liquifit - parker · pdf filetel: +358 (0)20 753 2500 [email protected] fr ... +58 212...

™LIQUIfit

aerospaceclimate controlelectromechanicalfiltrationfluid & gas handlinghydraulicspneumaticsprocess controlsealing & shielding

Range of Fittings, Tubings and Accessories for Water and Beverages

Fluid System Connectors EuropeLegris SASParker Hannifin CorporationCS 46911 - 74 rue de Paris 35069 Rennesphone : +33 (2) 99 25 55 00fax : +33 (2) 99 25 55 99www.parkerconnectic.com

CAT/0598/UK or 0000 05 98GB 04/10GB© 2010 Parker Hannifin Corporation. All rights reserved.

AE – UAE, Dubai Tel: +971 4 8127100 [email protected]

AR – Argentina, Buenos Aires Tel: +54 3327 44 4129

AT – Austria, Wiener Neustadt Tel: +43 (0)2622 23501-0 [email protected]

AT – Eastern Europe, Wiener Neustadt Tel: +43 (0)2622 23501 900 [email protected]

AU – Australia, Castle Hill Tel: +61 (0)2-9634 7777

AZ – Azerbaijan, Baku Tel: +994 50 2233 458 [email protected]

BE/LU – Belgium, Nivelles Tel: +32 (0)67 280 900 [email protected]

BR – Brazil, Cachoeirinha RS Tel: +55 51 3470 9144

BY – Belarus, Minsk Tel: +375 17 209 9399 [email protected]

CA – Canada, Milton, Ontario Tel: +1 905 693 3000

CH – Switzerland, Etoy Tel: +41 (0) 21 821 02 30 [email protected]

CL – Chile, Santiago Tel: +56 2 623 1216

CN – China, Shanghai Tel: +86 21 2899 5000

CZ – Czech Republic, Klecany Tel: +420 284 083 111 [email protected]

DE – Germany, Kaarst Tel: +49 (0)2131 4016 0 [email protected]

DK – Denmark, Ballerup Tel: +45 43 56 04 00 [email protected]

ES – Spain, Madrid Tel: +34 902 330 001 [email protected]

FI – Finland, Vantaa Tel: +358 (0)20 753 2500 [email protected]

FR – France, Contamine s/Arve Tel: +33 (0)4 50 25 80 25 [email protected]

GR – Greece, Athens Tel: +30 210 933 6450 [email protected]

HK – Hong Kong Tel: +852 2428 8008

HU – Hungary, Budapest Tel: +36 1 220 4155 [email protected]

IE – Ireland, Dublin Tel: +353 (0)1 466 6370 [email protected]

IN – India, Mumbai Tel: +91 22 6513 7081-85

IT – Italy, Corsico (MI) Tel: +39 02 45 19 21 [email protected]

JP – Japan, Tokyo Tel: +(81) 3 6408 3901

KR – South Korea, Seoul Tel: +82 2 559 0400

KZ – Kazakhstan, Almaty Tel: +7 7272 505 800 [email protected]

LV – Latvia, Riga Tel: +371 6 745 2601 [email protected]

MX – Mexico, Apodaca Tel: +52 81 8156 6000

MY – Malaysia, Shah Alam Tel: +60 3 7849 0800

NL – The Netherlands, Oldenzaal Tel: +31 (0)541 585 000 [email protected]

NO – Norway, Ski Tel: +47 64 91 10 00 [email protected]

NZ – New Zealand, Mt Wellington Tel: +64 9 574 1744

PL – Poland, Warsaw Tel: +48 (0)22 573 24 00 [email protected]

PT – Portugal, Leca da Palmeira Tel: +351 22 999 7360 [email protected]

RO – Romania, Bucharest Tel: +40 21 252 1382 [email protected]

RU – Russia, Moscow Tel: +7 495 645-2156 [email protected]

SE – Sweden, Spånga Tel: +46 (0)8 59 79 50 00 [email protected]

SG – Singapore Tel: +65 6887 6300

SK – Slovakia, Banská Bystrica Tel: +421 484 162 252 [email protected]

SL – Slovenia, Novo Mesto Tel: +386 7 337 6650 [email protected]

TH – Thailand, Bangkok Tel: +662 717 8140

TR – Turkey, Istanbul Tel: +90 216 4997081 [email protected]

TW – Taiwan, Taipei Tel: +886 2 2298 8987

UA – Ukraine, Kiev Tel +380 44 494 2731 [email protected]

UK – United Kingdom, Warwick Tel: +44 (0)1926 317 878 [email protected]

US – USA, Cleveland Tel: +1 216 896 3000

VE – Venezuela, Caracas Tel: +58 212 238 5422

ZA – South Africa, Kempton Park Tel: +27 (0)11 961 0700 [email protected]

Parker Worldwide

European Product Information Centre

Free phone: 00 800 27 27 5374

(from AT, BE, CH, CZ, DE, DK, EE, ES, FI,

FR, IE, IL, IS, IT, LU, MT, NL, NO, PL, PT, RU,

SE, UK, ZA)

™LIQUIfit

•

2

Compressed air pipe systems,vacuum pipe

systems for automation

Water and beverage dispensing

Pneumatic range: Air and liquid pipe systems

in food process applications

Autoline:Couplers for fuel

systems

Transair:Air and water networks

for manufacturing

Transportation

Parker-Legris Industrial Applications

4 - 7

8

9

10 - 15

16 - 22

24 - 25

23

26 - 27

28 - 29

31

30

™LIQUIfit

3

KTW and W270

NSF 61In compliance with NSF/ANSI-61, the fittings and tubing shown in this catalogue are tested, certified and approved for contact with drinking water- C HOT

NSF 51In compliance with NSF/ANSI-51, the fittings and tubing shown in this catalo-gue are tested, certified and approved for contact with food up to 95°C

FDAAll materials in contact with food and drinking water are in com-pliance with the American Food and Drug Administration

In compliance with 1935/2004/EC, all the materials in contact with fluids are approved for contact with food and drinking water

All the products shown in this catalogue are RoHS certified

NSF 42 - NSF 58In compliance with NSF/ANSI- 42/58, the tubing shown in this catalogue is tested, certified and approved for contact with drinking water up to 95°C

ACSIn compliance with the directive 2002/72/EC, the fittings and tubing shown in this catalogue are tested, certified and approved by ACS for contact with drinking water

USDA NSF H1The grease used in the fittings of this catalogue conforms to USDA NSF H1 recommendations

Advantages of the LIQUIfit™ Range

Technical Features

Fields of Application

Metric Fittings Range

Carstick Cartridges

Accessories

Non-Return Valves and Ball Valves

LIQUIfit™ Website

Complementary Products

Fractional Inch Fittings Range

Tubing

®

Regulations

Table of Contents

The tubing shown in this catalogue is tested, certified and approved for contact with drinking water

For inch tubing

• • • • • • •

• •

™LIQUIfit

4

SpecificationsSuitable fluids: water, beverages, food, CO

2...

For use with chemicals or other potentially aggressive liquids,contact the local Parker-Legris technical department (www.liquifit.net).

Working pressure 4,6,8 mm - 16 bar from -10° to 40°C and temperature 5/32", 1/4", 5/16" : 10 bar at 65°C 4 bar at 95°C 10 mm - 3/8" : 13 bar from -10° to 40°C 7 bar at 65°C 4 bar at 95°C

12 mm - 1/2" : 11 bar from -10° to 40°C 7 bar at 65°C 4 bar at 95°C

Maximum circuit pressure also depends on the type of tube used.

