live on-site auction - · pdf fileprince 800 ton cold chamber aluminum die cast machine,...
TRANSCRIPT
TM LIVE ON-SITE & WEBCAST
AUCTIONThursday, April 19, 2007Beginning at 10:00 A.M. EDT883 East Tolna RoadShrewsbury, PA 17361 USA
BIDITUP AUCTIONS & APPRAISALS WORLDWIDEwww.BIDITUP.com
ALUMINUM DIE CASTING MACHINES
ZINC DIE CASTING MACHINES
TRIM PRESSES
VERTICAL MACHINING CENTERS
CNC TURNING
SHOT BLAST MACHINES
DEBURRING LINE
MACHINE SHOP
COORDINATE MEASURING MACHINES
QC & INSPECTION
ROLLING STOCK
AIR COMPRESSORS & DRYERS
BRIDGE CRANES
PALLET WRAPPER
MISCELLANEOUS
------- SODICO (Southern Die-Casters, Inc.) -------MAJOR EAST COAST ALUMINUM & ZINC DIE CASTER
Featuring: HPM & Prince Cold Chamber Die Casting Machines from 450-Ton to 850-Ton, Techmire 66NT Zinc Machines, Extensive CNC Machining Including Chiron FZ 8W, FZ 12W VMCs & Mori-Seiki CNC Turning Centers, Shot Blast, Finishing, Complete Machine Shop & Plant Support
Chiron FZ12W & FZ08S/W High Speed Vertical Machining Centers
1998-2001 CNC
Techmire 66 NT Zinc Die Casting Machine
(2) AVAILABLE 1999
ZINC DIE CASTING MACHINES, ALUMINUM DIE CASTING MACHINES, TRIM PRESSES
— 2 —
ALUMINUM DIE CASTING MACHINESHPM MDL. II-800-A, Serial Number R00134/81-096, New 1981, Fully Factory Rebuilt (Pins, Bushings, Ways, Surface Platens, New Allen Bradley SLC 5/03, Etc.) and Updated in 2000 by HPM. Machine Is Equipped With Air Safety Ratchet, Motorized Die Height Adjustment; C-Frame Shot End Piston Bottles, and Multiplier Type Intensification, Hydraulic Ejection and Core Circuits. Machine Is Equipped With Rimrock MDL. 410 Sprayer and Rimrock 305 Auto-ladle, Striko/Westomat Dosing Furnace (New in 2004) (to Be Sold Either as a Complete Package or Separately).
Prince 800 Ton Cold Chamber Aluminum Die Cast Machine, Equipped With Air Safety Ratchet, Motorized Die Height Adjustment, C-Frame Shot End With Intensification, Core Circuits, Rimrock 410 Sprayer and 305 Auto-ladle. Machine Has Been Updated and Features Allen Bradley SLC 5/03 Controls.
Prince MDL. 525 CCA (450 Ton), Serial Number D-90019, New in 1990. Featuring Automatic Tie Bar Pull on Top Helper Side Tie Bar, Hydraulic Bumper Plate Ejection System Via Twin Cylinders, Prince Binary 1 Shot System, AB PLC 2/30 Controls With XY Com Interface, Inserted Shot Positions, Air Safety Ratchet, Hydraulic Motorized Die Height Adjustment, Core Circuits and Many More Features! Two (2) Machines Available!
Ex-Cell-O B&T 650 Ton Cold Chamber Die Cast Machine, Serial Number DC-7340. Featuring Motorized Die Height Adjustment, Allen Bradley SLC 5/02 Controls and Core Circuits. Machine Is Equipped With Rimrock MDL. 410 Sprayer and Rimrock 305 Auto-ladle (to Be Sold Either as a Complete Package or Separately). Special Note: This B&T Is a “Large Frame Machine” Featuring 32" of Tie Bar Clearance!
