

42

44

46

44

46

48

45

47

48

45

47

47

44

45

45

41

41

36

37

45

47

49

50

49

51

52

50

52

52

50

51

51

49

50

50

47

45

39

37

45

48

49

50

50

51

52

51

51

51

51

52

51

50

50

50

47

44

38

37

45

48

50

50

51

52

52

52

52

52

52

52

52

51

50

50

48

44

37

38

45

49

51

51

52

53

53

53

53

53

53

53

53

52

51

51

48

45

38

38

46

50

52

52

53

54

54

54

54

54

54

54

54

53

52

51

49

45

38

39

46

50

52

52

53

53

54

54

53

53

54

54

53

52

52

51

49

45

38

38

46

50

52

52

53

54

54

54

54

54

54

54

54

53

52

51

49

45

38

38

45

49

51

51

52

53

53

53

53

53

53

53

53

52

51

51

48

45

38

37

45

48

50

50

51

52

52

52

52

52

52

52

52

51

50

50

48

44

37

37

45

48

49

50

50

51

52

51

51

52

51

52

51

50

50

50

47

45

38

37

45

47

49

50

49

51

52

50

51

52

50

51

51

49

50

50

46

45

39

33

40

41

44

46

44

46

47

45

46

47

45

46

47

44

45

45

41

40

36

RecoMMenDeD DaYRooM fIxTuRes

SqDCCEILING mOUNT SURFaCE HID/INDUCTION page 64

SSaCEILING mOUNT SURFaCEpage 23

mLHa1248CEILING mOUNT SURFaCEmILLENIUm STRETCH™

pRCT5CEILING mOUNT RECESSED T5, T5HO LampS page 41

1�10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 16: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

WasHRooM

kenall meets challenging washroom lighting requirements with fixtures that are safe, secure, and impervious to the rust and corrosion typically caused by washroom moisture.

InsTallaTIon anD MaInTenance

Due to the regular exposure of washroom lighting to moisture, maintenance can be an ongoing and expensive issue if fixtures aren’t properly designed for use in wet environments. Speci-fied as “wet Location Listed,” kenall’s stainless steel security fixtures are resistant to the rust and corrosion that results in excessive maintenance and replacement.

levels of secuRITY

Since light fixtures may be accessible to detainees in unsuper-vised washrooms, security level fixtures are recommended. kenall offers medium and maximum security ceiling and corner mounted security-classification fixtures, both of which deliver unsurpassed quality and durability for washroom applications.

RecoMMenDeD lIgHT levels

The IES recommends 10 footcandles for shower areas and 20 footcandles at the mirrors – levels easily achieved with kenall’s washroom-recommended fixtures. Corner mount fixtures are typically used over mirrors at sink locations while ceiling-mounted fixtures are typically applied in shower areas.

HousIng sTYles

most security detention washroom fixtures use the doorframe housing style. The doorframe version provides access to the fixture’s interior by means of a hinged door and is protected against tampering by pickproof caulking material (by others). The doorframe style is also available with a wet Location listing.

aesTHeTIcs

with their stainless steel construction and powder coat finishes, kenall’s recommended washroom fixtures won’t suffer from the moisture-related problems that make most security detention fixtures look old and need replacement before their time.

Wet Location Listed (WL option) Kenall security fixtures resist the rust

and corrosion-causing conditions present in institutional washrooms.

16 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 17: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

PHoToMeTRIcs – TYPIcal WasHRooMWashroom (RQCA Ceiling Squares Recessed 1 Lamp/42 Watt PLT; CC Corner Surface 2 Lamp/F32T8)

20’ x 15’ x 9’ Area 80/50/20 Room Reflectance, .80 LLF (Source: IESNA Handbook)Catalog Nos. RQCA-0/0-1-42P-EB-1-1/B-1, CC-0/0-2-32-EB-1-1/B-1

AVG MAX MIN AVG/ MAX/STAT AREA FC FC FC MIN MIN Entry 22 24 21 1.1:1 1.2:1 Sink 42 51 31 1.4:1 1.7:1 Shower & General Area 42 65 19 2.2:1 3.4:1

Washroom (N1048 Ceiling Surface 2 Lamps/F32T8, N548 Ceiling Surface 1 Lamp/F32T8)

20’ x 15’ x 9’ Area 80/50/20 Room Reflectance, .80 LLF (Source: IESNA Handbook)Catalog Nos. N1048-C-2-32-EB/1-120, N548-C-1-32-EB-1-1R

AVG MAX MIN AVG/ MAX/STAT AREA FC FC FC MIN MIN Entry 20 22 18 1.1:1 1.2:1 Sink 33 41 25 1.3:1 1.6:1 Shower & General Area 32 51 14 2.3:1 3.7:1

RecoMMenDeD WasHRooM fIxTuRes

RCaCEILING mOUNTRECESSED FLaNGE page 42

CCCORNER mOUNT SURFaCEpage 58

N1048CEILING mOUNT SURFaCENOva™ page 76

2131

3537

3540

42

3843

45

4146

49

4248

50

4248

51

4146

50

3944

47

3540

43

3135

37

2223

2221

2224

2423

22

2224

2423

22

2123

2323

21

3031

3541

4243

4655

5647

4645

4736

3938

37

3542

4949

5555

4746

4647

32

4043

4650

5453

5146

4747

3735

3636

4345

4747

5151

5048

4648

3941

4140

4346

4646

4748

4948

4746

32

4244

4444

4444

45

42

42

43

42

4240

42

41

40

38

36

32

39

38

37

35

33

29

36

36

34

32

30

28

3031

30

2827

25

4545

4331

2522

19

3536

3739

3940

4054

5546

4543

4634

3433

32

3737

3940

4040

4053

5545

4542

4533

3839

4041

4241

4154

5444

4442

4434

3940

40

3839

4142

4342

4154

5443

4241

4331

3233

32

3840

4243

4343

4253

5442

4241

4327

3840

4143

4343

4252

5342

4241

4336

3942

42

3940

4243

4444

4352

5342

4242

4536

3637

37

3942

4546

4747

4654

5443

4343

4735

4553

5657

5756

5765

6348

4748

5243

4549

44

1825

2729

2830

32

3033

35

3336

38

3437

40

3438

41

3337

40

3134

37

2831

33

2528

29

2021

2018

1921

22

2119

1921

2221

19

1820

2120

18

1619

2125

2729

2933

3340

3637

3732

3225

24

2830

3232

3434

3936

3636

29

2932

3434

3537

3936

3636

3124

2322

3133

3635

3639

3937

3636

3030

2423

3235

3737

3839

3938

3635

26

3235

3737

3838

37

3335

3737

3836

3334

3535

3532

3133

3433

3230

2931

3131

3028

2526

2726

2624

3734

3225

1815

14

1919

2122

2627

2732

3339

3737

3832

2322

20

2121

2224

2627

2732

3239

3738

3933

2323

2426

2727

2732

3241

3638

4034

3431

30

2424

2527

2827

2732

3242

3638

4033

2724

22

2424

2627

2828

2731

3242

3738

4033

2324

2626

2727

2731

3141

3738

4035

3528

27

2324

2626

2727

2731

3241

3839

4035

3127

26

2325

2728

2828

2831

3342

4041

4236

2731

3334

3534

3437

4351

4748

4943

3529

28

N548CEILING mOUNT SURFaCENOva™ page 75

1710�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 18: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

2935

4246

4541

3838

4247

4947

4239

3942

4647

4336

3444

5561

5851

4545

5159

6359

5146

4551

5962

5745

3650

6370

6656

4848

5668

7368

5648

4856

6772

6651

3040

5156

5245

3939

4554

5854

4539

3945

5457

5342

3750

6471

6656

4848

5768

7368

5748

4856

6872

6652

3545

5561

5851

4646

5260

6460

5246

4652

5962

5747

3036

4245

4441

3939

4246

4846

4239

3942

4546

4337

2428

3134

3433

3232

3335

3635

3432

3233

3434

3229

2022

2426

2626

2626

2728

2828

2727

2627

2726

2523

2022

2426

2626

2626

2728

2828

2727

2627

2726

2523

2528

3234

3433

3232

3436

3636

3432

3233

3534

3330

3036

4246

4541

3939

4247

4846

4239

3942

4646

4337

3645

5661

5952

4646

5260

6460

5347

4752

6062

5847

3751

6471

6756

4849

5768

7468

5749

4957

6872

6652

3141

5157

5345

3940

4655

5954

4640

4046

5458

5443

3750

6471

6756

4949

5769

7469

5749

4957

6873

6752

3645

5661

5952

4647

5360

6460

5347

4752

6062

5847

3036

4245

4541

3939

4246

4846

4239

3942

4546

4337

2528

3234

3435

3232

3436

3736

3433

3333

3535

3329

2123

2526

2727

2627

2728

2828

2727

2727

2726

2523

2123

2526

2727

2627

2728

2928

2727

2727

2727

2523

2528

3234

3433

3232

3436

3736

3433

3334

3535

3329

3036

4246

4541

3939

4247

4847

4339

3942

4646

4337

3646

5661

5952

4647

5361

6460

5347

4752

6063

5847

3851

6471

6757

4949

5769

7469

5749

4957

6872

6753

3141

5157

5345

3940

4655

5954

4640

4046

5458

5443

3750

6471

6756

4849

5768

7468

5749

4957

6873

6752

3645

5661

5952

4647

5260

6460

5347

4752

5962

5847

3036

4245

4541

3939

4246

4846

4239

3942

4546

4337

2528

3234

3433

3232

3436

3736

3432

3233

3535

3330

2022

2426

2626

2626

2728

2828

2727

2627

2726

2523

2022

2526

2626

2626

2728

2828

2727

2627

2726

2523

2428

3134

3433

3232

3435

3635

3432

3233

3434

3229

3036

4245

4541

3939

4246

4846

4239

3942

4546

4337

3545

5561

5851

4646

5260

6460

5246

4652

5962

5747

3750

6471

6656

4848

5768

7368

5749

4957

6872

6652

3040

5156

5245

3939

4554

5854

4539

3945

5457

5342

3650

6371

6656

4848

5668

7368

5648

4856

6772

6651

3444

5561

5851

4545

5159

6359

5246

4651

5962

5746

2935

4246

4541

3839

4246

4947

4239

3942

4647

4336

cafeTeRIa

Only kenall offers maximum security detention lighting fixtures listed with the National Sanitation Foundation (NSF). Designed for use in food preparation, serving, and dining areas, NSF-listed security deten-tion lighting meets the toughest safety standards while providing the security necessary for cafeteria use.

levels of secuRITY

kenall's National Sanitation Foundation listing assures that security detention lighting fixtures specified with this option are toxic-free, corrosion resistant, and easy to clean.

RecoMMenDeD lIgHTIng levels

The IES recommends a minimum of 5-10 foot-candles average illumination for institutional eating areas and 50-100 footcandles for institutional kitchens. kenall’s ceiling mounted maximum secu-rity fixtures can easily meet these recommended levels. kenall security fixtures are also 10% to 15% more efficient than the industry standard – an important consideration in the design of any public facility.

InsTallaTIon anD MaInTenance

kenall’s optional Removable Gear Tray means that any servicing of our maximum security fixtures can be performed in just a matter of minutes. Specifying the NSF Splash Non-Food Zone (SN) option ensures unmatched ease of cleanability.

HousIng sTYles

a typical cafeteria uses the doorframe housing style. The doorframe version features a hinged door providing access to the fixture’s interior and is protected against tampering by pickproof caulk-ing material (by others).

RecoMMenDeD cafeTeRIa fIxTuRes

RCaCEILING mOUNT RECESSED FLaNGE page 42

RGDCEILING mOUNT RECESSED FLaNGE page 47

RmCDCEILING mOUNT RECESSED FLaNGE/GRID page 40

PHoToMeTRIcs – TYPIcal cafeTeRIa

Cafeteria (PRCT5 Ceiling Recessed 4 Lamps/F54T5HO)

80’ x 40’ x 10’ Area 80/50/20 Room Reflectance, .80 LLF (Source: IESNA Handbook)Catalog No. PRCT5-0/0-4-54-PB-2-1/B-1

AVG MAX MIN AVG/ MAX/STAT AREA FC FC FC MIN MIN Cafeteria 44 74 20 2.2:1 3.6:1

When specified with the NSF-listed option (SN), our security fixtures provide unmatched safety and

security for cafeterias and food preparation areas.

pRCT5CEILING mOUNT RECESSED T5, T5HO LampS page 41

18 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 19: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

2123252627282929292929292929282726252321

2225262829303131313131313131302928262422

2426283031323233333333333332323130282624

2527293132333434343434343434333231292725

2628303233343535353535353535343332302826

2629313334353636363636363636353433312926

2730323335363737373737373736363433312927

2830323435363737383838383737363534322927

2830323436373838383838383837373534323028

2931333536373838383838383838373634333028

2831333536373838393939393838373635333128

2931333536373839393939393938373635333128

2931333536373839393939393938373635333129

2931333536383839393939393938373635333129

2931333536383939393939393938383635333129

2931333536383939393939393938383635333129

2931333536383839393939393938383635333129

2931333536383839393939393938373635333129

2931333536373839393939393938373635333129

2831333536373838393939393838373635333129

2931333536373838383939383838373634333129

2830323436373838383838383838373534323028

2830323435363738383838383837363534323028

2730323335363737373737373737363533312927

2629313334353636363636363636353433312926

2628303233343535353535353535343332302826

2527293132333434343434343434333231292725

2326282931323233333333333332313129282623

2224262829303131313131313130302928262422

2123242627282829292929292928282726242321

RecReaTIon aRea

kenall makes fixtures for indoor recreation areas of all ceiling heights. For high ceiling applications where fixture accessibility is not an issue, our high abuse fixtures present an economical, durable, and attractive lighting solution. In lower ceiling facilities where fixtures are accessible to detainees, our security detention fixtures provide appropriate illumi-nation without fear of tampering or breakage.

levels of secuRITY

High abuse lighting can be used effectively in high ceiling applications, while security-rated fixtures are necessary for low ceiling areas where lighting may be accessible to detainees. In both cases, kenall offers fixtures that do the job effectively, economically, and in the case of our high abuse millenium™ fixtures, attractively.

RecoMMenDeD lIgHTIng levels

with a variety of lamp and ballast options to choose from, meeting the IES recommendation for 30 foot-candles in recreation area applications won’t present a problem when you specify kenall – whether your appli-cation calls for high abuse or security-type luminaires.

InsTallaTIon anD MaInTenance

kenall's fixtures are easy to install and require little maintenance. both high abuse millenium and secu-rity-grade fixtures are designed for fast, trouble-free installation, with high quality housings, impact-resistant lenses and long-life lamps and ballasts that ensure minimal maintenance requirements – especially impor-tant considerations in high-ceiling applications where fixture inaccessibility can otherwise be a problem.

HousIng sTYles

Our ceiling-mounted security fixtures are available in clamshell and doorframe housing configurations. High abuse fixtures come in a variety of housing shapes and sizes.

PHoToMeTRIcs – TYPIcal RecReaTIon aRea

Recreation (RQCD Ceiling Squares Recessed 1 Lamp/320 Watt MH)

40’ x 60’ x 20’ Area 80/50/20 Room Reflectance, .72 LLF (Source: IESNA Handbook)Catalog No. RQCD-1/1-1-320M-MH-A/1-1

AVG MAX MIN AVG/ MAX/STAT AREA FC FC FC MIN MIN Recreation 33 39 21 1.6:1 1.9:1

RecoMMenDeD RecReaTIon aRea fIxTuRes

SqDCCEILING mOUNT SURFaCE page 64

RmCDCEILING mOUNT RECESSED T8 LampS page 40

pRCT5CEILING mOUNT RECESSED T5, T5HO LampS page 41

mLHa1248CEILING mOUNT SURFaCEmILLENIUm STRETCH™

Even though detention facility recreation areas are typically well supervised, lighting fixtures must be able to withstand the abuse typical of normal gym activities.

1�10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 20: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

1618

2021

2121

2121

2121

2121

2018

16

1719

2223

2423

2323

2323

2423

2219

17

1821

2325

2525

2524

2525

2525

2321

18

1922

2426

2626

2626

2526

2626

2422

19

1922

2526

2727

2626

2627

2727

2522

19

2023

2527

2827

2726

2727

2827

2523

20

2023

2628

2828

2727

2728

2828

2623

20

2023

2628

2828

2727

2728

2828

2623

20

2023

2527

2827

2726

2727

2827

2523

20

2023

2527

2827

2726

2727

2827

2523

2019

2225

2627

2726

2626

2727

2725

2219

1922

2426

2626

2625

2626

2626

2422

1918

2123

2525

2525

2425

2525

2523

2118

1719

2223

2423

2323

2323

2423

2219

1716

1820

2121

2121

2121

2121

2120

1816

sallY PoRT

proper lighting is key to ensuring effective staff performance of important processing-area duties. being secured and supervised areas, sally ports are excellent applications for kenall’s high-performance, high abuse fixtures.

levels of secuRITY

Institutional high abuse fixtures are perfectly suited to secured and staffed areas such as sally ports and other detention facility processing areas.

RecoMMenDeD lIgHTIng levels

The IES recommendation for a minimum of five footcandles is easily surpassed with kenall’s wall or ceiling-mounted fixtures.

InsTallaTIon anD MaInTenance

kenall high abuse lighting is designed for fast installation, while routine maintenance couldn’t be easier. In the highly unlikely event of a fixture problem, our entire high abuse family of luminaires is covered by kenall’s exclusive peace of mind Lifetime Guarantee™.

HousIng sTYles

kenall’s institutional high abuse fixtures are wet Location listed and our architectural high abuse lighting fixtures are both wet Location listed and Ip64 rated.

aesTHeTIcs

by using only the best housing materials powder coated with high quality polyurethane, kenall fixtures keep their as-new appearance for years – even with minimum maintenance.

RecoMMenDeD sallY PoRT fIxTuRes

Kenall's institutional fixtures deliver the high lighting quality appropriate for secured processing areas.

PHoToMeTRIcs – TYPIcal sallY PoRT

Sally Port (N1048 Ceiling Surface 4 Lamps/F32T8)

30’ x 30’ x 15’ Area 80/50/20 Room Reflectance, .80 LLF (Source: IESNA Handbook)Catalog No. N1048-C-4-32-EB-1

AVG MAX MIN AVG/ MAX/STAT AREA FC FC FC MIN MIN Sally Port 24 28 16 1.5:1 1.8:1

N1048CEILING mOUNT SURFaCE NOva™ page 76

SH848CEILING mOUNT SURFaCE SHERIFF™ page 78

mLHa1248CEILING mOUNT SURFaCEmILLENIUm STRETCH™

�0 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 21: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

buIlDIng MounTeD

Correctional facilities need to blend in with – and even complement – local architectural environments. That’s why kenall’s uniquely attractive and durable millenium™ fixtures are the perfect choice for exterior wall applications.

aesTHeTIcs

Correctional facilities are often located in urban areas that require aesthetic sensitivity. Exterior lighting fixtures must blend in with and complement the surrounding architectural design, while eliminating nuisance issues such as light trespass and glare. kenall offers a complete line of architecturally pleasing luminaires that are guaranteed against breakage for the lifetime of the installation.

levels of secuRITY

In order to work effectively night after night, building-mounted fixtures need to successfully resist physical abuse and harsh environmental conditions. kenall’s millenium™ high abuse fixtures are unsurpassed in their ability to withstand both.

RecoMMenDeD lIgHT levels

with their advanced optical systems, millenium fixtures can easily meet exterior illumination requirements – even in widely-spaced layouts – without creating the unattractive, uncomfortable glare all too common in high abuse fixtures.

InsTallaTIon anD MaInTenance

all kenall architectural high abuse fixtures are designed for easy installation. and when it comes to ease of maintenance, no other fixtures even come close. millenium’s UL Ip64 rating means dirt, bugs, moisture, and environmental debris can’t get in. millenium’s corrosion resistant construction – diecast marine-grade aluminum baseplates and stainless steel hardware – are the finest components you’ll find anywhere.