Maximum torque values 1/8 and 1/4 : 1.5 Nm / 1.0 Ibf-ftfor plastic threads BSPT / NPTF 3/8 and 1/2 : 3.0 Nm / 2.2 Ibf-ft

Introducing LIQUIfit™

From the Trusted Inventor of the Instant Fitting

With over 40 years of experience, Legris now presents a range of leak-free, instant fittings in a bio-based compact body.

LIQUIfit™ offers: Optimum performance suitable for contact with water, beverages and food The most compact profile on the market 100% bio-based body and thread EPDM patented sealing technology Full flow No pumping effect No need for locking clip or tube insert Minimized internal retention Immediate sealing on threads

•

• •

•

•

•

•

•

™LIQUIfit

5

White Grey Available upon request

2 colours for fittings

Comprehensive range of products

9 colours (clear, red, blue, black, green, yellow, purple, orange, natural)

Inch sizes 5/32", 1/4", 5/16", 3/8", 1/2"Metric sizes 4, 6, 8, 10, 12 mm

Ball valves - non-return valves (NRV)

Parker Legris "Advanced PE" tubing •


Wide range of shapes

For tubes 4, 6, 8, 10, 12 mm

1/4", 5/32", 5/16", 3/8" and 1/2"

BSPT / NPT threads 1/8" to 1/2"

Innovative cartridge system

•

•

•

•

•

•

•

•

•

™LIQUIfit

6

•

•

•

High performance materials

Suitable for: water, beverages, CO2...

High chemical resistance (chlorine, cleaning agents, UV)... Approved quality for contact with food (FDA, NSF 61, 51, ACS)

Mechanical resistance over time

Optimal sealing

Quality control and date coding Automatic sealing: the D seal within the fitting provides a positive seal on the O.D. of the tube, in both static and dynamic positions, due to an optimized design of the fitting cavity.

Renewable bio-based material

The LIQUIfit™ body is manufactured from a unique bio-based high performance polymer produced from renewable plants, to expand the use of non-fossil-based resources.

CO2 emissions are divided by 5 compared

to classic polymer fittings.

All LIQUIfit™ threaded fittings have pre-applied PTFE thread sealant to save time during assembly, but may be ordered without thread pre-coating.

Part numbers : 63XX = with pre-coating 65XX = without pre-coating

PTFE immediate seal of threads

EPDM D seal

bio-basedmaterial

PTFE threadsealant

stainlesssteelgrippingring

retaining sleeve

releasebutton


The Parker-Legris production process includes indi-vidual testing and unit quality control and dating for all LIQUIfit™ instant fittings, in order to guarantee their quality and traceability.

LIQUIfit™ white and grey fittings comply with the following standards:

- C HOT - NSF 51 at 95°C

advanced patented sealing technology

•

•••

•

•

™LIQUIfit

7

All LIQUIfit™ threaded fittings have pre-applied PTFE thread sealant to save time during assembly, but may be ordered without thread pre-coating.

Part numbers : 63XX = with pre-coating 65XX = without pre-coating

Advanced design (patented)

The most compact profile on the market

Ergonomic and aesthetic design

Ergonomic release button

Easy-to-clean external shapes

Simply push the tubing until it can go no further. Gripping and sealing are accomplishedinstantaneously.

First depress the manual release button, then pull the tubing out of the fitting.

Innovative technology (patented)

Convenient compact full flow profile: as gripping and sealing within the fitting is achieved using the outside of the tube, there is no flow restriction. The smallest orifice inside the fitting is equal to or larger than the internal diameter of the tube.

Instant connection/disconnection

The much reduced movement of the LIQUIfit™ gripping system prevents any pumping effect

No tube insert or locking clip required at any working temperature (with Parker-Legris Advanced PE Tubing)

Advanced gripping design allows a tight bend radius without leaks

Can be used with prepared metallic tubing(please consult Parker-Legris’ technical department for the groove dimensions)

LIQUIfit™ 1/4 fitting Standard 1/4 fitting


Internal hex to allow easy mounting in a restricted amount of space

••

•

•

•

•

•

™LIQUIfit

8

Achieve a square cut edge with a tube cutter

Simply push the tubing until it can go no further. Holding and sealing is accomplished instantaneously

Pull on the tubing to verify gripping action

Make sure there is no flow

Depress the manual push button, then pull the tube out

Tighten by hand.Make final adjustment with wrench at the hex

Achieve a square cut and clean edge

Use Legris tube cutter.(p/n 3000 71 00)

Allow adequatebend radius of tube

Avoid using wrench on push-to- connect end

Avoid drastic angle cutting which can lead to an improper seal

Avoid using a knife or a blunt tool to cut the tubing. Avoid burrs, dirt, and anything that can hinder full flow

Avoid kinking the tubing and side load against the colletor gripping ring whichcan cause leaks

Avoid contaminating substances in fittings and cartridges

Technical Features

Maximum torque BSPT/NPTF Threads

MaximumTorque

1/8 and 1/4 3/8 and 1/2

1.0ft lbf-ft 2.2ft lbf-ft

1.5 Nm 3.0 Nm

Recommendations

Instant FittingsQuick Assembly

Instant FittingsQuick List

Installation of Parker-Legris fittings

Connection Disconnection Do’s Don’ts

Pressure and temperature of the different diameters of the LIQUIfit™ range

Pressure (bar) Pressure (bar)



4 6 8 10 12

4 6 8 10 12

4 6 8 10 12

1616161311

10101077

44444

1616161511

10101077

44444

-10-

10-

-4-4-

-----

-10-

1010

-7-77

-----

5/32 1/45/163/81/2

5/32 1/45/163/81/2

5/32 1/45/163/81/2

Fittings Fittings

Fittings

Fittings

Fittings

FittingsInch Ø Inch Ø

Inch Ø

Inch Ø

Inch Ø

Inch Ø

Metric Ø Metric Ø

Metric Ø

Metric Ø

Metric Ø

Metric Ø Tube Tube

Tube

Tube

Tube

Tube

NRV NRV

NRV

NRV

NRV

NRV

BallValves

BallValves

BallValves

BallValves

BallValves

BallValves

-10º C

1º C

20º C

4 6 8 10 12

1616161311

1616161511

-----

-----

5/32 1/45/163/81/2

4 6 8 10 12

1616161311

1616161511

-10-

10-

-10-

1010

5/32 1/45/163/81/2

4 6 8 10 12

1616161311

1616161511

-10-

10-

-10-

1010

5/32 1/45/163/81/2

40º C

65º C

95º C

•

™LIQUIfit

9

Suitable for a wide variety of uses in POU* water purification systems

The LIQUIfit™ range provides compact connections in all applications

Other typical areas of application for LIQUIfit™

Industrial water treatment systems

POE**: Water softeners

Drink dispense networks

* Point of Use ** Point of Entry

Water coolers and heaters

•

•

•

•

™LIQUIfit

4466888

1010101212

R1/8R1/4R1/8R1/4R1/8R1/4R3/8R1/4R3/8R1/2R3/8R1/2

F1 F2 HP3Option

BSPT

BSPT

6305

6305 04 10WP26305 04 13WP26305 06 10WP26305 06 13WP26305 08 10WP26305 08 13WP26305 08 17WP26305 10 13WP26305 10 17WP26305 10 21WP26305 12 17WP26305 12 21WP2

