lm286b+ - electronics & appliances: tablets, … 55 ma - peak pulsed forward current i fp 110 ma...
TRANSCRIPT
1#
Product Family Data Sheet Rev 1.0 2017. 06. 30
Middle Power LED Series 2835 18V Ra90 Hot temp
LM286B+ Designed for better lm/$ (Lamps)
Features & Benefits
0.9W High-Voltage LED
Standard form factor for design flexibility (2.8 × 3.5)
2
Table of Contents
1. Characteristics ----------------------- 3
2. Product Code Information ----------------------- 6
3. Typical Characteristics Graphs ----------------------- 16
4. Outline Drawing & Dimension ----------------------- 19
5. Reliability Test Items & Conditions ----------------------- 20
6. Soldering Conditions ----------------------- 21
7. Tape & Reel ----------------------- 22
8. Label Structure ----------------------- 25
9. Packing Structure ----------------------- 26
10. Precautions in Handling & Use ----------------------- 30
3
1. Characteristics
a) Absolute Maximum Rating
Item Symbol Rating Unit Condition
Ambient / Operating Temperature Ta -40 ~ +80 ºC -
Storage Temperature Tstg -40 ~ +80 ºC -
LED Junction Temperature Tj 115 ºC -
Forward Current IF 55 mA -
Peak Pulsed Forward Current IFp 110 mA Duty 1/10, pulse width 10ms
Assembly Process Temperature - 260 <10
ºC s
-
ESD (HBM) - 2 kV -
Note:
Proper current derating must be observed to maintain junction temperature below the maximum at all time.
4
b) Electro-optical Characteristics (IF = 50 mA, Ts = 25 ºC)
Item Unit Rank Bin Min. Typ. Max.
Forward Voltage (VF) V
W8
or
WK
A2 16 17
A3 17 18
A4 18 - 19
A5 19 - 20
Color Rendering Index (Ra) - 7 90 - -
Special CRI (R9) - - 50
Thermal Resistance (junction to solder point)
ºC/W
- 20 -
Beam Angle º - 120 -
Note:
Samsung maintains measurement tolerance of: forward voltage = ± 0.1 V, CRI = ± 3
5
b) Electro-optical Characteristics (IF = 50 mA, Ts = 25 ºC)
Item CRI (Ra)
Min. Nominal CCT (K)
Bin
Sorting @ 50mA
Min. Max.
Luminous Flux (Φv) 90
2700 SA 80 90
3000 SA 83 93
3500 SA 86 96
4000 SA 90 100
5000 SA 92 102
5700 SA 91 101
6500K SA 90 100
Note:
Samsung maintains measurement tolerance of: forward voltage = ±0.1V, luminous flux = ± 5 %, CRI = ±3.
6
2. Product Code Information
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
S P M W H 1 2 2 4 5 Q 7 W 8 R 0 S A
Digit PKG Information Code Specification
1 2 3 Samsung Package Middle Power SPM Middle power
4 5 Color WH White
6 Product Version 1 1st version
7 8 9 Form Factor 224 2.8 x 3.5 x 0.65 mm; 2 pads
10 Sorting Current (mA) 5 50mA
11 Chromaticity Coordinates Q ANSI Standard
12 CRI 7 Min. 90
13 14 Forward Voltage (V)
W8
or
WK
16~20 Bin
code
A2 A3 A4 A5
16 ~ 17 17 ~ 18 18 ~ 19 19 ~ 20
W8: 4,000ea per reel ,WK : 12,000ea per reel
15 16 CCT (K)
W☆ 2700
Bin Code:
W1, W2, W3, W4, W5, W6, W7, W8, W9, WA, WB, WC, WD, WE, WF, WG
V☆ 3000 V1, V2, V3, V4, V5, V6, V7, V8, V9, VA, VB, VC, VD, VE, VF, VG
U☆ 3500 U1, U2, U3, U4, U5, U6, U7, U8, U9, UA, UB, UC, UD, UE, UF, UG
T☆ 4000 T1, T2, T3, T4, T5, T6, T7, T8, T9, TA, TB, TC, TD, TE, TF, TG
R☆ 5000 R1, R2, R3, R4, R5, R6, R7, R8, R9,RA,RB,RC,RD,RE,RF,RG
Q☆ 5700 Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9,QA,QB,QC,QD,QE,QF,QG
P☆ 6500 P1, P2, P3, P4, P5, P6, P7, P8, P9,PA,PB,PC,PD,PE,PF,PG
☆ : "0" (Whole bin) "M" (Quarter bin) or K (kitting bin)
17 18 Luminous Flux SA Bin
Code: SA
7
a) Luminous Flux Bins (IF = 50 mA, Ts= 25ºC)
CRI (Ra) Min.