RecoMMenDeD buIlDIng MounTeD fIxTuRes

Millenium™ adds architectural style and flair to any building exterior, while being tough enough to take the worst abuse people and nature can dish out.

waLL mOUNT SURFaCE mILLENIUm HIGH abUSE™

waLL mOUNT SURFaCE mILLENIUm FREESCaLE™

FULL CUTOFF/waLL mOUNT SURFaCE mILLENIUm FINITE™

4 4

3 4

2

8 5

3 3

2

5 5

4 3

2

8 6

4 4

3

6 5

5 5

4

6 7

5 6

4

7 7

5 6

4

6 6

5 5

4

9 7

5 4

4

6 6

5 4

3

9 7

5 5

4

6 6

6 6

4

7 8

7 7

5

8 8

8 8

5

8 8

9 8

6

11

10

9 8

6

9 9

9 8

7

11

9 8

9 9

6

11

12

3 4

4 5

6 8

11

3 3

4 5

7 8

3 3

4 5

6

3 3

4 5

3 3

4 3

4 3

8 12

9

7 6

6 5

5 4

4 3

4 4

4 3

3 3

2 2

3

11

9 8

7 8

8 7

6 5

4 4

5 6

6 5

4 3

3 4

8 9

8 9

8 7

6 5

5 5

5 5

5 5

4 4

3 4

9 9

10

8 8

8 6

7 6

6 6

6 6

6 6

5 4

4

4 11

9

11

8 8

7 6

9 6

9 6

6 6

6 8

5 7

4

PHoToMeTRIcs – TYPIcal buIlDIng exTeRIoRBuilding Mounted (MR17WP Wall Surface 1 Lamp/150 Watt MH; MR17RP Ceiling Surface 1 Lamp/100 Watt MH; FS818RD Wall Surface 1 Lamp/50 Watt MH)

100’ x 100’ Area, .72 LLF (Source: IESNA Handbook)Catalog Nos. MR17WP-C-MW-150M-1, MR17RP-C-MW-100M-1,FS818RD-0-PIA-MW-50M-1

AVG MAX MIN AVG/ MAX/STAT AREA FC FC FC MIN MIN Building Exterior 5 9 2 2.1:1 3.9:1

�110�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 22: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

sPecIfIcaTIon Pages – Table of conTenTs

Ceiling - surface mount Linear FluorescentSSa .................................23SSaT5 .............................24SDSa ..............................25SDSaT5 ..........................26SSb .................................27SSC ................................28SSD .................................29SCa ................................30SCb ................................31SCC ................................32SCD .............................. 33SDa .............................. 34SDD ............................... 35pSDT5 .............................36SCH .............................. 37SCT ............................... 38

Ceiling - recessed AdaptableLinear FluorescentRmCa .......................... 39RmCD ............................40pRCT5 .............................41

Ceiling - recessed FlangeLinear FluorescentRCa .............................. 42RCb .............................. 43RCC ...............................44RCD .............................. 45

Ceiling - recessed GridLinear FluorescentRGa ............................. 46RGD ............................. 47

Wall - surface mountLinear FluorescentwCU .............................. 48wCH ............................. 49wCbU ........................... 50wCb .............................. 51wCT ............................... 52wCD ............................. 53 wDU ............................. 54wDD .............................. 55wDS ............................. 56

Wall - recessed Concrete PourCompact FluorescentRFw .............................. 57

Corner mountLinear FluorescentCC ............................... 58CD ................................ 59

Ceiling squares - surfaceCompact Fluorescent & HIDSSqa ............................. 60SqCa ........................... 61SqDa ............................ 62SqDb ............................ 63SqDC ............................ 64SqDD ........................... 65

Ceiling squares - recessed FlangeCompact Fluorescent & HIDRqCa ........................... 66RqCb ............................ 67RqCD ........................... 68

Ceiling squares - Concrete PourCompact Fluorescent & HIDRqpa .............................69Rqpb ............................. 70

Complementary Product –Wall Platessurface & Concrete Pour (1,� and 3-Gang)wSp/wpp .......................71

exit signsmighty mac™ LeDmmEX ........................... 72millenium metrex™ LeDmETSw ......................... 73mETSU/mETDU .............74

Institutional High Abusenova™ & sheriff™N548 ...............................75N1048 .............................76SH524 & SH548 .............77SH824 & SH848 .............78SH1248 ...........................79

Alpha numeric IndexCC ............................... 58CD ................................ 59mETDU ...........................74mETSU ...........................74mETSw ..........................73mmEX ............................72N548 ...............................75N1048 .............................76pRCT5 .............................41pSDT5 .............................36RCa .............................. 42RCb .............................. 43RCC ...............................44RCD .............................. 45RFw .............................. 57RGa ............................. 46RGD ............................. 47RmCa .......................... 39RmCD ............................40RqCa ........................... 66RqCb ............................ 67RqCD ........................... 68Rqpa .............................69Rqpb ............................. 70SCa ................................30SCb ................................31SCC ................................32SCD .............................. 33SCH .............................. 37SCT ............................... 38SDa .............................. 34SDD ............................... 35SDSa ..............................25SDSaT5 ..........................26SH524 & SH548 .............77SH824 & SH848 .............78SH1248 ...........................79SqCa ........................... 61SqDa ............................ 62SqDb ............................ 63SqDC ............................ 64SqDD ........................... 65SSa .................................23SSaT5 .............................24SSb .................................27SSC ................................28SSD .................................29SSqa ............................. 60wCb .............................. 51wCbU ........................... 50wCD ............................. 53 wCH ............................. 49wCT ............................... 52wCU .............................. 48wDD .............................. 55wDS ............................. 56wDU ............................. 54wSp/wpp .......................71

secuRITY DeTenTIon aRea lIgHTIng: MIgHTY Mac™

�� 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 23: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

2.00" dia. Wiring hole (4) .62" embossed mounting holes

25.50"(648mm)

22.00"(559mm)

7.00"(178mm)

13.00"”(330mm)

3.50"(89mm)

13.00"(330mm)

49.50"(1257mm)

23.00"(584mm)

2.00" dia. Wiring hole (6) .62" embossed mounting holes

7.00"(178mm)

13.00"(330mm)

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

ssa seRIes CEILING mOUNT SURFaCE HINGED CLamSHELL Lamps: biax, T8, T5, T5HOSize: Nominal 12"x24" and 12"x48"

nominal size2 12" x 24"4 12" x 48"

Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)9 12 Gauge CRS (painted)

Lamp Quantity 1 One2 Two3 Three

* Not available as base material• Not available with F54T5HO

Lamp type - �’ nominal Length 17 F17T831U F31T8 (1Lamp max.) 40b F40TT (2 Lamp max.)Lamp type - 4’ nominal Length28 F28T532 F32T854 F54T5HO

Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8, T5, T5HO) Sb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsEL• Standard Lumen EL pack pEL• High Lumen EL pack SEL• Specified EL packFS Single Fuse & Holder Sk Speaker Housing Extension TN pL Night Light - Lamp by others (2 Lamp max. w/ F54T5HO) DLN LED Night Light w/Light Level ControlUv Ultraviolet Filter wL wet Location ListedRGT Removable Gear TrayIH4 Full Length Internal Hinge

sPecIfIcaTIons

HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.

BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.

HInGe: Completely concealed drop slot piano type 2' internal hinge (1/2" knuckle/1/8" diam-eter pin) standard. pin secured to knuckle. Hinge welded to housing and mounts to either side of baseplate via keyholes. See Options for full length internal hinge (IH4).

Lens: as specified - maximum thickness .625" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z" brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.

PHotometrICs: Efficiency of SSa4-0/0-232-IS-1-120-1/b-1 = 67.2%. For additional photo-metric information, go to www.kenall.com.

oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

DIMensIonal DaTa

Cross section mounting Holes

ssa

�310�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 24: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

(6) .62" Embossed Mounting Holes

49.50"(1256mm)

46.00"(1168mm)

6.00"(182mm)

11.25"(286mm)

2.00" Dia. Wiring Hole

2.750" (70mm)

11.250" (286mm)

CEILING mOUNT SURFaCE HINGED CLamSHELL Lamps: T5, T5HOSize: Nominal 12" x 48"

nominal size4 12" x 48"

Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)

Lamp Quantity 1 One2 Two3 Three (F28T5 only)

Lamp type - 4’ nominal Length28 F28T554 F54T5HO (2 Lamp max.)

*Not available as base material**SN Option

Ballast type RS Rapid Start Electronic <10% THD Sb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass F** .125" Clear polycarbonate (Outer Lens Only)

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsFS Single Fuse & Holder TN Night Light - Lamp by others (Not available w/ 3 F54T5HO) DLN LED Night Light w/Light Level Control Uv Ultraviolet Filter SN Splash Non-Food Zone/National Sanitation Foundation ListedwL wet Location ListedIH4 Full Length Internal Hinge

sPecIfIcaTIons

HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.

BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contra-band concealment and access. Embossed standoffs prevent distortion.

HInGe: Completely concealed internal piano type 2' internal hinge (1/2" knuckle/1/8" diam-eter pin) standard. pin secured to knuckle. Hinge welded to housing and mounts to either side of baseplate via keyholes. See Options for full length internal hinge (IH4).

Lens: as specified - maximum total thickness .500" - see ordering information.

Lens retentIon: vertically adjustable “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Standard removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.

PHotometrICs: For photometric informa-tion, go to www.kenall.com.

oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

DIMensIonal DaTa

Cross section mounting Holes

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

ssaT5

ssaT5 seRIes

�4 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 25: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

12.25"311mm

3.50"89mm

14.56"370mm

36.00"914mm

49.43"1256mm

8.00"203mm

14.56"370mm

(4) .50" Dia.Mounting Holes

2.00" Dia. Wiring Hole(2) Mounting Keyholes

sDsa seRIes CEILING mOUNT SURFaCE HINGED DOOR Lamps: biax, T8, T5, T5HOSize: Nominal 12"x24" and 12"x48"

nominal size2 12" x 24"4 12" x 48"

Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted)2* 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6 14 Gauge SS (brushed) 7 16 Gauge SS (brushed)9 12 Gauge CRS (painted)

Lamp Quantity 1 One2 Two3 Three

*Not available as Door material

Lamp type - �’ nominal Length 17 F17T831U F31T8 (1 Lamp max.) 40b F40TT (2 Lamp max.)Lamp type - 4’ nominal Length28 F28T532 F32T854 F54T5HO

Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8, T5, T5HO) Sb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsEL• Standard Lumen EL pack pEL• High Lumen EL pack SEL• Specified EL packFS Single Fuse & Holder kO 1/2" EmT knockout Sk Speaker Housing Extension TN pL Night Light - Lamp by others (2 Lamp max. w/ F54T5HO) DLN LED Night Light w/Light Level Control Uv Ultraviolet Filter wL wet Location Listed RGT Removable Gear Tray IH2 Internal HingeIH4 Full Length Internal Hinge

• Not available with F54T5HO

sPecIfIcaTIons

HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).

Door: One-piece die-formed prime grade ma-terial as specified - see ordering information.

HInGe: Staked and welded external piano type hinge (1/2" knuckle/1/8" diameter pin) standard. See Options for 2' (IH2) and full length (IH4) internal hinge.

Lens: as specified - maximum thickness .625" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to door via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional Removable Gear Tray (RGT) with quick disconnect.

LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. U.S. Patent No. 7,325,939.

PHotometrICs: Efficiency of SDSa4-0/0-232-IS-1-120-1/b-1 = 56.3%. For additional photometric information, go to www.kenall.com.

DIMensIonal DaTa

Cross section mounting Holes

oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

sDsa

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

��10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 26: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

2.00" Dia. Wiring Hole (4) .50" Mounting Holes

49.44"(1256mm)

46.00"(1168mm)

6.25"(156mm)

12.50"(318mm)(2) Mounting

Keyholes

2.62" (67mm)

12.50" (318mm)

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

CEILING mOUNT SURFaCE HINGED DOOR Lamps: T5, T5HO Size: Nominal 12" x 48"

sPecIfIcaTIons

HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).

Door: One-piece die-formed prime grade ma-terial as specified - see ordering information.

HInGe: Full length staked and welded internal piano type hinge (1/2" knuckle/1/8" diameter pin) standard.

Lens: as specified - maximum total thickness .500" - see ordering information.

Lens retentIon: vertically adjustable “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Standard removable gear tray with quick disconnect.

LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. U.S. Patent No. 7,325,939.

PHotometrICs: For photometric informa-tion, go to www.kenall.com.

sDsaT5 seRIes

DIMensIonal DaTa

Cross section mounting Holes

oRDeRIng InfoRMaTIonseries nominal Door/Hsg. Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

sDsaT5

nominal size4 12" x 48"

Door/Housing material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted)2* 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6 14 Gauge SS (brushed) 7 16 Gauge SS (brushed)a* 18 Gauge SS (brushed)b* 18 Gauge SS (painted)

Lamp Quantity 1 One2 Two3 Three

*Not available as Door material**SN Option

Lamp type - 4’ nominal Length28 F28T554 F54T5HO

Ballast type RS Rapid Start Electronic <10% THD Sb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered GlassF** .125" Clear polycarbonate (Outer Lens Only)

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsFS Single Fuse & HolderkO 1/2" EmT knockouts TN Night Light - Lamp by others (Not available w/ 3 F54T5HO) DLN LED Night Light w/Light Level Control Uv Ultraviolet Filter SN Splash Non-Food Zone/National Sanitation Foundation ListedwL wet Location Listed

�6 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 27: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

3.50"(102mm)

17.00"(432mm)

2.00" dia. Wiring hole (4) .62" embossed mounting holes

25.50"(648mm)

22.00"(559mm)

11.00"(279mm)

17.00"(432mm)

49.50"(1257mm)

23.00"(584mm)

11.00"(279mm)

17.00"(432mm)

2.00" dia. Wiring hole (6) .62" embossed mounting holes

sPecIfIcaTIons

HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.

BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.

HInGe: Completely concealed drop slot piano type 2' internal hinge (1/2" knuckle/1/8" diam-eter pin) standard. pin secured to knuckle. Hinge welded to housing and mounts to either side of baseplate via keyholes. See Options for full length internal hinge (IH4).

Lens: as specified - maximum thickness .625" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.

PHotometrICs: Efficiency of SSb4-0/0-332-IS-1-120-1/b-1 = 66.5%. For additional photo-metric information, go to www.kenall.com.

ssb seRIes CEILING mOUNT SURFaCE HINGED CLamSHELL Lamps: biax, T8, T5, T5HO Size: Nominal 16"x24" and 16"x48"

nominal size2 16" x 24"4 16" x 48"

Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)9 12 Gauge CRS (painted)

Lamp Quantity 2 Two3 Three 4 Four

* Not available as base material• Two lamp max. w/ F54T5HO

Lamp type - �’ nominal Length 17 F17T831U F31T8 (2 Lamp max.) 40b F40TT (3 Lamp max.)Lamp type - 4’ nominal Length28 F28T532 F32T854 F54T5HO (3 Lamp max.)

Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8, T5, T5HO) Sb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsEL• Standard Lumen EL pack pEL• High Lumen EL pack SEL• Specified EL pack FS Single Fuse & Holder Sk Speaker Housing ExtensionTN pL Night Light - Lamp by others DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterwL wet Location ListedRGT Removable Gear TrayIH4 Full Length Internal Hinge

DIMensIonal DaTa

Cross section mounting Holes

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

oRDeRIng InfoRMaTIonseries nominal Door/Hsg. Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

ssb

�710�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 28: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

3.50"(89mm)

21.00"(533mm)

2.00" dia. Wiring hole (4) .62" embossed mounting holes

25.50"(648mm)

22.00"(559mm)

15.00"(381mm)

21.00"(533mm)

15.00"(381mm)

21.00"(533mm)

49.50"(1257mm)

23.00"(584mm)

2.00" dia. Wiring hole (6) .62" embossed mounting holes

ssc seRIes CEILING mOUNT SURFaCE HINGED CLamSHELL Lamps: biax, T8, T5, T5HO Size: Nominal 20"x24" and 20"x48"

nominal size2 20" x 24"4 20" x 48"

Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)9 12 Gauge CRS (painted)

Lamp Quantity2 Two3 Three 4 Four

* Not available as base material• Two lamp max. w/ F54T5HO

Lamp type - �’ nominal Length 17 F17T831U F31T8 (3 Lamp max.) 40b F40TTLamp type - 4’ nominal Length28 F28T532 F32T854 F54T5HO

Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8, T5, T5HO) Sb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsEL• Standard Lumen EL pack pEL• High Lumen EL pack SEL• Specified EL pack FS Single Fuse & Holder Sk Speaker Housing ExtensionTN pL Night Light - Lamp by others DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterwL wet Location ListedRGT Removable Gear TrayIH4 Full Length Internal Hinge

sPecIfIcaTIons

HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.

BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.

HInGe: Completely concealed drop slot piano type 2' internal hinge (1/2" knuckle/1/8" diam-eter pin) standard. pin secured to knuckle. Hinge welded to housing and mounts to either side of baseplate via keyholes. See Options for full length internal hinge (IH4).

Lens: as specified - maximum thickness .625" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.

PHotometrICs: Efficiency of SSC4-0/0-432-IS-1-120-1/9-1 = 68%. For additional photo-metric information, go to www.kenall.com.

DIMensIonal DaTa

Cross section mounting Holes

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

oRDeRIng InfoRMaTIonseries nominal Door/Hsg. Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outerssc

�8 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 29: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

3.50"(89mm)

25.00"(635mm)

2.00" dia. Wiring hole (4) .62" embossed mounting holes

25.50"(648mm)

22.00"(559mm)

19.00"(483mm)

25.00"(635mm)

19.00"(483mm)

25.00"(635mm)

49.50"(1257mm)

23.00"(584mm)

2.00" dia. Wiring hole (6) .62" embossed mounting holes

ssD seRIes

ssD

CEILING mOUNT SURFaCE HINGED CLamSHELL Lamps: biax, T8, T5, T5HO Size: Nominal 24"x24" and 24"x48"

nominal size2 24" x 24"4 24" x 48"

Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)9 12 Gauge CRS (painted)

Lamp Quantity2 Two3 Three 4 Four

* Not available as base material• Three lamp max. w/ F54T5HO

Lamp type - �’ nominal Length 17 F17T831U F31T8 (3 Lamp max.) 40b F40TTLamp type - 4’ nominal Length28 F28T532 F32T854 F54T5HO

Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8, T5, T5HO) Sb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsEL• Standard Lumen EL packpEL• High Lumen EL pack SEL• Specified EL pack FS Single Fuse & Holder Sk Speaker Housing ExtensionTN pL Night Light - Lamp by others DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterwL wet Location ListedRGT Removable Gear TrayIH4 Full Length Internal Hinge

sPecIfIcaTIons

HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.

BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.

HInGe: Completely concealed drop slot piano type 2' internal hinge (1/2" knuckle/1/8" diam-eter pin) standard. pin secured to knuckle. Hinge welded to housing and mounts to either side of baseplate via keyholes. See Options for full length internal hinge (IH4).

Lens: as specified - maximum thickness .625" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.

PHotometrICs: Efficiency of SSD4-0/0-432-IS-1-120-1/b-1 = 70%. For additional photo-metric information, go to www.kenall.com.

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

DIMensIonal DaTa

Cross section mounting Holes

oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

��10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 30: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

5.00"(127mm)

12.00"(305mm)

2.00" dia. Wiring hole (4) .62" mounting holes

27.75"(705mm)

24.00"(609mm)

8.00"(203mm)

12.00"(305mm)

2.00" dia. Wiring hole

(6) .62" mounting holes

51.25"(1302mm)

22.00"(558mm)

8.00"(203mm)

12.00"(305mm)

scanominal size2 12" x 24"4 12" x 48"

Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)9 12 Gauge CRS (painted)

Lamp Quantity 1 One2 Two

*Not available as base material

Lamp type - �’ nominal Length 17 F17T831U F31T8 (1Lamp max.) 40b F40TTLamp type - 4’ nominal Length32 F32T8

Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass N .750" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL pack FS Single Fuse & Holder Sk Speaker Housing ExtensionTN pL Night Light - Lamp by others DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterRGT Removable Gear Tray

oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

sca seRIes CEILING mOUNT SURFaCE HINGED CLamSHELL Lamps: biax, T8 Size: Nominal 12"x24" and 12"x48"

sPecIfIcaTIons

HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.

BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.

