list of journals_iitg
DESCRIPTION
List of journals IITGTRANSCRIPT
-
159
Annexure VI: Research Activities
Annexure VI A: Details of Journal Publications and Citations (1996 Dec 2013)
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
1 A Sahai, B John and G. Natarajan The role of fineness ratio in the design of minimum-drag axisymmetric forebodies in hypersonic flows
2013 Journal of Spacecraft and Rockets in press - - - 0
2 A. Bhowmik, R. Singh, R. Repaka, S.C. Mishra Conventional and newly developed bioheat transport models in vascularized tissues: A review
2013 Journal of Thermal Biology 38 - 107 125 2
3 A. Ghosh, N. Barman, H. Chattopadhyay, and S. Bag
Modelling of heat transfer in submerged arc welding process 2013
Proceedings of IMechE, Part B: Journal of Engineering Manufacture
227 10 1467 1473 0
4 A. Mishra and U.S. Dixit Determination of thermal diffusivity of the material, absorptivity of the material and laser beam radius during laser forming by inverse heat transfer
2013 Journal of Machining and Forming Technologies
5 3/4. 207 226 0
5 A. Sinha, K. A. Raman, H. Chattopadhyay and G. Biswas
Effects of different orientations of winglet arrays on the performance of plate-fin heat exchangers
2013 International Journal of Heat and Mass Transfer
57 - 202 214 1
6 A. Trivedi, D. Srinivasan, D. Sharma, C. Singh
Evolutionary Multi-objective Day-Ahead Thermal Generation Scheduling in Uncertain Environment
2013 Power Systems, IEEE 28 2 1345 1354 0
7 Anbarasu S, Muthukumar P, Mishra SC
Thermal modeling of Mg2 2013 Ni based solid state hydrogen storage reactor Heat Transfer Engin Heat Transfer Engineering
in press - - - 0
-
160
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
8 Anil Kumar Deepati, Pankaj Biswas, M. M. Mahapatra & N. R. Mandal
A Study on Friction Stir Welding of 12mm Thick Aluminum Alloy Plates 2013
Journal of Marine science and applications
in press - - - 0
9 B John, Sarath G, V Kulkarni and G Natarajan
Performance Comparison of Flux Schemes for Numerical Simulation of High-Speed Inviscid Flows
2013 Progress in Computational Fluid Dynamics
in press - - - 0
10 B John, V Kulkarni and G Natarajan Shock wave-boundary layer interactions in hypersonic flows 2013
International Journal of Heat and Mass Transfer
70 - 81 90 0
11 B. J. Bora, B. K. Debnath, N. Gupta, N. Sahoo and U. K. Saha
Investigation on the flow behaviour of a venturi type gas mixer designed for dual fuel diesel engines
2013 International Journal of Engineering Technology and Advanced Engineering
3 - 202 209 0
12 B. K. Debnath U. K. Saha and N. Sahoo
A theoretical route towards the estimation of second law potential of an emulsified palm biodiesel run diesel engine
2013 ASCE Journal of Energy Engineering in press - - - 0
13 B. K. Debnath, B. J. Bora, N. Sahoo and U.K. Saha
Influence of emulsified palm biodiesel as pilot fuel diesel engine 2013
ASCE Journal of Energy Engineering in press - - - 0
14 B. K. Debnath, N. Sahoo and U. K. Saha Thermodynamic analysis of a variable compression ratio diesel engine running with palm oil methyl ester
2013 Energy Conversion and Management 65 - 147 154 4
15 B. K. Debnath, N. Sahoo and U. K. Saha
Adjusting the operating characteristics to improve the performance of an emulsified palm oil methyl ester run diesel engine
2013 Energy Conversion and Management 69 - 191 198 4
-
161
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
16 B. K. Debnath, U. K. Saha UK and N. Sahoo An experimental way of assessing the application potential of emulsified palm biodiesel towards alternative diesel
2013 Journal of Engineering for Gas Turbines and Power
136 2 1 2 0
17 B. Nayak, S.K. Dwivedy and K.S.R.K. Murthy
Dynamic stability of magnetorheological elastomer based adaptive sandwich beam with conductive skins using FEM and the harmonic balance method
2013 International Journal of Mechanical Sciences 77 - 205 216 0
18 B. Ray, G. Biswas, A. Sharma, and S.W.J. Welch
CLSVOF method to study consecutive drop impact on liquid pool 2013
International Journal of Numerical Methods for Heat & Fluid Flow
23 - 141 158 1
19 Bhardwaj, S., Dalal, A. Analysis of Natural Convection Heat Transfer and Entropy Generation inside Porous Right-angled Triangular Enclosure
2013 International Journal of Heat and Mass Transfer
65 - 500 513 1
20 Bibin J. and Kulkarni V. N Investigation for energy deposition technique for drag reduction at hypersonic speeds
2013 Applied Mechanics and Materials 367 - 222 227 0
21 Bora BJ, Debnath BK, Gupta N, Saha UK, and Sahoo N
Investigation on the Flow Behaviour of a Venture Type Gas Mixer for Dual Fuel Diesel Engines
2013 International Journal of Emerging Technology and Advanced Engineering
3 - 202 209 0
22 C. Patel, Sumitesh Das, R. Ganesh Narayanan
CAFE modeling, neural network modeling, and experimental investigation of friction stir welding, Proc. of the IMecheE
2013 Part C: Journal of Mechanical Engineering Science
227 6 1164 1176 0
23 D. A. Perumal, A. K. Dass Application of Lattice Boltzmann method for incompressible viscous flows 2013
Applied Mathematical Modelling 37 6 4075 4092 1
-
162
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
24 D. Bandopadhya A Lambert W Function Approach for Solution of Delay Response of an Active Actuator via Pseudo-Rigid Body Modeling Technique
2013 International Journal of Research in Mathematics
1 1 1 7 0
25 D. Biswal, D. Bandopadhaya and S.K. Dwivedy
Investigation and evaluation of effect of dehydration on vibration characteristics of silver-electroded ionic polymermetal composite actuator
2013 Journal of Intelligent Material Systems and Structures
24 10 1197 1212 0
26 D. J. Bordoloi and R. Tiwari Optimization of Controller Parameters of Active Magnetic Bearings in Rotor-Bearing Systems.
2013 Advances in Vibration Engineering 12 4 319 327 0
27 D. J. Bordoloi and R. Tiwari
Optimization of Support Vector Machine based Multi-Fault Classification with Evolutionary Algorithms from the Time Domain Vibration Data of Gears.
2013 Journal of Mechanical Engineering Science 227 11 2428 2439 0
28 D. Sharma, A. Trivedi, D. Srinivasan, L. Thillainathan
Multi-agent modeling for solving profit based unit commitment problem 2013 Applied soft computing 13 8 3751 3761 0
29 D. Soren, P. Gupta, M. Ravi Sankar, S. P. Rajagopal, V. Ganesh, A.V. Lanjewar
Tribomechanical and Tribochemical Wear of Human Dental Enamel 2013
International Journal of Advanced Materials Manufacturing and Characterization
3 1 119 125 0
-
163
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
30 Debnath BK, Saha UK, Sahoo N
Effect of Compression Ratio and Injection Timing on the Operating Characteristics of a Diesel Engine Run on Palm Oil Methyl Ester
2013 Proc. of the IMechE, PartA: Journal of Power and Energy
227 - 368 382 0
31 DN Basu, ND Patil, S Bhattacharyya and PK Das
Hydrodynamics of a Natural Circulation Loop in a Scaled-down Steam Drum-Riser-Downcomer Assembly
2013 Nuclear Engineering and Design 265 - 411 423 0
32 DN Basu, S Bhattacharyya and PK Das
Dynamic Response of a Single-phase Rectangular Natural Circulation Loop to Different Excitations of Input Power
2013 International Journal of Heat and Mass Transfer
65 - 131 142 0
33 DN Basu, S Bhattacharyya and PK Das
Influence of Geometry and Operating Parameters on the Stability Response of Single-phase Natural Circulation Loop
2013 International Journal of Heat and Mass Transfer
58 - 322 334 1
34 DN Basu, S Bhattacharyya and PK Das
Development of a Unified Model for the Steady-state Operation of Single-phase Natural Circulation Loops
2013 International Journal of Heat and Mass Transfer
62 - 452 462 0
35 Eswaran M, Virk AS, and Saha UK Numerical Simulation of 2-D and 3-D Sloshing Waves in a Regularly and Randomly Excited Container
2013 Journal of Marine Science and Application
12 - 298 314 0
36 Ghatule P., Kore S. D. Coupled 3D Finite Element Modeling of Electromagnetic Free Expansion of Al Tube
2013 Internaional Journal of Advanced Materials Manufacturing and Characterisation
3 1 95 98 0
-
164
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
37 Girish O., Reddy N., Jammy S. and Kulkarni V. N
Conjugate Heat Transfer Analysis for Hypersonic Flow Over Finite Thickness Flat Plate
2013 Journal of Aerospace Engineering 26 4 708 714 0
38 H. K. Mohanty, M. M. Mahapatra, P. Kumar, Biswas P. and N. R. Mandal.
Predicting the effects of tool geometries on friction stirred aluminum welds using artificial neural networks and fuzzy logic techniques
2013 International Journal of Manufacturing Research (IJMR)
8 3 296 312 0
39 H. Sarangi, K.S.R.K. Murthy and D. Chakraborty
Experimental verification of optimal strain gage locations for the accurate determination of mode I stress intensity factors
2013 Engineering Fracture Mechanics 110 - 189 200 0
40 I. Chakraborty, G. Biswas and P.S. Ghoshdastidar
A coupled level-set and volume-of-fluid method for the buoyant rise of gas bubbles in liquids
2013 International Journal of Heat and Mass Transfer
58 - 240 259 1
41 K. Das and S.C. Mishra Estimation of tumor characteristics in a breast tissue with known skin surface temperature
2013 Journal of Thermal Biology 38 - 311 317 0
42 K. Das, R. Singh and S.C. Mishra Numerical analysis for determination of the presence of a tumor and estimation of its size and location in a tissue
