liquitainer paint specification

Version - 1.0 Date – 29/06/11

Paint Specification & Procedure

paulmorgan

PETRO Logo

paulmorgan

Typewritten Text

Size Range 450L through to 110 000L Tanks

paulmorgan

Typewritten Text

paulmorgan

Typewritten Text

of 1

Contents

1. Paint Test Result ……………………………………………………………….1

2. Procedure ……………………………………………………………………….2

3. System ………………….……………………………………………………….3

4. Paint

A. Safety Data Sheet …………………………….…………………….4

B. Technical Data Sheet ………………………………………………8

C. Test Report – ROHS Certificate …………………………………..9

5. Primer

A. Safety Data Sheet …………………………………………………15

B. Technical Data Sheet ……………………………………………..19

C. Test Report – ROHS Certificate ………………………………....20

paulmorgan

PETRO Logo

Owner :- PANUS ASSEMBLY Co.,Ltd. ( Panusnikom-Chonburi )

Coating process :- Epoxy 2k anti-corrosive primer and Non-yellowing 2k Polyurethane topcoat.

Coating substrate :- For coating on new carbon steel by follows blast cleaning standard SSPC SP-10.

: To be cleaning follow up ISO 8501-1 : 2007

: Air dry cured minimum 7 day before testing

: 150 microns. or Depend on Spec. and Color

TEST ITEMS Test Results

Gloss 60o Specular gloss meter 90.2 to 94.7

Scratch Hardness Mitsubishi " uni " Pencil method F

Bending test Bending tester ( Cylindrical mandrel ) 2 mm

Impact test Impact tester (12.8 mm.) ; Falling-weight test

Adhesion test Cross - Cut 2 mm. X 2mm. 100 / 100

Salt spray test 5% NaCl Solution ( 360 hrs. ) No Rust / No blister

QUV test QUV Tester (720 hrs.) Gloss 60o retention 87.2 (Gloss 60

o reduce 3.33% )

No Chalking

Referance : According to Standard of " JIS handbook paint & vanish : 1999 "

Process Test Panel

1) Surface Preparation : Mill scale steel took from PANUS ASSEMBLY + Surface cleanliness as Sa2.5 ( ISO 8501-1 : 2007 ) + Free dust by Air blow

2) Paint Application :

( 50 or depend on Color Shade ) + Air dry 7 Days at Out door (Bake 80oC / 30 - 60 min)

Report date : July 18 , 2011

PAINTING INTERVAL 30oC

Air Dry : 16 Hours

JIS-K-5600-5-6

- Full cured period (30oC)

- Total dry film thickness

Gloss retention

(Bake 80oC / 30 - 60 min)

100 micron

or Depend on Color

PRODUCT NAME

Thai Kansai Paint Co., Ltd.180 Moo.3 Thaeparak Rd. Tumbol Thaeparak , Amphur Muang, Samutprakarn, 10270,Thailand. Tel. 0-2753-2377

PEC ZP PRIMER HB

(2 component)

PUC 7000 No.531 WHITE

(2 component)

50 micron

STANDARD TESTING

> 80

> B

JIS-K-5400-7.6

JIS-K-5600-5-4

( ISO : 2813 )

EQUIPMENT AND MATERIAL

( No crack / peeling)

JIS-K-5600-7-8

( ISO/FDIS : 11507 )

500 g x 50 cm.

(Bake 80oC / 30 - 60 min)

DRY FILM THICKNESS

Air Dry : 7 Days

Std.Spec.

or Depend on Spec.

100 / 100

< 6 mm

Not less than 30 %

JIS-K-5600-7-1 360 Hrs.

