LOGO

APPLICATION OF A PARCEL

Agenda

APPLICATION FOR PROJECT

BUILDING OPERATIONS

1 ) Without help account application

APPLICATION OF A PARCEL

-- How can we make the applications?

2 ) With help account application

APPLICATION FOR PROJECT

Made their plans, construction projects, road projects, rail projects, landscaping, etc. related to the regulatory plan implementing projects on the ground is called the application.

Application, with the aim of making maps or plans that have been established in the field of polygonal points, etc.. benefit from such fixed points is done. Applications are often requiring precision.

How can we make the applications?

The geometry of an engineering services designed to meet the required accuracy must be transferred to land. Geometry of horizontal transfer of land application process is located.The best example to location application is application of the building in construction site.

Although the application of this method a lot, often applied in construction methods and should be referred to the map of engineering methods of measurement.

Showing the structure location: Building permit recipients, before beginning

construction, presented with a petition to the municipality where the display of the structure you want to do. Show where the process is as follows. As I, II, III, IV plots belonging to the turn of the measuring points are given sketch.The AB side of the building estimated to be paralel to the I, II boundary line and 5 meter inside. Corner point D estimated to be 3 meter inside from I, IV boundary lines. Application process,first D and after A corner points on the corner of the land to be made by pointing.

Building Operations

For it, can be viewed 2 different ways:

To the I, II boundary line 5 and 15 meter,to the I, IV bondary line 3 meter away paralel directions marked with range pole.The intersection point of

15 meter to the I, II boundary line with 3 meter to the I, IV boundary line is

the D point.So the A point is perpendicular to the AB front line from

D point.

1

Without help account application

*Finding α angle*Evaluation of IE and

IF distance*Determining A,B,C,D

points*Checking our

calculations with diogonals

2

With help account application

Application to control the length of AC and DC with BD are measured diagonally. Enclosed in square brackets in Figure 1.11 The dimensions of the control measure, while the contents in round brackets are calculated values. These points are marked, the point is hammered nails and application of business with the help of the rope secured to pier (Figure 11.2).

With range poled AB, BC, CD, and AD are true, correct way to string beads is transferred to a timber wharf. The wooden slats of the dock to transfer the ropes are made with nails. Nails, wire or rope attached to it AB, BC, CD and AD, and it shows the correct way to rope in construction work is carried

out correctly.

LOGO