2013 Journal of Thermal Biology 38 - 32 40 2
43 Kalita P., Clifford M., Kalita K., Saha U. K., and Mahanta P.
Characterization and analysis of thermal response of rice husk for gasification applications
2013 Journal of Renewable and Sustainable Energy
5 1 13119 13134 0
-
165
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
44 Kant R. and Joshi S.N. Finite Element Simulation of Laser Assisted Bending with Moving Mechanical Load
2013 International Journal of Mechatronics and Manufacturing Systems (Inderscience)
6 4 351 366 0
45 Kant R. and Joshi S. N. Numerical Modeling and Experimental Validation of Curvilinear Laser Bending of Magnesium Alloy Sheets
2013 Journal Of Engineering Manufacture in press - - -
46 Karthick Selvam, Muthukumar P, Linder M, Mertz R, Kulenovic R
Measurement of thermochemical properties of some metal hydrides - titanium (Ti), misch metal (Mm) and lanthanum (La) based alloys
2013 Int. J. Hydrogen Energy 38 - 5288 5301 0
47 Kirtania, S. and Chakraborty, D. Fracture behavior of carbon nanotube-based composites with a broken fiber using multi-scale finite element modeling
2013 Journal of Computational and Theoretical Nanoscience
11 3 676 684 0
48 Kirtania, S. and Chakraborty, D. Analysis of Carbon Nanotube-Reinforced Alumina Nanocomposites with a Broken Fiber
2013 Journal of Reinforced Plastics and Composites
in press - - - 0
49 Konwar R. S., Kalita K., Banerjee A., and Khoo W. K. S.
Electromagnetic Analysis of a bridge con-figured winding cage induction machine using finite element method
2013 Progress in Electromagnetics Research B
48 - 347 373 0
50 L. Roy and S. K. Kakoty Optimum Groove Location of Hydrodynamic Journal Bearing Using Genetic Algorithm
2013 Advances in Tribology in press - 1 13 0
51 L.-M. Armstrong, S.Gu, K.H.Luo, P. Mahanta Multifluid Modeling of the Desulfurization Process within a Bubbling Fluidized Bed Coal Gasifier
2013 AIChE Journal 59 6 1952 1963 0
-
166
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
52 Likhendra Prasad, Muthukumar P Design and optimization of labscale sensible heat storage prototype for solar thermal power plant application
2013 Solar Energy 97 - 217 229 0
53 M. B. Patil, K. Kalita, S. K. Kakoty Performance Analysis of Gas Foil Bearing with Different Foil Pivot Configuration
2013 Advances in Mechanical Engineering
in press - 1 9 0
54 M. Baruah and S. Bag Numerical modelling of heat transfer and fluid flow in laser microwelding 2013 International Journal of Mechatronics and Manufacturing Systems
6 13 310 334 0
55 M. Chandrasekaran, M. Muralidhar and U.S. Dixit
Online Optimization of Multipass Machining Based on Cloud Computing 2013
International Journal of Advanced Manufacturing
65 1 239 250 1
56 M. Ravi Sankar, K. Abhinay, P. Sirisha
Experimental Investigations on Tribological Characteristics of Titanium alloy based Biomaterials for Medical Applications
2013 International Journal of Mechanical and Industrial Engineering
in press - - -
57 M. Ravi Sankar, S. K. Choudhury
Experimental Study and Modeling of Machining with Dry compressed air, flood, and minimum quantity cutting fluid cooling techniques
2013 Procedia CIRP in press - - -
58 Mohit Lal and R. Tiwari Quantification of Multiple Fault Parameters in Flexible Turbo-Generator Systems with Incomplete Rundown Data.
2013 Mechanical Systems and Signal Processing 41 1-2. 546 563 0
59 Mukesh Kumar, Satish V. Kailas, R. Ganesh Narayanan
Influence of external weld flash on the in-plane plane-strain formability of friction stir welded sheets
2013 Journal of Strain Analysis for Engineering Design
48 - 376 385 0
-
167
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
60 Muthukumar P, Satheesh A Analysis of crossed vant Hoff metal hydride based heat pump 2013 Int. J. Hydrogen Energy 38 - 11415 11420 0
61 N R Mandal, Sharat Kumar and Pankaj Biswas
Distortion Measurement of Ship Blocks using Photogrammetry 2013
Journal of Ship Production and Design in press - - - 0
62 N. Naresh Kumar, P. S. Rama Sreekanth, S. Kanagaraj
Effect of gamma-irradiation on thermal properties of MWCNTs reinforced high density polyethylene
2013 Advanced Nanomaterials and Nanotechnology
143 - 408 418 0
63 N. Shanmugapriya, C. Somayaji, S. Kanagaraj Optimization of Ceria-Zirconia solid solution based on OSC measurement by cyclic heating process
2013 Procedia Engineering 64 - 1235 1241 0
64 N. Yadaiah and S. Bag Effect of heat source parameters in thermal and mechanical analysis of linear GTA welding process
2013 ISIJ International 52 11 2069 2075 0
65 N. Yadaiah and S. Bag Role of oxygen as surface active element in linear GTA welding process 2013 Journal of Materials Engineering and Performance
22 11 3199 3209 0
66 N.K. Mishra, P. Muthukumar, S.C. Mishra
Performance tests on medium-scale porous radiant burners for LPG cooking applications
2013 International Journal of Emerging Technology and Advanced Engineering
3 - 126 130 0
67 N.S.Priya, C. Somayaji, S.Kanagaraj Oxygen storage capacity of CexZr1-xO2
2013 (0.4x0.8) solid solution using thermo-gravimetric analysis
Advanced Materials Research 747 - 579 582 0
-
168
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
68 P S Rama Sreekanth, N Ravindra Reddy, Mangala Lahkar, S Kanagaraj
Biocompatibility studies on MWCNTs reinforced UHMWPE nanocomposites 2013
Trends in Biomaterials & Artificial Organs 21 - 1 9 0
69 P S Rama Sreekanth, S Kanagaraj Restricting the ageing degradation of the mechanical properties of gamma irradiated UHMWPE using MWCNTs
2013 Journal of the Mechanical Behavior of Biomedical Materials
21 - 57 66 0
70 P S Rama Sreekanth, S Kanagaraj
Assessment of bulk and surface properties of medical grade UHMWPE based nanocomposites using Nanoindentation and microtensile testing
2013 Journal of the Mechanical Behavior of Biomedical Materials
18 - 140 151 3
71 P. Janaki Ramulu, R. Ganesh Narayanan
Experimental evaluation and prediction of forming limit of FSW blanks made of AA 6061 T6 sheets at different weld orientations and weld locations
2013 Materialwissenschaft und Werkstofftechnik 44 6 527 540 0
72 P. Kalita, U. K. Saha, P. Mahanta,
Effect of biomass blending on hydrodynamics and heat transfer behavior in a pressurized circulating fluidized bed unit
2013 International Journal of Heat and Mass Transfer
60 1 531 541 0
73 P. Kalita, U. K. Saha, P. Mahanta Parametric study on the hydrodynamics and heat transfer along the riser of a pressurized circulating fluidized bed unit
2013 Experimental Thermal and Fluid Science 44 - 620 630 1
-
169
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
74 P. Kumari, S Kapuria Extended Kantorovich 3D solution and performance of 2D laminate theories for edge effects in smart piezolaminated structures
2013 Proceedings of the Indian National Science Academy, Accepted for Publication, 2013
in press - - - 0
75 P. Kumari, S Kapuria, RKND Rajapakse
Three-dimensional extended Kantorovich solution for Levy-type rectangular laminated plates with edge effects
2013 Composite Structure 107 1 167 176 0
76 P. Muthukumar, Shyamkumar Development of a novel porous radiant burner for LPG cooking applications 2013 Fuel 112 - 562 566 0
77 P. S. Rama Sreekanth, S. Kanagaraj Influence of MWCNTs and gamma irradiation on thermal characteristics of medical grade UHMWPE
2013 Bulletin of Material Science in press - - - 0
78 P.Kalita, M.J.Clifford, K.Jiamjiroch, K.Kalita, P.Mahanta, U.K. Saha
Characterization and analysis of thermal response of rice husk for gasification applications
2013 Journal of Renewable and Sustainable Energy
5 1 13119 13134 0
79 Peetala R. K., Sahoo N. and Kulkarni V. N. Prediction of short duration transient surface heat flux using various analytical techniques
2013 Heat transfer Asian Research 42 6 530 543 0
80 R. Kumar and N. Sahoo Dynamic calibration of K-type coaxial thermocouple for transient measurement 2013 ASME International Journal of Heat Transfer
135 12 1 7 0
81 R. S. Desai and S. Bag Influence of displacement constraints in thermomechanical analysis of laser micro-spot welding process
2013 Journal of Manufacturing Processes
in press - - - 0
-
170
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
82 R. Tiwari, D. J. Bordoloi, S. Bansal and S. Sahoo
Application of Wavelet Analysis in Multi-class Fault Diagnosis of Gear using SVM
2013 International Journal of Condition Monitoring & Diagnostic Engineering
16 3 17 24 0
83 R.P. Chopade, V. Mohan, R. Mayank, R. Uppaluri and S.C. Mishra
Simultaneous retrieval of parameters in a transient conduction-radiation problem using differential evolution algorithm
2013 Numerical Heat Transfer, Part A 63 - 373 395 0
84 Randive, P., Dalal, A. Capillarity-induced Resonance of Blobs in a 3-D Duct: Lattice Boltzmann Modelling
2013 International Journal of Heat and Mass Transfer
65 - 635 648 0
85 Roy S, and Saha UK Review on the Numerical Investigations into the Design and Development of Savonius Wind Rotors
2013 Renewable and Sustainable Energy Reviews
24 - 73 83 0
86 Roy S, and Saha UK Review of Experimental Investigations into the Design, Performance and Optimization of the Savonius Rotor
2013 Proc. of the IMechE, PartA: Journal of Power and Energy
227 - 528 542 0
87 Roy S, and Saha UK Computational Study to Assess the Influence of Overlap Ratio on Static Torque Characteristics of a Vertical Axis Wind Turbine
2013 Procedia Engineering 51 - 694 702 0
88 S Samanta and DN Basu
Modeling of a Solar Assisted Water-LiBr Absorption Refrigeration System for Summer Airconditioning of an Office Room
2013 International Journal of Emerging Technology and Advanced Engineering
3 3 368 375 0
-
171
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
89 S. Arun, Mrutyunjay Maharana, S. Kanagaraj
Optimizing the processing conditions for the reinforcement of epoxy resin by multi walled carbon nanotubes
2013 Journal of Nanotechnology in press - - - 0
90 S. Arun, P S Rama Sreekanth, S. Kanagaraj
Mechanical characterization of PMMA/SWNTs bone cement using Nanoindenter
2013 Materials Technology: Advanced Performance Materials
in press - - - 0
91 S. Arun, S. Kanagaraj Effect of reinforcement and processing methods in PP/MWCNTs nanocomposites
2013 Advanced Materials Research 747 - 575 578 0
92 S. Bag Recent advances in laser microwelding 2013 KIRAN: A Bulletin of Indian Laser Association
24 2 23 31 0
93 S. Bansal, S. Sahoo, and R. Tiwari and D. J. Bordoloi
Multiclass Fault Diagnosis in Gears Using Support Vector Machine Algorithms Based on Frequency Domain Data.