Prince 600 Ton, Serial Number D-7014, New in 1970. Equipped With Air Safety Ratchet, Motorized Die Height Adjustment, C-Frame Shot End With Intensification, Core Circuits, Rimrock 310 Sprayer and 305 Auto-Ladle. Machine Has Been Updated and Features Allen Bradley SLC 5/04 Controls.
Kux/Wickes MDL. HP-625, Serial Number 1585, New in 1972. Equipped With Air Safety Ratchet, Motorized Die Height Adjustment, C-Frame Shot End With Intensification, Core Circuits, Rimrock 310 Sprayer and 305 Auto-ladle. Machine Has Been Updated and Features Allen Bradley SLC 5/02 Controls.
HPM D-400-A, Serial Number 67-116. Equipped With: Air Safety Ratchet, Motorized Die Height, Pedestal Shot End With Intensification, Core Circuits.
HPM D-250-A, Serial Number 81001, New in 1981. Equipped With Air Safety Ratchet, Motorized Die Height Adjustment, C-Frame Shot End With Intensification, Core Circuits.
Large Selection of DME Master Unit Die Holders!
Rimrock Spare Parts (New in Box) to Be Sold Separately!
TRIM PRESSES72-Ton Greenerd Hydraulic C-Frame Trim Press, MDL. H10-25RS, S/N 1-31-73
35-Ton 4-Post Trim Press, 24" x 33" Bed, 29" Daylight
35-Ton 4-Post Trim Press, 24" x 32" Bed, 15" x 25" Posts, 30" Daylight
35-Ton 4-Post Trim Press, 24" x 30" Bed, 18" x 24" Between Posts, 16" Daylight
35-Ton 4-Post Trim Press, 20" x 29" Bed, 10" x 20" Between Posts, 30" Daylight
35-Ton 4-Post Trim Press, 24" x 33" Bed, 15" x 25" Between Posts, 30" Daylight
35-Ton Denison Multipress, MDL. LA35C92A112D15A104, 28" x 54", S/N 898128042AP20
35-Ton Dennison Multipress, MDL. LA35C92A104D13, S/N 4812P20
(2) 35-Ton Dennison Multi Press, 28" x 54" Bed
30-Ton Modern Hydraulics 4-Post Trim Press, MDL. 1R, 30" x 45" Bed, 20" x 35" Between Posts, 30" Daylight, S/N 1543
(3) Dennison Multipress
Techmire 66 NT Zinc Die Casting Machine
(2) AVAILABLE 1999
HPM II-800-A w/Striko Dosing Furnace
2000
800-TON
Prince 850-Ton Aluminum Die Casting Machine
850-TON
BIDITUP AUCTIONS & APPRAISALS WORLDWIDEwww.BIDITUP.com
ZINC DIE CASTING MACHINES
Techmire MDL. 66 NT, Serial Number 1999-66NTR-1105, New in
1999 - Just From Production. Two Available. This Is a Very Rare
Find; Don’t Miss out on This Opportunity to Upgrade to 66NT
Technology!
ZINC DIE CASTING MACHINES, ALUMINUM DIE CASTING MACHINES, TRIM PRESSES
— 3 —
B&T 28-Ton Rapid PressXLO B&T 50-Ton Trim Press
Rimrock ControlsTilting Furnace
HPM D-250-A, C-Frame Shot, Hyd. Ejection
Lester 250-Ton Hot Chamber
Prince 800-Ton Aluminum Die Casting Machine w/Rimrock 410 & 305 Auto Ladle
800-TON
Kux-Wickes HP-600 w/Rimrock Ladle & Sprayer
600-TON
HPM D-400-A Aluminum Die Casting Machine
400-TON
Prince 525 CCA 450-Ton Aluminum Die Casting Machine
450-TON 1991
(2) AVAILABLE
Can't make it to the auction in person? Bid live online at www.BIDITUP.com
VERTICAL MACHINING CENTERS
— 4 —
DIRECTIONSFrom Harrisburg International Airport MDT, Harrisburg, PA: (approximately 46 miles from site)Start going toward the airport exit on Harrisburg International Airport. Turn left on Airport Dr. Airport Dr. becomes White House Ln. Turn left on 2nd St. [PA-230]. Turn right on Eisenhower Blvd. Take ramp onto I-283. Take ramp onto I-76. Take Exit #242/PA-83 onto I-83 toward York Baltimore/Harrisburg. Take Exit #4/PA-851 toward Shrewsbury. Turn left on E. Forrest Ave. [PA-851]. Turn right on T582. Turn right on E. Tolna Rd. Arrive at 883 E. Tolna Rd. and look for auction signs.