HInGe: Full length continuous heavy gauge piano type internal hinge (1/2" knuckle/1/8" di-ameter pin) standard. pin secured to knuckle. Hinge welded to housing and mounts to baseplate via keyholes.

Lens: as specified - maximum thickness .875" - see ordering information.

Lens RETENTION: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations. InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.

PHotometrICs: Efficiency of SCa4-0/0-232-IS-1-120-1/b-1 = 59.2%. For additional photo-metric information, go to www.kenall.com.

DIMensIonal DaTa

Cross section mounting Holes

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

30 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 31: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

5.00"(127mm)

16.00"(406mm)

2.00" dia. Wiring hole (4) .62" mounting holes

27.75"(705mm)

24.00"(609mm)

12.00"(305mm)

16.00"(406mm)

2.00" Dia. Wiring Hole (6) .62" Mounting Holes

51.25"(1296.6mm)

22.00"(558mm)

12.00"(305mm)

16.00"(406mm)

scb seRIes

scb

CEILING mOUNT SURFaCE HINGED CLamSHELL Lamps: biax, T8 Size: Nominal 16"x24" and 16"x48"

sPecIfIcaTIons

HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.

BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.

HInGe: Full length continuous heavy gauge piano type internal hinge (1/2" knuckle/1/8" di-ameter pin) standard. pin secured to knuckle. Hinge welded to housing and mounts to baseplate via keyholes.

Lens: as specified - maximum thickness .875" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations. InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.

PHotometrICs: Efficiency of SCb4-0/0-332-IS-1-120-1/b-1 = 63.5%. For additional photo-metric information, go to www.kenall.com.

nominal size2 16" x 24"4 16" x 48"

Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)9 12 Gauge CRS (painted)

Lamp Quantity2 Two3 Three 4 Four

*Not available as base material

Lamp type - �’ nominal Length 17 F17T831U F31T8 (2 Lamp max.) 40b F40TTLamp type - 4’ nominal Length32 F32T8

Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass N .750" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL pack FS Single Fuse & Holder Sk Speaker Housing ExtensionTN pL Night Light - Lamp by others DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterRGT Removable Gear Tray

DIMensIonal DaTa

Cross section mounting Holes

oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

3110�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 32: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

5.00"(127mm)

20.00"(508mm)

2.00" dia. Wiring hole (4) .62" mounting holes

27.75"(705mm)

24.00"(609mm)

16.00"(406mm)

20.00"(508mm)

2.00" Dia. Wiring Hole (6) .62" Mounting Holes

51.25"(1302mm)

22.00"(558mm)

16.00"(406mm)

20.00"(508mm)

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

scc seRIes CEILING mOUNT SURFaCE HINGED CLamSHELL Lamps: biax, T8 Size: Nominal 20"x24" and 20"x48"

scc

sPecIfIcaTIons

HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.

BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.

HInGe: Full length continuous heavy gauge piano type internal hinge (1/2" knuckle/1/8" di-ameter pin) standard. pin secured to knuckle. Hinge welded to housing and mounts to baseplate via keyholes.

Lens: as specified - maximum thickness .875" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations. InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.

PHotometrICs: Efficiency of SCC4-0/0-332-IS-1-120-1/a-1 = 69.2%. For additional photo-metric information, go to www.kenall.com.

nominal size2 20" x 24"4 20" x 48"

Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)9 12 Gauge CRS (painted)

Lamp Quantity2 Two3 Three 4 Four

*Not available as base material

Lamp type - �’ nominal Length 17 F17T831U F31T8 (3 Lamp max.) 40b F40TTLamp type - 4’ nominal Length32 F32T8

Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered GlassN .750" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL pack FS Single Fuse & Holder Sk Speaker Housing ExtensionTN pL Night Light - Lamp by others DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterRGT Removable Gear Tray

oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

DIMensIonal DaTa

Cross section mounting Holes

3� 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 33: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

5.00"(127mm)

24.00"(610mm)

2.00" dia. Wiring hole (4) .62" mounting holes

27.75"(705mm)

24.00"(609mm)

20.00"(508mm)

24.00"(610mm)

2.00" dia. Wiring hole (6) .62" mounting holes

51.25"(1302mm)

22.00"(558mm)

20.00"(508mm) 24.00"

(610mm)

scD seRIes

scD

CEILING mOUNT SURFaCE HINGED CLamSHELL Lamps: biax, T8 Size: Nominal 24"x24" and 24"x48"

nominal size2 24" x 24"4 24" x 48"

Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)9 12 Gauge CRS (painted)

Lamp Quantity2 Two3 Three 4 Four

*Not available as base material

Lamp type - �’ nominal Length 17 F17T831U F31T8 (3 Lamp max.) 40b F40TTLamp type - 4’ nominal Length32 F32T8

Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered GlassN .750" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL pack FS Single Fuse & Holder Sk Speaker Housing ExtensionTN pL Night Light - Lamp by others DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterRGT Removable Gear Tray

sPecIfIcaTIons

HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.

BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.

HInGe: Full length continuous heavy gauge piano type internal hinge (1/2" knuckle/1/8" di-ameter pin) standard. pin secured to knuckle. Hinge welded to housing and mounts to baseplate via keyholes.

Lens: as specified - maximum thickness .875" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations.

InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.

PHotometrICs: Efficiency of SCD4-0/0-432-IS-1-120-1/b-1 = 65.6%. For additional photo-metric information, go to www.kenall.com.

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

DIMensIonal DaTa

Cross section mounting Holes

oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

3310�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 34: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

12.37"314mm

3.50"89mm

22.00"

25.43"

7.50"12.00"

46.00"

49.43"

7.50"12.00"

(4) .50" Dia.Mounting Holes

2.00" Dia. Wiring Hole(2) Mounting Keyholes

2.00" Dia. Wiring Hole

(2) .50" Dia.Mounting Holes

(2) Mounting Keyholes

2.00" dia. Wiring hole

(2) .50" mounting holes

25.43"(646mm)

14.00"(356mm)

8.00"(203mm)

12.37"(314mm)

(2) mounting keyholes

2.00" dia. Wiring hole

(4) .50" mounting holes

49.43"(1255mm)

36.00"(914mm)

8.00"(203mm)

12.37"(314mm)(2) mounting

keyholes

sDa seRIes

oRDeRIng InfoRMaTIonseries nominal Hsg./Door Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

sDa

CEILING mOUNT SURFaCE HINGED DOOR Lamps: biax, T8, T5, T5HO Size: Nominal 12"x24" and 12"x48"

sPecIfIcaTIons

HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).

Door: One-piece die-formed prime grade ma-terial as specified - see ordering information.

HInGe: Staked and welded external piano type hinge (1/2" knuckle/1/8" diameter pin) standard. See Options for internal hinge (IH2) and full length (IH4) internal hinge.

Lens: as specified - maximum thickness .625" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional Removable Gear Tray (RGT) with quick disconnect.

LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions.

PHotometrICs: Efficiency of SDa4-0/0-232-IS-1-120-1/b-1 = 56.3%. For additional photo-metric information, go to www.kenall.com.

nominal size2 12" x 24"4 12" x 48"

Housing/Door material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 2* 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6 14 Gauge SS (brushed) 7 16 Gauge SS (brushed)9 12 Gauge CRS (painted)

Lamp Quantity 1 One2 Two3 Three (F32T8, F54T5HO and F28T5 only)

*Not available as Door material

Lamp type - �’ nominal Length 17 F17T831U F31T8 (1Lamp max.) 40b F40TTLamp type - 4’ nominal Length28 F28T532 F32T854 F54T5HO

Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8, T5, T5HO) Sb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsEL• Standard Lumen EL pack pEL• High Lumen EL pack SEL• Specified EL packFS Single Fuse & Holder kO 1/2" EmT knockout Sk Speaker Housing ExtensionTN pL Night Light - Lamp by others (2 Lamp max. w/ F54T5HO) DLN LED Night Light w/Light Level Control Uv Ultraviolet Filter SN Splash Non-Food Zone/National Sanitation Foundation ListedwL wet Location Listed RGT Removable Gear TrayIH2 Internal HingeIH4 Full Length Internal Hinge

• Not available w/ F54T5HO

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

DIMensIonal DaTa

Cross section mounting Holes

34 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 35: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

23.00"584mm

3.50"89mm

18.50"

(2) Mounting Keyholes

2.00" Dia. Wiring Hole

(2) .50" Dia.Mounting Holes

22.00"

25.43"

23.00" 18.50"

(2) Mounting Keyholes2.00" Dia. Wiring Hole (4) .50" Dia.

Mounting Holes

46.00"

49.43"

23.00"

2.00" dia. Wiring hole

(2) .50" mounting holes

25.43"(646mm)

14.00"(356mm)

18.50"(470mm)

23.00"(584mm)

(2) mounting keyholes

2.00" dia. Wiring hole

(4) .50" mounting holes

49.43"(1255mm)

36.00"(914mm)

18.50"(470mm)

23.00"(584mm)

(2) mounting keyholes

sDD seRIes

sDD

CEILING mOUNT SURFaCE HINGED DOOR Lamps: biax, T8, T5, T5HO Size: Nominal 24"x24" and 24"x48"

nominal size2 24" x 24"4 24" x 48"

Housing/Door material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 2* 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6 14 Gauge SS (brushed) 7 16 Gauge SS (brushed)9 12 Gauge CRS (painted)

Lamp Quantity2 Two3 Three4 Four

*Not available as Door material

Lamp type - �’ nominal Length 17 F17T831U F31T8 (3 Lamp max.) 40b F40TTLamp type - 4’ nominal Length28 F28T532 F32T854 F54T5HO

Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8, T5, T5HO) Sb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsEL• Standard Lumen EL pack pEL• High Lumen EL pack SEL• Specified EL packFS Single Fuse & Holder kO 1/2" EmT knockout Sk Speaker Housing ExtensionTN pL Night Light - Lamp by others DLN LED Night Light w/Light Level Control Uv Ultraviolet Filter SN Splash Non-Food Zone/National Sanitation Foundation ListedwL wet Location Listed RGT Removable Gear Tray IH2 Internal HingeIH4 Full Length Internal Hinge

• Three lamp max. w/F54T5HO

sPecIfIcaTIons

HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).

Door: One-piece die-formed prime grade ma-terial as specified - see ordering information.

HInGe: Staked and welded external piano type hinge (1/2" knuckle/1/8" diameter pin) standard. See Options for internal hinge (IH2) and full length (IH4) internal hinge.

Lens: as specified - maximum thickness .625" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional Removable Gear Tray (RGT) with quick disconnect.

LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions.

PHotometrICs: Efficiency of SDD4-0/0-432-IS-1-120-1/b-1 = 63.6%. For additional photometric information, go to www.kenall.com.

oRDeRIng InfoRMaTIonseries nominal Hsg./Door Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

DIMensIonal DaTa

Cross section mounting Holes

3�10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 36: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

2.00" Dia. Wiring Hole (4) .50" Mounting Holes

(2) Mounting Keyholes

49.25"(1255mm)

46.00"(914mm)

17.00"(457mm)

22.00"(559mm)

2.62"(67mm)

22.00"(559mm)

oRDeRIng InfoRMaTIonseries nominal Door/Hsg. Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

CEILING mOUNT SURFaCE HINGED DOOR Lamps: T5, T5HO Size: Nominal 24" x 48"

nominal size4 24" x 48"

Door/Housing material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted)2** 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6 14 Gauge SS (brushed) 7 16 Gauge SS (brushed)a** 18 Gauge SS (brushed) b** 18 Gauge SS (painted)

Lamp Quantity2 Two3 Three4 Four5 Five6 Six

*SN Option**Not available in Door material

Lamp type - 4’ nominal Length28 F28T554 F54T5HO

Ballast type RS Rapid Start Electronic <10% THD Sb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered GlassF* .125" Clear polycarbonate (Outer Lens Only)

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsFS Single Fuse & HolderkO 1/2" EmT knockouts (Ends) TN Night Light - Lamp by others DLN LED Night Light w/Light Level Control Uv Ultraviolet Filter SN Splash Non-Food Zone/ National Sanitation Foundation ListedwL wet Location Listed

PsDT5

sPecIfIcaTIons

HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).

Door: One-piece die-formed prime grade ma-terial as specified - see ordering information.

HInGe: Full length staked and welded internal piano type hinge (1/2" knuckle/1/8" diameter pin) standard.

Lens: as specified - maximum total thickness .500" - see ordering information.

Lens retentIon: vertically adjustable “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Standard removable gear tray with quick disconnect.

LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions.

PHotometrICs: For photometric informa-tion, go to www.kenall.com.

PsDT5 seRIes

DIMensIonal DaTa

Cross section mounting Holes

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

36 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 37: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

5.25"(133mm)

21.00"(533mm)

2.00" dia. Wiring hole (4) .62" embossed mounting holes

25.50"(648mm)

22.00"(559mm)

15.00"(381mm)

21.00"(533mm)

2.00" dia. Wiring hole (6) .62" embossed mounting holes

49.50"(1232mm)

23.00"(584mm)

15.00"(381mm)

21.00"(533mm)

scH seRIes CEILING mOUNT SURFaCE HINGED CLamSHELL Lamps: biax, T8 Size: Nominal 20"x24" and 20"x48"

scH

sPecIfIcaTIons

HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.

BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.

HInGe: Completely concealed drop slot piano type 2' internal hinge (1/2" knuckle/1/8" diam-eter pin) standard. pin secured to knuckle. Hinge welded to housing and mounts to either side of baseplate via keyholes. See Options for full length internal hinge (IH4).

Lens: as specified - maximum thickness .625" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.

PHotometrICs: Efficiency of SCH4-0/0-332-IS-1-120-1/b-1 = 60%. For additional photo-metric information, go to www.kenall.com.

nominal size2 20" x 24"4 20" x 48"

Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)9 12 Gauge CRS (painted)

Lamp Quantity2 Two3 Three

*Not available as base material

Lamp type - �’ nominal Length 17 F17T8 40b F40TTLamp type - 4’ nominal Length32 F32T8

Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL pack FS Single Fuse & Holder Sk Speaker Housing ExtensionTN pL Night Light - Lamp by others DLN LED Night Light w/Light Level Control Uv Ultraviolet Filter SN Splash Non-Food Zone/ National Sanitation Foundation ListedwL wet Location ListedRGT Removable Gear TrayIH4 Full Length Internal Hinge

DIMensIonal DaTa

Cross section mounting Holes

oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

3710�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 38: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

5.25"(133mm)

13.00"(330mm)

2.00" dia. Wiring hole (4) .62" mounting holes

26.50"(673mm)

10.50"(267mm)

7.00"(178mm)

13.00"(330mm)

2.00" dia. Wiring hole (6) .62" mounting holes

50.50"(1283mm)

22.50"(571mm)

7.00"(178mm)

13.00"(330mm)

scT seRIes

scT

CEILING mOUNT SURFaCE HINGED CLamSHELL Lamps: biax, T8, T5, T5HO Size: Nominal 12"x24" and 12"x48"

nominal size2 12" x 24"4 12" x 48"

Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)9 12 Gauge CRS (painted)

Lamp Quantity2 Two3 Three

* Not available as base material• Not available w/ F54T5HO

Lamp type - �’ nominal Length 17 F17T8 40b F40TTLamp type - 4’ nominal Length28 F28T532 F32T854 F54T5HO (2 Lamp max.)

Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8, T5, T5HO) Sb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsEL• Standard Lumen EL pack pEL• High Lumen EL pack SEL• Specified EL pack FS Single Fuse & Holder Sk Speaker Housing ExtensionTN pL Night Light - Lamp by others (2 Lamp max. with F54T5HO) DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterwL wet Location ListedRGT Removable Gear TrayIH4 Full Length Internal Hinge

DIMensIonal DaTa

Cross section mounting Holes

sPecIfIcaTIons

HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.

BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.

HInGe: Completely concealed drop slot piano type 2' internal hinge (1/2" knuckle/1/8" diam-eter pin) standard. pin secured to knuckle. Hinge welded to housing and mounts to either side of baseplate via keyholes. See Options for full length internal hinge (IH4).

Lens: as specified - maximum thickness .625" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.

PHotometrICs: Efficiency of SCT4-0/0-232-IS-1-120-1/b-1 = 57.5%. For additional photo-metric information, go to www.kenall.com.

oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

38 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 39: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

11.750" (298mm)

4.875" (124mm)

.437" (11mm)

11.875"(302mm)

(2) 1/2" EMT K.O. Access Plate (On side) (6) .50" x .88" OBROUND

48.00”(1219mm)

20.50"(521mm)

20.50"(521mm)

4.360"(111mm)

RMca seRIes

RMca

CEILING mOUNT RECESSED HINGED DOORFRamE Lamps: biax, T8 Size: Nominal 12"x24" and 12"x48"

sPecIfIcaTIons

HousInG: Die-formed prime grade material as specified - see ordering information. TIG and spot welded construction.

Door: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).

HInGe: Full length completely concealed piano type internal hinge (1/2" knuckle/1/8" di-ameter pin) standard. pin secured to knuckle. Hinge welded to door.

Lens: as specified - maximum thickness .500" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. Non IC rated.

PHotometrICs: Efficiency of RmCa4-2/2-232-IS-1-120-1/9-1 = 51%. For additional pho-tometric information, go to www.kenall.com.

nominal size2 12" x 24"4 12" x 48"

Ceiling type FL/TR Flange/Threaded RodFL/CC Flange/Cross ChannelFL/Y Flange/Yoke FL/Sa Flange/Swing-Out armsTG T-Grid mp metal panCZ Concealed Z-Spline

Door/Housing material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 2 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted)b 18 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed) a* 18 Gauge SS (brushed)

*Not available as Hsg. material

Lamp Quantity 1 One2 Two3 Three

Lamp type - �’ nominal Length 17 F17T831U F31T8 (1 Lamp max.) 40b F40TT (2 Lamp max.)Lamp type - 4’ nominal Length32 F32T8

Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL packFS Single Fuse & Holder SC Specified Ceiling TN pL Night Light - Lamp by others DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterwL wet Location Listed

oRDeRIng InfoRMaTIonseries nominal Door/Hsg. Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

DIMensIonal DaTa

Cross section mounting Holes

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

Recommended Ceiling Cutout: 48.250" x 10.437"

3�10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 40: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

23.750" (603mm)

4.875"(124mm)

.437" (11mm)

16.00"(406mm)

(2) 1/2" EMT K.O. Access Plate (On side) (6) .50" x .88" OBROUND

48.00”(1219mm)

20.50"(521mm)

20.50"(521mm)

23.875"(606mm)

RMcD seRIes

oRDeRIng InfoRMaTIonseries nominal Door/Hsg. Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

RMcD

CEILING mOUNT RECESSED HINGED DOORFRamE Lamps: biax, T8 Size: Nominal 24"x24" and 24"x48"

sPecIfIcaTIons

HousInG: Die-formed prime grade material as specified - see ordering information. TIG and spot welded construction.

Door: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).

HInGe: Full length completely concealed piano type internal hinge (1/2" knuckle/1/8" di-ameter pin) standard. pin secured to knuckle. Hinge welded to door.

Lens: as specified - maximum thickness .500" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. Non IC rated.