2013 Measurement 40 - 3469 3481 0
94 S. Kapuria, P. Kumari Extended Kantorovich method for three-dimensional piezoelasticity solution of edge effects in hybrid plates
2013 Proceeding of Royal Society A 469 2151 1471 2946 0
95 S. P. Rajagopal, V. Ganesh, A.V. Lanjewar, M. Ravi Sankar, P. Gupta, D. Soren
Past and Current Status of Hybrid Electric Discharge Machining (H-EDM) Processes
2013 International Journal of Advanced Materials Manufacturing and Characterization
3 1 111 118 0
96 S. S. Gautam, and R. A. Sauer An Energy-momentum-conserving Temporal Discretization Scheme for Adhesive Contact Problems
2013 International Journal of Numerical Methods in Engineering
93 10 1057 1081 1
-
172
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
97 S.C. Mishra and H. Sahai
Analyses of non-Fourier conduction and radiation in a cylindrical medium using lattice Boltzmann method and finite volume method
2013 International Journal of Heat and Mass Transfer
61 - 41 45 2
98 Sarkar, S., Ganguly, S., Dalal, A. Buoyancy Driven Flow and Heat Transfer of Nanofluids Past a Square Cylinder in Vertically Upward Flow
2013 International Journal of Heat and Mass Transfer
59 - 433 450 2
99 Sarkar, S., Ganguly, S., Dalal, A., Saha, P., Chakraborty, S.
Mixed Convective Flow Stability of Nanofluids past a Square Cylinder by Dynamic Mode Decomposition
2013 International Journal of Heat and Fluid Flow (in press)
44 - 624 634 0
100 Satya Sekhar B, Muthukumar P Studies on metal hydride based single-stage heat transformer 2013 Int. J. Hydrogen Energy 38 - 7178 7187 1
101 Satya Sekhar B, Muthukumar P Performance tests on a double-stage metal hydride based heat transformer 2013 Int. J. Hydrogen Energy 38 - 15428 15437 0
102 Satya Sekhar B, Muthukumar P and Suresh P
Performance investigations of the metal hydride based hydrogen storage devices 2013 Int J Hydrogen Energy 38 - 9570 9577 0
103 Satyajit Panda and Gavhane G. Sopan
Nonlinear analysis of smart functionally graded annular sector plates using cylindrically orthotropic piezoelectric fiber reinforced composite
2013 International Journal of Mechanics and Materials in Design
9 - 35 53 1
104 U. Barman, A.K. Sen, and S. C. Mishra Theoretical and numerical investigations of an electroosmotic flow micropump with interdigitated electrodes
2013 Microsystem Technologies 20 1 157 168 0
-
173
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
105 V. Satheeshkumar, R. Ganesh Narayanan
Investigation on the influence of adhesive properties on the formability of adhesive bonded steel sheets, Proc. of the IMecheE
2013 Part C: Journal of Mechanical Engineering Science
in press - - - 0
106 V. Waghole and R. Tiwari Optimization of Needle Roller Bearing Design using Novel Hybrid Methods 2013
Mechanism and Machine Theory 72 - 71 85 0
107 V. Yadav, J. Thakuria, A.K. Singh and U.S. Dixit
An approximate fast finite element analysis of temperature distribution in rolling
2013 Int. J. Mechatronics and Manufacturing Systems
6 4 381 396 0
108 A Pal, D. Bandyopadhyay, G. Biswas and V. Eswaran
Enhancement of Heat Transfer Using Delta-Winglet Type Vortex Generators with a Common Flow Up Arrangement
2012 Numerical Heat Transfer Part A 61 - 912 928 1
109 A. Banerjee Simulation of SMA wire actuator behavior under arbitrary thermo-mechanical Loading
2012 Smart Materials and Structures 21 - 0
110 A. N. Reddy and G. K. Ananthasuresh
A numerical approach to determine the sufficiency of given boundary data sets for uniquely estimating interior elastic properties
2012 Inverse Problems in Science and Engineering
20 7 1057 1077 0
111 Abhishek T. Dhumal, R. Ganesh Narayanan, G. Saravana Kumar
Simulation based expert system to predict the tensile and deep drawing behavior of tailor welded blanks
2012 International Journal of Modeling, Identification and Control
15 3 164 172 0
112 ARIJIT Biswas&P. Mahanta Design and experimental analysis of condenser for the production of bamboo vinegar
2012 International Journal of Applied Research in Mechanical Engineering
2 2 79 86 0
-
174
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
113 B. B. Sahoo U.K. Saha and N. Sahoo Demonstration of dual fuel technology Gas and diesel for the future 2012
International Journal of Engineering Science Research
3 - 559 565 0
114 B. B. Sahoo, N. Sahoo and U. K. Saha Effect of H2
2012 :CO ratio in syngas on the
performance of a dual fuel diesel engine operation
Applied Thermal Engineering 49 - 131 146 0
115 B. B. Sahoo, U. K. Saha U.K. and N. Sahoo
Diagnosing the effects of pilot fuel quality on availability terms in a biogas run dual fuel diesel engine
2012 International Journal of Exergy 10 1 77 93 0
116 B. K. Debnath, U. K. Saha and N. Sahoo Effect of hydrogen-diesel quantity variation on brake thermal efficiency of a dual fuelled diesel engine
2012 Journal of Power Technologies 92 1 55 67 0
117 B. K. Debnath, U. K. Saha and N. Sahoo
Effect of compression ratio and injection timing on the performance characteristics of a diesel engine running on palm oil methyl ester, Journal of Power and Energy
2012 Proceedings of the Institution of Mechanical Engineers (IMechE, Part A)
227 - 368 382 0
118 B. Nayak, S. K. Dwivedy and K.S.R.K Murthy
Vibration analysis of a three-layer MRE embedded sandwich beam with conductive skins using FEM, Proceedings of the Institution of Mechanical Engineers
2012 Part C, Journal of Mechanical Engineering Science
227 4 714 729 0
119 B. Nayak, S.K. Dwivedy and K.S.R.K. Murthy Multi-frequency excitation of magnetorheological elastomer-based sandwich beam with conductive skins
2012 International Journal of Non-linear Mechanics 47 5 448 460 2
-
175
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
120 B. Nayak, S.K. Dwivedy and K.S.R.K. Murthy
Vibration analysis of a three-layer MRE embedded sandwich beam with conductive skins using finite element method
2012
Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science
227 - 4714 4729 0
121 B. Ray, G. Biswas and A. Sharma Oblique Drop Impact on Deep and Shallow Liquid 2012
Commun. Comput. Phys. 11 - 1386 1396 0
122 B. Ray, G. Biswas and A. Sharma Bubble pinch-off and scaling during liquid drop impact on liquid pool 2012 Physics of Fluids 24 -
082108-1 11 0
123 B. Ray, P.D.S. Reddy, D. Bandyopadhyay, A. Sharma, S. Qian and G. Biswas
Surface Instability of a Thin Electrolyte Film Undergoing Coupled Electroosmotic and Electrophoretic Flows in a Microfluidic Channel
2012 Electrophoresis 32 - 3257 3267 2
124 B. Ray, P.D.S. Reddy, D. Bandyopadhyay, S.W. Joo, A. Sharma, S. Qian and G. Biswas
Instabilities in Free-surface Electroosmotic Flows 2012
Theory of Computational Fluid Dynamics
26 - 311 318 3
125 B.Buragohain, P.Mahanta, V.S. Moholkar
Performance correlations for biomass gasifiers using semi-equilibrium non-stoichiometric thermodynamic models
2012 International Journal of Energy Research 36 5 590 618 3
126 Bhinder, A. P. S., Sarkar, S., Dalal, A. Flow over and Forced Convection Heat Transfer around a Semi-circular Cylinder at Incidence
2012 International Journal of Heat and Mass Transfer
55 19-20 5171 5184 2
-
176
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
127 Biswas P., Kumar D. A. and Mandal N. R. Friction stir welding of aluminum alloy with varying tool geometry and process parameters
2012 Proc. IMechE Part-B, J. Engineering Manufacture
226 4 641 648 1
128 Biswas Pankaj, Mandal N. R. and Sha O.P. Numerical and dimensional analysis for prediction of line heating residual deformations
2012 Journal of Marine Science and Application
9 - 14 21 0
129 C. Patel, R. Ganesh Narayanan, Sumitesh Das
Predicting the grain size and strength during friction stir welding by Cellular automata based finite element (CAFE) analysis
2012 International Journal of Advanced Manufacturing Systems
14 2 27 34 0
130 C. Shravan and R. Tiwari Identification of Stiffness and Periodic Breathing Forces of A Transverse Switching Crack in a Laval Rotor.
