longspan & minipal - link51trade.com trade... · br ac i ngt es, h lfp zinc plated *as...
TRANSCRIPT
LONGSPAN PRICES January 2018Issue 1PAGE 1
CONTENTS
Note: All components are priced individually.Component illustrations are not to a constant scale. All dimensions are in mm
● Orders must clearly state any specially agreed terms, prices and discounts with any appropriate reference numbers.
Subsequent amendments may incur an administration charge of £75 and potentially jeopardise the previously agreed delivery date.
● Cancellation will only be accepted at our descretion and if acceptedthe cancellation charge could be up to 100% of the order value.
● Orders up to £15 nett will incur a small order charge of £10.00
● Orders under £300 nett value incur a £30 handling/delivery surcharge.
● Order acknowledgements will always show the latest planned delivery date.
● All list prices exclude VAT, which will be charged at the ruling rate atpoint of invoice.
● Credit Card payment facilities are available.
General Conditions
Delivery Conditions
Product Availability
Maximum SpeedRange order values, subject to availabilityand product mix, are as follows:
Product
Longspan
Minipal
List Price Value
£33,000
£10,000
● List prices are inclusive of standard delivery within the UK mainland only, Monday to Friday 8am to 5pm. All other deliveries on request.
● Orders may be despatched on multiple vehicles which may arrive on different days.
● Courier Overnight Service may be available on request, charged individually, minimum charge £30.
● The additional charge for a nominated delivery date for products will be £100.
● For a specific delivery time there is an additional charge of £50 on the above.
RECEIPT OF DELIVERIES
● Standard delivery is assumed to allow clear access by a vehicle - of up to 40ft trailer size - to a ground floor location.
● IMPORTANT NOTE: It is the responsibility of the Distributor/Specifier to ensure that adequate labour and/or manned handling equipment is available to off-load at the delivery point.
Additional charges may apply where these conditions are not met, unless otherwise agreed at time of order placement.
● Waiting time will be charged for any delay, should unloading not commence within 30 minutes of the vehicle arriving at the site.
● The charge will be at the rate of £55 per half hour up to a maximum of 1 hour, after which it will be at our discretion to pull off site.
● Failed and Repeat Delivery conditions would then apply.
FAILED AND REPEAT DELIVERIES
● Failed and Repeat Deliveries will be charged at cost dependant on location and required delivery date and time.
● If waiting time occurs prior to a failed delivery this will be charged at £55 per half-hour.
● Storage costs will be charged for any product that cannot be delivered by the agreed scheduled date.
RETURNS
● Returns will only be accepted at our discretion and on the basis that the product is from the SpeedRange, in its original packaging and in delivered condition.
● Collection will be charged at £200, together with an administration charge of 15% of the list price value.
ALL OF THE ABOVE MUST BE READ IN CONJUNCTION WITH OUR STANDARD TERMS AND CONDITIONS OF SALE.
The information contained in this price list was accepted as correct at thedate of publication. However, we reserve the right to make any necessarychanges, in line with product development and trading conditions.Although all reasonable care has been taken to make it as complete andaccurate as possible, no liability can be accepted for any inaccuracies oromissions. E+OE.Price list issued by: Whittan Industrial Limited© 2018 Whittan Industrial
Code
Colour/FinishAvailability
Colour/Finish
GX
GU
GW
GT
ZC
Graphite Grey (BS5252 18 A14) -frame uprights, accessories*
Light Grey (RAL 7035)
Light Grey (BS 00 A 05)
Pre-galvanised material - framebracing ties, shelf panels
Zinc Plated
*As indicated in part number
● RED prices are available on 'SpeedRange' delivery within 8working days.
● BLACK prices are available on 'Manufacture lead time' delivery within 18 working days, subject to availability.
● Order acknowledgments will always show the LATEST planned deliver by date, unless specific delivery dates have been agreed.