PHotometrICs: Efficiency of RmCD4-2/2-432-IS-1-120-1/9-1 = 64.5%. For additional photometric information, go to www.kenall.com.

nominal size2 24" x 24"4 24" x 48"

Ceiling type FL/TR Flange/Threaded RodFL/CC Flange/Cross ChannelFL/Y Flange/Yoke FL/Sa Flange/Swing-Out armsTG T-Grid mp metal pan CZ Concealed Z-Spline

Door/Housing material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 2 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted)b 18 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed) a* 18 Gauge SS (brushed)

*Not available as Hsg. material

Lamp Quantity2 Two3 Three 4 Four

Lamp type - �’ nominal Length 17 F17T831U F31T8 (3 Lamp max.) 40b F40TT 55b F55TTLamp type - 4’ nominal Length32 F32T8

Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL packFS Single Fuse & Holder SC Specified Ceiling TN pL Night Light - Lamp by others DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterwL wet Location Listed

DIMensIonal DaTa

Cross section mounting Holes

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

Recommended Ceiling Cutout: 48.250" x 22.437"

40 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 41: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

23.75"(603mm)

21.73"(552mm)

2.88"(73mm)

.58"(15mm)

.221

48.00"(1219mm)

23.88"(607mm)

(2) 1/2" EMT K.O. Access Plate (6) .50" x .88" OBROUND

18.00"(533mm)

20.50"(521mm)

20.50"(521mm)

oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

PRcT5

CEILING mOUNT RECESSED HINGED DOORFRamE Lamps: T5, T5HO Size: Nominal 24" x 48"

nominal size4 24" x 48"

Ceiling typeFL/TR Flange/Threaded Rod FL/CC Flange/Cross Channel FL/Y Flange/Yoke FL/Sa Flange/Swing-Out arms TG T-Grid

Door/Housing material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted)2 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) b 18 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed) a* 18 Gauge SS (brushed)

*Not available as base material**SN Option

Lamp Quantity2 Two3 Three4 Four5 Five6 Six

Lamp type - 4’ nominal Length28 F28T554 F54T5HO

Ballast type RS Rapid Start Electronic <10% THD Sb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered GlassF** .125" Clear polycarbonate (Outer Lens Only)

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsFS Single Fuse & Holder TN pL Night Light - Lamp by others DLN LED Night Light w/Light Level Control Uv Ultraviolet Filter SN Splash Non-Food Zone/ National Sanitation Foundation ListedwL wet Location Listed

sPecIfIcaTIons

HousInG: Die-formed prime grade material as specified - see ordering information. TIG and spot welded construction.

Door: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).

HInGe: Full length completely concealed in-ternal piano type internal hinge (1/2" knuck-le/1/8" diameter pin) standard. pin secured to knuckle. Hinge welded to door.

Lens: as specified - maximum total thickness .500" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p.

LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. Non IC rated.

PHotometrICs: For photometric informa-tion, go to www.kenall.com.

PRcT5 seRIes

Recommended Ceiling Cutout: 48.25" x 22.50"

DIMensIonal DaTa

Cross section mounting Holes

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

4110�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 42: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

13.50"(341.5mm)

3.00"(76.2mm)

(2) 1/2" emt k.o. access plate

(4) 1.25" x .75" obround

21.00"(533mm)

9.00"(229mm)

12.00"(305mm)

25.00"(635mm)

(2) 1/2" emt k.o. access plate (6) 1.25" x .75" obround

9.00"(229mm)

12.00"(305mm)

49.00"(1245mm)

18.00"(457mm)

18.00"(457mm)

Rca seRIes

Rca

CEILING mOUNT RECESSEDHINGED DOORFRamE Lamps: biax, T8, T5, T5HO Size: Nominal 12"x24" and 12"x48"

sPecIfIcaTIons

HousInG: Die-formed prime grade material as specified - see ordering information. TIG and spot welded construction.

Door: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).

HInGe: Completely concealed spring loaded drop slot piano type internal hinge (1/2" knuck-le/1/8" diameter pin) standard. pin secured to knuckle. Hinge welded to door and mounts to housing via keyholes. See Options for full length internal hinge (IH4).

Lens: as specified - maximum thickness .625" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. Non IC rated. InstALLAtIon: See Options for specific mounting hardware required. See security detention Recessed Installation Data Technical Sheet or consult factory with questions.

PHotometrICs: Efficiency of RCa4-0/0-232-IS-1-120-1/b-1 = 57.2%. For additional photo-metric information, go to www.kenall.com.

nominal size2 12" x 24"4 12" x 48"

Door/Housing material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted)2* 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6** 14 Gauge SS (brushed) 7** 16 Gauge SS (brushed)9 12 Gauge CRS (painted)

Lamp Quantity 1 One2 Two3 Three

* Not available as Door material** Not available as Hsg. material• Not available w/ F54T5HO

Lamp type - �’ nominal Length 17 F17T831U F31T8 (1Lamp max.) 40b F40TT (2 Lamp max.)Lamp type - 4’ nominal Length28 F28T532 F32T8 54 F54T5HO (2 Lamp max.)

Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8, T5, T5HO) Sb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsCC Cross Channel mounting kitpF plaster Frame mounting kit YF Yoke Frame mounting kitEL• Standard Lumen EL pack pEL• High Lumen EL pack SEL• Specified EL pack FS Single Fuse & HolderSk Speaker Housing ExtensionTN pL Night Light - Lamp by others (Two Lamp max. w/ F54T5HO) DLN LED Night Light w/Light Level Control Uv Ultraviolet Filter SN Splash Non-Food Zone/ National Sanitation Foundation ListedwL wet Location ListedIH4 Full Length Internal Hinge

oRDeRIng InfoRMaTIonseries nominal Door/Hsg. Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

DIMensIonal DaTa

Cross section mounting Holes

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

4� 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 43: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

17.50"(442.7mm)

3.00"(76.2mm)

21.00"(533mm)

(2) 1/2" emt k.o. access plate (4) 1.25" x .75" obround

13.00"(330mm)

16.00"(406mm)

25.00"(635mm)

(2) 1/2" emt k.o. access plate

49.00"(1245mm)

(6) 1.25" x .75" obround

13.00"(330mm)

16.00"(406mm)

18.00"(457mm)

18.00"(457mm)

Rcb seRIes

Rcb

CEILING mOUNT RECESSED HINGED DOORFRamE Lamps: biax, T8, T5, T5HO Size: Nominal 16"x24" and 16"x48"

nominal size2 16" x 24"4 16" x 48"

Door/Housing material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted)2* 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6** 14 Gauge SS (brushed) 7** 16 Gauge SS (brushed)9 12 Gauge CRS (painted)

Lamp Quantity2 Two3 Three 4 Four

* Not available as Door material** Not available as Hsg. material• Three lamp max. w/ F54T5HO

Lamp type - �’ nominal Length 17 F17T831U F31T8 (2 Lamp max.) 40b F40TTLamp type - 4’ nominal Length28 F28T532 F32T854 F54T5HO

Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8, T5, T5HO) Sb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsCC Cross Channel mounting kitpF plaster Frame mounting kitYF Yoke Frame mounting kitEL• Standard Lumen EL pack pEL• High Lumen EL pack SEL• Specified EL pack FS Single Fuse & Holder Sk Speaker Housing ExtensionTN pL Night Light - Lamp by others DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterSN Splash Non-Food Zone/ National Sanitation Foundation ListedwL wet Location ListedIH4 Full Length Internal Hinge

sPecIfIcaTIons

HousInG: Die-formed prime grade material as specified - see ordering information. TIG and spot welded construction.

Door: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).

HInGe: Completely concealed spring loaded drop slot piano type internal hinge (1/2" knuck-le/1/8" diameter pin) standard. pin secured to knuckle. Hinge welded to door and mounts to housing via keyholes. See Options for full length internal hinge (IH4).

Lens: as specified - maximum thickness .625" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. Non IC rated. InstALLAtIon: See Options for specific mounting hardware required. See security detention Recessed Installation Data Technical Sheet or consult factory with questions.

PHotometrICs: Efficiency of RCb4-0/0-332-IS-1-120-1/b-1 = 57.8%. For additional photo-metric information, go to www.kenall.com.

oRDeRIng InfoRMaTIonseries nominal Door/Hsg. Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

DIMensIonal DaTa

Cross section mounting Holes

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

4310�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 44: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

21.50"(543.9mm)

3.00"(76.2mm)

(2) 1/2" emt k.o. access plate

(4) 1.25" x .75" obround

21.00"(533mm)

17.00"(432mm)

20.00"(508mm)

25.00"(635mm)

(2) 1/2" emt k.o. access plate (6) 1.25" x .75" obround

17.00"(432mm)

20.00"(508mm)

49.00"(1245mm)

18.00"(457mm)

18.00"(457mm)

Rcc seRIes

Rcc

CEILING mOUNT RECESSED HINGED DOORFRamE Lamps: biax, T8, T5, T5HO Size: Nominal 20"x24" and 20"x48"

sPecIfIcaTIons

HousInG: Die-formed prime grade material as specified - see ordering information. TIG and spot welded construction.

Door: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).

HInGe: Completely concealed spring loaded drop slot piano type internal hinge (1/2" knuck-le/1/8" diameter pin) standard. pin secured to knuckle. Hinge welded to door and mounts to housing via keyholes. See Options for full length internal hinge (IH4).

Lens: as specified - maximum thickness .625" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. Non IC rated. InstALLAtIon: See Options for specific mounting hardware required. See security detention Recessed Installation Data Technical Sheet or consult factory with questions.

PHotometrICs: Efficiency of RCC4-0/0-332-IS-1-120-1/b-1 = 64.7%. For additional photo-metric information, go to www.kenall.com.

nominal size2 20" x 24"4 20" x 48"

Door/Housing material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted)2* 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6** 14 Gauge SS (brushed) 7** 16 Gauge SS (brushed)9 12 Gauge CRS (painted)

Lamp Quantity2 Two3 Three 4 Four

*Not available as Door material**Not available as Hsg. material

Lamp type - �’ nominal Length 17 F17T831U F31T8 (3 Lamp max.) 40b F40TTLamp type - 4’ nominal Length28 F28T532 F32T854 F54T5HO

Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8, T5, T5HO) Sb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsCC Cross Channel mounting kitpF plaster Frame mounting kitYF Yoke Frame mounting kitEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL pack FS Single Fuse & Holder Sk Speaker Housing ExtensionTN pL Night Light - Lamp by others DLN LED Night Light w/Light Level ControlUv Ultraviolet FilterSN Splash Non-Food Zone/ National Sanitation Foundation ListedwL wet Location ListedIH4 Full Length Internal Hinge

oRDeRIng InfoRMaTIonseries nominal Door/Hsg. Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

DIMensIonal DaTa

Cross section mounting Holes

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

44 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 45: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

25.50"(645.1mm)

3.00"(76.2mm)

(2) 1/2" emt k.o. access plate

(4) 1.25" x .75" obround

21.00"(533mm)

21.00"(533mm)

24.00"(610mm)

25.00"(635mm)

(2) 1/2" emt k.o. access plate (6) 1.25" x .75" obround

49.00"(1245mm)

18.00"(457mm)

18.00"(457mm)

21.00"(533mm)

24.00"(610mm)

RcD seRIes

RcD

CEILING mOUNT RECESSED HINGED DOORFRamE Lamps: biax, T8, T5, T5HO Size: Nominal 24"x24" and 24"x48"

sPecIfIcaTIons

HousInG: Die-formed prime grade material as specified - see ordering information. TIG and spot welded construction.

Door: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).

HInGe: Completely concealed spring loaded drop slot piano type internal hinge (1/2" knuck-le/1/8" diameter pin) standard. pin secured to knuckle. Hinge welded to door and mounts to housing via keyholes. See Options for full length internal hinge (IH4).

Lens: as specified - maximum thickness .625" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. Non IC rated. InstALLAtIon: See Options for specific mounting hardware required. See security detention Recessed Installation Data Technical Sheet or consult factory with questions.

PHotometrICs: Efficiency of RCD4-0/0-432-IS-1-120-1/b-1 = 66.4%. For additional photometric information, go to www.kenall.com.

nominal size2 24" x 24"4 24" x 48"

Door/Housing material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted)2* 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6** 14 Gauge SS (brushed) 7** 16 Gauge SS (brushed)9 12 Gauge CRS (painted)

Lamp Quantity2 Two3 Three 4 Four

*Not available as Door material**Not available as Hsg. material

Lamp type - �’ nominal Length 17 F17T831U F31T8 (3 Lamp max.) 40b F40TTLamp type - 4’ nominal Length28 F28T532 F32T854 F54T5HO

Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8, T5, T5HO) Sb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsCC Cross Channel mounting kitpF plaster Frame mounting kitYF Yoke Frame mounting kitEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL pack FS Single Fuse & Holder Sk Speaker Housing ExtensionTN pL Night Light - Lamp by others DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterSN Splash Non-Food Zone/ National Sanitation Foundation ListedwL wet Location ListedIH4 Full Length Internal Hinge

oRDeRIng InfoRMaTIonseries nominal Door/Hsg. Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

DIMensIonal DaTa

Cross section mounting Holes

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

4�10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 46: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

12.00"(303.6mm)

5.00"(126.5mm)

(2) 1/2" EMT K.O. Access Plate

24.00"(610mm)

11.75"(298mm)

(2) 1/2" EMT K.O. Access Plate

48.00"(1219mm)

11.75"(298mm)

Rga seRIes

Rga

CEILING mOUNT RECESSED HINGED DOORFRamE Lamps: biax, T8 Size: Nominal 12"x24" and 12"x48"

sPecIfIcaTIons

HousInG: Die-formed prime grade material as specified - see ordering information. TIG and spot welded construction.

Door: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).

HInGe: Completely concealed spring loaded drop slot piano type internal hinge (1/2" knuck-le/1/8" diameter pin). pin secured to knuckle. Hinge welded to door and mounts to housing via keyholes. See Options for full length inter-nal hinge (IH4).

Lens: as specified - maximum thickness .625" - see ordering information.

Lens RETENTION: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. Non IC rated.

PHotometrICs: Efficiency of RGa4-2/2-232-IS-1120-1/9-1 = 51%. For additional photomet-ric information, go to www.kenall.com.

nominal size2 12" x 24"4 12" x 48"

Door/Housing material0** 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 2* 18 Gauge CRS (painted) 3** 14 Gauge SS (painted) 4 16 Gauge SS (painted)b 18 Gauge SS (painted) 6** 14 Gauge SS (brushed) 7** 16 Gauge SS (brushed)

Lamp Quantity 1 One2 Two3 Three

*Not available as Door material**Not available as Hsg. material

Lamp type - �’ nominal Length 17 F17T831U F31T8 (1Lamp max.) 40b F40TTLamp type - 4’ nominal Length32 F32T8

Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL packFS Single Fuse & Holder SC Specified CeilingTN pL Night Light - Lamp by others DLN LED Night Light w/Light Level Control Uv Ultraviolet Filter wL wet Location Listed

oRDeRIng InfoRMaTIonseries nominal Door/Hsg. Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

DIMensIonal DaTa

Cross section mounting Holes

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

46 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 47: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

24.00"

5.00"(126.5mm)

(607.2mm)

(2) 1/2" EMT K.O. Access Plate

24.00"(610mm)

23.75"(603mm)

(2) 1/2" EMT K.O. Access Plate

48.00"(1219mm)

23.75"(603mm)

RgD seRIes

RgD

CEILING mOUNT RECESSED HINGED DOORFRamE Lamps: biax, T8 Size: Nominal 24"x24" and 24"x48"

sPecIfIcaTIons

HousInG: Die-formed prime grade material as specified - see ordering information. TIG and spot welded construction.

Door: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).

HInGe: Completely concealed spring loaded drop slot piano type internal hinge (1/2" knuck-le/1/8" diameter pin) standard. pin secured to knuckle. Hinge welded to door and mounts to housing via keyholes. See Options for full length internal hinge (IH4).

Lens: as specified - maximum thickness .625" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. Non IC rated.

PHotometrICs: Efficiency of RGD4-2/2-432-IS-1-120-1/9-1 = 64.5%. For additional photometric information, go to www.kenall.com.

nominal size2 24" x 24"4 24" x 48"

Door/Housing material0** 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 2* 18 Gauge CRS (painted) 3** 14 Gauge SS (painted) 4 16 Gauge SS (painted)b 18 Gauge SS (painted) 6** 14 Gauge SS (brushed) 7** 16 Gauge SS (brushed)

Lamp Quantity2 Two3 Three4 Four

*Not available as Door material**Not available as Hsg. material

Lamp type - �’ nominal Length 17 F17T831U F31T8 (3 Lamp max.) 40b F40TTLamp type - 4’ nominal Length32 F32T8

Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL packFS Single Fuse & Holder SC Specified CeilingTN pL Night Light - Lamp by others DLN LED Night Light w/Light Level Control Uv Ultraviolet Filter wL wet Location Listed

oRDeRIng InfoRMaTIonseries nominal Door/Hsg. Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

DIMensIonal DaTa

Cross section mounting Holes

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

4710�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 48: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

7.00"(178mm)

10.25"(260mm)

2.00" Dia. Wiring Hole (4) .62" Mounting Holes

10.25"(260mm)

5.00"(127mm)

12.00"(305mm)

16.75" (425mm)

52.75"(1340mm)

48.00"(1219mm) 24.00"

(609mm)

2.00" Dia. Wiring Hole (6) .62" Mounting Holes

10.25"(260mm)

5.00"(127mm)

5.00"(127mm)

10.25"(260mm)

2.00" Dia. Wiring Hole (4) .62" Mounting Holes

24.00" (610mm)

28.75" (730mm)

Wcu seRIes (Two aperture)

waLL mOUNT SURFaCE HINGED CLamSHELL Lamps: CFL, biax, T8 Size: Nominal (7"x11") x17", (7"x11") x29", (7"x11") x53"

Wcunominal size1 (7"x11") x 17" 2 (7"x11") x 29" 4 (7"x11") x 53"

Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)9 12 Gauge CRS (painted)

Lamp Qty (uplight Component) 1 One2 TwoLamp Qty (Downlight Component)1 One 2 Two

*Not available as base material

Lamp type - 1’ nominal Length 13 13 watt Twin 13q 13 watt quad (3 Lamp max.) 26q 26 watt quad (3 Lamp max.) Lamp type - �’ nominal Length 17 F17T8 40b F40TT (3 Lamp max.) Lamp type - 4’ nominal Length 32 F32T8

Ballast type IS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsCO Convenience OutletEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL pack FS Single Fuse & Holder GFI Ground Fault Outlet Rp Recessed push Switch Sk Speaker Housing ExtensionTC Touch Control Switch TN pL Night Light (Lamp by others) DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterRGT Removable Gear TrayIH4 Full Length Internal Hinge

oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

DIMensIonal DaTa

Cross section mounting Holes

sPecIfIcaTIons

HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.

BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.

HInGe: Completely concealed drop slot piano type 2' internal hinge (1/2" knuckle/1/8" diam-eter pin) standard. pin secured to knuckle. Hinge welded to housing and mounts to base-plate via keyholes. See Options for full length internal hinge (IH4) (standard on 1' housing).

Lens: as specified - maximum thickness .625" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations.

InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.

PHotometrICs: Efficiency of wCU4-0/0-332-IS-1-120-1/9-1 = 51.4%. For additional photometric information, go to www.kenall.com.

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

48 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 49: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

7.00"(178mm)

10.25"(260mm)

2.00" Dia. Wiring Hole (4) .62" Mounting Holes

10.25"(260mm)

5.00"(127mm)

12.00"(305mm)

16.75" (425mm)

52.75"(1340mm)

48.00"(1219mm) 24.00"

(609mm)

2.00" Dia. Wiring Hole (6) .62" Mounting Holes

10.25"(260mm)

5.00"(127mm)

5.00"(127mm)

10.25"(260mm)

2.00" Dia. Wiring Hole (4) .62" Mounting Holes

24.00" (610mm)

28.75" (730mm)

WcH seRIes(one aperture)

WcHnominal size1 (7"x11") x 17" 2 (7"x11") x 29" 4 (7"x11") x 53"

Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)9 12 Gauge CRS (painted)

Lamp Qty 1 One2 Two

*Not available as base material

Lamp type - 1’ nominal Length 13 13 watt Twin 13q 13 watt quad 26q 26 watt quad Lamp type - �’ nominal Length 17 F17T8 40b F40TT Lamp type - 4’ nominal Length 32 F32T8

Ballast type IS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsCO Convenience OutletEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL pack FS Single Fuse & Holder GFI Ground Fault Outlet Rp Recessed push Switch Sk Speaker Housing ExtensionTC Touch Control Switch TN pL Night Light (Lamp by others) DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterRGT Removable Gear TrayIH4 Full Length Internal Hinge

waLL mOUNT SURFaCE HINGED CLamSHELL Lamps: CFL, biax, T8 Size: Nominal (7"x11") x17", (7"x11") x29", (7"x11") x53"

sPecIfIcaTIons

HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.

BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.

HInGe: Completely concealed drop slot piano type 2' internal hinge (1/2" knuckle/1/8" diam-eter pin) standard. pin secured to knuckle. Hinge welded to housing and mounts to base-plate via keyholes. See Options for full length internal hinge (IH4) (standard on 1' housing).

Lens: as specified - maximum thickness .625" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations.

InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.