Hampton Inn (1 mile from site)1000 Far Hills Dr.New Freedom, PA717-235-9898
Country Inn & Suites By Carlson York(13 miles from site)245 St. Charles WayYork, PA717-747-5833
Holiday Inn Express(13 miles from site)140 Leader Heights Rd.York, PA717-741-1000
LODGING
Chiron FZ12W High Speed Vertical Machining Center
1998–2000 CNC
(4) AVAILABLE
Excel PMC-5T18 & Enshu DTLC Vertical Machining Centers
1992 & 98 CNC
Chiron FZ08S/W Vertical Machining Center
CNC2001
VERTICAL MACHINING CENTERS2000 Chiron High Speed Vertical Machining Center, MDL. FZ12W, (2) 26" x 13.8" Work Areas, 21" X-Axis, 12" Y-Axis, 16" Z-Axis, 10,500 RPM, 12-ATC High Speed Basket Type Tool Changer, Coolant Thru Spindle, Mist Collector, Knoll Chip Conveyor, Manuals, GE Fanuc Series 21i-M Control, S/N 141-62
2000 Chiron High Speed Vertical Machining Center, MDL. FZ12W, (2) 26" x 13.8" Work Areas, 21" X-Axis, 12" Y-Axis, 16" Z-Axis, 10,500 RPM, 12-ATC High Speed Basket Type Tool Changer , Coolant, Manuals, GE Fanuc Series 21-M Control, S/N 141-57
1999 Chiron High Speed Vertical Machining Center, MDL. FZ12W, (2) 26" x 13.8" Work Areas, 21" X-Axis, 12" Y-Axis, 16" Z-Axis, 10,500 RPM, 12-ATC High Speed Basket Type Tool Changer, Coolant, Manuals, GE Fanuc Series 21-M Control, S/N 141-28
1998 Chiron High Speed Vertical Machining Center, MDL. FZ12W, (2) 26" x 13.8" Work Areas, 21" X-Axis, 12" Y-Axis, 16" Z-Axis, 10,500 RPM, 12-ATC High Speed Basket Type Tool Changer, Coolant Thru Spindle, Mist Collector, Knoll Chip Conveyor, Manuals, GE Fanuc Series 21-M Control, S/N 469-78
2001 Chiron High Speed Vertical Machining Center, MDL. FZ08S/W, (2) 21.7" x 11.8" Work Areas, 12" X-Axis, 10" Y-Axis, 11.4" Z-Axis, 15,000 RPM, 24-ATC Magazone Type Tool Changer, Knoll Chip Conveyor, Coolant, Manuals, GE Fanuc Series 21-M Control, S/N 204-56
1998 Excel Vertical Machining Center, MDL. PMC-5T18, 17" x 27" Table, 20" X-Axis, 16" Y-Axis, 18" Z-Axis, 8,000 RPM, 7.5 HP, BT40 Taper, 18-ATC, Coolant, Fanuc Series 21-M Control, S/N 5S5T1218
1992 Enshu Vertical Machining Center, MDL. DTCL, 15 3⁄4" x 27 1⁄2" Table, 219.7" X-Axis, 15.7" y-Axis, 11.8" Z-Axis, 10,000 RPM, 30-Taper, 16-ATC, Coolant, Fanuc Series O-M Control, S/N 233
*LARGE QUANTITY OF CNC TOOLING
FOR LEASE & FINANCE SERVICES - BIDITUP CAPITAL CORPORATIONCALL 818-508-7034
CNC TURNING, DEBURRING LINE
— 5 —
CNC TURNING 1998 Okuma CNC Lathe, MDL. LB10 II, 19" Swing Over Bed, 13.39" Over Carriage, 5.9" X-Axis, 13.79" Z-Axis, 6.69" Max Turning Diameter, 6,000 RPM, 12-Station Turret, Tail Stock, Enomoto Chip Conveyor, Okuma OSP U10L Control, S/N 0312