2012 Fatigue and Fracture of Engineering Materials and Structures
36 - 254 269 1
131 Chakraborty, D., Rathore, P. K. and Roy T.
Optimal Actuators Locations in Smart Fibre Reinforced Polymer Structures Using Genetic Algorithm
2012 Applied Mechanics and Materials 110-116 - 1278 1283 0
132 D. A. Perumal, G. V. S. Kumar, A. K. Dass Lattice Boltzmann Simulation of Viscous flow past elliptical cylinder 2012 CFD letters 4 3 127 139 1
133 D. A. Perumal, G. V. S. Kumar, A. K. Dass Numerical Simulation of Viscous Flow over a Square Cylinder Using Lattice Boltzmann Method
2012 ISRN Mathematical Physics 2012 - 1 16 0
134 D. Biswal, D. Bandopadhaya and S.K. Dwivedy
Electro-Mechanical and Thermal Characteristics of Silver-Electroded Ionic Polymer Metal Composite (IPMC) Actuator
2012
Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical
226 6 1427 1436 0
-
177
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
Engineering Science
135 D. Chatterjee, G. Biswas and S. Amiroudine
Mixed Convection Heat Transfer from an In-line Row of Square Cylinders in Cross-Flow at Low Reynolds Number
2012 Numerical Heat Transfer Part A 61 - 891 911 1
136 D. K. Biswal, D. Bandopadhya , and S. K. Dwivedy
Preparation and experimental investigation of thermo-electro-mechanical behavior of Ag-IPMC Actuator
2012 International Journal of Precision Engineering and Manufacturing
13 5 777 782 1
137 D. K. Biswal, D. Bandopadhya , and S. K. Dwivedy
Fabrication and thermo mechanical analysis of pure silver-electrode ionic polymer-metal composite (IPMC) actuator
2012 Applied Mechanics and Materials 110-116 - 1199 1206 1
138 D. Sharma, K. Deb and N. N. Kishore Customized Evolutionary Optimization Procedure for Generating Minimum Weight Compliant Mechanisms
2012 Engineering Optimization 46 1 39 60 0
139 D.S. Kumar, A.K. Dass and A. Dewan Multiple Stable Solutions for Two- and Four-Sided Lid-Driven Cavity Flows Using FAS Multigrid Method
2012 Engineering e-Transaction 7 - 96 106 0
140
David Santosh Christopher , P. Rajesh Kanna, G. Madhusudhana, P. Venkumar, H. A. Mohammed
Numerical Investigation of Heat Transfer from Two-Dimensional Sudden Expansion Flow using Nanofluids
2012 Numerical Heat Transfer, Part A 61 - 527 546 0
-
178
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
141
David Santosh Christopher, G. R. Madhusudhana, P. Venkumar, P. Rajesh Kanna, H. A. Mohammed
Numerical investigation on laminar flow due to sudden expansion using nanofluids
2012 Journal of Computational and Theoretical Nanoscience
9 - 2217 2227 8
142 Deep Sharma and S. K. Dwivedy
Design and Fabrication of an Autonomous Mobile Robot for Obstacle Avoidance and Path Planning in partially known Environment
2012 Advanced Material Research 403-408 - 3917 3924 0
143 DN Basu, ND Patil, S Bhattacharyya and PK Das
Experimental Investigations of Droplet Carryover from the Separator Drum of an Air-lift Loop Simulating a Scaled-down AHWR
2012 Experimental Thermal and Fluid Sciences 42 - 163 173 1
144 DN Basu, S Bhattacharyya and PK Das
Performance Comparison of Rectangular and Toroidal Natural Circulation Loops under Steady and Transient Conditions
2012 International Journal of Thermal Sciences 57 - 142 151 3
145 G. Biswas, H. Chattopadhyay and A. Sinha
Augmentation of Heat Transfer by Creation of Streamwise Longitudinal Vortices using Vortex Generators
2012 Heat Transfer Engineering 33 - 406 426 4
146 Ganesh, N. and Balakrishnan, N. A h--adaptive algorithm using residual error estimates for fluid flows 2012
Communications in Computational Physics 13 2 461 478 1
-
179
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
147 H. K. Mohanty, M. M. Mahapatra, Biswas P. and N. R. Mandal
Modeling the Effects of Tool Shoulder and Probe Profile Geometries on Friction Stirred Aluminum Welds Using Response Surface Methodology
2012 J. Marine Sci. Appl. 11 4 493 504 0
148 H. K. Mohanty, M. M. Mahapatra, Biswas Pankaj and Mandal N. R.
Effect of tool shoulder and pin probe profiles on friction stirred aluminum weldsA comparative study
2012 Journal of Marine Science Application 11 - 200 207 1
149 H. K. Mohanty, M. M. Mahapatra, P. Kumar, Biswas Pankaj and N R Mandal
Study on the effect of tool profiles on temperature distribution and material flow characteristics in friction stir welding
2012 Proc. IMechE Part-B, J. Engineering Manufacture
226 9 1527 1535 1
150 H. Sarangi, K.S.R.K. Murthy and D. Chakraborty
Optimum strain gage locations for accurate determination of the mixed mode stress intensity factors
2012 Engineering Fracture Mechanics 88 - 63 78 0
151 H. Sarangi, K.S.R.K. Murthy and D. Chakraborty
Extent of three Parameter Zone and Optimum Strain Gage Location for Eccentric Cracked Configurations
2012 Applied Mechanics and Materials 110-116 - 127 134 0
152 Hegde G. M., Kulkarni V. N,. Nagabhoopathy and Reddy K.P.J
Structure and morphology studies of chromium film at elevated temperature in hypersonic environment
2012 Bulletin of Material Science 35 3 341 345 0
153 J. K. Doley, S.D. Kore Studies on Temperature Distribution in Electromagnetic Welding Process 2012 ASTM 1 1 73 84 0
154 J.K. Doley, S.D. Kore Fully Coupled Numerical Simulation of Electromagnetic Forming 2012 Key Engineering Materials 504-506 - 1201 1206 0
-
180
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
155 Jagu S. Rao and R. Tiwari Optimum Design and Analysis of Axial Hybrid Magnetic Bearings Using Multi-Objective Genetic Algorithms.
2012 International Journal for Computational Methods in Engineering Science and Mechanics
13 - 10 27 0
156 Kalita P, Saha UK, and Mahanta P
An Experimental Investigation of Hydrodynamics and Heat Transfer Characteristics of Biomass in a Pressurized Circulating Fluidized Bed
2012 International Energy Journal 13 - 63 74 1
157 Kirtania, S. and Chakraborty, D. Multi-scale modeling of carbon nanotube reinforced composites with a fiber break 2012 Materials and Design 35 - 498 504 0
158 L. Boriwal, M. M. Mahapatra, and P. Biswas
Modelling and optimizing the effects of process parameters on galvanized steel sheet resistance spot welds
2012 Proc. IMechE Part B: J. Engineering Manufacture
226 4 664 674 0
159 M. Hazarika, U.S. Dixit, S. Deb
A method for fine tuning the membership grades assigned by experts: an application to burr height estimation in drilling
2012
Journal of Manufacturing Technology Research, Journal of Manufacturing Technology Research
4 1-2. 75 87 0
160 M. Lal and R. Tiwari Multi-fault Identification in Simple Rotor-Bearing-Coupling Systems based on Forced Response Measurements.
2012 Mechanism and Machine Theory 51 - 87 109 4
161 M. Ravi Sankar, V. K. Jain, and J. Ramkumar
Effect of Abrasive Medium ingredients on finishing of Al alloy and Al alloy/SiC Metal Matrix Composites using Rotational Abrasive Flow Finishing
2012 Applied Mechanics and Materials 110-116 - 1328 1335 0
-
181
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
162 M. Ravi Sankar, V. K. Jain, J. Ramkumar, Y. M. Joshi
Dependence of R-AFF process on Rheological Characteristics of Soft styrene based organic polymer abrasive medium
2012 International Journal of Manufacturing Technology Research
4 1-2. 89 104 0
163
M. Sivasankar, K. Siva Sankar Reddy, T. Benarjee, S. K. Dwivedy, D. Chakraborty
Wear Analysis of Acetabular Cup for Daily Activities 2012
Indian Journal of Biomechanics 3 1-2. 13 19 0
164
M. Sivasankar, K. Siva Sankar Reddy, T. Benarjee, S. K. Dwivedy, D. Chakraborty
Wear Analysis of Ace tabular Cup for Daily Activities 2012
Indian Journal of Biomechanics 3 1-2. 13 19 0
165 Madhusudhana Gavara Natural convection in a vertical channel with arrays of flush-mounted heaters on opposite conductive walls
2012 Numerical Heat Transfer, Part A 62 - 111 135 0
166 Madhusudhana Gavara Natural convection in a series of thermally interacting cavities with wall mounted heaters
2012 Numerical Heat Transfer, Part A 62 - 861 883 0
167 Madhusudhana Gavara Asymmetric forced convection of nanofluids in a channel with symmetrically mounted rib heaters on opposite walls
2012 Numerical Heat Transfer, Part A 62 - 884 904 0
168 Madhusudhana Gavara, P. Rajesh Kanna
Study of conjugate natural convection between vertical coaxial rectangular cylinders
2012 International Communications in Heat and Mass Transfer
39 - 904 912 0
-
182
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
169 Madhusudhana Gavara, Pradip Dutta, K.N. Seetharamu
Mixed convection adjacent to non-isothermal vertical surfaces 2012
International Journal of Heat and Mass Transfer
55 - 4580 4587 0
170 Manas Das, V.K. Jain, P.S Ghoshdastidar
Nanofinishing of flat workpieces using Rotational - Magnetorheological Abrasive Flow Finishing (R-MRAFF) Process
2012 International Journal of Advanced Manufacturing Technology
62 - 405 420 0
171 Manas Das, V.K. Jain, P.S Ghoshdastidar CFD simulation and experimental investigations into magnetic field assisted nano-finishing process
2012 Proc. IMechE Part B: J Engineering Manufacture
226 7 1143 1158 0
172 Mazumdar A., Talukdar S., and Kalita K. Comparative Analysis of an Elastic 2 Degree of Freedom Vehicle Ride Model with a Rigid 2 Degree of Freedom Model
2012 International Journal of Research in Engineering and Technology
2 10 11 24 0
173 Muthukumar P, Lakshmi DVN Thermodynamic analysis of a thermally operated cascade sorption heat pump for continuous cold generation
2012 International Journal of Energy and Environment
4 1 161 174 0
174 Muthukumar P, Patel KS, Sachan P, Singhal N
Computational study on metal hydride based three-stage hydrogen compressor 2012
International Journal of Hydrogen Energy 37 - 3797 3806 2
175 Muthukumar P, Singhal A, Bansal GK. Thermal modeling and performance analysis of industrial-scale metal hydride based hydrogen storage container
2012 International Journal of Hydrogen Energy 37 - 14351 14364 2
176 Narendra Singh, Gaurav Chand, S. Kanagaraj
Investigation of thermal conductivity and viscosity of carbon nanotubes-Ethylene glycol nanofluids
2012 Heat Transfer Engineering 33 9 821 827 0
-
183
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
177 P S Rama Sreekanth, N Naresh Kumar, S Kanagaraj
Effect of MWCNT on mechanical properties of g -irradiated UHMWPE during shelf ageing process
2012 Advanced Materials Research 410 - 160 163 0
178 P S Rama Sreekanth, N Naresh Kumar, S Kanagaraj
Improving post irradiation stability of high density polyethylene by multi walled carbon nanotubes
2012 Composites Science and Technology 72 - 390 396 5
179 P. Janaki Ramulu, R. Ganesh Narayanan
Weld zone representation methods during the stretching of friction stir welded blanks with dissimilar sheet thickness: A study using numerical simulations
2012 Materialwissenschaft und Werkstofftechnik 43 3 241 252 1
180 P. Janaki Ramulu, R. Ganesh Narayanan, Satish V. Kailas, Jayachandra Reddy
Formability evaluation of FSW blanks made of aluminum sheet: Influence of welding speed and tool rotation speed
2012 Advanced Materials Research 410 - 287 290 3
181 P. Janaki Ramulu, R. Ganesh Narayanan, Satish V. Kailas, Jayachandra Reddy
Internal defect and process parameter analysis during friction stir welding of Al 6061 sheets
2012 International Journal of Advanced Manufacturing Technology
65 9-12. 1515 1528 3
182 P.S. Robi, Sanjib Banerjee1 and A. Srinivasan
Deformation Mechanism Maps for Al-Cu-Mg alloys microalloyed with Tin 2012
Advanced Materials Research 410 - 283 286 0
183 Perumalla Janaki Ramulu, Satish V. Kailas, R. Ganesh Narayanan
Influence of tool rotation speed and feed rate on forming limit of friction stir welded AA6061-T6 sheets
2012 Proc. of the IMecheE, Part C: Journal of Mechanical Engineering Science
227 3 520 541 2
-
184
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
184 R. Das, U.S. Dixit, S. Deb Effect of extrusion ratio, die land length and lubrication on hardness and surface roughness in multi-hole extrusion
2012 Journal of Manufacturing Technology Research
4 1-2. 35 47 0
185 R. Das, U.S. Dixit and S. Deb An experimental study on the effect of lubrication, die land length and vibration in multi-hole extrusion process
2012 Journal of Machining and Forming Technologies
4 1 141 153 0
186 R. Kumar and N. Sahoo Design, fabrication and sensitivity analysis of the resistance temperature detector thin film sensors
2012 International Journal of Mechanical and Industrial Engineering
2 4 20 25 0
187 R. Kumar, N. Sahoo and V. Kulkarni
Conduction based calibration of handmade platinum thin film heat transfer gauges for transient measurements
2012 International Journal of Heat and Mass Transfer
55 9-11 2707 2713 1
188 R. Kumar, P. Jayesh and N. Sahoo Analysis of one dimensional inverse heat conduction problem: A Review 2012
International Journal of Mechanical & Industrial Engineering
3 1 2231 2239 0
189 R. P. Chopade, S.C. Mishra, P. Mahanta, S. Maruyama, and A. Komiya
Uniform thermal conditions on 3-D object: Optimal power estimation of panel heaters in a 3-D radiant enclosure
2012 International Journal of Thermal Sciences 51 1 73 76 2
190 R. Tiwari, K. Sunil Kumar and R. S. Reddy An Optimum Design Methodology of Tapered Roller Bearing Using Genetic Algorithms.