PHotometrICs: Efficiency of wCH4-0/0-232-IS-1-120-1/9-1 = 45.6%. For additional photometric information, go to www.kenall.com.

DIMensIonal DaTa

Cross section mounting Holes

oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

4�10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 50: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

8.750"(222mm)

2.00" dia. Wiring hole (4) .62" mounting holes

10.25"(260mm)

5.00"(127mm)

12.00"(305mm)

16.75" (425mm)

5.00"(127mm)

10.25"(260mm)

2.00" dia. Wiring hole (4) .62" mounting holes

24.00" (610mm)

28.75" (730mm)

52.75"(1340mm)

48.00"(1219mm)

2.00" dia. Wiring hole (6) .62" mounting holes

10.25"(260mm)

5.00"(127mm)

24.00"(609mm)

10.25"(260mm)

8.750"(222mm)

2.00" dia. Wiring hole (4) .62" mounting holes

10.25"(260mm)

5.00"(127mm)

12.00"(305mm)

16.75" (425mm)

5.00"(127mm)

10.25"(260mm)

2.00" dia. Wiring hole (4) .62" mounting holes

24.00" (610mm)

28.75" (730mm)

52.75"(1340mm)

48.00"(1219mm)

2.00" dia. Wiring hole (6) .62" mounting holes

10.25"(260mm)

5.00"(127mm)

24.00"(609mm)

10.25"(260mm)

Wcbu bull nose series (Two aperture)

waLL mOUNT SURFaCE HINGED CLamSHELL Lamps: CFL, biax, T8Size: Nominal (9"x11") x17", (9"x11") x29", (9"x11") x53"

Wcbunominal size1 (9"x11") x 17" 2 (9"x11") x 29" 4 (9"x11") x 53"

Housing/Base material0 14 Gauge CRS (painted) 3 14 Gauge SS (painted) 6* 14 Gauge SS (brushed)

Lamp Qty (uplight Component) 1 One2 TwoLamp Qty (Downlight Component)1 One 2 Two

*Not available as base material

Lamp type - 1’ nominal Length 13 13 watt Twin 13q 13 watt quad (3 Lamp max.) 26q 26 watt quad (3 Lamp max.) Lamp type - �’ nominal Length 17 F17T8 40b F40TT (3 Lamp max.) Lamp type - 4’ nominal Length 32 F32T8

Ballast type IS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsCO Convenience OutletEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL pack FS Single Fuse & Holder GFI Ground Fault Outlet Rp Recessed push Switch Sk Speaker Housing ExtensionTC Touch Control Switch TN pL Night Light (Lamp by others) DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterRGT Removable Gear TrayIH4 Full Length Internal Hinge

DIMensIonal DaTa

Cross section mounting Holes

sPecIfIcaTIons

HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.

BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contra-band concealment and access. Embossed standoffs prevent distortion.

HInGe: Completely concealed drop slot piano type 2' internal hinge (1/2" knuckle/1/8" diam-eter pin) standard. pin secured to knuckle. Hinge welded to housing and mounts to base-plate via keyholes. See Options for full length internal hinge (IH4) (standard on 1' housing).

Lens: as specified - maximum thickness .625" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations.

InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.

PHotometrICs: Efficiency of wCbU4-0/0-332-IS-1-120-1/9-1 = 51.4%. For additional photometric information, go to www.kenall.com.

oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

�0 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 51: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

8.750"(222mm)

2.00" dia. Wiring hole (4) .62" mounting holes

10.25"(260mm)

5.00"(127mm)

12.00"(305mm)

16.75" (425mm)

5.00"(127mm)

10.25"(260mm)

2.00" dia. Wiring hole (4) .62" mounting holes

24.00" (610mm)

28.75" (730mm)

52.75"(1340mm)

48.00"(1219mm)

2.00" dia. Wiring hole (6) .62" mounting holes

10.25"(260mm)

5.00"(127mm)

24.00"(609mm)

10.25"(260mm)

8.750"(222mm)

2.00" dia. Wiring hole (4) .62" mounting holes

10.25"(260mm)

5.00"(127mm)

12.00"(305mm)

16.75" (425mm)

5.00"(127mm)

10.25"(260mm)

2.00" dia. Wiring hole (4) .62" mounting holes

24.00" (610mm)

28.75" (730mm)

52.75"(1340mm)

48.00"(1219mm)

2.00" dia. Wiring hole (6) .62" mounting holes

10.25"(260mm)

5.00"(127mm)

24.00"(609mm)

10.25"(260mm)

oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

nominal size1 (9"x11") x 17" 2 (9"x11") x 29" 4 (9"x11") x 53"

Housing/Base material0 14 Gauge CRS (painted) 3 14 Gauge SS (painted) 6* 14 Gauge SS (brushed)

Lamp Qty (Downlight Component)1 One 2 Two

*Not available as base material

Lamp type - 1’ nominal Length 13 13 watt Twin 13q 13 watt quad 26q 26 watt quad Lamp type - �’ nominal Length 17 F17T8 40b F40TT Lamp type - 4’ nominal Length 32 F32T8

Ballast type IS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsCO Convenience OutletEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL pack FS Single Fuse & Holder GFI Ground Fault Outlet Rp Recessed push Switch Sk Speaker Housing ExtensionTC Touch Control Switch TN pL Night Light (Lamp by others) DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterRGT Removable Gear TrayIH4 Full Length Internal Hinge

Wcb

Wcb bull nose series (one aperture)

waLL mOUNT SURFaCE HINGED CLamSHELL Lamps: CFL, biax, T8Size: Nominal (9"x11") x17", (9"x11") x29", (9"x11") x53"

sPecIfIcaTIons

HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.

BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.

HInGe: Completely concealed drop slot piano type 2' internal hinge (1/2" knuckle/1/8" diam-eter pin) standard. pin secured to knuckle. Hinge welded to housing and mounts to base-plate via keyholes. See Options for full length internal hinge (IH4) (standard on 1' housing).

Lens: as specified - maximum thickness .625" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations.

InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.

PHotometrICs: Efficiency of wCb4-0/0-332-IS-1-120-1/9-1 = 67.2%. For additional photometric information, go to www.kenall.com.

DIMensIonal DaTa

Cross section mounting Holes

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

�110�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 52: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

8.37"

13.37"(339mm)

(212mm)

2.00" dia. Wiring hole (4) .62" mounting holes

13.37"(339mm)

7.00"(178mm)

12.00"(305mm)

16.75" (425mm)

7.00"(178mm)

13.37"(339mm)

2.00" dia. Wiring hole (4) .62" mounting holes

24.00" (610mm)

28.75" (730mm)

52.75"(1340mm)

48.00"(1219mm) 24.00"

(609mm)

2.00" dia. Wiring hole (6) .62" mounting holes

13.37"(339mm)

7.00"(178mm)

WcT seRIes (one aperture)

waLL mOUNT SURFaCE HINGED CLamSHELL Lamps: CFL, biax, T8 Size: Nominal (9"x14") x17", (9"x14") x29", (9"x14") x53"

WcTnominal size1 (9"x14") x 17" 2 (9"x14") x 29" 4 (9"x14") x 53"

Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)9 12 Gauge CRS (painted)

Lamp Qty1 One 2 Two

*Not available as base material

Lamp type - 1’ nominal Length 13 13 watt Twin 13q 13 watt quad 26q 26 watt quad Lamp type - �’ nominal Length 17 F17T8 40b F40TT Lamp type - 4’ nominal Length 32 F32T8

Ballast type IS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsCO Convenience OutletEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL pack FS Single Fuse & Holder GFI Ground Fault Outlet Rp Recessed push Switch Sk Speaker Housing ExtensionTC Touch Control SwitchTN pL Night Light (Lamp by others) DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterRGT Removable Gear TrayIH4 Full Length Internal Hinge

sPecIfIcaTIons

HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.

BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.

HInGe: Completely concealed drop slot piano type 2' internal hinge (1/2" knuckle/1/8" diam-eter pin) standard. pin secured to knuckle. Hinge welded to housing and mounts to base-plate via keyholes. See Options for full length internal hinge (IH4 (standard on 1' housing)).

Lens: as specified - maximum thickness .625" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations.

InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.

PHotometrICs: Efficiency of wCT4-0/0-232-IS-1-120-1/b-1 = 47.2%. For additional photometric information, go to www.kenall.com.

DIMensIonal DaTa

Cross section mounting Holes

oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

�� 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 53: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

16.87"(428mm)

6.25"(159mm)

2.00" dia. Wiring hole (4) .62" mounting holes

26.50"(673mm)

19.00"(482mm)

11.00"(279mm)

16.87"(428mm)

2.00" dia. Wiring hole (6) .62" mounting holes

50.50"(1283mm)

21.00"(533mm)

11.00"(279mm)

16.87"(428mm)

WcD series (Two aperture)

waLL mOUNT SURFaCE HINGED CLamSHELL Lamps: biax, T8 Size: Nominal (7"x17") x27", (7"x17") x51"

WcDnominal size 2 (7"x17") x 27" 4 (7"x17") x 51"

Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)9 12 Gauge CRS (painted)

Lamp Qty 2 Two 3 Three

*Not available as base material

Lamp type - �’ nominal Length 17 F17T8 40b F40TT 55b F55TT Lamp type - 4’ nominal Length 32 F32T8

Ballast type IS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass N .750" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL pack FS Single Fuse & Holder Sk Speaker Housing ExtensionTC Touch Control SwitchTN pL Night Light (Lamp by others) DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterRGT Removable Gear Tray

sPecIfIcaTIons

HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.

BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.

HInGe: Completely concealed, spring loaded clevis style drop slot internal hinge spot welded to housing. mounts to baseplate via slots.

Lens: as specified - maximum thickness .875" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations.

InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.

PHotometrICs: Efficiency of wCD4-0/0-332-IS-1-120-1/7-1 = 53.2%. For additional photometric information, go to www.kenall.com.

oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

DIMensIonal DaTa

Cross section mounting Holes

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

�310�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 54: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

9.25"(235mm)

8.37"(212mm)

5.25"(133mm)

(1) 1/2" emt k.o.'s

(4) .50" mounting holes

5.25"(133mm)

3.50"(89mm)

10.00"(254mm)

13.50" (343mm)

4.62"(117mm)

(3) 1/2" EMT K.O.'S (4) .50" Mounting Holes

5.25"(133mm)

3.50"(89mm)

22.00"(559mm)

25.50" (648mm)

(3) 1/2" EMT K.O.'S (4) .50" Mounting Holes

5.25"(133mm)

3.50"(89mm)

23.00"(584mm)

46.00" (1168mm)

(2) Mounting Keyholes

49.50" (1257mm)

WDu seRIes (Two aperture)

waLL mOUNT SURFaCE HINGED DOOR Lamps: CFL, biax, T8Size: Nominal (6"x10") x14", (6"x10") x26", (6"x10") x50"

WDunominal size1 (6"x10") x 14" 2 (6"x10") x 26" 4 (6"x10") x 50"

Housing/Door material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 2 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)

Lamp Qty 1 One 2 Two

*Not available as base material

Lamp type - 1’ nominal Length 13 13 watt Twin 13q 13 watt quad 26q 26 watt quad Lamp type - �’ nominal Length 17 F17T8 40b F40TT (1 Lamp max.) Lamp type - 4’ nominal Length 32 F32T8

Ballast type IS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast

Ballast Qty 1 One

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL pack FS Single Fuse & Holder pS push Switch TC Touch Control SwitchTN pL Night Light (Lamp by others) DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterRGT Removable Gear TrayIH2 Internal HingeIH4 Full Length Internal Hinge

1

DIMensIonal DaTa

Cross section mounting Holes

oRDeRIng InfoRMaTIonseries nominal Hsg./Door Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

sPecIfIcaTIons

HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).

Door: One-piece die-formed prime grade ma-terial as specified - see ordering information.

HInGe: Staked and welded external piano type hinge (1/2" knuckle/1/8" diameter pin) standard. See Options for internal hinge (IH2) and full length (IH4) internal hinge.

Lens: as specified - maximum thickness .625" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations.

PHotometrICs: Efficiency of wDU4-0/0-232-IS-1-120-1/7-1 = 60.3%. For additional photometric information, go to www.kenall.com.

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

�4 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 55: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

9.25"(235mm)

8.37"(212mm)

5.25"(133mm)

(1) 1/2" emt k.o.'s

(4) .50" mounting holes

5.25"(133mm)

3.50"(89mm)

10.00"(254mm)

13.50" (343mm)

4.62"(117mm)

(3) 1/2" EMT K.O.'S (4) .50" Mounting Holes

5.25"(133mm)

3.50"(89mm)

22.00"(559mm)

25.50" (648mm)

(3) 1/2" EMT K.O.'S (4) .50" Mounting Holes

5.25"(133mm)

3.50"(89mm)

23.00"(584mm)

46.00" (1168mm)

(2) Mounting Keyholes

49.50" (1257mm)

WDD seRIes (one aperture)

waLL mOUNT SURFaCE HINGED DOOR Lamps: CFL, biax, T8 Size: Nominal (6"x10") x14", (6"x10") x26", (6"x10") x50"

sPecIfIcaTIons

HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).

Door: One-piece die-formed prime grade ma-terial as specified - see ordering information.

HInGe: Staked and welded external piano type hinge (1/2" knuckle/1/8" diameter pin) standard. See Options for internal hinge (IH2) and full length (IH4) internal hinge.

Lens: as specified - maximum thickness .625" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations.

PHotometrICs: Efficiency of wDD4-0/0-232-IS-1-120-1/7-1 = 45.9%. For additional photometric information, go to www.kenall.com.

nominal size1 (6"x10") x 14" 2 (6"x10") x 26" 4 (6"x10") x 50"

Housing/Door material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted)2 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)

Lamp Qty 1 One 2 Two

*Not available as base material

Lamp type - 1’ nominal Length 13 13 watt Twin 13q 13 watt quad 26q 26 watt quad Lamp type - �’ nominal Length 17 F17T8 40b F40TT (1 Lamp max.) Lamp type - 4’ nominal Length 32 F32T8

Ballast type IS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast

Ballast Qty 1 One

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL pack FS Single Fuse & Holder pS push Switch TC Touch Control SwitchTN pL Night Light (Lamp by others) DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterRGT Removable Gear TrayIH2 Internal HingeIH4 Full Length Internal Hinge

WDD

DIMensIonal DaTa

Cross section mounting Holes

oRDeRIng InfoRMaTIonseries nominal Hsg./Door Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

1

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

��10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 56: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

9.25"(235mm)

11.00"(279mm)

(3) 1/2" EMT K.O.'S

(6) .50" Mounting Holes

8.75"(222mm)

3.50"(89mm)

22.00"(559mm)

25.50" (648mm)

11.00"(279mm)

(7) .50" Mounting Holes

46.00"(1168mm)

49.50" (1257mm)

(3) 1/2" EMT K.O.'S (2) Mounting Keyholes

8.75"(222mm)

3.50"(89mm)11.00"

(279mm)

nominal size 2 (10"x11") x 26" 4 (10"x11") x 50"

Housing/Door material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 2 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6 14 Gauge SS (brushed) 7 16 Gauge SS (brushed)

Lamp Qty 1 One 2 Two

Lamp type - �’ nominal Length 17 F17T8 40b F40TT (1 Lamp max.) Lamp type - 4’ nominal Length 32 F32T8

Ballast type IS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast

Ballast Qty 1 One

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL pack FS Single Fuse & Holder pS push Switch TC Touch Control SwitchTN pL Night Light (Lamp by others) DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterRGT Removable Gear TrayIH2 Internal HingeIH4 Full Length Internal Hinge

WDs seRIes (one aperture)

waLL mOUNT bOOk SHELF HINGED DOOR Lamps: biax, T8 Size: Nominal (10"x11") x26", (10"x11") x51"

WDs

sPecIfIcaTIons

HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).

Door: One-piece die-formed prime grade ma-terial as specified - see ordering information.

HInGe: Staked and welded external piano type hinge (1/2" knuckle/1/8" diameter pin) standard. See Options for internal hinge (IH2) and full length (IH4) internal hinge.

Lens: as specified - maximum thickness .625" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations.

PHotometrICs: Efficiency of wDS4-0/0-232-IS-1-120-1/7-1 = 45.9%. For additional photometric information, go to www.kenall.com.

DIMensIonal DaTa

Cross section mounting Holes

oRDeRIng InfoRMaTIonseries nominal Hsg./Door Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

1

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

�6 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 57: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

1.06"(27mm)

8.62"(219mm)

10.08"(256mm)

5.12"(130mm)

2.56"(65mm)

6.50"(165mm)

(2) .31" dia mtg. holes

(3) 1/2" emt holes

5.12"(130mm) 6.50"

(165mm)

6.50"(165mm)

3.50"(89mm)

RfW seRIes (step light)

waLL mOUNT RECESSED Lamps: CFL Size: Nominal 6"x9"

sPecIfIcaTIons

HousInG: Die-formed 14-gauge prime grade material. Corners continuously seam welded and smooth with no post grinding (TIG).

Door: One-piece die-formed 14-gauge prime grade material as specified - see ordering in-formation. Corners continuously seam welded and smooth with no post grinding (TIG).

Lens: as specified - maximum thickness .375" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “L” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: One 9-watt twin tube compact fluo-rescent lamp (by others).

BALLAst: Type as specified - see ordering information. all ballasts UL listed class p. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL 1570 listed for damp location applications.

PHotometrICs: For photometric informa-tion, go to www.kenall.com.

RfWnominal sizea 6" x 9"

Housing/Door material0 14 Gauge CRS (painted)

Lamp Qty 1 One

Lamp type 7 7 watt Twin9 9 watt Twin13q 13 watt quad

Ballast type NpF Normal power Factor pFC power Factor Corrected RS Rapid Start Electronic <10% THD (13q only)

Ballast Qty 1 One

Voltage120 120 volts277 277 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

options FS Single Fuse & Holder

10

DIMensIonal DaTa

Cross section mounting Holes

oRDeRIng InfoRMaTIonseries nominal Hsg./Door Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

1

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

�710�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

a

Page 58: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

9.00"(229mm)

9.00"(229mm)

6.00"(152mm)

3.50"(89mm)

2.00" dia. Wiring k.o. (4) .62" mounting holes

12.00"(305mm)

8.00"(203mm)

6.00"(152mm)

26.00"(660mm)

20.00"(508mm)

3.50"(89mm)

2.00" dia. Wiring k.o. (4) .62" mounting holes

50.00"(1270mm)

6.00"(152mm)

21.937"(557mm)

3.50"(89mm)

2.00" dia. Wiring k.o. (6) .62" mounting holes

43.87"(1114mm)

cc seRIes

ccnominal size1 9" x 12" 2 9" x 24" 4 9" x 48"

Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)9 12 Gauge CRS (painted)

lamp qty 1 One 2 Two 3 Three

* Not available as base material• Not available with F54T5HO

Lamp type - 1’ nominal Length 13 13 watt Twin 13q 13 watt quad (2 Lamp max.) 26q 26 watt quad (2 Lamp max.) Lamp type - �’ nominal Length 17 F17T8 40b F40TT Lamp type - 4’ nominal Length 28 F28T5 32 F32T854 F54T5HO

Ballast type IS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8, T5, T5HO) Sb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass N .750" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsEL• Standard Lumen EL pack pEL• High Lumen EL pack SEL• Specified EL pack FS Single Fuse & Holder Sk Speaker Housing ExtensionTN pL Night Light (Lamp by others) (2 Lamp max.) DLN LED Night Light w/Light Level Control Uv Ultraviolet Filter wL wet Location ListedRGT Removable Gear TrayIH4 Full Length Internal Hinge

sPecIfIcaTIons

HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.

BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.

HInGe: Continuous heavy gauge piano type 2' internal hinge (1/2" knuckle/1/8" diameter pin) standard. pin secured to knuckle. Hinge welded to housing and mounts to baseplate via keyholes. See Options for full length inter-nal hinge (IH4) (standard on 1' housing).

Lens: as specified - maximum thickness .875" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions.

InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.