Nominal CCT (K)
Product Code Flux Bin Flux Range
(Φv, lm)
90
2700 SPMWH12245Q7W8W☆SA SA 80 ~ 90
3000 SPMWH12245Q7W8V☆SA SA 83 ~ 93
3500 SPMWH12245Q7W8U☆SA SA 86 ~ 96
4000 SPMWH12245Q7W8T☆SA SA 90 ~ 100
5000 SPMWH12245Q7W8R☆SA SA 92 ~ 102
5700 SPMWH12245Q7W8Q☆SA SA 91 ~ 101
6500 SPMWH12245Q7W8Q☆SA SA 90 ~ 100
Note:
"☆" can be "0" (Whole bin), "M" (Quarter bin) or K (Kitting bin) of the color binning
8
b) Kitting rule
1) Kitting bin Concept
1. Under agreement between customer and SAMSUNG ELECTRONICS, SAMSUNG can supply kitting bin (VF, Color, lm).
2. A forward voltage (VF) of kitting bin is combined by a pair of same VF rank such as (A2+A2), (A3+A3), (A4+A4) or
(A5+A5).
3. A Chromaticity Coordinates of kitting bin is mixed by kitting procedure.(below kitting simulation)
[Kitting example]
[Binning Information]
Bin #1 Bin #2
VF
A2 A2
A3 A3
A4 A4
A5 A5
CIE
1, 2, 5 bin C, F, G bin
6, 7, A, B bin 6, 7, A, B bin
3, 4, 8 bin 9, D, E bin
9
c) Color Bins (IF = 50 mA, Ts= 25 ºC)
CRI (Ra) Min.
Nominal CCT (K)
Product Code Color Rank Chromaticity Bins
90
2700
SPMWH12245Q7W8W0SA W0 (Whole bin) W1, W2, W3, W4, W5, W6, W7, W8, W9, WA, WB, WC, WD, WE, WF, WG
SPMWH12245Q7W8WMSA WM (Quarter bin) W6, W7, WA, WB
SPMWH12245Q7W8WKSA WK (Kitting bin) W1, W2, W3, W4, W5, W6, W7, W8, W9, WA, WB, WC, WD, WE, WF, WG
3000
SPMWH12245Q7W8V0SA V0 (Whole bin) V1, V2, V3, V4, V5, V6, V7, V8, V9, VA, VB, VC, VD, VE, VF, VG
SPMWH12245Q7W8VMSA VM (Quarter bin) V6, V7, VA, VB
SPMWH12245Q7W8VKSA VK (Kitting bin) V1, V2, V3, V4, V5, V6, V7, V8, V9, VA, VB, VC, VD, VE, VF, VG
3500
SPMWH12245Q7W8U0SA U0 (Whole bin) U1, U2, U3, U4, U5, U6, U7, U8, U9, UA, UB, UC, UD, UE, UF, UG
SPMWH12245Q7W8UMSA UM (Quarter bin) U6, U7, UA, UB
SPMWH12245Q7W8UKSA UK (Kitting bin) U1, U2, U3, U4, U5, U6, U7, U8, U9, UA, UB, UC, UD, UE, UF, UG
4000
SPMWH12245Q7W8T0SA T0 (Whole bin) T1, T2, T3, T4, T5, T6, T7, T8, T9, TA, TB, TC, TD, TE, TF, TG
SPMWH12245Q7W8TMSA TM (Quarter bin) T6, T7, TA, TB
SPMWH12245Q7W8TKSA TK (Kitting bin) T1, T2, T3, T4, T5, T6, T7, T8, T9, TA, TB, TC, TD, TE, TF, TG
5000
SPMWH12245Q7W8R0SA R0 (Whole bin) R1, R2, R3, R4, R5, R6, R7, R8, R9
RA,RB,RC,RD,RE,RF,RG
SPMWH12245Q7W8RMSA RM (Quarter bin) R6, R7, RA, RB
SPMWH12245Q7W8RKSA RK (Kitting bin) R1, R2, R3, R4, R5, R6, R7, R8, R9
RA,RB,RC,RD,RE,RF,RG
5700
SPMWH12245Q7W8Q0SA Q0 (Whole bin) Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9
QA,QB,QC,QD,QE,QF,QG
SPMWH12245Q7W8QMSA QM (Quarter bin) Q6, Q7, QA, QB
SPMWH12245Q7W8QKSA QK (Kitting bin) Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9
QA,QB,QC,QD,QE,QF,QG
6500
SPMWH12245Q7W8P0SA P0 (Whole bin) P1, P2, P3, P4, P5, P6, P7, P8, P9
PA,PB,PC,PD,PE,PF,PG
SPMWH12245Q7W8PMSA PM (Quarter bin) P6, P7, PA, PB
SPMWH12245Q7W8PKSA PK (Kitting bin) P1, P2, P3, P4, P5, P6, P7, P8, P9
PA,PB,PC,PD,PE,PF,PG
10
d) Voltage Bins (IF = 50 mA, Ts = 25 ºC)
CRI (Ra) Min.