( ISO : 2409 )

No Rust / blister

Spray PEC ZP Primer HB ( 100 ) + Air dry Setting 16 Hrs. ( Bake 80oC / 30 - 60 min) + Spray PUC 7000 No.531 White

CONDITION

PROCEDURE

Polyurethane non yellowing

protective topcoat

Epoxy zinc phosphate high-build primer

( ISO : 7253 )

( No crack / peeling)

( ISO/DIS : 15184 )

JIS-K-5600-5-3

( ISO : 6272 )

( ISO : 1519 )

JIS-K-5600-5-1

-Carbon Steel Substrate was surface clanliness as Sa2.5

F

Reported by Komsan Phisnok

( Supervisor.TN-3 )Approved by

Asthasith Sanitjang( Section Manager.TN-3 )

Process

Visual inspection shall be made to confirm that the suface preparation is made in

Check surface profile 50 - 75 microns by surface profile gauge.

PEC ZP Primer HB Conventional Spray

Base : Hardener = 6.4 : 1 by weight Nozzle Size : 1.5 mm.

Thinner : 25 - 30 % by weight. Fluid Pressure : 0.4 kg/cm2 (6 psi)

PUC 7000 White Conventional Spray

Base : Hardener = 5 : 1 by weight Nozzle Size : 1.5 mm.

Thinner : 20 - 25 % by weight. Fluid Pressure : 0.4 kg/cm2 (6 psi)

Completed D.F.T. = 150 microns. & Good film appearance

Remark : Other information of paint ; please see the technical data and SDS for more information on safe handing and application of these products.

Thai Kansai Paint Co.,Ltd.

Application System

accordance with the specification herein ; Follow up cleaning standard SSPC SP-10.

Coating System

Approved by : Paint maker inspector - Thai Kansai Paint's

Update date : July 4 , 2011

Check wet film 92 . become to dry 50 microns. & confirm check D.F.T. 50 .2

- Remove rust, mill scale and other loose material completely by abrasive

blasting (SSPC SP-10).

- Average surface profile of 50 - 75 microns is requiredmust.

Painting Procedure ; Liquitainer Tank

Check wet film 183 . become to dry 100 microns. & confirm check D.F.T 100 .

TOTAL FILM THICKNESS

2

Inspection Method

Abrasive blast

In

spec

tio

n

Paint Name

No. Surface Preparation

1

Must be checked surface profile of 50 - 75 microns.

1

Wet & Dry Film ThicknessNo.

1

2

3

4

Approved byAsthasith Sanitjang(Section.Mgr.TN-3 )

Reported by Komsan phisnok

( Supervisor.TN-3 )

Owner's project :- Panus Assembly Co.,Ltd.

Project title :- Liquitainer Tank Project

Coating substrate :- Carbon steel Tank Fabrication.

Surface

Preparation 2. Abrasive blast clean to a minimum standard of Sa 2.5 (ISO8501-1:1988) or SSPC-SP10.

Application D.F.T. No. of Total D.F.T. Overcoating Thinner ratio

method (Kg/m2) (Lit/m

2) (m/coat) coat (m) Interval (30

oC) (weight %)

1. Epoxy primer Paint PEC ZP Primer HB

(Zinc phosphate primer) Hradener PEC Primer Hardener

Thinner PEC No.10 Thinner

2. Poly Urethane Paint PUC 7000 No.531 White

(White Color) Hradener PUC 7000 Hardener

Thinner PUC 7000 thinner

Recommended 150

Definition D.F.T : Dry Film Thickness SSPC : Steel Structure Painting Council

NACE : Nation Association of Corrosion Engineer ISO 8501-1 :2007: Internation Standard of Surface Preparasion

Remark Paint viscosity depend on spray equipment for necessary application system.

6 hrs. - Indefinite 20 - 250.153Conventional Spray 50 m 1 500.183

5 hrs. - Indefinite 25 - 30

Summary of painting system

Paint system

Process

Average surface profile of 50 - 75 microns is required.