PHotometrICs: Efficiency of CC4-0/0-232-IS-1-120-1/b-1 = 49%. For additional photo-metric information, go to www.kenall.com.

oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

DIMensIonal DaTa

Cross section mounting Holes

CORNER mOUNT SURFaCE HINGED CLamSHELL Lamps: CFL, biax, T8, T5, T5HO Size: Nominal 9"x12", 9"x24", 9"x48"

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

�8 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 59: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

8.00"(203mm)

8.00"(203mm)

2.00" dia. Wiring k.o. (4) .62" mounting holes

12.00" (305mm)

6.43"(163mm)

2.75"(70mm)

8.00"(203mm)

8.00"(203mm)

2.00" dia. Wiring k.o. (4) .62" mounting holes

12.00" (305mm)

6.43"(163mm)

2.75"(70mm)

8.00"(203mm)

8.00"(203mm)

49.37"(1254mm)

43.50"(1105mm)

6.43"(163mm)

2.00" dia. Wiring k.o. (6) .62" mounting holes

21.75"(552mm)

8.00"(203mm)

2.75"(70mm)

cD seRIes CORNER mOUNT SURFaCE HINGED DOOR Lamps: CFL, biax, T8, T5, T5HO Size: Nominal 8"x12", 8"x24", 8"x48"

sPecIfIcaTIons

HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).

Door: One-piece die-formed prime grade ma-terial as specified – see ordering information.

HInGe: Continuous heavy gauge piano type 2' internal hinge (1/2" knuckle/1/8" diameter pin) standard. pin secured to knuckle. Hinge welded to door and secured to housing. See Options for full length internal hinge (IH4) (standard on 1' housing).

Lens: as specified - maximum thickness .625" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions.

PHotometrICs: Efficiency of CD4-0/0-232-IS-1-120-1/b-1 = 49%. For additional photo-metric information, go to www.kenall.com.

cDnominal size1 8" x 12" 2 8" x 24" 4 8" x 48"

Housing/Door material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 2* 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6 14 Gauge SS (brushed) 7 16 Gauge SS (brushed)

Lamp Qty 1 One 2 Two 3 Three

*Not available as Door material

Lamp type - 1’ nominal Length 13 13 watt Twin 13q 13 watt quad (2 Lamp max.) 26q 26 watt quad (2 Lamp max.) Lamp type - �’ nominal Length 17 F17T8 40b F40TT Lamp type - 4’ nominal Length 28 F28T532 F32T8 54 F54T5HO

Ballast type IS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8, T5, T5HO) Sb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsEL• Standard Lumen EL pack pEL• High Lumen EL pack SEL• Specified EL pack FS Single Fuse & Holder kO 1/2" EmT knockout Sk Speaker Housing ExtensionTN pL Night Light (Lamp by others) (Two Lamp max.) DLN LED Night Light w/Light Level Control Uv Ultraviolet Filter wL wet Location ListedRGT Removable Gear TrayIH4 Full Length Internal Hinge

• Not available with F54T5HO

oRDeRIng InfoRMaTIonseries nominal Hsg./Door Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

DIMensIonal DaTa

Cross section mounting Holes

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

��10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 60: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

4.00"(102mm)

13.00"(330mm)

2.00" dia. Wiring hole (4) .62" mounting holes

13.50"(343mm)

10.00"(254mm)

7.00"(178mm)

13.00"(330mm)

ssqa seRIes

ssq

CEILING mOUNT SURFaCE HINGED CLamSHELL Lamps: CFL Size: Nominal 12"X12"

sPecIfIcaTIons

HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.

BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.

HInGe: Completely concealed drop slot piano type internal hinge (1/2" knuckle/1/8" diameter pin). pin secured to knuckle. Hinge welded to housing and mounts to either side of base-plate via keyholes.

Lens: as specified - maximum thickness .875" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. all lamps supplied by others.

BALLAst: Type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/ballast tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions.

PHotometrICs: Efficiency of SSqa-0/0-213-mb-1-120-1/9-1 = 40.5%. For additional photometric information, go to www.kenall.com.

nominal sizea 12" x 12"

Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)9 12 Gauge CRS (painted)

Lamp Quantity 1 One2 Two3 Three (13 watt Twin only)

*Not available as base material

Lamp type 13 13 watt Twin 13E 13 watt (4) pin Twin 13q 13 watt quad 26q 26 watt quad

Ballast type RS Rapid Start Electronic <10% THDSb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass N .750" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL pack FS Single Fuse & Holder TN pL Night Light (5,7,9 watt Only) DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterwL wet Location ListedRGT Removable Gear Tray

DIMensIonal DaTa

Cross section mounting Holes

oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer

a

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

60 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 61: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

6.00"(146mm)

13.50"(343mm) 2.00" dia. Wiring hole

(4) .62" mounting holes

8.00"(203mm)

13.50"(343mm)

oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty † Inner/outer

sqca seRIes CEILING mOUNT SURFaCE HINGED CLamSHELL Lamps: CFL, HID, Incandescent Size: Nominal 13"x13"

sPecIfIcaTIons

HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.

BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.

HInGe: Completely concealed drop slot piano type internal hinge (1/2" knuckle/1/8" diameter pin). pin secured to knuckle. Hinge welded to housing and mounts to baseplate via keyholes.

Lens: as specified - maximum thickness .875" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. all lamps supplied by others.

BALLAst: Type as specified - see ordering information. all fluorescent ballasts UL listed class p. all HID ballasts UL listed HpF type. See options listing for alternates. Optional re-movable reflector/lamp/ballast tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions.

PHotometrICs: Efficiency of SqCa-0/0-113-mb-1-120-1/G-1 = 55.6%. For additional photometric information, go to www.kenall.com.

sqcnominal sizea 13" x 13"

Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)9 12 Gauge CRS (painted)

Lamp Quantity 1 One (INC, 2D, & HID only)2 Two3 Three (13 watt Twin only)

• Fluorescent Only* Not available as base material† Glass interior lens required

Lamp type 13 13 watt Twin 13E 13 watt (4) pin Twin 13q 13 watt quad 26q 26 watt quad28D 28 watt 2D 38D 38 watt 2D 50S† 50 watt HpS 70S† 70 watt HpS70m† 70 watt mH 150I† 150 watt Incandescent

Ballast type - Fluorescent only RS Rapid Start Electronic <10% THDBallast type - HID only See SpecificationsSb Specified ballast

Ballast Qty 1 One 2 Two (Fluorescent only)

Voltage120 120 volts277 277 volts347 347 volts DT 120/277 volts (HID only)

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass N .750" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsEL• Standard Lumen EL packpEL• High Lumen EL pack SEL• Specified EL pack FS Single Fuse & Holder qR Hot restrike system for maximum 100-watt DC bayonet quartz Lamp qS quartz Socket Only TN pL Night Light (5,7,9,13 watt Only)DLN LED Night Light w/Light Level Control wL wet Location ListedRGT Removable Gear Tray (Fluorescent only)

DIMensIonal DaTa

Cross section mounting Holes

a

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

6110�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 62: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

6.50"(165mm)

12.50"(317mm)

2.00" dia. Wiring hole (4) .62" mounting holes

6.00" sQ.(152mm)

12.50" sQ.(317mm)

oRDeRIng InfoRMaTIonseries nominal Hsg./Door Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty † Inner/outer

sqD

sqDa seRIes CEILING mOUNT SURFaCE HINGED DOOR Lamps: CFL, HID, Incandescent Size: Nominal 12"x12"

sPecIfIcaTIons

HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).

Door: One-piece die-formed prime grade ma-terial as specified - see ordering information.

HInGe: Staked and welded external piano type hinge (1/2" knuckle/1/8" diameter pin) standard. See Options for full length (IH4) internal hinge.

Lens: as specified - maximum thickness .625" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to door via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: Type as specified - see ordering information. all fluorescent ballasts UL listed class p. all HID ballasts UL listed HpF type. See options listing for alternates. Optional re-movable reflector/lamp/ballast tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions.

PHotometrICs: Efficiency of SqDa-0/0-113-mb-1-120-1/G-1 = 55.6%. For additional photometric information, go to www.kenall.com.

nominal sizea 12" x 12"

Housing/Door material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 2* 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6 14 Gauge SS (brushed) 7 16 Gauge SS (brushed)

Lamp Quantity 1 One (INC, 2D, & HID only)2 Two3 Three (13 watt Twin only)

*Not available as Door material• Fluorescent Only† Glass interior lens required

Lamp type 13 13 watt Twin 13E 13 watt (4) pin Twin 13q 13 watt quad 26q 26 watt quad28D 28 watt 2D 38D 38 watt 2D 50S† 50 watt HpS 70S† 70 watt HpS70m† 70 watt mH 150I† 150 watt Incandescent

Ballast type - Fluorescent only RS Rapid Start Electronic <10% THDBallast type - HID onlySee SpecificationsSb Specified ballast

Ballast Qty 1 One 2 Two (Fluorescent only)

Voltage120 120 volts277 277 volts347 347 volts DT 120/277 volts (HID only)

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsEL• Standard Lumen EL packpEL• High Lumen EL pack SEL• Specified EL pack FS Single Fuse & Holder qR Hot restrike system for maximum 100-watt DC bayonet quartz Lamp qS quartz Socket Only TN pL Night Light (5,7,9,13 watt Only)DLN LED Night Light w/Light Level Control wL wet Location ListedRGT Removable Gear Tray (Fluorescent only)IH4 Full Length Internal Hinge

DIMensIonal DaTa

Cross section mounting Holes

a

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

6� 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 63: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

8.00"(203mm)

16.50"(419mm)

2.00" dia. Wiring hole (4) .62" mounting holes

9.00" sQ.(229mm)

16.50" sQ.(419mm)

oRDeRIng InfoRMaTIonseries nominal Hsg./Door Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty † Inner/outer

sqDb seRIes

nominal sizeb 16" x 16"

Housing/Door material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 2* 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6 14 Gauge SS (brushed) 7 16 Gauge SS (brushed)

Lamp Quantity 1 One (INC, 2D, & HID only)2 Two3 Three

* Not available as Door material• Fluorescent Only† Glass interior lens required

Lamp type 13 13 watt Twin 13E 13 watt (4) pin Twin 13q 13 watt quad 26q 26 watt quad28D 28 watt 2D 38D 38 watt 2D 50S† 50 watt HpS 50m† 50 watt mH 70S† 70 watt HpS70m† 70 watt mH100S† 100 watt HpS 100m† 100 watt mH 150S† 150 watt HpS 175m† 175 watt mH 150I† 150 watt Incandescent

Ballast type - Fluorescent only RS Rapid Start Electronic <10% THDBallast type - HID onlySee SpecificationsSb Specified ballast

Ballast Qty 1 One 2 Two (Fluorescent only)

Voltage120 120 volts277 277 volts347 347 volts DT 120/277 volts (HID only)

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass Dp Drop Dish polycarbonate

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsEL• Standard Lumen EL packpEL• High Lumen EL pack SEL• Specified EL pack FS Single Fuse & Holder qR Hot restrike system for maximum 100-watt DC bayonet quartz Lamp qS quartz Socket Only wL wet Location ListedRGT Removable Gear Tray (Fluorescent only)IH4 Full Length Internal Hinge

CEILING mOUNT SURFaCE HINGED DOOR Lamps: CFL, HID, Incandescent Size: Nominal 16"x16"

bsqD

sPecIfIcaTIons

HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).

Door: One-piece die-formed prime grade ma-terial as specified - see ordering information.

HInGe: Staked and welded external piano type hinge (1/2" knuckle/1/8" diameter pin) standard. See Options for full length (IH4) internal hinge.

Lens: as specified - maximum thickness .625" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers. medium base socket for incandescent and HID applications.

BALLAst: Type as specified - see ordering information. all fluorescent ballasts UL listed class p. all HID ballasts UL listed HpF type. See options listing for alternates. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions.

PHotometrICs: Efficiency of SqDb-1/1-175m-1-120-a/1-1 = 53.8%. For additional photometric information, go to www.kenall.com.

DIMensIonal DaTa

Cross section mounting Holes

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

6310�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 64: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

10.00"(254mm)

20.50"(521mm)

2.00" dia. Wiring hole (4) .62" mounting holes

13.00" sQ.(330mm) 20.50" sQ.

(521mm)

sqDc seRIes CEILING mOUNT SURFaCE HINGED DOOR Lamps: HID, Induction Size: Nominal 20"x20"

sPecIfIcaTIons

HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).

Door: One-piece die-formed prime grade ma-terial as specified - see ordering information.

HInGe: Staked and welded external piano type hinge (1/2" knuckle/1/8" diameter pin) standard. See Options for full length (IH4) internal hinge.

Lens: as specified - maximum thickness .625" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to door via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers. mogul base socket.

BALLAst: UL listed HpF type 150 watt induction fluorescent system (150IND) UL listed and approved for use with Icetron™ lamp/ballast by Osram Sylvania. See options for alternates. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions.

PHotometrICs: Efficiency of SqDC-1/1-250m-1-120-a/1-1 = 53.4%. For additional photometric information, go to www.kenall.com.

sqDnominal sizeC 20" x 20"

Housing/Door material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 2** 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6 14 Gauge SS (brushed) 7 16 Gauge SS (brushed)

Lamp Quantity 1 One

**Not available as Door material† Glass interior lens required* product UL listed and approved for use with Icetron™ lamp/ballast by Osram Sylvania.

Lamp type 100S† 100 watt HpS 150S† 150 watt HpS 175m† 175 watt mH 250S† 250 watt HpS 250m† 250 watt mH 150IND* 150 watt Induction Fluorescent

Ballast type See SpecificationsSb Specified ballast

Ballast Qty 1 One

Voltage120 120 volts277 277 volts347 347 volts DT 120/277 volts (HID only) qT 120/208/240/277 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsFS Single Fuse & Holder qR Hot restrike system for maximum 100-watt DC bayonet quartz Lamp qS quartz Socket Only wL wet Location ListedIH4 Full Length Internal Hinge

c 1 na 1

DIMensIonal DaTa

Cross section mounting Holes

oRDeRIng InfoRMaTIonseries nominal Hsg./Door Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty † Inner/outer

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

64 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 65: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

12.00"(305mm)

24.50"(622mm) 2.00" dia. Wiring hole

(4) .62" mounting holes

17.00" sQ.(432mm) 24.50" sQ.

(622mm)

sqDD seRIes CEILING mOUNT SURFaCE HINGED DOOR Lamps: HID Size: Nominal 24"x24"

sPecIfIcaTIons

HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).

Door: One-piece die-formed prime grade ma-terial as specified - see ordering information.

HInGe: Staked and welded external piano type hinge (1/2" knuckle/1/8" diameter pin) standard. See Options for full length (IH4) internal hinge.

Lens: as specified - maximum thickness .625" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to door via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers. mogul base socket.

BALLAst: UL listed HpF type. See options for alternates. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions.

PHotometrICs: Efficiency of SqDD-1/1-400m-DT-a/1-1 = 56.9%. For additional photo-metric information, go to www.kenall.com.

sqD Dnominal sizeD 24" x 24"

Housing/Door material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 2* 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6 14 Gauge SS (brushed) 7 16 Gauge SS (brushed)

Lamp Quantity 1 One

* Not available as Door material† Glass interior lens required

Lamp type 150S† 150 watt HpS 175m† 175 watt mH 250S † 250 watt HpS 250m† 250 watt mH400S† 400 watt HpS 400m† 400 watt mH

Ballast type See SpecificationsSb Specified ballast

Ballast Qty 1 One

Voltage120 120 volts277 277 volts347 347 volts DT 120/277 volts qT 120/208/240/277 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsFS Single Fuse & Holder qR Hot restrike system for maximum 100-watt DC bayonet quartz Lamp qS quartz Socket Only wL wet Location ListedIH4 Full Length Internal Hinge

oRDeRIng InfoRMaTIonseries nominal Hsg./Door Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty † Inner/outer

na 11

DIMensIonal DaTa

Cross section mounting Holes

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

6�10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 66: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

13.50"(343mm)

5.00"(127mm)

(3) 1/2" emt k.o.'s (4) 1.25" x .75 obrounds

8.00"(203mm)

12.00"(305mm)

Rqca seRIes CEILING mOUNT RECESSED HINGED DOORFRamE Lamps: CFL, HID, Incandescent Size: Nominal 12"x12"

sPecIfIcaTIons

HousInG: Die-formed prime grade mate-rial as specified - see ordering information. Lapped and spot welded construction.

Door: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).

HInGe: Completely concealed spring loaded drop slot piano type internal hinge (1/2" knuck-le/1/8" diameter pin). pin secured to knuckle. Hinge welded to door and mounts to either side of housing via keyholes.

Lens: as specified - maximum thickness .625" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. all lamps supplied by others. medium base socket on incandescent and HID lamps.

BALLAst: Type as specified - see ordering information. all fluorescent ballasts UL listed class p. all HID ballasts UL listed HpF type. See options listing for alternates. Optional re-movable reflector/lamp/ballast tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. Non IC rated. See security detention Recessed Installation Technical Data Sheet.

PHotometrICs: Efficiency of RqCa-0/0-113-mb-1-120-1/G-1 = 55.6%. For additional photometric information, go to www.kenall.com.

Rqcnominal sizea 12" x 12"

Door/Housing material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 2* 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6** 14 Gauge SS (brushed) 7** 16 Gauge SS (brushed)9** 12 Gauge CRS (painted)

Lamp Quantity 1 One (INC, 2D, & HID only)2 Two3 Three (13 watt Twin only)

*Not available as Door material** Not available with Hsg. material† Glass interior lens required• Fluorescent Only

Lamp type 13 13 watt Twin 13E 13 watt (4) pin Twin 13q 13 watt quad 26q 26 watt quad28D 28 watt 2D 38D 38 watt 2D 50S† 50 watt HpS 70S† 70 watt HpS70m† 70 watt mH150I† 150 watt Incandescent

Ballast type - Fluorescent only RS Rapid Start Electronic <10% THDBallast type - HID onlySee SpecificationsSb Specified ballast

Ballast Qty 1 One 2 Two (Fluorescent only)

Voltage120 120 volts277 277 volts347 347 volts DT 120/277 volts (HID only)

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsEL• Standard Lumen EL packpEL• High Lumen EL pack SEL• Specified EL pack FS Single Fuse & Holder qR Hot restrike system for maximum 100-watt DC bayonet quartz Lamp qS quartz Socket Only TN pL Night Light (5,7,9,13 watt max.)DLN LED Night Light w/Light Level Control wL wet Location Listed pF plaster Frame CC Cross Channels YF Yoke Frame mounting kitRGT Removable Gear Tray (Fluorescent Only)

oRDeRIng InfoRMaTIonseries nominal Door/Hsg. Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty †Inner/outer

DIMensIonal DaTa

Cross section mounting Holes

a

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

66 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 67: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

16.50"(419mm)

7.50"(190mm)

(2) 1/2" emt k.o.'s (4) .62" dia. mounting holes

9.00" sQ.(229mm)

15.75" sQ.(400mm)

oRDeRIng InfoRMaTIonseries nominal Door/Hsg. Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty † Inner/outer

sPecIfIcaTIons

HousInG: Die-formed prime grade mate-rial as specified - see ordering information. Lapped and spot welded construction.

Door: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).

HInGe: Completely concealed spring loaded drop slot piano type internal hinge (1/2" knuck-le/1/8" diameter pin). pin secured to knuckle. Hinge welded to door and mounts to either side of housing via keyholes.

Lens: as specified - maximum thickness .625" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to door via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers. medium base socket on incandescent and HID lamps.

BALLAst: Type as specified - see ordering information. all fluorescent ballasts UL listed class p. all HID ballasts UL listed HpF type. See options listing for alternates. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. Non IC rated. See security detention Recessed Technical Data Sheet. PHotometrICs: Efficiency of RqCb-1/1-175m-1-120-a/4-1 = 47.9%. For additional photometric information, go to www.kenall.com.