Nominal CCT (K)
Product Code Voltage Rank Voltage Bin Voltage Range
(V)
- - -
W8
or
WK
A2 16 ~ 17
A3 17 ~ 18
A4 18 ~ 19
A5 19 ~ 20
12
e) Chromaticity Region & Coordinates
Region CIE x CIE y Region CIE x CIE y
W rank (2700 K)
W1
0.4417 0.3921
W9
0.4513 0.4107
0.4465 0.4014 0.4560 0.4200
0.4519 0.4026 0.4618 0.4213
0.4470 0.3933 0.4569 0.4120
W2
0.4470 0.3933
WA
0.4569 0.4120
0.4519 0.4026 0.4618 0.4213
0.4573 0.4039 0.4676 0.4226
0.4522 0.3946 0.4625 0.4132
W3
0.4522 0.3946
WB
0.4625 0.4132
0.4573 0.4039 0.4676 0.4226
0.4628 0.4051 0.4734 0.4238
0.4575 0.3958 0.4681 0.4145
W4
0.4575 0.3958
WC
0.4681 0.4145
0.4628 0.4051 0.4734 0.4238
0.4682 0.4064 0.4792 0.4251
0.4627 0.3970 0.4737 0.4158
W5
0.4465 0.4014
WD
0.4560 0.4200
0.4513 0.4107 0.4608 0.4293
0.4569 0.4120 0.4668 0.4306
0.4519 0.4026 0.4618 0.4213
W6
0.4519 0.4026
WE
0.4618 0.4213
0.4569 0.4120 0.4668 0.4306
0.4625 0.4132 0.4728 0.4319
0.4573 0.4039 0.4676 0.4226
W7
0.4573 0.4039
WF
0.4676 0.4226
0.4625 0.4132 0.4728 0.4319
0.4681 0.4145 0.4787 0.4332
0.4628 0.4051 0.4734 0.4238
W8
0.4628 0.4051
WG
0.4734 0.4238
0.4681 0.4145 0.4787 0.4332
0.4737 0.4158 0.4847 0.4345
0.4682 0.4064 0.4792 0.4251
Region CIE x CIE y Region CIE x CIE y
V rank (3000 K)
V1
0.4188 0.3845
V9
0.4267 0.4026
0.4227 0.3936 0.4306 0.4117
0.4287 0.3955 0.4369 0.4137
0.4245 0.3864 0.4328 0.4046
V2
0.4245 0.3864
VA
0.4328 0.4046
0.4287 0.3955 0.4369 0.4137
0.4346 0.3975 0.4433 0.4158
0.4303 0.3883 0.4390 0.4067
V3
0.4303 0.3883
VB
0.4390 0.4067
0.4346 0.3975 0.4433 0.4158
0.4405 0.3994 0.4497 0.4179
0.4360 0.3902 0.4451 0.4087
V4
0.4360 0.3902
VC
0.4451 0.4087
0.4405 0.3994 0.4497 0.4179
0.4465 0.4014 0.4560 0.4200
0.4417 0.3921 0.4513 0.4107
V5
0.4227 0.3936
VD
0.4306 0.4117
0.4267 0.4026 0.4345 0.4207
0.4328 0.4046 0.4411 0.4229
0.4287 0.3955 0.4369 0.4137
V6
0.4287 0.3955
VE
0.4369 0.4137
0.4328 0.4046 0.4411 0.4229
0.4390 0.4067 0.4477 0.4250
0.4346 0.3975 0.4433 0.4158
V7
0.4346 0.3975
VF
0.4433 0.4158
0.4390 0.4067 0.4477 0.4250
0.4451 0.4087 0.4542 0.4272
0.4405 0.3994 0.4497 0.4179
V8
0.4405 0.3994
VG
0.4497 0.4179
0.4451 0.4087 0.4542 0.4272
0.4513 0.4107 0.4608 0.4293
0.4465 0.4014 0.4560 0.4200
13
e) Chromaticity Region & Coordinates
Region CIE x CIE y Region CIE x CIE y
U rank (3500 K)
U1
0.3935 0.3732
U9
0.3988 0.3895
0.3962 0.3813 0.4015 0.3976
0.4028 0.3844 0.4087 0.4011
0.3998 0.3760 0.4058 0.3927
U2
0.3998 0.3760
UA
0.4058 0.3927