3. The surface to be coated must be cleaned and dry and free from all visible traces of surface contaminants.

0.433

Tra

nsf

orm

er T

ank

1. Remove all wax, oil and grease by solvent cleaning in accordance with the guidelines given by SSPC-SP1.

Conventional Spray 0.305 100 m 1 100

Practical Coverage

Practical coverage is given as including 40% lost for air spray and Thinning ratio exclude cleaning equipments. Coating interval depend on specification.

Thai Kansai Paint Co.,Ltd.180 Moo 3, Teparuk rd.,Muang, Samutprakarn10270 Thailand

Approved byAsthasith Sanitjang

( Section Manager.TN-3 )

Reported by Worawut Intanai

( Asst.Supervisor.TN-3 )

Reported by Komsan phisnok

( Supervisor.TN-3 )

Update date : 5/7/2011 Thai Kansai Paint Co.,Ltd.

Product Name : PUC 7000 NO. 531 WHITE

1. PRODUCT AND COMPANY IDENTIFICATION


Product Type : Polyurethane Enamel

Use : Top coat

Company Name : Thai Kansai Paint Co., Ltd.

Address : 180 Moo 3 Thaeparak Rd., Amphur Muang, Samutprakarn, 10270, Thailand.

Section in Charge : Construction Section Person in Charge : MR. Sayan Mandee

Telephone No. : 0-2753-2377 Fax No. : 0-2753-2775-6

Name of Preparer : Mr. Komsan Phitnok Date Prepared : July 05, 2011

Revision No. : 00

2. HAZARDS IDENTIFICATION

Physical Hazard : Flammable liquid

Health Hazard : Irritating to skin and eyes. May cause damage health.

: May cause allergy or asthma symptoms or breathing difficulties if inhaled.

Comment on Hazard : Extremely flammable liquid, May cause explosion when its vapor becomes dense.

3. COMPOSITION / INFORMATION ON INGREDIENTS

No.

1) Titanium Dioxide

2) Acrylic Resin

3) Methyl Proxital Acetate

4) Xylene

5) Isobutyl Acetate

4. FIRST AID MEASURES

Eye Contact : Immediately flush eyes with plenty of water for at least 15 minutes , Get

medical attention , If eye irritation develops or persists.

Skin Contact : In case of contact with skin, Immediately flush skin with large amount of water

for at least 15 minutes , Remove contaminated clothing , Get medical attention.

Inhalation : If inhaled , remove person to fresh air , if person is not breathing give artificial

respiration ,If breathing is labored give oxygen.

Ingestion : Rinse mouth with fresh water if person is conscious and get medical attention

immediately.

1 - 5

1 - 5

55 - 65

1 - 5

110-19-0

1330-20-7

Component / Chemical Name

SAFETY DATA SHEET ( SDS )

Composition Wt. (%)CAS No.

13463-67-7

-

25 - 35

180-65-6

(1 / 4) T3-RD-034/01



5. FIRE - FIGHTING MEASURES

Extinguishing Media : Use dry chemical powder , Carbon dioxides , foam

Fire Fighting : Fire fighters should wear complete protective clothing including self-contained

Instructions breathing apparatus.

: Shut off supply ; if not possible and no risk, let the fire burn itself out and remove

immediately flammable matter.

: Use specified extinguisher or extinguishing equipments.

6. ACCIDENTAL RELEASE MEASURES

In event of small spill : Absorb with dry sand or other non-flammable matter ,collected and disposed

of as hazardous waste.

In event of large spill : Cover with absorbent materials ( dry sand or other non-flammable matter ).

: Do not absorb in saw-dust or other combustible absorbents.

: Wear proper protectors gloves, respirator, safety goggles, etc.

: Collect leaking liquid in sealable ( metal / plastic ) containers.

: Remove immediately all ignition and the other flammable matters.

: Furnish with extinguisher proper for accidental fire.

: To clean all object contaminated , avoid run off into sewers.

7. HANDLING AND STORAGE

Handling : Handle in good ventilated area.

: Wash thoroughly hand and face after handling.

: Close tightly container with closer necessarily during and after use.