2012 International Journal for Computational Methods in Engineering Science and Mechanics
13 - 108 127 1
-
185
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
191 R.P. Chopade, S.C. Mishra, P. Mahanta, S. Maruyama
Estimation of power of heaters in a radiant furnace for uniform thermal conditions on 3-D irregular shaped objects
2012 International Journal of Heat and Mass Transfer
55 15-16 4340 4351 1
192 Rajiv Sharma, S Kanagaraj Prepation and characterization of surfactant coated Ce-Zr nanoparticles and nanofuel
2012 Journal of ASTM International (ASTM Special Technical Publication)
1567 - 64 78 0
193 Ravi Kant, R. Ganesh Narayanan
In-plane testing behavior of adhesive-bonded steel sheets: Influence of sheet surface roughness adhesive thickness, and bonding width
2012 Journal of Testing and Evaluation 40 2 97 106 0
194 Ravindra S. Saluja, R. Ganesh Narayanan, Sumitesh Das
Cellular automata finite element (CAFE) model to predict the forming of friction stir welded blanks
2012 Computational Materials Science 58 - 87 100 0
195 S Bhattacharyya, DN Basu and PK Das Two-phase Natural Circulation Loops: A Review of the Recent Advances 2012
Heat Transfer Engineering 33 4-5. 461 482 3
196 S. Bag Adverse effect of surface active element transport in conduction mode laser welding process
2012 KIRAN: A Bulletin of Indian Laser Association
23 2 6 10 0
197 S. Bag, D. V. Kiran, Arshad A. Syed and A. De
Efficient estimation of volumetric heat source in fusion welding process simulation
2012 Welding in the World 56 11-12. 88 97 0
198 S. Banerjee, P. S. Robi and A. Srinivasan Deformation Processing Maps for Control of Microstructure in Al-Cu-Mg Alloys Microalloyed with Sn
2012 Metallurgical and Materials Transactions A
43 - 3834 3849 1
-
186
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
199 S. Ganguly, A. Garg, A. Pasricha and S. K. Dwivedy
Control of pneumatic artificial muscle system through experimental Modelling 2012 Mechatronics 22 8 1135 1147 1
200 S. Ghosh, A.K. Das, A.A. Vaidya, S.C. Mishra and P.K. Das
Numerical study of dynamics of bubbles using lattice Boltzmann method 2012
Industrial & Engineering Chemistry Research
51 - 6364 6376 1
201 S. Ghosh, P. Patil, S.C. Mishra, A.K. Das and P.K. Das
3-D lattice Boltzmann model for asymmetric Taylor bubble and Taylor drop in an inclined channel
2012 Engineering Applications of Computational Fluid Mechanics
6 - 383 394 1
202 S. K. Dwivedy and B. Pratiher Reply to the "Comments on Parametric instability of a cantilever beam with magnetic field and periodic axial load
2012 Journal of Sound and Vibration 331 6 1465 1466 0
203 S. K. Singh and R. Tiwari Detection and Localisation of Multiple Cracks in a Stepped Shaft. 2012
Fatigue and Fracture of Engineering Materials and Structures
36 - 85 91 0
204 S. Kapuria, P. Kumari Boundary layer effects in Levy-type rectangular piezoelectric composite plates using a coupled efficient layerwise theory
2012 European Journal of Mechanics A 36 - 1 19 2
205 S. Kapuria, P. Kumari Multi-term extended Kantorovich method for three dimensional elasticity solution of laminated plates
2012 Journal of Applied Mechanics (ASME) 79 6 1 9 0
206 S. Khandekar,M. Ravi Sankar, V. Agnihotri, J. Ramkumar
Nano cutting fluid for enhancement of meal cutting performance 2012
Materials and Manufacturing Processes
27 - 963 967
-
187
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
207 S. Mahto and U.S. Dixit Comparative Dynamic Response of an Optimized Single Link Flexible manipulator
2012 Applied Mechanics and Materials 110-116 - 4748 4756 0
208 S. S. Gautam, and P. M. Dixit Numerical Simulation of Ductile Fracture in Cylindrical Tube Impacted Against a Rigid Surface
2012 International Journal of Damage Mechanics 21 3 341 371 0
209 S. S. Gautam, and R. K. Saxena A Numerical Study of Strain Rate and Temperature in Taylor Rod Impact Problem
2012 International Journal of Structural Changes in Solids
4 1 1 11 0
210 S. Sarkar, S. Ganguly and G. Biswas, Mixed Convective Heat Transfer of Nanofluids Past a Circular Cylinder in Cross Flow in Unsteady Regime
2012 International Journal of Heat and Mass Transfer
55 - 4783 4799 6
211 S.C. Mishra and H. Sahai
Analyses of non-Fourier heat conduction in 1-D cylindrical and spherical geometry - an application of the lattice Boltzmann method
2012 International Journal of Heat and Mass Transfer
55 - 7015 7023 5
212 S.C. Mishra and R.R. Vernekar Analysis of transport of collimated radiation in a participating media using the lattice Boltzmann method
2012 Journal of Quantitative Spectroscopy and Radiative Transfer
113 - 2088 2099 1
213 S.C. Mishra, M.Y. Kim and S. Maruyama
Performance evaluation of four radiative transfer methods in solving multi-dimensional radiation and/or conduction heat transfer problems
2012 International Journal of Heat and Mass Transfer
55 - 5819 5835 0
-
188
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
214 S.C. Mishra, R. Muthukumaran, S. Maruyama
Comparison of the thermal effects of the transport of a short-pulse laser and a multi-pulse laser through a participating medium
2012 International Journal of Heat and Mass Transfer
55 - 5583 5596 0
215 S.D. Kore, P.N. Vinod, S. Kumar, M. R. Kulkarni
Study of Wavy Interface in Electromagnetic Welds 2012
Key Engineering Materials 504-506 - 729 734 0
216 S.R. Deepak and G. Ananthasuresh Static balancing of a four-bar linkage and its cognates 2012
Mechanism and Machine Theory 48 - 62 80 2
217 S.R. Deepak and G. K. Ananthasuresh Perfect static balance of linkages by addition of springs but not auxiliary bodies
2012 Journal of Mechanisms and Robotics 4 2 1 12 2
218 S.S. Mohapatra, P. Mahanta Performance evaluation of quality drying in a natural convection grain dryer 2012
Applied Mechanics and Materials 110-116 - 2094 2100 1
219 Sahoo BB, Saha UK, and Sahoo N Diagnosing the Effects of Pilot Fuel Quality on Exergy Terms in a Biogas Run Dual Fuel Diesel Engine
2012 International Journal of Exergy 10 1 77 93 0
220 Sanjib Banerjee, P.S. Robi and A. Srinivasan Prediction of Hot Deformation Behavior of Al5.9%Cu0.5%Mg Alloys with Trace Additions of Sn
2012 Journal of Material Science 47 2 929 948 3
221 Sanjib Banerjee1, P. S. Robi1, and A. Srinivasan
Calorimetric study of precipitation kinetics of alcumg and alcumg0.06 wt.% sn alloys
2012 Metals and Materials International 16 4 523 531 4
222 Saptarshi Mandal, S Kanagaraj Reduction of emission in a diesel engine using nanofuel - Ceria nanoparticle dispersed diesel
2012 Journal of ASTM International, (ASTM Special Technical Publication)
1567 - 79 91 0
-
189
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
223 Sarkar, S., Ganguly, S., Dalal, A.
Analysis of Entropy Generation during Mixed Convective Heat Transfer of Nanofluids past a Square Cylinder in Parallel Flow
2012 ASME Journal of Heat Transfer 134 - 1 8 0
224 Satya Sekhar B, Muthukumar P Performance Analysis of a Metal Hydride Based Heat Transformer 2012 Int Energy Journal 13 - 29 44 0
225 Satyajit Panda and M. C. Ray
Active damping of nonlinear vibrations of functionally graded laminated composite plates using vertically/obliquely reinforced 1-3 piezoelectric composite