ØD

F1

F2

H

C

mm mmmm

10101010101010 101010 5 5

100100100100100100100100100100 50 50

111411141717171719221922

334466677799

0,0030,0040,0030,0040,0040,0040,0050,0050,0070,010,0080,012

1818181820202021,521,521,524,524,5

P2ØD C

C

6379

ØD

ØG

H

LF

C

P2

101010

101010

111111

141414

191919

81212

0,0020,0030,004

P3Option

6379 06 10WP26379 06 13WP26379 06 17WP2

100100100

mm mm mm mm mm

666

R1/8R1/4R3/8

ØD F G H L L1

10

Met

ric

Fitt

ing

s R

ang

e

Male connector - BSPT thread

Fixed elbow - BSPT thread

QtyQty

QtyQty

™LIQUIfit

P3Option

P3Option

P3Option

100100100100

100

6688

10

R1/8R1/4R1/4R3/8

G1/2

E

E

F

F

H

H

6315

6353

6315 06 10WP26315 06 13WP26315 08 13WP26315 08 17WP2

6353 10 21WP2

P2

P2

F

H

E

ØD

C

F

H

E

ØD

C

mm

mm

mm

mm

mm

mm

10101010

10

11141414

13161620

323333,536

0,0030,0040,0050,006

12 27 36 0,007

ØD

ØD

6309

6309 06 10WP26309 06 13WP26309 06 17WP26309 08 10WP26309 08 13WP26309 08 17WP26309 10 13WP26309 10 17WP26309 10 21WP26309 12 17WP26309 12 21WP2

L

H

C

ØG

F

ØD666888

1010101212

R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R3/8R1/2

ØD F G H L

101010101010101010 4 4

100100100100100100100100100 40 40

1314171919191919222222

10,510,510,513,513,513,51616161919

2828283434343838384444

24242429,529,529,534,534,534,54040

0,0060,0070,0080,010,0110,0110,0190,020,0230,0220,024

P2mm mm mm mm

101010101010101010 4 4

100100100100100100100100100 40 40

1314171919191919222222

10,510,510,513,513,513,51616161919

2828283434343838384444

18181823232326,526,526,53131

0,0080,0090,010,0120,0130,0130,0180,0190,0220,0240,026

L/2 L/2

C

H

ØD

ØG

F

6308


ØD F G H L/2P2

P3Option

666888

1010101212

R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R3/8R1/2

mm mm mm mm

11

BSPT

BSPT

BSPT

BSPP

C

C

C

C


Female connector - BSPT thread

Tap connector - BSPP thread flat type

Swivel elbow - BSPT thread

Swivel branch tee - BSPT thread

Qty

Qty

Qty

Qty

Qty

Qty

Qty

Qty

™LIQUIfit

6302 04 00WP26302 06 00WP26302 08 00WP26302 10 00WP26302 12 00WP2

6302 04 06WP26302 06 08WP26302 08 10WP26302 10 12WP2

6302

ØG

ØD2

ØDØD1

L

G

468

1012

468

10

68

1012

LP2

10101010 5

101010 5

8,510,513,51619

10,513,51619

19,52429,534,540,5

2429,534,540,5

0,0020,0040,0070,0150,017

0,0040,0070,0150,017

100100100100 50

100 100100 50

mm mmØD

ØD1 ØD2

101010101010101010 4 4

101010101010101010 5 5

100100100100100100100100100 40 40

100100100100100100100100100 50 50

1314171919191919222222

1919192323232525252828

0,0020,0030,0040,0030,0040,0040,0040,0050,0080,0050,007

1314171919191919222222

10,510,510,513,513,513,51616161919

40404050505056,556,556,565,565,5

22222227272730303034,534,5

18,518,518,523232326,526,526,53131

0,0080,0090,010,0120,0130,0130,0180,0190,0220,0240,026

C

H1

H

L

F

ØD

ØG

6303


ØD G H H1 LFP2

666888

1010101212

R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R3/8R1/2

mm mm mm mm mm

C

H

ØD

F

6321


F HP2mm mm

ØD

R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R1/2R3/8R1/2

666888

1010101212

P3Option

P3Option

P3Option

12

BSPT

BSPT

C

C


How to build part numbers : example 6305 08 17WP2

product range63XX = with pre-coating

65XX = without pre-coating

product typeXX05 = Male connector

XX79 = Fixed elbow

tube o.d. 4 6 8 10 12

thread code10 : 1/8 BSPT13 : 1/4 BSPT17 : 3/8 BSPT21 : 1/2 BSPT

coloursW = WhiteG = Grey

packagingP2 = standard packaging P3 = bulk packaging

Union elbow

Swivel male run tee - BSPT thread

Stem adapter - BSPT thread

6305 08 17 W P2

Qty

Qty

Qty

Qty

Qty

Qty

™LIQUIfit

10101010 5

101010101010 5

100100100100 50

100100100100100100 50

8,510,513,51619

8,513,513,516161919

8,510,513,51619

10,513,513,516161919

26,530374250,5

29373742425050

0,0020,0040,0070,0090,015

0,0040,010,0120,0180,020,0310,022

6306 04 00WP26306 06 60WP26306 08 00WP26306 10 00WP26306 12 00WP2

6306 04 06WP26306 04 08WP26306 06 08WP26306 06 10WP26306 08 10WP26306 08 12WP26306 10 12WP2

6306

L

ØG ØG ØD2ØDØD1

468

1012

446688

10

688

10101212

P2 G1 G2 Lmmmmmm

ØD

ØD1 ØD2

468

1012

6304

6304 04 00WP26304 06 00WP26304 08 00WP26304 10 00WP26304 12 00WP2ØG

ØD ØDØD1

ØD2

H

L/2 L/2

P2

10101010 5

100100100100 50

8,510,513,51619

20232934,540

15,51822,526,531

0,0040,0060,0090,0140,019

G H L/2mm mm mm

ØD

P3Option

P3Option

13

P3Option

ØD ØT

F

K

L1L2

ØD1

6316 04 00WP26316 06 00WP26316 08 00WP26316 10 00WP26316 12 00WP2

P2 Kmax L1F L2 Tminmmmmmmmm mm

ØD ØD1

468

1012

161821,52631

10101010 5

100100100100 50

1315182226

5,5 8,514,514,518,5

10,51010,51315,5

15,520273035

10,512,515,518,522,5

0,0180,0290,0370,0840,102

6316


All plastic nuts are fitted with an integrated O-ring to optimize sealing to a bulkhead wall.