0.4028 0.3844 0.4087 0.4011
0.4094 0.3874 0.4160 0.4046
0.4062 0.3789 0.4127 0.3960
U3
0.4062 0.3789
UB
0.4127 0.3960
0.4094 0.3874 0.4160 0.4046
0.4161 0.3905 0.4233 0.4081
0.4125 0.3817 0.4197 0.3993
U4
0.4125 0.3817
UC
0.4197 0.3993
0.4161 0.3905 0.4233 0.4081
0.4227 0.3936 0.4306 0.4117
0.4188 0.3845 0.4267 0.4026
U5
0.3962 0.3813
UD
0.4015 0.3976
0.3988 0.3895 0.4041 0.4057
0.4058 0.3927 0.4117 0.4095
0.4028 0.3844 0.4087 0.4011
U6
0.4028 0.3844
UE
0.4087 0.4011
0.4058 0.3927 0.4117 0.4095
0.4127 0.3960 0.4193 0.4132
0.4094 0.3874 0.4160 0.4046
U7
0.4094 0.3874
UF
0.4160 0.4046
0.4127 0.3960 0.4193 0.4132
0.4197 0.3993 0.4269 0.4170
0.4161 0.3905 0.4233 0.4081
U8
0.4161 0.3905
UG
0.4233 0.4081
0.4197 0.3993 0.4269 0.4170
0.4267 0.4026 0.4345 0.4207
0.4227 0.3936 0.4306 0.4117
Region CIE x CIE y Region CIE x CIE y
T rank (4000 K)
T1
0.3717 0.3626
T9
0.3750 0.3774
0.3734 0.37 0.3767 0.3848
0.3793 0.3737 0.3831 0.3889
0.3774 0.3661 0.3812 0.3813
T2
0.3774 0.3661
TA
0.3812 0.3813
0.3793 0.3737 0.3831 0.3889
0.3853 0.3773 0.3896 0.3929
0.3832 0.3695 0.3875 0.3851
T3
0.3832 0.3695
TB
0.3875 0.3851
0.3853 0.3773 0.3896 0.3929
0.3913 0.381 0.3961 0.3970
0.3889 0.373 0.3937 0.3890
T4
0.3889 0.373
TC
0.3937 0.3890
0.3913 0.381 0.3961 0.3970
0.3973 0.3846 0.4026 0.4010
0.3946 0.3764 0.4000 0.3928
T5
0.3734 0.37
TD
0.3767 0.3848
0.375 0.3774 0.3783 0.3922
0.3812 0.3813 0.3851 0.3965
0.3793 0.3737 0.3831 0.3889
T6
0.3793 0.3737
TE
0.3831 0.3889
0.3812 0.3813 0.3851 0.3965
0.3875 0.3851 0.3918 0.4007
0.3853 0.3773 0.3896 0.3929
T7
0.3853 0.3773
TF
0.3896 0.3929
0.3875 0.3851 0.3918 0.4007
0.3937 0.389 0.3986 0.4050
0.3913 0.381 0.3961 0.3970
T8
0.3913 0.381
TG
0.3961 0.3970
0.3937 0.389 0.3986 0.4050
0.4 0.3928 0.4053 0.4092
0.3973 0.3846 0.4026 0.401
14
e) Chromaticity Region & Coordinates
Region CIE x CIE y Region CIE x CIE y
R rank (5000 K)
R1
0.3410 0.3428
R9
0.3415 0.3552
0.3413 0.3490 0.3418 0.3613
0.3451 0.3521 0.3460 0.3648
0.3447 0.3458 0.3455 0.3584
R2
0.3447 0.3458
RA
0.3455 0.3584
0.3451 0.3521 0.3460 0.3648
0.3490 0.3552 0.3502 0.3682
0.3484 0.3487 0.3496 0.3617
R3
0.3484 0.3487
RB
0.3496 0.3617
0.3490 0.3552 0.3502 0.3682
0.3529 0.3583 0.3544 0.3716
0.3521 0.3517 0.3536 0.3650
R4
0.3521 0.3517
RC
0.3536 0.3650
0.3529 0.3583 0.3544 0.3716
0.3567 0.3614 0.3586 0.3751
0.3558 0.3546 0.3577 0.3683
R5
0.3413 0.3490
RD
0.3418 0.3613
0.3415 0.3552 0.3420 0.3675
0.3455 0.3584 0.3464 0.3711