2012 Journal of Vibration and Acoustics 134 2 1 2 0
226 Sekhar BS, Muthukumar P, Saikia R
Tests on a metal hydride based thermal energy storage system 2012
International Journal of Hydrogen Energy 37 - 3818 3824 3
227 Sharma A., Ranavat V. S., Kulkarni V. N and Saha U. K.
Numerical investigations on flow control over a blended wind body transonic aircraft
2012 Journal of Aircrafts 49 2 532 545 0
228 Sharma AS, Rawat VS, Kulkarni VN, and Saha UK
Numerical Investigations on Flow Control Over a Blended Wing Body Transonic Aircraft Using Synthetic Jet Actuator Arrays
2012 AIAA Journal of Aircraft 49 2 532 545 2
229 Sura J., Menezes V., Kirthyvasan A. and Kulkarni V. N
Estimation of skin friction drag on a model in hypersonic shock tunnel 2012
Applied Mechanics and Materials 232 - 234 239 0
230 Susanta Kumar Dey, R. Ganesh Narayanan, G. Saravana Kumar
Computing the tensile behavior of tailor welded blanks made of DP steel by neural network based expert system
2012 International Journal of Computer Integrated Manufacturing
25 2 158 176 0
-
190
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
231 Susanta Kumar Dey, R. Ganesh Narayanan, G. Saravana Kumar
Prediction of tensile behavior of DP 590 Steel Tailor Welded Blanks by ANN 2012
Advanced Materials Research 383-390 - 1019 1026 0
232 V. K. Jain, Ajay Sidpara, M. Ravi Sankar, Manas Das
Nanofinishing Techniques: A Review, Proceedings of the Institution of Mechanical Engineers
2012 Part C: Journal of Mechanical Engineering Science
226 2 327 346 0
233 V.K. Jain, Vinod Kumar,M. Ravi Sankar
Experimental study and Empirical Modeling of Magnetic Abrasive Finishing on Ferromagnetic and Non-Ferromagnetic Materials
2012 International Journal of Precision Technology 3 1 91 104
234 . P. Bernard, S. Bag, K. Huang and R. Log A two-site mean field model of discontinuous dynamic recrystallization 2011
Materials Science and Engineering A 528 24 7357 7367 5
235 A. Banerjee, B. Bhattacharya, and A. K. Mallik
Forward and inverse analyses of an SMA actuated complaint link 2011
Journal of Mechanisms and Robotics 3 - 1 10 0
236 A. K. Parimi, P.S.Robi, S. K. Dwivedy Severe plastic deformation of copper and AlCu alloy using multiple channel-die compression
2011 Materials and Design 32 4 1948 1956 10
237 A. Patra, D. Bandyopadhyay, G. Tomar, A. Sharma, and G. Biswas
Instability and dewetting of ultrathin solid viscoelastic films on homogeneous and heterogeneous substrates
2011 The Journal of Chemical Physics 134 - 064705-1 11 3
-
191
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
238 A.F. Di Rienzo, P. Asinari, R. Borchiellini and S.C. Mishra
Improved angular discretization and error analysis of the lattice Boltzmann method for solving radiative heat transfer in a participating medium
2011 International Journal of Numerical Methods for Heat and Fluid Flow
21 5 640 662 4
239 Abhishek T. Dhumal, R. Ganesh Narayanan, G. Saravana Kumar
Simulation Based Expert System to Predict the Tensile Behaviour of Tailor Welded Blanks
2011 International Journal of Advanced Manufacturing Systems
13 1 159 171 0
240 B. B. Sahoo, U. K. Saha, and N. Sahoo Theoretical performance limits for syngas-diesel fueled compression ignition engine from second law analysis
2011 Energy 36 2 760 769 5
241 B. Nayak, S. K. Dwivedy and K.S.R.K Murthy
Dynamic analysis of magnetorheological elastomer-based sandwich beam with conductive skins under various boundary conditions
2011 Journal of Sound and Vibration 330 - 1837 1859 6
242 B. Parida, S. Pal, P. Biswas, M. M. Mohapatra and S. Tikader
Mechanical and Micro-structural Study of Friction Stir Welding of Al-alloy 2011
International Journal of Applied Research In Mechanical Engineering
1 2 69 74 0
243 B. Pratiher and S. K. Dwivedy Nonlinear response of a vertically moving viscoelastic beam subjected to a fluctuation contact load
2011 Acta Mechanica. 218 1-2. 65 85 0
244 B. Pratiher and S. K. Dwivedy Nonlinear vibrations and frequency response analysis of a cantilever beam under periodically varying magnetic field
2011 Mechanics Based Design of Structures and Machines: An International Journal
39 3 1539 1542 1
-
192
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
245 B.B. Sahoo, U. K. Saha and N. Sahoo
Effect of load level on the performance of a dual fuel compression ignition engine operating on syngas fuels with varying H2
2011 /CO content
Journal of Gas Turbine and Power, Transactions of ASME
133 12 122802-1 12 3
246 Biswas Pankaj and Mandal N. R. A Study on Port Plug Distortion caused by Narrow Gap Combined GTAW & SMAW and Electron Beam Welding
2011 Journal of Fusion Engineering and Design
86 - 99 105 1
247 Biswas Pankaj, and Mandal, N. R. Effect of Tool Geometries on Thermal History of FSW of AA1100 2011 Welding Journal 90 - 129S 135S 6
248 Biswas Pankaj, D. Anil Kumar, Mandal N. R. and Mahapatra M. M.
A Study on the Effect of Welding Sequence in Fabrication of Large Stiffened Plate Panels
2011 J. Marine. Sci. Appl. 10 - 429 436 0
249 Biswas Pankaj, Mandal N. R. and Das S.
Prediction of Welding Residual Stresses and Deformations of Large Stiffened Panels using Average Plastic Strain Method
2011 Journal of Science and Technology of Welding and Joining
16 3 227 231 3
250 Biswas Pankaj, Mandal N. R., Sha O. P. and Mahapatra M. M.
Thermo-mechanical and Experimental Analysis of Double Pass Line Heating 2011 J. Marine Sci. Appl 10 - 190 198 0
251 Biswas Pankaj, Sujoy Tikader, Rajesh Ranjan and Mandal N. R.
Effect of welding tacks and sequences on residual stress in stiffened panel fabrication
2011 Journal of Ocean and Ship Technology 2 2 99 113 1
252 C. Subramanian and S. Senthilvelan
Short-term Flexural Creep Behavior and Model Analysis of a Glass-fiber-reinforced Thermoplastic Composite Leaf spring
2011 Journal of Applied Polymer Science 120 6 3689 3686 0
-
193
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
253 C. Subramanian, Sunil Balwant Deshpande and S. Senthilvelan
Effect of Reinforced Fiber Length on Damping Performance of Thermoplastic Composites
2011 Advanced Composite Materials 20 4 319 335 0
254 D. A. Perumal, A. K. Dass Multiplicity of Steady Solutions in Two-Dimensional Lid-Driven Cavity Flows by the Lattice Boltzmann Method
2011 Computers & Mathematics with Applications
61 12 3711 3721 9
255 D. Chatterjee and G. Biswas
The Effects of Reynolds and Prandtl Numbers on Flow and Heat Transfer Across Tandem Square Cylinders in the Steady Flow Regime
2011 Numerical Heat Transfer, Part A 59 - 421 437 6
256 D. K. Biswal, D. Bandopadhya , and S. K. Dwivedy
Electro-mechanical and thermal characterization of pure silver-electroded ionic polymer-metal composite (IPMC) actuator
2011
Part C: Journal of Mechanical Engineering Science, Proceeding of the Institute of Mechanical Engineers
in press - - - 0
257 D. Sharma, K. Deb, N. N. Kishore Domain-Specific Initial Population Strategy for Compliant Mechanisms Using Customized Genetic Algorithm
2011 Structural and Multidisciplinary Optimization
43 4 541 554 2
258 Eswaran M, Singh A, and Saha UK Experimental Investigation of Liquid Free Surface Behaviour in an Excited Tank, Proc. of the IMechE
2011 PartM: Journal of Engineering for the Maritime Environment
225 - 133 148 0
259 Fonseca A, Inacio N, Kanagaraj S, Oliveira MSA, Simoes JAO
The use of Taguchi technique to optimize the compression moulding cycle to process acetabular cup components
2011 Journal of Nanoscience and Nanotechnology 11 - 5334 5339 1
-
194
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
260 Fonseca A, Kanagaraj S, Oliveira MSA, Simoes JAO
Enhanced UHMWPE reinforced with MWCNT through mechanical ball-milling 2011
Defect and Diffusion Forum 312-315 - 1238 1243 4
261 Ganesh, N. and Sotiropoulos, F. IDeC(k): A new velocity reconstruction algorithm on arbitrarily polygonal staggered meshes
2011 Journal of Computational Physics 230 17 6583 6604 0
262 H. Gadgil, A. Dolatabadi, B. N. Raghunandan
Mass distribution studies in effervescent sprays 2011 Atomization and Sprays 21 5 375 390 1
263 Hrishikesh P. Gadgil, B. N. Raghunandan Some features of spray breakup in effervescent atomizers 2011 Experiments in Fluids 50 2 329 338 9
264 Hrishikesh P. Gadgil, B. N. Raghunandan Effect of air injection configuration on the characteristics of effervescent sprays 2011
AIAA Journal of Propulsion and Power 27 4 925 928 1
265 Hrishikesh P. Gadgil, B. N. Raghunandan Model for predicting the mean drop size in effervescent sprays 2011
AIAA Journal of Propulsion and Power 27 5 937 943 0
266 I. Chakraborty, G. Biswas, and P. S. Ghoshdastidar
Bubble generation in quiescent and co-flowing liquids 2011
International Journal of Heat and Mass Transfer
54 - 4673 4688 11
267 J. C. Kalita and A. K. Dass Higher Order Compact Simulation of Double-Diffusive Natural Convection in a Vertical Porous Annulus
2011 Engineering Applications of Computational Fluid Mechanics
5 - 357 371 2
268 J. Sardar, D. Bandopadhya
Processing, Fabrication and Investigation of Thermal Characteristics of Portland Pozzolanic Cement Filled Polypropylene Composites
2011 International Journal of Plastic and Polymer Technology
1 1 16 37 0
-
195
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
269 Joshi S. N. and Pande S. S. Intelligent process modeling and optimization of die-sinking electric discharge machining
2011 Applied Soft Computing 11 2 2743 2755 17
270 Kanagaraj S, Fonseca A, Guedes RM, Oliveira MSA, Simoes JAO
Thermo-mechanical behaviour of ultrahigh molecular weight polyethylene-carbon nanotubes composites under different cooling techniques