Union connector

Union tee

Bulkhead union

Qty

Qty

Qty

Qty

QtyQty

™LIQUIfit

14

P3Option

P3

P3

P3

P3

Option

Option

Option

Option

468

10

468

10

468

10

468

10

ØD1

ØD1

ØD2

ØD2

tube

tube

H 2

ØD1

ØD2

ØG

L/2 L/2

H1H

H2

ØD1

L

H1H

ØD2H2

ØG

6388 04 00WP26388 06 00WP26388 08 00WP26388 10 00WP2

6383 04 00WP26383 06 00WP26383 08 00WP26383 10 00WP2

6388

10101010

10101010

100100100100

100100100100

8,510,513,516

8,510,513,516

2528,533,541

3338,54957

6 7 8 9,5

6 7 810,5

15,51721,524,5

15,51721,525,5

15162326,5

15182326,5

0,0050,0060,0080,012

0,0050,0060,0080,012

P2

P2

H1

H1

H2

H2

L/2

L

H

H

G

G

mm

mm

mm

mm

mm

mm

mm

mm

mm

mm

ØD

468

1012

ØD ØD

L

HN

K

6340 04 00WP26340 06 00WP26340 08 00WP26340 10 00WP26340 12 00WP2

6340

P2

10101010 5

100100100100 50

17,521,5283339

8,510,513,51619

3036,544,55360,5

91114,51720

0,0040,0070,0130,020,025

H K L Nmm mm mm mm

H

ØD

ØG

6351

P2

1010101010

100100100100100

8,510,513,51619

151721,52227,5

0,0010,0020,0030,0030,006

G Hmm mm

ØD

468

1012

6351 04 00WP26351 06 00WP26351 08 00WP26351 10 00WP26351 12 00WP2

6307 06 00WP26307 08 00WP2

6307

1010

1113,5

3645

2022,5

4,24,2

0,010,02

100100

P2 L T H Gmm mm mm mm

68

ØD

H L

ØGØT

ØDØD

ØD

ØD

6383

Plug-in branch tee with plastic tailpiece


Two-way divider

Tube cap

Cross

Plug-in equal and unequal run tee with plastic tailpiece

stem

Qty

Qty

Qty

QtyQty

Qty

Qty

Qty

QtyQty

available upon request


™LIQUIfit

6322 06 04WP26322 08 06WP26322 10 07WP2

6322

101010

P2

100100100

394350

252529,5

171722

0,0040,0050,006

L1 L2 Lmm mm mm

68

10

467

78,58

ØD1 ØD2 ØD3

6326 04 00WP26326 06 00WP26326 08 00WP26326 10 00WP26326 12 00WP2

6326

10101010 5

100100100100 50

6 8101214

3033354245

15,516,517,52122

0,0010,0010,0020,0030,004

P2 L1 L Gmm mm mm

ØD

468

1012

446688

101012

688

101012121414

L

L1

ØD2 ØD1ØG

6366 04 06WP26366 04 08WP26366 06 08WP26366 06 10WP26366 08 10WP26366 08 12WP26366 10 12WP26366 10 14WP26366 12 14WP2

6366

1010101010101010 5

100100100100100100100100 50

8,5 8,510,510,513,513,5161619

3838383948,548,5525355,5

23,5192017,528,524,533,533,533,5

0,0040,0040,0040,0060,0090,010,0190,020,023

P2 G L L1mm mm mm

H2

H1H

ØD2

ØD1

ØGL

6382

6382 04 00WP26382 06 00WP26382 08 00WP26382 10 00WP26382 12 00WP2

6382 04 06WP26382 06 04WP26382 06 08WP26382 08 10WP26382 10 12WP2

10101010 5

1010101010

100100100100 50 100100100100100

8,510,513,51619

10,510,513,51619

2326,533,53944,5

26,52533,53944,5

6 7 8 9,510

7 7 8 9,510

15,51721,524,527

1715,521,524,527

151722,526,531

16,51722,52630

0,0030,0030,0040,0090,012

0,0030,0040,0040,0090,012

P2 G H L H1 H2mm mm mm mm mm

468

1012

4668

10

468

1012

648

1012

L

L1

L2

ØD1 ØD3 ØD2

ØG

ØD L1

L

P3

P3

P3

P3

Option

Option

Option

Option

15

P3Option

ØD1 ØD2tube

10101010 5

100100100100 50

8,51113,51619

33,539445358

192121,52727

212525,532,534

1314,519,52326

0,0050,0050,0060,0090,012

468

1012

468

1012

6380 04 00WP26380 06 00WP26380 08 00WP26380 10 00WP26380 12 00WP2

P2 H1 H2 L H Gmm mm mm mm mm

H1

ØGH2

H

ØD1

ØD2

L

6380


ØD1 ØD2stemtube

ØD1 ØD2stemtube

Plug-in 45° elbow with plastic tailpiece

Tube-to-hose stem with plastic tailpiece

Plug with plastic tailpiece

Reducer with plastic tailpiece

Plug-in elbow with plastic tailpiece

stem

Qty

Qty

Qty

Qty Qty

Qty

Qty

Qty

QtyQty


™LIQUIfit

16

ØD

F1

F2

H

C

P3Option

6305 04 10WP26305 04 13WP26305 56 10WP26305 56 13WP26305 08 10WP26305 08 13WP26305 08 17WP26305 60 13WP26305 60 17WP26305 60 21WP26305 62 17WP26305 62 21WP2

mmØD C

C

F1 F2 HP2

5/325/321/41/45/165/165/163/83/83/81/21/2

R1/8R1/4R1/8R1/4R1/8R1/4R3/8R1/4R1/4R3/8R3/8R1/2

7/16 9/16 7/16 9/1611/1611/1611/16 3/4 3/4 3/415/1615/16

10101010101010101010 5 5

100100100100100100100100100100 50 50

3/323/325/325/327/327/327/325/325/32 1/4 1/4 3/8

1818171720202022,122,127,927,927,9

0,0020,0030,0020,0030,0040,0040,0050,0060,0060,0120,0140,017

6305

ØD

ØG

H

LF

C

P3Option

6379

ØD F G H LP2

1010101010

100100100100100

6379 56 10WP26379 56 13WP26379 56 17WP26379 60 13WP26379 60 17WP2

1111111616

22262631,532

1818182626

0,0030,0030,0030,0060,006

1/41/41/43/83/8

R1/8R1/4R3/8R1/4R3/8

3/83/83/81/21/2

mm mm mm

BSPT

BSPT

Fixed elbow - BSPT thread

Male connector - BSPT thread

Frac

tiona

l Inc

h Fi

ttin

gs R

ange

Qty InchQty Inch

Qty InchQty

ØD P3 E F H

3/8 G3/8 3/8 G1/2

ØD P3 E F H

1/4 1/4 3/8 3/8

ØD F1 F2 H 1/4 1/8 1/4 1/4 1/4 3/8 3/8 1/8 3/8 1/4 3/8 3/8 3/8 1/2 1/2 3/8 1/2 1/2

ØD P3 E F H

™LIQUIfit

17

ØD

ØG

H

LF

C

F

H

E

ØD

C

F

H

E

ØD

C

F

H

E

ØD

C

P3

P3

Option

Option

Option

Option

Option

Option

6305

6305 56 11WP26305 56 14WP26305 56 18WP26305 60 11WP26305 60 14WP26305 60 18WP26305 60 22WP26305 62 18WP26305 62 22WP2

ØD

F1

F2

H

C

mm

10101010101010 5 5

100100100100100100100 50 50

1/2 9/16 3/4 3/4 3/4 3/415/1615/1615/16

5/325/32 1/45/32 1/4 1/4 1/4 3/8 3/8

171721,522,122,122,1272828

0,0020,0030,0040,0050,0060,0060,0120,0120,014

P2

6315

6352

6353

6315 56 14WP26315 60 18WP2

6352 60 17WP26352 60 21WP2

6353 60 21WP2

P2

P2

P2

mm

mm

mm

mm

mm

mm

1010

1010

100100

10G1/23/8

100100

100

1212

1212

12

11/1613/16

2227

27

30 36

3636

36

0,0040,009

0,0090,01

0,01

6379

6379 56 11WP26379 56 14WP26379 56 18WP26379 60 14WP26379 60 18WP2

P2ØD P3 F G H L

1/4 1/8 3/81/4 1/4 3/8 1/4 3/8 3/8 3/8 1/4 1/2 3/8 3/8 1/2

1010101010

100100100100100

1111111616

222626,53232,0

1818182626

0,0030,0030,0030,0060,006

mm mm mm

6325

FH

E

ØD

C

6325 56 133WP26325 60 133WP2

mm mmP2ØD

1/43/8

7/16-247/16-24

E

7 7

F

9/16 9/16

H

3132

1010

100100

0,0020,004

NPTF

NPTF

BSPP

BSPP

NPTF

UNS

C

C

C

C

C

C

Fractional Inch Fittings Range Male connector - NPTF thread

Female connector - NPTF thread

Female connector - BSPP thread flat type

Tap connector - BSPP thread cone type

Fixed elbow - NPTF thread

Faucet connector - UNS

Qty

Qty

InchInchQty

Inch

Inch

Inch

Qty

Qty

Qty

Qty

Qty

Qty

QtyQty Inch

Qty inch

™LIQUIfit

18

6309

6308

6303

6321

6309 56 10WP26309 56 13WP26309 56 17WP26309 08 10WP26309 08 13WP26309 08 17WP26309 60 13WP26309 60 17WP26309 62 17WP26309 62 21WP2