0.3451 0.3521 0.3460 0.3648
R6
0.3451 0.3521
RE
0.3460 0.3648
0.3455 0.3584 0.3464 0.3711
0.3496 0.3617 0.3508 0.3747
0.3490 0.3552 0.3502 0.3682
R7
0.3490 0.3552
RF
0.3502 0.3682
0.3496 0.3617 0.3508 0.3747
0.3536 0.3650 0.3551 0.3783
0.3529 0.3583 0.3544 0.3716
R8
0.3529 0.3583
RG
0.3544 0.3716
0.3536 0.3650 0.3551 0.3783
0.3577 0.3683 0.3595 0.3819
0.3567 0.3614 0.3586 0.3751
Region CIE x CIE y Region CIE x CIE y
Q rank (5700 K)
Q1
0.3270 0.3305
Q9
0.3263 0.3415
0.3266 0.3360 0.3259 0.3469
0.3303 0.3392 0.3298 0.3505
0.3305 0.3336 0.3301 0.3449
Q2
0.3305 0.3336
QA
0.3301 0.3449
0.3303 0.3392 0.3298 0.3505
0.3339 0.3425 0.3338 0.3541
0.3340 0.3367 0.3339 0.3483
Q3
0.3340 0.3367
QB
0.3339 0.3483
0.3339 0.3425 0.3338 0.3541
0.3376 0.3457 0.3378 0.3577
0.3375 0.3397 0.3377 0.3517
Q4
0.3375 0.3397
QC
0.3377 0.3517
0.3376 0.3457 0.3378 0.3577
0.3413 0.3490 0.3418 0.3613
0.3410 0.3428 0.3415 0.3552
Q5
0.3266 0.3360
QD
0.3259 0.3469
0.3263 0.3415 0.3255 0.3524
0.3301 0.3449 0.3296 0.3562
0.3303 0.3392 0.3298 0.3505
Q6
0.3303 0.3392
QE
0.3298 0.3505
0.3301 0.3449 0.3296 0.3562
0.3339 0.3483 0.3338 0.3600
0.3339 0.3425 0.3338 0.3541
Q7
0.3339 0.3425
QF
0.3338 0.3541
0.3339 0.3483 0.3338 0.3600
0.3377 0.3517 0.3379 0.3637
0.3376 0.3457 0.3378 0.3577
Q8
0.3376 0.3457
QG
0.3378 0.3577
0.3377 0.3517 0.3379 0.3637
0.3415 0.3552 0.3420 0.3675
0.3413 0.3490 0.3418 0.3613
15
e) Chromaticity Region & Coordinates
Region CIE x CIE y Region CIE x CIE y
P rank (6500 K)
P1
0.3115 0.3186
P9
0.3095 0.3282
0.3105 0.3234 0.3085 0.3329
0.3145 0.3273 0.3128 0.3372
0.3153 0.3223 0.3136 0.3322
P2
0.3153 0.3223
PA
0.3136 0.3322
0.3145 0.3273 0.3128 0.3372
0.3185 0.3311 0.3171 0.3414
0.3192 0.326 0.3178 0.3363
P3
0.3192 0.326
PB
0.3178 0.3363
0.3185 0.3311 0.3171 0.3414
0.3224 0.335 0.3214 0.3457
0.323 0.3297 0.3219 0.3403
P4
0.323 0.3297
PC
0.3219 0.3403
0.3224 0.335 0.3214 0.3457
0.3264 0.3389 0.3257 0.3499
0.3268 0.3334 0.3261 0.3444
P5
0.3105 0.3234
PD
0.3085 0.3329
0.3095 0.3282 0.3075 0.3377
0.3136 0.3322 0.3120 0.3421
0.3145 0.3273 0.3128 0.3372
P6
0.3145 0.3273
PE
0.3128 0.3372
0.3136 0.3322 0.3120 0.3421
0.3178 0.3363 0.3164 0.3466
0.3185 0.3311 0.3171 0.3414
P7
0.3185 0.3311
PF
0.3171 0.3414
0.3178 0.3363 0.3164 0.3466
0.3219 0.3403 0.3209 0.3510
0.3224 0.335 0.3214 0.3457
P8
0.3224 0.335
PG
0.3214 0.3457
0.3219 0.3403 0.3209 0.3510
0.3261 0.3444 0.3253 0.3554
0.3264 0.3389 0.3257 0.3499