LONGSPAN PRICES January 2018Issue 1 PAGE 2Note: All components are priced individually.Component illustrations are not to a constant scale. All dimensions are in mm
LONGSPAN Shelving Components
1. Upright Cap
2. Frame (open)
3. Horizontal Frame Tie
4. Clamping Plate
5. Frame Joining Strap
6. Steel Panel Stepped Beam
7. Run Spacer
8. Stepped Beam (fitted in pairs)
9. Steel Frame Cladding
10. Chipboard Shelf (on stepped beam)
11. Shelf Cladding Support (stepped beams)
12. Wire Beam Tie
13. Chipboard Shelf (on box beam)
14. Cladding Location Bracket (box beam)
15. Shelf Cladding Support (box beam)
16. Box Beam (fitted in pairs)
17. Steel Shelf Panel Box Beam
18. Clip-on single Foot Plate
19. Clip-on double Foot Plate
20. Bolt-on standard duty Foot Plate
21. Bolt-on heavy-duty double Foot Plate
22. Bolt-on heavy-duty single Foot Plate
23. Levelling Shim (two types available)
24. Beam Locking Clip (two per beam)
25. Mesh Frame Cladding
26. Diagonal Frame Tie
27. Upright Extension Joint
27
4
5
3
26
25
24
21
22
18
19
20
23
17
16
6
7
1
9
2
10
11
12
13
14
15
8
Shelving exceeding a 4 to 1height to depth ratio mustbe floor fixed. Refer toTechnical Department forfurther information.
LONGSPAN PRICES January 2018Issue 1PAGE 3
LONGSPAN Shelving Components
0450 0600 0750 0900 1000 1200
1200LE – – – – NFGXGUQ1500LE – – – – NFGXGUQ 1800LE – – – – NFGXGUQ2100LE – – – – NFGXGUQ 2400LE – – – – NFGXGUQ 2700LE – – – – NFGXGUQ 3000LE – – – – NFGXGUQ 3300LE – – – – NFGXGUQ 3600LE – – – – NFGXGUQ3900LE – – – – NFGXGUQ4050LE – – – – NFGXGUQ
OPEN FRAMES £ each
HEIGHT MMDEPTH MM
LO = OPEN FRAME
Order footplates separately - see below
LE = STEEL CLADFRAME
LM = MESH CLADFRAME
0450 0600 0750 0900 1000 1200
1200LM – – – – NFGXQ 1500LM – – – – NFGXQ 1800LM – – – – NFGXQ2100LM – – – – NFGXQ 2400LM – – – – NFGXQ 2700LM – – – – NFGXQ 3000LM – – – – NFGXQ 3300LM – – – – NFGXQ 3600LM – – – – NFGXQ3900LM – – – – NFGXQ4050LM – – – – NFGXQ
HEIGHT MMDEPTH MM
HEIGHT MMDEPTH MM
STEEL CLAD FRAMES £ each MESH CLAD FRAMES £ each
ASSEMBLED FRAMES without footplates
L3GT INCL. BOLTS
SHKFPDFOR L3GT
SHKB1B2FOR
LSZC/LDZC
L2GT
L3GT
Kit comprises: 1-off1, 2 & 4mm thick shims**
Kit comprises: 1-off1, 2, & 4mm thick shims**
*Shims also available individually - P.O.A.
L1GT
LDZCDouble
LSZCSingle
Shim
FOOTPLATES & SHIMS £ eachPrices include upright fixings.Please note quantity restrictions apply.
UPRIGHT EXTENSIONJOINT £ each
Price Includes bolts& fixings
FRAME JOINING STRAPS £ each
BOLT-ON FOOTPLATE - Standard
BOLT-ON FOOTPLATES - Hi-rise/Multi-tier
*SHIM KITS FOR BOLT-ON FOOTPLATES
CLIP ON FOOTPLATES
UPRIGHT END CAP £ each
TWO are requiredper frame
CODE
LSEC 3.40
CODE
UEJZC 16.58
0450 0600 0750 0900 1000 1200
1200LO – – – – NFGXQ1350LO – – – – NFGXQ1500LO – – – – NFGXQ1650LO – – – – NFGXQ1800LO – – – – NFGXQ1950LO – – – – NFGXQ2100LO – – – – NFGXQ2250LO – – – – NFGXQ 2400LO – – – – NFGXQ2550LO – – – – NFGXQ 2700LO – – – – NFGXQ2850LO – – – – NFGXQ 3000LO – – – – NFGXQ3150LO – – – – NFGXQ3300LO – – – – NFGXQ3450LO – – – – NFGXQ3600LO – – – – NFGXQ3750LO – – – – NFGXQ3900LO – – – – NFGXQ4050LO – – – – NFGXQ