: Wear antistatic suits and shoes , while working.

: Use handtool of spark proof type and ground equipment.

: Wear proper protectors to avoid contact of skin or eyes when handling

open containers.

: Install proper local ventilator and wear proper protector in closed space.

Storage : Keep container closed and avoid direct sunlight.

: Store in good ventilation.

: Store with keeping away from ignition or heat source.

Storage Temperature : Ambient temperature

8. EXPOSURE CONTROLS AND PERSONAL PROTECTION

Engineering controls : Use explosion proof type equipment.

: Install proper exhauster to prevent concentrating of vapor.

: Ground equipment for fluid transfer, pumping and stirring.

: In application in closed space or the like tanks,Install equipment which can

(2 / 4) T3-RD-034/01



sufficiently ventilate even its bottom.

Personal protection

Respiration protection : Wear suitable mark and air-filtering respiratory .

Hand protection : Wear impervious protective PVC gloves to prevent contact with organic solvent.

Eye/Face protection : Wear protective eyewear ( goggles , face shield, or safety glasses ).

Skin&body protection : Wear suitable protective clothing to avoid direct contact of skin.

9. PHYSICAL & CHEMICAL PROPERTIES

Appearance : Liquid Color / Odor : White color

Melting point : NA Boiling point range : 118 - 150 °C

Flash point : 38 oC [ASTM D6450] CC. Auto-ignition point : 315 °C

Lower Explosion limit : 1.0 % (v/v) Upper Explosion limit : 10.5 % (v/v)

Vapour pressure : NA Water solubility : Insoluble

Specific Gravity : 1.21 ± 0.03 g/cm3 pH : NA

Log Kow : NA

Other : NA

10. STABILITY AND REACTIVITY

Chemical stability : Material is stable under normal conditions.

Conditions to Avoid : Heat , ignition sources ( flames , spark , static ).

Materials to Avoid : Strong oxidising agents.

Decomposition products : Emit hazardous gases of Carbon monoxide , Carbon dixide and

Inorganic oxide.

11. TOXICOLOGICAL INFORMATION

No.

1) Methyl Proxital Acetate

2) Xylene

3) Isobutyl Acetate

Sign :

TLV-TWA : Threshold Limit Values for chemical substances in workroom air or an 8-hour workday, 40-hour work week.

ACGIH : The American Conference of Governmental Industrial Hygienists (TLV)

OSHA : The Occupational Safety and Health Administration (PEL = Permissible Exposure Limit )

LD50M : Mouth ( Oral-rat ) mg/kg. LD50S : Dermal ( Skin-rabbit ) mg/kg. LC50 : Inhalation / Vapours ( rat ) mg/l.

12. ECOLOGICAL INFORMATION

LC50 [Inhale]LD50S

50 ppm - > 5,000

100 ppm

150 ppm

PEL (OSHA)Component / Chemical Name

17,400

TLV (ACGIH) LD50M

150 ppm

8,532

4,300

13,400

100 ppm

23.49

21.71

-

1,700

(3 / 4) T3-RD-034/01



: Take cautions in handling because it may contaminate environment when it leaks or spills or it is

dumped. Especially take cautions for product or rinsing water not to flow into the ground ,river.

13. DISPOSAL CONSIDERATIONS

: This material and its container must be disposed of as hazardous waste.

: Dispose of wastes in an approved waste disposal facility.