L

H

C

ØG

F

ØD

L/2 L/2

C

H

ØD

ØG

F

C

H1

H

L

F

ØD

ØG

C

H

ØD

F

P3

P3

P3

P3

Option

Option

Option

Option

F

1/2 9/1611/16 3/4 3/411/16 3/4 3/415/1615/16

1/2 9/1611/16 3/4 3/4 3/4 3/4 3/415/1615/16

1/41/41/45/165/165/163/83/81/21/2

R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R3/8R1/2

ØD F G H L

1010101010101010 4 4

100100100100100100100100 40 40

P2

11111113,513,513,516162222

282828343434383850,550,5

23,623,623,629,529,529,5343446,546,5

0,0030,0040,0060,2440,2700,2850,0100,0110,0240,027

ØD F G H L/2P2

1/41/41/45/165/165/163/83/81/21/2

R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R3/8R1/2

1/2 9/1611/16 3/4 3/4 3/4 3/4 3/415/1615/16

ØD G H H1 LF

1010101010101010 4 4

100100100100100100100100 40 40

0,0040,0050,0070,0120,0130,0130,0130,0130,0320,035

11111113,513,513,516162222

41,541,541,550505056567575

22,522,523272727303039,539,5

181818232323262635,535,5

P2

1/41/41/45/165/165/163/83/81/21/2

R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R3/8R1/2

1010101010101010 4 4

100100100100100100100100 40 40

11111113,513,513,516162222

28282934343438385050

18181823232326,026,035,535,5

0,0040,0050,0070,0120,0130,0130,0130,0130,0320,035

1/2 9/1611/16 3/4 3/4 3/4 3/4 3/415/1615/16

ØD

1/41/41/45/165/165/163/83/81/21/2

R1/8R1/4R3/8R1/8R1/4R3/8R1/4R3/8R3/8R1/2

H

191919232319252531,531,5

1010101010101010 5 5

100100100100100100100100 50 50

0,0010,0020,0040,0030,0040,0040,0040,0040,0060,009

P2mm

mm mm mm

mm mm mm

mm mm mm mm

BSPT

BSPT

BSPT

BSPT

C

C

C

C

Swivel elbow - BSPT thread

Swivel branch tee - BSPT thread

Swivel male run tee - BSPT thread

Stem adapter - BSPT thread


Qty

Qty

Qty

Qty

Qty

Qty

Qty

Qty Inch

Inch

Inch

Inch

™LIQUIfit

19

6309

6309 56 11WP26309 56 14WP26309 56 18WP26309 60 14WP26309 60 18WP26309 62 18WP26309 62 22WP2

L

H

C

ØG

F

ØD

L/2 L/2

C

H

ØD

ØG

F

C

H1

H

L

F

ØD

ØG

C

H

ØD

F

P3

P3

P3

P3

Option

Option

Option

Option

1/2 9/16 3/4 3/4 3/415/1615/16

1/41/41/43/83/81/21/2

1/81/43/81/43/83/81/2

ØD F G H L

1010101010 4 4

100100100100100 40 40

P2

11111116162222

2828,028,5383850,551,5

23,623,623,6343446,546,5

0,0030,0040,0060,0100,0110,0240,027

mm mm mm

6308

6308 56 11WP26308 56 14WP26308 56 18WP26308 60 14WP26308 60 18WP26308 62 18WP26308 62 22WP2

ØD F G H LP2

1/41/41/43/83/81/21/2

1/81/43/81/43/83/81/2

1/2 9/16 3/4 3/4 3/415/1615/16

1010101010 4 4

100100100100100 40 40

11111116162222

28282938385051

181818262635,535,5

0,0040,0050,0070,0130,0130,0320,035

mm mm mm

6303

6303 56 11WP26303 56 14WP26303 56 18WP26303 60 14WP26303 60 18WP26303 62 18WP26303 62 22WP2

ØD G H H1 LF

1010101010 4 4

100100100100100 40 40

0,0040,0050,0070,0130,0130,0320,035

11111116162222

40,540,541,556567576

22,522,523303039,540,5

18,018,018,0262635,535,5

P2

1/41/41/43/83/81/21/2

1/81/43/81/43/83/81/2

1/2 9/16 3/4 3/4 3/415/1615/16

mm mm mm mm

6321

6321 56 11WP26321 56 14WP26321 56 18WP26321 60 14WP26321 60 18WP26321 62 18WP26321 62 22WP2

F

1/2 1/2 3/4 3/4 3/415/1615/16

ØD

1/41/41/43/83/81/21/2

1/81/43/81/43/83/81/2

H

191919,525253132,5

1010101010 5 5

100100100100100 50 50

0,0010,0020,0040,0040,0040,0060,009

P2mm

NPTF

NPTF

NPTF

NPTF

C

C

C

C

Swivel elbow - NPTF thread

Swivel branch tee - NPTF thread

Swivel male run tee - NPTF thread

Stem adapter - NPTF thread


Qty

Qty

Qty

Qty

Qty Inch

Qty Inch

Qty Inch

Qty Inch

™LIQUIfit

20

6302 04 00WP26302 56 00WP26302 08 00WP26302 60 00WP26302 62 00WP2

6302 56 08WP26302 56 60WP26302 08 60WP26302 60 62WP2

6302

ØG

ØD2

ØDØD1

L

ØG

ØD ØDØD1

ØD2

H

L/2 L/2

P3

P3

P3

Option

Option

Option

G

8,51113,51622

13,5161622

ØD

5/321/45/163/81/2

1/41/45/163/8

5/163/83/81/2

L

192429,53446,5

29,5333446,5

0,0020,0070,0070,0060,018

0,0070,0060,0070,018

P2

10101010 5

10101010

100100100100 50

100100100100

1/43/8

mm mm

6306 04 00WP26306 56 00WP26306 08 00WP26306 60 00WP26306 62 00WP2

6306 56 08WP26306 56 60WP26306 08 60WP26306 08 62WP26306 60 62WP2

6306

L

ØG ØG ØD2ØDØD1

10101010 5

10101010 5

100100100100 50

100100100100 50

8,51113,51622

13,516162222

26,530374257

3741425556

0,0020,0010,0070,0050,016

0,0070,0070,0070,0160,020

ØD

5/321/45/163/81/2

1/41/45/165/163/8

P2 G L

5/163/83/81/21/2

mmmm

6304

6304 04 00WP26304 56 00WP26304 08 00WP26304 60 00WP26304 62 00WP2

6304 60 56WP26304 62 60WP2

P2

10101010 5 10 5

100100100100 50 100 50

ØD

5/321/45/163/81/2

3/81/2

G H L/2

8,51113,51622

1622

2024293447

3447

15,51822,52636

2636

0,0040,0020,0090,0090,009

0,0260,009

mm mm mm

6305 56 10 W P2

ØD2

ØD2

ØD2

ØD1

ØD1

ØD1


How to build part numbers : example 6305 56 10WP2

product range63XX = with pre-coating

65XX = without pre-coating

product typeXX05 = Male connector

XX79 = Fixed elbow

tube o.d.56 : 1/404 : 5/3208 : 5/1660 : 3/862 : 1/2

thread code10 : 1/8 BSPT13 : 1/4 BSPT17 : 3/8 BSPT21 : 1/2 BSPT

coloursW = WhiteG = Grey

packagingP2 = standard packaging P3 = bulk packaging

Union elbow

Union connector

Union Tee

Qty

Qty

Qty

Qty

Qty

Qty

™LIQUIfit

21

P3

P3

P3

P3

Option

Option

Option

Option

6316 04 00WP26316 56 00WP26316 08 00WP26316 60 00WP26316 62 00WP2