Note: Samsung maintains measurement tolerance of: Cx, Cy = ± 0.005
16
3. Typical Characteristics Graphs
a) Spectrum Distribution (IF = 50 mA, Ts = 25 ºC)
CCT: 2700 K (90 CRI) CCT: 3000 K (90 CRI)
CCT: 3500 K (90 CRI) CCT: 4000 K (90 CRI)
CCT: 5000 K (90 CRI) CCT: 5700 K (90 CRI)
17
CCT: 6500 K (80 CRI)
b) Forward Current Characteristics (Ts = 25 ºC)
c) Temperature Characteristics (IF = 50 mA)
18
d) Color Shift Characteristics (IF = 50 mA, Ts = 25 ºC)
e) Derating Curve
f) Beam Angle Characteristics (IF = 50 mA, Ts = 25 ºC)
19
4. Outline Drawing & Dimension
Notes:
1) Ts point and measurement method:
① Measure one point at the cathode pad, if necessary remove PSR of PCB to reach Ts point.
② All pads must be soldered to the PCB to dissipate heat properly, otherwise the LED can be damaged.
Precautions:
1) Pressure on the LEDs will influence to the reliability of the LEDs. Precautions should be taken to avoid strong pressure on
the LEDs. Do not put stress on the LEDs during heating.
2) Re-soldering should not be done after the LEDs have been soldered. If re-soldering is unavoidable, LED`s characteristics
should be carefully checked before and after such repair.
3) Do not stack assembled PCBs together. Since materials of LEDs is soft, abrasion between two PCB assembled with LED
might cause catastrophic failure of the LEDs.
Measurement unit: mm
Tolerance: ±0.1mm
20
5. Reliability Test Items & Conditions
a) Test Items
Test Item Test Condition Test
Hour / Cycle Sample No.
Room Temperature Life Test
25 ºC, DC 55 mA 1000 h 22
High Temperature Life Test
85 ºC, DC 55 mA 1000 h 22
High Temperature Humidity Life Test
85 ºC, 85 % RH, DC 55 mA 1000 h 22
Low Temperature Life Test
-40 ºC, DC 55 mA 1000 h 22
Powered Temperature Cycle Test
-45 ºC ~ 85 ºC, each 20 min, on/off 5 min Temp. Change time 100min, DC 55 mA
100 cycles 22
Temperature Cycle -45ºC / 15 min ↔ 125 ºC / 15 min 200 cycles 100
High Temperature Storage
120 ºC 1000 h 11
Low Temperature Storage
-40 ºC 1000 h 11
ESD (HBM)
R1: 10
R2
C: 100 pF
V: ± 2 kV 5 times 30
b) Criteria for Judging the Damage
Item Symbol Test Condition
(Ts = 25 ºC)
Limit
Min Max
Forward Voltage VF IF = 50 mA Init. Value * 0.9 Init. Value * 1.1
Luminous Flux Φv IF = 50 mA Init. Value * 0.7 Init. Value * 1.1
21
6. Soldering Conditions
a) Reflow Conditions (Pb free)
Reflow frequency: 2 times max.
b) Manual Soldering Conditions
Not more than 5 seconds @ max. 300 ºC, under soldering iron.
