2030 Dagenais Blvd West, Laval, Quebec H7L 5W2, CANADA

MMC has the solution you are looking for

www.mmcpackaging.com

MMC After Sales Service 450.625.4662 North America 1 888 662.8321

State-of-the-art Cap Lining Systems

LM-1 to LM-4 series1st generation of MMC Cap Lining Machines

Robust and high capacity equipment

The basic principal of our standard

cap lining process is to utilize a multi-

station rotary indexing machine to

receive parts into a pocket wheel in

multiple lanes. Each cap is fed into an

individual pocket in the pocket wheel

in order to maintain positive control

of each part while it is being processed

through the machine. Each of our

cap lining machines has individual,

dedicated stations.

Flexibility to run different closures in the machine with interchangeable tooling• Fastchangeovertoolingwith“zeroadjustment”installation

• Robustdesignstandards

• Stainlesssteelguarding

• CECompliance

• Fail-safesafetyswitchesforallguarding

• Flexibilityinrespectingcustomers’requirementsforelectricalcomponents and PLCs

• Fullsystemdocumentation

• Experiencedpersonneltoprovideextensivetraining atcustomer’ssite

LM-1 to LM-4 SeriesTodaslasmaquinariasenlainadorasMMCestándiseñadasyfabricadasparatroquelardiscosdelainerapartirderollosdematerialeinstalarlosdiscosensustapasavelocidadesdehasta1,200tapasporminuto,dependiendodeltamañoydiseñodelatapa.Contamosconherramientasdiseñadasparacortareinstalarvariostiposdeconfiguracionesdediscos:

Disk configuration Benefit

Mostcommondiskconfigurationusedforallgluedinliners (over0.200”-.5mmthick)aswellaslinersthatareinstalledunder a retention feature, or threads, in the cap.

Originally developed to offer retention properties for installing oversize, non-glued in-disks into a cap, which is unscrewed off the mold. It also offers centering properties, which enhance the induction sealing process by having the disk centered on the container land area during sealing. In addition, it offers a removal feature for induction sealed foils.

A single protruding tab which is folded back during the cap lining process. This tab offers convenient removal for induction sealed foils.

Eachofourmachinesiscapableofhavingtwomaterials(ofthesamediameter)installed into the closure in one pass through the machine. The materials are fed together through the machine to the punching station where they are punched together into the closure.

Itisusedinspeciallydesignedcapsthathaveadispensingfeatureororifice. The donut shape helps prevent leaks and still allows product to be dispensed.

Round

Tri-Tab

Pull-Tab

Donut

Double lining

Does your cap have a special shape & size?SendusacapsampleandliningmaterialsampleandoneofourspecialistswillbehappytoinformyouaboutthecuttingandtheinsertioncapabilitiesofourLiningMachines.

MMC Cap Lining

Systems offer

unparalleled benefits

to our customers,

from comprehensive

documentation to

robust design standards.

HOT MELT ADHESIVE APPLICATION SYSTEMS

To dispense glue into caps prior to liner detection.

LINING MATERIAL REWINDER

To remove lining material from the lining machine in a controlled manner without chopping or letting lining material accumulate on the floor.

INSPECTION AND REJECTION DEVICES

Toautomaticallydetectandrejectdefective parts.

LINING MACHINE

To cut and install lining material disks into caps.

MODULAR TOOLING

To allow lining machine to process different capsizeswithquickchange,“zeroadjustment”,interchangeable tooling.

ELECTRICAL CABINET AND OPERATOR INTERFACE

To electrically control the entire system.

PRE-FEEDER

Bulk accumulator to receive caps from boxes or the molding press then deliver the caps to the cap sorter.

ROLL STOCK UNWINDER

To unwind lining material rolls into the lining machine in a controlled manner.

IN-FEED CONVEYOR

To deliver caps to lining machine in one or multiple lanes.

ROTARY ACCUMULATION TURNTABLE

To accumulate and divide caps into multiple lanes.