: Do not empty into drains

14. TRANSPORT INFORMATION

Proper Shipping Name : Paint & Rawmaterial related paint

UN. Class : Class 3

UN. Number : UN. 1263

Packing Group : PG. III

Land Transportation : Accord to each transportation under " ADR/RID code "

Air Transportation : Accord to each transportation under " ICAO/IATA code "

Maritime Transportation : Accord to each transportation under " IMO/IMDG code "

15. REGULATORY INFORMATION

Thai regulation : Hazardous substance ( Praradbunyut 2535 )

: Thai standard of Volatile Organic Content in air

16. OTHER INFORMATION

Note : NA : No data NC : Not Classify

NFPA Code 704 : Health ( Blue ) 2

: Flammability ( Red ) 3

: Reactivity ( Yellow ) 1

: Special data ( White ) -

SDS Effective date : July 05, 2011

Approved By : …………………………………………

( SAYAN MANDEE )

Position : Technical 3 Department Manager

Diamond Label

NF PA

12

3

(4 / 4) T3-RD-034/01

Thai Kansai Paint Co., Ltd.180 Moo.3 Thaeparak Rd. Tumbol Thaeparak ,

Amphur Muang, Samutprakarn, 10270,Thailand. Tel. 0-2753-2377

PUC 7000 Polyurethane Paint

KANSAI PAINT

TECHNICAL DATA

PRODUCT DESCRIPTION

A weather resisting polyurethane enamel base on acrylic polyol resin and non-yellowing

polyisocyanate hardener , has excellent gloss and color retention , excellent durability in

chemical and marine environment , provide hardness and abrasion resistance , fast dry

and good applicable.

USES

As a topcoat for protection of structural steel, tank external or fiber glass surfaces in severely As a topcoat for protection of structural steel, tank external or fiber glass surfaces in severely

corrosive atmospheric environment. Where light-fastness and gloss retention are required.

PHYSICAL PROPERTIES

Vehicle Type Acrylic aliphatic polyurethane paint ( non yellowing ) , high solid

Color White , as specifided.

Hardener Name PUC 7000 HardenerHardener Name PUC 7000 Hardener

Specific gravity 1.20 g/cm3 ( Mixed )

Solids by weight 66 + 1% ( Mixed )

Solids by volume 55 + 1 % ( Mixed )

Flash Point Base = 38 oC , Hardener = 42

oC

Pot life at 20 oC at 30

oC

5 Hrs. 4 Hrs.

Drying time

Surface dry 4 Hrs. 3 Hrs.Surface dry 4 Hrs. 3 Hrs.

Semi dry hard 6 Hrs. 4 Hrs.

Coating interval 8 Hrs. 6 Hrs.

Theoretical coverage 9.10 m2 / Kg / 50 microns 6.50 m2 / Kg / 70 microns

10.90 m2 / L / 50 microns 7.80 m

2 / L / 70 microns

Practical coverage 5.46 m2 / Kg / 50 microns for spray 3.90 m2 / Kg / 70 microns for spray

( Included 40% lost ) 6.54 m2 / L / 50 microns for spray 4.67 m

2 / L / 70 microns for spray

Standard Film ThicknessStandard Film Thickness

Wet Film 92 microns / Coat 129 microns / Coat

Dry Film 50 microns / Coat 70 microns / Coat

APPLICATION METHOD

Tools Apply by brush, roller air spray and aieless spray.

Mixing Ratio Base : Hardener = 20 Kg : 4 Kg ( 5 : 1 By Weight )

Base : Hardener = 16.53 Liters : 3.54 Liters ( 4.7 : 1 By Volume )Base : Hardener = 16.53 Liters : 3.54 Liters ( 4.7 : 1 By Volume )

Thinner PUC 7000 thinner

Thinning Ratio For brush , roller : 5 - 10 % By weight

Viscosity : 40 - 50 sec. / Iwata cup NK-2 / 30 oC

For conventional spray : 20 - 25 % By weight

Viscosity : 14 - 16 sec. / Iwata cup NK-2 / 30 oC

For airless spray : 5 - 10 % By weight

Tip No. : Graco 615, 617

Paint output pressure : 12 -15 MPaPaint output pressure : 12 -15 MPa

Viscosity : 35 - 45 sec. / Iwata cup NK-2 /30 oC

APPLICATION SYSTEM

The surface to be coated must be clean and dry and free from all vissible traces of surface

contaminants.