2011 Defect and Diffusion Forum 312-315 - 331 340 0
271 Khoo W. K. S., Kalita K., and Garvey S. D.
Practical Implementation of the Bridge Configured Winding for Producing Controllable Transverse Forces in Electrical Machines
2011 IEEE Transactions on Magnetics 47 6 1712 1718 4
272
Lamas BC, Fonseca MAL, Goncalves FAMM, Ferreira AGM, Fonseca IMA, Kanagaraj S, Martins N, Oliveira MSA
EG/CNTs nanofluids engineering and thermal characterization 2011
Journal of Nano Research 13 - 69 74 5
273 M. Chandrasekaran, M. Muralidhar and U.S. Dixit
An interactive online finish milling process optimization 2011
International Journal of Applied Engineering Research
6 5 949 959 0
274 M. Hazarika, S. Deb, U.S. Dixit and J.P. Davim
Fuzzy set based setup planning system with ability for online learning 2011
Proc. IMechE, Part B: J. Engineering Manufacture
225 2 247 263 0
-
196
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
275 M. Ravi Sankar, J. Ramkumar, S Aravindan
Machining of Metal Matrix Composites with Minimum Quantity Cutting Fluid and Flood Cooling
2011 Advanced Materials Research 299-300 - 1052 1055 0
276 M. Ravi Sankar, V. K. Jain, J. Ramkumar, Y. M. Joshi
Rheological Characterization of Styrene-Butadiene based medium and its Finishing Performance using Rotational Abrasive Flow Finishing Process
2011 International Journal of Machine tools and Manufacture
51 12 947 957 6
277 M.Baruah, A.Dewan, P. Mahanta Performance of elliptical pin fin heat exchanger with three elliptical perforations
2011 CFD Letters 3 2 65 73 0
278 Manas Das, V.K. Jain, P.S Ghoshdastidar Investigations into out-of-roundness of internal surfaces of stainless steel tubes finished by R-MRAFF Process
2011 Journal of Materials and Manufacturing Processes
26 - 1073 1084 0
279 Monikankana Sharma, Subhash C. Mishra,& P. Mahanta
An experimental investigation on efficiency improvement of a conventional kerosene pressure stove
2011 International Journal of Energy for a Clean Environment
12 1 79 93 0
280 Muthukumar P, Anand P, Sachdeva P Performance analysis of porous radiant burners used in LPG cooking stove 2011
Int. J. Energy and Environment 2 - 367 374 0
281 N. Sahoo and R. K. Peetala Transient temperature data analysis for a supersonic flight test 2011
ASME Journal of Heat Transfer 132 - 31 5 5
282 N. Sahoo and R. K. Peetala Transient surface heating rates from a nickel film sensor using inverse analysis 2011
International Journal of Heat and Mass Transfer
54 - 1297 1302 6
283 P. Janaki Ramulu, R. Ganesh Narayanan
Weld zone representation during the formability prediction of friction stir welded blanks with similar thickness sheets
2011 Journal of Strain Analysis for Engineering Design
46 6 456 477 3
-
197
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
284 P. K. Barua, D. Deka, U.S. Dixit Mathematical Modelling of Change of Temperature in Pulsating Heat Pipes with Single Loops
2011 International Journal of Energy, Information and Communications
2 - 33 52 0
285 P. K. Mishra, A. K. De, M. K. Verma and V. Eswaran
Dynamics of reorientations of large-scale flow in Rayleigh-Benard convection
2011 J. Fluid Mech. 668 - 480 499 13
286 P. Kumari, S. Kapuria Boundary layer effects in rectangular cross-ply Levy-type plates using zigzag theory
2011 ZAMM-Zeitschrift Fur Angewandte Mathematik Und Mechanik
91 7 565 580 3
287 R. Das, S.C. Mishra, T.B.P Kumar and R. Uppaluri
An inverse analysis for parameter estimation applied to a non-Fourier conduction-radiation problem
2011 Heat Transfer Engineering 32 - 455 466 4
288 R. Das, U.S. Dixit and S. Deb
Effect of die land length and lubrication on the mechanical properties of the extruded products in a multi-hole extrusion process: an experimental study
2011 International Journal of Manufacturing Technology and Industrial Engineering
1 2 175 179 0
289 R. Ganesh Narayanan, K. Veerababu, K. Siva Krishna, G. Saravanakumar
Determining the forming behavior of tailor welded blanks Expert systems predict results
2011 Stamping Journal 1 - 14 17 0
290 R. Kumar, N. Sahoo, V. Kulkarni and A. Singh Laser based calibration technique of thin film gauges for short duration transient measurement
2011
Journal of Thermal Science and Engineering Applications: Transactions of ASME
3 4 504 509 0
-
198
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
291 R. Muthukumaran, S.C. Mishra, S. Maruyama and K. Mitra
Assessment of signals from a tissue phantom subjected to radiation sources of temporal spans of the order of a nano-, a pico- and a femto-second a numerical study
2011 Numerical Heat Transfer, Part A 60 - 154 170 4
292 R. P. Chopade, S.C. Mishra, P. Mahanta, S. Maruyama
Effects of locations of a 3-D design object in a 3-D radiant furnace for prescribed uniform thermal conditions
2011 Applied Thermal Engineering 31 16 3262 3274 1
293 R. S. Patil, M. Pandey and P. Mahanta
Parametric Studies and Effect of Scale-up on Wall-to-Bed Heat Transfer Characteristics of Circulating Fluidized Bed Risers
2011 Experimental Thermal and Fluid Science 35 3 485 494 1
294 R.P Chopade, E. Agnihotri, A.K.Singh, A.Kumar, R.Uppaluri, S.C Mishra, P.Mahanta
Application of a particle swarm algorithm for parameter retrieval in a transient conduction-radiation problem
2011 Numerical Heat Transfer; Part A: Applications
59 9 672 692 5
295 R.P Chopade, S.C Mishra, P. Mahanta, S. Maruyama
Numerical analysis of an inverseboundary design problem of a 3-D radiant furnace with a 3-D design object
2011 Numerical Heat Transfer; Part A: Applications
60 1 25 49 0
296
R.P. Chopade, E. Agnihotri, A.K. Singh, A. Kumar, R. Uppaluri, S.C. Mishra and P. Mahanta
Application of particle swarm algorithm for parameter retrieval in a transient conduction-radiation problem
2011 Numerical Heat Transfer, Part A 59 - 672 692 5
-
199
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
297 R.P. Chopade, S.C. Mishra, P. Mahanta and S. Maruyama
Numerical analysis of an inverse boundary design problem of 3-D radiant furnace with a 3-D design object
2011 Numerical Heat Transfer, Part A 60 - 25 49 7
298 Rakesh K., Sahoo N., Kulkarni V. N and Singh A.
Laser based calibration technique of thin film gauges for short duration transient measurements
2011 Journal of Thermal Science and Engineering Applications
3 - 044504-1 6 0
299 Rama Sreekanth P.S, Kanagaraj S UHMWPE for total joint replacements: A review on trends and developments 2011
Journal of North East Regional Orthopaedic Surgeons Association
7 - 87 99 0
300 S. Bag A perspective review on laser assisted microjoining 2011 Recent Patents on Mechanical Engineering
4 2 153 167 1
301
S. D. Kore, P. P. Date, S.V. Kulkarni, Satendra Kumar, Dolly Rani, M. R. Kulkarni, S.V. Desai, R.K. Rajawat, K.V. Nagesh, and D.P. Chakravarty
Application of Electromagnetic Impact Technique for Welding Copper-to-Stainless Steel Sheets
2011 International Journal of Advanced Manufacturing Technology
54 - 949 955 2
302 S. K. Laha and S. K. Kakoty Non-linear dynamic analysis of a flexible rotor supported on porous oil journal bearing
2011 Communications in Nonlinear Science and Numerical Simulation
16 3 1616 1631 6
303 S. Kapuria, P. Kumari Extended Kantorovich method for three dimensional elasticity solution of laminated composite structures
2011 Journal of Applied Mechanics (ASME) 78 - 1 8 4
-
200
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
304 S. Kapuria, P. Kumari Three-dimensional iso-field micromechanics for effective electrothermoelastic properties of piezoelectric composites
2011 Journal of Mechanics of Materials and Structures
6 - 249 265 0
305 S. S. Gautam, R. Babu, and P. M. Dixit Ductile Fracture Simulation in the Taylor Rod Impact Test using Continuum Damage Mechanics
2011 International Journal of Damage Mechanics 20 3 347 369 0
306 S. Sarkar, A. Dalal and G. Biswas,
Unsteady wake dynamics and heat transfer in forced and mixed convection past a circular cylinder in cross flow for high Prandtl numbers
2011 International Journal of Heat and Mass Transfer
54 15-16 3536 3551 5
307 S. Sen, S. Mittal, and G. Biswas Flow past a Square Cylinder at Low Reynolds Numbers 2011
International Journal for Numerical Methods in Fluids
67 - 1160 1174 9
308 S.C. Mishra and A. Stephen Combined mode conduction and radiation heat transfer in a spherical geometry with non-Fourier Effect
2011 International Journal of Heat and Mass Transfer
54 - 2975 2989 5
309 S.C. Mishra and Ch. Hari Krishna Analysis of radiative transport in a cylindrical enclosure - an application of the modified discrete ordinate method
2011 Journal of Quantitative Spectroscopy and Radiative Transfer
112 - 1065 1081 8
310 S.C. Mishra, Ch. Hari Krishna and M.Y. Kim
Analysis of conduction and radiation heat transfer in a 2-D cylindrical medium using the modified discrete ordinate method and the lattice Boltzmann method
2011 Numerical Heat Transfer, Part A 60 - 254 287 10
-
201
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
311 S.C. Mishra, R. Muthukumaran and S. Maruyama
The finite volume method approach to the collapsed dimension method in analyzing steady/transient radiative transfer problems in participating media
2011 International Communication in Heat and Mass Transfer
28 3 291 297 0
312 Sahoo BB, Saha UK, and Sahoo N
Theoretical Performance Limits for a SyngasDiesel Fueled Compression Ignition Engine from Second Law Analysis
2011 Energy 36 - 760 769 5
313 Sahoo BB, Sahoo N, and Saha UK Dual Fuel Performance Studies of a Small Diesel Engine Using Green Fuels 2011
Applied Mechanics and Materials 110-116 - 2101 2108 1
314 Satyajit Panda Nonlinear analysis of smart annular plates using cylindrically orthotropic piezoelectric fiber-reinforced composite
2011 Journal of Intelligent Material Systems and Structures
22 - 1789 1801 0
315 Siddharth Mehta, K. Prashanth Chauhan, S. Kanagaraj
Modeling of thermal conductivity of nanofluids by modifying Maxwells equation using cell model approach
2011 Journal of Nanoparticle Research 13 - 2791 2798 3
316
Sukhomay Pal, P. Stephan Heyns, Burkhard H. Freyer, Nico J. Theron and Surjya K. Pal
Tool wear monitoring and selection of optimum cutting conditions with progressive tool wear effect and input uncertainties
2011 Journal of Intelligent Manufacturing 22 - 491 504 3
317 U.S. Dixit, S.N. Joshi, J.P. Davim Incorporation of material behavior in modeling of metal forming and machining processes: A review