101.65 106.70 111.47 115.81 118.50 125.95118.73 125.74 131.99 137.90 141.58 150.96126.19 133.20 139.45 145.36 149.04 158.42133.57 140.58 146.83 152.74 156.42 165.80140.85 147.86 154.11 160.02 163.70 173.08148.63 155.64 161.89 167.80 171.48 180.86168.34 176.48 184.54 191.65 196.04 209.01185.55 195.65 205.19 213.87 219.25 234.15192.79 202.89 212.43 221.11 226.49 241.39200.25 210.35 219.89 228.57 233.95 248.85207.69 217.79 227.33 236.01 241.39 256.29214.97 225.07 234.61 243.29 248.67 263.57234.64 245.87 257.22 267.10 273.19 291.68251.81 265.00 277.83 289.28 296.36 316.78259.03 272.22 285.05 296.50 303.58 324.00266.37 279.56 292.39 303.84 310.92 331.34273.77 286.96 299.79 311.24 318.32 338.74281.29 294.48 307.31 318.76 325.84 346.26300.94 315.26 329.90 342.55 350.34 374.35317.92 334.20 350.32 364.54 373.32 399.26
141.30 159.22 177.21 195.07 206.63 229.79192.90 220.01 246.84 273.49 290.54 325.51221.05 251.22 280.52 310.00 328.73 367.22248.34 281.99 315.19 348.39 369.56 412.87275.24 312.57 349.48 386.42 410.03 458.09308.42 350.41 391.94 433.62 460.22 514.59335.33 380.74 426.20 471.62 500.72 559.85372.24 423.16 473.80 524.46 557.05 622.96399.10 453.73 508.12 561.92 597.18 667.96425.91 484.25 542.47 599.35 637.32 712.97439.34 526.72 590.04 618.02 657.38 744.52
150.03 168.41 186.77 204.24 216.03 241.15185.67 209.45 232.61 255.14 269.99 301.70211.66 238.73 265.19 290.97 308.20 344.24250.54 281.99 313.68 344.05 364.15 408.02286.15 323.07 359.58 394.73 418.10 468.50312.13 352.15 392.10 430.56 456.35 511.16350.40 395.17 440.17 483.19 511.78 574.52386.18 436.01 486.04 533.88 565.73 635.00411.93 464.26 518.59 569.90 603.79 677.36437.72 492.53 551.08 605.90 641.84 719.72450.60 506.68 596.99 623.91 660.83 740.92
CODE TYPE Price
L1GT SINGLE
L2GT DOUBLE
2.27
3.08
6.31
17.02
17.02
LSZC INCL. BOLTS
LDZC INCL. BOLTS
8.40
5.61
CODE
FJS 0.67
Note: All components are priced individually.Component illustrations are not to a constant scale. All dimensions are in mm
Please note quantity restrictions apply.
Please notequantity restrictionsapply.
Please note quantity restrictions apply.
LONGSPAN PRICES January 2018Issue 1 PAGE 4Note: All components are priced individually.Component illustrations are not to a constant scale. All dimensions are in mm
LONGSPAN Shelving Components
BEAMS without locking clips £ each
NOTE:
● Beam prices DO NOT include Locking Clips - 2 are required per Beam, see below.
● Prices for 2LSC, 2LST & 4LST Beams DO NOT include Wire Beam Ties: All 2LSC Beams must have a single beam tie. 2LST & 4LST Beams of 1800mm and up to and including 2700mm in length must have a single tie. Over 2700mm length, 2 wire ties are required.
● Connectors - ‘SC1’ denotes an angle connector type; LB070XC beams have ‘T’ connectors.
10501200135015001650180019502100225024002550270028503000
2LSC _ _ _ _ SC1GW 2LBC _ _ _ _ SC1GW LB070XC_ _ _ _TGW 2LST _ _ _ _ SC1GW 4LST _ _ _ _ SC1GWBEAM LENGTH MM
26.12 38.21 62.93 38.91 48.3728.83 42.58 68.81 43.43 54.0031.54 46.96 74.68 47.96 59.6334.24 51.33 80.56 52.49 65.2536.95 55.71 86.44 57.01 70.8839.66 60.09 92.31 61.54 76.51
64.46 98.19 66.06 82.1368.84 104.06 70.59 87.7673.21 109.94 75.11 93.3977.59 115.81 79.64 99.01
121.69 84.17 104.64127.56 88.69 110.27133.44 93.22 115.89139.32 97.74 121.52
2LSC 2LBC LB070XC 2LST 4LST
BEAM TYPE CODE £ each
2LBC CL25GT 1.26LB070 CL40GT 1.26
BLACK prices - delivery within 18working days subject toavailability.