Rqcb seRIes CEILING mOUNT RECESSED HINGED DOORFRamE Lamps: CFL, HID, Incandescent Size: Nominal 16"x16"

nominal sizeb 16" x 16"

Door/Housing material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 2* 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6** 14 Gauge SS (brushed) 7** 16 Gauge SS (brushed) 9** 12 Gauge CRS (painted)

Lamp Quantity 1 One (INC, 2D, & HID only)2 Two3 Three

*Not available as Door material** Not available as Hsg. material† Glass interior lens required• Fluorescent Only

Lamp type 13 13 watt Twin 13E 13 watt (4) pin Twin 13q 13 watt quad 26q 26 watt quad28D 28 watt 2D 38D 38 watt 2D 50S† 50 watt HpS 50m† 50 watt mH 70S† 70 watt HpS70m† 70 watt mH100S† 100 watt HpS 100m† 100 watt mH 150S† 150 watt HpS 150I† 150 watt Incandescent

Ballast type - Fluorescent only RS Rapid Start Electronic <10% THDBallast type - HID onlySee SpecificationsSb Specified ballast

Ballast Qty 1 One 2 Two (Fluorescent only)

Voltage120 120 volts277 277 volts347 347 volts DT 120/277 volts (HID only)

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass Dp Drop Dish polycarbonate

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsEL• Standard Lumen EL packpEL• High Lumen EL pack SEL• Specified EL pack FS Single Fuse & Holder qR Hot restrike system for maximum 100-watt DC bayonet quartz Lamp qS quartz Socket Only wL wet Location Listed pF plaster Frame CC Cross Channels YF Yoke Frame mounting kit

Rqc b

DIMensIonal DaTa

Cross section mounting Holes

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

6710�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 68: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

(610mm)24.00"

12.25"(311mm)

(2) 1/2" EMT K.O.'S (4) .62" Dia. Mounting Holes

17.00" SQ.(432mm)

23.25" SQ.(590mm)

RqcD seRIes CEILING mOUNT RECESSED HINGED DOORFRamE Lamps: HID Size: Nominal 24"x24"

sPecIfIcaTIons

HousInG: Die-formed prime grade mate-rial as specified - see ordering information. Lapped and spot welded construction.

Door: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).

HInGe: Completely concealed spring loaded drop slot piano type internal hinge (1/2" knuck-le/1/8" diameter pin). pin secured to knuckle. Hinge welded to door and mounts to either side of housing via keyholes.

Lens: as specified - maximum thickness .625" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to door via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers. mogul base socket.

BALLAst: HID ballast UL listed HpF type. See options listing for alternates. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. Non IC rated. See security detention Recessed Installation Technical Data Sheet. PHotometrICs: Efficiency of RqCD-1/1-400m-DT-a/1-1 = 54.5%. For additional photo-metric information, go to www.kenall.com.

Rqc Dnominal sizeD 24" x 24"

Door/Housing Material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 2* 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6** 14 Gauge SS (brushed) 7** 16 Gauge SS (brushed) 9** 12 Gauge CRS (painted)

Lamp Quantity 1 One

*Not available as Door material** Not available with Hsg. material† Glass interior lens required

Lamp type 150S† 150 watt HpS 175m† 175 watt mH 250S† 250 watt HpS 250m† 250 watt mH320m† 320 watt mH400S† 400 watt HpS 400m† 400 watt mH

Ballast type See SpecificationsSb Specified ballast

Ballast Qty 1 One

Voltage120 120 volts277 277 volts347 347 volts DT 120/277 volts qT 120/208/240/277 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsFS Single Fuse & Holder qR Hot restrike system for maximum 100-watt DC bayonet quartz Lamp qS quartz Socket Only wL wet Location Listed pF plaster Frame CC Cross Channels YF Yoke Frame mounting kit

oRDeRIng InfoRMaTIonseries nominal Door/Hsg. Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty † Inner/outer

na 11

DIMensIonal DaTa

Cross section mounting Holes

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

68 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 69: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

16.00"(406mm)

5.00"(127mm)

13.50"(343mm)

(3) 1/2" emt k.o.'s

16.00"(406mm)

12.00"(305mm)

RqPa seRIes CEILING mOUNT RECESSED HINGED DOORFRamE Lamps: CFL, Incandescent Size: Nominal 12"X12"

sPecIfIcaTIons

HousInG: Die-formed 16 gauge galvanized prime grade material. Lapped and spot welded construction.

Door: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).

HInGe: Completely concealed spring loaded drop slot piano type internal hinge (1/2" knuck-le/1/8" diameter pin). pin secured to knuckle. Hinge welded to door and mounts to either side of housing via keyholes.

Lens: as specified - maximum thickness .625" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to door via thru-studs.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: Type as specified - see ordering information. all fluorescent ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. Non IC rated.

PHotometrICs: Efficiency of Rqpa-0/0-113-mb-1-120-1/G-1 = 55.6%. For additional photometric information, go to www.kenall.com.

RqP anominal sizea 12" x 12"

Door/Housing material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6 14 Gauge SS (brushed) 7 16 Gauge SS (brushed)9 12 Gauge CRS (painted)

Lamp Quantity 1 One (INC & 2D only)2 Two3 Three (13 watt Twin only)

† Glass interior lens required• Fluorescent Only

Lamp type 13 13 watt Twin 13E 13 watt (4) pin Twin 13q 13 watt quad 26q 26 watt quad 28D 28 watt 2D 38D 38 watt 2D 150I† 150 watt Incandescent

Ballast type RS Rapid Start Electronic <10% THDSb Specified ballast

Ballast Qty 1 One 2 Two

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsEL• Standard Lumen EL packpEL• High Lumen EL pack SEL• Specified EL pack FS Single Fuse & Holder TN pL Night Light (5,7,9 watt Only)DLN LED Night Light w/Light Level Control wL wet Location ListedRGT Removable Gear Tray (Fluorescent Only)

oRDeRIng InfoRMaTIonseries nominal Door/Hsg. Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty † Inner/outer

na

DIMensIonal DaTa

Cross section mounting Holes

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

6�10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 70: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

5.00"(127mm)

16.25"(413mm)

19.25"(489mm)

15.00"(381mm)

MOUNTING FLANGE

HOUSING

16.12"(409mm)

OUTER FLANGE

RqPb seRIes CEILING mOUNT RECESSED SECURED DOORFRamE Lamps: CFL, Incandescent Size: Nominal 16"x16"

sPecIfIcaTIons

HousInG: Die-formed 16 gauge galvanized prime grade material. Lapped and spot welded construction.

Door: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Door secured to housing with stainless steel aircraft cables.

Lens: as specified - maximum thickness .625" - see ordering information.

Lens retentIon: vertically adjustable con-tinuous “L” brackets - prime grade material. Secured to door via screws.

FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.

BALLAst: Type as specified - see ordering information. all fluorescent ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.

LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. Non IC rated.

PHotometrICs: Efficiency of Rqpb-1/1-213-mb-1-120-1/9-1 = 53.1%. For additional photometric information, go to www.kenall.com.

RqP bnominal sizeb 16" x 16"

Door/Housing material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6 14 Gauge SS (brushed) 7 16 Gauge SS (brushed) 9 12 Gauge CRS (painted)

Lamp Quantity 1 One (INC & 2D only)2 Two3 Three (13 watt Twin only)

† Glass interior lens required• Fluorescent Only

Lamp type 13 13 watt Twin 13E 13 watt (4) pin Twin 13q 13 watt quad 26q 26 watt quad28D 28 watt 2D 38D 38 watt 2D 150I† 150 watt Incandescent

Ballast type - Fluorescent only RS Rapid Start Electronic <10% THDSb Specified ballast

Ballast Qty 1 One 2 Two (Fluorescent only)

Voltage120 120 volts277 277 volts347 347 volts

Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass Dp Drop Dish polycarbonate

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsEL• Standard Lumen EL packpEL• High Lumen EL pack SEL• Specified EL pack FS Single Fuse & Holder wL wet Location ListedRGT Removable Gear Tray (Fluorescent Only)

oRDeRIng InfoRMaTIonseries nominal Door/Hsg. Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty †Inner/outer

na

DIMensIonal DaTa

Cross section mounting Holes

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

70 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 71: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

DuplexReceptacle

5.50"(139mm)

3.74"(95mm)

5.54"(141mm)

7.34"(186mm)

.5"(13mm)

GFI DuplexReceptacle

Switch

TV/TelephoneOutlet

Touch Control(Remote Device)

Blank

Single Gang Double Gang Triple Gang

Wall Plate

ElectricalDevice

Backplate

J-Box

Wall Plate

ElectricalDevice

Backplate

J-Box

WsP/WPP seRIes waLL pLaTES SURFaCE aND CONCRETE pOUR

sPecIfIcaTIons

CoVer PLAte: One-piece heavy gauge prime grade material as specified - see ordering information. Die formed with four countersunk holes for security fasteners.

BACkPLAte: prime grade 11-gauge galva-nized steel.

FAsteners: Flat head pOSIGRIp™ hardened security screws. See Ordering Information for additional options.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. See ordering information for additional finish options.

LIstInGs: UL listed.

Electrical devices and junction boxes supplies by others. Consult factory for larger size/”Gang plates”.

oRDeRIng InfoRMaTIonseries material Gang size Devices Fasteners options Accessories

wSp wall Surface mount plate wpp wall pour-in-place plate

material a 10 Gauge CRS (painted) 0 14 Gauge CRS (painted) 3 14 Gauge SS (painted) 6 14 Gauge SS (brushed)

Gang size 1 Single Gang (1 Device max.) 2 Double Gang (2 Devices max.) 3 Triple Gang (3 Devices max.)

Devices b blank D Duplex ReceptacleG GFCI Duplex ReceptacleN Single Round Receptacle S Switch T Tv/Telephone Outlet (specify hole size)TC Touch Control (Consult Factory)

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsIvY Ivory Color

AccessoriesD-0418 pOSIGRIp™ ScrewdriverD-0377 allen Head Screwdriver

DIMensIonal DaTa Devices

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

7110�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 72: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

2.78"(70mm)

3.07"(78mm)

8.44"(214mm)

7.00"(178mm)

14.53"(369mm)

4.00"(102mm)

4.00"(102mm)

11.96"(304mm)

11.96"(304mm) 11.40"

(290mm)5.44"(138mm)

4.00"(102mm)

5.44"(138mm)5.44"

(138mm)

5.44"(138mm)

(4) 1/2" EMT KOs (4) .31" Dia. KOs

Top Mount Back Mount End Mount

Top Mount End Mount

(4) .31" Dia. KOs

7.00"(178mm)

14.53"(369mm)

8.44"(214mm)

7.00"(178mm)

11.40"(290mm)

4.00"(102mm)

5.44"(138mm)

8.44"(214mm)

7.00"(178mm)

11.40"(290mm)

8.44"(214mm)

7.00"(178mm)

14.53"(369mm)

4.00"(102mm)

5.44"(138mm)

(3) 1/2" EMT KOs (4) .31" Dia. KOs

MMex seRIes

MMexFace1 Single Face 2 Double Face

material 0 14 Gauge CRS (painted) 3 14 Gauge SS (painted) 6 14 Gauge SS (brushed)

Letter ColorG Green R Red

Voltage120 120 volts277 277 volts

Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin

optionsEL Standard Lumen EL packCEL Cold weather EL pack XaC auxiliary aC Supply (specify X120 or X277 volt) XDC auxiliary DC Supply (specify X6, X12 or X24 volt) bLk black Exterior

AccessoriesLp Laser pointer9500 pOSIGRIp™ Screwdriver

sPecIfIcaTIons

HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).

Door: One-piece die-formed prime grade 14-gauge CRS. Corners continuously seam welded and smooth with no post grinding (TIG).

LeGenD: Legend illuminated by internal high output LEDs. Lettering six inches high with .750 inch stroke. Internal panels with stencil cut letters and red or green filter panel. Exter-nal panel .188 inch thick clear polycarbonate. Universal arrows.

FAsteners: Hardened security screws as specified - see ordering information.

FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. See Options for black exterior.

eLeCtrICAL: meets all UL requirements for Green and Red LED technology in regards to nanometer wavelength, maX/mIN ratios and footlamberts in both aC and DC modes.Options: Sealed nickel-cadmium Emergency battery pack (EL) with standard battery condi-tioning, self test and self diagnostic circuitry, remote laser activated test switch, protected mechanical test switch and status indicator. provides 120 minutes of emergency opera-tion. Emergency battery pack (EL) suitable for 50ºF to 113ºF. Cold weather Emergency bat-tery pack (CEL) suitable for -49ºF to 113ºF.

LIstInGs: UL listed for wet Location.

DIMensIonal DaTa Cross section mounting Details single Face

oRDeRIng InfoRMaTIonseries Face material Letter Color Voltage Fasteners options

waLL/CEILING mOUNT INDIRECT LED SINGLE aND DOUbLE FaCE

Double Face

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Mighty Mac®

7� 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 73: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

3.27"(83mm)

4.00"(102mm)

8.80"(224mm)

7.00"(178mm)

14.00"(356mm)

(4) .31" Mounting Holes .875" Dia. Hole

waLL mOUNT INDIRECT LED SINGLE FaCE

sPecIfIcaTIons

sHIeLD: U.v. stabilized, high impact, injection molded clear polycarbonate. Nominal thick-ness .125". Captive stainless steel pOSIG-RIp™ fasteners secure shield to housing. Continuous closed cell silicone gasket seals shield to housing.

HousInG: High impact, injection molded polycarbonate. Housing provided with four-point mounting holes, one wireway hole and temporary junction box mounting drill points – see Cross Section/Details. Closed cell die-cut Neoprene gasket seals housing to mount-ing surface.

LeGenD: Legend illuminated by internal high output LEDs. Lettering six inches high with .750 inch stroke. polycarbonate red or green filter panels. High impact, injection molded polycarbonate stencil and field selectable chevron inserts.

eLeCtrICAL: Electrical components mounted to removable high impact, injection molded polycarbonate chassis. Drill points provided for optional surface conduit entry.Options: Sealed nickel-cadmium Emergency battery pack (EL) with standard battery condi-tioning, self test and self diagnostic circuitry, remote laser activated test switch, protected

mechanical test switch and status indicator. provides 120 minutes of emergency opera-tion; 60 minutes with CSa option. Emergency battery pack (EL) suitable for 50ºF to 113ºF. Cold weather Emergency battery pack (CEL) suitable for -49ºF to 113ºF.

LIstInGs/CertIFICAtIons: UL and CUL listed for wet Locations. UL Classified Ip64. meets or exceeds UL924 and NFpa 101 standards. Optional CSa Certified and labeled. meets or exceeds CSa C22.2 No. 141, C860-01 and NRCaN/C860-01 requirements.

InstALLAtIon: Standard four-point mounting required for peace of mind Lifetime Guarantee™.

MeTsWFinishmb matte black Exteriormw matte white Exterior

Legend Color R RedG Green

VoltageDT 120/277 voltsDTC* 120/347 volts

* available only with CSa Option.

optionsEL Standard Lumen EL pack CEL Cold weather EL packXaC auxiliary aC Supply (matches voltage selection)XDC auxiliary DC Supply (6/12/24 volts)CSa Certified and Labeled to Comply with Canadian Standards

AccessoriesLp Laser pointer9500 pOSIGRIp™ Screwdriver

DIMensIonal DaTa Cross section Baseplate mounting View

oRDeRIng InfoRMaTIonseries Finish Legend Color Voltage options Accessories

MeTsW seRIes pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Millenium Metrex™

7310�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 74: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

4.04"(103mm)

4.00"(102mm)

9.55"(243mm)

7.00"(178mm)

14.00"(356mm)

(4) .31" Mounting Holes 2.00" Dia. Hole

8.80"(224mm)

5.80"(147 mm)

4.00"(102mm)

7.00"(178mm)

(4) .31" Mounting Holes2.00" Dia. Hole

8.80"(224mm)

5.80"(147 mm)

14.75"(375mm)

8.80"(224mm)

4.04"(103mm)

3.27"(83mm)

4.00"(102mm)

9.55"(243mm)

7.00"(178mm)

14.00"(356mm)

(4) .31" Mounting Holes 2.00" Dia. Hole

8.80"(224mm)

5.80"(147 mm)

3.27"(83mm)

4.00"(102mm)

7.00"(178mm)

(4) .31" Mounting Holes2.00" Dia. Hole

8.80"(224mm)

5.80"(147 mm)

14.75"(375mm)

8.80"(224mm)

MeTsu anD MeTDu seRIes waLL/CEILING mOUNT INDIRECT LEDSINGLE aND DOUbLE FaCE

sPecIfIcaTIons

sHIeLD: U.v. stabilized, high impact, injection molded clear polycarbonate. Nominal thick-ness .125". Captive stainless steel pOSIG-RIp™ fasteners secure shield to housing. Continuous closed cell silicone gasket seals shield to housing.

HousInG: High impact, injection molded polycarbonate. Housing provided with canopy mounting and wireway drill points top and side – see Cross Section/Details. Closed cell die-cut Neoprene gasket seals housing to canopy.

CAnoPy: High impact, injection molded polycarbonate canopy cover with heavy gauge galvanized steel mounting plate with integral 1/4-20 threaded studs. Canopy mounting plate provided with four-point mounting holes, one

wireway hole and temporary junction box mounting holes. Closed cell die-cut Neoprene gasket seals canopy to mounting surface.

LeGenD: Legend illuminated by internal high output LEDs. Lettering six inches high with .750 inch stroke. polycarbonate red or green filter panels. High impact, injection molded polycarbonate stencil and field selectable chevron inserts.

eLeCtrICAL: Electrical components mounted to removable high impact, injection molded polycarbonate chassis. Drill points provided for optional conduit entry.Options: Sealed nickel-cadmium Emergency battery pack (EL) with standard battery condi-tioning, self test and self diagnostic circuitry,

remote laser activated test switch, protected mechanical test switch and status indicator. provides 120 minutes of emergency opera-tion; 60 minutes with CSa option. Emergency battery pack (EL) suitable for 50ºF to 113ºF. Cold weather Emergency battery pack (CEL) suitable for -49ºF to 113ºF.

LIstInGs/CertIFICAtIons: UL and CUL listed for wet Locations. UL Classified Ip64. meets or exceeds UL924 and NFpa 101 standards. Optional CSa Certified and labeled. meets or exceeds CSa C22.2 No. 141, C860-01 and NRCaN/C860-01 requirements.

InstALLAtIon: Standard four-point mounting required for peace of mind Lifetime Guarantee™.

DIMensIonal DaTa Cross section Ceiling Canopy mounting View Ceiling mount

mETSU Single Face mETDU Double Face

end Canopy mounting View

End mount

mETSU Single Face mETDU Double Face

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

Millenium Metrex™

mETSU Single FacemETDU Double Face

Finishmb matte black Exteriormw matte white Exterior

Legend Color R RedG Green

VoltageDT 120/277 voltsDTC* 120/347 volts

* available only with CSa Option.

optionsEL Standard Lumen EL pack CEL Cold weather EL packXaC auxiliary aC Supply (matches voltage selection)XDC auxiliary DC Supply (6/12/24 volts)CSa Certified and Labeled to Comply with Canadian Standards

AccessoriesLp Laser pointer9500 pOSIGRIp™ Screwdriver

oRDeRIng InfoRMaTIonseries Finish Legend Color Voltage options Accessories

74 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 75: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

49.38”(1254mm)

4.75”(121mm)

13.97”(355mm)

(8) .41" Dia. Mounting Holes6.75”

(171mm)6.75”

(171mm)

13.5”(343mm)

13.97”(355mm)

2" Dia. 2.25”(57mm)

49.44”(1256mm)

41.44”(1053mm)

2.25”(57mm)4.8”

(122mm)

3.38”(86mm)

3.38”(86mm)

(2) 1/2" EMTKOs 24.72”

(628mm)

(6) .38" Holes

(4) 1/4-20 Weld Nuts

3”(76mm)

21.72”(552mm)

21.72”(552mm)

2”(51mm)

2”(51mm)

.5”(13mm)

4.50"(114mm)

4.75"(121mm)

Lens Tw ist-out and Wireway 1/2" EMT KO

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

nova I™n548 series (7100) CEILING/waLL mOUNT/SURFaCE

Lamps: biax, T8, T5Size: Nominal 5"x48"

width Length Depth5" 49.5" 4.5"

Lens typeC Clear prismatic

Lamp Qty1 One Lamp2 Two Lamps

Lamp type28 F28T5 (One lamp only)32 F32T840b F40TT

Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8, T5) Cw Cold weatherSb Specified ballast

Ballast Qty1 OneT Tandem wiring

Voltage120 120 volts277 277 volts347 347 voltsDv 120/277 volts (<10% THD), electronic ballasts only

optionsCO Convenience Outlet - Non GFI Receptacle (wall mount) 120 volts onlyEL T-8 One-Lamp Indoor battery pack (32ºF)EL2 T-8 1100 Lumen One-Lamp Indoor battery pack (32ºF)FS Single Fuse & HolderIR Internal Reflector (wall mount)pS push Switch (wall mount)TN 5 watt Twin Tube NpF Night Light

AccessoriesCm Corner mount adapter – Damp Locations onlyCmw Corner mount adapter – wet Location Covered Ceiling onlySa Surface adapter – wet Location Covered Ceiling only9500 pOSIGRIp™ Screwdriver

sPecIfIcaTIons

Lens/HousInG: One-piece wraparound lens/housing with ten alignment security tabs for baseplate engagement (U.v. stabilized, high impact, virgin injection molded polycarbonate). Clear prismatic refractor. Nominal thickness .125".