Metal surfaces : Apply 1-2 Coat of Epoxy primer (Anti-corrosive primer) before apply top coat.

Fiber glass surfaces : Apply 1-2 Coat of Epoxy undercoat ( Primer and under coat ) before apply top coat.

surfaces preparation :

Fiber glass surfaces : Apply 1-2 Coat of Epoxy undercoat ( Primer and under coat ) before apply top coat.

LIMITATIONS

At application temperature below 10 oC , drying and curing time will be significantly impaired.

Product Name : PEC ZP PRIMER HB

1. PRODUCT AND COMPANY IDENTIFICATION


Product Type : Epoxy Enamel

Use : Primer

Company Name : Thai Kansai Paint Co., Ltd.

Address : 180 Moo 3 Thaeparak Rd., Amphur Muang, Samutprakarn, 10270, Thailand.

Section in Charge : Construction Section Person in Charge : MR. Sayan Mandee

Telephone No. : 0-2753-2377 Fax No. : 0-2753-2775-6

Name of Preparer : Mr. Komsan Phitnok Date Prepared : July 05, 2011

Revision No. : 00

2. HAZARDS IDENTIFICATION

Physical Hazard : Flammable liquid

Health Hazard : Irritating to skin and eyes. May cause damage health.

: May cause allergy or asthma symptoms or breathing difficulties if inhaled.

Comment on Hazard : Extremely flammable liquid, May cause explosion when its vapor becomes dense.

3. COMPOSITION / INFORMATION ON INGREDIENTS

No.

1) Cabon black

2) Zinc phosphate

3) Titanium dioxide

5) Extender Pigment

6) Epoxy Resin

7) Xylene

8) Methyl Proxitol Acetate

8) Methyl isobutyl ketone

4. FIRST AID MEASURES

Eye Contact : Immediately flush eyes with plenty of water for at least 15 minutes , Get

medical attention , If eye irritation develops or persists.

Skin Contact : In case of contact with skin, Immediately flush skin with large amount of water

for at least 15 minutes , Remove contaminated clothing , Get medical attention.

Inhalation : If inhaled , remove person to fresh air , if person is not breathing give artificial

respiration ,If breathing is labored give oxygen.

Ingestion : Rinse mouth with fresh water if person is conscious and get medical attention

10 - 15

-

-

35 - 40

20 - 30

1 - 5

10 - 15

108-65-6

180-10-1

5 - 10

1 - 5

1330-20-7

Component / Chemical Name


Composition Wt. (%)CAS No.

1333-86-4

7779-90-0

0 - 1

13463-67-7

(1 / 4) T3-RD-034/01



immediately.

5. FIRE - FIGHTING MEASURES

Extinguishing Media : Use dry chemical powder , Carbon dioxides , foam

Fire Fighting : Fire fighters should wear complete protective clothing including self-contained

Instructions breathing apparatus.

: Shut off supply ; if not possible and no risk, let the fire burn itself out and remove

immediately flammable matter.

: Use specified extinguisher or extinguishing equipments.

6. ACCIDENTAL RELEASE MEASURES

In event of small spill : Absorb with dry sand or other non-flammable matter ,collected and disposed

of as hazardous waste.

In event of large spill : Cover with absorbent materials ( dry sand or other non-flammable matter ).

: Do not absorb in saw-dust or other combustible absorbents.

: Wear proper protectors gloves, respirator, safety goggles, etc.

: Collect leaking liquid in sealable ( metal / plastic ) containers.

: Remove immediately all ignition and the other flammable matters.

: Furnish with extinguisher proper for accidental fire.

: To clean all object contaminated , avoid run off into sewers.

7. HANDLING AND STORAGE

Handling : Handle in good ventilated area.

: Wash thoroughly hand and face after handling.

: Close tightly container with closer necessarily during and after use.

: Wear antistatic suits and shoes , while working.

: Use handtool of spark proof type and ground equipment.