1998 Okuma CNC Lathe, MDL. LB10 II, 19" Swing Over Bed, 13.39" Over Carriage, 5.9" X-Axis, 13.79" Z-Axis, 6.69" Max Turning Diameter, 6,000 RPM, 12-Station Turret, Tail Stock, Enomoto Chip Conveyor, Okuma OSP700L Control, S/N 0113
1997 Okuma CNC Lathe, MDL. LNC8, 15 3⁄4" Swing, 6 3⁄4" X-Axis, 15.75" Z-Axis, 9" Turning Diameter, 15" Turning Length, 12-Station Turret, Okuma CNC Control, S/N D524
1993 Hardinge CNC Lathe, MDL CHNCI, 6" Swing Over Table, 6" X-Axis, 12" Z-Axis, 6" Turning Diameter, 4,000 RPM, GE Fanuc Series O-T Control, S/N CN-4675-T-C
(2) Mori Seiki NC Lathe, MDL. SL-OH, 7 1⁄2" Swing, 4.92" X-Axis, 7.86" Z-Axis, 8.3" Turning Diameter, 16 1⁄2" Max Turning Length, 8-Station Turret, Yasnac Control, S/N 1137, 1143
DEBURRING LINEAlmco Vibratory Deburring System, 48" Diameter Vibratory Deburring Mill Feeds to a 22" Wide Shaker Conveyor, Parts then flow to an Incline Conveyor System to Parts Delivery Hopper, Includes 32" Diameter Offline Vibratory Deburring Mill, Almco System Controls
Almco Deburring Line
LEASE/FINANCINGAVAILABLE
DIRECT FROM
BIDITUP Capital
Corporation
Mori Seiki SL-OH
Hardinge CHNCI CNC Lathe
CNC
1993
Okuma LNC8 CNC Lathe
CNC
1997
Okuma LB10 II CNC Lathe
CNC
(2) AVAILABLE 1998
Register at www.BIDITUP.com and receive auction updates via email.
SHOT BLAST MACHINES, MACHINE SHOP
— 6 —
SHOT BLAST MACHINESPangborn Roto Blast Shot Blast Machine, MDL. GN Rotoblast Barrel, 36" Wide Blast Chamber, Dust Collector, S/N 6GNR-63401
Pangborn Shot Blast Machine, MDL. GN, 36" Wide Blast Chamber, S/N 6GN-6R/S-880793
Wheelabrator Shot Blast Machine, MDL. 170, S/N 170084
MACHINE SHOPKingston Engine Lathe, MDL. HJ-1700, 12" x 88" Bed, 16" Swing x 70" Centers, 10" 3-Jaw Chuck, 2 1/2" Capacity, Tool Post
Cadillac Engine Lathe, MDL. 1428G, 11" x 44" Bed, 14" Swing x 28" Centers, 8" 3-Jaw Chuck, 1 5/8" Capacity, Tool Post
Hardinge Tool Room Lathe, 3 1/2" x 30" Dovetail Bed, 9" Swing x 20" Centers, 1 1/8" Collet Closure
Hardinge Tool Room Lathe, 6 3/4" x 36" Dovetail Bed, 11" Swing x 22" Centers, 1 1/4" Collet Closure
(3) McLean Bench Top NC Lathe, Coolant, McLean Control, Manuals
Lagun FTV-25 Vertical Mill, 10" x 50" T-Slotted Power Feed Table, 4,200 RPM VS, 2-Axis DRO
Bridgeport Series II Vertical Mill, 9" x 48" T-Slotted Power Feed Table, 2 HP, 4,200 RPM VS, Topaz 2-Axis DRO, S/N 249585
Bridgeport Vertical Mill, 9" x 42" T-Slotted Power Feed Table, 1 1/2 HP, 4200 RPM VS, 2-Axis DRO
Bridgeport Vertical Mill, 9"x 36" T-Slotted Table, 3 HP, S/N 36208
2002 Ipsco International Pin Cutoff and Grind Machine, MDL. PCO-2, S/N 00143
Richmond Radial Drill, MDL. SR2, 8" Diameter Column x 4' Arm, 24" x 36" Table, 100–1,500 RPM
RMT Radial Drill Press, MDL. Commander, 24" x 40" T-Slotted Table, Tooling, Coolant, Manuals