SORTER

To orient and deliver caps downstream equipment.

MMC typically supplies a complete turn-key cap lining system. We design, manufacture, assemble and integrate all auxiliary peripherals needed to provide a turn-key system so that our customers do not have to electrically or mechanically integrate any items into this system.

LM-1, LM-2, LM-3 and LM-4 Cap Lining Machines

Allofourmachinesarecapableofrunningat200cyclesperminute:

Machine 1-up 2-up 3-up 4-up 5-up

LM-1 120mm

LM-2 110mm 70mm 43mm 28mm

LM-3 120mm 89mm 53mm 38mm 28mm

LM-4 140mm 120mm 70mm 53mm 38mm

LM-1 to LM-4 seriesMMC Cap Lining Systems

DISCHARGE SYSTEMS

To count caps and dispense caps into cartons or bags. Discharge systems can be supplied with box shifting devices or a simple two-position switch gate.

T 450.625.4662

www.mmcpackaging.com

2030 Dagenais Blvd West, Laval, Quebec H7L 5W2, CANADA

MMC has the solution you are looking for

www.mmcpackaging.com

MMC After Sales Service 450.625.4662 North America 1 888 662.8321

State-of-the-art Cap Lining Systems

LM-1 to LM-4 series1st generation of MMC Cap Lining Machines

Robust and high capacity equipment

The basic principal of our standard

cap lining process is to utilize a multi-

station rotary indexing machine to

receive parts into a pocket wheel in

multiple lanes. Each cap is fed into an

individual pocket in the pocket wheel

in order to maintain positive control

of each part while it is being processed

through the machine. Each of our

cap lining machines has individual,

dedicated stations.

Flexibility to run different closures in the machine with interchangeable tooling• Fastchangeovertoolingwith“zeroadjustment”installation

• Robustdesignstandards

• Stainlesssteelguarding

• CECompliance

• Fail-safesafetyswitchesforallguarding

• Flexibilityinrespectingcustomers’requirementsforelectricalcomponents and PLCs

• Fullsystemdocumentation

• Experiencedpersonneltoprovideextensivetraining atcustomer’ssite

LM-1 to LM-4 SeriesTodaslasmaquinariasenlainadorasMMCestándiseñadasyfabricadasparatroquelardiscosdelainerapartirderollosdematerialeinstalarlosdiscosensustapasavelocidadesdehasta1,200tapasporminuto,dependiendodeltamañoydiseñodelatapa.Contamosconherramientasdiseñadasparacortareinstalarvariostiposdeconfiguracionesdediscos:

Disk configuration Benefit

Mostcommondiskconfigurationusedforallgluedinliners (over0.200”-.5mmthick)aswellaslinersthatareinstalledunder a retention feature, or threads, in the cap.

Originally developed to offer retention properties for installing oversize, non-glued in-disks into a cap, which is unscrewed off the mold. It also offers centering properties, which enhance the induction sealing process by having the disk centered on the container land area during sealing. In addition, it offers a removal feature for induction sealed foils.

A single protruding tab which is folded back during the cap lining process. This tab offers convenient removal for induction sealed foils.

Eachofourmachinesiscapableofhavingtwomaterials(ofthesamediameter)installed into the closure in one pass through the machine. The materials are fed together through the machine to the punching station where they are punched together into the closure.

Itisusedinspeciallydesignedcapsthathaveadispensingfeatureororifice. The donut shape helps prevent leaks and still allows product to be dispensed.

Round

Tri-Tab

Pull-Tab

Donut

Double lining

Does your cap have a special shape & size?SendusacapsampleandliningmaterialsampleandoneofourspecialistswillbehappytoinformyouaboutthecuttingandtheinsertioncapabilitiesofourLiningMachines.

MMC Cap Lining

Systems offer

unparalleled benefits

to our customers,

from comprehensive

documentation to

robust design standards.