: Wear proper protectors to avoid contact of skin or eyes when handling

open containers.

: Install proper local ventilator and wear proper protector in closed space.

Storage : Keep container closed and avoid direct sunlight.

: Store in good ventilation.

: Store with keeping away from ignition or heat source.

Storage Temperature : Ambient temperature

8. EXPOSURE CONTROLS AND PERSONAL PROTECTION

Engineering controls : Use explosion proof type equipment.

: Install proper exhauster to prevent concentrating of vapor.

(2 / 4) T3-RD-034/01



: Ground equipment for fluid transfer, pumping and stirring.

: In application in closed space or the like tanks,Install equipment which can

sufficiently ventilate even its bottom.

Personal protection

Respiration protection : Wear suitable mark and air-filtering respiratory .

Hand protection : Wear impervious protective PVC gloves to prevent contact with organic solvent.

Eye/Face protection : Wear protective eyewear ( goggles , face shield, or safety glasses ).

Skin&body protection : Wear suitable protective clothing to avoid direct contact of skin.

9. PHYSICAL & CHEMICAL PROPERTIES

Appearance : Liquid Color / Odor : Gray

Melting point : NA Boiling point range : 98 - 152 °C

Flash point : 28 oC [ASTM D6450] CC. Auto-ignition point : 315 °C

Lower Explosion limit : 1.0 % (v/v) Upper Explosion limit : 12.7 % (v/v)

Vapour pressure : NA Water solubility : Insoluble

Specific Gravity : 1.60 ± 0.03 g/cm3 pH : NA

Log Kow : NA

Other : NA

10. STABILITY AND REACTIVITY

Chemical stability : Material is stable under normal conditions.

Conditions to Avoid : Heat , ignition sources ( flames , spark , static ).

Materials to Avoid : Strong oxidising agents.

Decomposition products : Emit hazardous gases of Carbon monoxide , Carbon dixide and

Inorganic oxide.

11. TOXICOLOGICAL INFORMATION

No.

1) Xylene

2) Methyl Proxitol Acetate

3) Methyl isobutyl ketone

Sign :

TLV-TWA : Threshold Limit Values for chemical substances in workroom air or an 8-hour workday, 40-hour work week.

ACGIH : The American Conference of Governmental Industrial Hygienists (TLV)

OSHA : The Occupational Safety and Health Administration (PEL = Permissible Exposure Limit )

LC50 [Inhale]LD50S

100 ppm 100 ppm

TLV (ACGIH) LD50M

100 ppm

50 ppm

50 ppm 400

PEL (OSHA)Component / Chemical Name

4,300

8,532

2,080

-

21.7

23.49

1.60

5,000

1,700

(3 / 4) T3-RD-034/01



LD50M : Mouth ( Oral-rat ) mg/kg. LD50S : Dermal ( Skin-rabbit ) mg/kg. LC50 : Inhalation / Vapours ( rat ) mg/l.

12. ECOLOGICAL INFORMATION

: Take cautions in handling because it may contaminate environment when it leaks or spills or it is

dumped. Especially take cautions for product or rinsing water not to flow into the ground ,river.

13. DISPOSAL CONSIDERATIONS

: This material and its container must be disposed of as hazardous waste.

: Dispose of wastes in an approved waste disposal facility.

: Do not empty into drains

14. TRANSPORT INFORMATION

Proper Shipping Name : Paint & Rawmaterial related paint

UN. Class : Class 3

UN. Number : UN. 1263

Packing Group : PG. III

Land Transportation : Accord to each transportation under " ADR/RID code "

Air Transportation : Accord to each transportation under " ICAO/IATA code "

Maritime Transportation : Accord to each transportation under " IMO/IMDG code "

15. REGULATORY INFORMATION

Thai regulation : Hazardous substance ( Praradbunyut 2535 )