BAsePLAte: 16-gauge CRS. baseplate provided with eight-point mounting holes and one wireway hole – see Cross Section/De-tails. TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

eLeCtrICAL: Class p ballasts. Fluorescent electronic 120/277/347 and dual voltage bal-lasts high power factor. One-lamp 90 minute nickel-cadmium battery pack (EL) includes inverter charger, test switch and charging indicator lamp – indoor use only.

soCkets: Shock-resistant sockets with internal locking collar to ensure positive lamp retention.

GAsket: Die-cut closed cell neoprene gasket seals lens/housing to mounting surface.

HArDWAre: Six stainless steel pOSIGRIp™ fasteners secure lens/housing to baseplate.

LIstInGs/CertIFICAtIons: UL and CUL list-ed for Damp Locations – wall mount. UL and CUL listed for wet Location – covered ceilings only. U.S. patent Nos. 246330; 4025780.

InstALLAtIon: Eight-point mounting required for peace of mind Lifetime Guaran-tee™. “Twist-out” sections, with gaskets, per-mit 1/2" conduit access on each end without special adapter.

PHotometrICs: For additional photometric information, go to www.kenall.com.

oRDeRIng InfoRMaTIonseries Lens Lamp Lamp Ballast Ballast Voltage options Accessories type Qty type type Qty

DIMensIonal DaTa Cross section Baseplate Convenience outlet (Co) Internal reflector (Ir)

Corner mounting Adapter (Cm)

n548 c

7�10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 76: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

9.25”(235mm)

3.25”(83mm)

(4) .38” dia.mounting holes

20”508mm

20”(508mm)

9.25”(235mm)

50.75”(1289mm)

(2) mounting keyholes

2" dia. Wireway hole

7”(178mm)

9.75”(248mm)

6.9”(175mm)

(2) 1/2" emtkos

2”(51mm)

6.9”(175mm)

50.75”(1289mm)

11.68”(297mm)

7”(178mm)

20”(508mm)

(10) .38" holes (6) 1/4-20 Weld nuts

25.38”(645mm)

24.38”(619mm)

24.38”(619mm)

4”(102mm)

11.68”(297mm)

12.68”(322mm)

12.68”(322mm) 1”

(25mm)1”

(25mm)

.5”(13mm)

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

nova II™n1048 seRIes (7200) CEILING mOUNT/SURFaCE

Lamps: biax, T8, T5Size: Nominal 10"x48"

width Length Depth9.25" 51" 3.25"

Lens typeC Clear prismaticp pearlescent

Lamp Qty2 Two Lamps3 Three Lamps (T8 only)4 Four Lamps

Lamp type28 F28T5 (Two lamps only)32 F32T840b F40TT

Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8, T5) Cw Cold weatherSb Specified ballast

Ballast Qty1 One2 TwoT Tandem wiring

Voltage120 120 volts277 277 volts347 347 voltsDv 120/277 volts (<10% THD), electronic ballasts only

optionsEL T-8 One-Lamp Indoor battery pack (32ºF)FS Single Fuse & HoldermS6 Six maximum Security Flange Retainer ClipsTN 5 watt Twin Tube NpF Night Light

AccessoriesCm Corner mount adapter (682) Damp Locations onlySa Surface adapter (7200a)9500 pOSIGRIp™ Screwdriver

sPecIfIcaTIons

Lens/HousInG: One-piece wraparound lens/housing with ten alignment security tabs for baseplate engagement (U.v. stabilized, high impact, virgin injection molded polycarbonate). High efficiency Clear prismatic or pearlescent refractor. Nominal thickness .125".

BAsePLAte: 16-gauge CRS. baseplate provided with six-point mounting holes and one wireway hole – see Cross Section/De-tails. TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.

eLeCtrICAL: Class p ballasts. Fluorescent electronic 120/277/347 and dual voltage bal-lasts high power factor. One-lamp 90 minute nickel-cadmium battery pack (EL) includes inverter charger, test switch and charging indicator lamp – indoor use only.

soCkets: Shock-resistant sockets with internal locking collar to ensure positive lamp retention.

GAsket: Die-cut closed cell neoprene gasket seals lens/housing to mounting surface.

HArDWAre: Two stainless steel pOSIGRIp™ fasteners secure lens/housing to baseplate.

LIstInGs/CertIFICAtIons: UL and CUL listed for wet Location – covered ceilings only.

InstALLAtIon: Six-point mounting required for peace of mind Lifetime Guarantee™. “Twist-out” sections, with gaskets, permit 1/2" conduit access on each end without special adapter.

PHotometrICs: For additional photometric information, go to www.kenall.com.

oRDeRIng InfoRMaTIonseries Lens Lamp Lamp Ballast Ballast Voltage options Accessories type Qty type type Qty

DIMensIonal DaTa Cross section Baseplate

Corner mounting Adapter (Cm)

n1048

76 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 77: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

3.75"(95mm)

5.14"(130mm)

32.00"(813mm)

48.75"(1238mm)

24.00"(610mm)

3.75"(95mm)

5.14"(130mm)

16.00"(406mm)

24.75"(628mm)

n/a

4' unit 2' unit

2" dia. ko4' unit

2' unit

(2) 1/2" emt kos (6) .31" dia. holes .75" x 1.5" oblong holen/a (4) .31" dia. holes

DIMensIonal DaTa Cross section Baseplate

Corner mounting Adapter (Cm)

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

sheriff™sH524 anD sH548 seRIes CEILING/waLL mOUNT/SURFaCE

Lamps: biax, T8, T5, T5HOSize: Nominal 5"x24" and 5"x48"

width Length Depth5.14" 24.75" 3.75"5.14" 48.75" 3.75"

nominal Length24 2’ 48 4’

Lamp Qty1 One Lamp2 Two Lamps3 Three Lamps

* available with one lamp only

Lamp typeTwo Foot Lengths14* F14T517 F17T8 (2’ only)40b F40TT (1)Four Foot Lengths28* F28T532 F32T8 (4’ only)54* F54T5HO40b F40TT (2)

Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8, T5, T5HO) Cw Cold weatherSb Specified ballast

Ballast Qty1 One2 TwoT Tandem wiring (Consult factory)

Voltage120 120 volt277 277 volt347 347 voltDv 120/277 volts (<10% THD), electronic ballasts only

options.187 .187" p12 polycarbonate LensOp Opal polycarbonate LensaL marine Grade aluminum HousingbSS brush Stainless Steel HousingpSS painted Stainless Steel HousingEL One-Lamp Indoor battery pack (32ºF)FS Single Fuse & HolderkO Two 1/2" EmT Conduit Entry knockouts (one per end cap)TN 5 watt Twin Tube NpF Night LightDLN LED Night Light w/Light Level Control pm pendant mount

AccessoriesCmw Corner mount adapter – wet Location Covered, Ceiling only9500 pOSIGRIp™ Screwdriver

sPecIfIcaTIons

Lens: Cold formed .156" p12 polycarbonate lens. See Options for alternate lenses.

BAsePLAte: One-piece 16-gauge CRS base-plate with welded corners. baseplate provided with four-point (2 foot) or six-point (4 foot) mounting holes and one wireway hole – see Cross Section/Details. TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Lens is positioned in baseplate channels and retained with stainless steel pOSIGRIp™ fasteners (two fasteners/2 foot; six fasteners/4 foot). baseplate/end caps mount flush to ceiling or wall surface.

eLeCtrICAL: Class p ballasts. Fluorescent electronic 120/277/347 and dual voltage bal-lasts high power factor. One-lamp 90 minute nickel-cadmium battery pack (EL) includes inverter charger, test switch and charging indicator lamp – indoor use only.

soCkets: Shock-resistant sockets with internal locking collar to ensure positive lamp retention.

HArDWAre: Stainless steel pOSIGRIp™ fasteners secure lens in baseplate channel.

LIstInGs/CertIFICAtIons: UL and CUL listed for Damp Locations – wall mount. UL and CUL listed for wet Location – covered ceilings only.

InstALLAtIon: Four-point (2 foot) or six-point (4 foot) mounting required for peace of mind Lifetime Guarantee™.

PHotometrICs: For additional photometric information, go to www.kenall.com.

oRDeRIng InfoRMaTIonseries Length Lamp Lamp Ballast Ballast Voltage options Accessories Qty type type Qty

DIMensIonal DaTa

Cross section Baseplate

sH5

7710�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 78: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

24.00"(609mm)

32.00"(812mm)

48.75"(1238mm)

16.00"(406mm)

6.50"(165mm)

1.50" dia. Wire thru k.o.

(2) 0.875" dia. k.o.'s

(6) .312" dia.mounting holes

3.50"(89mm)

(2) keyholes fortemporary "J"box instalation

8.312"(211mm)

2.75"(69mm)

16.00"(406mm)

24.75"(629mm)

6.50"(165mm)

1/2" emt hole (7/8" dia.)

(4) .312" dia.mounting holes

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

sheriff™sH824 anD sH848 seRIes CEILING/waLL mOUNT/SURFaCE

Lamps: T8, T5, T5HOSize: Nominal 8"x24" and 8"x48"

width Length Depth8.31" 24.75" 2.75"8.31" 48.75" 2.75"

nominal Length24 2’ 48 4’

Lamp Qty2 Two Lamps

Lamp typeTwo Foot Lengths17 F17T8 Four Foot Lengths28 F28T532 F32T854 F54T5HO

Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (T8, T5, T5HO) Cw Cold weatherSb Specified ballast

Ballast Qty1 One2 TwoT Tandem wiring (Consult Factory)

Voltage120 120 volt277 277 volt347 347 voltDv 120/277 volts (<10% THD), electronic ballasts only

options.187 .187" p12 polycarbonate LensOp Opal polycarbonate LensaL marine Grade aluminum HousingbSS brush Stainless Steel HousingpSS painted Stainless Steel HousingEL T-8 One-Lamp Indoor battery pack (32ºF)EL2 T-8 1100 Lumen One-Lamp Indoor battery pack (32ºF) (4' only)FS Single Fuse & HolderkO Two 1/2" EmT Conduit Entry knockouts (one per end cap)TN 5 watt Twin Tube NpF Night LightDLN LED Night Light w/Light Level Control pm pendant mount

Accessory9500 pOSIGRIp™ Screwdriver

sPecIfIcaTIons

Lens: Cold formed .156" p12 polycarbonate lens. See Options for alternate lenses.

HousInG: One-piece, seam welded 16-gauge CRS baseplate and end caps. baseplate provided with four-point (2 foot) or six-point (4 foot) mounting holes and one wireway hole – see Cross Section/Details. TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Lens is positioned in baseplate channels and retained with stainless steel pOSIGRIp™ fasteners two fasteners/2 foot; six fasteners/4 foot). baseplate/end caps mount flush to ceil-ing or wall surface.

eLeCtrICAL: Class p ballasts. Fluorescent electronic 120/277/347 and dual voltage bal-lasts high power factor. One-lamp 90 minute nickel-cadmium battery pack (EL) includes inverter charger, test switch and charging indicator lamp – indoor use only.

soCkets: Shock-resistant sockets with internal locking collar to ensure positive lamp retention.

HArDWAre: Stainless steel pOSIGRIp™ fasteners secure lens in baseplate channel.

LIstInGs/CertIFICAtIons: UL and CUL listed for Damp Locations – wall mount. UL and CUL listed for wet Location – covered ceilings only.

InstALLAtIon: Four-point (2 foot) or six-point (4 foot) mounting required for peace of mind Lifetime Guarantee™.

PHotometrICs: For additional photometric information, go to www.kenall.com.

oRDeRIng InfoRMaTIonseries Length Lamp Lamp Ballast Ballast Voltage options Accessory Qty type type Qty

DIMensIonal DaTa

Cross section Baseplate

sH8 2

78 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 79: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

24.00"(609mm)

32.00"(812mm)

48.75"(1238mm)

16.00"(406mm)

9.50"(241mm)

1.50" Dia. Wire Thru K.O.

(2) 0.875" Dia. K.O.'s

(6) .312" Dia.Mounting Holes

3.50"(89mm)

(2) Keyholes ForTemporary "J"Box Installation

12.31"(312mm)

2.75"(69mm)

12.31"(312mm)

2.75"(69mm)

32.00"(812mm)

48.75"(1238mm)

16.00"(406mm)

9.50"(241mm)

1.50" Dia. Wire Thru K.O. (6) .312" Dia.Mounting Holes

3.50"(89mm)

(2) Keyholes ForTemporary "J"Box Installation

pROJECT INFORmaTION

Job Name

Fixture Type

Catalog Number

approved by

sheriff™sH1248 seRIes CEILING/waLL mOUNT/SURFaCE

Lamps: T8, T5, T5HOSize: Nominal 12"x48"

width Length Depth12.3" 48.75" 2.75"

nominal Length48 4’

Lamp Qty2 Two Lamps3 Three Lamps4 Four Lamps

* available with two/three lamps only.

Lamp type28* F28T532 F32T854* F54T5HO

Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (T8, T5, T5HO) Cw Cold weatherSb Specified ballast

Ballast Qty1 One2 TwoT Tandem wiring (Consult Factory)

Voltage120 120 volt277 277 volt347 347 volt (T8 only)Dv 120/277 volts (<10% THD), electronic ballasts only

options.187 .187" p12 polycarbonate LensOp Opal polycarbonate LensaL marine Grade aluminum HousingbSS brush Stainless Steel HousingpSS painted Stainless Steel HousingEL T-8 One-Lamp Indoor battery pack (32ºF)EL2 T-8 1100 Lumen One-Lamp Indoor battery pack (32ºF)FS Single Fuse & HolderkO Two 1/2" EmT Conduit Entry knockouts (one per end cap)TN 5 watt Twin Tube NpF Night LightDLN LED Night Light w/Light Level Control pm pendant mount - 2 and 4 lamppm3 pendant mount - 3 lamp

Accessory9500 pOSIGRIp™ Screwdriver

sPecIfIcaTIons

Lens: Cold formed .156" p12 polycarbonate lens. See Options for alternate lenses.

HousInG: One-piece, 16-gauge CRS base-plate and seam welded end caps. baseplate provided with four-point mounting holes and one wireway hole – see Cross Section/De-tails. TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. See Options for alterna-tive materials and finishes. Lens is positioned in baseplate channels and retained with six stainless steel pOSIGRIp™ fasteners. base-plate/end caps mount flush to ceiling or wall surface.

eLeCtrICAL: Class p ballasts. Fluorescent electronic 120/277/347 and dual voltage bal-lasts high power factor. One-lamp 90 minute nickel-cadmium battery pack (EL) includes inverter charger, test switch and charging indicator lamp – indoor use only.

soCkets: Shock-resistant sockets with internal locking collar to ensure positive lamp retention.

HArDWAre: Stainless steel pOSIGRIp™ fasteners secure lens in baseplate channel.

LIstInGs/CertIFICAtIons: UL and CUL listed for Damp Locations – wall mount. UL and CUL listed for wet Location – covered ceilings only.

InstALLAtIon: Six-point mounting required for peace of mind Lifetime Guarantee™.

PHotometrICs: For additional photometric information, go to www.kenall.com.

oRDeRIng InfoRMaTIonseries Length Lamp Lamp Ballast Ballast Voltage options Accessory Qty type type Qty

DIMensIonal DaTa

Cross section Baseplate

sH12 48

7�10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 80: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

RecoMMenDeD fIxTuRes foR buIlDIng exTeRIoRs

MIllenIuM™ RounDs anD ovals

MIllenIuM fReescale™

For more information, visit us at www.kenall.com.

mR17EL/ESR/ED mR17bL/bSR/bD mR17CL/CSR/CD mR17FL/FSR/FD mR17Sp/Rp mR17Np/wp

FS512R/T FS812R/T FS1212R/T

mR13EL/ESR/ED mR13bL/bSR/bD mR13CL/CSR/CD mR13FL/FSR/FD

mO13EL/ED mO13bL/bD mO13CL/CD mO13FL/FD

mO13HL/HD mO13HbL/HbD

FS518R/T FS818R/T FS1218R/T

FS524R/T FS824R/T FS1224R/T

FS548R/T FS848R/T FS1248R/T

80 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 81: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

RecoMMenDeD fIxTuRes foR buIlDIng exTeRIoRs

MIllenIuM fInITe™

HeRculux™

H99SL/Sm/SD H99DSL/DSm/DSD H1212FL/Fm/FD H1212EL/Em/ED

H69FL/Fm/FD H69EL/Em/ED H612FL/Fm/FD H612EL/Em/ED H99FL/Fm/FD H99EL/Em/ED

H1212SL/Sm/SD H1212DSL/DSm/DSD

FN15L FN15D FN9L FN9D

For more information, visit us at www.kenall.com.

8110�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 82: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

This unique two week (10 working day, holidays excluded) shipment program offers nominal four foot linear fluores-cent pre-engineered wall, Corner, Recessed or Surface fixtures for small order quantities. The weekly order quantity maximum is 50 per customer ship to address. Standard specification sheet pDFs are available at www.kenall.com to promote these products. No UpS shipments.

Hsg/base Lamp Lamp ballast ballast Lens StandardSeries material qty Type Type qty voltage Inner/Outer Fastener Options

XwCU4 0/0 1/2 32 RS 1 or 2 120 or 277 1/b 1 TN

XCC4 0/0 2 32 RS 1 or 2 120 or 277 1/b 1 TNXCC4 0/0 3 32 RS 1 or 2 120 or 277 1/b 1 TN

XRCa4 0/0 2 32 RS 1 or 2 120 or 277 1/b 1 TN-YFXRCa4 0/0 3 32 RS 1 or 2 120 or 277 1/b 1 TN-YF

XRCD4 0/0 4 32 RS 1 or 2 120 or 277 1/b 1 TN-YF

XSSa4 0/0 2 32 RS 1 or 2 120 or 277 1/b 1 TN

XSSb4 0/0 2 32 RS 1 or 2 120 or 277 1/b 1 TNXSSb4 0/0 3 32 RS 1 or 2 120 or 277 1/b 1 TN

XSSD4 0/0 4 32 RS 1 or 2 120 or 277 1/b 1 TN

XSDa4 0/0 2 32 RS 1 or 2 120 or 277 1/b 1 TN

XSDD4 0/0 3 32 RS 1 or 2 120 or 277 1/b 1 TN

Note: Lamps by others.

quIck sHIP

8� 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 83: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

aDDITIonal lITeRaTuRe avaIlable

architectural high abuse lightingfor schools and universities

KENALL DARK SKY LUMINAIRESMillenium Finite™ – Wall MountMillenium Edge™ – Ceiling MountHerculux™ – Wall and Ceiling Mount

Dark-Sky Friendly Fixture

®APPROVED

MILLENIUM FREESCALE™ARCHITECTURAL SCONCES

Attractive, Tough and EfficientCUSTOMIZABLE LIGHTING SOLUTIONS

millenium metrex™architectural high abuse led exit signs

herculux™compact fluorescent and hid luminairesfor ceiling and Wall installation

kenall express™ – 24 hour ship architectural high abuse lighting for schools & universities

kenall dark sky luminaires

millenium freescale™ millenium metrex™ herculux™

visit kenall's web site at www.kenall.com for our latest product information.at this site you can:• obtain up-to-date technical information• download photometric files• view the latest product installations

the kenall web site is frequently updated to bring you the most current information available on the full line of kenall products.

8310�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com

Page 84: LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp RecoMMenDeD lIgHTIng levels

1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FaX 847-360-1781 www.kenall.com ©2009 kenall