Amada-Wasino 8" x 20" Hydraulic Surface Grinder, MDL. SG-52A, 8" Wheel, S/N 11-012
Harig 6" x 18" Hydraulic Surface Grinder, MDL. 618W, 8" Grind Wheel, Dust Collector
Clausing 6" x 12" Hydraulic Surface Grinder, 8" Wheel
Brown & Sharpe 5" x 10" Hydraulic Surface Grinder
Ex-Cell-O RAM Type EDM, 5 1/2" x 10" Magnetic Chuck, Coolant
Wellsaw Horizontal Band Saw, MDL. 600, S/N 12035
Ridgid 535 Pipe Threader; Barker Horizontal Mill, MDL. PMD; (5) Burr King 2" Vertical Belt Grinder, MDL. 760; (2) Porter Cable 6" Vertical Belt Grinder; Jackson Horizontal and Vertical Head Index Drilling Table; Ettco Auto Lead Screw Tapper, MDL. ATV-5; Syncro Tapper, with 4-Station Rotary Table and Coolant; Ettco ATV-3 Multihead Tapper; Procunier Lead Screw Tapper; Dumore Horizontal Tapper; Syncro Tapper; Misc Tapping Machines; Dennison Bench Top Multipress; Atlas Bench Top Drill Press, MDL. 1421, 21" Swing; Powermatic 20" Floor Type Drill Press; Delta 16" Floor Type Drill Press; 16" Bench Top Drill Press; Orbit 12" Floor Type Drill Press; (2) Padflex 1000 Pad Printer, with Autoroll Digital Control; 5' x 4' Welding Table; Baldor Double End Pedestal Grinders, 1/2 HP; Tooling for Boring, Milling and Drilling; Chucks, Machining Vises; 12" Rotary Tables
Pangborn GN Rotoblast Pangborn GN Rotoblast
Wheelabrator 170 Barrel Blast Area
Cadillac Engine Lathe Ex-Cell-O EDM
Kingston Engine Lathe Ipsco PCO-2
2002
36"
TO SCHEDULE AN AUCTION OR APPRAISALCALL 818-508-7034
SHOT BLAST MACHINES, MACHINE SHOP
— 7 —
Hydraulic Surface Grinders Lagun & Bridgeport Vertical Mills
Radial Arm Drill RMT Radial Drill Press Bridgeport Vertical Mill Multi-Head Tapper Enco Tapper
Drill Presses 6" Belt Grinder Burr King Belt Grinders Tapper Padflex 1000 Pad Printer
Bench Top NC LatheRidgid Pipe ThreaderArbor PressesWells Horizontal Band SawDrill Bench
Can't make it to the auction in person? Bid live online at www.BIDITUP.com
COORDINATE MEASURING MACHINES, QC & INSPECTION, ROLLING STOCK
— 8 —
COORDINATE MEASURING MACHINESGiddings & Lewis Cordax CMM, MDL. Discovery D-8, 22" x 26" Table, Renishaw TP1S Probe & PC Control, Remote Control Unit, S/N 04270799
Sheffield Cordax CMM, MDL. 1805MEA, 20" x 44" Table, Sheffield Measurement Processor, Renishaw TP6 Probe, S/N C-6122-0390
QC & INSPECTIONJ & L Metrology EPIC 30E 30" Optical Comparator, 8 “x 32" Table, Quadra-Chek 3000 Control
Deltronic 14" Bench Top, Optical Comparator, Quadrachek 2000 DRO
Wilson Hardness Tester
Setra Digital Scales
Granite Surface Plates
Pin Gauges; Plug Gauges; Digital Indicators; Digital Height Gauges; Microscopes; Calipers; Pratt & Whitney Super Micrometer; Thread Gauges; Torque Gauges; Calibration Kits