: Thai standard of Volatile Organic Content in air

16. OTHER INFORMATION

Note : NA : No data NC : Not Classify

NFPA Code 704 : Health ( Blue ) 2

: Flammability ( Red ) 3

: Reactivity ( Yellow ) 1

: Special data ( White ) -

SDS Effective date : July 05, 2011

Approved By : …………………………………………

( Mr. SAYAN MANDEE )

Position : Asst. General Manager

Diamond Label

NF PA

12

3

(4 / 4) T3-RD-034/01

Thai Kansai Paint Co., Ltd.180 Moo.3 Thaeparak Rd. Tumbol Thaeparak ,

Amphur Muang, Samutprakarn, 10270,Thailand. Tel. 0-2753-2377

PEC ZP PRIMER HB

Epoxy High Solid Zinc Phosphate Primer

ข้อมูลทางเทคนิคTECHNICAL DATA

KANSAI PAINT

PRODUCT DESCRIPTION

A two component highbuild epoxy zinc phosphate anti-corrosive primer. It gives excellent

properties such as an anti-corrosive to sea water, moisture, chemicals, petroleum solvents,

aliphatic solvents and weather resistance.

USES

Design to be Primer or undercoat anti-corrosive protection of steel structure surfaces

prepared by abrasive blast cleaning.prepared by abrasive blast cleaning.

PHYSICAL PROPERTIES

Vehicle Type Epoxy resin.

Color Grey

Hardener Name PEC Primer Hardener

Specific gravity 1.42 g/cm3 (Mixed)

Solids by weight 73 + 1 % (Mixed)

Solids by volume 55 + 1 % (Mixed)Solids by volume 55 + 1 % (Mixed)

Flash Point Base = 28 oC , Hardener = 34

oC

Pot life at 20 oC at 30

oC

5 Hrs. 3 Hrs.

Drying time

Surface dry 2 mins 1 Hr.

Semi dry hard 6 Hrs. 4 Hrs.

Coating interval 7 Hrs. 5 Hrs.Coating interval 7 Hrs. 5 Hrs.

Theoretical coverage 5.13 m2 / Kg / 75 microns 3.85 m

2 / Kg / 100 microns

7.28 m2 / L / 75 microns 5.46 m

2 / L / 100 microns

Practical coverage 3.08 m2 / Kg / 75 microns for spray 2.31 m

2 / Kg / 100 microns for spray

( Included 40% loss ) 4.37 m2 / L / 75 microns for spray 3.28 m

2 / L / 100 microns for spray

Standard Film Thickness

Wet Film 137 microns / Coat 183 microns / Coat

Dry Film 75 microns / Coat 100 microns / Coat

APPLICATION METHOD

Tools Apply by brush, roller, air spray and airless spray.

Mixing Ratio Base : Hardener = 24 Kg : 3.72 Kg ( 6.4 : 1 By Weight )

Base : Hardener = 16 Lit : 4 Lit ( 4 : 1 By Volume )

Thinner PEC thinner No.10

Thinning Ratio For brush : 0 - 5 % by weight

For conventional spray : 25 - 30 % by weight

Viscosity : 18 - 20 sec./ Iwata cup NK-2 /30 oCViscosity : 18 - 20 sec./ Iwata cup NK-2 /30 oC

For airless spray : 5 - 10 % by weight

Tip No. : Graco 621, 623

Paint output pressure : 14 -17 MPa

Viscosity : 35 - 45 sec./ Iwata cup NK-2 /30 oC

APPLICATION SYSTEM

Abrasive blast clean to a minimum standard of Sa2.5 (ISO8501-1:2007) or SSPC-SP10.

Average surface profile of 50-75 microns is required.

surfaces preparation :

Average surface profile of 50-75 microns is required.

The surface to be coated must be clean and dry and free from all visible traces of surface

contaminants.

LIMITATIONS

Application at temperature below 10 oC, drying and curing time will be significantly impaired.

liquitainer paint specification

Documents