CLADDING LOCATOR £ each
Run Spacers suppliedWITHOUT lockingclips - TWO required.
FRAME RUN SPACERS £ each
0100020003000400050006000700080009001000
LRS____GW11.8013.0314.0815.3416.5719.2120.3821.6122.6323.80
TWO are requiredper beam
WIRE BEAM TIES £ each
CODE
BLCZC 0.15
BEAM LOCKING CLIP £ each
CODEBEAMTYPE
DEPTH MM0450 0600 0750 0900 1000 1200
LSCLST
BSWT – – – – GT 1.54 1.77 1.99 2.18 2.26 2.62BSWT – – – – GP 1.77 1.89 2.11 2.40 2.60 2.88
Please note quantity restrictions apply.
Please note quantity restrictions apply.
BLACK prices - delivery within 18working days subject toavailability.
LONGSPAN PRICES January 2018Issue 1PAGE 5
LONGSPAN Shelving Components
Note: All components are priced individually.Component illustrations are not to a constant scale. All dimensions are in mm
SHELF CLADDINGSUPPORT FOR
BEAM TYPE LB070
SHELF CLADDING SUPPORT FOR
BEAM TYPE 2LST
SHELF CLADDING SUPPORT FOR
BEAM TYPE 4LST
SCS _ _ _ _ 2SB25GW SCS _ _ _ _2SB40GW SCS _ _ _ _ STBTH20GW SCS _ _ _ _ ST2SB20GW SCS _ _ _ _ STBTH27GW SCS _ _ _ _ ST2SB27GW
SHELF CLADDING SUPPORTS £ each
CODE & PRICE EACH
SHELF CLADDING SUPPORT FOR BEAMTYPES 2LSC AND 2LBC
24.64 24.64 15.34 18.97 16.40 20.0027.09 27.09 17.16 21.02 18.18 22.0829.12 29.12 19.01 23.05 20.00 24.0431.06 31.06 20.90 25.02 21.92 26.0532.51 32.51 22.08 26.59 23.07 27.6035.01 35.01 24.23 29.04 25.66 30.12
045006000750090010001200
045006000750090010001200
STANDARD DUTYTO SUIT 2LST
0300SSP _ _ _ _ STGT
FORFRAMEDEPTH:
PLAIN STEEL SHELF PANELS for 2LST BeamsiGalvatite Finish £ each
375mm WIDE PANEL
30.6034.5634.8238.8141.3747.02
300mm WIDE PANEL
045006000750090010001200
NOT AVAILABLE
045006000750090010001200
045006000750090010001200
STANDARD DUTY
600mm WIDE PANEL
MEDIUM DUTY HEAVY DUTYTO SUIT 2LBC AND 2LSC TO SUIT LB070XC TO SUIT 2LBC AND 2LSC TO SUIT LB070XC
0300MSP _ _ _ _ 40GT0300MSP _ _ _ _ 25GT0300SSP _ _ _ _ 40GT0300SSP _ _ _ _ 25GTTO SUIT 2LBC AND 2LSC TO SUIT LB070XC
0300HSP _ _ _ _ 40GT0300HSP _ _ _ _ 25GT
0450060007500900
FORFRAMEDEPTH:
PLAIN STEEL SHELF PANELS £ each
375mm WIDE PANEL
34.8942.4449.8657.18
34.8942.4449.8657.18
300mm WIDE PANEL
Please note quantity restrictions apply. 120 maximum quantity to achieve speed lead time.
30.16 30.16 33.28 33.28 40.20 40.2029.88 29.88 33.87 33.87 42.91 42.9133.13 33.13 37.96 37.96 49.13 49.1336.41 36.41 42.07 42.07 55.37 55.3738.92 38.92 45.31 45.31 59.94 59.9443.35 43.35 50.99 50.99 68.27 68.27
32.17 32.17 35.82 35.82 44.16 44.1632.41 32.41 37.23 37.23 48.15 48.1536.41 36.41 42.07 42.07 55.37 55.3740.20 40.20 47.02 47.02 62.75 62.7543.18 43.18 50.83 50.83 67.99 67.9948.43 48.43 57.34 57.34 77.89 77.89
28.7731.9931.7334.9837.2342.07
Please note quantity restrictions apply. 100 maximum quantity to achieve speed lead time.