ROLLING STOCKCaterpillar LPG Forklift, MDL. GC15, 3,000 LB, Side Shift, Hard Tires, Triple Mast, S/N ZEM01050
Toyota LPG Forklift, MDL. 5F-GC10, 1,800 LB x 130", Hard Tires, Side Shift, Double Mast, S/N 11640
Schaaeff Stand-Up Forklift, MDL. E3000YE, 3,000 LB x 152", S/N 30-1594
Genie Manlift, MDL. 2-30/20HD, 500 LB Max Load, Air Tires, S/N 30-87-1612
Jones & Lamson 30" Epic 30E Optical Comparator
Inspection Sample Inspection
Toyota ForkliftCaterpillar Forklift
Genie Manlift Stand-Up Forklift
Bausch & Lomb & Sheffield Coordinate Measuring Machines
Can’t make it to the auctionin person? Bid live online at
www.BIDITUP.com
WEB
CA
ST
30"
BIDITUP AUCTIONS & APPRAISALS WORLDWIDEwww.BIDITUP.com
COORDINATE MEASURING MACHINES, QC & INSPECTION, ROLLING STOCK
— 9 —
Ingersoll-Rand TMS0780 Dryer
Lantech Pallet Wrappers CNC Tooling
Pallet Racking
Dust Collector View of Trim Presses & Support Large Qty. Aluminum
Sullair 125 HP Compressor
125 HP 2004
Sullair 50 HP Compressor
50 HP
Quincy 25 HP Skid Mounted Compressors
25 HP
Acco 5-Ton Bridge Crane
5-TON
Acco 4-Ton Bridge Crane
4-TON
FOR LEASE & FINANCE SERVICES - BIDITUP CAPITAL CORPORATION CALL 818-508-7034
AIR COMPRESSORS & DRYERS, BRIDGE CRANES, PALLET WRAPPER, MISCELLANEOUS
— 10 —
TO SCHEDULE AN AUCTION OR APPRAISALCALL 818-508-7034
AIR COMPRESSORS & DRYERSSullair 125 HP Air Compressor, MDL. 20-125
2004 Ingersoll-Rand Air Dryer, MDL. TMS0780, S/N TMS0780-0402/3079
Sullair 50 HP Air Compressor, MDSL. 20-50
(2) Quincy 25 HP Skid Mounted Air Compressors
5 HP Air Compressor
BRIDGE CRANESAcco 5-Ton Underhung Bridge Crane, Yale Hoist, 20' Span x 150' Run, Remote Control
Acco 4-Ton Underhung Bridge Crane, 25' Span x 50' Run, Pendant Control
PALLET WRAPPERLantech 48" Pallet Wrapper, 88" Wrap Height, Digital Control
MISCELLANEOUS4-Compartment Dust Collector; Hobart Beta MIG 250 Welder; Thermal Arc Pak 5XT Plasma Cutter; Large Quantity of Drilling & Boring Tooling; Huot Tooling Storage Cabinets; Pallet Racking; (100’s) Wire Baskets; (100’s) Steel Parts Bins; Dump Hoppers; Barrels; Rig-Off Hydraulic Die Lift Cart; Presto Die Lift Cart; Trailer; Tool Chests; Clamps; Vises; Aluminum Ladders; Tool Boxes; Hand Tools; Large Qty Boring and Milling Tooling; Dake Arbor Presses; Floor Scales; Multiple Tool Crib & Storage Systems; Tube Stock; Wire Spools; Hose Spools; Fittings; Elbows; Tees; Connectors; Plastic Tubs & Totes; Lockers; Fans; Chairs; Tables; Microwaves; Refrigerators; Large Quantity of High End Office Equipment and Furniture
Portable Welder Pressure Washer
Pedestal Grinders Aluminum Stock
Ladles Serta Digital Scales
Tooling Tooling