6316

ØD

5/321/45/163/81/2

P2

P2

P2

P2

10101010 5

10101010 5

10101010 5

10101010

100100100100 50

100100100100 50

150150150150 50

100100100100

Kmax L1F L2 Tmin

15,5202729,540,5

10,51010,512,517

10,512,515,518,525,4

0,0180,0040,0370,0130,033

5,5 8,514,514,520,5

1315182229

mmmmmmmm mm

6340 04 00WP26340 56 00WP26340 08 00WP26340 60 00WP26340 62 00WP2

6340

ØD

5/321/45/163/81/2

H K L N

8,51113,51622

303644,55367

911,514,51723

0,0040,0030,0130,0100,028

17,522283345

mm mm mm mm

6351

6351 04 00WP26351 56 00WP26351 08 00WP26351 60 00WP2

ØD

5/321/45/163/8

G H

8,51113,516

151621,522,5

0,0010,0010,0030,003

mm mm

ØD ØD

L

HN

K

H

ØD

ØG

ØD ØT

F

K

L1L2

6326

6326 04 00WP26326 56 00WP26326 08 00WP26326 60 00WP26326 62 00WP2

ØD

5/321/45/163/81/2

G L L1

0,0010,0010,0020,0020,004

6 81011,614,7

3036,53542,548,5

15,52217,52221,5

mm mm mm

ØG

ØD L1

L


All plastic nuts are fitted with an integrated O-ring to optimize sealing to a bulkhead wall.

Bulkhead union

Two-way divider

Tube cap

Plug with plastic tailpiece

Qty

Qty

Qty

Qty

Qty

Qty

Qty

Qty

™LIQUIfit

22

6322

6322 56 56WP26322 60 56WP26322 60 08WP26322 60 60WP26322 62 60WP2

P2

1010101010

150150150150150

39,644,95049,858,1

22,324,329,429,237,5

1717222230

0,0010,0010,0010,0020,004

0,280,280,330,400,40

0,320,320,380,450,45

ØD1

1/43/83/83/81/2

L L1 L2ØD2 ØD3mm mm mm

P3

P3

P3

P3

P3

Option

Option

Option

Option

Option

6366

10101010 5

100100100100 50

1/41/45/165/163/8

P2 G

G

L

L

L1

L1

5/16 3/8 3/8 1/2 1/2

111113,51616

22,520,5292230

25,5

414148,548,551

44

0,0010,0020,0040,0040,004

mm

mm

mm

mm

mm

mm

6382

6368

6382 04 00WP26382 56 00WP26382 08 00WP26382 60 00WP26382 62 00WP2

6382 56 60WP2

6368 60 08WP2

10101010 5

10

10

100100100100 50 100

100

5/321/45/163/81/2

1/4

3/8

P2

P2

G H L

5/321/45/163/81/2

3/8

5/16

8,51113,51622

16

16

2330,533,539 49

39

6 10,9 8 9 13

9

15,51821,524,528,5

24,5

151822,526,536

25,5

0,0030,0020,0040,0040,011

0,004

0,004

H1 H2mm mm mm mm mm

6388 56 00WP26388 08 00WP26388 60 00WP26388 62 00WP2

6388

101010 5

100100100 50

1/45/163/81/2

P2

1/45/163/81/2

H1

11 81212,9

H2

2021,52529

L/2

18232532

H

30,533,54251

G

1113,51622

0,0020,0080,0080,020

mm mm mm mm mm

ØD1 ØD2tube

ØD1 ØD2tube

ØD1 ØD2tube

ØD1 ØD2tube

L

L1

ØD2 ØD1ØG

H2

H1H

ØD2

ØD1

ØGL

L

L1

L2

ØD1 ØD3 ØD2

H 2

ØD1

ØD2

ØG

L/2 L/2

H1H

H2

6366 56 08WP26366 56 60WP26366 08 60WP26366 08 62WP26366 60 62WP2

L1

ØD1

L

ØD2 ØG


Tube-to-hose stem with plastic tailpiece

Reducer with plastic tailpiece

Plug-in elbow with plastic tailpiece

Increaser with plastic tailpiece

Plug-in branch tee with plastic tailpiece

stem

stem

stem

stem

inchinch Qty

Qty

Qty

Qty

Qty

Qty

Qty

Qty

Qty

Qty

™LIQUIfit

>

H

K

ØD

3130 56 023130 08 023130 60 023130 62 02

3130 56 033130 08 033130 60 033130 62 03

3130 56 043130 08 043130 60 043130 62 04

3130 56 053130 08 053130 60 053130 62 05

3130 56 103130 08 103130 60 103130 62 10

3130 56 013130 08 013130 60 013130 62 01

ØD

1/45/16 3/8 1/2

8,059,50

10,8014,05

3,254,354,255,75

1,1660,2600,3430,912

3130

3130 06 023130 08 023130 10 023130 12 02

3130 06 033130 08 033130 10 033130 12 03

3130 06 043130 08 043130 10 043130 12 04

3130 06 053130 08 053130 10 053130 12 05

3130 06 103130 08 103130 10 103130 12 10

3130 06 013130 08 013130 10 013130 12 01

ØD

6 81012

7,859,50

10,8012,50

3,154,354,255,10

0,1420,2600,3430,486

3130

ØD

3110

3110 04 003110 06 003110 08 003110 10 00 3110 12 00

3110 04 023110 06 023110 08 023110 10 02 3110 12 02

3110 04 033110 06 033110 08 033110 10 03 3110 12 03

3110 04 043110 06 043110 08 043110 10 04 3110 12 04

3110 04 053110 06 053110 08 053110 10 05 3110 12 05

0,0010,0010,0010,0010,001

100100100100100

100100100100

100100100100

468

1012

3110

3110 04 003110 56 003110 08 003110 60 003110 62 00

3110 04 023110 56 023110 08 023110 60 023110 62 02

3110 04 033110 56 033110 08 033110 60 033110 62 03

3110 04 043110 56 043110 08 043110 60 043110 62 04

3110 04 053110 56 053110 08 053110 60 053110 62 05

0,0010,0010,0010,0010,001

100100100100100

ØD

5/321/45/163/81/2

23

H

H

K

K

mm

mm

mm

mm

Accessories

not compatible with non-return valves and ball valves

not compatible with non-return valves and ball valves

Assembly of the Tamper-Evident Safety Clip

Assemble the clipConnect the tube

Cut the clip with pliersRemove the clipRelease the tube

Evidence of tampering

Tamper-Evident Safety Clip for Inch Tubes

Tamper-Evident Safety Clip for Metric Tubes

Caps for colour-coding circuits for Metric tubes

Caps for colour-coding circuits for Inch tubes

Secure your connections

Qty

Qty

Qty

Qty

™LIQUIfit•

(F)

- C HOT - NSF 51

24

Working specifications

release button

retaining sleeve (nickel-plated brass)

gripping ring (stainless steel)protection sleeve(highly resistant polymer)

seal (EPDM) USDA NSF H1 grease

suitable fluids

working pressureworking temperature

water, beverages, food, CO2... from 1bar to 16 bar maximum

-10°C to +95°C

Specifications

Cartridge is designed for use with Advanced PE tubing.

