lima (-i) - 8deviceslima is a qca 4531 chipset based module with a 650 mhz cpu and 802.11n 2x2...
TRANSCRIPT
Lima (-I) Product brief
Quick specs• 802.11 b/g/n, 2.4 GHz, 2x2 MIMO, 300 Mbps data rate, 21 dB per chain output power
• U.FL connectors or external pin for external an tenna
• 32 MB FLASH, 64 MB DDR2 RAM
• Linux friendly , OpenWRT flash image and source code are available for download on www.8devices.com/wiki_lima
• CPU – QCA 4531, 650 MHz clock speed
• Small form factor (25 by 35 mm)
• Surface mountable, dual-side design
• Industrial and commercial temperature range models
• Available interfaces - USB 2.0 host, 2 x Ethernet, UART, PCIe, GPIO, JTAG
Lima has 802.11N 2x2 radio supporting up to 300 Mbps data-rate and comes in two versions: commercial or industrial temperature
Lima is a QCA 4531 chipset based module with a 650 MHz CPU and 802.11N 2x2 (MIMO) radio. Module is available in two temperature ranges: commercial* (Lima) and industrial** (Lima-I).
Lima is a surface mountable, dual-sided, Wi-Fi enabled Linux module for the (IoE) internet of everything applications.
Faster CPU, 300 Mbps data-rate, low power consumption, larger 32 MB flash memmory and a development kit with more interfaces (e.g. PCIe) are the key differentiators from Carambola 2 module.
OpenWRT linux distribution source code is available on GitHub https://github.com/8devices and is supported by our growing community on http://www.8devices.com/community forum.
*Commercial temperature range: 0 - 65° C**Industrial temperature range: -40 - 85° C
2 Lima Product brief
Development kit
Module dimensions
1.20
2.03
4
1.8
5
4.90 2.68 4.89 2.69
3.8
0
3.8
0 4
2.04
19.13
12
24.
45
35.50 2.70
3.6
33.46
22.
42
1.8
5
1 1
234
5 5
6 6
7
1 - 2 x 100 Base-T Ethernet ports
2 - Mini USB Type-A socket (console + power)
3 - USB Type-A socket
4 - Buttons: S1 - programmable (GPIO connected), S2 - reset
5 - Two integrated antennas
6 - 2.45 mm pitch connector holes
7 - MINI PCIe socket
Block diagram
LIMAMODULE
QCA4531SOC
RF ANT 1RF
FRONT END
RF FRONT END
NOR32MBMEMORY
DDR264MBMEMORY
+3.3V
100BaseT ETHERNET 0
100BaseT ETHERNET 1
PCIe (HOST)
UART (CONSOLE)
SPI
GPIO
+2.0V ETH POWER SUPPLY
RF ANT 0
3 Lima Product brief
Module pinout
+3V3+3V3
GPIO_0GPIO_1GPIO_2GPIO_3GPIO_4
GNDETH1_TX_PETH1_TX_NETH1_RX_PETH1_RX_N
GNDETH0_RX_PETH0_RX_NETH0_TX_PETH0_TX_N
+2V0_ETH
123456789101112131415161718
GNDGND
GPIO_12GPIO_13GPIO_11PCIE_RST_OUTPCIE_CK_OUT_NPCIE_CK_OUT_PPCIE_RX_NPCIE_RX_PPCIE_TX_NPCIE_TX_P
RESETGND
4342
41403938373635343332
3130
GN
DG
ND
GPI
O_9
GPI
O_1
0G
PIO
_17
GPI
O_1
6G
PIO
_15
GPI
O_1
4
GN
DAN
T0G
ND
54 53 52 51 50 49 48 47 46 45 44
SPI_
CS
SPI_
MIS
OSP
I_C
LK
SPI_
MO
SIG
ND
USB
_DP
USB
_DN
GN
D
GN
DAN
T1G
ND
19 20 21 22 23 24 25 26 27 28 29