LONGSPAN PRICES January 2018Issue 1 PAGE 6Note: All components are priced individually.Component illustrations are not to a constant scale. All dimensions are in mm
LONGSPAN Tube Beam Components
SHKB3B4FOR LB3ZC
Kit comprises: 1-off1, 2, & 4mm thick shims
FOOTPLATES & SHIMS £ eachPrices includeupright fixings.
SHIM KITS FOR BOLT-ON FOOTPLATES
INDIVIDUAL SHIMS
BOLT-ON FOOTPLATES - Hi-rise/Multi-tier
CODE TYPE Price
48.09
7.50
1.122.114.27
LB3ZC INCL. BOLTS
SH1B3B4 1mm thickSH2B3B4 2mm thickSH4B3B4 4mm thick
HEIGHT MMDEPTH MM
0500
147.85176.49202.92245.90
1800LHG0500NFGWQ2100LHG0500NFGWQ 2400LHG0500NFGWQ3000LHG0500NFGWQ
LENGTH MM
TUBE BEAMS £ each
12001350150016501800
BEAM LOCKING PIN £ eachCODE
ZD 0.27
STANDARD FLOOR FIXING £ eachCODE
FD12058C 1.77
TWO are requiredper beam
1. Upright Cap2. Frame (open)3. Horizontal Frame Tie4. Diagonal Frame Tie5. Tube Beam (fitted in pairs)6. Beam Locking Clip (two per beam)7. Bolt-on heavy-duty single Foot Plate8. Levelling Shim (two types available)9. Heavy floor fixing suitable for
concrete floor.
Shelving must be floor fixed. Refer toTechnical Department for further information.
Minimum 2 bay run with 2 beam levelsequally spaced in the heightup to 2400mm. Over 2400mm high andup to 3000mm high, 3 beam levelsequally spaced in the height.
Quantity restrictions may apply.
1
2
3
4
5
78
6
9
TWO are requiredper footplate
LTB____GW
29.96
29.96
35.10
35.10
37.68
TUBE BEAM FRAMES £ each
MINIPAL PRICES January 2018Issue 1PAGE 7
MINIPAL Shelving Components
Beam Length mm
1800
2100
2400
Code
MNVE1800GT
MNVE2100GT
MNVE2400GT
£ Price Each
35.91
41.91
47.89
Frame Height mm
1800
2100
2400
2700
Frame Depth mm
450
600
900
1200
450
600
900
1200
450
600
900
1200
450
600
900
1200
Code
K1800MN0450ANFGT
K1800MN0600ANFGT
K1800MN0900ANFGT
K1800MN1200ANFGT
K2100MN0450ANFGT
K2100MN0600ANFGT
K2100MN0900ANFGT
K2100MN1200ANFGT
K2400MN0450ANFGT
K2400MN0600ANFGT
K2400MN0900ANFGT
K2400MN1200ANFGT
K2700MN0450ANFGT
K2700MN0600ANFGT
K2700MN0900ANFGT
K2700MN1200ANFGT
£ Price Each
80.18
85.69
97.55
126.37
89.94
94.91
106.08
134.64
104.10
110.39
124.20
158.64
113.82
119.57
132.69
166.86
Includes spacers and Nuts, Bolts & Washers.
Excludes footplates.
Order Locking Pins seperately - 2 per beam.
Order 2 per beam.
Code
MNSEZC
£ Price Each
0.30
Includes 2 off shelf brackets and1 off bracing channel
Description
Bracket
900mm Frame Depth
1200mm Frame Depth
Code
MNSCSBKTZC
MNSCS0900GT
MNSCS1200GT
£ Price Each
2.30
9.60
11.13
Order 2 sets per footplate.
Code
SP88M8HH16ZC
NYM8ZC
WM8ZC
Description
M8 x 16 Bolt
Nyloc Nut
Washer
£ Price Each
0.21
0.27
0.27
Code
MNPNZC
£ Price Each
3.39M10 threaded into 12mmdiameter hole x 58mm long.
CodeFD12058C
£ Price Each
1.77
Code
MNSH15
£ Price Each
1.07
BEAMS £ each
FRAMES - supplied KD £ each
NUT, BOLT & WASHER £ each
FLOOR FIXING £ each
DECKING SUPPORT £ each
LOCKING CLIP £ each
FOOTPLATE £ each
SHIM £ each
RED prices - Speedrange deliverywithin 8 working days .
The information contained in this leaflet was accepted as correct at the date of publication.Although all reasonable care has been taken to make itcomplete and accurate as possible,no liability can be accepted for any inaccuracies or omissions. E + OE.