Force required for insertion

Consult Parker-Legris technical department for other materials

Maximum Insertion Force

Cavity Material:Nylon - PP - PE -Aluminum - Brass

Automatic assembly process

Carstick Cartridges

5/32 1/4 5/16 3/8 1/2

300 daN 300 daN 400 daN

All the materials in contact with the fluid comply with the following certifications:

4 6 8 10 12

®

Ø mm

Ø inch

F

• Advantages

Saves time on assembly in completely safe conditions - one piece cartridge, no risk of losing the seal - self-centering of the cartridge to half of its height within the cavity - protection against contaminants throughout manufacture and assembly Tried-and-tested technology - high technical performance - automatic seal, full flow, vacuum capability Suitable for automated processing (up to 3000 pcs/hour, according to the assembly rate) - automatic self-alignment during insertion - capable of combining dispensing and assembly Tighter mounting tolerances and shallow cavities

•

•

•

•

™LIQUIfit

•

•

ØD1

M

L

6300

6300

G

G

L

L

ØD1 M L

1/46

5/32 8,25 101,54

5/16 12,15 15,528

3/810

1/212

2

2

14,8 19

10.6 12

17,5 2,5 22

mmmm mm

ØD

L

H

6300 06 00

6300 56 00

6300 08 00

6300 08 00

6300 04 00

6300 04 00

6300 10 00

6300 60 00

6300 12 00

6300 62 00

ØD

ØD

ØLmm

ØLmm

Hmm

Hmm

1/4

6

5/32

4 8

8

9,9

9,9

0,002

0,002

0,002

0,002

0,005

0,0055/16

8 13

13

14,7

14,7

0,003

0,003

0,01

0,013/8

10

1/2

12

9,9

10,4

15,5

15,5

19

21,6

11,5

12,2

16,8

16,5

19,4

22,8

L

øD

øG

25

10,314,515,2519,521,3

10,314,515,251921,3

554 629 794 9301038

554 600 794 9301038

50 50 50 50 50

50 50 50 50 50

4 6 8 10 12

5/32 1/45/16 3/8 1/2

ØD

ØD

Carstick® : Assembly

Self-centring up to half of the height of the cartridge

Cartridge in place Tube connected

Depression of seal protection leavesseal locked into cavity

Assembly tool

Please contact us for detailed drawings of cavity dimensions and tolerances.

Carstick®

Carstick®

Cavity dimensions

Cartridge

Metric

Inch

inchmm

Metric

Inch

Qty

Qty

ØD

G2

G1ØD

7992

•

•

™LIQUIfit

•••

- D HOT -

26

ØD P3 G1 G2 L 1/4 3/8

5 5

5050

16,719,8

15,217,8

40,652,8

0,0090,007

P2 mm mm mm

7992 56 00WP27992 60 00WP2

Suitable fluids

Working pressure

Working Temperature

water, beverages

N.R.V. valvesball valves

Single non-return valve

Acetal Non-Return Valves and Ball Valves

Can be used with a variety of chemicals and gases

Body Color: White (Acetal)Seals: Food-grade Nitrile

Features of non-return valves and ball valves

Working pressure and temperature

Refer to chemical compatibility chart on page 28

Option

10 bar

1°C

10 bar10 bar 10 bar

4 bar 7 bar

65ºC20°C

QtyQty

4020

4021

4022

4023

H

ØDLH1

M

ØD

H

L

M

ØDC

F

H

H1

M

ØD

L

F

C

H

LH1M

ØD

L1F

C

™LIQUIfit

27

ØD P3 H H1 L M

mm

mm mm

Option

P2

48,559,1

0,0140,027

0,0160,028

0,0150,022

0.032

47,758,1

10,410,4

38,646,7

ØD P3 L M 1/4 1/4 3/8 3/8

5 50

50 5

50

50 5

538,646,7

8,610,4

57,162,4

57,963,2

F H H1

17,019,0

Option

P2

1/43/8

ØD H H1 L L1 M

1/4 1/4 3/8 3/8

5 5

50 50

50,859,1

20,822,8

23,829,2

48,559,0

F

19,022,8

35,841,9

Option

Option

P2 P3

ØD

3/8

F

26,9

H

24,8

L

62,5

P3

5 50

1/2

M

58,4

P2

mm mm mm mm

mm mm

mm mm mm mm mm mm

mm mm mm mm

4023 60 22WP2

4020 56 00WP24020 60 00WP2

4021 56 14WP24021 60 18WP2

4022 56 14WP24022 60 18WP2

ØD P3 G1 G2 L 1/4 3/8

NPTF

NPTF

NPTF

C

C

C

In-line ball valve - tube-to-tube

In-line ball valve - tube-to-male NPTF

Tank ball valve - tube-to-female NPTF

In-line ball valve - tube-to-female NPTF

Ball Valves

QtyQty

QtyQty

QtyQty

Qty Qty

•

•

•

™LIQUIfit

28

NSF 51�

NSF 61- C HOT -

DI 2002/72/CE DI 2002/95/CE NSF 42/58

4

6

8

10

12

0.75

1.00

1,125

1.50

1.50

±0.10

±0.10

±0.10

±0.10

±0.10

±0.2

±0.2

±0.25

±0.25

±0.3

16

20

30

30

55

16

16

13

13

11

12

12

12

12

9

10

10

7

7

7

4

4

4

4

4

3

3

3

3

3

±0.10

±0.10

±0.10

±0.10

±0.10

1/4

3/8

1/2

0,040

0,062

0,062

±0,008

±0,009

±0,01

1"

1,25"

2,5"

16

13

11

12

12

9

10

7

7

4

4

4

3

3

3

± 0.004

± 0.004

± 0.004

± 0.004

± 0.004

± 0.004

Advantages

Metric Specifications

Inch Specifications

•

•

•

•

•

•

•

Made from high-grade polyethylene, "Advanced PE" tubing ensures the best balancebetween flexibility and pressure/temperature resistance

Resistant to a wide range of aggressive chemical agents

Complies with international regulations and certifications for food and drinking water

Available in nine colours and three diameters

Tested according to the W270 regulation regarding micro-organism growth on materials used in the drinking water industry All colours are UV-stabilized, making it resistant to direct ultraviolet sunlight and ideal for outdoor applications

Silicone-free

Advanced Polyethylene Tubing

* NSF 42/58: 1/4" AND 3/8" approved for 10 bar and 1/2" approved for 8 bar at ambient temperature.

The Advanced PE Tubing is in compliance with :

This tubing is Tested and Certified by NSF International against NSF/ANSI Standard 42/58 for materials and structural integrity requirements*

OD (inch) Wall Thickness (inch) Max. Working Pressure (bar)Max.

Ovality

(inch)

Min. Bend

Radius@

+ 20°C (inch)

Safety

FactorToleranceeToleranceD -15°C to +20°C +40°C +65°C +95°C

OD (mm) Max. Working Pressure (bar)Max.

Ovality

(mm)

Min. Bend

Radius@

+ 20°C (mm)

Safety

FactorToleranceeToleranceD -15°C to +20°C +40°C +65°C +95°C

Wall Thickness (mm)

for inch tubing

Use Parker-Legris "Advanced PE" tubing with LIQUIfit™instant fittings to ensure perfect sealing.