Wire Baskets Metal BinsH-Frame PressToolboxes
LEASE/FINANCINGAVAILABLE DIRECT FROM BIDITUP Capital Corporation
LARGE QUANTITY
AIR COMPRESSORS & DRYERS, BRIDGE CRANES, PALLET WRAPPER, MISCELLANEOUS
— 11 —
Trailer
Office Furniture
Monitors
PC Equipment
Copiers & Faxes
Office Furniture Office Furniture
Office Furniture Office Furniture Parts Rolloff Stands
Dump Hoppers
LARGE QUANTITY
REAL ESTATE FOR SALE OR LEASE
883 E. Tolna Road
Shrewsbury, PA 17361
County: York
Total Space: 57,768 SF
Lot Size: 3.26 Acres
Year Built: 1974
Space Type: Manufacturing
Heavy Power and Large Natural Gas Service
Ample Parking
3 High Dock Doors
1 Grade Level Door
CONTACT RUSS BARDOLF AT 717-854-5357
FOR MORE INFORMATION
Register at www.BIDITUP.com and receive auction updates via email.
TM
LIVEON-SITE &WEBCAST
MACHINERY AUCTION APRIL 19, 2007
--------- SODICO (Southern Die-Casters, Inc.) ---------MAJOR EAST COAST ALUMINUM & ZINC DIE CASTER
Featuring: HPM & Prince Cold Chamber Die Casting Machines from 450-Ton to 850-Ton, Techmire 66NT Zinc Machines, Extensive CNC Machining Including Chiron FZ 8W, FZ 12W VMCs &
Mori-Seiki CNC Turning Centers, Shot Blast, Finishing, Complete Machine Shop & Plant Support
FOR THE COMPLETE TERMS & CONDITIONS OF THIS AUCTIONPlease visit our website — www.BIDITUP.com and click on Sodico
NOW OFFERING IN-HOUSE FINANCING & LEASING. Call 818.508.7034
PresortedFirst Class Mail
U.S. PostagePAID
Eugene, OregonPermit No. 305
TM MACHINERY AUCTION, LOOK INSIDE!
ATTENTION: PLANT MANAGER OR EQUIPMENT
BUYER
11426 Ventura BoulevardStudio City, California 91604Phone: 818.508.7034Fax: [email protected]
Koster Industries Inc., PA License #AY-000096-LFrank J. Sangiorgi, PA License #AU005093
IP-7209377
AUCTIONThursday, April 19, 2007Beginning at 10:00 A.M. EDT
PREVIEWWednesday, April 18, 20079:00 A.M. to 4:00 P.M. EDT
LOCATION883 East Tolna RoadShrewsbury, Pennsylvania 17361
See page 4 for directions & lodging
WEBCASTCan’t attend the auction in person? You can participate and bid in real time via the Internet. Preview assets with detailed digital photos, lot catalogs, and in-depth descriptions.
For more information, visit www.BIDITUP.comPlease note, all webcast participants must submit a
FEATURED AUCTIONThursday, April 19, 2007
Shrewsbury, Pennsylvania
SODICO(Southern Die-Casters, Inc.)
MAJOR EAST COAST ALUMINUM & ZINC DIE CASTER
For a Complete Listing of Upcoming Auctions, Visit www.BIDITUP.com
Register Online and Receive Auction Updates & Information via E-mail.
25% deposit and signed registration forms no later than 24 hours before a sale.
Chiron FZ12W & FZ08S/W High Speed Vertical Machining Centers HPM II-800-A w/Striko Dosing Furnace