2011 Materials & Design 32 7 3655 3670 12
-
202
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
318 V. Kulkarni, N. Sahoo and S. D. Chavan Simulation of honeycomb-screen combinations for turbulence management in a subsonic wind tunnel
2011 Journal of Wind Engineering and Industrial Aerodynamics
99 1 37 45 5
319 V.K. Pantangi, S.C. Mishra, P. Muthukumar and R. Reddy
Studies on porous radiant burners for LPG cooking applications 2011 Energy 36 - 6074 6080 2
320 M. Chandrasekaran, M. Muralidhar, C. Murali Krishna and U.S. Dixit
Application of soft computing techniques in machining performance prediction and optimization: a literature review
2010 Int. J. Advanced Manufacturing Technology
46 5-8. 445 464 47
321 A Sakurai, S.C. Mishra and S. Maryuama
Radiation element method coupled with the lattice Boltzmann method applied to the analysis of a transient conduction and radiation heat transfer problem with heat generation in a participating medium
2010 Numerical Heat Transfer, Part A 57 - 346 368 10
322 A. Dewan, P. Patro, I. Khan, P. Mahanta The effect of fin spacing and material on the performance of a heat sink with circular pin fins
2010 Part A: Journal of Power and Energy 224 1 35 46 2
323 A. Banerjee, B. Bhattacharya, and A. K. Mallik
Optimum discrete location of a shape memory alloy wire for discrete actuation of a compliant link
2010 ASME Journal of Mechanical Design 132 - 1 7 5
324 A. N. Reddy, N. Maheshwari, D. K. Sahu and G. K. Ananthasuresh
Miniature compliant grippers with vision-based force sensing 2010
IEEE Transactions on Robotics 26 5 867 877 14
-
203
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
325 B. Buragohain, P. Mahanta, V.S. Moholkar
Biomass gasification for decentralized power generation: The Indian perspective
2010 Renewable and Sustainable Energy Reviews
14 1 73 92 43
326 B. Buragohain, P. Mahanta, V.S. Moholkar
Thermodynamic optimization of biomass gasification for decentralized power generation and Fischer-Tropsch synthesis
2010 Energy 35 6 2557 2579 15
327 B. Kawale and N. Sahoo Heat transfer data analysis from thin film heat transfer gauge 2010
Journal of the Institute of Engineers (India) 91 - 14 18 0
328 B. Kawale, R. K. Peetala, N. Sahoo and V. Kulkarni
Numerical methods to determine convecting heating rates on aerodynamic surfaces
2010 International Journal of Hypersonics 1 1 1 12 0
329 B. Pratiher and S. K. Dwivedy Nonlinear response of a soft magneto elastic cantilever beam with end mass under static and dynamics magnetic field
2010 Journal of Vibration and Control 17 9 1394 1406 2
330 B. Ray, G. Biswas and A. Sharma Generation of secondary droplets in coalescence of a drop at a liquid/ liquid interface
2010 Journal of Fluid Mechanics 655 - 72 104 5
331 B. Srinivas Naik, P. Janaki Ramulu, R. Ganesh Narayanan
Application of few necking criteria in predicting the forming limit of un-welded and tailor welded blanks
2010 Journal of Strain Analysis for Engineering Design
45 2 79 96 0
332 Biswas Pankaj and Mandal N. R. Analysis of Welding Distortion due to Narrow Gap welding of Upper Port Plug 2010
Fusion Engineering and Design 85 - 780 788 7
333 C. Kim, M.Y. Kim, M.J. Yu and S.C. Mishra Unstructured polygonal finite volume solutions of radiative heat transfer in a complex axisymmetric enclosure
2010 Numerical Heat Transfer, Part B 57 3 227 239 12
-
204
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
334 C. Subramanian and S. Senthilvelan Fatigue Performance of Discontinuous Fiber Reinforced Thermoplastic Leaf spring
2010 Journal of Materials: Design and Applications, Proc. of Ins. Mech. E Part L
224 3 93 100 1
335 C. Subramanian and S. Senthilvelan Abrasive Behavior of Discontinuous Fiber Reinforced Polypropylene Material 2010
Industrial Lubrication and Tribology 62 4 187 196 0
336 C. Subramanian and S. Senthilvelan Joint Performance of Glass Fiber Reinforced Polypropylene Leaf spring 2010 Composite Structures 93 2 759 766 1
337 C. Subramanian and S.Senthilvelan Effect of Reinforced Fiber Length on the Joint Performance of Thermoplastic Leaf spring
2010 Materials and Design 31 - 3733 3741 7
338 D. A. Perumal, A. K. Dass Simulation of Incompressible Flows in Two-Sided Lid-Driven Square Cavities. Part I-FDM
2010 CFD Letters 2 - 13 24 6
339 D. A. Perumal, A. K. Dass Simulation of Incompressible Flows in Two-Sided Lid-Driven Square Cavities. Part II-LBM
2010 CFD Letters 2 - 25 38 4
340 D. A. Perumal, G. V. S. Kumar, A. K. Dass Application of Lattice Boltzmann Method to Flows in Microgeometries 2010 CFD letters 2 - 75 84 0
341 D. Bandopadhya Derivation of Transfer Function of an IPMC Actuator Based on Pseudo-Rigid Body Model
2010 International Journal of Reinforced Plastics and composites
29 3 372 390 2
342 D. Bandopadhya and J. Njuguna Comparative Performance Studies of Active Vibration Control by IPMC with Kalman Estimation Algorithm
2010 IEEE Transaction on Control 18 - 1 2 0
-
205
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
343 D. Chatterjee, G. Biswas and S. Amiroudine
Numerical simulation of flow past row of square cylinders for various separation ratios
2010 Computers and Fluids 39 - 49 59 13
344 D. K. Biswal, D. Bandopadhya , and S. K. Dwivedy
Evaluation of dehydration loss and investigation of its effect on bending response of segmented IPMC actuators
2010 International Journal of Smart and Nano Materials
110-116 3 187 200 2
345 D. S. Kumar, A. K. Dass and A. Dewan
A Multigrid-Accelerated Code on Graded Cartesian Meshes for 2D Time-Dependent Incompressible Viscous Flows
2010 Engineering Applications of Computational Fluid Mechanics
4 - 71 90 0
346 D. S. Kumar, A. K. Dass and A. Dewan A multigrid-accelerated three-dimensional transient-flow code and its application to a new test problem
2010 Journal of Hydrodynamics 22 6 838 846 0
347 D.K. Sarma and U.S. Dixit Neural network modelling of forces and indirect prediction of tool wear in turning of grey cast iron with ceramic tool
2010 International Journal of Machining and Machinability of Materials
8 1 55 75 1
348 Durga Prasad, G.V., Pandey, M.
Parametric effects on reactivity instabilities and nonlinear oscillations in a nuclear-coupled double channel natural circulation boiling system
2010 Nuclear Engineering and Design 240 5 1097 1110 3
349 G. Gandikota, S. Amiroudine, D. Chatterjee and G. Biswas
The Effect of Aiding/ Opposing Buoyancy on Two-Dimensional Laminar Flow Across a Circular Cylinder
2010 Numerical Heat Transfer, Part A 58 - 385 402 14
-
206
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
350 Garg, S., Patra, K., Khetrapal, V., Pal, S. K. and Chakraborty, D.
Genetically evolved radial basis function network based prediction of drill flank wear
2010 Engineering Applications of Artificial Intelligence
23 - 1112 1120 0
351 H. Sarangi, K.S.R.K. Murthy and D. Chakraborty
Radial locations of strain gages for accurate measurement of mode I stress intensity factor
2010 Materials and Design 31 - 2840 2850 6
352 H. Sarangi, K.S.R.K. Murthy and D. Chakraborty
Optimum strain gage location for evaluating stress intensity factors in single and double ended cracked configurations
2010 Engineering Fracture Mechanics 77 - 3190 3203 3
353 Joshi S. N. and Pande S. S. Thermo-physical modeling of die-sinking EDM process 2010
Journal of Manufacturing Processes
12 1 45 56 17
354 K. Siva Krishna, R. Ganesh Narayanan, G. Saravanakumar
Tailor welded blank forming limit computation by neural network based expert system
2010
International Journal: Computer and Experimental Simulations in Engineering and Science
1 8 16 44 0
355 K. Veerababu, R. Ganesh Narayanan, G. Saravanakumar
An expert system for predicting the deep drawing behavior of tailor welded blanks 2010
Expert system with applications 37 12 7802 7812 12
356 K.S.R.K. Murthy and M. Mukhopadhyay Adaptive finite element analysis of mixed-mode crack problems with automatic mesh generator
2010 Journal for Numerical Methods in Engineering 49 - 1087 1100 10
-
207
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
357
Kalita K, Khoo W. K. S., Garvey S. D., Hill-Cottingham R. J., Rodger D. and Eastham J. F.
Passive Contra-Magnetised Parallel-Airgap Serial Flux Magnetic Bearings 2010
Journal of Mechanical Engineering Science 224 11 2515 2524 0
358 Kanagaraj S, Mathew M.T, Fonseca A, Oliveira M.S.A, Simoes J.A.O, Rocha L.A
Tribological characterization of carbon nanotubes/ultrahigh molecular weight polyethylene composites: the effects of sliding distance
2010 International Journal of Surface Science and Engineering
4 - 305 321 0
359
Khoo W. K. S., Kalita K, Garvey S. D., Hill-Cottingham R. J., Rodger D. and Eastham J. F.
Active Axial-MMF Parallel-Airgap Serial Flux Magnetic Bearings 2010
IEEE Transactions on Magnetics 46 7 2596 2602 0
360 Kulkarni V. N and Reddy K.P.J Counterflow drag reduction studies for a blunt cone in high enthalpy flow 2010
International Journal of Hypersonics 1 1 69 76 0
361 Kulkarni V. N and Reddy K.P.J Accelerometer based force balance for high enthalpy facilities 2010
Journal of Aerospace Engineering 23 4 276 280 0
362 Kulkarni V. N, Menezes V. and Reddy K.P.J Effectiveness of forward facing spike for drag reduction on a large angle blunt cone in hypersonic flow
2010 Journal of Spacecraft and Rockets 43 3 542 544 0
363 Lakshmanan, S.P., Pandey, M. Numerical investigations on power ramping procedure for a natural circulation boiling water reactor
2010 Nuclear Engineering and Design 240 4 860 867 0
-
208
S. No. Authors Title Year Journal Volume Iss
ue
Page start
Page end
Cita
tions
364 Lakshmanan, S.P., Pandey, M. Numerical investigation of startup instabilities in parallel-channel natural circulation boiling systems
2010 Science and Technology of Nuclear Installations
2010 - 1 8 1
365 M. Ajith, R. Das, R. Uppaluri and S.C. Mishra
Boundary heat fluxes in a square enclosure with an embedded design element
2010 Journal of Thermophysics and Heat Transfer
24 4 845 849 1
366 M. Baruah, A. Dewanand P. Mahanta Comparison of straight, perforated and tapered elliptical pin fin compact heat exchangers
2010 IUP Journal of Mechanical Engineering
3 4 7 27 0
367 M. Hazarika, U.S. Dixit and S. Deb A setup planning methodology for prismatic parts considering fixturing aspects
2010 International Journal of Advanced Manufacturing
51 9-12. 1099 1109 2
368 M. Hazarika, U.S. Dixit and S. Deb Effect of Datum Surface Roughness on Parallelism and P