KTW and W270

3000 71 00

H

L

H

N

KØD

Ø 8-10-12mm

K

Ø 4-6mm

H

N

KØD

Ø 3/8 - 1/2

K

Ø 1/4

™LIQUIfit

1099Y56F00

1098Y56F00

1098Y60F00

1096Y62F00

1015Y04F00

1030Y04F00

1015Y06F00

1030Y06F00

1015Y08F00

1015Y10F00

1075Y12F00

1099Y56F01

1098Y56F01

1098Y60F01

1096Y62F01

1015Y04F01

1030Y04F01

1015Y06F01

1030Y06F01

1015Y08F01

1015Y10F01

1075Y12F01

1099Y56F02

1098Y56F02

1098Y60F02

1096Y62F02

1015Y04F02

1030Y04F02

1015Y06F02

1030Y06F02

1015Y08F02

1015Y10F02

1075Y12F02

1099Y56F03

1098Y56F03

1098Y60F03

1096Y62F03

1015Y04F03

1030Y04F03

1015Y06F03

1030Y06F03

1015Y08F03

1015Y10F03

1075Y12F03

1099Y56F04

1098Y56F04

1098Y60F04

1096Y62F04

1015Y04F04

1030Y04F04

1015Y06F04

1030Y06F04

1015Y08F04

1015Y10F04

1075Y12F04

1099Y56F05

1098Y56F05

1098Y60F05

1096Y62F05

1015Y04F05

1030Y04F05

1015Y06F05

1030Y06F05

1015Y08F05

1015Y10F05

1075Y12F05

1099Y56F07

1098Y56F07

1098Y60F07

1096Y62F07

1015Y04F07

1030Y04F07

1015Y06F07

1030Y06F07

1015Y08F07

1015Y10F07

1075Y12F07

1099Y56F09

1098Y56F09

1098Y60F09

1096Y62F09

1015Y04F09

1030Y04F09

1015Y06F09

1030Y06F09

1015Y08F09

1015Y10F09

1075Y12F09

1099Y56F10

1098Y56F10

1098Y60F10

1096Y62F10

1015Y04F10

1030Y04F10

1015Y06F10

1030Y06F10

1015Y08F10

1015Y10F10

1075Y12F10

1000 ft

500 ft

500 ft

250 ft

150 m

300 m

150 m

300 m

150 m

150 m

75 m

1/4"

1/4"

3/8"

1/2"

4 mm

4 mm

6 mm

6 mm

8 mm

10 mm

12 mm

0,170"

0,170"

0,250"

0,375"

2,5 mm

2,5 mm

4 mm

4 mm

5,7 mm

7 mm

9 mm

5,500

3,300

6,300

5,900

1,76

2,86

2,58

4,80

4,05

6,20

5,55

29

•

O.D.I.D.

•

Advanced Polyethylene Tubing: Colours/Diameters/Lengths

ØD

ØD

6

4

Hinch

Hmm

Kinch

Kmm

Ninch

Nmm

Nb of clips per strip

Nb of clips per strip

10,5

9

10

8

12

14

12,5

16,5

12

10,5

13

13,5

14

10,5

10,5

15

12

16,5

8

8

6

7

5

0,009

0,008

0,009

0,010

0,010

• Parker-Legris clips can be used to mount both tubing and fittings • To order clips for mounting a fitting, order by the “O.D. body size” • 1/4" fittings can be mounted in the CLIP 10 000• The clips come complete with 9.5mm long mounting screws

Accessories

Clip strips for tubing and fittings Inch

Clip strips for tubing and fittings Metric

Tube cutter

mm mm25 79 0,029

This tool will cut all resilient plastic tubes from 1/8" to 1/2" diameter. It is designed to give a clean cut at right angles to the tube axis. A spring maintains the cutter in the closed position.

Length

Material Food

Colour

Tube Codes

Part numbers have been chosen using a mnemonic method. Each tube is identified by:

LengthProduct materialO.D.Food regulation approvalColor

Code = length96 = 250 feet = 76,2 m98 = 500 feet = 152,4 m99 = 1000 feet = 304,8 m15 = 150 m30 = 300 m75 = 75 m

Material :Y = polyethylene

Code = O.D. 56 = 1/4"60 = 3/8"62 = 1/2"04 = 4 mm06 = 6 mm08 = 8 mm10 = 10 mm12 = 12 mm

H L

* Black tubing is UV-resistant ** Only available on drum

O.D. tube

Length I.D. tube

clear white

Tubing Metric

Tubing Inch

O.D. = outer diameterI.D. = inner diameter

e = wall thickness

Clip

CLIP 06 00

CLIP 04 00

CLIP 10 00

CLIP 08 00

CLIP 12 00

CLIP 06 00

CLIP 10 00

CLIP 12 00

1/4 0,41

3/8

1/2

0,55

0,65

0,47

0,51

0,55

0,41

0,59

0,65

8

6

5

0,009

0,009

0,010

3000 71 00

1099 Y 56 F 03

O.D.

** *

•••••

•

•

•

•

•

•

•

••••

•

•

••

•••••

•••••

•

™LIQUIfit

30

excellent resistance to abrasion and corrosion due to high phosphorus chemical nickel-plating of individual brass components working temperature from -20° to +150°C full flow fluid passage automatic sealing of BSPT / BSPP versions via an integrated FKM seal in the sub-base materials for body, ring, gripping collet and sub-base : high phosphorus FDA chemical nickel-plated brass; seals : FKM fluoroelastomer authorized by FDA standards pressure: 90% vacuum to 30 bar

resistance to aggressive environments and fluids thanks to 100% stainless steel: 316L stainless steel body, 316L stainless steel washer, 303L stainless steel collet (LF 3800) / 316L stainless steel collet (LF 3900) and FKM ‘O’ ring sealfull bore with no pressure dropworking temperature from -20° to +120°C depending on the type and size of the tubingworking pressure : maximum 30 bar depending on tubing used

working temperature : -20° to +150°Cpressure up to maxi 140 barfixing holes for mounting assemblyvariety of mounting optionswide range of handle options

low to medium pressureworking pressure : 60 bar maximumworking temperature : -20° to +180°Ca large range of plugsdesigned to enable rapid connections of threaded ports to tubing or hose in corrosive environments

When a small bend radius is required for your application, polyurethane crystal tubing is the answer. This tubing resists abrasion and is made of polyether (resistant to humidity and suitable for food contact).FDA-approved FEP fluoropolymer tube provides excellent resistance to aggressive washdown environments and high temperatures, up to 150°CFood-quality braided PVC hose is translucent to enable visual confirmationof fluid flow

You will find the entire Legris offer in our general catalog and at www.legris.com or www.parkerconnectic.com.

Complementary Products

LF 3600, nickel-plated brass, for liquids and gases

LF 3900 / LF 3800, stainless steel for aggressive fluids

Stainless steel accessories

Stainless steel ball valves

Polyurethane, fluoropolymer tubing and braided PVC hose (FDA-approved)

Polyamide tubing

•

• Polyamide Tubing provides good chemical resistance and is recommended for applications which may require higher pressure

•

•

•

™LIQUIfit

31

••••••

whether developed from standard productsor developed hand-in-hand with our customers

competitive pricingtechnical excellencecompact size, etc.

Opening indicatorHole to hang the bag upZipper to close tightlyLabels with product dataProduct vizualisationOn the back: technical information and instructions for use

Visit our new website www.liquifit.net

LIQUIfit™ Website

Standard Premium Packaging

Special Product Capability

••

•••

The FSCE packaging proposal for the tubing is "three-in-one"CompactProtection against dust thanks to the plastic film and the end capEasy to stock and easily identifiable.

•••

Legris has substantial experience in the design and manufacturing of special fittings and assemblies for fluid control :

Our aim is to design, develop and put into series production products or assemblies that are profitable for our customers thanks to :

liquifit - parker · pdf filetel: +358 (0)20 753 2500 [email protected] fr ... +58 212...

Documents