23
b) Reel Dimension ( max 4,000 pcs)
(unit: mm)
Notes:
1) Quantity: The quantity/reel is 4,000 pcs
2) All dimensions are millimeters (tolerance : ±0.2mm)
3) Packaging: P/N, Manufacturing data code no. and quantity are indicated on the aluminum packing bag
24
c) Reel Dimension (max 12,000 pcs)
(unit: mm)
Notes:
1) Quantity: The quantity/reel is 12,000 pcs
2) All dimensions are millimeters (tolerance : ±0.2mm)
3) Packaging: P/N, Manufacturing data code no. and quantity are indicated on the aluminum packing bag
25
A4R1SA
SPMWH12245Q7W8R0SA A4R1SA
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII G3AYC4001 / 10AA / 4000 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
Bin Code
Product Code
Lot Number
A4R1SA
SPMWH12245Q7W8R0SA A4R1SA
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII ①②③④⑤⑥⑦⑧⑨/1ⓐⓑⓒ/ 4,000 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
8. Label Structure
a) Label Structure
Note: Denoted bin code and product code above is only an example (see description on page 6)
Bin Code:
ⓐⓑ: Forward Voltage bin (refer to page 10)
ⓒⓓ: Chromaticity bin (refer to page 11~18)
ⓔⓕ: Luminous Flux bin (refer to page 7)
b) Lot Number
The lot number is composed of the following characters:
①②③④⑤⑥⑦⑧⑨ / 1ⓐⓑⓒ / 4,000 pcs
① : Production site (S: Giheung, Korea, G: Tianjin, China)
② : 3 (LED)
③ : Product state (A: Normal, B: Bulk, C: First Production, R: Reproduction, S: Sample)
④ : Year (Z: 2015, A: 2016, B: 2017
⑤ : Month (1~9, A, B, C)
⑥ : Day (1~9, A, B~V)
⑦⑧⑨ ⓐⓑⓒ : Product serial number
ⓐⓑⓒⓓⓔⓕ
26
A4R1SA
SPMWH12245Q7W8R0SA A4R1SA
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII G3AYC4001 / 10AA / 4000 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
A4R1SA
SPMWH12245Q7W8R0SA A4R1SA
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII G3AYC4001 / 10AA / 40000 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
A4R1SA
SPMWH12245Q7W8R0SA A4R1SA
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII G3AYC4001 / 10AA / 4000 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
9. Packing Structure
a) Packing Process (The quantity of PKG on the Reel to be Max 4,000 pcs)
Material: Paper (SW3B(B))
Type Size (mm)
Note L W H
7 inch L 245 ± 5 220 ± 5 182 ± 5 Up to 10 reels
7 inch S 245 ± 5 220 ± 5 86 ± 5 Up to 5 reels
Reel
Aluminum Vinyl Packing Bag
Outer Box
LED
①
H
W
L
① Side Label
27
A4R1SA
SPMWH12245Q7WKR0SA A4R1SA
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII G3AYC4001 / 10AA / 12000 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
A4R1SA
SPMWH12245Q7WKR0SA A4R1SA
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII G3AYC4001 / 10AA / 12000 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
A4R1SA
SPMWH12245Q7WKR0SA A4R1SA
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII G3AYC4001 / 10AA / 180000 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
b) Packing Process (The quantity of PKG on the Reel to be Max 12,000 pcs)
Reel
Outer Box
Aluminum Vinyl Packing Bag
28
A3★1SA SPMWH12245Q7W8★KSA A3★1SA
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
G3AW94001 / 10AA / 4,000 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
A3★1SA
SPMWH12245Q7W8★KSA A3★1SA
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
G3AW94001 / 10AA / 4,000 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
A3★CSA
SPMWH12245Q7W8★KSA A3★CSA
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
G3AW94001 / 10AA / 4,000 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
A3★CSA SPMWH12245Q7W8★KSA A3★CSA
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
G3AW94001 / 10AA / 4,000 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
A3★1SA
SPMWH12245Q7W8★KSA A3★1SA
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
G3AW94001 / 10AA / 20,000 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
[BOX Label]
A3★CSA
SPMWH12245Q7W8★KSA A3★CSA
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
G3AW94001 / 10AA / 20,000 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
[BOX Label]
c) Packing Process for kitting
Material: Paper (SW3B(B))
Type Size (mm)
Note L W H
7 inch L 245 ± 5 220 ± 5 182 ± 5 Up to 10 reels
Reel
Aluminum Vinyl Packing Bag
B
B
A
Outer Box
LED
AB
AB
AB
AB
AB
29
d) Aluminum Vinyl Packing Bag
d) Humidity Indicator Card inside Aluminum Vinyl Bag
A4R1SA
SPMWH12245Q7W8R0SA A4R1SA AA
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII G3AYC4001 / 10AA / 4000 pcs
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
30
10. Precautions in Handling & Use
1) For over-current protection, users are recommended to apply resistors connected in series with the LEDs to mitigate
sudden change of the forward current caused by shift of forward voltage.
2) This device should not be used in any type of fluid such as water, oil, organic solvent, etc. When cleaning is required,
IPA is recommended as the cleaning agent. Some solvent-based cleaning agent may damage the silicone resins used
in the device.
3) When the device is in operation, the forward current should be carefully determined considering the maximum ambient
temperature and corresponding junction temperature.
4) LEDs must be stored in a clean environment. If the LEDs are to be stored for three months or more after being shipped
from Samsung, they should be packed with a nitrogen-filled container (shelf life of sealed bags is 12 months at
temperature 0~40 ºC, 0~90 % RH).
5) After storage bag is opened, device subjected to soldering, solder reflow, or other high temperature processes must be:
a. Mounted within 672 hours (28 days) at an assembly line with a condition of no more than 30 ºC / 60 % RH*Note 1, or
b. Mounted within 24 hours (1 day) at an assembly line with a condition of more than 30 ºC / 70 % RH*Note 2, or
c. Stored at <10 % RH.
*Note 1, 2: IPC/JEDEC J-STD-033A, Recommended Equivalent Total Floor Life Table
6) Repack unused devices with anti-moisture packing, fold to close any opening and then store in a dry place.
7) Devices require baking before mounting, if humidity card reading is >60 % at 23 ± 5 ºC.
8) Devices must be baked for 1 hour at 60 ± 5 ºC, if baking is required.
9) The LEDs are sensitive to the static electricity and surge current. It is recommended to use a wrist band or anti-
electrostatic glove when handling the LEDs. If voltage exceeding the absolute maximum rating is applied to LEDs, it
may cause damage or even destruction to LED devices. Damaged LEDs may show some unusual characteristics such
as increase in leakage current, lowered turn-on voltage, or abnormal lighting of LEDs at low current.
10) VOCs (Volatile Organic Compounds) can be generated from adhesives, flux, hardener or organic additives used in
luminaires (fixtures). Transparent LED silicone encapsulant is permeable to those chemicals and they may lead to a
discoloration of encapsulant when they exposed to heat or light. This phenomenon can cause a significant loss of light
emitted (output) from the luminaires. In order to prevent these problems, we recommend users to know the physical
properties of materials used in luminaires and they must be carefully selected.
11) Risk of sulfurization (or tarnishing)
The LED from Samsung uses a silver-plated lead frame and its surface color may change to black (or dark colored) when
it is exposed to sulfur (S), chlorine (Cl) or other halogen compound. Sulfurization of lead frame may cause intensity
degradation, change of chromaticity coordinates and, in extreme cases, open circuit. It requires caution. Due to possible
sulfurization of lead frame, LED should not be used and stored together with oxidizing substances made of materials
such as rubber, plain paper, lead solder cream, etc.
Legal and additional information.
About Samsung Electronics Co., Ltd.
Samsung Electronics Co., Ltd. is a global leader in technology,
opening new possibilities for people everywhere. Through relentless
innovation and discovery, we are transforming the worlds of
TVs, smartphones, tablets, PCs, cameras, home appliances, printers,
LTE systems, medical devices, semiconductors and LED solutions.
To discover more, please visit www.samsungled.com.
Copyright © 2017 Samsung Electronics Co., Ltd. All rights reserved.
Samsung is a registered trademark of Samsung Electronics Co., Ltd.
Specifications and designs are subject to change without notice. Non-metric
weights and measurements are approximate. All data were deemed correct
at time of creation. Samsung is not liable for errors or omissions. All brand, product,
service names and logos are trademarks and/or registered trademarks of their
respective owners and are hereby recognized and acknowledged.
Samsung Electronics Co., Ltd.
95, Samsung 2-ro
Giheung-gu
Yongin-si, Gyeonggi-do, 446-711
KOREA
www.samsungled.com